; This file is Insyde H2OFFT (Flash Firmware Tool) configuration file.

; Because some setting items only supported on specific OS flash.

; Here use following method to identify each setting item.
; (dwsDWS) means the setting item supported on which OS flash.
; d means DOS normal flash.
; w means Windows normal flash.
; s means Shell normal flash.
; D means DOS secure flash.
; W means Windows secure flash.
; S means Shell secure flash.

;
; ***************************
;
; Supported Section List.
;
; ***************************
; | supports on
; -------------------------------------+---------------------------------
; [AC_Adapter] | DOS WIN SHELL Secure
; [AutoWakeup] | WIN Secure
; [Bios_Version_Check] | DOS WIN SHELL
; [BIOSVersionFormat] | DOS WIN SHELL
; [CapsuleAudit] | DOS WIN
; [CommonFlash] | DOS WIN SHELL
; [FactoryCopy] | Secure
; [FDFile] | WIN
; [FlashComplete] | DOS WIN SHELL Secure
; [FlashSecureBIOSOverride] | WIN SHELL
; [ForceFlash] | WIN SHELL Secure
; [Log_file] | WIN SHELL
; [MessageStringTable] | DOS WIN SHELL
; [MULTI_FD] | DOS WIN SHELL
; [Option] | WIN
; [Others] | DOS WIN SHELL Secure
; [PasswordCheck] | WIN
; [PermitFlashConditionalData] | DOS
; [PermitFlashVersion] | WIN
; [Platform_Check] | DOS WIN SHELL
; [PlatformVersion] | DOS WIN SHELL
; [Region] | DOS WIN SHELL Secure
; [ReturnCodeDefinition] | WIN
; [ReturnErrorCode] | WIN
; [SecureUpdate] | WIN SHELL
; [UI] | WIN DOS SHELL
; [UpdateEC] | WIN SHELL Secure
; [UpdateExtraData] | WIN
; [UpdateOEMME] | WIN SHELL
; [Version] | WIN
;

; Supports on DOS WIN SHELL Secure flash.

[CommonFlash]
SwitchString=ACEN CPVER:[1] PJMDEN FHRST RESSEN
ErrorMsg00=No error!
ErrorMsg01=AC detect error!
ErrorMsg02=DC detect error!
ErrorMsg03=DC gas gauge under xx%!
ErrorMsg04=BIOS version compare error!
ErrorMsg05=Model name compare error!
ErrorMsg10=Not support this version of Flash Common Interface!
ErrorMsg11=Show BIOS version string length more than xx bytes.
ErrorMsg12=Show model name string length more than xx bytes.
;
; WARNING!
; to disable [CommonFlash] is remove entire section.
; if enable, power check will take care by Ihisi, and NOT reference [AC_Adapter].
;
;SwitchString (dwsDWS)
; default : empty.
; String : A switch flag setting string. Ex: "CPVER:[1] ACEN DCEN
FHRST"
; Detail parameter please reference following table.
; Parameter | Description
; -------------+----------------------------------------------
; PTEN | All protection enable.
; PTDIS | All protection disable.
; ACEN | AC protect checking enable.
; ACDIS | AC protect checking disable.
; DCEN | DC & Gangue protect checking enable.
; DCDIS | DC & Gangue protect checking disable.
; RESSEN | BIOS Regression enable.
; RESSDIS | BIOS Regression disable.
; PJMDEN | Project Model string protect checking enable.
; PJMDDIS | Project Model string protect checking disable.
; FHOS | System back to OS after flash BIOS completely.
; FHST | System directly shutdown after flash BIOS completely.
; FHRST | System directly reboot after flash BIOS completely.
; CPVER:[Num] | Common Flash Version information
; | ex: [Num] is decimal and start from 1.
; -------------+----------------------------------------------
;ErrorMsg00 (dwsDWS)
; default : empty.
; String : No error message.
;ErrorMsg01 (dwsDWS)
; default : empty.
; String : AC error message.
;ErrorMsg02 (dwsDWS)
; default : empty.
; String : DC error message.
;ErrorMsg03 (dwsDWS)
; default : empty.
; String : DC gas gauge under xx% message.
;ErrorMsg04 (dwsDWS)
; default : empty.
; String : BIOS version error message.
;ErrorMsg05 (dwsDWS)
; default : empty.
; String : Model name error message.
;ErrorMsg10 (dwsDWS)
; default : empty.
; String : No support this version of Flash Common Interface
message.
;The number of ErrorMsg## is in hex.

; Supports on DOS flash.

