PCM INDUSTRY

INDUSTRY PUMPS
AND EQUIPMENT
CATALOGUE

www.pcm.eu
 YOUR PARTNER IN INNOVATION

FLUID HANDLING EXPERTS IN INDUSTRY

PCM offers versatile, robust and easy to maintain technical pumping
solutions, designed to adapt to future needs. We specialise in handling
your difficult products and materials: abrasive, fragile, viscous,
corrosive, explosive, hot or dense.

� LOW LIFE CYCLE COSTS � ECO-DESIGNED PUMPS

Our use of Life Cycle Costs (LLC) analysis to find Today, PCM has unrivalled experience regarding eco-
the most cost-effective pumping solutions for your designed pumps. PCM eco-design approach aims
industrial processes assures you savings in production to reduce the environmental impact of a solution
costs, reduced maintenance downtime, and lower during all the stages of its life cylce, from suppliers
energy consumption. and manufacturing through to decommissioning. In
doing so, we enable you to meet your operational and
� ELASTOMER EXPERT environmental requirements at the same time.

Elastomers are very unique materials that play a

critical role in the operational efficiency of positive
displacement pumps.
To ensure that our pumps always feature the highest
quality and use the most compatible elastomers, we
manufacture our own. Over 80 years of experience
developing, mixing and producing our own elastomers
has given us unparalleled expertise in this domain. We
have an extensive database of elastomer formulas and
fluid compatibilities.

� OUR MARKETS

New energies Mechanics Environment Chemicals Mining & minerals Pulp & paper

1930
René Moineau invents the 2022
Launch of the new 2024
Progressing Cavity Pump (PCP). 2006 2012 PCM develops its offer for
PCM launches the first eco- PCM EcoMoineau™ MX
PCM launches the renewable energies and
1932 designed progressing cavity equipped with an in-place
EcoMoineauTM C stainless steel presents the PCM X-BIO for
René Moineau, in partnership pump, the EcoMoineau™ M maintenance system as
progressing cavity pump biogas units.
with Robert Bienaimé, founded standard
PCM Pompes

1970 2017 2023

PCM invests beyond the PCM strenghtens its Delasco™ New PCM EcoMoineau™ LX
Progressing Cavity Pump peristaltic pump range with the DX pump for lithium battery
and adds Delasco™ and Series and its hopper PCP range with manufacturing
Precipompes™ to its product the EcoMoineau™ MVA.
range.

2 3
 PCM ELASTOMER EXPERTISE

PCM ELASTOMER EXPERTISE A key design characteristic of a Progressing Cavity

Pump is the tolerance between the stator and the
rotor. Stator dimensions and characteristics are
From selection to manufacturing, PCM controls the complete process ensured by strict control of:
• chemicals composition (10 to 20
of elastomer production for progressing cavity pumps. different components),
• casing dimensions,
• manufacturing process variation
(temperatures, injection pressure,
curing…)

NBR
Abrasion
EPDM
resistance
NR / IR Minimum
CR temperature
FKM

Elastomer selection requires specific knowledge and experience that few companies in the world possess. PCM
has gained a vast amount of knowledge and experience over the years and has invested in essential equipment
and resources to continuously improve our ability to select, develop, and produce optimal elastomers uniquely
suited for our customers’ diverse applications. Maximum 5
4
3 Price
temperature
2
1
The hundreds of different fluids PCM customers have to transfer or dose, all bring serious concerns and solutions 0

to find in order for the elastomers used in PCM equipment to guarantee the optimal functional characteristics.
These issues to be considered for an elastomer selection are:
• mechanical resistance to abrasion,
• chemical resistance to the pumped fluid,
• desired color,
• regulations compliance and rules, Acid / alkalin Mechanical
• optimized lifetime, resistance properties
• product integrity (structure, turbidity…),
• resistance to cleaning procedures.
Fat / oil
The main difficulty is for a given application to find the elastomer that will offer the best behavior between chemical resistance
compatibility and fluid abrasivity, taking into account the other factors such as regulations or other constraints
brought by the manufacturing process of our customers.

