Important Safety Instruction:

Before using HD Plus Video Capture, please ensure that you read and understand the
safety precautions below:

1. Do not attempt to open the case of HD Plus Video Capture or modify it in any way
as this will void the warranty.

2. Keep HD Plus Video Capture away from water and other liquids as this may cause
the unit to malfunction.

3. HD Plus Video Capture may become warm during use. This does not indicate malfunction.

4. Do not place heavy objects on HD Plus Video Capture as this may cause the unit to
overheat and malfunction.

5. If the exterior of HD Plus Video Capture requires cleaning, wipe it with a soft dry cloth.

6. Do not dispose of the unit via conventional domestic waste.

Glossary:
OSD: On Screen Display
.
OBS: Open Broadcaster Software is a free and open source software for video recording and
live streaming.
XSplit : A simple yet powerful live streaming and recording software.

1
 Table of Contents
Important Safety Instruction ................................................................ ………… 1
Table of Contents ................................................................................................ 2
What’s included .................................................................................................. 3
Product Components ........................................................................................ 4-5
Connection instruction and installations (Standalone Mode)
1. Installation .............................................................................................. 6
2. Set up Menu .............................................................................................. 6
3. Record/Capture to USB or SD card ............................................................. 7
4. Playback .................................................................................................... 8
PC Mode
1. Installation/Capture and record to PC ....................................................... 9
2. Live Streaming via XSplit .......................................................................... 10
3. Live Streaming via OBS ....................................................................... 11-12
Schedule recording ............................................................................................ 12
Firmware upgrade & Product specification ....................................................... 13
Trouble shooting and Contact …………………………………………………………………………….. 14

2
What's included:

a. HD Plus Video Capture

b. HDMI Cable

c. AV Cable

d. Power Adaptor

e. USB Power Cable

f. Remote Control

g. User Manual
 Product Components:

HD+ Video Capture

1. IR Receiver: Receives Infra-Red signals from Remote Control

2. LED indicators: When the Red light is on, it means is turned on.
Blue blinking means it is recording videos.
3. Panel Buttons:
Power: During power on state, press shorter than 2 seconds to turn on/off LCD screen,
press longer than 2 seconds but shorter than 10 seconds to show shutdown
dialog, press longer than 10 seconds to force shutdown. During power off state,
press longer than 2 seconds to turn on.
Menu/Back: Press this button to enter or exit menus.
Vol+/-,Mic+/-: Press these buttons to control Speaker/Microphone volumes.
Mode: Press this button to switch among Record/Photo/Playback preview. Long press
to delete a recording in playback preview.
Rec/Stop: Short press to start/stop recording in record preview state. Long press to
capture a photo in photo preview state.
4. SD card slot: Insert SD card for record or playback.
5. DC input 5V/2A: DC jack for USB power adaptor
6. Earphone: Earphone output with Microphone input interface.
7. AV IN: earphone jack for CVBS video + L/R Audio input.
8. HDMI IN: HDMI input
9. HDMI OUT: HDMI output.
10. USB: for plug into an external USB storage device.
11. USB TO PC: micro USB for connecting to PC. works as an USB storage of PC or
streams video to PC.
12. LCD Screen: LCD screen for preview/playback.
4
Remote Control:

5
Connection Instruction and installation (Standalone Mode)
1. Installation

(1) Connect power adapter to DC jack ○

5 of recorder.
(2) Connect video source (PS, XBox, Blu-ray player,etc ) to recorder by
HDMI in ○
8 or AV in ○
7

(3) Connect recorder from HDMI OUT ○

9 to TV with HDMI cable.

(4) Plug the USB storage device into the USB ○

10 or insert SD card to ○
4

of recorder.

2. Set up Menu

Press Menu button to browse the menu setting as below.

6
Language: Set the OSD language to be displayed on the menu. English, French, Germany,
Italy, Japanese, Russian, Poland, Simplified Chinese and Traditional Chinese are available.
System Date/Time Setting: Set the time of recorder by year, month, day, hour and minute.
Time Watermark: Set the time watermark on screen and recording.
Video Quality: Set the video record quality: 1080p60 High/Middle/Low, 720p60, 480p60
are available. The corresponding video bitrate are 30/22/18/12/4Mbps.
Video Source: Select the source input to HDMI or AV.
USB Mode: Select the USB Host mode (USB Storage Mode, record/playback the USB disk
or USB HDD) or USB Device Mode (PC Storage Mode, PC Steaming Mode, see PC Mode
for details).
Default Storage device: Select the default storage device to SD card or USB disk. It will set
to the other one if this default storage is not available.
Schedule Recording: Allow you to setup 3 different types of schedules: Daily, Once, Weekly
recording.
Restore factory settings: Restore the factory settings.
Formatting: Format the inserted SD card or USB disk.
Firmware version: Shows the current version info.

3. Record/Capture to USB or SD card

(1) After finishing the setup, press the Menu button to return to the preview interface.
Then recorder will record videos automatically during the scheduled time period or record
by yourself manually.

(2) After all devices are connected properly, please switch on the power of recorder
Insert a video disc into the drive of the input device and play the video.

(3) Insert the SD card or connect USB storage to recorder

(4) Press the Rec/Stop button on recorder or press the Rec button on the record control
to start recording.

(5) Press the Rec/Stop button again on recorder or press he Stop button on the remote
control to stop recording.

NOTE:
It will automatically generate the file name when recording starts, the name rule is date
+ index.mp4.
recorder supports FAT32 format only. In FAT32, it will record a new file when the previous
recording file reaches the maximum 4GB capacity.
When HDD or USB storage is full, recorder will stop recording automatically.
recorder saves files in MPEG4 format. The capture resolution can be set at either 480p,720p
 or 1080p. Please note that not all games/video files are produced at 1080p.

