Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    THVdatasheet

    Uploaded by

    manisha.pp22558

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    THVdatasheet

    Uploaded by

    manisha.pp22558
    11 views2 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views2 pages

    THVdatasheet

    Uploaded by

    manisha.pp22558

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    INSTALLATION

    THV
    Three-way bi-amp trapezoid Hybrid® fully horn loaded

    Features
    • All-horn three-way system
    • ‘Phase-ball’ loaded mid-driver
    • Hybrid® LF section
    • Fitted with handles and castors
    • Vertical format
    • Five year limited warranty

    Applications
    • Larger club performance
    • Large scale installs

    THV is a very high performance, all-horn, three-way system in a single wide-bandwidth package.

    The driver complement has been engineered for exemplary performance in all bands.

    The Hybrid® low frequency section comprises a horn-loaded 15” (380mm)/4” (100mm) voice coil driver that is reflex loaded to
    extend the LF output to below the natural horn cut-off point. The LF driver features a water resistant cone and triple roll surround
    for increased excursion.

    The mid-horn of the THV has a unique ‘phase-ball’ loading device which maintains the constant directivity characteristics of the
    horn at the upper end of its range. It is driven by a 10” (250mm) midrange driver with an aluminium demodulating ring for im-
    proved high-mid clarity and reduced distortion when driven hard. The 70˚ x 40˚ HF section of the THV features a neodymium 1”
    (25mm) exit compression driver with a Kapton diaphragm for high sensitivity and extended HF performance.

    The internal mid/ high passive crossover allows this three-way system to be driven in a bi-amp configuration.

    The THV is configured in a vertically formatted, trapezoidal birch ply cabinet and fitted with twelve M10 inserts to facilitate ease of
    mounting. The enclosure has generous pocket handles on the sides and rear castors are fitted as standard.

    A Martin Audio iK42 or VIA5002/5004 are the recommend amplifier partners with the DX range of controllers also compatible

    Martin Audio Ltd Telephone: +44 (0) 1494 535 312


    Century Point, Halifax Road, High Wycombe Facsimile: +44 (0) 1494 438 669
    Buckinghamshire HP12 3SL, England Email: [email protected]

    All information is Copyright © 2018 Martin Audio Ltd. www.martin-audio.com


    INSTALLATION

    THV
    Three-way bi-amp trapezoid Hybrid® fully horn loaded

    Technical Specifications Architectural Specifications


    TYPE Three-way bi-amp trapezoid Hybrid® fully horn loaded The loudspeaker system shall be of the trapezoidal three-way
    FREQUENCY RESPONSE (5) 50Hz-18kHz ± 3dB bi-amp Hybrid® fully horn loaded type, consisting of one 15”
    DRIVERS 15” (380mm)/4” (100mm) coil bass driver (380mm)/4” (100mm) voice coil horn and reflex loaded low
    10” (250mm)/2.5” (63.5mm) coil mid driver frequency transducer, one 10” (250mm)/2.5” (63.5mm) voice coil
    1” (25mm) exit HF compression driver horn loaded mid frequency transducer with a “phase-ball” loading
    RATED POWER (2) LF: 750W AES, 3000W peak device and one 1” (25mm) exit HF compression driver mounted
    MF + HF: 300W AES, 1200W peak on a constant directivity horn. The enclosure shall be of a multi-
    RECOMMENDED AMPLIFIER iK42 / VIA5002/5004 laminate birch ply construction with threaded inserts for wall and
    SENSITIVITY (6) LF: 104dB, MF + HF: 104dB ceiling mounting and fitted with 4 pocket handles and 4” (100mm)
    MAXIMUM SPL (9) 133dB continuous, 139dB peak castors for easy deployment. The loudspeaker shall be operated
    NOMINAL IMPEDANCE LF: 8 ohms, MF + HF: 8 ohms with a separate electronic controller or amplifier providing a 200Hz
    DISPERSION (-6dB) 70˚ horizontal, 40˚ vertical crossover between low and mid/high frequency sections. The mid
    CROSSOVER 200Hz active, 2kHz passive
    and high frequency sections shall be integrated by an internal 2kHz
    ENCLOSURE 250 litre, multi-laminate birch ply
    passive crossover network. Performance of the loudspeaker system
    FINISH Textured black paint
    PROTECTIVE GRILLE Black perforated steel with its electronic controller or amplifier shall meet or exceed the
    CONNECTORS 2 x Neutrik NL4 following criteria: Frequency response measured 1 metre on axis
    PIN CONNECTIONS LF+,- : 1+,1-, (MF + HF) +,- : 2+,2- shall be 50Hz-18kHz ±3dB. High frequency dispersion at -6dB
    FITTINGS 12 x M10 inserts points shall be 70°H x 40°V. Power handling shall be 750W
    4 x 4” (100mm) castors, 4 x pocket handles AES, 3000W peak LF, 300W AES, 1200W peak MF + HF. Rated
    DIMENSIONS (inc wheels) (W) 558mm x (H) 1067mm x (D) 780mm (908mm) impedance shall be 8 ohms LF, 8 ohms MF + HF. Maximum SPL
    (W) 22ins x (H) 42ins x (D) 30.7ins (35.7ins) calculated at 1 metre on axis shall be 133dB continuous, 139dB
    WEIGHT 77.5kg (170.5lbs) peak. Dimensions (W) 558mm x (H) 1067mm x (D) 780mm (22ins
    x 42ins x 30.7ins). Weight 77.5kg (170.5lbs). The loudspeaker
    system shall be the Martin Audio THV

    Notes
    (1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
    (2) AES Standard ANSI S4.26-1984.
    (3) Measured in half space at 2 metres with 1 watt input, using band limited
    pink noise, then referred to 1 metre.
    (4) Measured in half space at 2 metres using band limited pink noise, then
    referred to 1 metre.
    (5) Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.
    (6) Measured in open (4π) space at 2 metres with 1 watt input, using band
    limited pink noise, then referred to 1 metre.
    THV
    (7) Measured in open (4π) space at 2 metres using band limited pink noise,
    then referred to 1 metre.
    (8) Measured in open (4π) space at 2 metres with 2.83V input, using band
    limited pink noise, then referred to 1 metre.
    (9) Calculated at 1 metre.

    Martin Audio Ltd Telephone: +44 (0) 1494 535 312


    Century Point, Halifax Road, High Wycombe Facsimile: +44 (0) 1494 438 669
    Buckinghamshire HP12 3SL, England Email: [email protected]

    All information is Copyright © 2018 Martin Audio Ltd. www.martin-audio.com

    You might also like