Type series booklet

8460.1215/7--10 DANAÏS 150C

High performance valve
with Nitrile/VITON elastomer

DN 80 to 800 (3” to 32”)

Pressure class: Class 150
Design in accordance with ASME B16.42 / B16.34

Applications • Actuation mounting plate in accordance with ISO 5211 and

NF E 29--402 standards.
• Marine,
• Flange facing: stock finish.
• Crude Oil, Product Oil, Oily Water.
• Connections according to EN 1092--1 PN 10 and 16, ASME B
16.5 class 150, ASME B16.47 class 150 series A, JIS
Working conditions B2220--5K, 10K,16K, JIS B2238 16K for DN > 600.
• The working temperature depends on the media and on the For other connections, please consult us.
material of the body and seat (see page 2). • Coating:
• The allowable pressure PS depends on the body material -- Steel and ductile iron bodies:
and the working temperature (see page 2). 3--coat system and in option 4--coat system.
• Operating under differential pressure ∆P= 16 Bar Max. • Marking in accordance with EN 19 standard.
• Vacuum service down to 0 absolute bar. • Type approval by ABS, CCS, DNV, Lloyd’s Register and BV.

Materials Standard variants

Refer to page 2. • Handle and manual actuator MR
• Hydraulic actuator ACTO, DYNACTO, ENNACTO
• Limit switches AMTROBOX R
Design
• One--piece wafer type body -- T1.
• One--piece full lug type body -- T 4. Remarks
• Two interchangeable seats: FKM or NBR. • Actuator selection 8460.15/.-90
• Double--eccentric kinematics. • Operating instructions 8450.810/.-10
• Upstream/downstream sealing: refer to page 3.
• Face--to--face in accordance with EN 558, ISO 5752 series
20 (except DN 350: ISO 5752 series 25) and API 609 table 2
Data to be supplied when ordering
standards. • DANAÏS 150C valve, in accordance with leaflet no.
8460.1215/.--10
• Size, materials for body and seat.
• Working conditions : nature of fluid, pressure, temperature.
• Actuation
 DANAÏS 150C

Materials
Body Temperature Code KSB
Ductile iron ASTM A 536 gr. 60--40--18 for T1 bodies --10 ° C to +100° C 3g
Carbon steel ASTM A 216 gr. WCC / 1.0619 for T1 and T4 bodies --10 ° C to +100° C 1
Shaft Code KSB
Stainless steel ASTM A 479 gr. 431 / 1.4057 --10 ° C to +100° C 6e
Disc Code KSB
Stainless steel ASTM A 351 gr. CF 8M / 1.4408 --10 ° C to +100° C 6
Aluminium bronze B148 C95400 --10 ° C to +100° C 2
AMRING seat Code KSB
FKM (VITON) --5 ° C to +100° C VD
NBR (Nitrile) --10 ° C to +100° C KD

Pressure / temperature
In pressure class 150 (ASTM materials), DANAÏS 150C valves meet:
-- ASME B16.42 class150 “Standard class” requirements for ductile iron valves
and
-- ASME B16.34 class 150 “Standard class” requirements for steel valves.

See values in the table below for the allowable working pressure according to the temperature:
Material Working pressure in bar at temperature ° C
Pressure class
Body 0 38 100
ASTM A 536 gr. 60--40--18 17,2 17,2 16,2
Class 150
ASTM A 216 gr. WCC 19,8 19,8 17,7

2
 DANAÏS 150C

Kinematics
The compression of the seating disc edge onto the seat is achieved by double--eccentric kinematics.
The axis of the shafts is off--set to valve axis and eccentric to pipe axis.
This design eliminates the possibility of friction during operation and, as a result ensures long lasting service while maintening tight
shut--off characteristics.
These tight shut--off characteristics conform to the most exacting requirements and standards.

