Mitsubishi Catalogue VRF-21

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

S-series PUMY

OUTDOOR UNIT OUTDOOR UNIT


S-series

Y-series

Advantages of CITY MULTI


PUMY-CP VKM

Specifications
Model
Power source
PUMY-CP100VKM PUMY-CP125VKM
1-phase 220-230-240 V, 50 Hz; 1-phase 220 V, 60 Hz
PUMY-CP140VKM
PUCY/PUHY

Outdoor/Heat
Cooling capacity *1 kW 11.2 14.0 15.5
(Nominal) *1 BTU/h 38,200 47,800 52,900 These models are provided with
Power input kW 2.80 3.84 4.70
Current input A 12.99-12.42-11.90, 12.99 17.81-17.04-16.33, 17.81 21.80-20.85-19.98, 21.80 high-performance inverter compressors to

Outdoorsource
EER kW/kW 4.00 3.65 3.30
Temp. range of Indoor temp. W.B. 15 to 24°C (59 to 75°F)
achieve high energy-saving performance.
cooling Outdoor temp.
Indoor unit Total capacity
D.B. 10 to 52°C (50 to 126°F)
50 to 130% of outdoor unit capacity
A wide lineup of models with up to 60 HP
can be applied to various usage.

unit unit
connectable Model/ CITY MULTI
15–125/7 15–140/10 15–140/12
Quantity
Sound pressure level *2
dB <A> 52/- 53/- 54/-
(measured in anechoic room)
Refrigerant piping Liquid pipe mm (in.) 9.52 (3/8)
diameter Gas pipe mm (in.) 15.88 (5/8)
Fan Type x Quantity Propeller Fan × 1
Air flow rate m3/min 78.8
L/s 1,313
cfm 2,782
*3 Motor output kW 0.20 x 1
Compressor Type x Quantity Twin rotary hermetic compressor × 1
Starting method Inverter

Indoor unit
Motor output kW 2.2 2.7 3.0
External finish Galvanized Steel Sheet Munsell No. 3Y 7.8/1.1
External dimension H x W x D mm 981 × 1050 × 330 (+25)
in. 38-5/8 × 41-3/8 × 13 (+1)
Protection High pressure protection High pressure switch
devices Inverter circuit
Overcurrent detection, Overheat detection (Heat Sink thermistor)
(COMP./FAN)
Compressor Compressor thermistor, Overcurrent detection
Fan motor Overheating, Voltage protection
Refrigerant Type x original charge R410A 2.9kg
Net weight kg (lbs) 86 (190) *4
Heat exchanger Micro Slit Fin and Copper tube
Defrosting method ―
Optional parts Joint: CMY-Y62-G-E, Header: CMY-Y64/68-G-E

Remote Controller
Lossnay
Notes:
*1 Nominal conditions

Indoor Outdoor Pipe length Level difference

Precautions for use


27ºC DB/19ºC WB
Cooling 35ºC DB (95ºF DB) 7.5m (24-9/16ft.) 0m (0ft.)
(81ºF DB/66ºF WB)
The CITY MULTI Y-Series (for large applications) makes use of a two-pipe refrigerant system, and realizes
*2 Cooling mode/Heating mode
*3 External static option is available(30Pa/3.1mmH2O). enhanced cooling capacity at high outside air temperatures. The compact outdoor unit utilizes R410A refrigerant
*4 87 (192), for PUMY-CP100/125/140VKM.TH-BS. 88 (195), for PUMY-CP100/125/140YKM.TH-BS.
*Nominal conditions *1 are subject to ISO 15042.
*Due to continuing improvement, above specification may be subject to change without notice.
and an INVERTER-driven compressor to use energy effectively. The CITY MULTI Series can be configured for all
*This unit cannot be connected with the PFFY-YM-E or PFFY-YMH-E.
applications. Up to 50 (Y-Series) indoor units can be connected with up to 130% connected capacity to maximize
engineering design options. This feature allows easy air conditioning in each area with convenient individual
controllers.

39 40

You might also like