3/18/23, 7:07 PM ART Flow - Scaled Agile Framework

© 2023 Scaled Agile, Inc. All rights reserved.

https://scaledagileframework.com/art-flow/ 1/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework

“ If we need synchronized efforts… Then

the contribution of any single person to
the organization’s purpose is strongly
dependent upon the performance of
others.

—Eli Goldratt

ART Flow
ART Flow describes a state where an ART delivers a continuous flow of valuable features to the customer.

SAFe guides ARTs, working with their extended stakeholders, can get closer to their customers and build
Continuous Delivery Pipelines (CDPs) to accelerate the delivery of valuable products and services. This
guidance has proven highly effective in improving business outcomes for SAFe Enterprises.

But this type of digital transformation is complex, as any enterprise is complicated, and adopting a Lean-
Agile way of working is a significant change. Many individuals and teams have not worked in an Agile way
before, and impediments abound. In addition, there is no apparent limit to how effective an ART can be.
There is always an opportunity to improve the flow of value delivery. Indeed, because of the scope and
impact on customer value delivery, each ART may be the primary opportunity for improving business
outcomes via improving continuous flow.

Note: About the Flow Article Series

SAFe is a flow-based system. As such, any interruptions to flow must be identified and addressed
systematically to enable continuous value delivery. While flow-based guidance is embedded throughput
SAFe, a collection of six articles addresses impediments to flow. These are Value Stream Management,
Principle #6- Make value flow without interruptions, Team Flow, ART Flow, Solution Train Flow, and
Portfolio Flow. These articles define flow along with a set of ‘eight flow accelerators’ that teams can use
to address, optimize, and debug issues with achieving continuous flow. This article describes ART Flow.

Details
As highlighted in Principle 6 – Make value flow without interruptions, SAFe defines a set of eight flow
accelerators that can address, optimize, and debug issues to achieve a continuous flow of customer
value. This article describes how to accelerate the flow of value through Agile Release Trains by applying
the eight flow accelerators.

#1 Visualize and Limit WIP

Why it matters
https://scaledagileframework.com/art-flow/ 2/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework

Excessive Work In Progress (WIP) significantly decreases ART productivity and impedes value flow. It
overloads people and teams, confuses priorities, causes frequent context switching, and creates long
English
waits for new functionality.

An ART strives to do its best. However, it’s normal for an ART to have lots of work in process (WIP), often
far more than it can achieve over time. But that’s counterproductive, as an overloaded ART will complete
less work than it would otherwise.

What to do about it
Visualize all features in progress. An ART should manage the inventory of all the Features
currently in flight. These are maintained and WIP-limited in the ART Backlog Kanban system.
Establish control with capacity allocation. Not all of the ART’s work is expressed in features.
Therefore, an ART’s total WIP combines effort in current features and non-feature-related work:
infrastructure, tooling, change programs, team and customer meetings, training, and more. It’s
easy to underestimate the time devoted to these other essential activities. To address the total
WIP, establish capacity allocations for ART feature and other work and adjust over time.

#2 Address Bottlenecks
Why it matters

A bottleneck constrains the productivity of the entire ART, so teams must address them to improve flow.
Once the current bottleneck has been resolved, the next one materializes and must then be taken care of
to reach the next level of performance. It’s a continuous process.

What to do about it
Identify the bottleneck. An ART can only address known bottlenecks . Some ART bottlenecks can
be identified during PI Planning; others will only materialize during PI execution or Inspect and
Adapt. Typical symptoms of a bottleneck may include:
An overloaded individual team or a group of teams
Repeated slippage of an activity (such as integration, testing, deployment, refactoring) from
one iteration to another
Delayed execution of certain types of dependencies

SAFe metrics and tools like Value Stream Mapping, the planning board, and the ART Kanban system may
help identify bottlenecks.

Understand the full impact. An ART needs to understand how its current bottlenecks affect the
value flow. For example, slow customer feedback may lead to the ART building the wrong
solution functionality, significant rework, and dissatisfaction. A deteriorating system architecture
makes the development process significantly longer and less predictable.
Increase capacity at the bottleneck when possible. Once the problem has been identified and
understood, increasing capacity at the bottleneck is an obvious remedy. For example, an ART
that has an insufficient number of front-end developers may bring in more people. Or, in the
case of poor architecture, the ART may allocate more time for tech-debt reduction.
Bypassing the bottleneck. However, increasing capacity at the chokepoint can sometimes be
tricky as additional people and resources may not always be available. Near term, avoiding the
blockage may be more productive Selecting the next most valuable feature that does not have
https://scaledagileframework.com/art-flow/ 3/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework
blockage may be more productive. Selecting the next-most-valuable feature that does not have
dependencies is one way to do this. For example, instead of launching a large-scale architectural
improvement of a legacy system, an ART may choose to hasten the system’s retirement.