Axis of shaft and disc

in open position

Travel of disc towards closure

Spherical diameter of disc closed

Axis of disc in open position

Axis of shaft
and disc
in closed position

Travel arc of
spherical center

Axis of disc in closed position

Preferential flow direction

Upstream/downstream sealing
The DANAÏS 150C valve conforms to the following sealing standards.
The DANAÏS 150C valve is a bi--directional valve with a preferential flow direction shown by an arrow (differential pressure direction
on the body).

Valve All seats type

EN 12266 category A
On liquid ISO 5208 category A
API 598
EN 12266 category A
ISO 5208 category A
On gas
API 598
ANSI / FCI 70.2 class VI

3
 DANAÏS 150C

Construction

DN 80 to 300 (2’’ to 12’’)

Flat shaft end Square shaft end

DN 80 to 200 DN 250 and 300
3’’ to 8’’ 10’’ and 12’’

970 13--21

561 310.3 VQ

901.1 412.1 VQ

412.3 VQ 68--4 VQ

412.2 VQ 01--48 VQ

553 Q

310.1 Q
Preferential direction

560.1 Q

560.2 Q

213

550

310.2 Q

100

Elastomer seat
FKM or NBR

144.1 O

72--3

932 O

O Spare parts kit for seat V Spare parts kit for sealing packing Q Spare parts for guiding

4
 DANAÏS 150C

DN 350 to 800 (14’’ to 32’’)

VQ 310.3 13--21

970
412.3 VQ

561
412.3 VQ
901.1
01--48 VQ

412.1 VQ
314

554
310.1 Q
f
213

940
Preferential direction
560.1 Q

550
553 Q

560.2 Q
543 Q

41--2 VQ
210
901.2
100

310.2 Q

176

Elastomer seat
FKM or NBR
144.1 O

72--3

914 O

O Spare parts kit for seat V Spare parts kit for sealing packing Q Spare parts for guiding

5
 DANAÏS 150C

Parts list
Item Designation DN Materials
Common parts
01--48 Sealing packing 80 to 800 PTFE
Ductile iron ASTM A 536 gr. 60--40--18
100 Body 80 to 800
Carbon steel ASTM A 216 gr. WCC
13--21 Extension 80 to 800 Ductile iron ASTM A 536 gr. 60--40--18
Ductile iron ASTM A 536 gr. 60--40--18
176 Bottom 350 to 800 Stainless steel A351 gr. CF8M / 1.4408
210 Shaft 350 to 800 Stainless steel ASTM A 479 gr. 431
213 Driving shaft 80 to 800 Stainless steel ASTM A 479 gr. 431
310.1 Upper plain bearing 80 to 800 Stainless steel + PTFE
310.2 Lower plain bearing 80 to 800 Stainless steel + PTFE
310.3 Extension plain bearing 80 to 800 Stainless steel +PTFE
314 Thrust washer 350 to 800 Stainless steel
41--2 Static joint 350 to 800 PTFE
412.1 O--Ring 80 to 800 VITON
412.2 O--Ring 80 to 800 VITON
412.3 O--Ring 80 to 800 VITON
543 Spacer bush 350 to 800 Stainless steel
Stainless steel ASTM A 351 gr. CF 8M / 1.4408
550 Disc 80 to 800
Aluminium bronze B148 C95400
Upper thrust insert 80 to 300
553 Stainless steel
Lower thrust insert 350 to 800
554 Foil 350 to 800 Stainless steel
560.1 Pin 80 to 800 Stainless steel
560.2 Pin 80 to 800 Stainless steel
561 Grooved nail 80 to 800 Stainless steel
68--4 Foil 80 to 300 Stainless steel
901.1 Hexagon--head screw 80 to 800 A4--70 stainless steel
901.2 Hexagon--head screw 350 to 800 A4--70 stainless steel
940 Key 350 to 800 Stainless steel ASTM A 479 gr. 431
970 Identity plate 80 to 800 Stainless steel
Valve with FKM (VITON) or NBR (Nitrile) seat
144.1 Seat 80 to 800 FKM (VITON) or NBR (Nitrile)
72--3 Tightening flange 80 to 800 Carbon steel
914 Cylindrical--head screw 650 to 800 Stainless steel
932 Inner ring 80 to 600 Stainless steel