� CHOOSING THE RIGHT ELASTOMER

� ELASTOMERS TESTING
PCM has developed tens of different elastomers, with different raw materials and different manufacturing recipes,
thus offering a large choice of solutions for almost every application. From laboratory testing equipment to large mixers,
injection presses and vulcanization ovens, PCM has all the
Butadiene Ethylene - Propylene - Fluor rubber necessary equipment and knowledge within its premises
Polyisoprene (IR) Chloroprene (CR)
acrylonitrile (NBR) Diene (EPDM) (FPM/FKM) to assure perfect control of its elastomer selection and
Abrasion Medium abrasion manufacturing.
Greasy substance Medium corrosion High corrosion
Neutral pH Low corrosion
Mineral suspensions, Calcium chloride, Testing & characterization equipment:
Hydrocarbons Starch, other industrial • mechanical tests (static, dynamic,
chalk, clay, calcium disodium phosphate, pig Solvents
Step sludges products
carbonate feed preparation, starch compression, bonding)
• tribology (abrasion, friction)
Corrosion - Corrosion +++ • chemical tests (swelling tests, volume and
Abrasion +++ Abrasion - hardness variation, thermal analysis,
infra-red spectroscopy)

4 5
 TABLE OF CONTENT

TABLE OF CONTENT

� PCM MARKETS & APPLICATIONS 8

• Environment 10
• Mining & minerals 12
• Pulp & paper 14
• New energies 16
• Chemicals 18
• Mechanical engineering 20

� PCM TECHNOLOGIES 22
PCM Moineau™ progressing cavity pumps 24
• PCM EcoMoineau™ MX 26
• PCM EcoMoineau™ C 32
• PCM EcoMoineau™ MF / CF, floating stator pumps 36
• PCM EcoMoineau™ LX 40
• PCM EcoMoineau™ MSH / MVA-FF / X-BIO 44

PCM Delasco™ peristaltic pumps 52

• PCM DX / Z / PMA Series 54

PCM Lagoa dosing pumps 60

• PCM Lagoa 62

PCM grinders 66
• PCM X-Guard 68
• PCM Macerator 70

� PCM SERVICES 72

6 7
 PCM MARKETS & APPLICATIONS

PCM MARKETS & APPLICATIONS � PULP AND PAPER

The choice of smooth productivity
� CHEMICALS
The choice of compatibility
PCM serves six highly demanding industrial markets. While all of them The paper industry is one of the most demanding Product compatibility and versatility are what the
share similar requirements in terms of reliability, cost effectiveness sectors in terms of productivity, water treatment and chemical industry looks for in pumps. Manufacturers
dosing. Most production facilities operate non-stop, of special chemicals require pumps capable of
and productivity, each has special needs that PCM meets with perfectly and any downtime can be costly. In addition, pulp and handling fluids with fragile composition and complex
adapted pumping systems. paper plants use incredible quantities of water, which rheology.
they must manage and treat in accordance with strict
regulations.

� ENVIRONMENT � MINING AND MINERALS � NEW ENERGIES � MECHANICAL ENGINEERING

The choice of competitiveness The choice of robustness The choice of sustainability The choice of versatility

One of the most important challenges in environmental Abrasiveness is the number one challenge in the To meet their promises of sustainability, new energies Light and heavy industries require versatile pump
protection is the cost-effective treatment and handling mineral industry. Downtime caused by equipment must combine environmental responsibility with systems that can be easily integrated into their
of municipal and industrial waste water. PCM pumps failure can bring an entire mine or production real-word economics. To reach economically viable production chains, whether upstream during
are used to handle industrial and municipal waste facility to a halt. Consequently, robustness, ease of production levels, their industrial processes require manufacturing or downstream during waste
water and sewage, dewatered sludge and to meter maintenance and spare part delivery times are of the pump systems capable of handling a wide range of processing. Pumps need to be reliable, robust and
chemical additives. utmost importance. fluids and solids accurately and reliably. capable of handling a wide range of emulsions, metal
particles and corrosive materials.

