1. Mousavi G, S.M., An autonomous hybrid energy system of wind/tidal/microturbine/battery storage.

International Journal of Electrical Power & Energy Systems, 2012. 43(1): p. 1144-1154.
2. Kalantar, M. and S.M. Mousavi G, Dynamic behavior of a stand-alone hybrid power generation system of
wind turbine, microturbine, solar array and battery storage. Applied Energy, 2010. 87(10): p. 3051-3064.
3. Hasan, N.S., et al., Review of storage schemes for wind energy systems. Renewable and Sustainable Energy
Reviews, 2013. 21: p. 237-247.
4. Toledo, O.M., D. Oliveira Filho, and A.S.A.C. Diniz, Distributed photovoltaic generation and energy
storage systems: A review. Renewable and Sustainable Energy Reviews, 2010. 14(1): p. 506-511.
5. Díaz-González, F., et al., A review of energy storage technologies for wind power applications. Renewable
and Sustainable Energy Reviews, 2012. 16(4): p. 2154-2171.
6. O'Kane, S.E.J., et al., Lithium-ion battery degradation: how to model it. Physical Chemistry Chemical
Physics, 2022. 24(13): p. 7909-7922.
7. Bashash, S., et al., Plug-in hybrid electric vehicle charge pattern optimization for energy cost and battery
longevity. Journal of Power Sources, 2011. 196(1): p. 541-549.
8. Dallinger, D. and M. Wietschel, Grid integration of intermittent renewable energy sources using price-
responsive plug-in electric vehicles. Renewable and Sustainable Energy Reviews, 2012. 16(5): p. 3370-
3382.
9. Tie, S.F. and C.W. Tan, A review of energy sources and energy management system in electric vehicles.
Renewable and Sustainable Energy Reviews, 2013. 20: p. 82-102.
10. Richardson, D.B., Electric vehicles and the electric grid: A review of modeling approaches, Impacts, and
renewable energy integration. Renewable and Sustainable Energy Reviews, 2013. 19: p. 247-254.
11. Hosen, M.S., et al., Battery lifetime prediction and performance assessment of different modeling approaches.
iScience, 2021. 24(2): p. 102060.
12. Ramadesigan, V., et al., Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering
Perspective. Journal of The Electrochemical Society, 2012. 159(3): p. R31-R45.
13. Lu, L., et al., A review on the key issues for lithium-ion battery management in electric vehicles. Journal of
Power Sources, 2013. 226: p. 272-288.
14. Scrosati, B. and J. Garche, Lithium batteries: Status, prospects and future. Journal of Power Sources, 2010.
195(9): p. 2419-2430.
15. Ng, M.-F., et al., Predicting the state of charge and health of batteries using data-driven machine learning.
Nature Machine Intelligence, 2020. 2(3): p. 161-170.
16. Moura, S.J., N.A. Chaturvedi, and M. Krstić, Adaptive Partial Differential Equation Observer for Battery
State-of-Charge/State-of-Health Estimation Via an Electrochemical Model. Journal of Dynamic Systems,
Measurement, and Control, 2013. 136(1).
17. He, H., et al., Comparison study on the battery models used for the energy management of batteries in electric
vehicles. Energy Conversion and Management, 2012. 64: p. 113-121.
18. Tamilselvi, S., et al., A Review on Battery Modelling Techniques. Sustainability, 2021. 13(18): p. 10042.
19. Li, Y., et al., Data-driven health estimation and lifetime prediction of lithium-ion batteries: A review.
Renewable and Sustainable Energy Reviews, 2019. 113: p. 109254.
20. Zhang, Q.Z., X.Y. Wang, and H.M. Yuan. Estimation for SOC of Li-ion battery based on two-order RC
temperature model. in 2018 13th IEEE Conference on Industrial Electronics and Applications (ICIEA). 2018.
21. Hussein, A.A. and I. Batarseh. An overview of generic battery models. in 2011 IEEE Power and Energy
Society General Meeting. 2011.
22. Grandjean, T.R.B., A. McGordon, and P.A. Jennings, Structural Identifiability of Equivalent Circuit
Models for Li-Ion Batteries. Energies, 2017. 10(1): p. 90.
23. Li, S. and B. Ke. Study of battery modeling using mathematical and circuit oriented approaches. in 2011 IEEE
Power and Energy Society General Meeting. 2011.
24. Thirugnanam, K., et al., Mathematical Modeling of Li-Ion Battery Using Genetic Algorithm Approach for
V2G Applications. IEEE Transactions on Energy Conversion, 2014. 29(2): p. 332-343.
25. A. A. Kebede, T. Kalogiannis, J. Van Mierlo, and M. Berecibar, “A comprehensive review of stationary
energy storage devices for large scale renewable energy sources grid integration,” Renew. Sustain. Energy
Rev., 159, p. 112213, 2022, doi: 10.1016/j.rser.2022.112213.
26. W. Cole and A. W. Frazier, “DOE - Cost projections for utility- scale battery storage,” NREL Tech. Rep.,
no. June, p. 17, 2019.