6
 DANAÏS 150C

Wafer type body -- T1 -- Dimensions

DN 50 to 200 (2’’ to 8’’) DN 250 to 400 (10’’ to 16’’)

DN 80 to 200: flat end “s” machined in øz

DN ≥ 250: square end “s”

h3

h4

h1
d1

DN shown: 100 (4’’)

e3 d1
e1

h2 DN 450 (18’’) to DN 800 (32”) DN shown: 400 (16’’)

e4 e2
f
l1

DN shown: 450 (18’’)

d1

mm
Face Mounting plate
Square shaft
to according to Flat shaft end Disc clearance
DN NPS end
face ISO 5211
l1 d1 h1 h2 f n° h4 s øz h3 s h3 e1 e2 e3 e4
80 3 46 140 185 68 24 ,0 F05 10 11 14 24 59 13 61 15
100 4 54 180 200 82 27 ,0 F05 10 14 18 24 78 18 81 21
125 5 57 210 225 92 28 ,5 F07 12 14 18 30 99 27 103 30
150 6 57 235 240 117 28 ,5 F07 12 17 22 32 127 39 131 43
200 8 62 271 290 153 34 ,5 F10 15 19 25 35 177 62 175 59
250 10 70 323 335 182 38 ,0 F12 18 25 45 225 82 230 80
300 12 80 380 365 230 42 ,0 F12 18 27 45 265 96 266 98
350 14 92 449 435 307 47 ,5 F14 22 30 55 308 112 311 116
400 16 102 505 465 332 56 ,5 F14 22 36 55 359 133 358 132
450 18 114 570 530 371 61 ,0 F16 26 40 65 418 155 418 160
500 20 127 621 560 398 65 ,5 F16 26 40 65 455 167 455 175
550 22 154 635 634 422 73 F25 28 50 65 495 189 489 179
600 24 154 730 660 455 77 F25 28 50 65 546 201 546 211
650 26 165 740 720 511 82 ,5 F25 28 55 80 585 216 590 226
700 28 165 798 750 537 82 ,5 F25 28 60 80 625 237 630 247
750 30 190 867 780 569 95 F30 34 60 80 689 255 659 243
800 32 190 903 810 599 95 F30 34 70 110 722 274 728 286

7
 DANAÏS 150C

Full lug type body -- T4 -- Dimensions

DN 80 to 300 (2’’ to 12’’) DN 350 to 800 (14’’ to 32’’)

DN 80 to 200: flat end “s” machined in øz

DN ≥ 250: square “s”

h3

h4

h1

h2
e3 e1

e4 e2
f
l1
d1 d1

DN shown: 100 DN shown: 400

mm
Face Mounting plate
Square shaft
to according to Flat shaft end Disc clearance
DN NPS end
face ISO 5211
l1 d1 h1 h2 f n° h4 s øz h3 s h3 e1 e2 e3 e4
80 (3) 3 46 136 185 70 24 ,0 F05 10 11 14 24 59 13 61 15
80 (4 3 46 176 185 89 24 ,0 F05 10 11 14 24 59 13 61 15
100 4 54 206 200 104 27 ,0 F05 10 14 18 24 78 18 81 21
125 5 57 240 225 121 28 ,5 F07 12 14 18 30 99 27 103 30
150 (1) 6 57 267 240 135 28 ,5 F07 12 17 22 32 127 39 131 43
150 (2) 6 57 288 240 145 28 ,5 F07 12 17 22 32 127 39 131 43
200 (5) 8 62 310 290 157 34 ,5 F10 15 19 25 35 177 62 175 59
200 (6) 8 62 338 290 169 34 ,5 F10 15 19 25 35 177 62 175 59
250 10 70 410 335 205 38 ,0 F12 18 25 45 225 82 230 80
300 (7) 12 80 460 365 230 42 ,0 F12 18 27 45 265 96 266 98
300 (8) 12 80 470 365 235 42 ,0 F12 18 27 45 265 96 266 98
350 (3) 14 92 508 435 307 47 ,5 F14 22 30 55 308 112 311 116
350 (4) 14 92 529 435 307 47 ,5 F14 22 30 55 308 112 311 116
400 16 102 593 465 332 56 ,5 F14 22 36 55 359 133 358 132
450 (3) 18 114 620 530 371 61 ,0 F16 26 40 65 418 155 418 160
450 (4) 18 114 649 530 371 61 ,0 F16 26 40 65 418 155 418 160
500 20 127 705 560 398 65 ,5 F16 26 40 65 455 167 455 175
550 22 154 770 634 422 73,0 F25 30 50 65 495 189 489 179
600 24 154 822 660 455 77 ,0 F25 30 50 65 546 201 546 211
650 26 165 873 720 511 82 ,5 F25 30 55 80 585 216 590 226
700 28 165 895 750 537 82 ,5 F25 30 60 80 625 237 630 247
750 30 190 970 780 569 95,0 F30 30 60 80 689 255 659 243
800 32 190 1010 810 599 95 ,0 F30 30 70 110 722 274 728 286

