Open ENSTO Low Voltage Overhead Line Equipment

Accessories for Low Voltage
Distribution Networks
Tested efficiency
Ensto in short
Ensto is a family business and international cleantech compa-
ny specializing in the development, manufacture and market-
ing of electrical systems and supplies for the distribution of
electrical power as well as electrical applications. We are com-
mitted to lasting sustainable development and our goal is to
be the world’s leading company in green energy efficiency
and distribution. Our products are environmentally friendly,
energy efficient and leave a minimum carbon footprint. Ensto
has three key business units: Ensto Utility Networks, Ensto In-
dustrial Solutions, and Ensto Building Technology.
A wide selection of reliable and Expert in testing Ensto Solutions for low voltage
durable products Our products are tested according to the overhead lines
Ensto Utility Networks offers comprehensive toughest national and international stand- Ensto has developed solutions and integrated
solutions for overhead and underground dis- ards - actually, we test even beyond standard product packages for various low voltage ABC
tribution of electricity. Our products are built requirements. Ensto has fully equipped and (Aerial Bundled Cable) systems since the early
to withstand the toughest conditions on earth calibrated testing laboratory in-house, where 1960’s. These solutions are designed to meet
and are tested according to international both components and products are continu- the local conditions and requirements taking
standards. Durable products mean uninter- ously tested. We also work in cooperation with into account the urban, rural, forested areas,
rupted service, lower maintenance costs and, many international test laboratories and use density of population, climatic conditions,
above all, satisfied customers. well-known external laboratories for certifica- available investments etc. All accessories have
tion testing. been developed and tested in close collabo-
ration with electricity power companies. Our
Production assortment incudes special products required
Ensto Utility Networks offers accessories and
by each system and a wide range of products
solutions for:
for all systems.
• Low voltage overhead lines focused on
Ensto´s low voltage solutions cover:
Aerial Bundled Cable Systems
• Four Core system (page 7)
• Medium voltage overhead lines (for bare
• Insulated Messenger Wire system
and covered conductor lines)
(IMWS) (page 9)
• Low and medium voltage underground
• Uninsulated Messenger Wire system
cable networks
(AMKA) (page 11)
• Power quality
• Network automation
Content
Ensto in Short 2
Ensto Solutions for Low Voltage
Overhead Lines 5
Properties and Typical Values of LV ABC 5
Four Core System 7
IMWS System 9
Uninsulated Messenger
Wire System (AMKA) 11
Connectors 13
Copper Bars 14
Bird Protectors 14
Cable Lugs, Earthing Connectors
and Earthing Bars 14
Pole Fuse Switch Disconnectors 14
Lamp Post Fixtures 14
Fixing Materials for Pole
and Wall Mount 15
Suspension Hooks 15
Stay Wire Accessories and Pole
Base Reinforcers 15
Tools 15
Product Information 16
4
Properties and Typical Values of LV ABC (Aerial Bundle Cable)
Overhead Line Systems Realized with Ensto Fittings
CHARACTER / CRITERIA FOUR CORE SYSTEM INSULATED NEUTRAL MESSENGER WIRE UNINSULATED NEUTRAL MESSENGER WIRE
Description Four equal aluminium alloy conductors Insulated aluminium phase conductors. Insulated aluminium phase conductors.
including phase – and neutral conductors. Insulated aluminium alloy messenger Bare aluminium alloy messenger wire,
The cable can also have separate conduc- wire, which is also the neutral conductor. which is also the neutral conductor.
tors for street lighting. The cable can also have separate The cable can also have separate
conductors for street lighting. conductors for street lighting.
Minimum breaking loads for the 4x35 mm2 = 22.4 kN 3x35 mm2 + 54.6 mm2 = 16.0 kN 3x35 mm2 + 50 mm2 = 14.7 kN
conductor 4x50 mm2 = 33.2 kN 3x70 mm2 + 54.6 mm2 = 16.0 kN 3x70 mm2 + 95 mm2 = 27.9 kN
4x70 mm2 = 45.3 kN 3x120 mm2 + 70.0 mm2 = 17.7 kN 3x120 mm2 + 95 mm2 = 27.9 kN
4x95 mm2 = 60.8 kN
4x120 mm2 = 75.2 kN
Sharing of mechanical load Mechanical load applied in all conductors. Messenger wire carries all mechanical load. Messenger wire carries all mechanical load.
Tensile strength of wires of conductor All conductors 160 N/ mm2 Neutral 300 N/ mm2 Neutral 300 N/ mm2
(N/mm2) Phases 120 N/ mm2 Phases 120 N/ mm2
Risk of neutral breaking under unexpected The neutral is unlikely to break alone, The neutral may break alone, if not The neutral is reinforced, but it may
loads like falling trees etc. if the installation is made properly. provided with weak links. Risk to break alone. Risk to personnel and
High mechanical strength. personnel and apparatus due to risen apparatus due to risen phase voltage
phase voltage and high potential in and high potential in neutral, if the
neutral, if the earthing is not made earthing is not made properly.
properly.
Live line work No special requirements No special requirements No special requirements. Uninsulated
neutral may have touch voltage in poor
earthing conditions. Proper earthing is
essential.
Connectors Same connector can be used for all cores. Sometimes different connectors for Sometimes different connectors for
phases and neutral. phases and neutral.
Risk of corrosion in the neutral Reduced risk Reduced risk Potential risk in extreme climatic
conditions.
Installation methods No special tools or methods. No special tools or methods. No special tools or methods.
Suspension clamps with incorporated Pulleys are needed. Pulleys are needed.
pulleys availabale. Economical fi ttings
5
6
Four Core System
Since the 1970’s the Four Core System has been adapted in
many Central and North European countries e.g. in Austria,
Germany, Ireland, United Kingdom, Poland, Hungary, Russia
and Scandinavia. The four insulated conductors that share the
tensile load equally, have a size range of 16 to 185 mm2. They
are made of aluminum with a relatively high tensile strength.
Therefore, the breaking load of the cable is relatively high, as
well. Insulation of the cores is typically made of XLPE or PE.
The cable can be supplied with one or two insulated conduc-
tors for street lighting. Read more about the Ensto solutions
for four core systems on pages 16–18.
Ensto Four Core Products

in Norway
Trollfjord Kraft As has used Ensto solutions
from the beginning of the EX cable. The com-
pany has been extremely pleased with Ensto’s
Four Core products as their reliability has been
proven in practice many times. Moreover, the
installers have given good feedback because
the products are so easy to install which, in
fact, saves their time and energy.
The company has also had an easy-going re-

lationship with the Ensto staff, and the infor-
mation flow has been very sufficient. Trollfjord
Kraft As are very satisfied with Ensto’s solu-
tions and have not had any problems with
Ensto’s products.
7
8
Insulated Messenger Wire
System (IMWS)
An insulated messenger wire cable consists of one to five

black, weather resistant, high density or cross-linked, polyeth-
ylene insulated conductors twisted around an insulated alu-
minum alloy messenger (typical tensile strength 300 N/mm2).
The Ensto portfolio for Insulated Messenger Wire System,
Ensto IMWS, includes connectors, tension and suspension
clamps, pole fuse switches and various pole support and
earthing accessories. Our competitiveness is based on long-
term customer relations resulting in safe systems for the most
demanding circumstances using durable products. We take
care of our customers and offer the best solutions on an in-
dividual basis. Ensto solutions for Insulated Messenger Wire
System are covered on pages 19–20.
Regular deliveries to Surinam

Surinam has adopted the advanced distribu-
tion network model with ABC cables in low
voltage lines as a national standard. Thus, the
old lines are gradually being replaced by new
ABC lines.
For over a decade, one of Ensto’s main cus-
tomers in Surinam has been energy supply
company EBS N.V. Moreover, Hedi Infra N.V.,
a sister company of Hedi Trading, has been a
contractor for EBS N.V. for years. According to
Hedi Infra N.V., the high-quality Ensto IMWS
materials are a vital part of the new generation
distribution network.
9
10
Uninsulated Messenger Wire
System (AMKA)
Ensto has developed solutions and integrated product pack-

ages for various Low Voltage ABC (Aerial Bundled Cable) sys-
tems since the early 1960’s. The solutions are designed to
meet the international and local standards and take into ac-
count the special requirements of the urban, rural and forest-
ed areas, density of population, climatic conditions, available
investments etc. The AMKA System is a reliable, safe and easy
way to build a low voltage overhead line system. Because of
the small amount of components and short poles it is easy
to build and preferred by many professionals. AMKA is used
e.g. in Finland, Estonia, Hungary, Russia and Turkey. Ensto of-
fers a complete product package developed especially for the
AMKA System. The products are easy to install and have been
proven to last for decades even in the severe Northern climat-
ic conditions. Ensto solutions for Uninsulated Messenger Wire
System are introduced on pages 21–22.
ABC project in India

In the second half of 2008 Ensto was involved
in building a low tension aerial bundled (LT
AB) line in Gujarat Vihar, Delhi. Ensto offered
their new customers the effective Ensto net-
work building concept, as well as help in the
mechanical and electrical planning. Moreover,
Ensto provided the electricians with an exten-
sive theoretical and practical training package
and also supplied the necessary products for
the project, such as pole fuse switch discon-
nectors, insulation piercing connectors, ten-
sion and suspension clamps and underground
cable joints & terminations.
11
12
Ensto SLIW 50 - a new
generation of connectors
Ensto offers a revolutionary family of connectors. The SLIW 50

connector family exemplifies our role as a global leader in in-
sulation piercing connector technology. The connectors are a
result of close cooperation with our clients. Moreover, when
developing the connectors, a special attention was given to su-
perb usability, easy installation and good materials.
As a whole, the connectors represent the new Ensto design
which combines modern appearance with high quality.
Connectors
Ensto connectors have been used around the
world since the mid 1960´s.
Our connectors are designed to resist corro-
sion and bimetallic electrochemical reactions
and to endure varying mechanical tensions
and other forces detrimental to the connec-
tion. Our portfolio includes:
• Weather- and waterproof insulation
piercing connectors
• Parallel groove connectors for both Al/Al
and Al/Cu conductors
• Insulating covers for the connectors
• Busbar connectors, cable lugs, cable joints
Technical information about Ensto Connec-

tors can be found on pages 22-30.
13
Copper Bars
Copper bars are used together with busbar connectors to connect Cu- or Al- conductors to high-
or low-voltage transformer bushings. It is important to brush and grease the Al-connection. Flat
copper bars are tin-plated to reduce corrosion between aluminium and copper. The copper bars
and connectors are delivered separately. Read more about Copper Bars on page 31.
Bird Protectors
Environmental aspects are increasingly important when building an electricity network today.
Ensto is working together with electricity utilities and environmental experts to find ways to pro-
tect wildlife from electricity distribution network. Read more about Bird protectors on page 31.
Cable Lugs, Earthing Connectors and Earthing Bars

The cable lugs are used for terminating conductors of 1 kV cables. Because of the shear head bolt
construction, no crimping tools are needed. The lugs are water tight and suitable for solid and
stranded, sector shaped and circular conductors. Earthing connectors are used for the connec-
tion of earthings in pole transformer stations. The earthing conductors can be connected to the
bar by using KG connectors. Read more on pages 32-33.
Pole Fuse Switch Disconnectors

Pole fuse switch disconnectors are used for protecting low-voltage networks. They combine the
functions of a fuse, a switch and a disconnector. Pole fuse switches are easy to use as they can
be operated from the ground by using a rod. They are also reliable and work for decades even in
the most severe conditions. Their reliability and safety has been proved in numerous tests in ac-
cordance with IEC and national standards. We manufacture 160 A and 400 A pole fuse switches.
Read more about Pole Fuse Switch Disconnectors on pages 34-37.
Lamp Post Fixtures

Lamp post fixtures are used for connecting and branching aluminium and copper cables in lamp
posts and cable cabinets. The fixtures are insulated. Read more about Lamp post fixtures on
pages 38-40.
14
Fixing Materials for Pole and Wall Mount
AB cables have usually a single layer of insulation only. They are not intended to be installed
directly to the supporting surface. The wall mount fittings and the distance clips make it pos-
sible to install cables on various surfaces horizontally and vertically. Read more on pages 40-42.
Suspension Hooks
AB cables are suspended on wooden, concrete or steel poles and walls. Every support requires
its own tensioning device. The Ensto hook program has a solution for all needs and tensions
required. The installation is easy and quick and no special tools are needed. Read more about
Suspension Hooks on pages 42-44.
Stay Wire Accessories and Pole Base Reinforcers

Ensto offers supporting stay wire sets, pole base reinforcers, and pole hats. We have a variety
of standardized sets available, which makes the material handling easy and speeds up the line
erection process. Ensto’s pole base reinforcers increase the life time of the poles. Read more on
pages 45-46.
Tools
Ensto’s tool selection includes products that are especially designed to fit the needs of network
installers. Together with our customers we have developed many tools to facilitate the installa-
tion work. When installers use tools that fit and are designed for their work, a reliable installation
can be made safely. Furthermore, a well-made installation has great impact on the service life
and reliability of the network. Read more about Tools on pages 46-49.
15
Product information
Ensto Products for Four Core System
Tension Clamps
Tension clamp SO243
The SO243 is a tension clamp for four core service connections - made from weather durable and mechani-
cally reliable polymeric plastic. The light weight design of SO243 provides extremely easy and quick an-
choring of LV overhead cables - either to poles or walls by means of standard hooks. No tools are required
during the installation.
TYPE EAN CONDUCTOR SIZE CABLE DIA. mm TIGHTENING SMFL kN WEIGHT PACK./
mm² TORQUE Nm (kg) pcs
SO243 6418677437977 2-4 x (6-25) 5.3-9.1 2.0 0.07 50
Tension clamps SO157.1 and SO158.1

