BUDDHA DEGREE COLLEGE(BDC)

DEPARTMENT OF BCA

Subject Name: Web Development Tools and Techniques

Subject Code: BCA(602)
 PHP

Table of Contents
About the Tutorial....................................................................................................................................... i
Audience .................................................................................................................................................... i
Prerequisites............................................................................................................................................... i
Copyright & Disclaimer ................................................................................................................................ i
Table of Contents ....................................................................................................................................... ii

PART 1: LEARNING PHP.................................................................................................................... 1

PHP ─ Introduction .................................................................................................................................... 2

Common Uses of PHP ................................................................................................................................. 2
Characteristics of PHP ................................................................................................................................ 3
"Hello World" Script in PHP ........................................................................................................................ 3

PHP ─ Environment Setup .......................................................................................................................... 4

PHP Parser Installation ............................................................................................................................... 4
PHP Installation on Linux or Unix with Apache ............................................................................................ 4
PHP Installation on Mac OS X with Apache.................................................................................................. 6
PHP Installation on Windows NT/2000/XP with IIS ...................................................................................... 7
PHP Installation on Windows NT/2000/XP with Apache .............................................................................. 8
Apache Configuration for PHP .................................................................................................................. 10
PHP.INI file Configuration ......................................................................................................................... 11

PHP ─ Syntax Overview............................................................................................................................ 15

Escaping to PHP ....................................................................................................................................... 15
Commenting PHP Code ............................................................................................................................ 16
PHP is whitespace insensitive ................................................................................................................... 16
PHP is case sensitive................................................................................................................................. 17
Statements are expressions terminated by semicolons ............................................................................. 17
Expressions are combinations of tokens.................................................................................................... 17
Braces make blocks .................................................................................................................................. 17
Running PHP Script from Command Prompt ............................................................................................. 18

PHP ─ Variable Types ............................................................................................................................... 19

Integers ................................................................................................................................................... 20
Doubles ................................................................................................................................................... 20
Boolean ................................................................................................................................................... 20
NULL........................................................................................................................................................ 21
Strings ..................................................................................................................................................... 21
Variable Naming ...................................................................................................................................... 24
PHP – Variables ........................................................................................................................................ 24
PHP Local Variables .................................................................................................................................. 24
PHP Function Parameters ......................................................................................................................... 25
PHP Global Variables ................................................................................................................................ 25
PHP Static Variables ................................................................................................................................. 26

PHP ─ Constants....................................................................................................................................... 27

PHP ─ Operator Types ............................................................................................................................. 29

Arithmetic Operators ............................................................................................................................... 29

ii
 PHP

Comparison Operators ............................................................................................................................. 31

Logical Operators ..................................................................................................................................... 33
Assignment Operators.............................................................................................................................. 35
Conditional Operator ............................................................................................................................... 37
Operators Categories ............................................................................................................................... 38
Precedence of PHP Operators................................................................................................................... 38

PHP ─ Decision Making ............................................................................................................................ 40

The If...Else Statement ............................................................................................................................. 40
The ElseIf Statement ................................................................................................................................ 41
The Switch Statement .............................................................................................................................. 42

PHP ─ Loop Types .................................................................................................................................... 45

The for loop statement............................................................................................................................. 45
The while loop statement......................................................................................................................... 46
The do...while loop statement .................................................................................................................. 47
The foreach loop statement ..................................................................................................................... 48
The break statement ................................................................................................................................ 48
The continue statement ........................................................................................................................... 50

PHP ─ Arrays............................................................................................................................................ 52
Numeric Array ......................................................................................................................................... 52
Associative Arrays .................................................................................................................................... 53
Multidimensional Arrays .......................................................................................................................... 54

PHP ─ Strings ........................................................................................................................................... 57

String Concatenation Operator ................................................................................................................. 58
Using the strlen() function ........................................................................................................................ 58
Using the strpos() function ....................................................................................................................... 59

PHP ─ Web Concepts ............................................................................................................................... 60

Identifying Browser & Platform................................................................................................................. 60
Display Images Randomly ......................................................................................................................... 61
Using HTML Forms ................................................................................................................................... 62
Browser Redirection................................................................................................................................. 63
Displaying "File Download" Dialog Box...................................................................................................... 64

PHP ─ GET and POST Methods ................................................................................................................ 66

The GET Method ...................................................................................................................................... 66
The POST Method .................................................................................................................................... 67
The $_REQUEST variable .......................................................................................................................... 68

PHp ─ File Inclusion ................................................................................................................................. 70

The include() Function.............................................................................................................................. 70
The require() Function.............................................................................................................................. 71

PHP ─ Files & I/O..................................................................................................................................... 72

Opening and Closing Files ......................................................................................................................... 72
Reading a file ........................................................................................................................................... 73
Writing a File............................................................................................................................................ 74

PHP ─ Functions ....................................................................................................................................... 76

Creating PHP Function.............................................................................................................................. 76
PHP Functions with Parameters ................................................................................................................ 77
Passing Arguments by Reference .............................................................................................................. 77

iii
 PHP

PHP Functions returning value .................................................................................................................. 78

Setting Default Values for Function Parameters ........................................................................................ 79
Dynamic Function Calls ............................................................................................................................ 80

PHP ─ Cookies.......................................................................................................................................... 81
The Anatomy of a Cookie ......................................................................................................................... 81
Setting Cookies with PHP.......................................................................................................................... 82
Accessing Cookies with PHP...................................................................................................................... 83
Deleting Cookie with PHP ......................................................................................................................... 84

PHP ─ Sessions......................................................................................................................................... 85
Starting a PHP Session .............................................................................................................................. 85
Destroying a PHP Session ......................................................................................................................... 87
Turning on Auto Session ........................................................................................................................... 87
Sessions without cookies .......................................................................................................................... 87

PHP ─ Sending Emails .............................................................................................................................. 89

Sending plain text email ........................................................................................................................... 89
Sending HTML email................................................................................................................................. 91
Sending attachments with email ............................................................................................................... 92

PHP ─ File Uploading............................................................................................................................... 95

Creating an Upload Form.......................................................................................................................... 95
Creating an upload script.......................................................................................................................... 96

PHP ─ Coding Standard ............................................................................................................................ 98

PART 2: ADVANCED PHP .............................................................................................................. 101