[PermitFlashConditionalData]
PFCDFunctionEnable=0
Conditionalcount=3
Conditionaldata1=1,w,"0x0003","The BIOS image does not support the current hardware
configuration.\nFlash update is aborted."
Conditionaldata2=2,w,"0x20DD","The BIOS image does not support the current hardware
configuration.\nFlash update is aborted."
Conditionaldata3=2,w,"0x20DE","The BIOS image does not support the current hardware
configuration.\nFlash update is aborted."
;This flag is the switch of comparing BIOS project ID with ROM file project ID.
;PFCDFunctionEnable (d)
; default : 0.
; 0 : function is disabled.
; 1 : function is enabled.
; The function is enabled or disabled by the flag. If the flag is disabled,
application will keep flash progress without conditional check.
;Conditionalcount (d)
; default : 0.
; Integer : Total count of conditional data.
;Conditionaldata#=[Data Type], [Data Format], [Data Field], [Message String]
; Base on data format you need and to add configure value by below data format
field and data field.
;(d) Conditionaldata# : # support from 1~20.
;(d) [Data Type] : The type of Conditionaldata, when you have more than
one conditional data need to check before flash, you can give them different type.
; It will allow flash when all types are pass.
; It also can use the same type with more than one
conditional data, that means if one of the conditional data is pass, this type is
pass.
; Ex: We have the following settings, Conditionaldata1
is type 0, others are type 1.
; Conditionalcount=3
; Conditionaldata1=0,w,"0x1234","This BIOS is not
allow to flash."
; Conditionaldata2=1,w,"0x1111","This BIOS is not
allow to flash."
; Conditionaldata3=1,w,"0x1222","This BIOS is not
allow to flash."
; When Conditionaldata1 is pass and Conditionaldata2
or Conditionaldata 3 is pass that will allow flash.
; Allow = data1 pass && ( data2 pass || data3
pass ).
;
;(d) [Data Format] : Can support different as binary, string, WORD, DWORD.
; b : The data format is binary.
; s : The data format is string.
; w : The data format is WORD.
; d : The data format is DWORD.
;(d) [Data Field] : Relative data base on data format.
; BINARY : If the data format is binary.
; Data field is HEX. The data is as like "AA BB 00 12
55".
; String : If the data format is string.
; Data field is string. The data is as like
"Data.123.AABE.".
; WORD : If the data format is WORD.
; Data field is HEX and unit is a WORD length. The data
is as like "0x1223".
; DWORD : If the data format is DWORD.
; Data field is HEX and unit is a DWORD length. The data
is as like "0x12345678".
;(d) [Message string] : Define customize message string here.
; The message is pop up when flash utility get a process
interrupted from BIOS.
; The message string is optional field.
; It will not pop any message if you do not provide
message string in this field.

; Supports on DOS WIN SHELL flash.

[MULTI_FD]
Flag=1
FD#01=MEMORY,ff67003b,000000FF,00000001,DH53F_1A.fd
FD#02=MEMORY,ff67003b,000000FF,000000FF,DH53F_10.fd
;Flag (dwsDWS)
; default : 0.
; 0 : Normal mode.
; 1 : Multi-FD mode. It will reference FD#XX values.
;FD#XX (dwsDWS)
; Integer : XX is decimal number from 01 to 99. (FD#01 ~ FD#99)
;This section supports IO space type, PCI address type and multiple condition type.
;FD#XX=IO,[Offset],[Mask],[Value],[Filename],[ME Filename],[INI Filename]
;FD#XX=PCI,[Bus],[Device],[Function],[Offset],[Mask],[Value],[Filename],[ME
Filename],[INI Filename]
;FD#XX=MPCIIO,[Condition Number],PCI-[Bus]-[Device]-[Function]-[Offset]-[Mask]-
[Value],IO-[Offset]-[Mask]-[Value],[Filename],[ME Filename],[INI Filename]
;FD#XX=ID,[Model Name],[Filename],[ME Filename],[INI Filename]
;FD#XX=OS,[OS Version],[Filename],[ME Filename],[INI Filename]
;FD#XX=MEMORY,[Physical Address],[Mask],[Value],[Filename],[ME Filename],[INI
Filename]
;(dwsDWS) [Offset] : Offset in hex.
;(dwsDWS) [Mask] : IO and MEMORY type supports BYTE, WORD and DWORD in
hex.
; For example, BYTE -> 03, WORD -> 0A01, DWORD
100400D3
; PCI type supports DWORD in hex only.
;(dwsDWS) [Value] : IO and MEMORY type supports BYTE, WORD and DWORD in
hex.
; PCI type supports DWORD in hex only.
;(dwsDWS) [Model Name] : The platform ID, model name string.
;(wW) [OS Version] : 32bit or 64bit OS. 32 for 32bit OS, 64 for 64bit OS.
;(dws) [Physical Address] : A DWORD value in hex.
;(dwsDWS) [Filename] : Filename of FD.
;(w) [ME Filename] : ME Filename of FD. If it exists, utility will run
OEMME flash feature.
;(dw) [INI Filename] : INI Filename for overwrite.
; If it exists, utility will load the new ini file and
overwrite all sections (except [MULTI_FD]) exist in new ini file.
;When [Offset] & [Mask] == [Value], it will flash the following files ([Filename]
and [ME Filename]).

; Supports on WIN flash.

[Version]
Version=
;H2OFFT (FlashFirmware Tool) will display the value at top
;Version (wW)
; default : empty.
; String : Version number string for display.
; It will be show on UI, and append on current version
number.
; When current version is 5.01 and this version string
set to "12",
; then it will show "H2OFFT V5.01.12" on main dialog
caption.