(1) Mounting between flanges EN 1092--1 PN 10 and 16 -- 4 holes, ASME B16.5 cl.150 and JIS B2220--5K,10K
(2) Mounting between flanges EN 1092--1 PN 10 and 16 -- 8 holes and JIS B2220--16 K
(3) Mounting between flanges ASME B16.5 cl.150
(4) Mounting between flanges EN 1092--1 PN 10 and 16 and JIS B2220--5K, 10K and 16K
(5) Mounting between flanges EN 1092--1 PN 10 and 16 and ASME B16.5 cl.150 and JIS B2220--5K, 10K
(6) Mounting between flanges JIS B2220--16K
(7) Mounting between flanges EN 1092--1 PN 10 and ASME B16.5 cl.150
(8) Mounting between flanges EN 1092--1 PN 16 and JIS B2220--5K, 10K and 16K

8
 DANAÏS 150C

Operating torques

Nm
Preferential direction Non preferential direction
DN NPS Differential pressure ∆P in bar Differential pressure ∆P in bar
6 10 16 6 10 16
80 3 30 40 40 30 30 40
100 4 50 50 60 40 50 60
125 5 70 80 90 60 70 90
150 6 100 110 140 90 110 140
200 8 160 180 230 150 190 240
250 10 290 340 440 270 350 470
300 12 400 470 620 380 500 680
350 14 610 720 970 570 780 1 080
400 16 820 980 1 340 780 1 060 1 490
450 18 1 130 1 370 1 880 1 080 1 480 2 090
500 20 1 380 1 680 2 310 1 320 1 820 2 570
550 22 1 820 2 220 3 100 1 740 2 450 3 510
600 24 2 210 2 720 3 820 2 130 3 000 4 320
650 26 2 560 3 180 4 480 2 970 4 050 5 660
700 28 2 900 3 630 5 130 3 810 5 090 7 000
750 30 3 600 4 490 6 395 4 530 6 390 8 950
800 32 4 300 5 350 7 660 5 460 7 410 10 340

* The safety coefficient to define the adaptated actuator is included in the torque value.

Hydraulic characteristics
Flow coefficient in fully open position
DN NPS Zeta
Kv0 Cv0
80 3 190 220 1,81
100 4 340 400 1,38
125 5 600 700 1,08
150 6 980 1 150 0,84
200 8 1 850 2 150 0,75
250 10 3 350 3 880 0,56
300 12 4 870 5 650 0,55
350 14 7 070 8 200 0,48
400 16 10 350 12 000 0,38
450 18 12 500 14 500 0,42
500 20 15 090 17 500 0,44
550 22 18 750 21 750 0,42
600 24 22 410 26 000 0,41
650 26 24 655 28 600 0,47
700 28 26 900 31 200 0,53
750 30 29 675 34 423 0,57
800 32 38 000 44 100 0,45

9
 DANAÏS 150C

Standard variants
ACTO hydraulical actuator ACTO hydraulical actuator
+ AMTROBOX R

MR manual actuator MR manual actuator

+ AMTROBOX R

CR handle

10
 DANAÏS 150C

Connections
The table below defines the possible connections. Please consult us for other connections.