PHP ─ Predefined Variables ................................................................................................................... 102

PHP Superglobals ................................................................................................................................... 102
Server variables: $_SERVER .................................................................................................................... 103

PHP ─ Regular Expression ...................................................................................................................... 106

POSIX Regular Expressions...................................................................................................................... 106
PHP's Regexp POSIX Functions................................................................................................................ 108
PHP ─ Function ereg()............................................................................................................................. 108
PHP ─ Function ereg_replace()................................................................................................................ 110
PHP ─ Function eregi() ............................................................................................................................ 111
PHP ─ Function eregi_replace() ............................................................................................................... 112
PHP ─ Function split() ............................................................................................................................. 113
PHP ─ Function spliti() ............................................................................................................................ 114
PHP ─ Function sql_regcase() .................................................................................................................. 115
PERL Style Regular Expressions ............................................................................................................... 115
PHP's Regexp PERL Compatible Functions ............................................................................................... 117
PHP ─ Function preg_match() ................................................................................................................. 117
PHP ─ Function preg_match_all() ............................................................................................................ 118
PHP ─ Function preg_replace()................................................................................................................ 119
PHP ─ Function preg_split() .................................................................................................................... 120
PHP ─ Function preg_grep() .................................................................................................................... 121
PHP ─ Function preg_quote() .................................................................................................................. 122

PHP ─ Error and Exception Handling ..................................................................................................... 124

Using die() function ................................................................................................................................ 124

iv
 PHP

Defining Custom Error Handling Function ............................................................................................... 124

Exceptions Handling ............................................................................................................................... 127

PHP ─ Bugs Debugging ........................................................................................................................... 129

PHP ─ Date and Time ............................................................................................................................ 131

Getting the Time Stamp with time()........................................................................................................ 131
Converting a Time Stamp with getdate() ................................................................................................. 131
Converting a Time Stamp with date() ...................................................................................................... 133

PHP ─ PHP and MySQL .......................................................................................................................... 136

What you should already have?.............................................................................................................. 136
Connecting to MySQL Database .............................................................................................................. 137
Create MySQL Database Using PHP......................................................................................................... 138
Delete MySQL Database Using PHP......................................................................................................... 143
Insert Data to MySQL Database .............................................................................................................. 144
Retrieving Data from MySQL Database ................................................................................................... 148
Using Paging through PHP ...................................................................................................................... 152
Updating Data into MySQL Database ...................................................................................................... 154
Deleting Data from MySQL Database ...................................................................................................... 157
Using PHP to Backup MySQL Database.................................................................................................... 159

PHP ─ PHP and AJAX ............................................................................................................................. 162

What is AJAX ? ....................................................................................................................................... 162
PHP and AJAX Example........................................................................................................................... 162
Client Side HTML file .............................................................................................................................. 163
Server Side PHP file ................................................................................................................................ 165

PHP ─ PHP and XML .............................................................................................................................. 167

HTML list that's not valid XML................................................................................................................. 167
HTML list that is valid XML...................................................................................................................... 167
Parsing an XML Document...................................................................................................................... 167
Generating an XML Document................................................................................................................ 169

PHP ─ Object Oriented Programming .................................................................................................... 170

Object Oriented Concepts ...................................................................................................................... 170
Defining PHP Classes .............................................................................................................................. 171
Creating Objects in PHP .......................................................................................................................... 172
Calling Member Functions ...................................................................................................................... 172
Constructor Functions ............................................................................................................................ 173
Destructor ............................................................................................................................................. 174
Inheritance ............................................................................................................................................ 174
Function Overriding................................................................................................................................ 175
Public Members ..................................................................................................................................... 175
Private members.................................................................................................................................... 175
Protected members ............................................................................................................................... 176
Interfaces .............................................................................................................................................. 177
Constants .............................................................................................................................................. 177
Abstract Classes ..................................................................................................................................... 177
Static Keyword ....................................................................................................................................... 178
Final Keyword ........................................................................................................................................ 178

PHP ─ PHP for C Developers .................................................................................................................. 181

Similarities ............................................................................................................................................. 181
Differences ............................................................................................................................................ 181

v
 PHP

PHP ─ PHP for PERL Developers ............................................................................................................ 183

Similarities ............................................................................................................................................. 183
Differences ............................................................................................................................................ 183

PART 3: FUNCTION REFERENCE................................................................................................... 185

PHP ─ Function Reference ..................................................................................................................... 186

vi
 PHP

Part 1: Learning PHP

7
 PHP
PHP ─ INTRODUCTION

PHP started out as a small open source project that evolved as more and more people found
out how useful it was. Rasmus Lerdorf unleashed the first version of PHP way back in 1994.

 PHP is a recursive acronym for "PHP: Hypertext Preprocessor".

 PHP is a server side scripting language that is embedded in HTML. It is used to manage
dynamic content, databases, session tracking, even build entire e-commerce sites.

 It is integrated with a number of popular databases, including MySQL, PostgreSQL,

Oracle, Sybase, Informix, and Microsoft SQL Server.

 PHP is pleasingly zippy in its execution, especially when compiled as an Apache module
on the Unix side. The MySQL server, once started, executes even very complex queries
with huge result sets in record-setting time.

 PHP supports a large number of major protocols such as POP3, IMAP, and LDAP. PHP4
added support for Java and distributed object architectures (COM and CORBA), making
n-tier development a possibility for the first time.

 PHP is forgiving: PHP language tries to be as forgiving as possible.

 PHP Syntax is C-Like.

Common Uses of PHP

PHP performs system functions, i.e. from files on a system it can create, open, read, write,
and close them. The other uses of PHP are:

 PHP can handle forms, i.e. gather data from files, save data to a file, thru email you
can send data, return data to the user.

 You add, delete, modify elements within your database thru PHP.

 Access cookies variables and set cookies.

 Using PHP, you can restrict users to access some pages of your website.

 It can encrypt data.



8
 PHP


Characteristics of PHP
Five important characteristics make PHP's practical nature possible:

 Simplicity

 Efficiency

 Security

 Flexibility

 Familiarity

"He lo World" Script in PHP

To get a feel of PHP, first start with simple PHP scripts. Since "Hello, World!" is an essential
example, first we will create a friendly little "Hello, World!" script.