; Supports on WIN DOS SHELL flash.

[UI]
Confirm=1
Silent=0
SilentWithDialog=2
DisplayID=1
InsydeInfo=1
VersionInfo=1
GroupInfo=1
ConfirmInfo=0
ConfirmInfoRDate=0
OnFlashingBeep=0
OnFlashingBeepDelayTime=800
DisableMouseAndKeyboardInput=1
BeforeRunToolDelayTime=0
ProgramStartToWrongMessageBox=0
GetFDFileButton=0
DelayBeforeFlash=0
ConfirmDialogCustomizeMessage=
ShowCustomizeMessageOnConfirmDialogOnly=0
ShowUpdateROMAddress=0
Elapse=1
DisableAccessRightWarningMessage=1
PassUpdateProgressToBios=0
DisableAccessRightCheck=1
;Confirm (wW)
; default : 1.
; 0 : Don't display confirm dialog.
; 1 : Display confirm dialog.
;Silent (wW)
; default : 0.
; 0 : Normal mode.
; 1 : Silent mode, hide main dialog.
;SilentWithDialog (wW)
; default : 2.
; 0 : Don't display any dialog.
; 1 : Display main dialog only.
; 2 : Display all dialogs except main dialog.
;DisplayID (wW)
; default : 1.
; 0 : Don't display BIOS ID.
; 1 : Display BIOS ID.
;InsydeInfo (wW)
; default : 1.
; 0 : Don't display Insyde copyright information and URL.
; 1 : Display Insyde copyright information and URL.
;VersionInfo (wW)
; default : 1.
; 0 : Don't display BIOS version.
; 1 : Display BIOS version.
;GroupInfo (wW)
; default : 1.
; 0 : Don't display group box.
; 1 : Display group box.
;ConfirmInfo (wW)
; default : 0.
; 0 : Don't display BIOS version and build date information
in confirm dialog.
; 1 : Display BIOS version and build date information in
confirm dialog.
;ConfirmInfoRDate (wW)
; default : 0.
; 0 : Don't display BIOS version and release date
information in confirm dialog.
; 1 : Display BIOS version and release date information in
confirm dialog.
; When this flag set to 1, the ConfirmInfo flag won't be
referenced.
;OnFlashingBeep (w)
; default : 0.
; 0 : Don't beep on flashing.
; 1 : Beep on flashing.
;OnFlashingBeepDelayTime (w)
; default : 800. (Unit is millisecond)
; Integer : Set beep delay time (milliseconds).
;DisableMouseAndKeyboardInput (wW)
; default : 0.
; 0 : Don't hook mouse and keyboard.
; 1 : Hook mouse and keyboard without "CTRL+ALT+DEL".
;BeforeRunToolDelayTime (wW)
; default : 0. (Unit is second)
; Integer : Delay number of seconds before flash process.
;ProgramStartToWrongMessageBox (wW)
; default : 0.
; 0 : Don't pop-up warning dialog before flash process.
; 1 : Pop-up a warning dialog before flash process.
;GetFDFileButton (wW)
; default : 0.
; 0 : Hide FD file browse button.
; 1 : Show the button for browsing FD file.
;DelayBeforeFlash (wW)
; default : 0. (Unit is second)
; Integer : Delay number of seconds before flashing.
;ConfirmDialogCustomizeMessage (wW)
; default : empty.
; String : A key name which list in [MessageStringTable].
; For inserting additional notification message in
confirm dialog.
;ShowCustomizeMessageOnConfirmDialogOnly (wW)
; default : 0
; 0 : Display default confirm message and insert the
customize message on confirm dialog.
; 1 : Do not display default confirm message, only show
customize message on confirm dialog.
;ShowUpdateROMAddress (d)
; default : 0
; 0 : Show progress bar when updating BIOS.
; 1 : Show ROM address when updating BIOS.
;Elapse (dwsDWS)
; default : 0
; 0 : Disable to show elapse time during progressing BIOS
update.
; 1 : Enable to show elapse time during progressing BIOS
update.
;DisableAccessRightWarningMessage (wW)
; default : 0
; 0 : It will show warning message when any region is locked
(such as ME) in input image.
; 1 : Do not show warning message when any region is locked
in input image.
;DisableAccessRightCheck (wW)
; default : 0
; 0 : It will check access right when any one region flag of
[Region] section is set.
; 1 : It will not do access right check.
;PassUpdateProgressToBios (DWS)
; default : 0
; 0 : Do not pass update progress to BIOS.
; 1 : Will pass update progress to BIOS during flash.

; Supports on WIN flash.

[Option]
Flag=0
;Flag (wW)
; default : 0.
; 0 : Auto flash mode.
; 1 : User option mode, including option, start, exit
buttons.
; (Option button will disable on secure flash mode.)
; 2 : User flash mode, including start, exit buttons.

; Supports on WIN flash.

[FDFile]
FileName=isflash.bin
;FileName (wW)
; default : empty.
; String : Utility always load this file.
; If the FileName is empty, utility will search current
directory
; and load the first found FD file.

; Supports on DOS WIN SHELL flash.