#3 Minimize Handoffs and Dependencies

Why it matters

A ‘handoff’ of information and assets occurs when a work product transitions from one process step to
another. And when situations require a specific person or unique input from another person or a team, a
dependency occurs. While some handoffs and dependencies are inevitable, excessive and unnecessary
dependencies and handoffs, impede flow.

What to do about it
Use the ART planning board to visualize dependencies. The ART planning board helps track
significant dependencies across teams and optimize execution throughout the PI. It is adjusted
as new facts emerge.
Foster incremental execution of dependencies. A significant handoff from one team to
another is fraught with uncertainty, rework, and delays. Instead, dependencies can often be
divided into smaller, more manageable items. This approach fosters frequent cross-team
integration, proactive discovery of issues and inconsistencies, and a more predictable and faster
process.
Synchronize frequently. The ART Sync provides an excellent venue to synchronize dependencies
and handoffs. Additionally, establishing direct communication across teams that have
dependencies helps sort out implementation details.
Optimize the structure of teams. Excessive dependencies and handoffs often suggest a poorly
structured ART. To reduce dependencies, build cross-functional, cross-disciplinary Agile Teams
and apply team topologies.
Visualize and manage dependencies with external parties. An ART may have internal and
external handoffs with other ARTs or organizations that should also be identified, tracked, and
handled.

#4 Get Faster Feedback

Why it matters

Solution development relies on the fast feedback that guides the ART in the right direction. Mistakes pile
up quickly when feedback is delayed or missing, leading to substantial rework for multiple teams, slow
delivery, and unsatisfied customers. Two types of feedback are typically required, as Figure 1 illustrates:

Is the ART creating the right thing for the Customer?

Is the ART building it right

DO

Building the right thing

✓
https://scaledagileframework.com/art-flow/
✓ 4/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework
✓
PLAN CHECK

Building it right

ADJUST
© Scaled Agile, Inc.

Figure 1. Building the right thing and building it right

What to do about it
Assure both types of feedback. Continuous customer engagement is the only way to ensure
that ART is building the right thing. In many situations, shortcuts to reaching the Customer may
be necessary. In addition, the ART must confirm that the technology is viable and that the
solution meets quality expectations. This testing should be continuous and address functional
and Nonfunctional Requirements (NFRs).
Provide solution telemetry. Application telemetry can capture valuable system usage and
behavior data. These application-specific and context-dependent measures require the planning
and execution of enablers.
Engage with customers early and often. At every opportunity, demonstrate the product to the
Customer. Test new trial versions of functionality to select customers whenever possible.
Integrate and test frequently. Integration is required within and across the train’s Agile Teams.
Supported by test automation, it provides the fastest and most productive way to ensure that
the implementation is progressing in the right direction.
Use research spikes and MVPs. Spikes and Minimum Viable Products are examples of
intentional, experimental design. They are valuable shortcuts to acquiring knowledge about the
Customer and the solution.

# 5 Work in Smaller Batches

Why it matters

Operating in large batches of work leads to information decay, delayed feedback, rework, and high
variability.

What to do about it
Understand the types and respective sizes of batches. There are multiple types in play —
planning, integration, testing, release, customer feedback, etc. Each must be understood and
sized to minimize the total sum of the transaction and holding cost.
Use cadence. ART cadence naturally constrains a few major batch types. Sticking to
recommended iteration and PI duration helps planning, integration, and customer feedback and
keeps batch size small.
Manage team and ART size. Applying the recommended size of Agile Teams and ARTs also
reduces batch sizes.
Automate a delivery pipeline. An effective Continuous Delivery Pipeline (CDP) reduces optimum
integration, test, and deployment batch size.
Plan for smaller batches. Explicitly planning for smaller batches can contribute to reducing
their size. For example, planning for specific, frequent releases may help keep the release batch
https://scaledagileframework.com/art-flow/ 5/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework
p p g p q y p p
in check.
Use thin vertical slices of work. Thin vertical slices of work can reduce most batch sizes. So do
smaller and more manageable features. Taking fewer features within each iteration also reduces
batch sizes.