4. Playback
(1) After all devices are connected properly, press the Playback button on the remote
control to enter the playback preview menu.

(2) You will see the status bar showing the file list with current/total index. Select your
desired file and press OK to start playback.

(3) You will see the progress bar on the bottom, and you can press ▲▼ to adjust the
output volume, or ◄► to Fast forward/rewind.

8
PC Mode:
1. Installation
Connect the micro USB cable between the USB TO PC port of recorder and the USB
port of PC, the menu below will pop up. Or you can manually open it after USB
cable connected.

(1) USB Storage Mode, record/playback video on USB Flash Drive / USB HDD
(2) PC Storage Mode, PC can detect SD card in recorder & access files on SD card
(3) PC St eamingMode recorder can stream video from input sourceto PC instantly.
With in streaming software like OBS/XSplit, PC can live stream to twitch/YouTube/facebook..etc.

Note:
The PC Mode requires high performance computer used in this case, otherwise you
may see “WARNING：High encoding CPU usage! Consider turning down settings.”

9
2. Live Streaming via XSplit

(1) Download & install & run the XSplit on your PC.
(2) Sources (or Add) Webcam, capture card, video devices recorder UVC Camera
.

(3) Settings --> Audio Input --> recorder UAC Audio.

10
3. Live Streaming via OBS
(1) Download & install & run the OBS on your PC.

(2) Scenes Add Scene Please enter a name. Sources Add Video Capture
Device Device Selection, select recorder UVC Camera, recorder UAC. Audio

11
(3) Settings Audio Desktop Audio Device your local speaker.

Click “Preview Stream” to preview, ”Start Recording” to record to PC.

Schedule Recording
The user can schedule a recording by press Schedule on remote or choose from menu
Schedule Recording.

On above menus, recorder allows you to setup 3 different types of schedules:

Daily, Once, Weekly recording.
Start Time/End Time:set the desired time of start/stop recording.
Week checkmarks: set the desired week days of schedule.
Confirmation: Click to save the schedule settings.
Cancel: Click to exit without saving the schedule settings.

Note:
If the schedule saved successfully, an alarm icon will show on the status bar.
The schedule recording works only on preview screen with power on.
When reached the scheduled time, the recorder will record videos automatically during the
scheduled time period.
The recording will be saved to current available storage device.
recorder supports FAT32 format only, so it will record a new file when the previous
recording file reaches the maximum 4GB capacity.
12
Firmware Upgrade:
(1) Save new firmware img.fex into a FAT32 formatted SD card, then plug into recorder.
(2) Turn on recorder, the new firmware dialog pops up, select Confirmation to start the
upgrade process.
(3) It will show the progress of upgrading, DO NOT unplug the SD card till it finished.

(4) After the upgrade completed, it will delete the file to avoid upgrade again and
reboot automatically.

Product Specifications
Supported Resolutions
1920x1080 (60p)
1920x1080 (50p)
1920x1080 (30p)
1920x1080 (25p)
1920x1080 (24p)
Input 1920x1080 (50i)
1920x1080 (60i)
1280x720 (60p)
1280x720 (50p)
720x480 (60i/p)
720x576 (50i/p)

Output 1280x720 (60p) for playback / Loop-through up to 1920x1080

Local Recording:
1920x1080 (60p). 1280x720 (60p). 720x480 (60p).
Recording PC Recording:
1920x1080 (30p). 1280x720 (60p).
Output format MP4 (H.264)
CVBS standards (input) NTSC, PAL
Input signals HDMI, AV, MIC, USB
Output signals HDMI, Micro USB, Earphone, Speaker
Supported file system FAT32, FAT
Recording capacity Maximum 4GB per file
Recording Bitrate Max: 30Mbps
Maximum storage capacity 2TB (HDD), 32GB (USB Flash drive), 128GB (SD card)
Power supply DC 5V, 2A

13
7. Trouble Shooting
(1) The device doesn’t show video on LCD screen.
Please make sure the HDMI or AV source input is connected & selected properly.

(2) The device doesn’t show video to HDMI TV.

Please make sure the HDMI out and TV are connected properly.
Please make sure the proper video source input is selected.

(3) The device is not recording.

Please make sure the proper source input is selected.
Please make sure the storage device USB disk or SD card inserted.

(4) There is no sound in Speaker or Earphone or recording.

Please make sure the volume is unmuted.
Please make sure speaker volume is properly adjusted.

(5) There is no microphone sound in recording.

Please make sure you inserted the Earphone which has microphone input.
Please make sure the volume is unmuted.
Please make sure microphone volume is properly adjusted.

(6) There is no file preview in playback interface.

Please make sure there are recordings in the inserted USB disk or SD card.
If you copy the external files to the inserted USB disk or SD card, videos should be saved
in video folder, pictures should be save in photo folder.

(7) There is no PC Storage device on PC.

Please make sure you inserted a valid SD card into this device.
Please make sure you connected this device’s USB TO PC port and PC with micro USB
cable. Make sure you chose this device’s USB Mode to PC Storage Mode.

(8) There is no Live stream on PC.

Please make sure you connected this device’s USB TO PC port and PC with micro USB
cable.
Please make sure you chose this device’s USB Mode to PC Streaming Mode.
Please make sure you can see recorder UVC Camera, recorder UAC Audio device in your PC
Device Manager interface.
Please make sure you selected recorder as Video/Audio input in your software.

14