WST 1210T

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Specifications

Item Unit Specifications

Rated Voltage VDC 5

Operating Voltage VDC 3~8


ELECTRO Rated Current mA Max. 30 at 5 VDC
MAGNETIC Sound Output dB Min. 85 at 5 VDC
BUZZER Tone Continuous

Acoustic Product Specification Resonant Frequency Hz 2300±300

Operating Temperature ˚C -20 ~ +70


Product Number: WST-1210T
Storage Temperature ˚C -30 ~ +80

Dimensions mm Ø12.0 x H9.5

Pin Length mm L1= 4.0±0.5, L2= 5.5±0.5, ø0.6±0.1

Housing Material Black PBT

Net Weight gram Approx. 1.7

Terminal Pin Type

Environmental Protection RoHS 2.0


Regulation
Release | Revision: A/2022

CONTENTS
This document contains the
technical specifications for the
electromagnetic buzzer with
Dimensions
built-in oscillating circuit.

Unit mm
Page 1 Tolerance ±0.5mm, except where specified
Specifications

Dimensions

Page 2
Reliability Test

Page 3
Electrical and Acoustical
Measuring Condition

Recommended Wave Soldering


Temperature

Page 4
Packing

Pitch: 7.6mm

Housing Material: Black PBT

www.soberton.com
Reliability Test

After any of the following tests the part shall meet specifications without any
degradation in appearance and performance except SPL. SPL shall meet the
specifications and shall not deviate more than -10dB from the initial value.
ELECTRO
MAGNETIC Standard Temperature Life Test

BUZZER The part shall be subjected to 96 hours at 25±10℃.

Acoustic Product Specification Input rated voltage: 5 VDC

Resonant frequency: 2300Hz, 50% duty cycle, square wave.


Product Number: WST-1210T

High Temperature Test

The part shall be capable of withstanding a storage temperature


of +80℃ for 96 hours.

Low Temperature Test

The part shall be capable of withstanding a storage temperature


of -30℃ for 96 hours.

Humidity Test
Release | Revision: A/2022
Temperature +40℃±3℃

Relative Humidity 90% ~ 95%

CONTENTS Duration 48 hours and exposure to room temperature for 6 hours


This document contains the
technical specifications for the Temperature Shock Test
electromagnetic buzzer with
built-in oscillating circuit. Per cycle
70℃ /1 hour → 25℃/3 hours → -30℃/1 hour → 25℃/3 hours
Page 1
Specifications Total cycle 10 cycles

Dimensions Drop Test

Page 2 Standard Packaging from 75mm


Reliability Test
Drop on hardwood or board of 5cm thick, three sides, six plain
Page 3
Electrical and Acoustical Vibration Test
Measuring Condition
Vibration 1000 cycles/min.
Recommended Wave Soldering
Temperature
Amplitude 1.5mm
Page 4
Packing Duration 1 hour in each 3 axes

Note

Please make sure that any foreign materials (e.g. magnetic powder,
washing solvent, flux, corrosive gas) do not enter this product in your
production processes. Contamination may result in a loss of some or
all audio output.

www.soberton.com
Electrical and Acoustical Measuring Condition

Recommended Test Circuit

ELECTRO
MAGNETIC
BUZZER
Acoustic Product Specification

Product Number: WST-1210T

Recommended Setting

Release | Revision: A/2022

CONTENTS
This document contains the
technical specifications for the
electromagnetic buzzer with
built-in oscillating circuit. Recommended Wave Soldering Temperature

Page 1
Specifications

Dimensions

Page 2
Reliability Test

Page 3
Electrical and Acoustical
Measuring Condition

Recommended Wave Soldering


Temperature

Page 4
Packing

www.soberton.com
Packing

ELECTRO
MAGNETIC
BUZZER
Acoustic Product Specification

Product Number: WST-1210T

Release | Revision: A/2022

CONTENTS
This document contains the
technical specifications for the
electromagnetic buzzer with
built-in oscillating circuit.

Page 1
Specifications

Dimensions

Page 2
Reliability Test

Page 3 Packing Method Quantity (pc) Measurement (mm)


Electrical and Acoustical
Per Tray 100 240x160x27
Measuring Condition
Bundle 1000 240x160x225
Recommended Wave Soldering
Temperature
Carton 5000 500x420x270
Page 4
Packing

www.soberton.com

You might also like