Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    JSA - Installation of SPRINKLER - MODIFICATION WORKS AT AL KHALEEJ HOUSE BLDG #9-999 @ABQAIQ.

    Uploaded by

    Altaf Hassain

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    JSA - Installation of SPRINKLER - MODIFICATION WORKS AT AL KHALEEJ HOUSE BLDG #9-999 @ABQAIQ.

    Uploaded by

    Altaf Hassain
    12 views4 pages

    Original Title

    JSA_Installation of SPRINKLER_MODIFICATION WORKS AT AL KHALEEJ HOUSE BLDG #9-999 @ABQAIQ.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    12 views4 pages

    JSA - Installation of SPRINKLER - MODIFICATION WORKS AT AL KHALEEJ HOUSE BLDG #9-999 @ABQAIQ.

    Uploaded by

    Altaf Hassain

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Job Safety Analysis

    JOB SAFETY ANALYSIS RECORD SHEET


    DEPARTMENT: DATE PREPARED: DATE ISSUED:
    PROJECT: MODIFICATION WORKS AT AL KHALEEJ HOUSE 20-Mar-2023
    BLDG #9-999 @ABQAIQ.
    JSA NO.: 005

    DESCRIPTION OF JOB/TASK: Installation of Fire Sprinkler

    PREPARED BY: REVIEWED BY: APPROVED BY:

    Altaf Hassain
    Safety Officer

    REFERENCES:
    Work Permit System GI-2.100
    SA-CSM Hand Tools and Power Tools under Section 11.4 Requirements for Specific Types of Hand Tools
    Lockout and Use of Hold tags process G.I 6.012

    SAFETY EQUIPMENT REQUIRED: Safety Hat, Safety Shoes, Safety Gloves, Safety Glasses, Ear Plugs; pad lock & hold tag; caution/ warning tape
    Note: Adequate and special PPE must also be considered for this task

    JOB
    STEP
    NO. SEQUENCE OF BASIC JOB
    POTENTIAL HAZARDS REQUIRED HAZARD CONTROLS/SAFE WORK PROCEDURES
    STEPS

    Coordinate with authorized Facility user/Proponent Department.


    Activity planning and work Improper planning/coordination Strictly comply with Saudi Aramco’s Work Permit System under G.I
    1 Failure to obtain Required Work Permit 2.100 and CSM II-14 Demolition.
    start-up

    Document: - Job Safety Analysis. Page 1 of 7


    Obtain a required Work Permit from the Area Supervisor before
    starting the job and closing the Work Permit once task is done. See
    SA-G.I. 2.100.
    Get the permit validated for the specific day.
    If required, arrange for the disconnection of all affected service
    lines in accordance with Isolation, Lockout and Use of Hold tags
    process G.I 6.012.

    Installation of Firefighting Slippery Floor. Foreman/ Supervisor/Worker need to inspect the floor before start
    Pipes and sprinkler using Damage Ladder. working on ladder.
    portable Ladder Fall form height. Safety Officer /Supervisor should inspect the ladder weather
    Falling objects. it is in good condition.
    Over loading. Incompetent worker should not work on the ladder.
    Access & egress Worker should not lift any slippery or Heavy Material which has
    potential to fall.
    Worker should not keep any material on the steps of the ladder.

    Installation of sprinkler Sharp edge item A qualified and experienced plumber is needed to optimally install
    Sprinkler glass may damage this network of pipes to fit the sprinklers with high volumes of water
    when the need arises.
    Ensure sprinkler installation according to NEPA 13 AND 14.
    Use necessary ppe while using sharp glass Materials.
    Usage of Hand tools & Incompetent Person Before Starting the worker should be aware of power tools and
    Power Tools wear mandatory PPE.
    Tool Box should be conducted by safety officer before starting the
    activity.
    Damage Power Tools & Hand Tools Safety Officer / Supervisor /Foreman should inspect tools on regular
    basis to avoid any incident. And Damage tools should be removed
    from the site.

    Document: - Job Safety Analysis. Page 2 of 7


    Uninspected Power tools & Hand Tools All hand tools and Power tools should be inspected monthly with
    color coded tag. And inspection should be done certified Electrician
    in presence of Safety Officer

    Closing out of work Trash can shall be provided for garbage, trash and unwanted
    materials. Trash shall remove from waste bin on a daily basis.
    Discarded unnecessary things.
    Poor Housekeeping Keep tidy and clean area daily.
    Use dump truck to transport debris material to Saudi Aramco
    designated dumpsite...
    Activity:
    Date:
    ATTENDANCE SHEET

    I DO HEREBY DECLARE THAT THE JOB SAFETY ANALYSIS WAS EXPLAINED TO ME AND I FULLY UNDERSTAND.

    SN. NAME BADGE NO. POSITION SIGNATURE


    1

    10

    11

    12

    13

    14
    15

    Document: - Job Safety Analysis. Page 6 of 7

    You might also like