27. C. Pillot, “The Rechargeable Battery Market and Main Trends 2016-2025,” in International Battery Seminar
&Exhibit, 2017, 145, pp. P197–P197, doi: 10.1177/0194599811415823a205.

28. M. R. M. Cruz, D. Z. Fitiwi, S. F. Santos, and J. P. S. Catalão, “A comprehensive survey of flexibility

options for supporting the low-carbon energy future,” Renew. Sustain. Energy Rev., 97, no. July, pp. 338–
353, 2018, doi: 10.1016/j.rser.2018.08.028.

29. S. R. Salkuti, “Energy storage technologies for smart grid: A comprehensive review,” Majlesi J. Electr. Eng.,
14, no. 1, pp. 39–48, 2020.

30. D. Bernardi, E. Pawlikowski, and J. Newman, “A General Energy Balance for Battery Systems_Bernadi D,
Powlikowski E and Newman,” J. Electrochem. Soc., 132, no. 1, pp. 5–12, 1985.

31. T. R. Crompton, “Battery reference book — Second Edition,” Fuel Energy Abstr., 37, no. 3, p. 192, 1996,
doi: 10.1016/0140-6701(96)88678-4.

32. J. Warner, The handbook of lithium-ion battery pack design: Chemistry, components, types and terminology.
2015.

33. J. Larminie and J. Lowry, Electric Vehicle Technology Explained: Second Edition. 2012.

34. V. Muenzel et al., “A Comparative Testing Study of Commercial 18650-Format Lithium-Ion Battery Cells,” J.
Electrochem. Soc., 162, no. 8, pp. A1592–A1600, 2015, doi: 10.1149/2.0721508jes.

35. K. E. Mehrdad Ehsani, Yimin Gao, Stefano Longo, Modern Electric, Hybrid Electric, and Fuel Cell
Vehicles, Third Edit., 1, no. 1. Boca Raton FL: Taylor & Francis Group, 2018.

36. A. A. H. Hussein and I. Batarseh, “An overview of generic battery models,” IEEE Power Energy Soc. Gen.
Meet., no. July 2011, 2011, doi: 10.1109/PES.2011.6039674.

37. M. Shen and Q. Gao, “A review on battery management system from the modeling efforts to its
multiapplication and integration,” Int. J. Energy Res., 43, no. 10, pp. 5042–5075, 2019, doi:
10.1002/er.4433.

38. O. Tremblay and L. A. Dessaint, “Experimental validation of a battery dynamic model for EV applications,”
24th Int. Batter. Hybrid Fuel Cell Electr. Veh. Symp. Exhib. 2009, EVS 24, 2, pp. 930–939, 2009.

39. O. Tremblay, L. A. Dessaint, and A. I. Dekkiche, “A generic battery model for the dynamic simulation of
hybrid electric vehicles,” VPPC 2007 - Proc. 2007 IEEE Veh. Power Propuls. Conf., no. V, pp. 284–289,
2007, doi: 10.1109/VPPC.2007.4544139.

