Scribd
Upload
25 views2 pages

Multron MX230 V1.1 Iso Mod

Uploaded by

John
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views2 pages

Multron MX230 V1.1 Iso Mod

Uploaded by

John
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MX Series

Intelligent Fire Alarm Systems

MX230
Addressable Isolator Module

Features and Benefits


 EN54-17:2005 Compliance
 LPCB Approved
 In the event of a short circuit, isolates faulty parts of the loop. 1330f-(cl-1)
 Automatically Reset, once the fault is cleared
 Monitor up to 70 devices
 LED Status Indicator
 Loop Powered
 Aesthetically pleasing design
 Surface Mounting with Base for ease of installation

Overview
The Unit is manufactured in compliance to European Standards EN 54 Part 17. In the event of short circuit on
the detection loop the MX230 Isolators on either side of the loop will detect the problem and open circuit to
isolate the faulty part of the loop, enabling other devices on the unaffected part of the loop to operate
normally. The module will continue to monitor for the fault to be repaired, once the fault is cleared the isolator
will automatically reinstate the effected part of the loop.

The unit is aesthetically pleasing with unobtrusive design that will complement modern building designs and its
plug-in type assembles make installation and maintenance more convenient to the installer. The MX230
Isolator Module is compatible to the MX Series Intelligent Addressable Fire Alarm System, produced by single
manufacturer, to avoid addressable communication compatibility problem.

Multron Systems Pte Ltd DATA SHEET


217 Kallang Bahru, Multron Building Copyright © The information contained in this
Data Sheets remains the property of Multron
Singapore 339 347 Systems Pte Ltd, and is not to be altered or
: (65) 6395 6868 reproduce without permission.
Multron reserves the right to change any
: (65) 6395 6869 specification without prior notice.
: info @ multron.com.sg Version : 31-03-2018
MX Series
Intelligent Fire Alarm Systems
Technical Specification
Approvals and Standards LPCB / CE-CPR, EN54-17:2005
Input Voltage 24VDC (16V to 28V)
Current Consumption Standby : 0.15mA Alarm : 1.8mA
Maximum Open Voltage (VSO MAX) 11V
Minimum Open Voltage (VSO MIN) 8V
Maximum Close Voltage (VSC MAX) 3V
Minimum Close Voltage (VSC MIN) 1.4V
Maximum Continuous Current (IC MAX) 500mA
Maximum Transient Output Current (IS MAX) 5A
Maximum Leakage Current (IL MAX) 2mA
Max closed impedance (ZC MAX) 0.65 ohms
Protocol Proprietary
Number of monitored Max 70 Devices
Output Impedance 480 ohms
Indicator Status Normal : Single blink Active : Steady-on
Material / Colour ABS White Glossy finishing
Dimension 108mm Width x 86mm Height x 38mm Depth
Weight 152g (with Base) 81g (without Base)
Ingress Protection IP30
Humidity 0 to 95% Relative Humidity, Non condensing

Terminal Description
Z1 Signal In (+)
Z1 Signal Out (+)
Z2 Signal In (-)
Z2 Signal Out (-)

You might also like