Avanti High Performance Centrifuges

JXN Series & JE Series

Versatility. Performance. Reliability.
ADDRESS EVERY POINT OF YOUR WORKFLOW,
OPTIMIZATION AND PREPARATION
SPECIALTY LABWARE
Disposable Harvest Liners simplify 1 liter wide mouth polypropylene
the processing of large samples bottle features that maximize
your workflow
• Convenient sample recovery and
long term sample storage • Achieve 9,000 rpm in the
JLA-9.1000 rotor
• Enhances operator safety and
efficiency. • AutoVent plug and polyphenylene JLA-9.1000 rotor support
sulfide cap provide greater 4 x 1 Liter polypropylene
• Easy-to-use, low-cost sample bottle fit with the harvest
chemical resistance
containment liners system

Eliminate steps, maximize time and minimize cross

contamination with less hands-on sample handling.

WORKFLOW OPTIMIZATION FROM BEGINNING

TO END OF SAMPLE PREPARATION
CELL HARVESTING
Cell
Maximize cell harvest volume. Large-volume
Harvesting/ processing rotor gives you efficiency and high
Pelleting throughput by processing up to 6 liters.

EXOSOME PREPARATION (COMBINATION)

Isolate microparticles with the gold standard
of exosome preparation. Efficient and fast
Supernatant
sample preparation solutions customized
Retention for each step in your specific exosome
research workflow, including small volume
rotors JS-24.38 and JA-25.50.

Cell Lysis
CELL HARVESTING
Exceptional high-throughout performance for
scaling up protein production workflow. Save
Debris
time and increase efficiency of cell pelleting
Clearing with the JCF-Z continuous. Our rotor system
processes large sample volumes capable of
reaching up to 800 mL pellet size.

VIRAL VECTOR PREPARATION

Achieve greater than 100,000 x g and
Product purify your exosome by density gradient
Processing centrifugation using our Avanti JXN 30
in combination with the JS-24.15 or
JA-14.50 rotors.

Brilliance at Every Turn

INCREASE PERFORMANCE AND RELIABILITY

BROAD FUNCTIONALITY
AND APPLICATIONS
• Beckman Counter rotor range adds versatility and
complements ultra speed range
• We offer three titanium rotors rotors (JA-30.50Ti,
JS-24.38, JS-24.15) that are capable of reaching
speeds greater than 100,000 x g
• Easy loading with lower height and ergonomic
rotor design

SAMPLE PROTECTIONS WITH

EXCEPTIONAL TEMPERATURE
CONTROL
• Extensive profile of rotors that are made of a
single piece of aluminum, which is better
conductive of temperature.
• Our JXN-30 runs all rotors at the ideal 4° C
• Sample loading and unloading while rotor is
integrated to the centrifuge system makes for
a more efficient and less cumbersome and labor
intensive process

PROTECT YOUR SAMPLE AND

STANDARDIZE METHODS
• We have been manufacturing High Performance
centrifuges for nearly 50 years with a consistent
rotor library to fit retrocompatibility

MAXIMIZE LAB SAFETY

• Our centrifuges are equipped with
pharmaceutical-grade sterilizing filters
and easy toolless replacement
• Rotor biocontainment protects
lab personnel from labware failure
INCREASE PERFORMANCE AND RELIABILITY,
FASTEST HIGH PERFORMANCE IN THE MARKET
Avanti JXN Series
BUILT FOR VERSATILITY
AND PERFORMANCE
To overcome the everyday challenges of a shared
laboratory facility, choose one of the two Avanti
high performance centrifuges.

• Widespread use in biologics production.

• Compatible with an extensive rotor library – Choose
from a wide variety of high performance rotors
to cover application from large-volume pelleting
to high speed subcellular fractionation to cell
separation.
• Large touchscreen interface and additional multi
user support enhances control and usability.

Avanti JXN 30 Avanti JXN 26

Working
4.0 Liter 6.0 Liter
Capacity

Speed Up to 110,500 x g RCF Up to 81,200 x g RCF

Avanti JE
HIGH VALUE IN A TRUE HYBRID
Make the most out of your workspace and workflow.

