QUILOSA PROFESSIONAL MS 35 Construction

Sealing and Bonding

It is one of the most multi-functional elastomers. Based on the MS Hybrid Technology by Selena, it is a great
product to seal any joint or to bond any building material. Recommended to seal all kind of joints in
construction, gutters, aluminium joinery, PVC or wood. It also is an excellent product to bond metal, plastic,
mirrors, insulation panels or wood on construction, boats and caravans. Apart from its elasticity, resistance to
abrasion and its resistance to UV and weather conditions, the feature that makes it special is its capacity to
adhere on dump surfaces, even under water. It is odourless and free from isocyanates.

BENEFITS

Single-component, easy application from +5ºC to +50ºC.

Adheres without primer to the most common materials in construction and industry (glass, ceramic,
wood and derivatives, metals, PVC, methacrylates, polyester, etc.).
Neutral. It does not corrode metals or attack alkaline substrates (concrete and brick etc.).
Remains flexible from –40ºC to +90ºC.
Paintable. It does not contaminate further coats of paint.
Adheres in moistures surfaces.
Does not stain sides of joints.
Anti-mold. It does not blacken.
Excellent UV resistance and weatherability.

INTENDED USE

Sealing and bonding in construction and industry.

Sealing of bathroom and kitchen fittings.
High mould resistance.
Sealing metal roofs.
Sealing paintable cracks.
Sealing and bonding of all types of materials in DIY.
Bonding mirrors.

1/7
NORMS / ATESTS / CERTIFICATES

Mark CE

EN 15651-1 F EXT- INT- CC / EN 15651-3 S / EN 15651-4 PW- EXT- INT- CC

The product meets requirements of:

EMICODE: EC1 PLUS

Tests performed

VOC Emission - Indoor Air Comfort GOLD®. Test Report nº 392-2016-00152101_A_EN.

VOC Test Report: M1. Test report nº 392-2016-00152101_I_EN

According to the results obtained in test no. 392-2016-00152101_A_EN, the product complies with the
requirements of the regulations or protocols indicated below

French VOC Regulation: A+ Classification

French CMR Components, Regulation of March and April 2011 (DEVL1101903D and DEVL1104875A)
Indoor Air Comfort® and Indoor Air Comfort GOLD®
BREEAM International
Blue Angel (RAL UZ 123 for "Low-Emission Sealants for Interior Use")
Belgian Regulation, Royal decree of May 2014 (C-2014/24239)
AgBB

According to the results obtained in test no. 392-2016-00152101_I_EN, the product complies with the
requirements of the regulations or protocols indicated below

M1

FDA CFR21 § 177.2600 (e) for indirect food contact.

IANESCO. E16-02573-1

2/7
TABLES

Sealing depth will be chosen depending on the width of the joint, according to the
following Table (values in mm.):

WIDTH 5/6 7/9 10/12 12/15

DEPTH 5 6 7 8

TECHNICAL DATA

Appearance Value

Homogeneous creamy paste +

Uncured Value

Slump resistance (ISO 7390) [mm] <3

Tack free (ASTM C-679-71) [min] 15

Skin over time (BS 5889 Ap.A) [min] 25

Curing rate (23°C and 55% h.r.) [mm/24h] 3-4

Shrinkage (ISO 10563) [%] <5

Flash point (DIN 51794) [°C] 430

Application temperature [°C] 5 - 50

Cured, (4 weeks at 23ºC and 55% H.R.) Value

Similar to rubber +

Shore A hardness (ISO 868) 40

Modulus 100% (ISO 37) [MPa] 0.9

Tensile strength at break, ISO 37 [MPa] 2.2

Elongation at break (ISO 37) [%] 400

Movement accommodation factor [%] 20

Temperature resistance [°C] -40 - +90

3/7
 Chemical resistance Value

Water, soapy water, brine +++

Inorganic diluted acids and alkalis ++

UV and Weather resistance ++

METHOD OF USE

Prior to application, read safety instruction presented in MSDS.

Surface preparation

Surfaces to be sealed must be clean and dry.

If necessary, in addition to mechanical means, cleaning with non-grease solvent such as acetone is
recommended.
Depth of sealant is chosen on the basis of the joint's width, according to the table (in mm):
For joint widths greater than 16 mm, and up to 35 mm depth must be one half of width.
A filler should be used in order to avoid adhesion of product to the bottom of the joint, this would
exercise unnecessary tension on the sealant. Meanwhile, regulation of its depth is achieved as well as
greater yield. The material to be used must be inert, mechanically stable, homogeneous, corrosion-
resistant, and must not adhere to either the sealant or contiguous materials.
A particularly recommendable product is closed-cell polyethylene foam, extruded in regular-section
strips, such as our POLITEN-CEL.