SO157.1 is used for the anchoring of a two core overhead cable to poles or walls by means of standard
hooks. SO158.1 is used for the tensioning of a four core overhead cable to poles or walls by means of stan-
dard hooks.
2x16mm² 3.4 kN/
SO157.1 6418677414558 2x(16-35) 7.0-10.2 22 2x25mm² 6 kN / 0.080 50
2x35mm² 7.2 kN
4x16mm² 5.5 kN /
SO158.1 6418677411618 4x(16-35) 7.0-10.2 22 4x25mm² 8.75 kN / 0.085 50
4x35mm² 11.2 kN
Tension clamps SO80 and SO80.225

SO80 is used for the anchoring of a four core and SO80.225 of a 2-core overhead cable to poles or walls by
means of standard hooks. The clamps are equipped with a spring to make the installation easier.
2x16mm² 3.4 kN /
4x16mm² 6.8 kN /
SO80 6418677405037 4x(16-25) 7.0-9.0 25 0.23 50
2x25mm² 5.4 kN /
4x25mm² 8.75 kN
2x16mm² 3.4 kN /
SO80.225 6418677405044 2X(16-25) 7.0-9.0 25 0.20 50
2x25mm² 5.4 kN
2x16mm² 3.4 kN /
4x16mm² 6.8 kN /
SO80S 6438100304546 4X(16-25) 7.0-9.0 25 0.23 50
2x25mm² 5.4 kN /
4x25mm² 8.75 kN
Tension clamp SO234S

For the termination of four core overhead cables. The tension clamp is equipped with shearhead nuts.
4x50mm² 27kN /
4x70mm² 37 kN /
SO234S 6418677442339 4x(50-120) 10.8-16.7 44 1.3 10
4x95mm² 37 kN /
4x120mm² 37 kN

Tension clamp for the termination of 4 core overhead cables. The tension clamp is equipped with shear-
head nuts.
4x25mm² 13 kN /
SO274S 6418677446696 4x(25-50) 7.0 –10.2 44 4x35mm² 17.8 kN / 1.0 10
4x50mm² 25 kN
16
Tension clamp for the termination of 4 core overhead cables. The tension clamp is equipped with shear
head nuts.
4x50 mm² (25.0 kN),
SO275S 6418677446719 4 x (50-70) 11.6-13.2 44 1.22 10
4x70 mm² (36.0 kN)
Tension clamp SO118.425S 203

For the termination of four core LV AB cable with a hook fixing. Clamp is equiped with shear-head nuts. The
clamps have strong springs which keep the clamp in an open position during the installation of conductors.
22
The clamping action functions through wedges. The body is made of weather resistant aluminium alloy and
38
the plastic parts of special fibreglass reinforced plastic.
6
95
4x25mm² 14.5 kN /
SO118.425S 6418677442261 4x(25-35) 8.4-9.2 44 0.465 25
4x35mm² 20 kN
Tension clamps SO118.1201S

For the termination of 4-core LV AB cable with hook fixing. The clamps have strong springs which keep the
clamp in an open position during the installation of conductors. The clamping action functions through
wedges. The body is made of weather resistant aluminium alloy and the plastic parts of special fibreglass
reinforced plastic.
4x50 mm² - 23kN /
4x70 mm² - 33kN /
SO118.1201S 6418677442247 4x(50-120) 10.8-16.7 44 1.20 10
4x95 mm² - 35kN /
4x120 mm² - 35kN
Tension clamp SO118.1202S

For the termination of 4-core LV AB cable with hook or universal fixing. The clamps have strong springs
which keep the clamp in an open position during the installation of conductors. The clamping action func-
tions through wedges. The body is made of weather resistant aluminium alloy and the plastic parts of special
fibreglass reinforced plastic.
4x50 mm² 27 kN
SO118.1202S 6418677442254 4x50-120 10.8-16.7 44 / 4x95-120 mm² 1.38 10
35 kN
Suspension Clamps
Suspension clamp SO99

Used for the installation and suspension of cables from poles in straight lines and at angles of up to 90° with
4x25 mm² and 4x50 mm² cables or up to 60° with 4x95 mm² cables. The body is made of hot-dip galvanized
steel, and there is a stainless steel reinforced ring in the hook attachment. The integral rollers are made of
weather resistant plastic. At angles exceeding 30°, the use of an additional roller set ST26.99 is recommen-
ded to use with the clamp.
SO99 6418677405181 4 x (25-95) 18-39 12 18 0.825 10
17
Extension roller ST26.99
This additional roller set fits easily onto the SO99 clamp. It is used when angles exceed 30 degrees.
TYPE EAN WEIGHT (kg) PACK./pcs
ST26.99 6418677405501 2.3 10

For the installation and suspension of four core ABC cables from poles with standard hook attachment.
For straight lines and, depending on cross-section, angels up to 15/30 degrees. Structure itself provides
installation without tools. Clamp including composite parts is protected form wearing in hook attachment
point.
SO270 6418677441875 2x(25-35), 4x(16-120) 12-42 5 7 0.150 25
Suspension clamps SO130 and SO130.02

SO130 is used for the installation and suspension of LV ABC cables to poles with standard hook attachment.
For straight lines and angles up to 30° 4x(25-120 mm²) and 60° 4x(25-50). Thanks to the integrated construc-
tion, no extra parts are needed for the installation. The body is made of corrosion proof aluminium and the
inserts of weather resistant plastic. SO130.02 is equipped with a wing nut.
SO130 6418677404306 2-4x(25-50) ≤ 60º / 12-28 ≤ 60º / 12-42 10 18 0.294 25
2-4x(25-120) ≤ 30º ≤ 30º
SO130.02 6418677419201 2-4x(25-50) ≤ 60º / 12-28 ≤ 60º / 12-42 10 18 0.31 25
2-4x(25-120) ≤ 30º ≤ 30º
Suspension clamps SO136 and SO136.02

For the installation and suspension of four core LV ABC cables to poles with standard hook attachment. For
straight lines and angles up to 90º. No extra parts are needed for the installation. SO136.02 is equipped
with a wing nut.
SO136 6418677404368 2-4x(25-120) ≤ 90º 12-42 10 40 0.730 10
SO136.02 6418677419225 2-4x(25-120) ≤ 90º 12-42 10 40 0.745 10
18
Ensto Products for Insulated Messenger Wire System
Suspension Clamps
For suspensioning of LV ABC cables in an insulated messenger wire system (IMWS). Suitable for every clima-
tic conditions. Bracket is pre installed.
TYPE EAN BRACKET MESSENGER MESSENGER SMFL kN WEIGHT (kg) PACK./pcs
mm² DIA. mm
SO260 6418677418914 with bracket 25-95 8.5-15.5 12 0.37 20
SO260.1 6418677419058 without bracket 25-95 8.5-15.5 12 0.16 50
SO260.2 6418677419065 only bracket 15.5 0.21 50
Suspension clamp SO265.1

For suspensioning of LV ABC cables in an insulated messenger wire system (IMWS) with standard hook
installation. Easy to install without tools. The messenger is placed to the groove and locked with the locking
part. Clamp equipped with wear protection plate.
TYPE EAN MESSENGER mm² MESSENGER DIA. mm SMFL kN WEIGHT (kg) PACK./pcs
SO265.1 6418677419553 16-95 7.5-15.5 12 0.1 20
Suspension clamp SO69.95

The suspension clamp is used for the suspension of the insulated messenger in straight lines and at angles
up to 90°.
SO69.95 6418677414572 16-95 7.0-16.5 22 0.244 50
Tension Clamps
Tension clamps SO250

SO250 series consists of clamps for different messenger cross sections suitable for various climatic condi-
tions. The clamps are easy to install without tools and are available for both bracket and hook installation to
wooden, concrete or steel poles. Clamps are supplied with or without the bracket.
TYPE EAN BRACKET MESSENGER MESSENGER SMFL kN WEIGHT (kg) PACK./pcs
mm² DIA. mm
SO250 6418677418679 with bracket 50-70 11-14 15 0.58 10
SO250.01 6418677418617 without bracket 50-70 11-14 15 0.47 25
SO251 6418677418693 with bracket 95 15-15.5 15 0.58 10
SO251.01 6418677418709 without bracket 95 15-15.5 15 0.47 25
SO252 6418677418716 with bracket 25-35 8.5-11 12 0.58 10
SO252.01 6418677418723 without bracket 25-35 8.5-11 12 0.47 25
SO253 6418677418907 only bracket 22 0.11 25
Tension clamp SO65.1

Used for the termination of insulated messenger wires. Insulation shall be peeled of before installation.
SO65.1 6418677404849 16-70 4.9-9.8 18.6(70mm²) 0.296 50
19
Ensto Products for Insulated Messenger Wire System
Tension clamp SO95
Used for the tensioning of all cables dia. 11-19 mm with round shape. Light weight, no loose parts. The
clamp is easy to install, without cutting the cable. The body is made of weather and UV-radiation resistant
thermoplastic and the bail of hot-dip galvanized steel.
TYPE EAN CABLE DIA. mm SMFL kN WEIGHT (kg) PACK./pcs
SO95 6418677405174 11-19 2.5 (54 mm² ) 0.1 50
Tension clamp SO243

The SO243 is a tension clamp for four core service connections - made from weather durable and mechani-
cally reliable polymeric plastic. The light weight design of SO243 provides extremely easy and quick an-
choring of LV overhead cables - either to poles or walls by means of standard hooks. No tools are required
during the installation.
TYPE EAN CONDUCTOR SIZE mm² CABLE DIA. mm SMFL kN WEIGHT (kg) PACK./pcs
SO243 6418677437977 2-4 x (6-25) 5.3-9.1 2.0 0.07 50
20
Ensto Products for Uninsulated Messenger Wire System (AMKA)
Tension Clamps
Tension clamps SO3 and SO4
Used for tensioning of an uninsulated messenger (AMKA).
TYPE EAN MESSENGER mm² MESSENGER mm SMFL kN COLOUR CODE WEIGHT (kg) PACK./pcs
SO3.16 6418677414541 16 4.8 4 - 0.105 50
SO3.25 6418677404597 25 5.8 6.6 Orange 0.103 50
SO3.35 6418677404603 35 6.8 9.3 Red 0.103 50
SO3.50 6418677404627 50 8.0 13.2 Yellow 0.103 50
SO4.70 6418677404733 70 9.6 18.6 White 0.237 50
SO4.95 6418677404740 95 11.3 18.6 Black 0.237 50
Tension clamp SO28

The messenger is fitted, the clamp opened, directly into the groove without cutting.
6
SMFL various messenger cross-sections:
21
25 mm² - 6.6 kN
180
35 mm² - 9.3 kN
50 mm² - 13.2 kN
70
TYPE EAN MESSENGER MESSENGER SMFL kN TIGHTENING WEIGHT (kg) PACK./pcs
mm² mm TORQUE Nm
SO28 6418677404580 25-50 5.8-8.0 13.2 20 0.247 50 47
d
Tension clamp SO141

For anchoring of LV ABC with uninsulated messenger (AMKA). The messenger is fitted, the clamp opened,
directly into the groove without cutting. Clamp ia equipped with eye for cable hoist. ØD
SMFL for various messenger cross-sections are as follows: 81
- 16 mm² - 4.3 kN 0
- 25 mm² - 6.6 kN Ø2
- 35 mm² - 9.3 kN
71
12
23
- 50 mm² - 13.2 kN 170
- 70 mm² - 18.6 kN
- 95 mm² - 25.1 kN
mm² mm TORQUE Nm
SO141 6418677404405 16-95 4.9-11.3 25.1 44 0.46 25
Terminal clamps SN2.2, SN3.3 and SN3.31

Terminal clamps are used for the termination of aluminium conductors to poles or walls.
46

mm² mm TORQUE Nm d
SN2.2 6418677404009 AAAC 16-50 4.4-8.3 13.2 (50 mm²) 20 0.096 100 40
SN3.3 6418677404016 AAAC 50-70 7.9-10 18.6 (70 mm²) 20 0.18 50
SN3.31 6418677416170 AAAC 50-95 7.9-11.7 25.1 (95 mm²) 26 0.18 50
63
Tension clamp SO65

Used for tensioning of AAAC or uninsulated messenger wires (AMKA).
SMFL for various messenger cross-sections:
16 mm² - 4.3 kN
25 mm² - 6.6 kN
35 mm² - 9.3 kN
50 mm² - 13.2 kN
70 mm² - 18.6 kN
mm² mm TORQUE Nm
SO65 6418677404832 16-70 4.9-9.8 18.6 (70 mm²) 25 0.23 50
21
Ensto Products for Uninsulated Messenger Wire system (AMKA)
Suspension Clamps

