Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Creep Ffs

    Uploaded by

    Navarin Tvk

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Creep Ffs

    Uploaded by

    Navarin Tvk
    24 views3 pages

    Original Title

    creep ffs

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views3 pages

    Creep Ffs

    Uploaded by

    Navarin Tvk

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    FFS Creep Level 1

    API 579-2 Cases 10.1

    Let’s Try !!!!

    σMAX

    Mohammed Arif Mazlan


    linkedin.com/in/arif-mazlan

    Step 1: Applicabality
    Fullfilled The Requirement

    Step 3: Minimum Hardness & Carbon Content


    Fullfilled The Requirement

    Step 3: Operating Condition

    Excursion Temperature tExcurison °F 950

    If the weld area exposed to Excursion Temperature, Add 25 °F as Maximum


    Is it Weld exposed to Max Temperature ? YES
    Temperature Excursion

    Adjusted Temperature tSE °F 975 tSE = texcursion + 25°F = 950°F + 25°F

    Excursion Pressure PMAX psig 82.6

    Excursion Duration TExcursion hours 20

    Step 4: Nominal Stress


    Analysis done based on Future Corroded condition

    Compenent Cylinder

    Weld Efficiency E 1

    Future Corrosion Allowance FCA in. 0.1

    Inside Diameter Di in. 60

    Inside Radius-design Ri in. 30


    Inside Radius-future corroded Ricorr in. 30.1

    Design Thickness tnom in. 0.375

    Thickness-Future Corroded tc in. 0.275

    API 579-1
    Circumferrential Stress σC psig 9091 Equation (2C-11)
    Cylindrical Shells

    Thickness for Supplemental load Tsl in. 0 Additional Design Thickness as consideration e.g. External load

    API 579-1
    Circumferrential Stress σL psig 4504 Equation (2C-17)
    Cylindrical Shells

    Maximun membrane stress σMAX psig 9091

    ksi 9.1
    Step 5: Screening Stress Curve

    Material Specification SA-516


    Material Grade Gr. 60
    Fall Betwwen 25 hours to
    250 Hours

    σMAX= 9.1 ksi

    Material Carbon steel *refer CS table screening in Table 10.1

    tSE = 975 °F

    Screening & Damage curve Figure 10.3

    Step 6: Max Permissible Time for Operation / Acceptance


    Adjusted Temperature tSE °F 975

    Maximun membrane stress σMAX psig 9060.5


    ksi 9.1

    Exposure Duration TExcursion hours 20

    Max permisible duration TPermissible hours 25 hr to 250 hr

    Acceptable PASS

    Mohammed Arif Mazlan


    linkedin.com/in/arif-mazlan

    You might also like