Wafer type body -- T1 --

EN 1092--1 ASME JIS B2220 JIS B2238
DN NPS B16.5 cl.150 DN ≤ 600
PN 10 PN 16 5K 10K 16K 16K
B16.47 series A DN > 600
80 3      
100 4      
125 5      
150 6      
200 8      
250 10      
300 12      
350 14      
400 16      
450 18 O O O O O O
500 20 O O O O O O
550 22 + + O O O
600 24 O O O O O O
650 26 + + O O O O O
700 28 O O O O O O O
750 30 + + O O O O O
800 32 O O O O O O O

Lug type body -- T4 --

EN 1092--1 ASME JIS B2220 JIS B2238
DN NPS B16.5
B16 5 cl.150
cl 150 DN ≤ 600
PN 10 PN 16 B16.47 series A DN > 600 5K 10K 16K 16K
80 3      
100 4      
125 5      
150 6      
200 8      
250 10      
300 12      
350 14      
400 16      
450 18      
500 20      
550 22 + +   
600 24      
650 26 + +     
700 28       
750 30 + +     
800 32       

 Connection allowed O Connection allowed -- Threaded holes at shaft passages

The standard does not exist + According to ISO 2084 standard

Face--to--face dimensions
The face--to--face dimensions of DANAÏS 150C valve are in accordance with the following standards.
DN NPS Wafer type and lug type
80 to 300 and 400 to 600 3” to 12” and 16” to 24” EN 558--1 series 20 ; API 609 table 2 class 150 and ISO 5752 series 20
350 14” EN 558--1 series 20 ; API 609 table 2 class 150 and ISO 5752 series 25
650 to 800 26” to 32” EN 558--1 series 20 ; API 609 table 2 class 150 and ISO 5752 series 20

11
 DANAÏS 150C

End of line and downstream dismantling

Use as end of line and downstream dismantling of the standard valves T4 at room temperature for DN and the differential pres-
sure (∆PS) are defined hereafter.
End of line and downstream dismantling not allowed for wafer type body -- T1.

Steel valves:
Gas or liquids* Liquids
DANAïS 150C
Hazardous Non hazardous Hazardous Non hazardous
All DN: All DN: All DN:
class 150 All DN: on request
∆PS = 15 bar max. ∆PS = 15 bar max. ∆PS = 15 bar max.

Ductile iron valves:

Gas or liquids* Liquids
DANAïS 150C
Hazardous Non hazardous Hazardous Non hazardous
All DN: All DN: All DN:
class 150 All DN: on request
∆PS = 12 bar max. ∆PS = 12 bar max. ∆PS = 12 bar max.

* Liquids having a vapour pressure at the maximum allowable temperature of not more than 0,5 bar above atmospheric
pressure (1013 mbar).
∆PS Differential pressure

NB: A valve fitted at the end of a pipe with a blind flange downstream is not to be considered as an end of pipe service.

Downstream dismantling End of line

< <

12
 DANAÏS 150C

Flange sealing
Wafer type body -- T1 Full lug type body -- T4

Max. external dia.

Max. internal dia.
Min. external dia.

Min. internal dia.