Used for the suspension of overhead cables with uninsulated messenger in straight lines and angles up to
90°.
mm² mm TORQUE Nm
SO214 6418677410666 16-95 5.8-13 25 48 0.248 50
d
Ensto Connectors
Insulation Piercing Connectors
Waterproof insulation piercing connector SLIW50

SLIW50 is used with insulated aluminium or copper conductors. Fully insulated bolt provides safe live line
working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage 6
kV/50 Hz/1 min in water. Connector's design enables hot line installation without peeling insulation from
conductor.
TYPE EAN MAIN CONDUCTOR BRANCH CONDUCTOR CONDUCTOR WEIGHT (kg) PACK./pcs
mm² mm² DIAMETER mm
SLIW50 6438100303921 10 - 50 1.5 - 10 6.1-12.5 / 3.0 - 7.0 0.05 120

conductor.
SLIW54 6438100303785 16-120 6-50 7.0-17.6 / 4.0-12.1 0.085 60

conductor. d1
d1
d2
SLIW57 6438100303686 25-150 25-95 8.4-18.5 / 8.4-15.2 0.113 60
Waterproof insulation piercing connector SLIP12.05

The SLIP12.05 is used with all connections of insulated aluminium and copper main and branch conduc-
tors up to 1000VAC. The design enables hot line installation. Equipped with shear head screw.
TYPE EAN MAIN CONDUCTOR BRANCH CONDUCTOR CONDUCTOR WEIGHT PACK./pcs
mm² mm² DIAMETER mm (kg)
SLIP12.05 6418677441783 1.5-50 1.5-50 3-12.1 0.1 50
22
Ensto Connectors
Insulation piercing connector SLIP12.1
The SLIP12.1 is used with all connections of insulated aluminium and copper main and branch conductors
up to 1000VAC. The design enables hot line installation. Equipped with shear head screw.
SLIP12.1 6418677429033 10-95 1.5-50 3-16 0.1082 50

SLIP22.127 is for all connections of uninsulated aluminium or copper main and insulated branch conduc-
tors up to 1000VAC. Equipped with shear head screw.
SLIP12.127 6418677446023 10-70 1.5-50 3.0-12.1 0.108 50

The SLIP22.1 is for all connections of insulated aluminium and copper main and branch conductors up to
1000VAC. The design enables hot line installation. The shear head is insulated from the bolt and the con-
nector body. Equipped with shear head screw.
SLIP22.1 6418677403842 Al 10-95 / Cu 1.5-70 Al 10-95 / Cu 1.5-70 3.0-16.0 0.124 50

SLIP22.127 is for all connections of uninsulated aluminium and copper main and insulated branch conduc-
tors up to 1000VAC. Equipped with shear head screw.
6.5-16.0 / 3.0-
SLIP22.127 6418677416194 Al 25-95 / Cu 25-70 Al 2.5-95 / Cu 1.5-70 0.120 50
16.0
Insulation piercing connectors SLIP32.2 and SLIP32.21

The SLIP32.2 is for all connections of insulated aluminium and copper main and branch conductors up
to 1000 VAC. The design enables hot line installation. The shear head is insulated from the bolt and the
connector body. SLIP32.21 is for all connections of uninsulated aluminium and copper main and insulated
branch conductors up to 1000 VAC. Equipped with shear head screw.
SLIP32.2 6418677442001 Al 16-150 / Cu Al 16-120 / Cu 16-95 7.0-19.0 0.150 50
16-150
SLIP32.21 6418677442018 Al/Cu 16-150 Al 16-120 / Cu 16-95 7-19 0.15 50
Insulation piercing connector SL11.118

Universal connector for all combinations of aluminium and copper main and branch connectors. SL11.118
is for PEX insulated conductor.
TYPE EAN MAIN CONDUCTOR BRANCH CONDUCTOR CONDUCTOR TIGHTENING WEIGHT PACK./
mm² mm² DIAMETER mm TORQUE Nm (kg) pcs
SL11.118 6418677403538 Al 10-95 / Cu 1.5-70 Al 10-95 / Cu 1.5-70 3.0-16.0 26 0.121 50
23
Ensto Connectors
Multitap Insulation piercing connectors SL29.4 and SL29.8
Multitap connector is especially designed to be used with universal piercing connectors e.g. SL11.118
and SLIP22.1 up to 1000 V a.c. to facilitate several out-going conductors. Each branch conductor can be
connected with a separate screw.
TYPE EAN FOR CONDUCTOR mm² CONDUCTOR TIGHTENING WEIGHT (kg) PACK./pcs
DIAMETER mm TORQUE Nm
SL29.4 6418677403682 Cu 2x(1.5-25) and/or Al 2x(10-35) 3-10.9 15 0.150 50
SL29.8 6418677403699 Cu 4x(1.5-25) and/or Al 4x(10-35) 3-10.9 15 0.270 25
Insulation piercing connectors SL9.11 and SL9.2

SL9.11 is equipped with springs made of stainless steel to make the installation easier. SL9.11 is with one
bolt. SL9.22 is equipped with a threaded hole for a surge arrester. The design enables hot line installation
without peeling the insulation of the conductor.
TYPE EAN MAIN BRANCH d1 mm d2 mm TIGHTENING WEIGHT (kg) PACK./pcs
CONDUCTOR CONDUCTOR TORQUE Nm
mm² mm²
SL9.11 6418677403804 Al 16-120 Al 16-35 7-18 4.6-7.5 20 0.1 50
SL9.21 6418677403828 Al 16-120 Al 16-95 7-18 4.6-12 20 0.163 50
SL9.22 6418677403835 Al 16-120 Al 16-95 7-18 4.6-12 20 0.15 50
Insulation piercing connector SM6.21

Used for aluminium to copper connections. SM6.21 is equipped with springs made of stainless steel to
make the installation easier. SM6.21 has teeth in the main side only.
TYPE EAN MAIN BRANCH d1 mm d2 mm TIGHTENING WEIGHT (kg) PACK./pcs
CONDUCTOR CONDUCTOR TORQUE Nm
mm² mm²
SM6.21 6418677403989 Al 16-95 Cu 6-35 7-16 2.8-7.5 20 0.16 50
End caps PK99

Grease filled end caps are used for preventing water entry from the end of the branch cable.
TYPE EAN CONDUCTOR SIZE mm² CONDUCTOR DIAMETER mm WEIGHT (kg) PACK./pcs
PK99.025 6418677400995 10-25 7.0-9.4 0.003 1000
PK99.050 6418677401008 35-50 9.8-12.0 0.004 500
PK99.095 6418677401015 70-95 12.9-16.0 0.007 400
PK99.2595 6418677401039 25-95 (120) 8.4-18.0 0.006 300
End caps PK553 and PK555

End caps are used for preventing water entry into the end of the branch cable.
TYPE EAN CONDUCTOR SIZE mm² CONDUCTOR DIAMETER mm WEIGHT (kg) PACK./pcs
PK553 6438100306892 4-50 4.0-13.0 0.0042 120
PK555 6438100306908 25-150 8.0-19.0 0.0072 120
PK555
24
Ensto Connectors
Waterproof insulation piercing connector SLIW11.1
SLIW11.1 is used with insulated aluminium or copper conductors. Fully insulated bolt provides safe live
line working. Both main and branch conductor insulations are pierced by single bolt action. Test voltage
6 kV/50 Hz/1 min in water. Connector's design enables hot line installation without peeling insulation
from conductor.
69
d1
d2
SLIW11.1 6418677403866 Al/Cu 16-95 Al/Cu 1.5-10 7.0-16.1 / 2.2-7.0 0.054 60
40 42
Waterproof insulation piercing connector SLIW15.1

SLIW15.1 is used with insulated Al or Cu conductors. Fully insulated bolt provides safe live line working.
Both main and branch conductor insulations are pierced by single bolt action. Shear head bolt and end
cap are insulated. Test voltage 6 kV/50 Hz/1 min in water.
76
d2
TYPE EAN MAIN CONDUCTOR BRANCH CONDUCTOR CONDUCTOR WEIGHT (kg) PACK./pcs d1
SLIW15.1 6418677410734 Al/Cu 16-95 Al/Cu 6-50 6.9-16.1 / 5.9-12.1 0.0816 50
54 66
Waterproof insulation piercing connectors SLIW17.1 and SLIW17.2

The connector is used in all connections with insulated aluminium or copper conductors. The design
enables live line installation without peeling the insulation of the conductors. Test voltage 6 kV/50 Hz/1
min in water. 94
SLIW17.1 6418677414398 Al/Cu 25-150 Al 25-95 / Cu 25-70 7.0-18.0 0.126 50
SLIW17.2 6418677414688 Al/Cu 25-150 Al 25-150 / Cu 25-120 7.0-18.0 0.260 50 61
46.5
SLIW17.1
Aluminium to Aluminium Parallel Groove Connectors
Aluminium to aluminium connectors SL37.1 and SL37.2

Non tension aluminium to aluminium connector SL37.1 is equipped with one M8 bolt. Non tension alumi-
nium to aluminium connector SL 37.2 is equipped with two M8 bolts.
TYPE EAN MAIN BRANCH CONDUCTOR TIGHTENING PLASTIC WEIGHT PACK./ d1 d2
CONDUCTOR CONDUCTOR DIAMETER TORQUE Nm COVER (kg) pcs
39
mm² mm² mm
3.0-13.0 /
SL37.1 6418677414404 Al 6-95 Al 6-95 22 SP15 0.055 200
3.0-13.0
26
3.0-13.0 /
SL37.2 6418677414411 Al 6-95 Al 6-95 22 SP15 0.1 50
3.5-13.0
SL37.1
Aluminium to aluminium connectors SL37.201

Non tension aluminium to aluminium connector SL37.201 is equipped with two M8 shear head bolts.
39 42
TYPE EAN MAIN BRANCH CONDUCTOR TIGHTENING PLASTIC WEIGHT PACK./
mm² mm² mm
3.0-13.0 / d
SL37.201 6418677414602 Al 6-95 Al 6-95 22 SP15 0.1 50
3.5-13.0
25
Ensto Connectors
Aluminium to aluminium connectors SL39.2
Non tension aluminium to aluminium LV and MV connections. The SL39.2 connector is suitable for AAC,
AAAC and ACSR conductors. Equipped with two M8 bolts.
mm² mm² mm
SL39.2 6418677419607 Al 16-150 Al 16-150 4.5-17.5 22 SP15 0.12 50
Aluminium to aluminium connector SL2.11

SL2.11 is brushed and prepared with a joint compound and thus, only the conductors need brushing and
41
greasing. The connector is packed in individual plastic bags. Non tension aluminium to aluminium connec-
tions.
mm² mm² mm
6418677403606 SP14
26
SL2.11 Al 16-50 Al 16-50 4.6-8.6 20 0.052 200
32
Aluminium to aluminium connectors SL4.21, SL4.25 and SL8.21

SL4.21 and SL8.21 are brushed and prepared with joint compound and thus, only the conductors need
brushing and greasing. SL4.25 is equipped with springs to make installation easier.
mm² mm² mm
SL4.21 6418677403736 Al 16-120 Al 16-120 4.21-13.2 20 SP15 0.13 50
SL4.25 6418677403750 Al 16-120 Al 16-120 4.6-13.5 20 SP15 0.128 50
SL8.21 6418677403781 Al 50-240 Al 50-240 7.7-20.0 44 SP16 0.29 25
Multi-connector SL19.4
Branching of 1-3 out-going cables, max. Al 120 mm².
max.45
CONDUCTOR CONDUCTOR DIAMETER TORQUE Nm COVER (kg) pcs d
mm² mm² mm
SP24,
SL19.4 6418677403583 Al 16-120 Al 16-120 4.6-13.5 20 0.25 25
SP25
42
88
Insulation covers SP24 and SP25 100

SP24 is used for the branching of 1-3 out-going cables, max. 120 mm² Al. The insulation cover is made
of weather and UV-radiation resistant thermoplastic. SP24 has cable outlets only in one end. Suitable for
69,5
SL19.4. SP25 is used for the branching of 1-3 out-going cables, max. 120 mm² Al. The insulation cover is
made of weather and UV-radiation resistant thermoplastic. SP 25 has cable outlets in both ends.
TYPE EAN FOR CONNECTORS WEIGHT (kg) PACK./pcs
SP24 6418677405259
80,5
SL19.4 0.04 25
SP25 6418677408175 SL19.4 0.040 25
SP24
26
Ensto Connectors
Surge Arresters
Surge arresters with insulation piercing connectors SE45

SE45 serie includes a piercing connector specially designed for surge arrester. This connector is used when
installing the surge arrester on insulated LV overhead lines. It can be installed on insulated Al/Cu conduc-
tors with cross section range 10-150 mm².
TYPE EAN SURGE CONTINUOUS RATED DISCHARGE DISCONNECTOR WEIGHT (kg) PACK./pcs
ARRESTER OPERATING CURRENT kA
VOLTAGE V 1
SE45.128-10 6418677428937 SGA128-10 280 10 - 0.22 20