40. A. Kopczyński, Z. Liu, and P. Krawczyk, “Parametric analysis of Li-ion battery based on laboratory tests,”
E3S Web Conf., 44, pp. 1–8, 2018, doi: 10.1051/e3sconf/20184400074.

41. K. J. Siczek, “Modeling of Batteries,” Next-Generation Batter. with Sulfur Cathodes, pp. 201–218, 2019,
doi: 10.1016/b978-0-12-816392-4.00016-5.

42. Q. Zhang, N. Cui, Y. Shang, B. Duan, and C. Zhang, “An improved Peukert battery model of nonlinear
capacity considering temperature effect,” IFAC-PapersOnLine, 51, no. 31, pp. 665–669, 2018, doi:
10.1016/j.ifacol.2018.10.154.
43. S. Han, R. Kobla Tagayi, J. Kim, and J. Kim, “Adaptive deterministic approach for optimized sizing of high-
energy battery system applied in electric-powered application,” Appl. Energy, 309, no. September 2021, p.
118498, 2022, doi: 10.1016/j.apenergy.2021.118498.

44. S. Kolluri, S. V. Aduru, M. Pathak, R. D. Braatz, and V. R. Subramanian, “Real-time Nonlinear Model
Predictive Control (NMPC) Strategies using Physics-Based Models for Advanced Lithium-ion Battery
Management System (BMS),” J. Electrochem. Soc., 167, no. 6, p. 063505, 2020, doi:
10.1149/1945-7111/ab7bd7.
45. Massing, “Hamilton Kerr Bull 1 Orazio Gentileschi.pdf,” Analog devices, 2017, [Online]. Available:
http://www.analog.com/media/en/technical-documentation/technical-articles/A-Closer-Look-at-State-
Of-Charge-and-State-Health-Estimation-Techniques-....pdf.
46. T. Kim, Y. Wang, Z. Sahinoglu, T. Wada, S. Hara, and W. Qiao, “State of charge estimation based on a
realtime battery model and iterative smooth variable structure filter,” 2014 IEEE Innov. Smart Grid
Technol. - Asia, ISGT ASIA 2014, pp. 132–137, 2014, doi: 10.1109/ISGT-Asia.2014.6873777.
47. K. E. Thomas and J. Newman, “Heats of mixing and of entropy in porous insertion electrodes,” J. Power
Sources, 119–121, pp. 844–849, 2003, doi: 10.1016/S0378-7753(03)00283-0.
48. P. M. Muñoz, R. M. Humana, T. Falagüerra, and G. Correa, “Parameter optimization of an electrochemical
and thermal model for a lithium-ion commercial battery,” J. Energy Storage, 32, no. June, p. 101803, 2020,
doi: 10.1016/j.est.2020.101803.
49. C. R. Pals and J. Newman, “Thermal Modeling of the Lithium / Polymer Battery,” 142, no. 10, pp. 3282–
3288, 1995.
50. S. Du et al., “Study on the thermal behaviors of power lithium iron phosphate (LFP) aluminum-laminated
battery with different tab configurations,” Int. J. Therm. Sci.,89, pp. 327–336, 2015, doi:
10.1016/j.ijthermalsci.2014.11.018.
51. Y. Xiao, “Model-Based Virtual Thermal Sensors for Lithium-Ion Battery in EV Applications,” IEEE Trans.
Ind. Electron., 62, no. 5, pp. 3112–3122, 2015, doi: 10.1109/TIE.2014.2386793.
52. X. Tang, Y. Wang, C. Zou, K. Yao, Y. Xia, and F. Gao, “A novel framework for Lithium-ion battery
modeling considering uncertainties of temperature and aging,” Energy Convers. Manag., 180, no.
September 2018, pp. 162–170, 2019, doi: 10.1016/j.enconman.2018.10.082.
53. [C. Forgez, D. Vinh Do, G. Friedrich, M. Morcrette, and C. Delacourt, “Thermal modeling of a cylindrical
LiFePO4/graphite lithium-ion battery,” J. Power Sources, 195, no. 9, pp. 2961–2968, 2010, doi:
10.1016/j.jpowsour.2009.10.105.