• Achieve high performance and up to 4.0 Liter

processing capacity in a compact foot print
• Speeds up to 53,300 xg RCF with efficient
acceleration and deceleration profiles
• The Avanti JE offers an intuitive, user-friendly
interface, as well as lower energy costs.

Brilliance at Every Turn

AVANTI JXN USER-FRIENDLY SOFTWARE
INTUITIVE INTERFACE REMOTE MONITORING
• Personalized user profile with • Network the Avanti JXN to set
user login and admin control up, monitor and control your
centrifuge remotely
• Experiment Diagnostics shows
real-time run display of time, • Receive alerts and diagnostics
speed, and chamber temperature remotely via email or SMS
in graph
• Visual color status gives early
warning of any protocol variations
• Run History records all run
details, error messages, and it
can be exported in Excel format

LARGE INTUITIVE
TOUCHSCREEN
• Very clear and visible for users
• Makes setting and viewing
parameters very easy
• Rotor code identification gives
the option of setting rcf or rpm
• Independent overspeed control
(windage & inertia check) ensures MOBILE CONTROL
safe rotor operation • Mobilefuge mobile application
• 10 levels of acceleration and controls, schedules and monitors
deceleration control runs remotely

BUILT-IN SAFETY AND EFFICIENCY WITH ROTOR INNOVATIONS

• DRIC Dynamic Rotor Inertia Check makes sure that • Exceptional performance meeting evolving
rotors are not run beyond their maximum speed. application needs, from academic research to
production facilities, with up to 110,500 x g
• Lightweight 6 x 1 L JLA-8.1000 rotor offers the
with the JXN 30 and up to 6 liters capacity
most efficient pelleting for large volumes and
with the JXN 26.
easy handling and cleaning because of its
modular design. • Versatile, high-throughput sample processing
from 6 x 1 L bottles, to 28 x 50 mL conical tubes,
• Foot pedal for hands-free door opening and an
to 24 microplates per run. Save time and ensure
integrated surface work space optimize everday use.
sample integrity with fast acceleration and
• Proven reliability with robust design for consistent deceleration rates, combined with smooth runs
results and maximum uptime, year after year. at all speeds.
ROTOR SPECIFICATIONS
Application

Speed
P SF LH CM NA C V B
Rotor Capacity (RPM/RCF)

400 mL 30,000
JA-30.50 Ti
(8 x 50 mL) 108,860        

400 mL 25,000
JA-25.50
(8 x 50 mL) 75,600        

360 mL 25,000
JA-25.15
(24 x 15 mL) 74,200       

180 mL 21,000
JA-21
(18 x 10 mL) 50,400       

480 mL 20,000
JA-20.1
(32 x 15 mL) 51,500       

400 mL 20,000
JA-20
(8 x 50 mL) 48,400       

43.2 mL 18,000
JA-18.1
(24 x 18 mL) 42,100       

1,000 mL 18,000
JA-18
(10 x 100 mL) 47,900       

700 mL 17,000
JA-17
(14 x 50 mL) 39,800       

1,500 mL 16,000
JLA-16.250
(6 x 250 mL) 38,400       

800 mL 14,000
JA-14.50
(16 x 50 mL) 35,000        

1,500 mL 14,000
JA-14
(6 x 250 mL) 30,100        

600 mL 12,000
JA-12
(12 x 50 mL) 23,200      

3,000 mL 10,000
JLA-10.500
(6 x 500 mL) 18,500       

3,000 mL 10,000
JA-10
(6 x 500 mL) 17,700       

Brilliance at Every Turn

 Application

Speed
P SF LH CM NA C V B
Rotor Capacity (RPM/RCF)