SE45.144-10 6418677428944 SGA144-10 440 10 - 0.22 20
SE45.166-10 6418677428951 SGA166-10 660 10 - 0.22 20
SE45.328-10 6418677432767 SGA328-10 280 10 + 0.22 20
SE45.344-10 6418677433382 SGA344-10 440 10 + 0.22 20
SE45.366-10 6418677433399 SGA366-10 660 10 + 0.22 20
Surge arresters with insulation piercing connectors SE46

The design of SE46 serie enables installation on insulated conductor and branch connection, the same
connector is used for both. Connector can be installed on insulated Al conductors with cross section range
10 - 95 mm² and Cu conductors with cross section range 1.5 - 70 mm² and branch connection with the same
range of conductors.
TYPE EAN SURGE CONTINUOUS RATED DISCHARGE DISCONNECTOR WEIGHT (kg) PACK./pcs
ARRESTER OPERATING CURRENT kA
VOLTAGE V
SE46.128-10 6418677429002 SGA128-10 280 10 - 0.25 20
SE46.144-10 6418677429019 SGA144-10 440 10 - 0.25 20
SE46.166-10 6418677429026 SGA166-10 660 10 - 0.25 20
SE46.328-10 6418677432774 SGA328-10 280 10 + 0.25 20
SE46.344-10 6418677433405 SGA344-10 440 10 + 0.25 20
SE46.366-10 6418677433412 SGA366-10 660 10 + 0.25 20
Aluminium to Copper Parallel Groove Connectors
Aluminium to copper connectors SM1.11, SM2.11, SM2.21, SM2.25 and

SM4.21
The connectors are brushed and prepared with joint compound; thus only the conductors need brushing
and greasing. SM2.25 ia equipped with springs to make the installation easier.
mm² mm² mm
3.5-8.6 /
SM1.11 6418677403880 Al 10-50 Cu 1.5-10 20 SP14 0.054 200
1.35-3.6
4.6-10.0 /
SM2.11 6418677403903 Al 16-95 Cu 2.5-25 20 SP15 0.084 100
2.3-6.5
4.6-13.2 /
SM2.21 6418677403927 Al 16-120 Cu 6-35 20 SP15 0.14 50
2.8-7.5
4.6-13.2 /
SM2.25 6418677403941 Al 16-120 Cu 6-35 20 SP15 0.137 50
2.8-7.5
8.6-20.0 /
SM4.21 6418677403965 Al 50-240 Cu 10-95 44 SP16 0.326 25
3.5-12.5
Aluminium / copper to aluminium / copper connectors SL4.26, SL14.2

and SL37.27
For Al or Cu to Al or Cu connections where no mechanical tension is involved. The body is made from tin
plated aluminium alloy, and the bolts are hot-dip galvanized steel.
mm² mm² mm
SL4.26 6418677403767 Al/Cu 16-120 Al 16-120 / Cu 16-95 4.6-14 20 SP15 0.125 50
Al 50-185 / Cu
SL14.2 6418677403552 Al/Cu 50-240 7.7-20 44 SP16 0.28 25
50-150
SL37.17 6418677436116 Al/Cu 6-95 Al 6-95 / Cu 6-70 3-13 22 SP15 0.055
SL37.27 6418677416118 Al/Cu 6-95 Al/Cu 6-95 3-13 22 SP15 0.1 50
Al 16-150 / Cu
SL39.27 6418677438905 Al/Cu 16-150 4.5-17.5 22 SP15 0.120 50
10-120
27
Ensto Connectors
Aluminium / copper to aluminium / copper connectors SL37.271
Non tension aluminium/copper to aluminium/copper connections. SL37.271 is for Al or Cu connections
where no mechanical tension is involved. The body is made of tin plated aluminium alloy, and the bolts are
shear head bolts which are hot-dip galvanized steel. d

mm² mm² mm
SL37.271 6418677450273 Al/Cu 6-95 Al 6-95 / Cu 6-70 3.0-13.0 22 SP15 0.11 50 39.0 42.0
SL37.271
Aluminium / copper to aluminium / copper connectors SL39.271

Non tension aluminium to aluminium LV and MV connections. The SL39.271 connector is suitable for AAC,
AAAC and ACSR conductors. Equipped with two M8 shear head bolts.
66,5
TYPE EAN MAIN BRANCH CONDUCTOR TIGHTENING PLASTIC WEIGHT PACK./ d
mm² mm² mm
SL39.271 6418677450280 Al/Cu 16-150 Al 16-150, Cu 10-120 4.5-17.5 22 SP15 0.13 50
47,2 42,0
Copper to copper crimp connector SE36 8,7

SE36 is for copper to copper connections where also mechanical tension can be involved. The massive C-
formed connector secures continuous electrical contact and low resistance.
11.9
TYPE EAN CONDUCTOR SIZE CONDUCTOR DIAMETER TIGHTENING WEIGHT (kg) PACK./pcs
mm² mm TORQUE Nm
SE36 6418677402043 Cu 10-25 - 0.019 100
19
20.6
SE36
Copper to copper connector SE12.1

The SE12.1 is for copper to copper connections where no mechanical tension is involved or for the connec-
tion of an earthing conductor. The connector is made of copper and the bolt is stainless steel.
SE12.1 6418677401831 Cu 16-70 Cu 10-50 4.5-10.7 20 0.116 100
36
24
Copper to copper connector SE12.101

16,5
The SE12.101 is for copper to copper connections where no mechanical tension is involved or for the
51,5
connection of an earthing conductor. The connector is made of copper and the bolt is stainless steel with
shear head nut.
SE12.101 6418677450136 Cu 16-70 Cu 10-50 4.5-10.7 20 0.121 100 36
24
28
Ensto Connectors
Covers
Insulating cover SP14
SP14 is used as a connector cover. The cover has to be installed so that the drain hole for ambient water
is downwards. The cover is made of UV-radiation and weather resistant thermoplastic. Suitable for SM1.1, 45 60
SM1.11, SL2.11.
SP14 6418677405204 SM1.1; SM1.11; SL2.1; SL2.11 0.014 100 56

is downwards. The cover is made of UV-radiation and weather resistant thermoplastic. Suitable for SM2.1,
SM2.11, SM2.2, SM2.21, SM2.25, SL4.2, SL4.21, SL4.25, SL4.26, SL37.1, SL37.2, SL39.2
SP15 6418677405211 SM2.xx; SL3.xx; SL4.xx; SL37.xx, SL39.xx 0.031 100

is downwards. The cover is made of UV-radiation and weather resistant thermoplastic. Suitable for SM4.2,
SM4.21, SL8.2, SL8.21, SL14.2, SL25.2, series SEW20, SEW21.
SP16 6418677410208 SM4.xx; SL8.xx; SL14.2; SL25.2; SEW20.xx; SEW21.xx 0.037 50
Automatic tension joints

Automatic tension joints and joint kits
The automatic joint is reliable and quick to make. No tools are needed for the installation and the with the
colour code, you can find the correct size easily. The wedges ensure a safe joint.
TYPE EAN FOR CONDUCTOR CONDUCTOR COLOUR CODE WEIGHT PACK./
mm² DIAMETER mm (kg) pcs
CIL63 6418677414220 35 - 50 5.81-8.64 orange / red 0.155 25
CIL64 6418677414237 70 - 95 9.27-12.06 yellow / grey 0.278 25
CIL65 6418677414244 120 - 150 12.75-14.86 pink / black 0.478 25
CIL71 6418677417726 - 14.73-18.40 green / brown 0.840 10
CIL72 6418677418440 - 18.8-21.7 blue / green 1.08 10
Joint kits
CIL66 6418677414251 insulated messenger 5.81-8.6 orange/red 0.26 1
35 - 50
CIL67 6418677414268 insulated messenger 9.27-12.06 yellow/black 0.47 1
70-95
CIL68 6418677414275 insulated messenger 12.75-14.86 pink/black 0.79 1
120-150
Busbar Connectors
Busbar Connector KG71
The KG71 is used for connecting insulated Al- and Cu-conductors without stripping to aluminium busbars
in distribution boards, disconnectors, medium and low voltage transformer bushings. Max thickness of the
bar 7.5 mm.
66
TYPE EAN CONDUCTOR SIZE CONDUCTOR TIGHTENING MAX THICKNESS BOLTS WEIGHT PACK./
mm² DIAMETER mm TORQUE Nm OF THE BAR mm (kg) pcs
Al 16-120 / Cu
KG71 6418677400322 6-18 20 7.5 2 x M8 0.205 50
10-95 42
50
29
Ensto Connectors
Busbar connectors KG6.1, KG41 and KG16
For connecting Al-conductors to aluminium busbars or tin plated copper busbars in distribution boards,
disconnectors, medium and low voltage transformer bushings.
KG6.1 6418677400308 Al 16-70 4.6-10.2 20 10 2 x M8 0.12 50
KG41 6418677400230 Al 2x (16-120) 4.6-14 20 7.5 2 x M8 1.6 50
KG16 6418677400131 Al 16-120 4.6-14 40 10 2 x M10 0.258 25
Busbar Connector KG43

The KG43 connector is used for connecting Al-conductors to aluminium busbars or tin plated copper bus-
bars in distribution boards, disconnectors, medium and low voltage transformer bushings. Max thickness
of the bar 10 mm.
KG43 6418677400254 Al 50-240 7.7-20 40 10 2 x (M10x75) 0.329 25
45
60
KG43
Busbar connectors KG26 and KG26.4

The KG26 and KG26.4 connectors are used for connecting Al-conductors to aluminium busbars or tin pla-
max.40 max.80
ted copper busbars in distribution boards, disconnectors, medium and low voltage transformer bushings.
KG26 6418677400209 Al 120-300 14-22.5 70 15 2 x M12 0.745 10
KG26.4 6418677400216 4 x Al 70-120 9.3-14 70 15 2 x M12 0.805 10
65
70
KG26
Busbar connector KG44

max.45
The KG 44 connector is used for connecting Al/Cu-conductors to aluminium busbars or tin plated copper
busbars in distribution boards, disconnectors, medium and low voltage transformer bushings. Max thick-
ness of the bar 7.5 mm.
max.21
Al 4.4-12.8 / Cu
42.0
KG44 6418677400261 Al 16-120 / Cu 6-35 20 7.5 2 x M8 0.173 50

2.8-7.5
39.5
Busbar connector KG20

max.30 max.25
For connecting Cu-conductors to copper busbars in distribution boards, disconnectors, medium and low
voltage transformer bushings. d
mm² DIAMETER mm TORQUE Nm OF THE BAR mm (kg) pcs 32
KG20 6418677400186 Cu 16-185 4.5-17.5 22 7.5 2 x M8 0.153 50

40
48
30
Copper Bars & Bird Protectors
Copper Bars
Copper bars
Copper bars are used together with busbar connectors to connect Cu- or Al- conductors to high- or low
voltage transformer bushings. It is important to brush and grease the Al-connections. Flat copper bars
are tin-plated to reduce corrosion between aluminium and copper. The copper bars and connectors are
delivered separately.
TYPE EAN BUSBAR CROSS MAX HOLE WEIGHT PACK./
FOR CONNECTORS
SECTION mm² CURRENT A DIAMETER mm (kg) pcs
PSS10 6418677401138 150 400 14 All except KG26 0.097 100
KG6, KG16, KG41, KG43,
PSS85 6418677401350 250 600 22 0.21 50
KG44, KG20
KG6, KG16, KG41, KG43, KG
PSS85.5 6418677401367 250 600 14/22 0.266 50
44, KG20
PSS310 6418677401220 400 950 22 KG26 0.414 100
PSS127 6418677401183 150 400 14 All except KG26 0.145 50
PSS242 6418677401190 250 600 22 All except KG26 and KG20 0.349 25
PSS309 6418677401213 400 950 22 KG26, KG20 0.62 25
PSS309.5 6418677406560 400 950 14/22 KG26, KG20 0.683 1
PSS242.5 6418677401206 250 600 14/22 All except KG26 0.393 25
PSS310
PSS127
Bird protectors
Flexible bird protector set SP38.3
Flexible cover for low voltage bushings, transformers and motors. Easy tie fixing. Made of weather and UV
resistant rubber. Delivered in complete sets of 3 pcs.
SP38.3 6418677405297 0.4 10
31
Cable Lugs, Cable Joints, Earthing Connectors and Earthing Bars
Cable lugs KG9, KG17 and KG18
Used for connecting Al-conductors to distribution boards, components and flat bars. The connections have 25 42
to be brushed and greased. The aluminium parts of the cable lugs are made of corrosion-resistant alumi-
max.42
nium alloy with a tensile strength of 300 N/mm². The bolts are hot-dip galvanized and of 8.8. The copper
bars are tin-plated.
TYPE EAN CONDUCTOR SIZE CONDUCTOR DIAMETER TIGHTENING WEIGHT (kg) PACK./pcs 8.5
max20
mm² mm TORQUE Nm 20 23
36
KG9 6418677400346 Al 2x(16-70) 4.5-10.2 20 0.19 50
KG17 6418677400155 Al 2 x (35-120) 6.6-14 40 0.36 25 KG9
KG18 6418677400179 Al 2 x (50-240) 7.7-20 40 0.465 20
Cable lug KG50