[AC_Adapter]
Flag=1
BatteryCheck=1
BatteryBound=25
LauncherAcWarning=messagestringA02
SecurityAcWarning=messagestringA02
AcNotConnectError=messagestringA05
DcNotConnectError=messagestringA06
DcNotEnoughError=messagestringA07
;Flag (dwsDWS)
; default : 1.
; 0 : Don't check AC.
; 1 : Check AC.
;BatteryCheck (dwsDWS)
; default : 0.
; 0 : Don't check battery.
; 1 : Check battery.
;BatteryBound (dwsDWS)
; default : 20.
; Integer (1~100) : Low battery boundary (percentage).
; When BatteryCheck=1 this value will be referenced.
; And only when the battery life percentage is bigger
than
; inputed value, it can do flash.
;LauncherAcWarning (dsDS)
; default : messagestringA02
; String : A key name which list in [MessageStringTable].
;SecurityAcWarning (dwsDWS)
; default : messagestringA02
; String : A key name which list in [MessageStringTable].
;AcNotConnectError (wW)
; default : messagestringA05
; String : A key name which list in [MessageStringTable].
;DcNotConnectError (wW)
; default : messagestringA06
; String : A key name which list in [MessageStringTable].
;DcNotEnoughError (wW)
; default : messagestringA07
; String : A key name which list in [MessageStringTable].

; Supports on DOS WIN SHELL flash.

[Platform_Check]
Flag=3
PlatformName1=AA
PlatformName2=BB
PlatformName3=
PlatformName4=
PlatformName5=
PlatformName6=
PlatformName7=
PlatformName8=
PlatformName9=
PlatformName10=
PlatformName11=
PlatformName12=
PlatformName13=
PlatformName14=
PlatformName15=
PlatformName16=
PlatformName17=
PlatformName18=
PlatformName19=
PlatformName20=
;This flag is the switch of comparing BIOS project ID with ROM file project ID.
;Flag (dwsDWS)
; default : 3.
; 0 : Don't check project ID.
; 1 : Check project ID of new file.
; If ID is different with current BIOS, the utility will
close.
; 2 : Utility will compare current platform ID with the 20
platform IDs.
; If any one is match, it will go ahead, otherwise
utility will close.
; 3 : Depends on BIOS report.
;PlatformName1~20 (dwsDWS)
; default : empty.
; String : If ROM file do not contain correct ID, user can define
ID here.
; Supports on DOS WIN SHELL flash.
[PlatformVersion]
Flag=0
Version1=
Version2=
Version3=
Version4=
Version5=
Version6=
Version7=
Version8=
Version9=
Version10=
Version11=
Version12=
Version13=
Version14=
Version15=
Version16=
Version17=
Version18=
Version19=
Version20=
;This flag only available when the [Platform_Check] is enable to compare the 20
platform IDs.
;The Version is pair with the PlatformName.
;For example: When the platform ID matches with PlatformName2, the Version2 will be
used.
;Flag (dwsDWS)
; default : 0.
; 0 : Don't use multi version.
; 1 : Use the version in the list instead of the version in
file.
;Version1~20 (dwsDWS)
; default : empty.
; String : If ROM file do not contain correct version, user can
define version here.

; Supports on DOS WIN SHELL flash.

[Bios_Version_Check]
Flag=2
CheckByBios=0
CheckByBiosErrorMessage="This BIOS file is not allow to flash. The flash process
will be terminated."
;This flag is the switch of checking BIOS version.
;Flag (dwsDWS)
; default : 2.
; 0 : Don't check rom file version.
; 1 : Check BIOS version.
; When rom file version is older than BIOS, it will
display
; a warning message and close application.
; 2 : Depend on BIOS report.
;CheckByBios (dwsDWS)
; default : 0.
; 0 : Normal process.
; 1 : It will pass version by IHISI to BIOS and check by
BIOS.
; When BIOS return not allow to flash, it will be
terminated the process.
; When BIOS allow to flash, it will go ahead and do it's
normal process.
; When this flag is enable but BIOS not support, it will
skip version check and assume allow to flash.
;CheckByBiosErrorMessage (dwsDWS)
; default : "This BIOS file is not allow to flash. The flash
process will be terminated."
; String : User defined error message when BIOS is not allow to
flash this version image.

; Supports on DOS WIN SHELL flash.

[BIOSVersionFormat]
BIOSVFEnable=1
VersionFormat=XN.NNDDDDDDDDDDD
;This BIOSVFEnable flag is the switch of BIOSVersionFormat.
;FunctionEnable (dwsDWS)
; default : 0
; 0 : function is disabled.
; 1 : function is enabled.
;VersionFormat (dwsDWS)
; X : The field is masked. It will NOT be compared.
; N : The digit field can be ASCII, case-sensitive.
; T : It's the same definition with N. But T is a case-
insensitive.
; . : Dot is also a mask. It will NOT be compared.
; D : Don't care field. It will NOT be compared.
; This field can be empty.
; It only allow to put at start or end of the version
format.
; For example: Onboard version 1.21B flash to 1.22,
VersionFormat must be N.NND
; N.NND means the valid format is N.NN and
N.NNX, the 5th character will be ignore in version compare.

