Transporter 2-Instructions-V2.0
Transporter 2-Instructions-V2.0
(WITH DVR)
Disclaimer
Please read the disclaimer carefully before using this product. By using this product, you
hereby agree to this disclaimer and signify that you have read them carefully and
completely. This product is not suitable for people under the age of 18.
This product is a flying goggles specially designed for FPV flight. You can view the camera
picture in real time from a first-person view. Dynamic images or changing light may make
you feel dizzy, lose your balance, or cause other discomfort. .
Please read the instruction manual and warnings carefully. Before every flight, make sure the
battery is fully charged and power connections are secure. DO NOT fly around crowds,
children, animals or objects.
Precautions
1.Please follow the instructions to assemble and to operate this product in a proper way.
3.Extended use of this product may cause eye strain or physical discomfort.
4.Please stop using this product immediately if you feel any discomfort during use.
5.Do not use this product if you have physical or mental illness, dizziness, fatigue, or while
under the influence of alcohol or drugs.
6.Please operate in a safe area away from people according to local regulations.
7.Do not modify or use other parts and accessories not approved for use by EMAX.
8.Do not use this product in harsh environments (such as winds, rain, lightning, snow, etc.).
Support
Please visit emax-usa.com or emaxmodel.com for any updates or support needs.
USER GUIDE
2. Band Button
3. Channel Button
4. Recording
5. Audio
6.Micro USB
7. Recording indicator
8. Charger indicator
9. Antenna
(Click to enter the menu, press and hold for 2 seconds to power on/off)
12. Reset
13. SD slot
14.Headband slot
15. Sponge
16.Tripod Mount
17.Display
18. Magnet
Assemble
Band selection button : Click to select the A/B/E/F/R/H frequency bands. (In the
menu mode, the key is "confirm" or "+". For example, select the "DVR" option in the menu,
briefly press B to enter the "DVR" mode. At this time, press B or C to select the video, press
R to play, B to adjust the forward playback speed, and C to adjust the reverse playback
speed.)
Frequency channel button : Used as the frequency channel button to select 1-8
frequency channels. (In the menu mode, the key is "-". For example, select the "DVR"
option in the menu, briefly press B to enter the "DVR" mode. At this time, press B or C to
select the video, press R to play, B to adjust the forward playback speed, and C to adjust the
reverse playback speed.)
Record button :Click to start recording, click it again to stop.In DVR mode,
play/pause (After a short press to start recording, a red dot appears on the screen to
start recording. At the same time, the red light is on and the red LED starts flashing
after about 10 seconds)
Auto Scan Button :Click to automatically select the correct channel and frequency,
press and hold for 1.5 seconds to switch to AV mode,In DVR mode, delete the current file.
Record indicator (DVR working status) (The indicator light is red when the battery
is charging . The indicator light will turn green when charging is complete)
SD slot
Product specification
Goggles
Resolution 480×800
Frequency 5658-5945MHz(40CH)
Antenna 2* 3dB
To stop recording, click the R button during recordingthen the red indicator and DVR red
(Caution: Auto Scanning may mis-select a channel close to your correct channel. Please
adjust to the correct channel before flight.)
2.Manual Selection: There are 2 buttons (CH and FR) that can manually select the correct
channel and frequency band. The table below shows the channel and frequency band map
with the respective frequency number.
Channel