Used for connecting Al or Cu conductors to Al or Cu bars in distribution boards and components.
48
mm² mm TORQUE Nm
KG50 6418677400278 1x16-95 / 2x16-35 4.5-12.5 10 0.101 100
64
29
20
6.2
19,2
Shear head bolt cable lugs SAL

The cable lugs are used for terminating conductors of 1 kV cables. Because of the shear head bolt construc-
tion no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks
off. The lugs are water tight and they are suitable both for aluminium and copper conductors, solid and
stranded, sector shaped and circular.
TYPE EAN CONDUCTOR SIZE mm² HOLE DIAMETER mm WEIGHT (kg) PACK/ PCS
SAL1.27 6418677401404 Al/Cu 6-50 8.5 0.039 100
SAL1.271 6418677401411 Al/Cu 6-50 10.3 0.038 100
SAL1.272 6418677401428 Al/Cu 6-50 12.5 0.038 100
SAL2.2 6418677401435 Al 50-95 10.5 0.078 100
SAL2.27 6418677401442 Al/Cu 50-95 10.5 0.087 100
SAL2.272 6418677401459 Al/Cu 50-95 12.5 0.079 100
SAL3.2 6418677401466 Al 95-185 12.5 0.14 50
SAL3.27 6418677401473 Al/Cu 95-185 12.5 0.141 50
SAL3.272 6418677401480 Al/Cu 95-185 17 0.135 50
SAL4.2 6418677401497 Al 150-300 12.5 0.312 50
SAL4.27 6418677401503 Al/Cu 150-300 12.5 0.324 50
SAL4.271 6418677416163 Al/Cu 150-300 14 0.33 50
SAL4.272 6418677401510 Al/Cu 150-300 17 0.307 50
Cable connectors with shear head bolts

The connectors are used for jointing conductors of 1 kV cables. Because of the shear head bolt construction
no crimping tools are needed. The required torque is achieved by tightening the bolt until it breaks off.
The connectors are water tight and they are suitable both for aluminium and copper conductors, solid and
stranded, sector shaped and circular. The core insulation may be as well plastic as paper.
C
TYPE EAN CONDUCTOR SIZE mm² WEIGHT (kg) PACK/ PCS A d B

SJ0.47 6418677418464 Al/Cu 6-25 0.015 100
SLJ1.27 6418677458187 Al/Cu 6-50 0.034 100
SLJ1.47 6438100306663 Al/Cu 6-50 0.122 100
SLJ2.27 6418677458194 Al/Cu 35-95 0.067 100
SLJ2.47 6438100306670 Al/Cu 35 - 95 0.239 100
SLJ3.47 6418677459726 Al/Cu 95-240 0.278 50
SLJ4.47 6418677459733 Al/Cu 150-300 0.382 50
Earthing connector set SE15

SE15 consists of earthing connector SM2.24, earthing connector support PSS116, and two fixing bolts for
wooden poles.
4.5-14.0 /
SM2.24 6418677403934 Fe / Al 16-120 Cu 6-35 20 0.18 25
2.8-7.5
PSS116 6418677401176 - - - - 0.153 50
4.5-14.0 /
SE15 6418677401848 Fe/Al 16-120 Cu 6-35 20 0.37 25
2.8-7.5
32
Cable Lugs, Cable Joints, Earthing Connectors and Earthing Bars
Earthing bars PSS396 and PSS396.1
Used for the connection of earthings in pole transformer stations. The earthing conductors can be con-
nected to the bar by using KG connectors as follows: Cu 16-185 mm² : KG20, Al 16-120 mm² : KG16, Al
50-240 mm² : KG43.
TYPE EAN BUSBAR CROSS SECTION mm² CONNECTORS WEIGHT (kg) PACK./pcs
PSS396 6418677401237 50 5 pcs 0.291 50
PSS396.1 6418677401244 50 3 pcs 0.216 50
Earthing bar PSS431

Used for the connection of earthings in pole transformer stations. The busbars and the screws are tin-
plated copper.
17
37
TYPE EAN CONDUCTOR SIZE mm² TIGHTENING TORQUE Nm WEIGHT (kg) PACK./pcs
PSS431 6418677401251 5 x 50 10 0.11 25
16
13
15
85
100
Earthing bar PSS874

The PSS874 is used to connect earthing conductors in transformer stations.
TYPE EAN CONDUCTOR SIZE mm² TIGHTENING TORQUE Nm WEIGHT (kg) PACK./pcs
37
17
PSS874 6418677446085 10 x 50 10 0.2 25
16
13
14,5
159
173
33
500m
500m
4x95 mm2
4x95 mm2
4x95 mm2
4x50 mm2
500 m
300 m
Protection of an outgoing feeder Sectionalising, decreased

in a transformer substation. cross-section Sectionalising, short
circuit protection
Ring main
4x95 mm2 Cu 4x25 mm2

4x25 mm2
4x25 mm2
Protection between bare conductors and

Protection of a consumer feeder Connection of a temporary consumer
insulated overhead cables or underground
cable
Pole fuse switch disconnectors 160 A 415 V

Pole fuse switches SZ151 and SZ152
These pole fuse switches include separate terminal covers for incoming and outgoing conductors, thus
making the installation safer.
TYPE EAN NUMBER OF POLES CONDUCTOR SIZE mm² CONNECTORS WEIGHT (kg) PACK./pcs
105
220
INCLUDED
Al 2x(16-120) / Cu
SZ151 6418677405884 3 6xKG71 4.18 1 240
2x(10-95)
SZ151
SZ152 6418677405891 3 Al 2x(16-120) 6xKG41 4.18 1
SZ152.01 6418677405907 3+PEN connector Al 2x(16-120) 6xKG 41+1xKG 71 4.5 1
SZ152.02 6418677405914 3 Al(16-120) and Cu (6-35) 6xKG44 4.3 1
Pole fuse switches SZ157 and SZ156

These pole fuse switches include separate terminal covers for incoming and outgoing conductors, thus ma-
king installation safer. N-pole is permanently connected.
105
220
INCLUDED
Al 2x(16-120) or Cu
SZ157 6418677405952 3+N 8xKG 71 5.9 1 320 240
2x(10-95)
SZ156 6418677405938 3+N Al 2x(16-120) 8xKG41 4.185 1
SZ156.02 6418677405945 3+N Al (16-120) and Cu (6-35) 8xKG44 4.185 1
34
Pole fuse switch SZ51
The plastic covers separate different phases from each other, thus in-coming and out-going terminals are
under same cover. Connectors included 6 x KG41, poles 3. 255 240
INCLUDED
105
SZ51 6418677406034 3 Al 2x(16-120) 6xKG41 4.185 1
D
Pole fuse switches SZ56 and SZ56.1

The plastic covers separate different phases from each other, thus incoming and outgoing terminals are
under same cover. N-pole is permanently connected. The fourth pole is opened and closed together with
the other phase-poles.
INCLUDED
SZ56 6418677406058 3+N Al 2x(16-120) 8xKG41 5.6 1
SZ56.1 6418677406065 4 Al 2x(16-120) 8xKG41 5.2 1
Pole fuse switch SZ50.1

For protecting overhead cables and underground cables in LV networks. Connectors included 2 x KG41,
poles 1. 126 240
INCLUDED
105
SZ50.1 6418677406027 1 Al 2x(16-120) 2 x KG41 2.3 1
220
D
Connectors for 160 A pole fuse switches: KG41, KG44 and KG71
Pole fuse switches can be supplied with or without connectors:
- KG 41 for Al conductors
- KG 71 insulation piercing connector
- KG 44 for Al/Cu conductors, for both Al and Cu conductors
mm² mm TORQUE Nm
KG41 6418677400230 Al 2x (16-120) 4.6-14 20 1.6 50
KG44 6418677400261 Al 16-120 / Cu 6-35 Al 4.4-12.8 / Cu 2.8-7.5 20 0.173 50
KG71 6418677400322 Al 16-120 / Cu 10-95 6-18 20 0.205 50
Terminal cover sets SP42 for 160 A pole fuse switches

Pole fuse switches SZ151, SZ152, SZ156 and SZ157 include separate terminal covers for in-coming and
out-going conductors, thus making installation safer. The plastic covers of SZ50, SZ51, SZ55 and SZ56 can
100
also be replaced by terminal cover sets SP42. The set consists of 2 pcs PMR1502 (terminal cover) and 3 pcs
PMR1503 (middle cover). 185 90
TYPE EAN WEIGHT (kg) PACK./pcs 51 40
SP42 6418677408199 0.200 10
38.5
47 20
35
Pole fuse switch disconnectors 400 A 500 V
Pole fuse switch SZ41
The rating of the pole fuse switch is AC 22B 400 A 500 V according to IEC 60947-3/EN 60947-3 and the size
of the fuse link is 2. The fuse switch can be supplied with a choice of connectors. Connectors included 6 x 308
KG43, poles 3.
256
390
INCLUDED
D
SZ41 6418677405976 3 Al 2x(50-240) 6 x KG43 10.108 1
455
Pole fuse switches SZ46 and SZ46.1

N-pole is permanently connected. The fourth pole is opened and closed together with the other phase-
poles.
256
INCLUDED
400
SZ46 6418677405990 3+N Al 2x(50-240) 8xKG43 13.4 1
SZ46.1 6418677406010 4 Al 2x(50-240) 8xKG43 13.2 1 D
400
460
Connectors for 400 A pole fuse switches: KG43, KG43.6, KG36 and KG20
Pole fuse switches SZ41, SZ46 and SZ46.1 are equipped with Al-connectors KG43. The connectors can be
replaced with Al/Cu-connectors KG36 or tin-plated Al/Cu-connector KG43.6 or Cu-connectors KG20.
mm² mm TORQUE Nm
KG43 6418677400254 Al 50-240 7.7-20 40 0.329 25
KG43.6 6418677412462 Al/Cu 50-240 7.7-20 44 0.32 25
KG36 6418677400223 Al 50-240 / Cu 10-95 Al 7.7-20 / Cu 3.5-12.5 44 0.34 25
KG20 6418677400186 Cu 16-185 4.5-17.5 22 0.153 50
Marking sets for pole fuse switches

The marking set consists of an aluminium fastening bar PEM216 and plastic number plates PEM242.X. We
have a wide selection of number plates, here are few examples.
TYPE EAN DIMENSIONS mm PLATE NO. WEIGHT (kg) PACK./pcs
PEM216 6418677400421 250 x 30 x 3 - 0.120 50
PEM242.25 6418677411830 145x60x1.5 25 A 0.018 50
PEM242.400 6418677400629 145x60x1.5 400 A 0.018 50
PEM241.1 6418677400445 64.0 x 64.0 x 3.0 1 0.007 100
PEM241.6 6418677400520 64.0 x 64.0 x 3.0 6 0.007 100
Multi-bracket PEK49
Used for the attachment of pole fuse switches to steel, concrete and wooden poles by screw or band fixing.
The bracket is made of hot-dip galvanized steel.
TYPE EAN FOR POLE FUSE SWITCHES WEIGHT (kg) PACK./pcs
PEK49 6418677400414 160 A or 400 A 1.556 1
36
Mounting racks PEK43 and PE43.1
Used for the attachment of several 160 A and 400 A pole fuse switches to the same pole. The mounting
racks are made of hot-dip galvanized steel. 800
60
320
PEK43 6418677400391
256
5x160 A or 2x160 A and 2x400 A 9.005 1
PEK43.1 6418677400407 2x160 A and 2x400 A 7.4
105
Mounting racks PEK41 and PEK42
The mounting rack is made of aluminium and used for the installations of two pole fuse switches on the
same pole. Ø12
245
277
PEK41 6418677400377 2x160 A 0.567 1
PEK42 6418677400384 2x400 A or 1 X 400 A and 1x160 A 0.79 1
30 Ø10 Ø11
508
PEK41
Operating rod ST33

Pole fuse switches can be operated from the ground by using the operating rod ST33.
TYPE EAN LENGTH m WEIGHT (kg) PACK./pcs
ST33 6418677405532 2/1.3 1 1
Voltage indicator ST97

Used for checking the fuses of pole fuse switches, without climbing the pole and opening the fuse switch.
By using operating rod, the antenna of the voltage detector is pushed into the voltage measuring opening
of the fuse switch.
If the fuse holder is live, the small LED is lit. A live conductor can also be detected by touching the insulation
of a phase conductor with the voltage indicator.
TYPE EAN DESCRIPTION WEIGHT (kg) PACK./pcs
ST97 6418677408670 Voltage indicator 0.319 1
ST97.1 6418677408687 Voltage indicator with carrying case 0.4 1
ST97.2 6418677408694 Carrying case for ST 97 0.060 1
ST97.3 6418677408700 Voltage indicator with buzzer 0.342 1
Direction of rotation indicator CT1 for 400 V lines

