TRANSPO
TRANSPO
TRANSPO
The
transportation system in a developed nation consists of a network of modes that have evolved over
many years.
• 1808 Transportation Plan Proposal to the United States by the Secretary of the Treasury Gallatin.
•1887 The Interstate Commerce Commission (ICC) was created and was given additional powers in
1940, but this department got abolished in 1996.
• 1967 Creation of the United States Department of Transportation (DOT).
1. Air Transport -includes all transport through the air by aircraft. Its good for long distance and time
efficient travel
2.Land Transport- transportation that takes place onland. This can be through road, rail, it can be
facilitated by animals such donkey sand camels or use a combination of the wheel with electric or
fuel powered engines to move people and freight quickly and efficiently.
3. Water Transport- is movement by means of a watercraft such as a barge, boat, ship or sailboat
over a body of water, such asa sea, ocean, lake, canal or river.
It is the least expensive and slowest mode of freight transport. It is generally used to transport heavy
products over long distances when speed is not an issue.
Demand for travel can only happen if transportation services connect the desired locations. For
example, if people want to travel between mainland Florida and an island off the coast, the cost of
crossing a bridge will depend on the toll fees and the travel time for cars and trucks.
FORCES THAT CHANGE THE TRANSPORTATION SYSTEM
At any given time, the nation's transportation system is balanced, shown by the amount of traffic
each mode of transportation carries and the service levels provided, including travel time, cost,
frequency, and comfort.
This equilibrium is influenced by market factors like the economy, competition, service costs, and
prices.
-government actions : such as regulation, subsidies, and promotion
-transportation technology: including speed, capacity, range, and reliability.
Government actions also impact transportation balance. For example, when the federal government
built the national interstate system, it shifted the truck–rail balance toward truck transportation. This
development also promoted long-distance travel by car and contributed to the decline of intercity
bus services to small communities.
Technology has also caused big changes in transportation balance. A clear example is the arrival of jet
aircraft, which almost completely replaced passenger train travel in the U.S. and passenger
steamship travel between the U.S. and other countries.
Modes of transportation
The transportation system today is a highly developed, complex network of modes and facilities that
furnishes shippers and travelers with a wide range of choices in terms of services provided. Each
mode offers a unique set of service characteristics in terms of travel time, frequency, comfort,
reliability, convenience, and safety.
-paratransit- flexible and personalized service intended to replace conventional fixed-route, fixed-
schedule mass-transit lines.
Paratransit is available to the public on demand, by subscription, or on a shared-ride basis.
Examples include taxi, car rental, dial-a-ride, and specialized services for elderly, medical, and other
designated users.
A basic attribute of any transit mode is its carrying capacity, defined as the number of vehicles or
persons that pass a given point in a specified time.
Public transportation is an important element of the total transportation services provided within
large and small metropolitan areas.
• Growth of suburbs
• Industry and employment moving from the central city
• Increased suburb-to-suburb commuting
• Migration of the population to the south and west
• Loss of population in “frost-belt” cities
• Growth in private vehicle ownership
• Increased diversity in vehicle types such as SUVs, pickup trucks, and RVs
• High cost per mile to construct fixed-rail transit lines
• High labor costs
HIGHWAY TRANSPORTATION
Highway transportation is the dominant mode in passenger travel and one of the principal freight
modes.
1. Planning (6 to 24 months)
2. Design (15 to 24 months)
3. Environment (9 to 36 months)
4. Right-of-Way (6 to 21 months)
5. Construction (12 to 36 months)
Thus, total project time can range from 4 to 12 years, depending on the physical characteristics,
scope, and community support for the project.
The Wisconsin Department of Transportation follows a six-step process that includes the following
phases.
Step 1. Select Project.
Step 2. Investigate Alternates
Step 3. Obtain Final Approvals.
Step 4. Develop Project Design
Step 5. Prepare for Construction
Step 6. Construct the Project.
•Urban roads serve areas of high-density land development. Urban roads are used primarily for
commuting and shopping trips.
•Rural roads are located outside of cities and serve as links between population centers.
•Arterial roads are intended to serve travel between areas and provide improved mobility.
• Collector roads and minor arterials serve a dual purpose of mobility and access.
•Local roads, supported by state and local funds, serve primarily as access routes and for short trips.
-Truck Transportation
Trucks are manufactured by the major auto companies as well as by specialtycompanies. The
configurations of trucks are diverse.
Trucks are manufactured by the major auto companies as well as by specialty companies. The
configurations of trucks are diverse;
TRANSPORTATION ORGANIZATIONS
Seven Categories of Transportation Organization