Min. internal dia.
mm
Flange sealing
Min. area Max. area Connections
Max. Min. Min Max. external dia.
internal external internal Wafer Full lug
DN NPS dia. dia. dia. T1 T4
type type body
126,0 ASME B16.5 cl150
80 3 101 2
101,2 116 6
116,6 91 0
91,0 125 0
125,0
131,0 PN 10/16 -- JIS 5K/10K/16K
100 4 126,6 142,6 117,0 154,0 156,5
125 5 153,6 169,6 144,0 183,0 185,0 All
150 6 180,6 199,1 171,0 214,0 215,0
269,0 PN 10 -- ASME B16.5 cl150
200 8 231 5
231,5 253 5
253,5 222 0
222,0 267 0
267,0
265,0 PN 16 -- JIS 5K/10K/16K
250 10 286,9 305,5 275,0 321,5 323,0 All
380,0 PN 10/16 -- ASME B16.5 cl 150
300 12 339 3
339,3 358 5
358,5 327 0
327,0 377 0
377,0
388,0 JIS 5K/10K/16K
412,0 ASME B16.5 cl 150
350 14 374 6
374,6 400 0
400,0 359 0
359,0 411 5
411,5
428,0 PN 10/16 -- JIS 5K/10K/16K
400 16 425,9 452,0 410,0 467,5 469,0
PN 10/16,
10/16
450 18 478,5 510,0 461,0 530,5 532,5
ASME B16.5
B16 5 cl.150
cl 150, JIS 5K/10K/16K
500 20 528,0 562,0 512,0 581,5 583,5
550 22 584,0 620,0 556,0 635,0 635,0 JIS 5K/10K/16K PN 10/16
600 24 635,0 671,0 614,0 689,5 691,5
650 26 673,0 705,0 654,0 740,0 747,0
PN 10/16,
10/16
700 28 722,0 756,0 704,0 794,0 794,0
ASME B16.47
B16 47 cl.150
cl 150 series A,
A JIS 5K/10K/16K
750 30 776,0 812,0 754,0 853,0 850,0
800 32 830,0 864,0 804,0 899,0 899,0

Note: the use of spiral--wound gaskets according to ISO 7483 -- PN 10 to 25 is recommended.

13
 DANAÏS 150C

Wafer type body -- T1 -- Bolting

The bolting is not supplied j Y
L A
j l1 j e
B
e e
f f

øM

Screws at shaft passages (DN 450)

L = l1 + 2e + 2f + 2j A max. = e + Y + j
L : tie--rod length A max.: screw length
l1 : valve face--to--face e : flange thickness
e : flange thickness j : flange gasket thickness
f : tie--rod overlength Y : screw max. implantation
j : flange gasket thickness B : min. threaded lenght B > A--e

ASME B16.5 cl.150 for DN ≤ 600

EN 1092--1 PN 10 EN 1092--1 PN 16
ASME B16.47 cl.150 series A for DN > 600
Weight
Tie--rod ** Screw A2 Tie--rod* Screw A2 Tie--rod* Screw A2
DN NPS l1 d1 øM f Qty Y Qty* øM f Qty Y Qty* UNC f Qty Y Qty*
80 3 46 140 M16 20 8 M16 20 8 5/8’’ 20 4 4,5
100 4 54 180 M16 20 8 M16 20 8 5/8’’ 20 8 6,4
125 5 57 210 M16 20 8 M16 20 8 3/4’’ 24 8 9,7
150 6 57 235 M20 24 8 M20 24 8 3/4’’ 24 8 12,7
200 8 62 271 M20 24 8 M20 24 12 3/4’’ 24 12 22,5
250 10 70 323 M20 24 12 M24 29 12 7/8’’ 29 12 34,0
300 12 80 380 M20 24 12 M24 29 12 7/8’’ 29 12 48,8
350 14 92 449 M20 24 16 M24 29 16 1’’ 32 12 64,5
400 16 102 505 M24 29 16 M27 32 16 1’’ 32 16 89,0
450 18 114 570 M24 29 16 27 4 M27 32 16 26 4 1’’1/8 35 12 40 4 133,5
500 20 127 621 M24 29 16 35 4 M30 35 16 34 4 1’’1/8 35 16 33 4 168,0
550 22 154 635 M27 32 16 42 4 M30 35 16 42 4 8 218,0
600 24 154 730 M27 32 16 40 4 M33 38 16 48 4 1’’1/4 38 16 48 4 270,5
650 26 165 740 M27 32 20 39 4 M33 38 20 35 4 1”1/4 38 20 36 4 550,0
700 28 165 798 M27 32 20 39 4 M33 38 20 36 4 1’’1/4 38 24 30 4 400,0
750 30 190 857 M30 35 20 47 4 M33 38 20 46 4 1”1/4 38 24 40 4 480,0
800 32 190 903 M30 35 20 47 4 M36 42 20 44 4 1’’12 45 24 36 4 550,0