As mentioned earlier, PHP is embedded in HTML. That means that in amongst your normal
HTML (or XHTML if you're cutting-edge) you'll have PHP statements like this:

<html>
<head>
<title>Hello World</title>
<body>
<?php echo "Hello, World!";?>
</body>
</html>

It will produce the following result:

Hello, World!

If you examine the HTML output of the above example, you'll notice that the PHP code is not
present in the file sent from the server to your Web browser. All of the PHP present in the
Web page is processed and stripped from the page; the only thing returned to the client from
the Web server is pure HTML output.

All PHP code must be included inside one of the three special markup tags ate are recognized
by the PHP Parser.

<?php PHP code goes here ?>

<? PHP code goes here ?>

<script language="php"> PHP code goes here </script>

Most common tag is the <?php...?> and we will also use the same tag in our tutorial.

9
 PHP

From the next chapter, we will start with PHP Environment Setup on your machine and then
we will dig out almost all concepts related to PHP to make you comfortable with the PHP
language.

10
 PHP
PHP ─ ENVIRONMENT SETUP

In order to develop and run PHP Web pages, three vital components need to be installed on
your computer system.

Web Server - PHP will work with virtually all Web Server software, including Microsoft's
Internet Information Server (IIS) but then most often used is freely available Apache Server.
Download Apache for free here: http://httpd.apache.org/download.cgi

Database - PHP will work with virtually all database software, including Oracle and Sybase
but most commonly used is freely available MySQL database. Download MySQL for free here:
http://www.mysql.com/downloads/index.html

PHP Parser - In order to process PHP script instructions, a parser must be installed to
generate HTML output that can be sent to the Web Browser. This tutorial will guide you how
to install PHP parser on your computer.

PHP Parser Insta lation

Before you proceed, it is important to make sure that you have a proper environment setup
on your machine to develop your web programs using PHP.

Type the following address into your browser's address box.

http://127.0.0.1/info.php

If this displays a page showing your PHP installation related information, then it means you
have PHP and Webserver installed properly. Otherwise you have to follow given procedure to
install PHP on your computer.

This section will guide you to install and configure PHP over the following four platforms:
 PHP Installation on Linux or Unix with Apache

 PHP Installation on Mac OS X with Apache

 PHP Installation on Windows NT/2000/XP with IIS

 PHP Installation on Windows NT/2000/XP with Apache

PHP Insta lation on Linux or Unix withApache

If you plan to install PHP on Linux or any other variant of Unix, then here is the list of
prerequisites:

11
 PHP

 The PHP source distribution http://www.php.net/downloads.php

The latest Apache source distribution
http://httpd.apache.org/download.cgi

 A working PHP-supported database, if you plan to use one ( For example MySQL,
Oracle etc. )

 Any other supported software to which PHP must connect (mail server, BCMath
package, JDK, and so forth)

 An ANSI C compiler

 Gnu make utility - you can freely download it at

http://www.gnu.org/software/make

Now here are the steps to install Apache and PHP5 on your Linux or Unix machine. If your
PHP or Apache versions are different, then please take care accordingly.

 If you haven't already done so, unzip and untar your Apache source distribution. Unless
you have a reason to do otherwise, /usr/local is the standard place.

gunzip -c apache_1.3.x.tar.gz
tar -xvf apache_1.3.x.tar

 Build the apache Server as follows

cd apache_1.3.x
./configure --prefix=/usr/local/apache --enable-so
make
make install

 Unzip and untar your PHP source distribution. Unless you have a reason to do
otherwise, /usr/local is the standard place.

gunzip -c php-5.x.tar.gz
tar -xvf php-5.x.tar
cd php-5.x

 Configure and Build your PHP, assuming you are using MySQL database.

./configure --with-apxs=/usr/sbin/apxs \
--with-mysql=/usr/bin/mysql
make
make install

 Install the php.ini file. Edit this file to get configuration directives:

cd ../../php-5.x
cp php.ini-dist /usr/local/lib/php.ini

12
 PHP

 Tell your Apache server where you want to serve files from, and what extension(s)
you want to identify PHP files. .php is the standard, but you can use .html, .phtml, or
whatever you want.

o Go to your HTTP configuration files (/usr/local/apache/conf or whatever your

path is)

o Open httpd.conf with a text editor.

o Search for the word DocumentRoot (which should appear twice), and change
both paths to the directory you want to serve files out of (in our case,
/home/httpd). We recommend a home directory rather than the default
/usr/local/apache/htdocs because it is more secure, but it doesn.t have to be
in a home directory. You will keep all your PHP files in this directory.

 Add at least one PHP extension directive, as shown in the first line of code that follows.
In the second line, we.ve also added a second handler to have all HTML files parsed
as PHP

AddType application/x-httpd-php .php

AddType application/x-httpd-php .html

 Restart your server. Every time you change your HTTP configuration or php.ini files,
you must stop and start your server again.

cd ../bin
./apachectl start

 Set the document root directory permissions to world-executable. The actual PHP files
in the directory need only be world-readable (644). If necessary, replace /home/httpd
with your document root below:

chmod 755 /home/httpd/html/php

 Open a text editor. Type: <?php phpinfo(); ?>. Save this file in your Web server's
document root as info.php.

 Start any Web browser and browse the file. You must always use an HTTP request
(http://www.testdomain.com/info.php or http://localhost/info.php or
http://127.0.0.1/info.php) rather than a filename (/home/httpd/info.php) for the file
to be parsed correctly

You should see a long table of information about your new PHP installation message
Congratulations!

13
 PHP

PHP Insta lation on Mac OS X with Apache

Mac users have the choice of either a binary or a source installation. In fact, your OS X
probably came with Apache and PHP preinstalled. This is likely to be quite an old build, and it
probably lacks many of the less common extensions.

However, if all you want is a quick Apache + PHP + MySQL/PostgreSQL setup on your laptop,
this is certainly the easiest way to fly. All you need to do is edit your Apache configuration file
and turn on the Web server.

So just follow the steps given below:

 Open the Apache config file in a text editor as root.

sudo open -a TextEdit /etc/httpd/httpd.conf

 Edit the file. Uncomment the following lines:

Load Module php5_module

AddModule mod_php5.c
AddType application/x-httpd-php .php

 You may also want to uncomment the <Directory /home/*/Sites> block or otherwise
tell Apache which directory to serve out of.