#6 Reduce Queue Lengths

Why it matters

The ART backlog queue contains all the committed feature work awaiting service. The longer that queue,
the longer the wait for the new features to reach the Customer.

What to do about it
Keep roadmaps flexible. A fixed long-term roadmap is an example of a long queue. While some
milestones must be fixed, the roadmap should keep dates and the scope of work flexible
whenever possible. That enables the ART to respond to market changes and new learnings
during the implementation.
Establish a strong Product Management function. Often, queues occur because the
organization can’t say no and cannot prioritize work effectively. Product managers must exert
positive yet firm scope management leadership, demonstrated during PI Planning, the PI itself,
and Inspect & Adapt.
Leave capacity for emergent priorities. An ART can plan only for the work it knows about
ahead of planning . During execution, some areas will require further exploration or depend on
future market events. Other events are unforeseeable. As a precaution, allocate reserve capacity
so the teams can incorporate it into the plan when an event triggers new work.

#7 Optimize Time ‘In the Zone’

Why it matters

Solution development relies on creativity and the focused intellectual effort of team members. For
example, implementing a new software feature may require developers and teams to navigate hundreds
of dependencies between different systems. Cooperation requires a high degree of focus and many work
sessions. Optimizing the time spent in the zone — both for individuals and the team together — makes a
substantial difference in ART productivity.

What to do about it
Keep work-in-process low. Too much work-in-process (WIP) often results in context switching.
Fewer active items at any given time mean fewer work interruptions.
Frequently integrate work. Performing cross-team integration regularly resolves
inconsistencies and issues quickly. Otherwise, they pile up and cause teams with dependencies
to interrupt one another frequently and then have to revisit earlier work.
Maintain solution health. If teams don’t continuously address technical debt, they will spend
too much time chasing ambiguous dependencies and newly-created defects.
Ensure efficient events. Continually optimize all events for team productivity—especially PI
planning, systems demos, and I&A.

#8 Remediate Legacy Policies and Practices

https://scaledagileframework.com/art-flow/ 6/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework
#8 Remediate Legacy Policies and Practices
Why it matters

As described in the Team Flow article, legacy policies and practices present pernicious problems that
may occur during and even after a SAFe implementation. And it’s not just the teams that are affected.
Given that ARTs deliver the primary economic value of solutions and consume most of the R&D
investment, they are sure to get much attention from critical stakeholders. And unfortunately, some of
those stakeholders may not have participated in the Lean-Agile transformation, so they may unknowingly
contribute to a lack of flow.

What to watch for

The first step is to know that these impediments are likely to exist. The second is to recognize them when
they occur. Common impediments include:

Traditional project and program management (EVM, WBS, IMS, cost accounting) layered on top of
Agile teams
Quality systems and governance models containing embedded waterfall stage-gate milestones
Committed scope and hard deadlines that did not include input from the people who will do the
work
Redundant reporting and release meetings with overlapping agendas and attendees
Separating product design, architecture, and UX from the ARTs and value streams
‘Freezing’ assets to prevent needed changes that customers need
Slow and ineffective provisioning of required tooling and work environments
Verification & Validation and compliance activities and teams engaged only at the end

What to do about it

Once identified, teams must take corrective action. But the action depends on the impediment’s specific
stakeholders, nature, and context. Change agents often discover that many of these stakeholders have
not been on the transformation journey and require additional training and coaching. No change journey
is complete until the changes are fully embedded in the culture.

Measuring ART Flow

Measuring flow is critical to improving ART flow. SAFe’s Measure and Grow system provides three
measurement categories—competency, flow, and outcomes—that can assess and improve an
enterprise’s ability to deliver innovative business solutions quickly. This measurement system includes
six measures specific to flow: flow distribution, velocity, time, load, efficiency, and predictability.
Regarding ART flow, they are all relevant, but predictability, time, and load are particularly useful and
highlighted below.

ART Flow Predictability

Art Flow predictability measures how well a train can plan and meet its PI objectives. For a business to
plan and execute effectively, ARTs should generally satisfy most of the committed objectives and one or
more of the uncommitted. This approach typically results in an average of 80-100% of the total planned.
Figure 2 shows an example where the ART is taking a fairly conservative approach to its PI commitments,
https://scaledagileframework.com/art-flow/ 7/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework
gu e s o s a e a p e e e t e s ta g a a y co se at e app oac to ts co t e ts,
as the average predictability regularly runs above 100%. Scoring above 100% requires teams to complete
their committed and uncommitted objectives.