JIS B2220--16K for DN ≤ 600

JIS B2220--5K JIS B2220--10K
JIS B2238--16K for DN > 600
Weight
Tie--rod* Screw A2 Tie--rod** Screw A2 Tie--rod** Screw A2
DN NPS l1 d1 øM f Qty Y Qty* øM f Qty Y Qty* øM f Qty Y Qty*
80 3 46 140 M16 20 4 M16 20 8 M20 24 8 4,5
100 4 54 180 M16 20 8 M16 20 8 M20 24 8 6,4
125 5 57 210 M16 20 8 M20 24 8 M22 26 8 9,7
150 6 57 235 M16 20 8 M20 24 8 M22 26 12 12,7
200 8 62 271 M20 24 8 M20 24 12 M22 26 12 22,5
250 10 70 323 M20 24 12 M22 26 12 M24 29 12 34,0
300 12 80 380 M20 24 12 M22 26 16 M24 29 16 48,8
350 14 92 449 M22 26 12 M22 26 16 M30x3 35 16 64,5
400 16 102 505 M22 26 16 M24 29 16 M30x3 35 16 89,0
450 18 114 570 M22 26 12 40 4 M24 29 16 27 4 M30x3 35 16 27 4 133,5
500 20 127 621 M22 26 16 37 4 M24 29 16 35 4 M30x3 35 16 41 4 168,0
550 22 154 635 M24 29 16 42 4 M30 35 16 42 4 M36x3 42 16 42 4 218,0
600 24 154 730 M24 29 16 50 4 M30 35 20 34 4 M36x3 42 20 36 4 270,5
650 26 165 740 M24 29 20 39 4 M30 35 20 36 4 M36x3 42 20 38 4 350,0
700 28 165 798 M24 29 20 39 4 M30 35 20 37 4 M39x3 45 20 37 4 400,0
750 30 190 857 M30 35 20 47 4 M30 35 20 47 4 M39x3 45 20 49 4 480,0
800 32 190 903 M30 35 20 47 4 M30 35 24 39 4 M45x3 52 20 46 4 550,0

* Quantity of nuts = quantity of tie--rods x 2 ** Quantity of screws by face

Does not exist in the standard

14
 DANAÏS 150C

Full lug type body -- T4 -- Bolting

The bolting is not supplied.
A2
j X B
A1
e
B

e Y
j
Screws at shaft passages
A1 max. = e + X + j A2 max. = e + Y + j
A1 max.: screw length A2 max.: screw length
e : flange thickness e : flange thickness
j : flange gasket thickness j : flange gasket thickness
X : screw max. implantation Y : screw max. implantation
B : min. threaded lenght B > A1--e B : min. threaded lenght B > A2--e

