JAPANESE

INDUSTRIAL
STANDARD
Translated and Published by
Japanese Standards Association

JIS B 7184 : 2021

(JOMA/JSA)
Profile projectors

ICS 17.040.01
Reference number : JIS B 7184 : 2021 (E)

PROTECTED BY COPYRIGHT 11 S
B 7184 : 2021

Date of Establishment: 1954-03-15

Date of Revision: 2021-03-22
Date of Public Notice in Official Gazette: 2021-03-22
Investigated by: Japanese Industrial Standards Committee
Standards Board for ISO area

JIS B 7184 : 2021, First English edition published in 2022-03

Translated and published by: Japanese Standards Association

Mita MT Building, 3-13-12, Mita, Minato-ku, Tokyo, 108-0073 JAPAN

In the event of any doubts arising as to the contents,

the original JIS is to be the final authority.

 JSA 2022
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized
in any form or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.

Printed in Japan HT/HN

PROTECTED BY COPYRIGHT
 B 7184 : 2021

Contents

Page

1 Scope ································································································ 1
2 Normative references··········································································· 1
3 Terms and definitions ·········································································· 1
4 Specifications ····················································································· 2
4.1 General ····························································································· 2
4.2 Constructions and names of main components ········································· 2
4.3 Magnification error of projection lens when transmitted illumination is
used ································································································· 5
4.4 Magnification error of projection lens when reflected illumination is
used ································································································· 5
4.5 Resolving power of projection lens when transmitted illumination is
used ································································································· 5
4.6 Resolving power of projection lens when reflected illumination is used ········· 5
4.7 Concentricity error of reticle of rotating screen ········································· 6
4.8 Angle measurement error of rotating screen ············································ 6
4.9 Angular error of reticle of screen ··························································· 6
4.10 Image displacement due to magnification changes ···································· 6
4.11 Squareness between X-axis and Y-axis travelling directions of precision
cross-moving table ·············································································· 6
4.12 Measurement error of precision cross-moving table ··································· 6
4.13 Mass of object for performance assurance ················································ 7
5 Measuring method of each performance ·················································· 7
5.1 General ····························································································· 7
5.2 Temperature at measurement ······························································· 7
5.3 Measuring method of magnification error of projection lens when
transmitted illumination is used ··························································· 7
5.4 Measuring method of magnification error of projection lens when reflected
illumination is used ············································································ 7
5.5 Measuring method of resolving power of projection lens when transmit-
ted illumination is used ······································································· 9
5.6 Measuring method of resolving power of projection lens when reflected
illumination is used ············································································ 9
5.7 Measuring method of concentricity error of reticle of rotating screen ···········10
5.8 Measuring method of angle measurement error of rotating screen ··············11
5.9 Measuring method of angular error of reticle of screen ·····························11
5.10 Measuring method of image displacement due to magnification changes ······12
5.11 Measuring method of squareness between X-axis and Y-axis travelling

(i)
PROTECTED BY COPYRIGHT
B 7184 : 2021

directions of precision cross-moving table ·············································· 13

5.12 Measuring method of measurement error of precision cross-moving
table ······························································································· 13
6 Information to users ·········································································· 15
6.1 Marking on body and projection lens ····················································· 15
6.2 Information for users ········································································· 15
7 Validation of compliance with specifications ··········································· 15

(ii)
PROTECTED BY COPYRIGHT
 B 7184 : 2021

Foreword

This Japanese Industrial Standard has been revised by the Minister of

Economy, Trade and Industry through deliberations at the Japanese In-
dustrial Standards Committee as the result of proposal for revision of
Japanese Industrial Standard submitted by Japan Optical Measuring
Instruments Manufacturers' Association (JOMA)/Japanese Standards
Association (JSA) with a draft being attached, based on the provision of
Article 12, paragraph (1) of the Industrial Standardization Act applied
mutatis mutandis pursuant to the provision of Article 16 of the said Act.
This edition replaces the previous edition (JIS B 7184 : 1999), which has
been technically revised.
This JIS document is protected by the Copyright Act.
Attention is drawn to the possibility that some parts of this Standard
may conflict with patent rights, published patent application or utility
model rights. The relevant Minister and the Japanese Industrial Stand-
ards Committee are not responsible for identifying any of such patent
rights, published patent application or utility model rights.

(iii)
PROTECTED BY COPYRIGHT
Blank
JAPANESE INDUSTRIAL STANDARD JIS B 7184 : 2021

Profile projectors

1 Scope
This Japanese Industrial Standard specifies the requirements for the profile projec-
tors that measure the length, angle and profile of an object by magnifying and project-
ing the optical image of the object directly onto the screen, which consist of a projection
lens, screen, lighting equipment, precision cross-moving table and the body for the
support of these components.

2 Normative references
Part or all of the provisions of the following standards, through reference in this text,
constitute provisions of this Standard. The most recent editions of the standards (in-
cluding amendments) indicated below shall be applied.
JIS B 0641-1 Geometrical Product Specifications (GPS) — Inspection by meas-
urement of workpieces and measuring equipment — Part 1 : Deci-
sion rules for proving conformance or nonconformance with specifi-
cations
JIS B 0680 Geometrical Product Specifications (GPS) — Standard reference tem-
perature for geometrical product specification and verification
JIS B 7526 Squares
JIS B 7536 Electrical comparators
JIS B 7541 Standard scales
JIS R 6001-2 Bonded abrasives — Determination and designation of grain size
distribution — Part 2 : Microgrits
JIS Z 8120 Glossary of optical terms

3 Terms and definitions

For the purpose of this Standard, the following terms and definitions, and those giv-
en in JIS Z 8120 apply.
3.1
screen
glass panel to display the projected image of object
Note 1 to entry A screen equipped with a rotation mechanism and a reading
mechanism of rotation angle is called a rotating screen.
3.2
projection lens

PROTECTED BY COPYRIGHT