smart wristband

user's manual
Wear it properly
The wristband is best worn after the ulnar styloid
Adjust the size of the wrist according to the adjustment
hole；Buckle belt buckle。
The sensor should be close to the skin to avoid moving。

Charge the bracelet

For the first time, make sure that the battery is in
normal power. If the power is not turned on normally,
please connect the charger to charge the device, and
the bracelet will automatically turn on.

Install the bracelet app on your phone

Scan the QR code or go to the App Store, app download
and install the app

Android/IOS
System Requirements ： Android 5.0 or above; iOS9.0 or

above;Support for Bluetooth 4.0.

Device connection
For the first use, you need to connect to the APP for calibration.

After the connection is successful, the bracelet will

automatically synchronize the time

Turn on the Bluetooth switch of the mobile phone system →

enter the app device module settings → click "bind device,

experience more functions" to enter, it will automatically

search for the nearby Bluetooth device, find the bracelet

device and connect it.

 After the pairing is successful, the APP will automatically

save the Bluetooth address of the bracelet.When the APP is

opened or running in the background, it will automatically

search and connect the bracelet;

 Android phones use all notification permissions such as

contact information and mobile app settings to run in the

background

Bracelet function description

 When the device is turned off, touch and hold the function

button for more than 3 seconds to turn the device on

More menu-long press the shutdown menu to enter the shutdown
interface
 Under the power on state, touch the short press function key

to light up the screen

 When the device is turned on, touch the function key to light

the screen;

 Whether the default clock page of the bracelet, you can

enter more menus to set different clock pages, no operation

default five-second screen

 Switch to the heart rate three-in-one interface to start the

test, heart rate three-in-one interface 60s timeout

automatically off screen (heart rate and blood pressure need

bracelet hardware support)

Clock interface
After syncing with the phone, the bracelet will automatically

calibrate the time.；

（ tracks Step）

Number of steps

Wear the bracelet and record the number of daily movement steps

to view the current real-time steps.

Distance

The distance of motion is estimated based on the number of

walking steps.
Calorie

Estimate the calories burned based on the number of walking

steps

Heart rate, blood pressure, blood oxygen three-in-one

After entering the heart rate three-in-one test interface for

a few seconds, the current heart rate, blood pressure, and blood

oxygen test results are displayed. This feature requires a

wristband to support heart rate and blood pressure sensors

Multi-sport mode

After all exercise modes are activated, calories consumed and duration

can be recorded;

Sleep mode

When you fall asleep, the bracelet will automatically enter the sleep

monitoring mode; it will automatically detect the number of deep

sleep/light sleep/waking up throughout the night and calculate your

sleep quality; the sleep data bracelet will only view the total duration of

deep sleep and light sleep. For details, please View on the APP side.

Note: Sleep data will only be available when you wear the bracelet when

you fall asleep. Sleep will be detected from 10 o'clock in the evening.

Sleep data for 3/4 hours of falling asleep can be synchronized to the app

while you sleep.

music player
Successfully connected to the APP, the band can start the music player

(play/pause/up and down song function control)

the weather

If the APP is successfully connected, the bracelet can obtain the current

weather data, and the APP setting-personal information-can set the

temperature unit switch (the conversion between Celsius and

Fahrenheit)

Note: When connecting to the APP, please be sure to turn on the phone

location function

Custom watch face

You need to connect to the APP to get the dial settings, you can choose

the recommended dial/photo album custom dial to synchronize to the

bracelet

Temperature measurement

Please wear it for 15 minutes every time you use it to perform

temperature measurement, connect the APP to convert the unit,

and view the temperature data (the data is not uploaded without

APP or Bluetooth disconnection).

Note: The temperature measurement results vary according to the

ambient temperature, and the data is for reference only.

Information mode

When the bracelet pushes multiple reminder messages, enter this

interface to view the latest message record

APP function and settings

（Personal information)

Please set your personal information after entering

the app.

Settings → Personal Information, you can set gender

- age - height - weight

You can also set your daily goal steps to monitor daily

completions

（Application push）

incoming call:

In the connected state, if the call alert function is enabled,

when the call comes in, the wristband will vibrate and display

the name or number of the caller.(You need to give APP read

address book permission)

SMS notification:
In the connected state, if the SMS reminder function is

enabled, the bracelet will vibrate when there is a text

message.
Other reminders:

In the connected state, if this function is enabled, when

there is a message such as WeChat, QQ, Facebook, etc., the

bracelet will vibrate to remind and display the content

received by the app.(You need to give the APP permission

to get system notifications. The wristband can display

20-40 words).

Other functions:：

Turn on vibration to set this function,When there is a call,

message or other reminder, the bracelet will vibrate. If it is

closed, the bracelet will only have a screen reminder without

shaking to avoid disturbing.

Tips for Android users:

When using the reminder function, you need to set it

to allow "FitPro" to run in the background; it is

recommended to add "FitPro" to the rights management

and open all permissions.

（Alarm setting）

In the connected state, 8 alarms can be set. After setting,

it will be synchronized to the bracelet; offline alarm is

supported. After the synchronization is successful, even if

the APP is not connected, the bracelet will be reminded

according to the set time.

（Looking for a bracelet）

In the connected state, click the “Look for the bracelet”

option and the bracelet will vibrate.

(Remote photography)

In the connected state, the app end enters the remote camera

interface, shakes the wristband/turns the wrist, and

automatically takes a photo after 3 seconds of counting down.

Please allow the APP to access the album to save the

self-portrait photos. (Note: When taking a remote control photo,

the bracelet can not operate other functions, the app should

exit the camera function)

(Sedentary reminder)
Set whether to enable the sedentary reminder function, you

can set the reminder interval, if you sit for a long time

in the set time, the bracelet will remind.

(Raise your hand to brighten)

Turn this function on. When the wristband is in the state

of the screen, lift your wrist and turn the screen to

yourself to light up the screen.

 (Do not disturb mode)
Turn on the Do Not Disturb mode. You can set the Do not

disturb time period. During the set time period, the

bracelet stops receiving notification messages to avoid

reminding messages.

(Device reset)
Setting this feature reset will erase all data in the

bracelet (such as step counting)

(Remove device)
Remove device This feature will erase data and remove

device

Basic parameters
Type of battery
Equipment type smart Lithium polymer

wristband

Vibration motor support method of Bluetooth4.0

synchronization
Low power
Operating -10℃~50℃ sensor accelerometer

temperature

System iOS9.0 and above/Android 5.0 and above

Requirements

Precautions
1.Bathing and swimming should not be worn.

2.Please Connect the bracelet when synchronizing data.

3.Use the included charging cable to charge.

4.Do not expose the bracelet to high moisture, high temperature,

or very low temperatures for long periods of time

5.The bracelet appears to crash and restart. Please Check

the phone memory information clear and try again, or exit

the APP and reopen it.

Component introduction
*Host *Wrist strap *Charging cable *Packing box and

instructions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.