Product preparation

Cut off cap from adapter nipple.

Screw the nozzle on the cartridge.
Clip the tip of the nozzle to required opening.
Insert it into applicator gun.

Application

Fill in the appropriately treated joint with product.

For a better finish, protect the edges of the joint with adhesive tape and smooth with a spatula,
removing the tape before the sealant forms skin.
Instructions for bonding:
For the bonding of materials, apply the product on one of the surfaces to be joined in fine,
discontinuous and vertical cords that allow the subsequent circulation of air, and press the panel or
object on the substrate, avoiding as far as possible the rectifications. In many cases it will be convenient
to hold the panel or object with chocks or another system for a minimum of 24-48 hours.
4/7
Works after completion of application

Fresh product is easily removed with an organic solvent. When cured it can be removed by mechanical
mean only.

Remarks / restriction

Requires no protection from the weather.

It can quite easily be painted with any acrylic paint as long as it is sufficiently elastic.
However, due to the great diversity of varnishes and paints, it is recommended to do a preliminary test.
The drying time of alkyd resin based paints may increase.
The following formula is an approximate guideline to calculate foreseen yield:
Yield: L= V/(AxD), where, L = Length of sealant in metres obtained per container. V = Volume of the
container. A = Width of the joint in mm. D = Depth of the joint in mm.
Any material not known by the user, from the point of view of adherence, must be previously tested or
consult our Technical Department.

REMARKS / RESTRICTION

It is advisable to carry out a preliminary test on materials in which there is no previous experience with this
product. Our Technical Department is available for any type of consultation or test.

Chemical Resistances: +++ Excellent / ++ Very Good / + Good / -- Very bad / - Bad / * Consult.

The information contained herein is offered in good faith based on Selena’s research and is believed to be
accurate. However, because conditions and methods of use of our products are beyond our control, this
information shall not be used in substitution for customer’s tests to ensure that Selena’s products are fully
satisfactory for your specific applications. Selena’s sole warranty is that the product will meet its current sales
specifications. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or
replacement of any product shown to be other than as warranted. Selena FM S.A. specifically disclaims any
other expressed or implied warranty of fitness for a particular purpose or merchantability. Selena disclaims
liability for any incidental or consequential damages. Suggestions of use shall not be taken as inducements to
infringe any patent. Technical indications and data appearing in this brochure are based on our current
knowledge and experience and we decline all responsibility for consequences derived from inadequate use.
Therefore, our guarantee is limited exclusively to the quality of the product supplied. This technical
information can be modified without notice. If necessary request it periodically.

5/7
TRANSPORT / STORAGE

Keep in a cool, dry place.

Store in its original closed package.

Shelf life: 18 months.

CATALOGUE DATA

Number of
Nominal
pieces per
capacity / Colour Catalogue Number Index EAN Code
collective
volume / size
package

300 ml black 24 QSA-QHYBSEA1-QP-35-ml-300-004 10043797 8411729612917

300 ml brown 24 QSA-QHYBSEA1-QP-35-ml-300-027 10042929 8411729209827

300 ml grey 24 QSA-QHYBSEA1-QP-35-ml-300-074 10043791 8411729600204

RAL 1015
300 ml 24 QSA-QHYBSEA1-QP-35-ml-300-181 10042714 8411729147792
light ivory

300 ml white 24 QSA-QHYBSEA1-QP-35-ml-300-001 10043798 8411729613259

600 ml brown 12 QSA-QHYBSEA1-QP-19-ml-600-027 10042804 8411729175412

600 ml grey 12 QSA-QHYBSEA1-QP-19-ml-600-074 10043907 8411729971052

600 ml white 12 QSA-QHYBSEA1-QP-19-ml-600-001 10043904 8411729966935

6/7
SAFETY AND HEALTH PRECAUTIONS

While curing the product issues methanol. These vapours must not be inhaled for prolonged periods of time or
in high concentration levels. Therefore, the working area should be well ventilated.

Due to possible irritation, all contact of the product with eyes or mucous areas must be avoided. If contact
occur, rinse the affected area thoroughly with plenty of water and, if necessary, see a doctor.

Use gloves. In case of splashing, wash with industrial detergent when the product is still fresh.

DO NOT WASH HANDS WITH SOLVENTS.

For more information request Safety Data Sheet.

7/7
Update date: 06.06.2023