; Supports on WIN flash.

[PermitFlashVersion]
PFVFunctionEnable=0
SingleVersion=
MultiVersion1=
MultiVersion2=
MultiVersion3=
MultiVersion4=
MultiVersion5=
MultiVersion6=
MultiVersion7=
MultiVersion8=
MultiVersion9=
MultiVersion10=
MultiVersion11=
MultiVersion12=
MultiVersion13=
MultiVersion14=
MultiVersion15=
MultiVersion16=
MultiVersion17=
MultiVersion18=
MultiVersion19=
MultiVersion20=
;This section is for conditional version definition for BIOS update.
;When this function enabled, flash utility will compare on board BIOS version with
conditional version and then decide to continue flash progress or not.
;For example: In following condition PFVFunctionEnable=1, SingleVersion=A03,
"Please update to BIOS version A03 first!".
; When on board BIOS version is older than A03,
; it will pop up the error dialog with the message "Please update to
BIOS version A03 first!" and then terminated.
; Otherwise it will continue original flash process.
;The MultiVersion1~20 are similar as SingleVersion, but they only available when
the [Platform_Check] is enable to compare the 20 platform IDs.
;They must be pair of the PlatformName of [Platform_Check] section.
;For example: When the platform ID matches with PlatformName2, the Version2 will be
used.
;PFVFunctionEnable (wW)
; default : 0.
; 0 : Disable conditional version check.
; 1 : Enable conditional version check.
;SingleVersion (wW)
; default : empty.
; String : XXXX, "Message String"
; XXXX is the conditional version, regarding version
check rule please refer section "BIOSVersionFormat".
; "Message String" is the message to show when the on
board BIOS version is older than the conditional version.
;MultiVersion1~20 (wW)
; default : empty.
; String : XXXX, "Message String"
; XXXX is the conditional version, regarding version
check rule please refer section "BIOSVersionFormat".
; "Message String" is the message to show when the on
board BIOS version is older than the conditional version.
;
; The section is depended on other sections if using [PermitFlashVersion].
; a. If single version is enabled,
; Please also configure section [Bios_Version_Check] for version
check
; b. If multi-version is enabled,
; Please also configure following sections [Bios_Version_Check]
for version check,
; section [Platform_Check] for platform name check and section
[PlatformVersion] for multi-platform version check

; Supports on DOS WIN SHELL Secure flash.

[FlashComplete]
Action=2,0
Dialog=0
Counter=15
ActionOverride=0
Pause=0
PauseWarning=messagestringA03
;Action (dwsDWS)
; default : 2.
; 0 : Do nothing.
; 1 : Shutdown.
; 2 : Reboot.
;Dialog (w)
; default : 0.
; 0 : Don't display dialog.
; 1 : Display dialog.
; 2 : Display dialog and wait several seconds.
;Counter (w)
; default : 15. (Unit is second)
; Integer : The number of seconds for countdown to reboot or
shutdown.
;ActionOverride (w)
; default : 0
; 0 : This key is disabled. Flash utility bases action key
setting to do original behavior.
; 1 : This key is enabled. Flash utility just does close
itself in silent mode.
;Pause (dwsDWS)
; default : 0.
; 0 : disable to pause after flash complete.
; 1 : enable to pause after flash complete.
;PauseWarning (dwsDWS)
; default : messagestringA03
; String : A key name which list in [MessageStringTable].
;The value behind comma is the return value in silent mode.

; Supports on WIN SHELL flash.

[FlashSecureBIOSOverride]
EnableFlashSecureBIOSOverride=0
Action=1
;EnableFlashSecureBIOSOverride (WS)
; default : 0.
; 0 : Disable action override. Use the action which returned
from BIOS.
; 1 : Enable the action override when flashing secure BIOS
in OS.
;Action (WS)
; default : 1.
; 0 : S3.
; 1 : Reboot.
; 2 : Shutdown.
; 3 : Do nothing.

; Supports on WIN SHELL Secure flash.

[ForceFlash]
ALL=1
BB_PEI=0
CPU_Microcode=0
Variable=0
DXE=0
EC=0
Password=0
OEM_NVS=0
Logo=0
Type#09=0
Type#08=0
UseBvdtRomMap=0
;These areas are reported by IHISI from BIOS for protection.
;When you set the value to 1, the selected protect area will be force flash.
;ALL (dwsDWS)
; default : 0.
; 0 : Reserve all protected areas.
; 1 : Flash all protected areas.
;BB_PEI, CPU_Microcode, Variable, DXE, EC, Password, OEM_NVS, Logo (dwsDWS)
; They are the predefined types each one indicate a type
value.
; BB_PEI = Type#00
; CPU_Microcode = Type#01
; Variable = Type#02
; DXE = Type#03
; EC = Type#04
; Password = Type#0F
; OEM_NVS = Type#10
; Logo = Type#05
; default : 0.
; 0 : Protect this area.
; 1 : Force flash this area.
;Type#NN (dwsDWS)
; Type#NN is an extended method for those didn!|t have
predefine type.
; The NN is a number in Hex.
; For example:
; If BIOS report to protect type 13h from IHISI, and you
want to flash this protect area.
; Then the setting in platform.ini can add Type#13=1.
; default : 0.
; 0 : Protect this area.
; 1 : Force flash this area.
;UseBvdtRomMap (DWS)
; default : 0.
; 0 : Disable private/protection ROM map override feature.
; AP will reference IHISI report to protect regions.
; 1 : Enable private/protection ROM map override feature.
; AP will reference BVDT defined map to protect regions.