4,000 mL 9,000
JLA-9.1000
(4 x 1000 mL) 16 800       

6,000 mL 8,000
JLA-8.1000
(6 x 1000 mL) 15 970       

231 mL 24,000
JS-24.38
(6 x 38.5 mL) 103 900        

300 mL 13,000
JS-13.1
(6 x 50 mL) 26 500       

2,000 mL 5,300
JS-5.3
(4 x 500 mL) 6130        

4,000 mL 4,000
JS-4.0
(4 x 1000 mL) 4,050       

WORKFLOW P (Protein) SF (Subcellular Fractions) LH (Lysate/Tissue Homogenates)

APPLICATIONS KEY CM (Clearing Media) NA (Nucleic Acid) C (Cells) V (Viruses) B (Blood)

Workflow Avanti Avanti

JCF-Z Capacity
application JXN-30 JXN-26

20,000
Std. Core 400 mL
39,900

20,000
Large Core 800 mL
39,900

Debris cleaning,
large particle 20,000
Small Core 200 mL
separation and 39,900
cell pelleting

20,000
Regrad Core 1,500 mL
39,900

20,000
Zonal Core 1,650 mL
39,900
COMPLIANCE AND TECHNICAL SUPPORT
• At Beckman Coulter, engineering , sales, support, training and service work
together to offer comprehensive and extensive customer focused products.
• Expert service engineering team strives for “Fix It Right the First Time.”
• Certifications of Compliance.

Specifications Avanti JXN-26 Avanti JXN-30 Avanti J-E

Max. Speed/g-Force 26,000 rpm/81,770 x g 30,000 rpm/110,500 x g 21,000 rpm/53,300 x g

Max. Capacity 6 Liters 4 Liters 4 Liters

1,000 to 10,000:± 10 rpm 1,000 to 10,000:± 10 rpm

Speed Control ±50 rpm of set speed
10,001 to max: ±0.1% 10,001 to max: ±0.1%

Set Temperature -10° C to 40° C in 1° increments -20° C to 40° C in 1° increments -10° C to 40° C in 1° increments

±2° C of chamber temperature ±2° C of chamber temperature

Temperature Accuracy
(after equilibration) (after equilibration)

Ambient Operating
16° C to 38° C 16° C to 38° C 15° C to 35° C
Range

Accel/Decel Profiles 11/12 11/12 2/3

Heat Output 5,120 BTU/hr (1.5 kW) 5,120 BTU/hr (1.5 kW) ≤6,900 BTU/hr (2.0 kW)

Drive Type/Cooling SR* drive/Air-Cooled SR* drive/Air-Cooled SR* drive/Air-Cooled

Non-CFC, non-ozone Non-CFC, non-ozone Non-CFC, non-ozone

Refrigeration
depleting refrigerant depleting refrigerant depleting refrigerant

<62 dBa (1 m in front of the <62 dBa (1 m in front of the <64 dBa (0.91 m/3 ft from
Sound Level
instrument, 1.5 m above the floor) instrument, 1.5 m above the floor) instrument at max. speed)

71 W x 86 D x 86 H cm 71 W x 86 D x 86 H cm 63.5 W x 80 D x 91.4 H cm
Dimensions
(28 W x 34 D x 34 H in) (28 W x 34 D x 34 H in) (25 W x 31.5 D x 36 H in)

Weight 290 kg (640 lb) 310 kg (680 lb) 267.4 kg (589 lb)

Providing 70 years of global leadership in centrifugation, Beckman Coulter

Life Sciences designs, manufactures, sells, and services a complete line of
centrifuge systems. By offering unique rotors and innovative bottles, tubes
and accessories, coupled with advanced centrifugation software, Beckman
Coulter delivers intelligent centrifugation solutions to laboratory science.

Learn more at beckman.com

© 2017 Beckman Coulter, Inc. All rights reserved. Beckman Coulter, the stylized logo, and the Beckman Coulter
product and service marks mentioned herein are trademarks or registered trademarks of Beckman Coulter, Inc.
in the United States and other countries.

For Beckman Coulter’s worldwide office locations and phone numbers, please visit “Contact Us” at beckman.com

CENT-2787SB06.17