 Restart the Web server

sudo apachectl graceful

 Open a text editor. Type: <?php phpinfo(); ?>. Save this file in your Web server's
document root as info.php.

 Start any Web browser and browse the file.you must always use an HTTP request
(http://www.testdomain.com/info.php or http://localhost/info.php or
http://127.0.0.1/info.php) rather than a filename (/home/httpd/info.php) for the file
to be parsed correctly

You should see a long table of information about your new PHP installation message
Congratulations!

PHP Insta lation on Windows NT/2000/XP with IS

The Windows server installation of PHP running IIS is much simpler than on Unix, since it
involves a precompiled binary rather than a source build.

If you plan to install PHP over Windows, then here is the list of prerequisites:

14
 PHP

 A working PHP-supported Web server. Under previous versions of PHP, IIS/PWS was
the easiest choice because a module version of PHP was available for it; but PHP now
has added a much wider selection of modules for Windows.

 A correctly installed PHP-supported database like MySQL or Oracle etc. (if you plan to
use one)

 The PHP Windows binary distribution (download it atwww.php.net/downloads.php)

 A utility to unzip files (search http://download.cnet.com for PC file compression

utilities)

Now here are the steps to install Apache and PHP5 on your Windows machine. If your PHP
version is different, then please take care accordingly.

 Extract the binary archive using your unzip utility; C:\PHP is a common location.

 Copy some .dll files from your PHP directory to your systems directory (usually
C:\Winnt\System32). You need php5ts.dll for every case. You will also probably need
to copy the file corresponding to your Web server module - C:\PHP\Sapi\php5isapi.dll.
It's possible you will also need others from the dlls subfolder - but start with the two
mentioned above and add more if you need them.

 Copy either php.ini-dist or php.ini-recommended (preferably the latter) to your

Windows directory (C:\Winnt or C:\Winnt40), and rename it php.ini. Open this file in
a text editor (for example, Notepad). Edit this file to get configuration directives; We
highly recommend new users set error reporting to E_ALL on their development
machines at this point. For now, the most important thing is the doc_root directive
under the Paths and Directories section. make sure this matches your IIS Inetpub
folder (or wherever you plan to serve out of).

 Stop and restart the WWW service. Go to the Start menu -> Settings -> Control Panel
-> Services. Scroll down the list to IIS Admin Service. Select it and click Stop. After it
stops, select World Wide Web Publishing Service and click Start. Stopping and
restarting the service from within Internet Service Manager will not suffice. Since this
is Windows, you may also wish to reboot.

 Open a text editor. Type: <?php phpinfo(); ?>. Save this file in your Web server's
document root as info.php.

 Start any Web browser and browse the file.you must always use an HTTP request
(http://www.testdomain.com/info.php or http://localhost/info.php or
http://127.0.0.1/info.php) rather than a filename (/home/httpd/info.php) for the file
to be parsed correctly

You should see a long table of information about your new PHP installation message
Congratulations!

15
 PHP

PHP Insta lation on Windows NT/2000/XP with Apache

To install Apache with PHP 5 on Windows follow the following steps. If your PHP and Apache
versions are different, then please take care accordingly.

 Download Apache server from www.apache.org/dist/httpd/binaries/win32. You want

the current stable release version with the no_src.msi extension. Double-click the
installer file to install; C:\Program Files is a common location. The installer will also
ask you whether you want to run Apache as a service or from the command line or
DOS prompt. We recommend you do not install as a service, as this may cause
problems with startup.

 Extract the PHP binary archive using your unzip utility; C:\PHP is a common location.

 Copy some .dll files from your PHP directory to your system directory (usually
C:\Windows). You need php5ts.dll for every case. You will also probably need to copy
the file corresponding to your Web server module - C:\PHP\Sapi\php5apache.dll. to
your Apache modules directory. It's possible that you will also need others from the
dlls subfolder, but start with the two mentioned previously and add more if you need
them.

 Copy either php.ini-dist or php.ini-recommended (preferably the latter) to your

Windows directory, and rename it php.ini. Open this file in a text editor (for example,
Notepad). Edit this file to get configuration directives; At this point, we highly
recommend that new users set error reporting to E_ALL on their development
machines.

 Tell your Apache server where you want to serve files from and what extension(s) you
want to identify PHP files (.php is the standard, but you can use .html, .phtml, or
whatever you want). Go to your HTTP configuration files (C:\Program Files\Apache
Group\Apache\conf or whatever your path is), and open httpd.conf with a text editor.
Search for the word DocumentRoot (which should appear twice) and change both paths
to the directory you want to serve files out of. (The default is C:\Program Files\Apache
Group\Apache\htdocs.). Add at least one PHP extension directive as shown in the first
line of the following code:

LoadModule php5_module modules/php5apache.dll

AddType application/x-httpd-php .php .phtml


 You may also need to add the following line:

AddModule mod_php5.c

 Stop and restart the WWW service. Go to the Start menu -> Settings -> Control Panel
-> Services. Scroll down the list to IIS Admin Service. Select it and click Stop. After it
stops, select World Wide Web Publishing Service and click Start. Stopping and
restarting the service from within Internet Service Manager will not suffice. Since this
is Windows, you may also wish to reboot.
16
 PHP

 Open a text editor. Type: <?php phpinfo(); ?>. Save this file in your Web server's
document root as info.php.

 Start any Web browser and browse the file.you must always use an HTTP request
(http://www.testdomain.com/info.php or http://localhost/info.php or
http://127.0.0.1/info.php) rather than a filename (/home/httpd/info.php) for the file
to be parsed correctly

You should see a long table of information about your new PHP installation message
Congratulations!

Apache Configuration
If you are using Apache as a Web Server, then this section will guide you to edit Apache
Configuration Files.

PHP.INI File Configuration

The PHP configuration file, php.ini, is the final and most immediate way to affect PHP's
functionality.

Just Check it here: PHP.INI File Configuration

Windows IIS Configuration

To configure IIS on your Windows machine you can refer your IIS Reference Manual shipped
along with IIS.

Apache Configuration for PHP

Apache uses httpd.conf file for global settings, and the .htaccess file for per-directory access
settings. Older versions of Apache split up httpd.conf into three files (access.conf, httpd.conf,
and srm.conf), and some users still prefer this arrangement.

