User Manual V1.

1
 1. Warning
Please consult your doctor before starting a new exercise program. Despite its ability to track your heart
rate, this smart watch is only intended to help people live healthier lives and should not in any case
be used for any medical purpose. Remember to consult your doctor before starting any exercise or diet
program.

2. Cautions for Charging

Please keep the metal contacts free of dirt, oxidation and impurities to ensure a good charging
connection. Wipe clean if any, otherwise it may not charge properly.

Illustration:

1. Please align the magnetic cable with the charging port of the watch for charging, the cable should attach automatically.
2. Please insert the USB cable into a 5V 500mA adapter, and it will take 2~3 hours to fully charge the battery.
3. Please make sure to charge at least once every month if the device is not used for a long period of time.

1
 3. Device Requirements
1. Requires device with Android 5.0, iOS 10.0 or later, and Bluetooth 4.0 or above. Devices with other
Operating Systems are not supported.
2. Devices with Android 6.0 or later are required to turn on GPS to be able to scan the watch for
connection.

4. Power on the Watch

Press and hold the upper side-button or charge the watch to power on the device.

5. Gesture Control

See below illustration of gesture control:

2
 6. Download & Install App

6.1 Scan the below QR Code with your smart phone and download and
install the “Lufitcode” App; or search “Lufitcode” in Huawei App Store or
iOS App Store, or search “Lufitcode” in Google Play Store, to download and
install the App.

App Download the QR code

6.2 Add Smart Watch in App

1) Scan & Connect Watch: Place the watch close to your smart phone, turn on the phone's Bluetooth
and GPS, open the App, allow all permissions requested by the prompts, then tap Add Device on the
upper right corner of the App interface. The Bluetooth name of the smart watch should be discovered
as “SmartWatch”, tap it to connect. Once connected successfully, swipe down the watch dial to view
the “BLE” symbol at the bottom of the watch face, which should become green to indicate that it is
connected, or be gray if not connected. After successful connection, the time, date and language of the
watch will be synchronized with your phone settings and be displayed correctly.

1. Add Device 2. Scan Watch Bluetooth “SmartWatch” 3. Connection Symbol “BLE”

3
6.3 Pairing for Bluetooth Call
Instructions: The watch connection is divided into App connection and Bluetooth call connection. Both
should be connected properly to enable Bluetooth Call function.
Step 1 App Connection: Connect your phone to the “Lufitcode” App.
Step 2 Bluetooth Call Connection: Swipe upwards on the dial screen to enter “Call Pairing” interface,
and the watch will start Bluetooth broadcast for 60 seconds and wait for phone connection. At the same
time, open the phone's “System Settings”, enter Bluetooth function to search for Call Watch on which
you can tap to pair for connection, the watch should show that it is paired successfully.
(Once paired, the Call Watch status in the phone's Bluetooth setting will show as disconnected, but it
will resume connection automatically upon incoming/outgoing calls.)

1. Call Pairing 2. Await Phone Connection 3. Search for Call Watch 4. Paired Successfully

6.4 Set Frequent Contacts: Open the “Device” interface in the App, proceed to add contacts in “Frequent
contacts” setting, then the App will synchronize the contacts to the watch where you can find them in
Frequent Contact function.

4
 1. Frequent Contacts 2. Add Contact Info.

6.5 Dial via Watch: Open the Frequent Contact function in the watch and dial from there, and the
connected phone will dial the number synchronously. (While calling via watch, some smart phone models
also support volume adjustment).

1. Frequent Contacts 2. Contact Info 3. Calling via Watch

5
6.6 Answer Incoming Call via Watch: When both the App and
Bluetooth Call are connected, upon any incoming call to the phone, the
watch will display an answering interface where you can decide to answer
or hang up.

6.7 Unpair Bluetooth Call: Tap the paired CallWatch device in the
phone's Bluetooth setting, click Unpair to unbind. Incoming Call Alert Interface

7. Watch Functions

7.1 Swipe down the dial screen to access shortcuts and directly select functions.
Shortcuts: Do not disturb session, brightness adjustment, find phone, alarm, settings, App connection
status, view battery, date
7.2 Interface Switching: Touch and swipe the dial left or right to switch the interface
7.2.1 Time: When the watch and the App are connected for the first time, the App will automatically
synchronize the time, date, and language of the watch.
7.2.2 Steps: The watch is in steps counting mode by default. Wear the watch on the wrist, and when the
user walks, the watch records the steps data according to the number of arm swings.
7.2.3 Heart Rate: In heart rate detection mode, the watch's battery life will be shortened.
7.2.4 Sleep: When put on, the watch will automatically detect the user's sleep status at night. Sleep
data details can be synchronized to and viewed in the App.
7.2.5 Weather: The watch will synchronize weather conditions when connected to the App. You need to
allow the App to access network and location permissions on your phone.
7.2.6 Notification: Notification alerts where you can view unread messages.
7.3 Function Interface: Swipe up the dial screen to enter the function interface
7.3.1. Sport: Tap or press the right lower button to enter the sport interface, swipe the screen up and
6
down to select the type of sport, tap to start the exercise. Press the upper button or swipe the screen to
the right to end the current sport and save the data. You can view the sport data details once synced to
the App.
7.3.2. Music: You need to connect the App to use this function. Tap to enter the Music function, you can
control the music to play, pause, switch to previous song, or switch to next song. Swipe the screen to the
right to exit the function. (iPhone devices need to pair in Bluetooth to control the music).
7.3.3. Take Photo: When connected to the App, tap on the "Take Photo" function on the watch, the
watch and the phone will enter the take-photo mode.
Tap on the watch screen to control the camera remotely, swipe the screen to the right to exit.
7.3.4. Brightness: Tap +/- to adjust the brightness of the screen.
7.3.5. Find Phone: When the App is connected, tap Find Phone, the phone will ring to alert its location.
Swipe the screen to the right to exit.
7.3.6. Settings:
About: Displays the watch App's QR code, mac address, and software version.
Power off: Follow the prompt to choose whether to power off.
Reset: Follow the prompt to choose whether to reset.

