GRADE: 9

SUBJECT: Chemistry
CHAPTER: IS MATTER AROUND US PURE?(Notes)

Matter can be classified into two types, on the basis of chemical properties – Pure substances and Mixtures

Pure substance:
A substance that consists of only one type of particle is called a Pure Substance. For Example, Diamond, Salt,
Sulfur, Tin.
Mixture:
When we combine different substances into each other a mixture is formed. For Example, Lemonade is a
mixture of three substances, Lemon Juice, Sugar and Water.
Types of Mixtures
There are two categories of mixtures: Homogeneous Mixtures and Heterogeneous Mixtures
Homogenous Mixtures
• A mixtures in which the components mix with each other uniformly are called Homogenous Mixtures.
• The ratio of compositions of homogeneous mixtures can be different. For Example, one may add two spoons
of sugar in lemonade while someone else may add only one spoon of sugar in their lemonade. Still, lemonade
is a homogeneous mixture.
Heterogeneous Mixtures
• The components in a heterogeneous mixture do not completely dissolve in each other and we can separate
them by physical means. In other words, the composition of such mixtures is not uniform.
• For Example, If we mix sand in water the sand settles down in water after some time and we can separate it
by filtration.
Differences between homogeneous and heterogeneous mixtures –
Homogenous Mixtures Heterogeneous Mixtures

They have a uniform composition throughout They have a non-uniform composition

We cannot separate the components of the mixture
We can separate the components through physical processes
through physical processes

Page 1 of 5
Components cannot be seen through naked eyes Components can easily be seen through naked eyes
The substances can be of two different phases and we may see
The mixture is in single phase throughout
separate layers of the substances
Example: A mixture of water and milk Example: A mixture of oil in water

Solution:
A solution is nothing but a uniform mixture of two or more substances. Homogenous Mixtures are solutions.
Solution of -
• Liquid into liquid: Water and Ink
• Solid into solid: Alloys
• Gas into gas: Air
• Solid into liquid: Sugar solution (Sugar and Water)
• Liquid into gas: Soda water (Carbon Dioxide and Water)

Alloy: An alloy is a mixture of different metals or non-metals and metals that cannot be separated from each
other using physical methods. For Example:
Brass – Copper with up to 50% zinc
Bronze – Copper with up to 12% tin
• Solution constitutes of two types of substances, a solute and a solvent.
Solution = Solute + Solvent

Solvent – The substance in which another substance is mixed is called the Solvent.
For Example, Water is a solvent in which we can mix different substances such as salt or sugar.
Solute – The substance that is added to the solvent to form a solution is called a Solute.
For Example, Salt, when mixed in water, acts as a solute for the mixture.

Properties of a Solution:
• A solution is a homogenous mixture.
• We cannot see the particles of a solution through naked eyes as they as are small as 1 nanometer in diameter.
• The path of light is not visible through the solution. The particles of a solution do not scatter light through
them as they are extremely small.
• We cannot separate the particles of a solution by methods of filtration.
What is a stable solution?
A stable solution is a solution in whose particles do not settle down if we leave the solution undisturbed for some
time. This is because the particles of a stable solution are homogeneously spread.
Page 2 of 5
 Different Types of Solutions
• Dilute solution: – A solution in which the concentration of the solute is much less than that of the solvent.
• Concentrated Solution – A solution with a large amount of solute is called a Concentrated Solution
• Unsaturated Solution – A solution, in which we can add more amount of solute as it has not achieved its
saturation level yet, is called an Unsaturated Solution. A dilute solution can be called as
an Unsaturated Solution.
• Saturated Solution – A solution in which no more solute can be added since it has already dissolved the
maximum amount of solute it can is called a Saturated Solution.