The direction of rotation of the three-phase system can be determined without peeling the conductor in-
sulation. Safe for direct connections to live lines. Displays a missing phase, suitable for determining phase
difference. Watertight construction. Carrying case included.
CT1 6418677408762 1.318 1
37
Earthing devices ST196.2 and 197.2
Earthing devices are used for temporary earthing of the low-voltage network during installation work by
attaching the earthing device to the pole fuse switch. Suitable for 160 A pole fuse switches. Conductor is
included. Short–circuit current 9 kA/1 s. Comes with an earthing conductor Cu 35 mm² of 3 meter and a
connector.
TYPE EAN FOR POLE FUSE SWITCHES NUMBER OF POLES WEIGHT (kg) PACK./pcs
ST196.2 6418677417436 For SZ51, SZ152 3 2.8 1
ST197.2 6418677432705 For SZ56, SZ56.1, SZ156 4 2.8 1
Lamp Post Fixtures
Branching connector KE10

The connectors can be used for aluminum and copper conductors. Tightening torque is 10 Nm. The con-
nectors are used either inside metal poles or in separate boxes.
TYPE EAN FOR CONDUCTOR CONDUCTOR COLOUR WEIGHT (kg) PACK./pcs
mm² DIAMETER mm
KE10.1 6418677400049 4 x (Al 10-35 / Cu 1.5-25) 1.7-9.0 transparent 0.044 50
KE10.504N 6418677455421 4 x (Al 10-50 / Cu 2.5-35) 2.0-10.2 blue 0.045 50
Cover for KE10.504(N)

PMR2635.4 is a protecting cover for connectors KE10.504 & KE10.504N. It is a quick and easy-to-install
slip-on cover which is especially designed for installations where double insulation is a requirement. It can
34,2
23,2
also be used as protection against water, for instance in places where water condensation is a problem.
Ø14,8
23,2 67,2
TYPE EAN DEPTH mm HEIGHT mm LENGTH mm WEIGHT (kg) PACK./pcs

PMR2635.4 6418677456077 40 51 80 0.022 40
38,2
Branching connector sets SV15, SV15.5 and SV50.11

SV15 includes three, SV15.5 four phase connectors KE10.1, one neutral connector KE10.3 and an 16 mm²
earth wire of 0.35 m with a cable lug. SV50 includes three phase connectors KE10.504, one neutral connec-
tor KE10.506 and a 16 mm² earth wire of 0.35 m with a cable lug. SV50.11 includes also fuse base SVV1.10.
TYPE EAN PARTS WEIGHT (kg) PACK./pcs
SV15 6418677405624 3xKE10.1+ KE10.3 0.270 10
SV15.5 6418677405716 4xKE10.1 + KE10.3 0.304 10
SV50 6418677405808 3xKE10.504 + KE10.506 0.315 10
SV50.11 6418677405815 SV50 + SVV1.10 0.52 10
Fuse bases SVV1.10 and SVV1.06

The fuse base has a transparent cover with openings for making connections. Fuse base according to
standard CEE 16 25A II. Fuse included.
TYPE EAN FUSE MAX A WEIGHT (kg) PACK./pcs
SVV1.10 6418677405839 1x10/25 0.283 10
SVV1.06 6418677405822 1x6/25 0.265 10
38
Lamp Post Fixtures
Circuit breakers SVV3 and SVV3.2
TYPE EAN RATED CURRENT (A) WEIGHT (kg) PACK./pcs

SVV3 6418677405853 10 0.190 10
SVV3.2 6418677405877 2x10 0.3 10
Lamp post fixtures SV15.06, SV15.065, SV15.11 and SV15.115

SV15.06 includes three phase connectors, SV15.065 includes four phase connectors. Additionally both fixtures
include KE10.1, one neutral connector KE10.3, a 16 mm² earth wire of 0.35 m with a cable lug and fuse
base SVV1.06. SV15.11 includes three, SV15.115 four phase connectors. Additionally both include KE10.1,
one neutral connector KE10.3, a 16 mm² earth wire of 0.35 m with a cable lug and fuse base SVV1.10.
TYPE EAN PARTS WEIGHT (kg) PACK./pcs
SV15.06 6418677405631 SV15 + SVV1.06 0.57 10
SV15.065 6418677405648 SV15.5 + SVV1.06 0.611 10
SV15.11 6418677405662 SV15 + SVV1.10 0.56 10
SV15.115 6418677405686 SV15.5 + SVV1.10 0.6 10
SV15.12 6418677405693 SV15 + SVV3 0.484 10
SV15.125 6418677405709 SV15.5 + SVV3 0.6 10
Fuse fixtures including connector, SV29.25 and SV29.63

Used for protection of service cables and street lighting in ABC network. The set includes a connector and
a fuse fixture.
TYPE EAN CONNECTORS INCLUDED FUSE MAX A WEIGHT (kg) PACK./pcs
SV29.2511 6418677432835 SL11.11 25 0.321 10
SV29.6311 6418677432842 SL11.11 63 0.475 10
SV29.2522 6418677432859 SLIP22.1 25 3.69 10
SV29.6322 6418677432866 SLIP22.1 63 0.468 10
Fuse fixtures without connector SV29.25 and SV29.63

Used for protection of service cables and street lighting in ABC network. Can be used together with insula-
tion piercing connectors SL11.11, SLIP22.1 and SLIW11.1. Fuse is not included.
TYPE EAN CONNECTORS INCLUDED FUSE MAX A WEIGHT (kg) PACK./pcs
SV29.25 6418677432873 - 25 0.230 10
SV29.63 6418677432880 - 63 0.384 10
Fuse boxes SK180.25 and SK180.63

The fuse boxes SK180.25 (25 A) and SK180.63 (63 A) are ready-equipped in the factory. The feeder cable is
max. 50 mm² Al/Cu.
TYPE EAN CABLE DIAMETER mm WIDTH mm HEIGHT mm DEPTH mm WEIGHT (kg) PACK./pcs
200
SK180.25 6418677403453 22-32 / 2 x 16-25 300 200 130 2.319 1

SK180.63 6418677403460 22-32 / 2 x 16-25 300 200 130 2.709 1
300
SK180.25
39
Lamp Post Fixtures
Branch boxes SK175 and SK180
The branch boxes SK175 (35 mm²) and SK180 (50 mm²) are equipped with separate connectors. The con-
nectors are tin-plated, so they can be used for both Al and Cu cables. The SK 175 includes four KE10.1 con-
nectors and the SK180 includes four KE10.504 connectors.
120
TYPE EAN CABLE DIAMETER mm WIDTH mm HEIGHT mm DEPTH mm WEIGHT (kg) PACK./pcs
SK175 6418677403439 2 x 16-25 200 120 86 0.682 8
SK180 6418677403446 2 x 22-32 / 16-25 300 200 130 2.04 1
200
SK175
Branch box SK160

Lamp Post Cabinet SK160. Hot galvanized steel cabinet.
TYPE EAN INCLUDING WEIGHT (kg) PACK./pcs
SK160 6418677403378 - 9.5 1
2200
1700
105 100
SK160
Distance clip SO75.100

SO75.100 is used to attach underground cables to wooden, steel or concrete poles.
TYPE EAN CABLE DIA. USED FOR DISTANCE FROM SCREW/NAIL mm WEIGHT PACK./
mm SURFACE mm (kg) pcs
SO75.100 6418677421730 45-100 All surfaces 50 0.105
Wall mounted clamp SO125

Used for the anchoring and suspension of the 2-4-core LV ABC-cables to wooden, stone, brick or concrete
walls in straight lines and angles up to 30°.
TYPE EAN CONDUCTOR DIAMETER mm TIGHTENING TORQUE Nm WEIGHT (kg) PACK./pcs
SO125 6418677404238 Ø12-44 10 0.33 25
Distance nails SO70

Used for the attachment of an overhead cable or a conductor to a pole or a wall. The nails are designed so
that the installed cable does not come into contact with the pole or wall surface. The plastic parts are made 40
of heat and UV-radiation resistant materials and the metal parts are protected against corrosion. Distance
from the surface 40 mm.
TYPE EAN CABLE DIA. USED FOR DISTANCE SCREW/NAIL mm WEIGHT PACK./ Ød
mm FROM SURFACE (kg) pcs
mm
SO70 6418677404863 12-47 wooden surfaces 40 body and band only 0.015 100
SO70.11 6418677404870 12-47 Wooden surfaces 40 5 inch nail/137 mm 0.035 250
SO70.13 6418677404894 12-47 Hard walls 40 6x110 screw, 10x50 plug 0.045 250
SO70.16 6418677414695 12-47 Wooden surfaces 40 6.7x120 screw 0.045 250
SO70.17 6418677404917 12-47 Hard walls 40 6.7x120 screw, 10x50 plug 0.055 250
SO70.19 6418677431272 12-47 Hard walls 40 5.5x125 nail, 10x50 plug 0.050 100
40
Distance nail SO277
SO277 is for the installation on facades all bundles fitted with neutral conductor as specified in standard
NF C 33-040.
SO277 6418677448461 30-48 hard walls 35 5x100 nail, 12x60 plug 0.031 25
Distance nail SO277.1

SO277.1 is for the installation on wooden poles insulated bundles.
SO277.1 6418677448478 14.8-50 wooden surfaces 35 5.1x90 nail 0.030 25
Light Pole Bracket SO279

Used with bands for pole installation and with screws for wall installation.
TYPE EAN SMFL kN WEIGHT (kg) PACK./pcs
SO279 6418677452246 2 0.036 50
Distance nail SO71 and perforated band SO71.1

Used for the attachment of an overhead cable or a conductor to wooden surfaces. SO70 includes one per- 175
forated band SO71.1, but can also be used with two perforated bands. Distance from the surface 90 mm. 90
SO71 6418677404924 12-47 wooden surfaces 90 7 inch / 175 mm 0.051 100
SO71.1 6418677404948 0.010 100 ØD
SO71
Distance nails SO76

Distance nails SO76 are used for attachment of an overhead cable or a conductor to a wooden pole or a
wall. The nails are designed so that the installed cable does not come into contact with the pole or wall
surface. Distance from the surface 60 mm.
SO76 6418677446382 12-47 - 60 Body and band only 0.017 250
SO76.11 6418677446399 12-47 Wooden surfaces 60 5.5x145 nail 0.047 100
SO76.19 6418677446429 12-47 Hard walls 60 5.5x145 nail, 10x50 plug 0.060 100
Multi-cleat SO103
For the attachment of cables or tubes to wooden surfaces or hard walls. Manufactured of weather and
UV-radiation resistant thermoplastic, nails are electrical galvanized.
50
mm SURFACE mm (kg) pcs d
Wooden surfaces,
SO103 6418677404023 16-25 0/5 50x2.5 0.010 500
hard walls
10
42,5
41
Distance clips SO79.1 and SO79.5
Used for the attachment of an overhead cable or a conductor to metal and concrete poles. Distance from
surface 25 mm.
SO79.1 6418677405006 Distance clip With 1000 mm band 0.180 25
SO79.5 6418677405013 Distance clip Without band 0.065 50
Distance nail SO42.1

Used for the attachment of an overhead cable or a conductor to a pole or a wall.
SO42.1 6418677411762 3-13 wooden surfaces 50 6.7x160 0.035 50
Distance clips SO72.1 and SO72.2

Used for the attachment of an underground or a service cable to a wooden or a concrete wall. Ød
90
SO72.1 6418677404979 27-32 Wooden surfaces 8 5x50 0.020 250
SO72.2 6418677404986 27-32 Hard walls 8 5x50 + plug 8x40 0.022 250
20
55
Suspension Hooks
Suspension hooks through the pole SOT15
The suspension hook is used with insulated overhead cables or service cables. The hook is made of hot dip
galvanized steel.
TYPE EAN d L mm B mm A mm K mm TEST LOAD TEST LOAD WEIGHT (kg) PACK./pcs
Fx/kN Fy/kN
SOT15.82 6418677410291 M12 200 120 18 60 4.8 1.5 0.42 25
SOT15.92 6418677410307 M12 240 120 18 60 4.8 1.5 0.46 25
SOT15.8 6418677410314 M16 200 120 18 70 9.6 2.4 0.8 20
SOT15.9 6418677410321 M16 240 120 18 70 9.6 2.4 0.86 20
SOT15.10 6418677410338 M16 320 120 18 70 9.6 2.4 0.99 20

The suspension hook is used with insulated overhead cables or service cables. The hook is of hot dip gal-
vanized steel.
Fx/kN Fy/kN
SOT21.16 6418677407901 M16 200 120 20 80 11.9 2.4 0.78 20
SOT21.116 6418677407895 M16 240 120 20 80 11.9 2.4 0.84 20
SOT21.216 6418677407925 M16 320 120 20 80 11.9 2.4 0.97 20
SOT21 6418677407840 M20 200 120 20 80 14.5 4.6 1.22 20
SOT21.1 6418677410376 M20 240 120 20 80 14.5 4.6 1.32 20
SOT21.2 6418677407918 M20 320 120 20 80 14.5 4.6 1.51 20
SOT21.3 6418677410383 M20 350 120 20 80 14.5 4.6 1.58 20
42
Suspension Hooks
Suspension hooks through the pole SOT21.0
The suspension hook is used with insulated overhead cables or service cables. The hook is of hot dip gal-
vanized steel.
Fx/kN Fy/kN
SOT21.0 6418677407857 M20 200 120 20 80 14.5 4.6 1.22 20
SOT21.01 6418677407864 M20 240 120 20 80 14.5 4.6 1.39 20
SOT21.02 6418677407871 M20 320 120 20 80 14.5 4.6 1.51 20
SOT21.03 6418677407888 M20 350 120 20 80 14.5 4.6 1.58 20