8 9
 ENVIRONMENT

� SOME CHALLENGES TAKEN BY PCM

Challenge: Challenge:
A major French company that collects and treats A major manufacturer of sodium carbonates and
industrial and residential waste water uses lobe pumps bicarbonates must review its waste rock disposal facility
to feed filter presses for sludge dewatering. The client following the extension of its salt extraction zone. The
complained about the low level of dryness of the final new discharge zone is now more than 6 km away from
waste product. the storage tanks and requires a pumping system
capable of controlling more than 290 psi of pressure
due to pressure drop in the pipes and the viscosity of the
PCM solution:
sludge discharged.
PCM progressing cavity pumps have a much higher
capacity for flowrate control and for pressure delivery
than what can be provided by lobe pumps. For this PCM Solution:
reason, replacing them with 50MX18S or 13MX24S PCM PCM offers a 5-stage Moineau™ pump, capable of
progressive cavity pumps with 3 or 4 stages, the client delivering a flow rate of 352 gpm at a pressure of 435
was able to quickly see the drop in the water content of psi equipped with a cast iron body, a 316L stainless
the final product at the outlet of the filter press as well steel rotor with a 100µm chrome coating, a synthetic
as the decrease of the time needed to feed them. polyisoprene stator resistant to high abrasiveness and
a double mechanical seal lubricated with glycol in order
to withstand strong possible heating. This pump runs
24 hours a day, 7 days a week, and cannot afford long
period of downtime. The customer also has an identical
emergency pump and all first emergency spare parts
necessary for the rapid restoration of its pump.

� PCM OFFER FOR ENVIRONMENTAL APPLICATIONS

PCM EcoMoineau™ C
ENVIRONMENT

PCM Delasco™ PMA

PCM EcoMoineau™

PCM EcoMoineau™

PCM EcoMoineau™

PCM Delasco™ DX

PCM Delasco™ Z
MF / CF, floating

MSH / MVA-FF

PCM Grinders
stator pumps

PCM Lagoa
Clear choice for treating liquid waste

MX
Pumping systems play a crucial role in the environmental industry, ensuring that industrial and
municipal wastewater is handled economically and reliably. Municipal waste water treatment

Industrial waste water treatment

PCM pumping equipment is available for a wide range of key applications in the treatment of wastewater.
PCM pumps are designed to offer the robust performance required for transferring wastewater, Flocculant/concentrated polymer dosing
dewatered sludge, and metering chemicals such as lime slurry, ferric chloride or polymer in traditional
wastewater treatment plants. All steps of water treatment processes are efficiently supported by PCM Flocculant/diluted polymer dosing
equipment, from pre-treatment to final sludge evacuation.
Chemical dosing

We also provide solutions for other water treatment applications, such as flue gas clean-up, landfill
Filter-press feeding
leachate, recovering hydrocarbon and performing ground remediation.

10 11
 MINING AND MINERALS

� SOME CHALLENGES TAKEN BY PCM

Challenge: Challenge:
A French quarry producing gravel, rolled and crushed One of the world's largest producers of lime and gypsum
from a silico-limestone deposit uses a progressing stones has to transfer lime slurries from a thickener to
cavity pump to ensure the transfer of its mineral sludge a heat exchanger at a regulated flow rate of 110 gpm, at
at the outlet of its settling tank. This quarry finds that it a pressure of 116 psi. The transferred sludge can contain
must replace too often the wearing parts of this pump up to 20% solids with possible 40mm particles. This
(stator, seals and sheaths) and is asking PCM to find a quarry is accustomed to using centrifugal pumps, but
more economically viable solution. the operating point of the pump used for the transfer
in question proves to deliver too higher flowrate for the
PCM solution: heat exchanger and requires a motorization of very high
PCM selects a 120MX12S progressing cavity pump power (174 hp), extremely energy-consuming and noisy.
equipped with a synthetic polyisoprene (IR) stator and
a rotor coated with a 400µm thick chromium plating, PCM solution:
which guarantees optimum abrasion resistance. We The extended operating range of the progressing cavity
accompany this selection with the possibility for this pumps allows PCM to recommend a 120M12S pump with
new customer to test it and thus commit to the purchase a motor of only 24.8 hp instead of the centrifugal pump
of this pump only after a probationary period allowing used. The PCM pump consumes 7 times less energy than
him to measure concretely the gains that this new pump the centrifugal pump, requires much less maintenance,
will provide it throughout its extended lifespan. Three allows greater regulation of the flow obtained and in
months after the first pump lapse in his quarry, and particular allowed the quarry to get rid of its installation
anticipating an annual gain of some € 5,000, thanks to that was controlling the overflow of its centrifugal pump
the spacing of the maintenance periods, the customer (removal of several tens of meters of piping and a tank
acquired the PCM pump. of high capacity). The customer also appreciates the
significant noise reduction of his new pump...