Apache server has a very powerful, but slightly complex, configuration system of its own.
Learn more about it at the Apache Web site: www.apache.org

The following section describes settings in httpd.conf that affect PHP directly and cannot be
set elsewhere. If you have standard installation, then httpd.conf will be found at
/etc/httpd/conf:

Timeout
This value sets the default number of seconds before any HTTP request will time out. If you
set PHP's max_execution_time to longer than this value, PHP will keep grinding away but the

17
 PHP

user may see a 404 error. In safe mode, this value will be ignored; you must use the timeout
value in php.ini instead

DocumentRoot
DocumentRoot designates the root directory for all HTTP processes on that server. It looks
something like this on Unix:
DocumentRoot ./usr/local/apache_1.3.6/htdocs.
You can choose any directory as document root.

AddType
The PHP MIME type needs to be set here for PHP files to be parsed. Remember that you can
associate any file extension with PHP like .php3, .php5 or .htm.

AddType application/x-httpd-php .php

AddType application/x-httpd-phps .phps
AddType application/x-httpd-php3 .php3 .phtml
AddType application/x-httpd-php .html

Action
You must uncomment this line for the Windows apxs module version of Apache with shared
object support:

LoadModule php4_module modules/php4apache.dll

or on Unix flavors:

LoadModule php4_module modules/mod_php.so

AddModule
You must uncomment this line for the static module version of Apache.

AddModule mod_php4.c

PHP.INI file Configuration

The PHP configuration file, php.ini, is the final and most immediate way to affect PHP's
functionality. The php.ini file is read each time PHP is initialized.in other words, whenever
httpd is restarted for the module version or with each script execution for the CGI version. If

18
 PHP

your change isn’t showing up, remember to stop and restart httpd. If it still isn’t showing up,
use phpinfo() to check the path to php.ini.

The configuration file is well commented and thorough. Keys are case sensitive, keyword
values are not; whitespace, and lines beginning with semicolons are ignored. Booleans can
be represented by 1/0, Yes/No, On/Off, or True/False. The default values in php.ini-dist will
result in a reasonable PHP installation that can be tweaked later.

Here we are explaining the important settings in php.ini which you may need for your PHP
Parser.

short_open_tag = Off
Short open tags look like this: <? ?>. This option must be set to Off if you want to use XML
functions.

safe_mode = Off
If this is set to On, you probably compiled PHP with the --enable-safe-mode flag. Safe mode
is most relevant to CGI use. See the explanation in the section "CGI compile-time options".
earlier in this chapter.

safe_mode_exec_dir = [DIR]
This option is relevant only if safe mode is on; it can also be set with the --with-exec-dir flag
during the Unix build process. PHP in safe mode only executes external binaries out of this
directory. The default is /usr/local/bin. This has nothing to do with serving up a normal
PHP/HTML Web page.

safe_mode_allowed_env_vars = [PHP_]
This option sets which environment variables users can change in safe mode. The default is
only those variables prepended with "PHP_". If this directive is empty, most variables are
alterable.

safe_mode_protected_env_vars = [LD_LIBRARY_PATH]
This option sets which environment variables users can't change in safe mode, even if
safe_mode_allowed_env_vars is set permissively.

disable_functions = [function1, function2...]

A welcome addition to PHP4 configuration and one perpetuated in PHP5 is the ability to disable
selected functions for security reasons. Previously, this necessitated hand-editing the C code
from which PHP was made. Filesystem, system, and network functions should probably be the
first to go because allowing the capability to write files and alter the system over HTTP is
never such a safe idea.

19
 PHP

max_execution_time = 30
The function set_time_limit() won.t work in safe mode, so this is the main way to make a
script time out in safe mode. In Windows, you have to abort based on maximum memory
consumed rather than time. You can also use the Apache timeout setting to timeout if you
use Apache, but that will apply to non-PHP files on the site too.

error_reporting = E_ALL & ~E_NOTICE

The default value is E_ALL & ~E_NOTICE, all errors except notices. Development servers
should be set to at least the default; only production servers should even consider a lesser
value

error_prepend_string = [""]
With its bookend, error_append_string, this setting allows you to make error messages a
different color than other text, or what you have.

warn_plus_overloading = Off
This setting issues a warning if the + operator is used with strings, as in a form value.

variables_order = EGPCS
This configuration setting supersedes gpc_order. Both are now deprecated along with
register_globals. It sets the order of the different variables: Environment, GET, POST,
COOKIE, and SERVER (aka Built-in).

You can change this order around. Variables will be overwritten successively in left-to-right
order, with the rightmost one winning the hand every time. This means if you left the default
setting and happened to use the same name for an environment variable, a POST variable,
and a COOKIE variable, the COOKIE variable would own that name at the end of the process.
In real life, this doesn't happen much.

register_globals = Off
This setting allows you to decide whether you wish to register EGPCS variables as global. This
is now deprecated, and as of PHP4.2, this flag is set to Off by default. Use superglobal arrays
instead. All the major code listings in this book use superglobal arrays.

gpc_order = GPC
This setting has been GPC Deprecated.

20
 PHP

magic_quotes_gpc = On
This setting escapes quotes in incoming GET/POST/COOKIE data. If you use a lot of forms
which possibly submit to themselves or other forms and display form values, you may need
to set this directive to On or prepare to use addslashes() on string-type data.

magic_quotes_runtime = Off
This setting escapes quotes in incoming database and text strings. Remember that SQL adds
slashes to single quotes and apostrophes when storing strings and does not strip them off
when returning them. If this setting is Off, you will need to use stripslashes() when outputting
any type of string data from a SQL database. If magic_quotes_sybase is set to On, this must
be Off.

magic_quotes_sybase = Off
This setting escapes single quotes in incoming database and text strings with Sybase-style
single quotes rather than backslashes. If magic_quotes_runtime is set to On, this must be
Off.

auto-prepend-file = [path/to/file]
If a path is specified here, PHP must automatically include() it at the beginning of every PHP
file. Include path restrictions do apply.

auto-append-file = [path/to/file]
If a path is specified here, PHP must automatically include() it at the end of every PHP
file.unless you escape by using the exit() function. Include path restrictions do apply.

include_path = [DIR]
If you set this value, you will only be allowed to include or require files from these directories.
The include directory is generally under your document root; this is mandatory if you.re
running in safe mode. Set this to . in order to include files from the same directory your script
is in. Multiple directories are separated by colons: .:/usr/local/apache/htdocs:/usr/local/lib.

doc_root = [DIR]
If you.re using Apache, you.ve already set a document root for this server or virtual host in
httpd.conf. Set this value here if you.re using safe mode or if you want to enable PHP only on
a portion of your site (for example, only in one subdirectory of your Web root).

file_uploads = [on/off]
Turn on this flag if you will upload files using PHP script.

upload_tmp_dir = [DIR]
Do not uncomment this line unless you understand the implications of HTTP uploads!

