TDS Pink Thermal Slab Rev3

Technical data sheet
Pink® Thermal Slab

Commercial under slab/soffit insulation
Description
Pink® Thermal Slab is a highly effective soffit insulation material comprising of a semi-rigid glasswool board manufactured from
up to 80% recycled glass combined with Sisalation® Heavy Duty 450 Facing Foil laminate adhered to one side and is available
in various thicknesses.
Applications
Pink® Thermal Slab is suitable for use in commercial under slab soffit applications where thermal and acoustic properties are pivotal in
controlling noise levels and temperature fluctuations of concrete roofs, floors and walls. Pink® Thermal Slab provides excellent fire
performance for ceiling lining applications achieving a AS 5637.1 Group 1 NCC fire classification. Pink® Thermal Slab delivers excellent
thermal performance which in turn improves the energy efficiency of a building. Pink® Thermal Slab provides the added benefit of
exceptional acoustic absorption, which allows Architects, Specifiers and Builders to satisfy both thermal and acoustic design
requirements through the specification and installation of a single product.
Product data
Foil Facing Material R-value Thickness Width Length Pieces Coverage Product
m²K/W mm mm mm per pack per pack m2 code
R1.5 50 1200 2400 5 14.40 941107

Sisalation® R2.0 66 1200 2400 3 8.64 941110
Heavy Duty (HD) 450
R2.2 75 1200 2400 3 8.64 941108
R3.0 100 1200 2400 2 5.76 941109
Physical properties
Property Test method/standard Result Unit
Thermal resistance R-value AS/NZS 4859.1 Complies m2K/W

Maximum service temperature ASTMC 411/C447 Glasswool: 350 °C
Facing Materials: 70
pH ASTM C871 9 (does not contribute to the
corrosion of steel structures)
Moisture absorption ASTM C1104 < 0.2 % by volume
For more information: phone 1300 654 444 email [email protected] visit insulation.com.au
Fire hazard properties

Pink® Thermal Slab achieves the following results when tested in accordance with the following standards:
Property Test method/standard Result
Combustibility
AS 1530.1 Non-combustible
(unfaced 32kg glasswool product component only)
Early Fire Hazard Indices
Ignitability Index 0
Spread of Flame Index AS/NZS 1530.3 0
Heat Evolved Index 0
Smoke Developed Index 1
Flammability Index
AS/NZS 1530.2 ≤5
(Sisalation® Heavy duty 450 facing foil component)
Group number AS 5637.1 Group 1
AS ISO9705 Heat Release Rate & SMOGRA < 100
Health and safety

Pink® Thermal Slab is manufactured from FBS-1 Glasswool Bio-Soluble Insulation®. FBS-1 Glasswool Bio-Soluble Insulation® is safe to
use and meets the criteria of the Australian Safety and Compensation Council (formerly NOHSC) to be classified as non-hazardous.
Fletcher Insulation™ glasswool can be used with confidence in any residential, commercial or HVAC application. Pink® Thermal Slab
product contains a layer of aluminium foil and can conduct electricity. To avoid electrocution, care should be taken to ensure products
do not come into contact with electrical wiring during installation or use.
Environmental properties
Pink® Thermal Slab Glasswool is manufactured from up to 80% recycled glass which would otherwise go into landfill and be
unsuitable for alternative manufacturing processes. Fletcher Insulation avoids the use of Ozone Depleting Potential (ODP) substances
in the manufacture or composition of its FBS-1 Glasswool Bio-Soluble Insulation® and Sisalation® reflective foil products. The use of
Glasswool guarantees the use of Zero ODP insulation while also ensuring that no harmful levels of Volatile Organic Compounds
(VOCs) are released.
Acoustic performance
Sound absorption
Pink® Thermal Slab underslab insulation achieves the following sound absorption results when tested in accordance with AS ISO 354:
Sound absorption coefficients

at frequencies (Hz) of:
Sisalation® Heavy Duty 450 Thickness
Facing Foil mm 125 250 500 1000 2000 4000 NRC αw
50 0.35 1.00 0.90 0.45 0.20 0.15 0.70 0.25

66 0.45 1.00 0.90 0.50 0.25 0.10 0.70 0.25
Pink® Thermal Slab − silver reflective
75 0.50 1.00 0.90 0.50 0.25 0.10 0.70 0.25
100 0.85 1.00 0.85 0.50 0.25 0.10 0.70 0.25
Technical specification
When specifying, state the following: The insulation material shall be Fletcher Insulation Pink® Thermal Slab.
The insulation shall achieve a Material R-value of R________m2K/W (specify Material R-value) at a nominal thickness
of ________mm (specify insulation thickness) and an NRC of not less than ________ (refer to the Acoustic Performance section).
© Fletcher Insulation Pty Limited 2021. Fletcher Insulation reserves the right to change product specifications without prior notification. Information in this publication and
otherwise supplied to users as to the subject product is based on our general experience and is given in good faith, but because of the many particular factors which are outside
our knowledge and control and affect the use of products, no warranty is given or is to be implied with respect to either such information or the product itself, in particular the
suitability of the product for any particular purpose. The purchaser should independently determine the suitability of the product for the intended application. The colour PINK,
Pink® and Pink Batts® are registered trademarks of Owens Corning Intellectual Capital, LLC used under licence by Fletcher Insulation. FBS-1 Glasswool Bio-Soluble Insulation® is
a registered trademark of ICANZ. Unless otherwise stated all ™ and ® are trademarks and registered trademarks of Fletcher Insulation Pty Limited ABN 72 001 175 355.
CTDS3_Revision_3_Issue Date 04032021.

TDS Pink Thermal Slab Rev3

Uploaded by

Copyright:

Available Formats

TDS Pink Thermal Slab Rev3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TDS Pink Thermal Slab Rev3

Uploaded by

Copyright:

Available Formats

Technical data sheet

Pink® Thermal Slab

R1.5 50 1200 2400 5 14.40 941107

Thermal resistance R-value AS/NZS 4859.1 Complies m2K/W

Fire hazard properties

Property Test method/standard Result

Early Fire Hazard Indices

Health and safety

Sound absorption coefficients

50 0.35 1.00 0.90 0.45 0.20 0.15 0.70 0.25

You might also like