�PCM OFFER FOR MINING APPLICATIONS

MINING AND MINERALS

PCM EcoMoineau™ C

PCM Delasco™ PMA

PCM EcoMoineau™

PCM EcoMoineau™

PCM EcoMoineau™

PCM Delasco™ DX
Bringing flawless solutions to tough environments

PCM Delasco™ Z
MF / CF, floating

MSH / MVA-FF

PCM Grinders
stator pumps

PCM Lagoa
The harsh working environments and tough pumping conditions typical of quarrying, mining, ceramic or

MX
construction can quickly generate unscheduled downtimes and costly repairs.
Flocculant dosing
Centrifugal pumps with inevitable high speeds are detrimental to fragile polymers, demand enormous
horsepower as well as costly external flush plans and fail rapidly when moving the abrasive fluids Filter-press feeding
traditionally found in mining processes. PCM pumps guarantee a constant flow regardless of back
pressure, viscosity or solids content variations. Therefore they are very efficient in supporting processes Chemicals dosing
where transfer and dosing are crucial, from precious metal recovery to tailings treatment, including
explosive preparations. Mortar grout transfer

Sludge dewatering
PCM range of positive displacement pumps offers the best-suited technologies to meet your demand
for constant productivity while keeping costs under control. Explosive products dosing

12 13
 PULP AND PAPER

� SOME CHALLENGES TAKEN BY PCM

Challenge: Challenge:
A paper mill specialized in the manufacturing of high- One of Europe's largest thermal paper coating sites
end cigarette papers is developing a very airy paper uses more than 150 pumps of various technologies. This
pulp that is difficult to transfer by traditional centrifugal company has problems with the reliability and lifespan of
pump techniques. This plant is looking for pumps its eccentric disc pumps when pumping kaolin, a highly
capable of transferring such a paste whose texture and abrasive product. Forced to replace the stainless steel
rheology evolve throughout the various stages of its discs of these pumps every 2 months, they are looking
manufacturing process, at a minimum flow rate of 396 for a more competitive alternative solution and subject
gpm. In addition, this paste does not tolerate any trace to less maintenance operations.
of ferric ions and cannot be brought into contact with
conventional materials. PCM solution:
PCM offers the EcoMoineau™ C stainless steel pumps
PCM solution: to best withstand the corrosiveness of pumped
PCM EcoMoineau™ C high capacity pumps have all the products. The selection consists of the combination
qualities required by this paper mill. The extreme aeration of polychloroprene (CR) stators, offering a very good
of their pastes does not represent an obstacle to their resistance to abrasive products while guaranteeing
pumping and their stainless steel configuration makes good resistance to chemical attack, and stainless steel
them fully compatible with the implementation process. rotors coated with a 400µm chromium layer to improve
A pilot unit is put in place, proving that the selected the hardness. Some pumps, those most stressed in
equipment is fully compliant with the specifications and abrasion, are configured with ceramic rotors. Mechanical
makes possible an upcoming industrial installation. seals are back-to-back cartridge design. These pumps
are now systematically installed by this customer when
he has to pump and dose highly abrasive and corrosive
products.

� PCM OFFER FOR PAPER APPLICATIONS

PULP AND PAPER

PCM EcoMoineau™ C

PCM Delasco™ PMA

PCM EcoMoineau™

PCM EcoMoineau™

PCM EcoMoineau™

PCM Delasco™ DX

PCM Delasco™ Z
Delivering business-critical strength

MF / CF, floating

MSH / MVA-FF

PCM Grinders
stator pumps

PCM Lagoa
No industry is as demanding as paper and pulp manufacturing when it comes to reliability and cost

MX
efficiency.
Pulp preparation
PCM volumetric pumps, with their very high level of reliability and efficiency, are the best-in-class
solutions to cope with stock and starch preparation, paper coating and sludge treatment. All these Coating preparation
processes require equipment that resists to both very abrasive products and corrosive ones, and that
may require high suction capabilities, gentle handling and chemical compatibility. Glue and pigmentation preparation