54. K. J. Lee, K. Smith, A. Pesaran, and G. H. Kim, “Three dimensional thermal-, electrical-, and
electrochemical-coupled model for cylindrical wound large format lithium-ion batteries,” J. Power Sources,
241, pp. 20–32, 2013, doi: 10.1016/j.jpowsour.2013.03.007.
55. N. Tian, Y. Wang, J. Chen, and H. Fang, “One-shot parameter identification of the Thevenin’s model for
batteries: Methods and validation,” J. Energy Storage, 29, no. January, p. 101282, 2020, doi:
10.1016/j.est.2020.101282.
56. S. Wang, K. Kuang, X. Han, Z. Chu, L. Lu, and M. Ouyang, “A model-based continuous differentiable
current charging approach for electric vehicles in direct current microgrids,” J. Power Sources, 482, no.
October 2020, p. 229019, 2021, doi: 10.1016/j.jpowsour.2020.229019.
57. U. S. Kim, J. Yi, C. B. Shin, T. Han, and S. Park, “Modelling the thermal behaviour of a lithium-ion battery
during charge,” J. Power Sources, 196, no. 11, pp. 5115–5121, 2011, doi: 10.1016/j.jpowsour.2011.01.103.
58. X. Zhang, W. Zhang, and G. Lei, “A review of li-ion battery equivalent circuit models,” Trans. Electr.
Electron. Mater., 17, no. 6, pp. 311–316, 2016, doi: 10.4313/TEEM.2016.17.6.311.
59. B. Khaki and P. Das, “An equivalent circuit model for Vanadium Redox Batteries via hybrid extended Kalman
filter and Particle filter methods,” J. Energy Storage, 39, no. February, p. 102587, 2021, doi:
10.1016/j.est.2021.102587.
60. R. Xiao, Y. Hu, X. Jia, and G. Chen, “A novel estimation of state of charge for the lithium-ion battery in
electric vehicle without open circuit voltage experiment,” Energy, 243, p. 123072, 2022, doi:
10.1016/j.energy.2021.123072.
61. L. He, Y. Wang, Y. Wei, M. Wang, X. Hu, and Q. Shi, “An adaptive central difference Kalman filter
approach for state of charge estimation by fractional order model of lithium-ion battery,” Energy, 244, p.
122627, 2022, doi: 10.1016/j.energy.2021.122627.
62. X. Ding, D. Zhang, J. Cheng, B. Wang, and P. C. K. Luk, “An improved Thevenin model of lithium-ion
battery with high accuracy for electric vehicles,” Appl. Energy, 254, no. February, p. 113615, 2019, doi:
10.1016/j.apenergy.2019.113615.
63. S. Wang, D. I. Stroe, C. Fernandez, C. Yu, C. Zou, and X. Li, “A novel energy management strategy for the
ternary lithium batteries based on the dynamic equivalent circuit modeling and differential Kalman filtering
under time-varying conditions,” J. Power Sources, 450, no. October 2019, p. 227652, 2020, doi:
10.1016/j.jpowsour.2019.227652.
64. S. A. Montgomery and N. J. Mourtos, “Design of a 5 kilogram solar-powered unmanned airplane for
perpetual solar endurance flight,” 49th AIAA/ASME/SAE/ASEE Jt. Propuls. Conf., 1 PartF, pp. 1–27,
2013, doi: 10.2514/6.2013-3875.
65. “NCR18650B,” no. 469, p. 18650.
66. L. Vichard, A. Ravey, P. Venet, F. Harel, S. Pelissier, and D. Hissel, “A method to estimate battery SOH
indicators based on vehicle operating data only,” Energy, 225, p. 120235, 2021, doi:
10.1016/j.energy.2021.120235.
67. C. Hanisch et al., “In-Production Recycling of Active Materials from Lithium-Ion Battery Scraps,” ECS
Trans., 64, no. 22, pp. 131–145, 2015, doi: 10.1149/06422.0131ecst.
44.