; Supports on DOS WIN SHELL Secure flash.

[Region]
BIOS=1
GbE=0
ME=0
DESC=0
Platform_Data=0
;This section is used to control SPI descriptor mode.
;Default is flash all regions when the values all set to 0.
;If any one of the regions set to 1, it will only flash specific regions.
;If the BIOS is built without additional Intel firmware as like ME, GBE and
Descriptor
; or BIOS is an AMD firmware which does not support ME, please ignore this section.
;BIOS (dwsDWS)
; default : 0.
; 0 : Don't flash.
; 1 : Flash BIOS region.
;GbE (dwsDWS)
; default : 0.
; 0 : Don't flash.
; 1 : Flash GbE region.
;ME (dwsDWS)
; default : 0.
; 0 : Don't flash.
; 1 : Flash ME region.
;DESC (dwsDWS)
; default : 0.
; 0 : Don't flash.
; 1 : Flash Descriptor region.
;Platform_Data (dwsDWS)
; default : 0.
; 0 : Don't flash.
; 1 : Flash Platform Data region.

; Supports on WIN SHELL Secure flash.

[UpdateEC]
Flag=1
EC_Dialog=0
BIOS_Only=0
EC_Only=0
EC_Path=
EC_Compare=0
EC_Verify=0
EC_VerifyErrorRetry=3
EC_BlockSize=128
EC_DockWarning=messagestringA04
;Flag (w)
; default : 0.
; 0 : Don't flash EC by BIOS.
; 1 : Flash EC by BIOS.
;EC_Dialog (w)
; default : 0.
; 0 : Don't display confirm dialog when begin to update EC.
; 1 : Show confirm dialog.
;BIOS_Only (w)
; default : 0.
; 0 : Flash EC and BIOS file.
; 1 : Only flash BIOS part of the merge file.
;EC_Only (w)
; default : 0.
; 0 : Flash EC and BIOS file.
; 1 : Flash only EC binary file.
;EC_Path (w)
; default : empty.
; String : EC filename.
;EC_Compare (w)
; default : 0.
; 0 : Don't do compare before writing. Just do write action
directly.
; 1 : Read EC and compare difference before writing.
; If the read data is the same as the data we want to
write,
; it will not do the write action.
;EC_Verify (w)
; default : 0.
; 0 : Don't verify EC.
; 1 : Verify EC after writing.
;EC_VerifyErrorRetry (w)
; default : 3.
; Integer : Retry times.
; If the value is not zero means enable verify retry,
and will retry setted times.
; 0 for disable verify retry.
;EC_BlockSize (WDS)
; default : 64.
; Integer : The block size of EC update. Unit is KB.
;EC_DockWarning (dsS)
; default : messagestringA04
; String : A key name which list in [MessageStringTable].

; Supports on WIN flash.

[UpdateExtraData]
Flag=0
DataType=1
type1errorcodeA0=messagestring1
;Flag (w)
; default : 0.
; 0 : Do not update extra data.
; 1 : Update extra data by IHISI.
; If new image is NOT processed by IFIT tool, please do
not enable this function.
;DataType (w)
; default : 1.
; Integer : Integer number. The meaning of data type number will
define by BIOS OEM.
; Now will support 1, 4~C.
; Ex:1,4,6,5 -> Mean you want to update 1,4,6,5 Four
type of data.
; Notice: 2, 3 cannot used.
;type#errorcode??=messagestringX (w)
; This key is for customizing error message which occur
in update extra data.
; For example:
; When an error occur when updating type 4, BIOS return
the error code A2.
; AP will find the key "type4errorcodeA2" and get the
string ID "messagestring4", and find the string in [MessageStringTable].
; Then shows the message string instead of standard
error message.
; # : The type number define in DataType. (Hex)
; ?? : The error code returned by BIOS. Available value range
A0~AF.
; X : Message string number.
;This feature will let you just input data to update by IHISI. Data type will
define by BIOS OEM.
;If new image is NOT processed by IFIT tool, please do not enable this function.

; Supports on WIN SHELL flash.

[UpdateOEMME]
MEFileName=
CheckVersion=0
Command=
;MEFileName (ws)
; default : empty.
; String : When this filename or Multi-FD ME filename exist, tool
will run this case to flash ME.
;CheckVersion (w)
; default : 0.
; 0 : Don't check ME file version.
; 1 : Check ME file version.
; 2 : When ME flash error is cause of same version and
downgrade version do not show error and continue to flash.
; 3 : When ME flash error, show error but continue to flash.
;Command (ws)
; default : empty.
; String : When this field is empty and don't want to check ME
version, utility will use "-f %filename -generic -allowsv" as default command.
; The %filename is a keyword which will be replaced with
the value in MEFileName within this section or the filename in MULTI_FD section.
;NOTE:
; The Intel firmware update tool (FWUpdLcl.exe) is dependent on each chipset
generation, the tool in release flash package is a sample and may be not suitable
for your project.
; Please remember to replace the FWUpdLcl.exe with right version before you will
utilize function to update Intel firmware (ME or TXE).