Chemicals dosing
When you need a single source to reduce the Life Cycle Cost of your pumping equipment, PCM is the
partner of choice, from components to pumps, including services and expertise. Waste water treatment

Starch transfer

14 15
 NEW ENERGIES

� SOME CHALLENGES TAKEN BY PCM

Challenge: Challenge:
A dry methanisation unit wishes to manage the recirculation In order to protect its circulation pumps supplying a
of its digestates in its digester as well as the return to a leachate dispersion unit, taken from the digester bottoms
post-digester after dilution with water in order to allow the and sprinkled on the surface of the organic substrate, a
recovery of additional gas and thus increase the overall methane producer wishes to have a grinder that will reduce
profitability of the installation. This unit also wants to feed a the solid waste like branches or rags to small particles.
phase separator to manufacture liquid and solid spreading
products.
PCM solution:
The PCM X-Guard grinder, which is booth good in grinding
PCM solution: and easy to install and maintain, allows the reduction of
PCM, in connection with the consulting firm specializing solids in particles not exceeding 5 to 6 mm, and thus can be
in the design of anaerobic digestion plants, proposes the easily pumped and if necessary discarded by conventional
use of a single 120MX12S Moineau™ pump equipped with load collectors.
a frequency converter to ensure the 3 desired functions
(recirculation of the digestate / transfer to post-digester
/ send to phase separator), by associating this pump with
a set of valves and instrumentations controlled by the
integrated supervision system of the whole installation.

� PCM OFFER FOR NEW ENERGY APPLICATIONS

PCM EcoMoineau™ C

PCM Delasco™ PMA

PCM EcoMoineau™

PCM EcoMoineau™

PCM EcoMoineau™

PCM Delasco™ DX

PCM Delasco™ Z
MF / CF, floating

MSH / MVA-FF

PCM Grinders
stator pumps

PCM Lagoa
NEW ENERGIES

MX
The choice of sustainability Manure transfer

Biomass digester feeding

To meet their promises of sustainability, the new energies market must combine environmental Biomass circulation
responsibility with real-word economics. Industrial processes require pump systems capable of handling
a wide range of fluids and solids accurately and reliably, while keeping costs under control. Chemicals dosing

PCM volumetric pumps, with their wide range of materials and options, perfectly meet these Polymers dosing
miscellaneous demanding processes. Because they can transfer products without shear and offer
resistance to the aggressive chemical and mechanical constraints and have the capability to pump
fluids with large solid contents, they are very efficient solutions for biomass treatment, biofuel
preparation, flue gas desulfurization or coal water mixtures.

16 17
 CHEMICALS

� SOME CHALLENGES TAKEN BY PCM

Challenge: Challenge:
One of the world leaders in the manufacture of synthetic A chemical production center in the East of France has
gemstones has to transfer Alum powder, a highly just acquired 3 lobe pumps but after only a few days of
abrasive product, and initially opts for a peristaltic pump. commissioning, the managers of this center realize that
After a few weeks of use, he cannot tolerate the need to these pumps are not working properly; they do not provide
replace the tube of this pump every 2 days, not benefiting the theoretically promised flowrate at the required service
pressure. The chemical formulation unit must start within
from his supplier of a sufficiently resistant material.
2 weeks and engineers are working on finding a solution.

PCM solution: PCM solution:

An engineering firm advises this company to contact PCM offers small EcoMoineau™ C metering pumps
PCM. After the analysis of the situation, we recommend (05C12S), which are available, including engines, under
to change the pump technology, knowing that the extremely short lead times. These pumps perfectly meet the
mechanical constraints of the atomization process of this desired requirements, especially in terms of guaranteeing
manufacturer of crystals would not be compatible with the delivered flow rate which must remain constant even
the use of peristaltic pumps. A 3C24S PCM progressing when the pressure and the viscosity of the product vary over
cavity pump with a synthetic polyisoprene (IR) stator has a clearly identified range. The pumps in question have been
been installed and 6 months after it was started, only 2 delivered in 15 days and the formulation unit can start on
maintenance operations were necessary. time...