Fx/kN Fy/kN
SOT101.1 6418677410277 M20 250 110 24 70 30.6 6.7 1.7 10
SOT101.2 6418677410284 M20 310 140 24 70 30.6 6.7 1.8 10
Double arming bolts SOT4
TYPE EAN d L mm B mm C mm R mm E mm WEIGHT (kg) PACK./pcs

SOT4.8 6418677410079 M16 240 120 25 100 60 0.5 20
SOT4.9 6418677407994 M16 280 120 25 100 60 0.61 20
SOT4.10 6418677407956 M16 360 120 25 100 60 0.69 20
SOT4.5 6418677407963 M20 240 120 25 100 60 0.6 20
SOT4.6 6418677407970 M20 280 120 25 100 60 0.72 20
SOT4.7 6418677407987 M20 360 120 25 100 60 0.87 20
Nut hooks PD2.3 and PD2.2

Used when a parallel line is required. Also used as tension hooks.
TYPE EAN d D mm L mm A mm TEST LOAD TEST LOAD WEIGHT (kg) PACK./pcs
Fx/kN Fy/kN
PD2.3 6418677401060 M16 38 76 20 15.4 2.0 0.383 25
PD2.2 6418677401053 M20 38 76 20 15.5 4.0 0.55 25
Nut hooks for external angles PD3.3, PD3.2 and SOT74
TYPE EAN d D mm L mm A mm TEST LOAD TEST LOAD WEIGHT (kg) PACK./pcs

Fx/kN Fy/kN
PD3.3 6418677406355 M16 16 206 20 9.7 6.2 1.23 10
PD3.2 6418677406348 M20 20 200 20 13.3 8.6 1.9 10
SOT74 6418677408021 M24 25 290 24 24.6 19.5 3.4 10
Screw hooks with wood thread SOT1.1, SOT16.10 and SOT16.12
TYPE EAN d L mm B mm A mm TEST LOAD TEST LOAD WEIGHT (kg) PACK./pcs

Fx/kN Fy/kN
SOT16.12 6418677410062 Ø12 165 85 16 5.3 4.1 0.24 50
SOT16.10 6418677407833 Ø16 170 90 16 8.8 6.6 0.44 30
SOT1.1 6418677407826 Ø20 165 85 18 16.6 12.9 0.73 40
43
Suspension Hooks
Band hooks SOT29 and SOT39
Used for steel and concrete poles. The band hooks are mounted on poles by using band and buckles. A
TYPE EAN D mm A mm K mm H mm C mm SMFL Fx/kN SMFL Fy/kN WEIGHT (kg) PACK./pcs Fx

D H
SOT29 6418677413544 Ø16 18 85 150 45 17.8 12.5 0.71 25
SOT39 6418677413551 Ø20 18 91 150 45 27.7 17.7 0.74 25
Fy
Universal hooks SOT76 and plate hooks SOT28

Plate hook SOT28 is for wall installations. Universal hook SOT76 is used with bands for pole and with sc- A
rews for wall installations:
D
H
Delivery includes:
SOT28, Hook without any screws.
SOT28.1, Hook and six slotted round head wood screws, 6.7x160/60 DIN 96, Soft wall. C K
SOT28.2, Hook and six hexagon head wood screws 6x50 DIN 571 and six plastic plugs 10x50, Concrete.
SOT 28.3, Hook and six hexagon head wood screws 6x50 DIN 571, Wood.
SOT76, Hook without screws.
SOT76.2, Hook and six hexagon head wood screws 6x50 DIN 571 and six plastic plugs 10x50.
TYPE EAN D mm A mm K mm H mm C mm SMFL Fx/kN SMFL Fy/kN WEIGHT (kg) PACK./pcs
SOT28 6418677413506 Ø16 18 67 200 96 17.4 13.3 0.67 25
SOT28.1 6418677413513 Ø16 18 67 200 96 17.4 13.3 0.84 25
SOT28.2 6418677413520 Ø16 18 67 200 96 17.4 13.3 0.74 25
SOT28.3 6418677413537 Ø16 18 67 200 96 17.4 13.3 0.735 25
SOT76 6418677413582 Ø16 18 67 200 96 16.6 12.6 0.61 25
SOT76.2 6418677419287 Ø16 18 67 200 96 16.6 12.6 0.65 25
Band COT37 and buckle COT36 for band hooks

Installation with tightening tool CT42.
COT37 6418677412196 Steel band 19 mm x 0.75 mm x 25 m, AISI301 2.875 25 m
COT36 6418677412189 Steel buckle for band COT37 0.013 100
Bracket for tension clamp SO253 and bracket for suspension clamp
SO260.2
SO253 is a bracket for anchoring. Made of corrosion resistant aluminium alloy. The bracket is easy to install
with screws as no special tools are needed. SO260.2 is a bracket for suspension clamp.
TYPE EAN SMFL kN WEIGHT (kg) PACK./pcs
SO253 6418677418907 22 0.11 25
SO260.2 6418677419065 15.5 0.21 50
44
Stay wire attachment fittings SH35 and SH187
Used for the attachment of stay wires to wooden poles. The plates are employed to prevent the stay wire
from cutting into the pole.
TYPE EAN STAY WIRE ROPE DIAMETER A mm B mm E mm WEIGHT (kg) PACK./pcs
mm² mm
SH35 6418677402203 25 Ø6.36 55 60 9 0.079 100
SH187 6418677402128 25-67 Ø6.36 – 10.60 100 95 11 0.2 50
Stay wire clamps CHLK25 and SH517

Used for the attachment of the upper end of the stay wire to the pole.
TYPE EAN STAY WIRE mm² ROPE A B C R mm SMFL kN PACK./pcs
DIAMETER mm mm mm
mm
CHLK25 6418677410772 25 Ø6.36 49 49 35 4.5 32 50
SH517 6418677414657 52-68 Ø9.20 – 10.60 60 60 48 6 95 25
Stay wire clamps CHK25.1 and SH49

Used for the attachment of the lower end of stay wire to anchor rod or other similar foundation accesso-
ries.
A
TYPE EAN STAY WIRE ROPE A B d L SMFL kN WEIGHT PACK./pcs
mm² DIAMETER mm mm mm (kg) B
d
L
mm
CHK25.1 6418677406294 25 Ø6.36-6.40 40 200 M12 300 32 0.715 20
SH49 6418677430022 25-68 Ø6.36-10.60 50 M16 300 88 (68 mm²) 1.57 25
CHK25.1
Stay wire sets SHS25P

The pre -assembled stay sets result in better logistics, smaller storage quantities and easier handling. The
sets include a stay wire, a wedge clamp, black and yellow stay wire marks, fixing plates and a stay wire
clamp or a stay iron with thimble.
SHS25P.110L 6418677407635 Upper end clamp, length 11.0 m 4.3 1
SHS25P.135L 6418677407659 Upper end clamp, length 13.5 m 5.0 1
SHS25P.110R 6418677407642 Upper end iron, length 11.0 m 4.9 1
SHS25P.135R 6418677407666 Upper end iron, length 13.5 m 5.6 1
Stay wire mark sets SH25, SH144 and SH45

Used for the marking of all stay wires. In the case of a previously installed stay wire, marks can be added by
simply splitting the plastic marks and pressing them around the wire. The combination of 6 yellow and 6
black marks guarantees good visibility. The material is weather and UV-radiation resistant plastic.
TYPE EAN STAY WIRE mm² INSIDE DIAMETER Total length mm WEIGHT (kg) PACK./pcs
mm
SH25 6418677402173 Fe 25 15 12x210=2520 0.19 25
SH144 6418677402081 Fe 67 25 12x210=2520 0.407 10
SH45 6418677402210 Fe 185 35 12x210=2520 0.54 5
Pole hats SP21, SP20, SP18 and SP19

Used for the protection of the tops of wooden poles. Fixed with hot-dip galvanised nails (provided in the
package). Made of weather and UV-radiation resistant plastic.
SP20 6418677405242 Diameter 170 mm 0.054 100
SP18 6418677405228 Diameter 190 mm 0.062 100
SP19 6418677405235 Diameter 230 mm 0.082 100
SP21 6418677452208 Diameter 270 mm 0.106 20
SP21
45
Pole base reinforcing sets SH0, SH1, SH2 and SH3
To reinforce wooden pole bases, weakened by decay or damage at ground level. Reinforcing sets are an
economical, easy and safe way to increase the lifetime of wooden poles.
TYPE EAN D mm L mm BOLTS POLE DIAM. mm WEIGHT (kg) PACK./pcs
1500
D
SH0 6418677406782 160 1500 M12 x 120 130-170 19.5 1 250
SH1 6418677406799 200 1500 M12 x 120 170-210 24.0 1
SH2 6418677407123 250 1500 M12 x 120 210-260 39.0 1
SH3 6418677414466 300 1500 M12 x 120 260-300 50.0 1
SH2
Anvil ST53
Anvil is used in driving pole base reinforcers into the ground.
ST53 6418677408649 21.0 1
Tightener ST55
It is easy to pull the reinforcer channels against the pole with the tightener. While ST55 holds the channels
in place, reinforcer tying bands can be readily put in their place around the reinforcer channels.
ST55 6418677408663 2.9 1
Tools
Wire brush ST18
In aluminium connections it is important to remove the Al-oxide from the aluminium surfaces by using a
wire brush. Use of joint compound SR 1 prevents further re-oxidation. ST18.2 is the case for ST18.
ST18 6418677405440 0.072 1
ST18.2 6418677405457 0.022 1
Joint compound SR1

Used for the prevention of oxidation on aluminium surfaces. The use of the wire brush and joint com-
pound SR1 reduces the contact resistance. It also protects the connection from corrosion. There are no skin
irritating ingredients in the grease.
SR1 6418677405402 0.254 25
46
Tools
Ratchet wrench CT164
For installation of connectors and suspension fittings. The wrench body is made of steel and the grip of oil
resistant rubber. The wrench is double-sided 13 and 17 mm.
CT164 6418677414213 0.254 20
Torque wrench ST30

For tightening connectors and fittings with standard sockets. With aluminium connectors, it is essential
that the bolts are tightened by using the correct torque. ST30 is a high quality adjustable wrench with
a wide torque range. The read-outs are given in Nm and lbs.-ft. Socket adaptor mount 1/2". Tightening
torque is 8-54 Nm.
ST30 6418677408755 0.89 10
Sockets for torque wrench ST30: ST12, ST13 and ST115
TYPE EAN SOCKET SIZE (mm), FORM WEIGHT (kg) PACK./pcs

ST12 6418677411557 17 mm, hexagonal 0.066 20
ST13 6418677411564 13 mm, hexagonal 0.056 20
ST115 6418677414138 19 mm, hexagonal 0.075 20
Allen key ST32

Approved also for insulation piercing connectors with conductors live.
TYPE EAN SOCKET SIZE (mm), FORM WEIGHT (kg) PACK./pcs
ST32 6418677405525 6 mm, allen key 0.079 25
Fork wrench ST34

The ST34 is for holding the connector while tightening the bolts. Approved also for insulation piercing
connectors with live conductors.
ST34 6418677405549 0.337 25
Wedges ST31 and ST192

During the installation of connectors the phase conductors of an insulated overhead cable can be separa-
ted by using wedges. The wedge can also be used when installing suspension clamps.
ST31 6418677405518 Two plastic wedges 0.109 10
ST192 6418677408588 Plastic wedge for LV ABC 0.14 10
47
Tools
Wedges PMR87 and PM154
During the installation of connectors, the phase conductors of an insulated overhead cable can be separa-
ted by using wedges. These wedges are left on the cable even after the installation.
PMR87 6418677408830 Wedge tool 4x95 mm², plastic 0.022 250
PM154 6418677408816 Distance wedge 4x50 mm², plastic 0.017 500
Wire stringing wheels ST26.1, ST26.11, ST26.22 and ST26.33

Used for pulling in overhead cables. ST26.1, ST26.33 and ST26.11 are used for straight lines and small angles
up to 30 degrees. Double pulley ST26.22 is used for larger angles up to 90 degrees.
ST26.1 6418677408625 Stringing wheel Cable groove 50 mm, nylon 1.458 10
ST26.11 6418677410116 Stringing wheel Cable groove 50 mm, nylon, with chain 3.9 3
attachment
ST26.22 6418677410123 Stringing wheel Cable groove diameter 50 mm, nylon with 6.25 3
chain attachment, double pulley
ST26.33 6418677410130 Stringing wheel Cable groove 77 mm, aluminium 2.172 5
Tightening tool CT42

CT42 is a special tool which is used for tightening the steel band COT37.
CT42 6418677412332 1.95 1
Pole climbing irons CT2

Made of Al-alloy. The irons can be adjusted with different sizes of wooden poles.
TYPE EAN POLE DIAM. mm WEIGHT (kg) PACK./pcs
CT2 6418677408786 140-300 4.2 1
Pole climbing irons ST155