21
 PHP

session.save-handler = files
Except in rare circumstances, you will not want to change this setting. So don't touch it.

ignore_user_abort = [On/Off]
This setting controls what happens if a site visitor clicks the browser.s Stop button. The default
is On, which means that the script continues to run to completion or timeout. If the setting is
changed to Off, the script will abort. This setting only works in module mode, not CGI.

mysql.default_host = hostname
The default server host to use when connecting to the database server if no other host is
specified.

mysql.default_user = username
The default user name to use when connecting to the database server if no other name is
specified.

mysql.default_password = password
The default password to use when connecting to the database server if no other password is
specified.

22
 PHP
PHP ─ SYNTAX OVERVIEW

Escaping to PHP
The PHP parsing engine needs a way to differentiate PHP code from other elements in the
page. The mechanism for doing so is known as 'escaping to PHP.' There are four ways to do
this:

Canonical PHP tags

The most universally effective PHP tag style is:

<?php...?>

If you use this style, you can be positive that your tags will always be correctly interpreted.

Short-open (SGML-style) tags

Short or short-open tags look like this:

<?...?>

Short tags are, as one might expect, the shortest option You must do one of two things to
enable PHP to recognize the tags:

 Choose the --enable-short-tags configuration option when you're building PHP.

 Set the short_open_tag setting in your php.ini file to on. This option must be disabled
to parse XML with PHP because the same syntax is used for XML tags.

ASP-style tags
ASP-style tags mimic the tags used by Active Server Pages to delineate code blocks. ASP-
style tags look like this:

<%...%>

To use ASP-style tags, you will need to set the configuration option in your php.ini file.

HTML script tags

HTML script tags look like this:

<script language="PHP">...</script>

23
 PHP

Commenting PHP Code

A comment is the portion of a program that exists only for the human reader and stripped out
before displaying the programs result. There are two commenting formats in PHP:

Single-line comments: They are generally used for short explanations or notes relevant to
the local code. Here are the examples of single line comments.

<?
# This is a comment, and
# This is the second line of the comment
// This is a comment too. Each style comments only
print "An example with single line comments";
?>

Multi-lines printing: Here are the examples to print multiple lines in a single print
statement:

<?
# First Example
print <<<END
This uses the "here document" syntax to output
multiple lines with $variable interpolation. Note
that the here document terminator must appear on a
line with just a semicolon no extra whitespace!
END;
# Second Example
print "This spans
multiple lines. The newlines will be
output as well";
?>

Multi-lines comments: They are generally used to provide pseudocode algorithms and more
detailed explanations when necessary. The multiline style of commenting is the same as in C.
Here are the example of multi lines comments.

<?
/* This is a comment with multiline
Author : Mohammad Mohtashim
Purpose: Multiline Comments Demo
Subject: PHP
*/
print "An example with multi line comments";
?>

24
 PHP

PHP is whitespace insensitive

Whitespace is the stuff you type that is typically invisible on the screen, including spaces,
tabs, and carriage returns (end-of-line characters).

PHP whitespace insensitive means that it almost never matters how many whitespace
characters you have in a row.one whitespace character is the same as many such characters.

For example, each of the following PHP statements that assigns the sum of 2 + 2 to the
variable $four is equivalent:

$four = 2 + 2; // single spaces

$four <tab>=<tab2<tab>+<tab>2 ; // spaces and tabs
$four =
2+
2; // multiple lines

PHP is case sensitive

Yeah it is true that PHP is a case sensitive language. Try out the following example:

<html>
<body>
<?
$capital = 67;
print("Variable capital is $capital<br>");
print("Variable CaPiTaL is $CaPiTaL<br>");
?>
</body>
</html>

This will produce the following result:

Variable capital is 67
Variable CaPiTaL is

Statements are expressions terminated bysemicolons

A statement in PHP is any expression that is followed by a semicolon (;).Any sequence of valid
PHP statements that is enclosed by the PHP tags is a valid PHP program. Here is a typical
statement in PHP, which in this case assigns a string of characters to a variable called
$greeting:

$greeting = "Welcome to PHP!";

25
 PHP

Expressions are combinations of tokens

The smallest building blocks of PHP are the indivisible tokens, such as numbers (3.14159),
strings (.two.), variables ($two), constants (TRUE), and the special words that make up the
syntax of PHP itself like if, else, while, for and so forth

Braces make blocks

Although statements cannot be combined like expressions, you can always put a sequence of
statements anywhere a statement can go by enclosing them in a set of curly braces.
Here both statements are equivalent:

if (3 == 2 + 1)
print("Good - I haven't totally lost my mind.<br>");

if (3 == 2 + 1)
{
print("Good - I haven't totally");
print("lost my mind.<br>");
}

Running PHP Script from Command Prompt

Yes you can run your PHP script on your command prompt. Assuming you have the following
content in test.php file

<?php
echo "Hello PHP!!!!!";
?>

Now run this script as command prompt as follows:

$ php test.php

It will produce the following result

Hello PHP!!!!!

26
 PHP
PHP ─ VARIABLE TYPES

The main way to store information in the middle of a PHP program is by using a variable.
Here are the most important things to know about variables in PHP.

 All variables in PHP are denoted with a leading dollar sign ($).

 The value of a variable is the value of its most recent assignment.

 Variables are assigned with the = operator, with the variable on the left-hand side and
the expression to be evaluated on the right.

 Variables can, but do not need, to be declared before assignment.

 Variables in PHP do not have intrinsic types - a variable does not know in advance
whether it will be used to store a number or a string of characters.

 Variables used before they are assigned have default values.