; Supports on WIN SHELL flash.

[Log_file]
Flag=0
FileName=H2OFFT.log
CMOS_Flag=0
CMOS_INDEX_PORT=70
CMOS_DATA_PORT=71
CMOS_OFFSET=68,69
;Flag (wsWS)
; default : 0.
; 0 : Don't log to file.
; 1 : Utility will log to specify file.
;FileName (wsWS)
; default : H2OFFT.log.
; String : Log filename.
;CMOS_Flag (wW)
; default : 0.
; 0 : Disable CMOS debug.
; 1 : Enable CMOS debug.
;CMOS_INDEX_PORT (wW)
; default : 70. (hex)
; 70 : Use 0x70 port as index port.
; 72 : Use 0x72 port as index port.
;CMOS_DATA_PORT (wW)
; default : 71. (hex)
; 71 : Use 0x71 port as index port.
; 73 : Use 0x73 port as index port.
;CMOS_OFFSET (wW)
; default : 0,0. (hex)
; CMOS_OFFSET=xx,yy the xx is high byte offset; yy is
low byte offset, and the range is 0~FF (hex)

; Supports on WIN flash.

[ReturnErrorCode]
FileNotFound=3,259
ErrorBeforeFlash=4,259
BatteryNotConnect=4,259
BatteryCapacityNotEnough=4,259
WriteROMFail=5,259
WriteECFail=6,259
WriteExtraDataFail=7,259
;FileNotFound (wW)
; default : 3.
; Integer : If utility can't find the BIOS file, it will return
this error code.
;ErrorBeforeFlash (wW)
; default : 4.
; Integer : If error occur before flash process, it will return
this error code.
;BatteryNotConnect (wW)
; default : 4.
; Integer : If battery not connect, it will return this error
code.
; (This error is separated from ErrorBeforeFlash.)
;BatteryCapacityNotEnough (wW)
; default : 4.
; Integer : If battery capacity not enough, it will return this
error code.
; (This error is separated from ErrorBeforeFlash.)
;WriteROMFail (wW)
; default : 5.
; Integer : If error occur during write ROM process, it will
return this error code.
;WriteECFail (wW)
; default : 6.
; Integer : If error occur during write EC process, it will return
this error code.
;WriteExtraDataFail (wW)
; default : 7.
; Integer : If error occur during write Extra Data process, it
will return this error code.
;The value behind comma is the return value in silent mode.

; Supports on WIN flash.

[ReturnCodeDefinition]
RETURN_SUCCESSFUL=0,3010
RETURN_MODEL_CHECK_FAIL=259,259
RETURN_USER_CONFIRM_CANCEL=1701,259
RETURN_AC_NOT_CONNECT=1702,259
RETURN_LOAD_DRIVER_FAIL=1703,259
RETURN_NEED_REBOOT=3010,3010
RETURN_USER_EXIT=1704,259
RETURN_SAME_VERSION_CHECK=99999,259
;RETURN_SUCCESSFUL (wW)
; default : 0.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;RETURN_MODEL_CHECK_FAIL (wW)
; default : 259.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;RETURN_USER_CONFIRM_CANCEL (wW)
; default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;RETURN_AC_NOT_CONNECT (wW)
; default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;RETURN_LOAD_DRIVER_FAIL (wW)
; default : 259.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;RETURN_NEED_REBOOT (wW)
; default : 3010.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;RETURN_USER_EXIT (wW)
; default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;RETURN_SAME_VERSION_CHECK (wW)
; default : 1602.
; Integer : Use input value as return code.
; 99999 : Use the default value above.
;The value behind comma is the return value in silent mode.

; Supports on DOS WIN SHELL Secure flash.