8. App Functions & Settings

8.1 Home
Today's activity: Sync the data of the watch terminal, you can view the steps count, sleep status and
heart rate data. Tap on each section to view the history. You can add a device via the Add Device on the
upper right corner when not yet connected to any.
8.2 Sport: When there are multiple sports data in the watch, sync to view the sports records from the
watch.
8.3 Device
7
8.3.1 You can add a device when not yet connected to any, or unbind a connected device here.
8.3.2 Notification: Tap to set the notification permission, you can set notifications for incoming calls,
messages, personal apps or system apps.
Android Device: Follow the prompt to enter the notification access setting, grant the permission for
receiving phone notifications by checking the “Lufitcode” App and turn on the app notification switch.
Apple Device: When the watch is connected to the App, the system will pop up a prompt of "Bluetooth
Pairing Request". Select "Pair", then select "Allow" to allow the App to display iPhone notifications, and
turn on the App's notification switch to allow the watch to receive push notification alerts from iOS.

8.3.3 Heart Rate Test: Set the automatic heart rate detection switch .
8.3.4 Take Photo: Open the App's Take Photo function, the watch will enter the camera mode at the
same time where you can control the phone camera remotely.
8.3.5 Frequent Contacts: Add contacts from your phone to sync to the watch terminal, to enable quick
dialing of the frequent contacts via watch terminal.
8.3.6 Sedentary Reminder: Set the switch for sedentary reminder.
8.3.7 Drinking Water Reminder: Set the switch for hydration reminder.
8.3.8 Alarm Reminder: Set the alarm time and repeat interval and synchronize them to the watch
terminal.

8
8.3.9 Tilt to Wake Screen: Set the switch for tilting wrist to wake screen function. The screen will not
wake when tilting your wrist if this is switched off.
8.3.10 Firmware Update: Detect firmware update for the watch terminal. Follow the prompt to perform
update.
8.3.11 Watch Face Push: When the watch is connected to the App, and there is an internet connection,
you can set the watch face to use the App's built-in watch face, or a photo taken or an image from the
album.
8.3.12 Unit Settings: Tap to set unit preferences between Metric/Imperial, or Celsius/Fahrenheit.
8.4 My
8.4.1 Personal Information: Set your gender, birthday, height and weight.
8.4.2 Target Step: Set your steps target.
8.4.3 About: View information such as App version.

9. Cautions

9.1 Theoretically, this watch supports devices running an operating system of iOS 10.0 or Android 5.0 or
above with Bluetooth 4.0.
Please note that not all mobile device models are supported, and it is subject to actual application.
9.2 This device uses 5V 500mA adapters for charging. Never use over-voltage or overloading power supply
for charging which may cause hardware damage.
9.3 The operating environment for this watch is 0℃ to 45℃ , and the charging temperature is 10℃
to 45℃ .
9.4 Please wipe the watch dry before charging if it is wet, otherwise it may cause malfunction and
erosion to the charging contact.

9
 10. FAQ

10.1 What if the App cannot discover my watch?

A. Confirm that your device is running Android 5.0, iOS 10.0 or later, with Bluetooth 4.0 or above support.
B. The watch should be placed close to your phone, and make sure that your phone's Bluetooth is turned
on.
C. GPS should be turned on for devices running Android 6.0 or above.
D. Make sure that you scan the watch in the App.
10.2 What if my watch fails to connect to the App?
A. Restart your phone's Bluetooth or your phone.
B. Check if the watch is connected, reset watch if not.
C. Check if the downloaded app name is correct. Uninstall and then reinstall the App, and retry scan.
D. Reinstalled app's data in Android system will be auto cleared, and its app background running
permission should be set again.
Grant the app permissions in the app prompts to make sure the App runs stably. The following
permissions are required:
① For Android system, turn on autostart permission in the System Settings or Mobile Butler or Security
Center.
② Add the App to whitelist.
③ Turn off battery optimization for the App.
④ Some devices need to turn off battery saver.

10.3 Why can't I use the Bluetooth Call function in the watch?
A. The watch connection is divided into App connection and Bluetooth call connection. Both should be
connected properly to enable Bluetooth Call function.
B. Swipe down the watch dial to see the "BLE" connection symbol which should be green when connected

10
to the App or gray when disconnected from the App. The watch's call pairing option should show as
paired.
C. Check the phone's System Settings > Bluetooth to see if the Call Watch is paired. Bluetooth Call
function only supports answering incoming calls or dialing frequent contacts via the watch, but does not
support music playback or other voice modes.
D. The Call Watch connection is normally off and only becomes active upon incoming calls or dialing.
Note that Bluetooth Call mode will lower the battery life.
10.4 Why is my watch's battery life reduced?
The most power-consuming parts of the watch are the display, vibration reminder, heart rate detection
and Bluetooth calling. Frequent or continuous use of the afore functions will reduce the watch's use
time.

11
FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 -Reorient or relocate the receiving antenna.
 -Increase the separation between the equipment and receiver.
 -Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
 -Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.