Industrial
Technical Data Sheet
Fibracon® PTFE Detectaflon
Typical characteristics Typical industries
X-ray and metal detectable Chemical Processing Industry
Easy to clean, withstands Vehicle Construction
chemical cleaning products Electronics
and other cleaning processes Oil and Gas
Mechanical Engineering
Industry
Healthcare
Food Industry
Wind Energy
Test method Unit Guideline value
General properties
Specific Gravity ASTM D4894 - 2.32
Mechanical properties
Hardness Needle Shore D 63
Tensile Strength (23°C) ASTM D4894 MPa 28
Elongation at Break ASTM D4894 % 300
Coefficient of friction (Dynamic) ISO 7148 * - 0.22
Wear rate ISO 7148 * mm/h 0.022
Thermal properties
Service Temperature °C -200 to +260
This data provides typical values on a small selection of properties of the material, and should only be used as a guide to the generic material performance.
*ISO 7148 - Tribo starting conditions Pin on ring ISO 7148 Load= 3.5 N Rotating Speed= 4 m/sec Temp.= 80°C Counter-surface= STST Ra= 0.25-0.35 µm Contact area of the pin: 78.5
mm^2
Röchling Industrial (UK) Ltd. – High Peak
Bowden Hey Road - Chapel-en-le-Frith • SK23 0QZ High Peak, Derbyshire/United Kingdom (GB) • Tel. +44 1298 811 800
[email protected] • www.roechling.com/industrial/high-peak
Print: 26/06/2024 • Release: 20/09/2023
PIM-Version: 33 • PIM-ID: 709598 • PIM-Code: 33-40-6.13-7.7.8.5.5.9.5.10-4
Page 1 / 1 (Dates in DD/MM/YYYY)
