Risk Rating Matrix in Safety.

Contents
1. Understanding Risk Matrix in Safety
2. How to create a Risk Matrix

Intro

A Risk Rating Matrix in Safety is a tool used to assess the level of risk associated
with certain activities or tasks. It is an important tool for safety professionals, as
it helps to identify potential risks and hazards associated with various activities.
By assigning a numerical value to each risk level, the matrix can be used to assign
a Risk Rating to each activity, allowing safety professionals to understand the
potential consequences and take appropriate action to mitigate the risks. In this
blog post, we will be discussing Risk Rating in Safety and the benefits of using a
Risk Rating Matrix to help improve safety in the workplace.
Understanding Risk Matrix in Safety

In safety management, a risk matrix is a useful tool that helps assess the severity
of a risk and determine the appropriate response. It’s a graphical representation
of a risk assessment that categorizes risks into levels of severity based on
likelihood and consequence.

A risk matrix typically comprises two axes - the likelihood of an event occurring,
and the consequence if it does occur. The likelihood is often expressed on a scale
from 1 to 5 or 1 to 10, with 1 being the least likely and 5 or 10 being the most
likely. The consequence is typically expressed on a similar scale, with 1
representing the least severe consequence and 5 or 10 representing the most
severe consequence.

Once the likelihood and consequence are plotted on the matrix, they’re combined
to determine the level of risk. For example, if an event has a high likelihood of
occurring and a severe consequence, it will be placed in the high-risk category. If
an event has a low likelihood of occurring and a minor consequence, it will be
placed in the low-risk category.

By using a risk matrix, safety professionals can prioritize risks and determine the
appropriate course of action to take in order to mitigate them. The use of a risk
matrix is particularly valuable in workplaces where hazards are complex and
varied, such as construction sites, manufacturing facilities, and oil and gas
operations.

In the next section, we’ll look at how to create a risk matrix.

How to create a Risk Matrix

A Risk Matrix is a valuable tool used to identify, assess, and prioritize risks in
safety management. A Risk Matrix typically consists of a table that has two axes,
one for the likelihood of an event occurring, and the other for the severity of its
potential consequences.

Here are the steps for creating a Risk Matrix:

Step 1: Define the risk events

Firstly, it's important to identify the potential risks that can occur within your
organization. The risk events should be listed down and clearly defined.

Step 2: Determine the likelihood

The next step is to determine the likelihood of each risk event occurring. The
likelihood can be rated on a scale of low, medium, and high. It's important to
assess the likelihood objectively, based on historical data, expert opinion, and
current trends.

Step 3: Determine the consequences

The severity of consequences resulting from the risk event should be assessed on
a similar scale. Consequences may be physical, financial, or reputational. The
consequence rating can be based on expert judgment, organizational values, or
legal and regulatory requirements.

Step 4: Create the Risk Matrix

Once the likelihood and consequences are assessed, the Risk Matrix can be
created. It is essential to determine the number of levels for both the likelihood
and the consequences scale, typically ranging from low to high, with an equal
number of steps. The likelihood scale is placed on one axis, while the
consequences scale is placed on the other axis.

Step 5: Assign Risk Rating

Each risk event is then plotted on the matrix according to its likelihood and
severity rating. A Risk Rating is assigned to each risk event based on the
coordinates on the matrix. The Risk Rating indicates the level of priority to be
given to the risk event. For example, high likelihood and high consequence risks
will require immediate attention and action.

Importance of Risk Rating

The risk rating in safety is essential in identifying potential hazards and

determining the level of risk associated with them. By assessing the probability
and severity of an incident, you can prioritize safety measures to ensure the
safety of everyone involved.

For instance, if you're managing a construction project, identifying the most

significant hazards and assessing their level of risk can help you allocate your
resources accordingly. This will ensure that you take measures to eliminate or
minimize the risks associated with high-risk activities.

The importance of risk rating cannot be overstated when it comes to protecting

employees from workplace injuries and accidents. It is crucial to understand that
not all risks are equal, and some pose a greater threat to the workforce than
others. Risk rating helps in differentiating these risks and prioritizing measures to
manage them effectively.

Moreover, risk rating is beneficial in decision-making. Once you identify potential

hazards and assess their level of risk, you can decide which hazards pose the most
significant threat to safety and require immediate attention. You can also develop
a plan for addressing these hazards by identifying control measures to eliminate
or reduce the risks.