 PHP does a good job of automatically converting types from one to another when
necessary.

 PHP variables are Perl-like.

PHP has a total of eight data types which we use to construct our variables:

 Integers: are whole numbers, without a decimal point, like 4195.

 Doubles: are floating-point numbers, like 3.14159 or 49.1.

 Booleans: have only two possible values either true or false.

 NULL: is a special type that only has one value: NULL.

 Strings: are sequences of characters, like 'PHP supports string operations.'

 Arrays: are named and indexed collections of other values.

 Objects: are instances of programmer-defined classes, which can package up both

other kinds of values and functions that are specific to the class.

 Resources: are special variables that hold references to resources external to PHP
(such as database connections).

The first five are simple types, and the next two (arrays and objects) are compound - the
compound types can package up other arbitrary values of arbitrary type, whereas the simple
types cannot.
27
 PHP

We will explain only simile data type in this chapters. Array and Objects will be explained
separately.

Integers
They are whole numbers, without a decimal point, like 4195. They are the simplest type .they
correspond to simple whole numbers, both positive and negative. Integers can be assigned
to variables, or they can be used in expressions, like so:

$int_var = 12345;
$another_int = -12345 + 12345;

Integer can be in decimal (base 10), octal (base 8), and hexadecimal (base 16) format.
Decimal format is the default, octal integers are specified with a leading 0, and hexadecimals
have a leading 0x.

For most common platforms, the largest integer is (2**31 . 1) (or 2,147,483,647), and the
smallest (most negative) integer is . (2**31 . 1) (or .2,147,483,647).

Doubles
They like 3.14159 or 49.1. By default, doubles print with the minimum number of decimal
places needed. For example, the code:

$many = 2.2888800;
$many_2 = 2.2111200;
$few = $many + $many_2;
print(.$many + $many_2 = $few<br>.);

It produces the following browser output:

2.28888 + 2.21112 = 4.5

Boolean
They have only two possible values either true or false. PHP provides a couple of constants
especially for use as Booleans: TRUE and FALSE, which can be used like so:

if (TRUE)
print("This will always print<br>");
else
print("This will never print<br>");

28
 PHP

Interpreting other types as Booleans

Here are the rules for determine the "truth" of any value not already of the Boolean type:

 If the value is a number, it is false if exactly equal to zero and true otherwise.

 If the value is a string, it is false if the string is empty (has zero characters) or is the
string "0", and is true otherwise.

 Values of type NULL are always false.

 If the value is an array, it is false if it contains no other values, and it is true otherwise.
For an object, containing a value means having a member variable that has been
assigned a value.

 Valid resources are true (although some functions that return resources when they are
successful will return FALSE when unsuccessful).

 Don't use double as Booleans.

Each of the following variables has the truth value embedded in its name when it is used in a
Boolean context.

$true_num = 3 + 0.14159;
$true_str = "Tried and true"
$true_array[49] = "An array element";
$false_array = array();
$false_null = NULL;
$false_num = 999 - 999;
$false_str = "";

NULL
NULL is a special type that only has one value: NULL. To give a variable the NULL value,
simply assign it like this:

$my_var = NULL;

The special constant NULL is capitalized by convention, but actually it is case insensitive; you
could just as well have typed:

$my_var = null;

A variable that has been assigned NULL has the following properties:

 It evaluates to FALSE in a Boolean context.


29
 PHP


 It returns FALSE when tested with IsSet() function.

Strings
They are sequences of characters, like "PHP supports string operations". Following are valid
examples of string:

$string_1 = "This is a string in double quotes";

$string_2 = "This is a somewhat longer, singly quoted string";
$string_39 = "This string has thirty-nine characters";
$string_0 = ""; // a string with zero characters

Singly quoted strings are treated almost literally, whereas doubly quoted strings replace
variables with their values as well as specially interpreting certain character sequences.

<?
$variable = "name";
$literally = 'My $variable will not print!\\n';
print($literally);
$literally = "My $variable will print!\\n";
print($literally);
?>

This will produce the following result:

My $variable will not print!\n

My name will print

There are no artificial limits on string length - within the bounds of available memory, you
ought to be able to make arbitrarily long strings.

Strings that are delimited by double quotes (as in "this") are preprocessed in both the
following two ways by PHP:

 Certain character sequences beginning with backslash (\) are replaced with special
characters

 Variable names (starting with $) are replaced with string representations of their
values.

The escape-sequence replacements are:

 \n is replaced by the newline character

30
 PHP

 \r is replaced by the carriage-return character

 \t is replaced by the tab character

 \$ is replaced by the dollar sign itself ($)

 \" is replaced by a single double-quote (")

 \\ is replaced by a single backslash (\)

Here Document
You can assign multiple lines to a single string variable using here document:

<?php

$channel =<<<_XML_
<channel>
<title>What's For Dinner<title>
<link>http://menu.example.com/<link>
<description>Choose what to eat tonight.</description>
</channel>
_XML_;

echo <<<END
This uses the "here document" syntax to output
multiple lines with variable interpolation. Note
that the here document terminator must appear on a
line with just a semicolon. no extra whitespace!
<br />
END;

print $channel;
?>

This will produce the following result:

This uses the "here document" syntax to output

multiple lines with variable interpolation. Note

31
 PHP

that the here document terminator must appear on a

line with just a semicolon. no extra whitespace!

<channel>
<title>What's For Dinner<title>
<link>http://menu.example.com/<link>
<description>Choose what to eat tonight.</description>

Variable Naming
Rules for naming a variable is:

 Variable names must begin with a letter or underscore character.

 A variable name can consist of numbers, letters, underscores but you cannot use
characters like + , - , % , ( , ) . & , etc

There is no size limit for variables.

PHP – Variables
Scope can be defined as the range of availability a variable has to the program in which it is
declared. PHP variables can be one of four scope types:

 Local variables

 Function parameters

 Global variables

 Static variables

PHP Local Variables

A variable declared in a function is considered local; that is, it can be referenced solely in that
function. Any assignment outside of that function will be considered to be an entirely different
variable from the one contained in the function:

<?
$x = 4;
function assignx () {
32
 PHP

$x = 0;
print "\$x inside function is $x.
";
}
assignx();
print "\$x outside of function is $x.
";
?>

This will produce the following result.