� PCM CHEMICAL APPLICATIONS

PCM EcoMoineau™ C

PCM Delasco™ PMA

PCM EcoMoineau™

PCM EcoMoineau™

PCM EcoMoineau™

PCM Delasco™ DX

PCM Delasco™ Z
MF / CF, floating

MSH / MVA-FF

PCM Grinders
stator pumps

PCM Lagoa
CHEMICALS

MX
Compatibility and versatility
Polymers production

Acids dosing
Product compatibility and versatility are what the chemical industry looks for in pumping solutions.
Manufacturers of chemicals require pumps capable of handling fluids with fragile composition and Reagents / additives treatment
complex rheology.
Phytosanitary products handling
PCM offers pumping and metering solutions for the chemical industries where safety is the primary
Foam production
concern. Users are not only looking for an efficient and cost effective equipment, they also need to be
convinced that in case of failure any potential leakage will be contained and that the pump will be easy Glue dosing
to operate and maintain.
Effluent treatment
There is no industry more diversified than the chemicals industry, where aggressive acids, highly
flammable or explosive products, require material compatibility and thermal control. PCM equipment
is designed to perfectly meet these high-level requirements.

18 19
 MECHANICAL ENGINEERING

� SOME CHALLENGES TAKEN BY PCM

Challenge: Challenge:
A manufacturer of composite materials for the A manufacturer of mixing and stirring equipment offers
automotive and aerospace industries is developing a its clients turnkey skids including agitator tanks, mixers,
revolutionary material that allows for the most flexible control panels and pumps for filling and emptying these
shaping, soundproofing and thermal insulation, at a skids.Their specialty is the mixing of complex, often
production cost never equaled. One of the raw materials highly viscous products, and the required pumps must
used for the production of this material is a very low be capable of transferring and dosing fluids under high
density powder, of the microsphere type, the dosage pressure stresses while offering the lowest possible
of which does not tolerate any incorporation of air. The dimensional characteristics for easy integration into
diaphragm pumps traditionally used by this company are mixing skids.
reaching their limits and can not ensure a sufficiently
precise mass distribution. PCM solution:
PCM provides pumps combining the two qualities
PCM solution: required by this customer thanks to its progressing
PCM Delasco™ Peristaltic Pumps meet all the cavity pumps with floating stator (MF). In particular the
requirements of this company. They slightly compress 4M12F pump allows pumping at a flow rate of more than
the powders during their pumping, giving them a flow 8,8 gpm at a pressure of 116 psi, and does not exceed an
property close to a very low viscosity liquid without overall length of 25.2’’ when equipped with a motor of 1
altering the primary characteristics. The desired HP.
industrial flow rate of 11 gpm at a pressure of less than
44 psi directs the choice to a PCM Delasco™ Z series
peristaltic pump.

� PCM OFFER FOR MECHANICAL APPLICATIONS

PCM EcoMoineau™ C

PCM Delasco™ PMA

MECHANICAL ENGINEERING

PCM EcoMoineau™

PCM EcoMoineau™

PCM EcoMoineau™

PCM Delasco™ DX

PCM Delasco™ Z
MF / CF, floating

MSH / MVA-FF

PCM Grinders
stator pumps

PCM Lagoa
Solid polyvalency

MX
Light and heavy mechanical industries require versatile pump systems that can be easily integrated into
Waste oil treatment
their production chains, whether upstream for manufacturing or downstream for waste processing.
Pumps need to be reliable, robust and capable of handling a wide range of emulsions, metal particles Paint / varnishes / cataphoresis treatment
and corrosive materials.
Polymers transfer
Surface treatments, painting and pre-treatment applications, as well as waste processing are
applications requiring a high level of modularity of the design of the pumps. PCM offers solutions that Chemicals dosing

perfectly match these expectations and that resist to aggressive media and are easy to clean. All key
Galvanizing baths handling
benefits needed by this industry.
Degreasing / pickling baths handling

Engine coolant treatment

Oil transfer

20 21
 PCM TECHNOLOGIES

PCM TECHNOLOGIES
PCM provides a wide range of positive displacement pumps, designed
to meet your needs whatever industry you are working in.

