Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    CKCD Full en Metric A4

    Uploaded by

    Nelson Cruz

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CKCD Full en Metric A4

    Uploaded by

    Nelson Cruz
    7 views2 pages

    Original Title

    CKCD_full_en_metric_a4

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views2 pages

    CKCD Full en Metric A4

    Uploaded by

    Nelson Cruz

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MODEL Pilot-to-open check valve with sealed pilot

    CKCD SERIES 1 / CAPACITY: 60 L/min. / CAVITY: T-11A

    sunhydraulics.com/model/CKCD

    This valve is a pilot to open check valve. It has a sealed pilot, a steel seat, and is non-vented. It allows free flow
    from the valve (port 2) to the load (port 1) and blocks flow in the opposite direction. Pressure at the pilot (port 3) will
    open the valve from port 1 to port 2. Pilot pressure needed at port 3 to open the valve is directly proportional to the
    load pressure at port 1. Pressure at port 2 directly opposes pilot pressure.

    TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

    Cavity T-11A
    Series 1
    Capacity 60 L/min.
    Maximum Operating Pressure 350 bar
    Pilot Ratio 3:1
    Maximum Valve Leakage at 110 SUS (24 cSt) 0,07 cc/min.
    Valve Hex Size 22,2 mm
    Valve Installation Torque 41 - 47 Nm
    Seal kit - Cartridge Buna: 990011007
    Seal kit - Cartridge EPDM: 990011014
    Seal kit - Cartridge Polyurethane: 990011002
    Seal kit - Cartridge Viton: 990011006
    Model Weight 0.13 kg.

    CONFIGURATION OPTIONS Model Code Example: CKCDXCN


    CONTROL (X) CRACKING PRESSURE (C) SEAL MATERIAL (N) MATERIAL/COATING
    X Standard Pilot C 30 psi (2 bar) N Buna-N Standard Material/Coating
    L Manual Load Release A 4 psi (0,3 bar) E EPDM /AP Stainless Steel, Passivated
    B 15 psi (1 bar) V Viton /LH Mild Steel, Zinc-Nickel
    D 50 psi (3,5 bar)
    E 75 psi (5 bar)
    F 100 psi (7 bar)
    G 150 psi (10,5 bar)

    c 2024 Sun Hydraulics 1 of 2


    TECHNICAL FEATURES
    This 3 port pilot-to-open check valve and 3 port counterbalance valves are physically interchangeable (i.e. same cavities, same flow path for a given frame size).
    However, cartridge extension dimensions from the mounting surface may vary.
    Provides hose break protection, prevents loads from drifting and positively locks pressurized loads.
    Extremely low leakage. The seat and poppet are heat treated for long life. If the load drifts due to the valve, the seat has probably been damaged by contamination
    and the valve should be replaced.
    Sealed pilot for use in circuits where cross port leakage is undesirable.
    Optional external porting out of the hex end of the cartridge is available for external piloting. In this configuration, port 3 is blocked. See Control options E, and P.
    Pilot-to-open check cartridges are locking valves, not motion control valves. For motion control applications, use counterbalance valves.
    For models with manual load release control option, turn load release clockwise to release load.
    Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage
    the seals.
    Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel
    components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of
    Construction page located under TECH RESOURCES.
    Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
    machining variations.

    PERFORMANCE CURVES

    RELATED MODELS
    CKCDS Vented pilot-to-open check valve with SAE-4 external pilot port and sealed pilot
    CKCDV Vented pilot-to-open check valve with 1/4 NPTF external pilot port and sealed pilot

    c 2024 Sun Hydraulics 2 of 2

    You might also like