Made of alloyed and heat-refined steel. The welded and forged areas of the irons, are tested for cracks.
Irons ST155 are supplied with straps.
TYPE EAN POLE DIAM. mm WEIGHT (kg) PACK./pcs
ST155.8 6418677408304 Max. 200 2.6 1
ST155.11 6418677408281 Max. 280 2.7 5
ST155.14 6418677408298 Max. 350 2.8 1
Come along clamps ST102 for four core cables

For tensioning overhead line spans of four core cables. The grips cover a wide range of diameters and can
apply high-tension force. ST102 uses an articulated construction. It is easy to mount and change on the
line.
ST102.50 6418677430770 Come along clamp 4x25-50 mm² 2.3 1
ST102.95 6418677430787 Come along clamp 4x70-95 mm² 4.31 1
ST102.120 6418677430794 Come along clamp 4x120 mm² 4.3 1
48
Tools
Come along clamps CT102 and CT105
For tensioning both bare and covered conductors overhead line spans. The grips cover a wide range of
diameters and make a good fixing and high tension force.
TYPE EAN CONDUCTOR DIAMETER mm WEIGHT (kg) PACK./pcs
CT102.501 6418677409196 7.87-13.46 1.7 1
CT102.1201 6418677409189 13.46-18.80 3.77 1
CT105.20 6418677416132 4-20 2.75 10
CT105.35 6418677416149 3-8 0.828 1
CT105.70 6418677416156 5-10 1.16 1
Pulling grip CT103

Pulling grips are made of high-grade galvanised steel wire, in a double weave construction for safe and
secure cable pulling. Grip length 600 mm.
TYPE EAN DIAMETER mm SMFL kN WEIGHT (kg) PACK./pcs
CT103.35 6418677412073 20-30 22 0.232 1
CT103.50 6418677412080 30-40 36 0.303 1
CT103.95 6418677412097 40-50 54 0.586 1
Dynamometer ST112
Used for setting the correct tension on all kinds of overhead line conductors. The dynamometers are light-
weight and compact. They have a built-in measuring dial with scales according to the maximum load.
TYPE EAN MAXIMUM LOAD kg STEP (kg) WEIGHT (kg) PACK./pcs
ST112.1 6418677414152 1000 20 1.179 1
ST112.2 6418677414169 2000 50 1.2 1
ST112.3 6418677414176 3000 50 2.3 1
Cable hoist ST116 and CT116

Ratchet puller for line tensioning.
TYPE EAN LIFT HEIGHT m, SINGLE/ CAPACITY kg, SINGLE/DOUBLE WIRE WEIGHT (kg) PACK./pcs
DOUBLE WIRE
ST116 6418677414183 3/1.5 500/1000 4.53 1
ST116.1 6418677414190 4/2 750/1500 5.000 1
CT116.3 6418677412158 4.57 (15 Ft) / 2.29 (7.5 Ft) 454 (1000 lbs) / 908 (2000 lbs) 6.39 1
CT116.7 6418677412165 9.15 (30 Ft) / 4.58 (15 Ft) 680 (1500 Lbs) / 1360 (3000 Lbs) 7.02 1
Swivel for conductor linking CT104

Swivels are essential for effective pulling operation of underground cables and overhead conductors. The
swivels are fitted with bearings to prevent build up of twist and loops in the cable or pulling rope. Rope
dia. 10 mm, working tension 10 kN.
CT104 6418677412103 0.45 20
49
Product index
Type Product description page
CHK25.1 Stay wire clamp 45
CHLK25 Stay wire clamp 45
CIL63 Automatic tension joints 29
CIL66 Automatic tension joint kit 29
COT36 Band hook 44
COT37 Band hook 44
CT1 Direction of rotation indicator CT1 for 400 V lines 37
CT102.1201 Come along clamp 49
CT103.35 Pulling grip 49
CT104 Swivel for conductor linking 50
CT116.3 Cable hoist 49
CT116.7 Cable hoist 49
CT164 Ratchet wrench 47
CT2 Pole climbing irons 48
CT42 Tightening tool 48
KE10.1 Branching connector 38
KE10.504N Branching connector 38
KG16 Busbar Connector 30
KG17 Cable lug 32
KG18 Cable lug 32
KG20 Connector for 400 A pole fuse switch 36
KG26.4 Busbar Connector 30
KG43.6 Connector for 400 A pole fuse switch 36
KG50 Cable lug 32
KG6.1 Busbar Connector 30
KG9 Cable lug 32
PD2.2 Nut hook 43
PD2.3 Nut hook 43
PD3.2 Nut hook 43
PD3.3 Nut hook 43
PEK41 Mounting rack 37
PEK43.1 Mounting rack 37
PEK49 Multi-bracket 36
50
PEM216 Marking set for pole fuse switch 36
PEM241.1 Marking set for pole fuse switch 36
PK553 End cap 24
PK555 End cap 24
PK99.025 End cap 24
PK99.050 End cap 24
PK99.095 End cap 24
PK99.2595 End cap 24
PM154 Wedge 48
PMR2635.4 Cover for KE10.504(N) 38
PMR87 Wedge 48
PSS10 Copper bar 31
PSS116 Earthing connector set 32
PSS127 Copper bar 31
PSS242.5 Copper bar 31
PSS396 Earthing bar 33
PSS396.1 Earthing bar 33
PSS85 Copper bar 31
SAL1.27 Shear head bolt cable lug 32
SE12.1 Copper to copper connector 28
SE12.101 Copper to copper connector 28
SE15 Earthing connector set 32
SE36 Copper to copper crimp connector 28
SE45.128-10 Surge arresters with insulation piercing connector 27
SH0 Pole base reinforcing set 46
SH144 Stay wire mark set 45
SH187 Stay wire attachment fitting 45
51
SH35 Stay wire attachment fitting 45
SH49 Stay wire clamp 45
SH517 Stay wire clamp 45
SHS25P.110L Stay wire set 45
SHS25P.110R Stay wire set 45
SHS25P.135L Stay wire set 45
SHS25P.135R Stay wire set 45
SJ0.47 Cable connectors with shear head bolts 32
SK160 Branch box 40
SK175 Branch box 40
SK180 Branch box 40
SK180.25 Fuse box 39
SK180.63 Fuse box 39
SL11.118 Insulation piercing connector 23
SL14.2 Aluminium / copper to aluminium / copper connector 27
SL19.4 Multi-connector 26
SL2.11 Aluminium to aluminium connector 26
SL29.4 Multitap Insulation piercing connector 24
SL29.8 Multitap Insulation piercing connector 24
SLIP12.05 Insulation piercing connector 22
SLIW11.1 Waterproof insulation piercing connector 25
SLIW50 Insulation piercing connector 22
SLJ1.27 Cable connectors with shear head bolts 32
SJL2.47 Cable connectors with shear head bolts 32
SM1.11 Aluminium to copper connector 27
SM2.24 Earthing connector set 32
SM6.21 Insulation piercing connector 24
SN2.2 Terminal clamp 21
SO103 Multi-cleat 41
52
SO118.1201S Tension clamp 17

SO125 Wall mounted clamp 40
SO130 Suspension clamp 18
SO130.02 Suspension clamp 18
SO141 Tension clamp 21
SO157.1 Tension clamp 16
SO234S Tension clamp 16
SO253 Bracket for tension clamp 44
SO260.2 Bracket for tension clamp 44
SO277 Distance nail 41
SO277.1 Distance nail 41
SO279 Light Pole Bracket 41
SO72.1 Distance clip 42
53
SOT1.1 Screw hook 43

SOT101.1 Suspension hook 43
SOT21 Suspension hook 42
SOT28 Universal hook 44
SOT28.1 Universal hook 44
SOT29 Band hook 44
SOT39 Band hook 44
SOT4.10 Double arming bolt 43
SOT74 Nut hook 43
SOT76 Universal hook 44
SP14 Insulating cover 29
SP18 Pole hat 45
SP19 Pole hat 45
SP20 Pole hat 45
SP21 Pole hat 45
SP24 Insulation cover 26
SP25 Insulation cover 26
SP38.3 Flexible bird protector set 31
SP42 Terminal cover sets SP42 for 160 A pole fuse switches 35
SR1 Joint compound 46
ST102.120 Come along clamp 49
ST112.1 Dynamometer 49
ST115 Socket for torque wrench 47
ST116 Cable hoist 49
ST116.1 Cable hoist 49
ST155.11 Pole climbing irons 48
ST18 Wire brush 46
ST18.2 Wire brush 46
ST192 Wedge 47
ST196.2 Earthing device 38
54
ST197.2 Earthing device 38

ST26.1 Wire stringing wheel 48
ST26.99 Extension roller 18
ST30 Torque wrench 47
ST31 Wedge 47
ST32 Allen key 47
ST33 Operating rod 37
ST34 Fork wrench 47
ST53 Anvil 46
ST55 Tightener 46
ST97 Voltage indicator 37
ST97.1 Voltage indicator 37
SV15 Branching connector set 38
SV15.06 Lamp post fixture 39
SV15.5 Branching connector set 38
SV29.25 Fuse fixture without connector 39
SV29.2511 Fuse fixture including connector 39
SV29.63 Fuse fixture without connector 39
SV50 Branching connector set 38
SV50.11 Branching connector set 38
SVV1.06 Fuse base 38
SVV1.10 Fuse base 38
SVV3 Circuit breaker 39
SVV3.2 Circuit breaker 39
SZ151 Pole fuse switch 34
SZ152.01 Pole fuse switch 34
The information in this brochure is to the best of Ensto´s knowledge and belief correct and reliable. We reserve the right to make changes in the specifications,
materials and production methods without further notice. Be aware of that you have to evaluate independently the suitability of each product for the intended
application. Ensto does not give any assurance of any particular quality or performance. Our responsibilities for the products are set forth in the “Orgalime S 2000
General Conditions for the Supply of Mechanical, Electrical and Electronic Products”. The products shall be installed only by a competent person having nationally
required knowledge. Ensto is not responsible for its distributors or for any misuse, incorrect installation or ignored national safety or other national provisions.
Copyright Ensto Oy 2009, Ensto ™
55
UN29ENG/06/2011/2000/Adsek/Hämeen Kirjapaino Oy
Ensto Finland Oy
Ensio Miettisen katu 2, P.O. Box 77
FIN-06101 Porvoo, Finland
[email protected]
www.ensto.com

Open ENSTO Low Voltage Overhead Line Equipment

Uploaded by

Copyright:

Available Formats

Open ENSTO Low Voltage Overhead Line Equipment

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Open ENSTO Low Voltage Overhead Line Equipment

Uploaded by

Copyright:

Available Formats

Accessories for Low Voltage

Ensto Four Core Products

The company has also had an easy-going re-

An insulated messenger wire cable consists of one to five

Regular deliveries to Surinam

Ensto has developed solutions and integrated product pack-

ABC project in India

Ensto offers a revolutionary family of connectors. The SLIW 50

Technical information about Ensto Connec-

Cable Lugs, Earthing Connectors and Earthing Bars

Pole Fuse Switch Disconnectors

Lamp Post Fixtures

Stay Wire Accessories and Pole Base Reinforcers

Tension clamps SO157.1 and SO158.1

Tension clamps SO80 and SO80.225

Tension clamp SO234S

Tension clamp SO274S

Tension clamp SO118.425S 203

Tension clamps SO118.1201S

Tension clamp SO118.1202S

Suspension clamp SO99

Suspension clamp SO270

Suspension clamps SO130 and SO130.02

Suspension clamps SO136 and SO136.02

Suspension clamp SO265.1

Suspension clamp SO69.95

Tension clamps SO250

Tension clamp SO65.1

Tension clamp SO243

Tension clamp SO28

Tension clamp SO141

SMFL for various messenger cross-sections are as follows: 81

Terminal clamps SN2.2, SN3.3 and SN3.31

TYPE EAN MESSENGER MESSENGER SMFL kN TIGHTENING WEIGHT (kg) PACK./pcs

Tension clamp SO65

Suspension clamp SO214

Waterproof insulation piercing connector SLIW50

Waterproof insulation piercing connector SLIW54

Waterproof insulation piercing connector SLIW57

Waterproof insulation piercing connector SLIP12.05

Insulation piercing connector SLIP12.127

Insulation piercing connector SLIP22.1

Insulation piercing connector SLIP22.127

Insulation piercing connectors SLIP32.2 and SLIP32.21

Insulation piercing connector SL11.118

Insulation piercing connectors SL9.11 and SL9.2

Insulation piercing connector SM6.21

End caps PK99

End caps PK553 and PK555

Waterproof insulation piercing connector SLIW15.1

Waterproof insulation piercing connectors SLIW17.1 and SLIW17.2

Aluminium to Aluminium Parallel Groove Connectors

Aluminium to aluminium connectors SL37.1 and SL37.2

Aluminium to aluminium connectors SL37.201

Aluminium to aluminium connector SL2.11

Aluminium to aluminium connectors SL4.21, SL4.25 and SL8.21

Insulation covers SP24 and SP25 100

Surge arresters with insulation piercing connectors SE45

SE45.128-10 6418677428937 SGA128-10 280 10 - 0.22 20

Surge arresters with insulation piercing connectors SE46