Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    Udzbenik Fizika MR - SC - Josip Paic V.pred

    Uploaded by

    soldier855
    Fizika za srednje škole za gimnazije.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Udzbenik Fizika MR - SC - Josip Paic V.pred

    Uploaded by

    soldier855
    7 views2 pages
    Fizika za srednje škole za gimnazije.

    Original Title

    Udzbenik Fizika Mr.sc . Josip Paic v.pred

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Fizika za srednje škole za gimnazije.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views2 pages

    Udzbenik Fizika MR - SC - Josip Paic V.pred

    Uploaded by

    soldier855
    Fizika za srednje škole za gimnazije.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FIX 11

    UNIVERSAL HIGH INITIAL TACK ADHESIVE

    Universal elastic adhesive based on MS polymer with high


    initial bonding strength and with excellent adhesion on the
    majority of building materials: concrete, brick, wood,
    aluminium, iron, stainless steel, copper and various types
    of plastics. It replaces mechanical fixing and it is ideal
    solution for bonding of heavy parts.

    PROPERTIES
    • Ideal for bonding of heavy parts.
    • High final bonding strength 350 kg/10 cm².
    • Excellent adhesion to most building and metal
    materials - concrete, brick, wood, aluminium, iron,
    stainless steel, copper and various plastics.
    • Excellent adhesion even to wet surfaces.
    • Good extrusion even at low temperatures.
    • It does not slide in vertical cracks.
    • Shrinkage at curing is less than 1.5%.
    • Chemically neutral and odourless.
    • Environmentally friendly; free of solvent, isocyanate and silicones.
    • It can be painted with most paints and varnishes based on epoxies, polyurethanes and water.
    • Resistant to weather conditions, UV light and aging.
    • Does not cause corrosion.
    • Chemical resistance:
    – good:
    water, aliphatic solvents, mineral oils, fats, dilute inorganic acids and bases,
    - poor or not resistant:
    aromatic solvents, concentrated acids and chlorinated hydrocarbons.
    • Colour: white.

    TESTS AND CERTIFICATES


    Food contact
    GEV EMICODE EC 1 PLUS

    AREA OF USE
    • It is used for gluing of stair-steps, shelves, wooden trims, corner profiles, ceramic tiles, mirrors, and signs.
    • To fill cracks.
    • For various gluing in the household (in the kitchen, bathroom…).
    • For various gluing in construction, automotive industry, mechanical engineering, shipbuilding, in the
    manufacture of containers ...

    1
    TKK_FIX_11, TD_V1_GB_10_20.docx
    TECHNICAL DATA
    Fresh mass
    Base: hybrid MS-polymer
    Appearance: paste
    Curing mechanism: with air humidity
    Specific weight: 1500 ± 30 kg/m³
    Skin formation time 23 °C/50% RH: 10 ± 5 min
    Curing time 23 °C/50% RH: 2–3 mm/day
    Application temperature: from +5 °C to +30 °C
    Cured mass
    Shore-A hardness (ISO 886): 55 ± 5
    Volume change (ISO 10563): < 1.5%
    Tensile strength (ISO 8339): 1.5 ± 0.3 MPa
    Module E 100% (ISO 8339): 1.0 ± 0.3 MPa
    Elongation at break (ISO 8339): 150% ± 50%
    Tensile strength (ISO 37): 2.3 ± 0.3MPa
    Elongation at break (ISO 37): 200 ± 50%
    Temperature resistance: from -40 °C to +90 °C

    The values can vary depending on the temperature, humidity and type of bonded substrate.

    INSTRUCTIONS FOR USE


    • The surfaces must be solid, clean and free of dust and grease.
    • Cut the cartridge by the thread, screw on the supplied V-neck tip and insert into the gun.
    • Apply the glue by holding the gun vertically on the surface to get a triangular application of glue.
    • Apply the adhesive to one of the glued surfaces in horizontal lines (line width approx. 8 -10 mm).
    • After applying the glue, join both surfaces together.
    • For gluing heavier parts, we recommend additional fastening.
    • Tools and fresh mass can be cleaned with alcohol. The hardened mass can be removed mechanically.

    PACKAGING
    • 300 ml cartridge

    STORAGE
    15 months in a dry place at a temperature between 5 °C and 25 °C, in the original sealed packaging.

    HEALTH, SAFETY, HANDLING AND DISPOSAL INFORMATION


    Additional safety information, safe handling instructions, information on personal protective equipment, and
    disposal information can be found in the safety data sheet. Safety data sheet available on request. You can also
    obtain a copy from your TKK sales representative.

    WARNING
    The information given is based on our tests and practical experience. However, due to specific conditions and
    working methods we recommend preliminary tests for each case of use.

    2
    TKK_FIX_11, TD_V1_GB_10_20.docx

    You might also like