Concentration refers to the amount of a substance per defined space or can be defined as the ratio of solute in a
solution to either solvent or total solution.
To calculate the concentration consider the formulae below:
• Percent by Mass = (Mass of solute / Mass of solution) X 100
• Percent by Volume = (Volume of solute / Volume of solution) X 100

Suspension:
A suspension is formed when two or more substances are mix in a non-uniform manner. Heterogeneous mixtures
are suspensions. The solute does not mix with the solvent and can be viewed through naked eyes.
Properties of Suspensions:
• A suspension is a heterogeneous mixture.
• We can see the particles of suspensions through naked eyes.
• We can see the path of light through the particles of a suspension.
• The particles of suspension tend to settle down when left undisturbed. Then, they can be separated using
filtration.
Colloids or colloidal solutions:
A colloidal solution or a colloid is a uniform solution of two or more substances. The particles are relatively very
small that the solution appears as a homogeneous mixture but it is not.
Properties of colloids:
• Colloids are heterogeneous in nature.
• The particles of a colloid cannot be seen through naked eyes.
• The particles scatter a beam of light passed through a colloid and produce Tyndall effect.
• Colloids are stable in nature. The particles of colloids do not settle down if left uninterrupted.
• We cannot separate the particles of a colloid through filtration. We use a method called Centrifugation to
separate the particles of a colloid
Page 3 of 5
 Tyndall effect: When a beam of light is passed through a colloid the particles of the colloid scatter the beam of
light and we can see the path of light in the solution. For Example, when a ray of light enters a dark room it is
scattered by the dust particles present in the air and we can see the path of light clearly.
Classification of Colloids
Dispersed Phase – The dispersed particles or the solute-like components in a colloid
Dispersing Medium – The substance in which these solute-like particles are added
Based on the state of the dispersing medium colloids are classified as:
Types of Colloids
Example Dispersing Medium Dispersed Substance Colloid Type

Fog, Aerosol sprays Gas Liquid Aerosol

Smoke, Airborne bacteria Gas Liquid Aerosol

Whipped cream, Soap suds Liquid Gas Foam

Milk, Mayonnaise Liquid Liquid Emulsion

Paints, Clays, Gelatin Liquid Solid Sol

Marshmallow, Styrofoam Solid Gas Solid foam

Butter, cheese Solid Liquid Solid emulsion

Ruby glass Solid Solid Solid sol

Physical Change and Chemical Change

Physical Property of a Substance:
Properties of a substance such as rigidity, colour, fluidity, boiling point, melting point, density and hardness
which we can observe are called as Physical Properties.
Physical Change:
When physical properties of a substance change it is known as a Physical Change. When we convert a substance
from one state to another, such as a solid into a liquid or vice-versa, it is also a physical change as only the
physical nature of the substance changes without affecting its chemical nature.
For Example, Change of ice into water. The chemical properties of water remain the same.
Chemical Property of a Substance:
The chemical nature of a substance is known as its Chemical Property such as its odour or its chemical
composition.
Chemical Change:
When the chemical properties or chemical composition of a substance gets altered it is called a chemical change.
It is also called as a Chemical Reaction.
Page 4 of 5
For Example, Burning of paper
Types of Pure Substances
Pure substances are classified as elements and compounds
Elements
An element is the simplest form of matter. Elements cannot be broken down into further elements by chemical
reactions. Elements are further characterized as Metals, Non-Metals and Metalloids
Metals – Silver, Mercury, Copper, Gold
1. Metals are lustrous (shiny)
2. Metals conduct heat and electricity
3. Metals have a silver-grey or gold-yellow colour
4. We can hammer metals and form thin sheets (Malleability)
5. We can convert metals into wires (Ductility)
6. Metals always produce a ringing sound if they are hit (Sonorous)
Non-Metals – Carbon, Iodine, Chlorine, Oxygen, Hydrogen
1. Non-Metals do not conduct heat and electricity
2. Non-Metals are not sonorous, lustrous or ductile
3. Non-Metals have varied colours
Metalloids – Silicon, Germanium
They show some properties of metals and some of the non-metals.

Compounds
It is a substance that consists of two or more substances. These substances are combined chemically with each
other in fixed proportions. The properties of a compound are different than that of its constituents. For Example,
Ammonium Sulphate, Sulphur Chloride, Water.
Mixtures vs. Compounds
Mixtures Compounds

Properties of a mixture Reflect the properties of the Different properties from that of the elements that make up
materials it contians. the compounds.

No uniform composition Definite composition. Definite ratio/formula

Can be separated by physical means. Cannot be separated by physical means.

Page 5 of 5