ASME B16.5 cl.150 for DN ≤ 600

EN 1092--1 PN 10 (1) EN 1092--1 PN 16 (1)
ASME B16.47 cl.150 series A for DN > 600
Weight
Screw A1 Screw A2 Screw A1 Screw A2 Screw A1 Screw A2
DN NPS l1 d1 øM X Qty* Y Qty* øM X Qty* Y Qty* d1 UNC X Qty* Y Qty*
80 3 46 136 M16 20 8 M16 22 8 7,4
80 3 46 136 5/8” 22 8 6,0
100 4 54 206 M16 24 8 M16 24 8 206 5/8” 26 8 10,2
125 5 57 240 M16 24 8 M16 24 8 240 3/4“ 27 8 14,6
150 6 57 267 M20 27 8 M20 27 8 267 3/4” 27 8 17,2
200 8 62 310 M20 30 8 M20 30 12 310 25,5
200 8 62 338 338 3/4” 34 12 28,5
250 10 70 410 M20 30 12 M24 34 12 410 7/8” 36 12 44,0
300 12 80 460 M20 30 12 M24 36 12 460 64,8
300 12 80 470 470 7/8” 33 16 68,8
350 14 92 508 M20 30 16 M24 35 16 97,5
350 14 92 529 529 1” 37 16 87,7
400 16 102 593 M24 34 16 M27 38 16 593 1” 38 16 130,0
450 18 114 620 M24 32 20 M27 40 16 26 4 620 178,5
450 18 114 649 649 1”1/8 40 16 163,5
500 20 127 705 M24 35 20 M30 39 20 705 1”1/8 39 20 218,0
550 22 154 770 M27 54 16 42 4 M30 60 16 42 4 283,0
600 24 154 822 M27 40 20 M33 48 20 822 1”1/4 48 20 355,0
650 26 165 875 M27 46 20 39 4 M33 55 20 35 4 1049 1”1/4 55 24 36 4 550,0
700 28 165 895 M27 46 20 39 4 M33 55 20 36 4 1049 1”1/4 55 24 30 4 550,0
750 30 190 950 M30 50 20 47 4 M33 55 20 46 4 970 1”1/4 55 24 40 4 650,0
800 32 190 1010 M30 50 20 47 4 M36 59 20 44 4 1049 1”1/2 64 24 36 4 750,0

JIS B2220--16K for DN ≤ 600

JIS B2220--5K JIS B2220--10K
JIS B2238--16K for DN > 600
Weight
Screw A1 Screw A2 Screw A1 Screw A2 Screw A1 Screw A2
DN NPS l1 d1 øM X Qty* Y Qty* øM X Qty* Y Qty* øM X Qty* Y Qty*
80 3 46 136 M16 20 4 M16 22 8 M20 22 8 6,0
100 4 54 206 M16 24 8 M16 24 8 M20 26 8 10,2
125 5 57 240 M16 27 8 M20 27 8 M22 27 8 14,6
150 6 57 267 M16 27 8 M20 27 8 17,2
150 6 57 288 M22 27 12 20,0
200 8 62 310 M20 30 8 M20 30 12 M22 30 12 25,5
250 10 70 410 M20 33 12 M22 33 12 M24 34 12 44,0
300 12 80 460 M20 33 12 M22 33 16 M24 36 16 64,8
350 14 92 508 M22 31 12 M22 31 16 M30x3 41 16 87,7
400 16 102 593 M22 34 16 M24 34 16 M30x3 40 16 130,0
450 18 114 620 M22 40 16 M24 32 20 M30x3 40 16 27 4 163,5
500 20 127 705 M22 48 16 37 4 M24 35 20 M30x3 42 16 218,0
550 22 154 770 M24 48 16 42 4 M30 60 16 42 4 M36x3 72 16 42 4 283,0
600 24 154 822 M24 50 16 50 4 M30 38 24 M36x3 46 20 36 4 355,0
650 26 165 875 M24 41 20 39 4 M30 50 20 36 4 M36x3 59 20 38 4 510,0
700 28 165 895 M24 46 20 39 4 M30 50 20 37 4 550,0
750 30 190 950 M30 50 20 47 4 M30 50 20 47 4 Please, consult us 605,0
800 32 190 1045 M30 50 20 47 4 M30 50 24 39 4 750,0
* Quantity of screws by face

15
 DANAÏS 150 C

Product features -- to our customer’s benefit

Mounting plate according to

ISO 5211 standard

O--rings tightness

•
•
Anti blow--out of the shaft
•
Seat design reinforced tightness
when pressure increases

and may be amended without notice.

• Easy to change

This leaflet is not contractual

• Long life time
Plain bearings ensuring a perfect
guiding of the shaft

Blind valve bottom to maintain the

integrity and the homogeneity of the
resistance of the shell under pressure
Wafer type:
Ribs making mounting
02.08.12

• •
easier between all types
of flanges

Face to face in accordance with •

EN 558 and API 609 standards •
8460.1215/7--10

KSB S.A.S.
4, allée des Barbanniers • 92635 Gennevilliers Cedex (France)
Tel.: +33 1 41 47 75 00 • Fax: +33 1 41 47 75 10 • www.ksb.com