Figure 2. An example of ART flow predictability

ART Flow Time

ART flow time measures the total elapsed time to deliver new features. It’s typically calculated from
ideation to production. Figure 3 illustrates an example with a reasonably steady flow time average of
around 36 days. Outliers are common, as they may indicate features blocked due to outside
dependencies, unanticipated risks, or other common factors.

Flow Time Histogram

25

20
Feature Count

15

10

Average Flow Time: 36.4 days

5

0
5 10 15 20 25 30 35 40 45 50 65 70 75 80 85 90 95 100 105 110

Flow Time (days)

© Scaled Agile, Inc.

Figure 3. An example of one ART’s flow time

ART Flow Load

ART flow load measures the total amount of work in the system at any point. It is often derived as an
automated report based on the ART Kanban states, illustrated with an area chart, as shown in Figure 4.

220

200

180

160

140
Count

120

100

https://scaledagileframework.com/art-flow/ 8/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework
80

60

40

20

0
2021-05-12 2021-06-11 2021-07-13 2021-08-12 2021-09-13 2021-10-13 2021-11-12 2021-12-14 2022-01-13 2022-02-14 2021-03-16 2021-04-15

Unassigned Review Analyzing Ready Preparing Implementing

© Scaled Agile, Inc.

Figure 4. ART flow load example

This chart illustrates a dramatic increase in WIP for this ART. Additional insights into the ‘why’ would
require knowledge of that ART’s context. For example, the ART may indeed be overloaded with WIP, or
perhaps the size of the ART has increased dramatically, and the increase in WIP is simply a function of
size.

ART Flow Efficiency

Flow efficiency is the sum of the active time divided by the total time it takes to get the item through the
system. Flow efficiency can be very low in a system that has not been optimized, indicating that most of
the time the backlog item spends in the system is waiting for service from another activity. The starting
point to understanding flow efficiency is developing a value stream map and estimating (or gathering the
actual times) how long a backlog item spends in various process states.

An example is the value stream map in Figure 5 below, taken from an actual DevOps value stream
mapping exercise. It can be observed that this system is highly inefficient, with a total efficiency of 5%. It
can also be observed that almost all the waiting time occurs in front of one specific step. That step is the
bottleneck in the process, and working to increase the efficiency in other steps will not produce much
economic return. The ART must address the bottleneck to increase efficiency, and when that happens,
flow time should also decrease dramatically.

This flow Cumulative

New feature Feature PM
Design Code Test
idea definition Accepts
Process time 4 hrs. 4 hrs. 24 hrs. 24 hrs. 2 hrs. 7 days
Delay time Variable 4 hrs. 16 hrs. 16 hrs. 38 hrs. 10 days
Percent Complete and Accurate %C&A: 75% %C&A: 80% %C&A: 80% %C&A: 80% %C&A: 100% %C&A: 38%

Deploy to Smoke test QA + UAT

Staging
4 hrs. 4 hrs. 24 hrs. 4 days 11 days
696 hrs. 4 hrs. 16 hrs. 90 days 100 days
%C&A: 90% %C&A: 100% %C&A: 100% %C&A: 90% %C&A: 35%

Deploy to Production
Smoke test QA + UAT
Prod signoff
1 hr. 2 hrs. 4 hrs. 1 hr. 1 day 12 days
999 hrs. 2 hrs. 4 hrs. 1 hr 126 days 226 days
%C&A: 100% %C&A: 100% %C&A: 100% %C&A: 100% %C&A: 100% %C&A: 35%

5% time efficiency

© Scaled Agile, Inc.

Figure 5. An example of ART flow efficiency derived from a value stream mapping exercise

Flow Metrics Summary

SAFe’s Flow metrics will help highlight ART flow improvement opportunities However the numbers alone
https://scaledagileframework.com/art-flow/ 9/10
3/18/23, 7:07 PM ART Flow - Scaled Agile Framework
SAFe’s Flow metrics will help highlight ART flow improvement opportunities. However, the numbers alone
cannot tell the whole story. Qualitative analysis, along with good judgment, is needed.

Last Updated: 20 December 2022

he information on this page is © 2010-2023 Scaled Agile, Inc. and is protected by US and International copyrigh
ws. Neither images nor text can be copied from this site without the express written permission of the copyrig
older. Scaled Agile Framework and SAFe are registered trademarks of Scaled Agile, Inc. Please visit Permission
FAQs and contact us for permissions.

https://scaledagileframework.com/art-flow/ 10/10