[Others]
DisableCompare=0
DisableVerify=0
VerifyErrorRetry=3
SMIErrorRetryDelay=100
SMIErrorRetry=5
ForceIHISIVersion=
EnablePrivateRegionMovement=0
EnableProtectionRegionMovement=0
DisableSecureCapsuleFlash=0
BootSafeMode=0
;DisableCompare (wsWS)
; default : 0.
; 0 : Read BIOS and compare difference before writing.
; If the read data is the same as the data we want to
write,
; it will not do the write action.
; 1 : Don't do compare before writing. Just do write action
directly.
;DisableVerify (wsWS)
; default : 0.
; 0 : Verify BIOS after writing.
; 1 : Don't verify BIOS after writing.
;VerifyErrorRetry (wsWS)
; default : 3.
; Integer : Retry times.
; If the value is not zero means enable verify retry,
and will retry set times.
; 0 for disable verify retry.
;SMIErrorRetryDelay (wsWS)
; default : 100. (Unit is millisecond)
; Integer : Delay time during SMI error retry (millisecond).
;SMIErrorRetry (wsWS)
; default : 5.
; Integer : Retry times when SMI fail. (Note: This may let flash
time become longer.)
;ForceIHISIVersion (w)
; default : empty.
; Version : This flag will force override the IHISI version which
will passing to BIOS.
; Ex: 1.9.1
;EnablePrivateRegionMovement (wsDWS)
; default : 0
; 0 : Disable private region movement.
; 1 : Enable private region movement. It will backup orginal
private regions and relocate to new address which defined in new image BVDT when
update whole BIOS.
;EnableProtectionRegionMovement (sDWS)
; default : 0
; 0 : Disable protection region movement.
; 1 : Enable protection region movement. It will backup
orginal protection regions and relocate to new address which defined in new image
BVDT when update whole BIOS.
; This flag cannot be used with [ForceFlash] all=1.
;DisableSecureCapsuleFlash (dwsDWS)
; default : 0.
; 0 : Enable flash secure BIOS on normal platform.
; 1 : Disable flash secure BIOS on normal platform.
;BootSafeMode (wW)
; format : [Number],[Version String]
; [Number] default : 0.
; 0 : Disable this feature. Normal boot.
; 1 : Enable this feature. Next boot into Windows safe mode.
; [Version String] default : empty.
; The limit version.
; When onboard BIOS version smaller than or equal to
this version, it allow to enable this feature.
; When onboard BIOS version bigger than this version,
this feature always disable even the value is set to 1.

; Supports on WIN flash.

[PasswordCheck]
PasswordCheckEnable=0
MsgCaption=Password confirmation
MsgPreface=Please enter password
MsgSuccess=Password is correct.
MsgFailure=Password is incorrect. Please retry again.
;PasswordCheckEnable (wW)
; default : 0.
; 0 : Disable the password check function.
; 1 : Enable the password check function.
;MsgCaption (wW)
; default : "Password confirmation"
; String : The dialog box caption.
;MsgPreface (wW)
; default : "Please enter password"
; String : The preface of password entering.
;MsgSuccess (wW)
; default : "Password is correct."
; String : The string displayed when the comparing result
returned by BIOS is 0x00.
;MsgFailure (wW)
; default : "Password is incorrect. Please retry again."
; String : The string displayed when the comparing result
returned by BIOS is 0x01.

; Supports on DOS WIN Shell flash.

[MessageStringTable]
messagestring1="Warning message 1"
messagestringA00="It only supports to flash secure BIOS on current platform.\r\nThe
image to be updated is not a secure BIOS.\r\n"
messagestringA01="Not allow to flash secure BIOS on current platform.\r\n"
messagestringA02="Please do not remove the AC power!"
messagestringA03="Press any key to continue... "
messagestringA04="Get EC part information fail."
messagestringA05="Insyde H2OFFT cannot run on battery power. Please plug in AC
power and try again."
messagestringA06="Please insert system battery."
messagestringA07="Battery is too low (%d < %d). Please charge your battery to %d%
%."
;messagestring# (dwsDWS)
; default : empty.
;The message string must as following format messagestring#="Your message here."
;The # is a number in Decimal or Hex.
;If a multi line message is required, you can use "\n" in message string for new
line.

; Supports on Secure flash.

[FactoryCopy]
Restore=0
;Restore (DWS)
; default : 0.
; 0 : Don't do FACTORY_COPY restore after flash.
; 1 : Restore FACTORY_COPY after flash BIOS.
;Factory copy is a region in BIOS which is used to store default keys of Secure
Boot.

; Supports on DOS WIN flash.

[CapsuleAudit]
Flag=0
QAKey=
OemKey=
;Flag (dw)
; default : 0.
; 0 : disable.
; 1 : enable Capsule Update Audit.
;QAKey (dw)
; default : empty.
; String : image file signing by Insyde QA test key.
;OemKey (dw)
; default : empty.
; String : image file signing by OEM/ODM key.

; Supports on WIN Shell flash.

[SecureUpdate]
viaESP=1
PhysicalMemoryAllocateFailRetryTimes=3
PhysicalMemoryAllocateFailRetryDelay=500
;viaESP (WS)
; default : 0.
; 0 : disable.
; 1 : write the capsule to ESP (EFI system partition).
;PhysicalMemoryAllocateFailRetryTimes (W)
; default : 3.
; Integer : Retry times.
; If the value is not zero means enable physical memory
allocate fail retry, and will retry setted times.
; 0 for disable retry.
;PhysicalMemoryAllocateFailRetryDelay (W)
; default : 500. (Unit is millisecond)
; Integer : Delay time during secure update plysical memory
allocate fail retry (millisecond).

; Supports on WIN Secure flash.

[AutoWakeup]
Flag=0
Interval=120
;Flag (wsWDS)
; default : 0.
; 0 : disable.
; 1 : enable auto power on via RTC.
;Interval (wsWDS)
; default : 120.
; Integer : unit is second. interval time after system turn off.
;

[SecurityFlashFactoryUpdate]
UpdateNvStorage=1