$x inside function is 0.
$x outside of function is 4.

PHP Function Parameters

PHP Functions are covered in detail in PHP Function Chapter. In short, a function is a small
unit of program which can take some input in the form of parameters and does some
processing and may return a value.

Function parameters are declared after the function name and inside parentheses. They are
declared much like a typical variable would be:

<?
// multiply a value by 10 and return it to the caller
function multiply ($value) {
$value = $value * 10;
return $value;
}

$retval = multiply (10);

Print "Return value is $retval\n";
?>

This will produce the following result.

Return value is 100

33
 PHP

PHP Global Variables

In contrast to local variables, a global variable can be accessed in any part of the program.
However, in order to be modified, a global variable must be explicitly declared to be global in
the function in which it is to be modified. This is accomplished, conveniently enough, by
placing the keyword GLOBAL in front of the variable that should be recognized as global.
Placing this keyword in front of an already existing variable tells PHP to use the variable having
that name. Consider an example:

<?
$somevar = 15;
function addit() {
GLOBAL $somevar;
$somevar++;
print "Somevar is $somevar";
}
addit();
?>

This will produce the following result.

Somevar is 16

PHP Static Variables

The final type of variable scoping that I discuss is known as static. In contrast to the variables
declared as function parameters, which are destroyed on the function's exit, a static variable
will not lose its value when the function exits and will still hold that value should the function
be called again.

You can declare a variable to be static simply by placing the keyword STATIC in front of the
variable name.

<?
function keep_track() {
STATIC $count = 0;
$count++;
print $count;
print "
";

34
 PHP

}
keep_track();
keep_track();
keep_track();
?>

This will produce the following result.

1
2
3

35
 PHP
PHP ─ CONSTANTS

A constant is a name or an identifier for a simple value. A constant value cannot change
during the execution of the script. By default, a constant is case-sensitive. By convention,
constant identifiers are always uppercase. A constant name starts with a letter or underscore,
followed by any number of letters, numbers, or underscores. If you have defined a constant,
it can never be changed or undefined.

To define a constant you have to use define() function and to retrieve the value of a constant,
you have to simply specifying its name. Unlike with variables, you do not need to have a
constant with a $. You can also use the function constant() to read a constant's value if you
wish to obtain the constant's name dynamically.

constant() function
As indicated by the name, this function will return the value of the constant.

This is useful when you want to retrieve value of a constant, but you do not know its name,
i.e., it is stored in a variable or returned by a function.

constant() example
<?php

define("MINSIZE", 50);

echo MINSIZE;
echo constant("MINSIZE"); // same thing as the previous line

?>

Only scalar data (boolean, integer, float and string) can be contained in constants.

Differences between constants and variables are

 There is no need to write a dollar sign ($) before a constant, where as in Variable one
has to write a dollar sign.

 Constants cannot be defined by simple assignment, they may only be defined using
the define() function.

 Constants may be defined and accessed anywhere without regard to variable scoping
rules.

36
 PHP

 Once the Constants have been set, may not be redefined or undefined.

Valid and invalid constant names

// Valid constant names
define("ONE", "first thing");
define("TWO2", "second thing");
define("THREE_3", "third thing")
// Invalid constant names
define("2TWO", "second thing");
define(" THREE ", "third value");

PHP Magic constants

PHP provides a large number of predefined constants to any script which it runs.

There are five magical constants that change depending on where they are used. For example,
the value of LINE depends on the line that it's used on in your script. These special
constants are case-insensitive and are as follows:

The following table lists a few "magical" PHP constants along with their description:

Name Description

LINE The current line number of the file.

FILE The full path and filename of the file. If used inside an include, the
name of the included file is returned. Since PHP
4.0.2, FILE always contains an absolute path whereas in older
versions it contained relative path under some circumstances.

FUNCTION The function name. (Added in PHP 4.3.0) As of PHP 5 this constant
returns the function name as it was declared (case-sensitive). In PHP
4 its value is always lowercased.

CLASS The class name. (Added in PHP 4.3.0) As of PHP 5 this constant
returns the class name as it was declared (case-sensitive). In PHP 4
its value is always lowercased.

METHOD The class method name. (Added in PHP 5.0.0) The method name is
returned as it was declared (case-sensitive).

37
 PHP
PHP ─ OPERATOR TYPES

What is Operator? Simple answer can be given using expression 4 + 5 is equal to 9. Here
4 and 5 are called operands and + is called operator. PHP language supports following type
of operators.

 Arithmetic Operators

 Comparison Operators

 Logical (or Relational) Operators

 Assignment Operators

 Conditional (or ternary) Operators

Let’s have a look on all operators one by one.

Arithmetic Operators
The following arithmetic operators are supported by PHP language:

Assume variable A holds 10 and variable B holds 20 then:

Operator Description Example

+ Adds two operands A + B will give 30

- Subtracts second operand from the first A - B will give -10

* Multiply both operands A * B will give 200

/ Divide the numerator by denominator B / A will give 2

% Modulus Operator and remainder of after an B % A will give 0

integer division

++ Increment operator, increases integer value by A++ will give 11

one

-- Decrement operator, decreases integer value A-- will give 9

by one

38
 PHP

Example
Try the following example to understand all the arithmetic operators. Copy and paste following
PHP program in test.php file and keep it in your PHP Server's document root and browse it
using any browser.

<html>
<head><title>Arithmetical Operators</title><head>
<body>
<?php
$a = 42;
$b = 20;

$c = $a + $b;
echo "Addition Operation Result: $c <br/>";
$c = $a - $b;
echo "Subtraction Operation Result: $c <br/>";
$c = $a * $b;
echo "Multiplication Operation Result: $c <br/>";
$c = $a / $b;
echo "Division Operation Result: $c <br/>";
$c = $a % $b;
echo "Modulus Operation Result: $c <br/>";
$c = $a++;
echo "Increment Operation Result: $c <br/>";
$c = $a--;
echo "Decrement Operation Result: $c <br/>";
?>
</body>
</html>

This will produce the following result:

Addition Operation Result: 62

Subtraction Operation Result: 22
Multiplication Operation Result: 840
Division Operation Result: 2.1

39
 PHP

Modulus Operation Result: 2

Increment Operation Result: 42
Decrement Operation Result: 43

40
PHP

41