Finally, risk rating in safety helps you comply with legal and regulatory
requirements. Regulatory authorities require organizations to have robust risk
assessment procedures in place to protect their employees' safety and well-being.
By conducting risk assessments and developing a risk rating matrix, you
demonstrate your commitment to safety and comply with regulations.
Factors affecting Risk Rating

The Risk Rating of a hazard or a situation is not a static number. Rather, it is a

constantly changing value that is influenced by several factors. Some of these
factors are:

1. Severity: The severity of a hazard is one of the primary factors affecting the Risk
Rating. The more severe the hazard, the higher the Risk Rating.

2. Likelihood: The likelihood of a hazard occurring is another significant factor that

affects the Risk Rating. The more probable a hazard is, the higher the Risk Rating.

3. Exposure: The level of exposure to the hazard is also an important factor

affecting the Risk Rating. The greater the number of people or the frequency of
exposure to a hazard, the higher the Risk Rating.

4. Control Measures: The effectiveness of the control measures put in place to

mitigate a hazard is another factor that can affect the Risk Rating. If the control
measures are not effective or not in place, the Risk Rating can increase.

5. Resources: The resources available to address a hazard can also impact the Risk
Rating. If the resources are limited or not adequate, the Risk Rating may increase.

6. Regulatory Requirements: The regulatory requirements and standards that

apply to a hazard can also impact the Risk Rating. Failure to comply with the
regulations can increase the Risk Rating.

It is essential to consider these factors and regularly review the Risk Rating to
ensure that the control measures in place remain effective and that any changes
in the factors do not increase the risk to an unacceptable level.

Benefits of using a Risk Matrix & Risk Rating in Safety

Using a Risk Matrix and Risk Rating in Safety can bring numerous benefits to
organizations and individuals in managing risk. Here are some of the advantages
of incorporating these tools into your safety program:
1. Enhance Risk Assessment Accuracy: With a Risk Matrix, organizations can
evaluate the potential risks of any particular hazard more accurately. It allows for
a more comprehensive approach that considers the likelihood of an incident
happening, and its potential severity.

2. Prioritize Risks: Risk Matrix enables organizations to prioritize risks and decide
which risks require immediate attention, allowing for more efficient allocation of
resources and reducing costs.

3. Easy-to-Understand Visual Aid: Risk Matrices can simplify complex information

into a single, easy-to-understand visual aid, making it easier for people to
communicate risk levels to others.

4. Improved Communication: When risks are communicated effectively to

employees and management, everyone can make more informed decisions on
how to avoid, prevent, and manage them.

5. Compliance with Safety Standards: Organizations can use a Risk Matrix and
Risk Rating to ensure they comply with safety standards, which may be required
by government or industry regulators.

6. Continuous Improvement: By incorporating Risk Matrix into safety

management, organizations can continue to refine their approach over time to
improve the effectiveness of their safety programs.

Overall, using a Risk Matrix and Risk Rating in safety can help organizations
prioritize risks, communicate effectively, comply with safety standards, and
continuously improve their safety programs. By identifying potential hazards
early, organizations can take appropriate steps to reduce risk, protect their
employees, and maintain their reputation for safe work practices.

Best practices for using a Risk Matrix & Risk Rating in Safety

While a Risk Matrix and Risk Rating can be powerful tools for managing safety
risks, they must be used correctly to be effective. Here are some best practices to
follow:
1. Use accurate data: To create an effective risk matrix, it's essential to have
accurate and reliable data. Collect data from multiple sources to ensure that the
matrix reflects the real risks present in your organization.

2. Involve all stakeholders: Make sure that all stakeholders, including employees,
supervisors, and management, are involved in the process of creating the Risk
Matrix. This will ensure that everyone has a voice in the risk assessment process,
and the resulting matrix will be more effective.

3. Establish clear risk criteria: Establishing clear risk criteria is essential to ensure
consistency when rating risks. Develop a list of criteria that defines what
constitutes a low, moderate, or high-risk situation, and make sure that everyone
involved understands these criteria.

4. Regularly review and update the matrix: Risk matrices should be updated
regularly to ensure that they remain current and effective. Consider conducting
periodic reviews, such as every six months or annually, to ensure that the matrix
accurately reflects changes in the organization's risk profile.

5. Provide training: Provide training to employees on how to use the risk matrix
and understand the risk ratings. This will help ensure that everyone understands
how to use the matrix and that they can contribute effectively to the risk
management process.

6. Use the risk matrix in decision-making: Use the Risk Matrix to inform decision-
making. For example, if a high-risk situation is identified, use the matrix to
prioritize actions and allocate resources effectively.

7. Integrate with other safety management tools: Integrate the risk matrix with
other safety management tools, such as hazard reporting systems or incident
investigation processes. This will ensure that the matrix is used consistently
throughout the organization.

By following these best practices, you can ensure that the Risk Matrix and Risk
Rating are effective tools for managing safety risks in your organization.