� PROGRESSING CAVITY PUMPS: � PERISTALTIC PUMPS: � DIAPHRAGM PUMPS: � PCM GRINDERS &
PCM MOINEAU™ PCM DELASCO™ PCM LAGOA MACERATORS
From the name of the inventor and The ideal choice to reduce Accuracy and reliability: ingredients The cost effective way to protect your
PCM co-founder: René Moineau maintenance costs of a successful dosing downstream equipment

PCM progressing cavity pumps are those Our pumps use the peristaltic principle, Ideally suited to applications which require PCM offers technologies that are well suited to
originally designed by René Moineau to ensure whereby the deformation and compression of accurate dosing (chemical engineering, different types of wastes to be grinded and offers
the transfer of very viscous and fragile fluids a soft elastomer hose allows fluid to be passed environmental applications), our diaphragm a macerator for fibrous string-type materials
under extreme conditions of flowrate and through the system. They are robust and easy dosing pumps also offer smooth pumping wih a and a grinder for solid wood, plastic or pebble
pressure. Our pumps offer very low shear to maintain, meaning they can be used in a very low shear action. material.
operations and are pulsation free. They are very wide range of industrial applications. They are
versatile and are especially suited to processes particularly suited to abrasive or corrosive fluids.
where regularity and accuracy are requested.

Range of PCM Lagoa diaphragm dosing pumps Range of PCM grinders

• PCM Lagoa • PCM X-Guard
Range of PCM Moineau™ progressing cavity Range of PCM Delasco™ peristaltic pumps
• PCM Macerator
pumps
• PCM DX Series
• PCM EcoMoineau™ MX • PCM Z Series
• PCM EcoMoineau™ C • PCM PMA Series
• PCM EcoMoineau™ with floating stator
• PCM EcoMoineau™ MVA-FF
• PCM EcoMoineau™ MSH
• PCM EcoMoineau™ LX

22 23
 PCM MOINEAU™ TECHNOLOGY

PCM MOINEAU™ PROGRESSING CAVITY

PUMPS
From the name of the inventor and PCM co-founder: René Moineau

� PRINCIPLE OF MOINEAU™ TECHNOLOGY

A Moineau™ pump consists of a helical rotor turning into a helical stator. When the rotor turns inside the stator,
the honeycomb progresses spirally along the axis of the pump without changing either shape or volume. This
action transfers the product from the pump suction to the pump discharge without degrading the product.
This basic principle of Moineau™ pumps allows a high accuracy of flow and pressure, making these pumps
extremely efficient for transferring and dosing the most complex fluids.

PCM Moineau™ pumps are configurable to perfectly fit to the multiple applications proposed by their users. From
the choice of the elastomers of their stator, to the coating of their rotor, through the choice of the types of dynamic
seals of their drive, but also many other options, each PCM Moineau™ pump is modular and thus meets all
constraints.

� BENEFITS
• Preserves the texture of fragile fluids (no shearing compared with lobe or centrifugal technologies)
• Handles fluids with solids
• High suction capability
• Self-priming
• Constant non-pulsating flow
• Reversible

� RANGE OF PCM PROGRESSING CAVITY PUMPS

• PCM EcoMoineau™ MX
• PCM EcoMoineau™ C
• PCM EcoMoineau™ MF / CF, floating stator pumps
• PCM EcoMoineau™ MVA-FF
• PCM EcoMoineau™ MSH
• PCM EcoMoineau™ LX
• PCM X-Bio

24 25
PCM ECOMOINEAU™ MX
The progressive cavity pump equipped with a maintenance in place
system as standard.
The PCM EcoMoineau™ MX pump is specially designed In addition to its in-place maintenance system, this
to offer easy and fast maintenance with its integrated pump stands out with unmatched performance. It
in-place maintenance system as standard. combines the advantages of eccentric screw pump
Maintenance operations can be carried out on-site technology with the characteristics of progressive
without removing the pump from its installation, reducing cavity pumps, providing optimal efficiency and
downtime and optimizing industrial productivity. proven reliability in various industrial applications.

Its clever modular design provides easy access to In summary, the PCM EcoMoineau™ MX pump is the
internal components, reducing maintenance costs ideal choice for industries seeking a high-performance,
while ensuring long-term optimal performance. The robust, and user-friendly pumping solution. With its
PCM EcoMoineau™ MX pump is more compact than standard-equipped in-place maintenance system, it
similar progressive cavity pumps, requiring less space enables productivity optimization.
for maintenance (just 7 cm is sufficient for larger
models).
� TECHNICAL PERFORMANCES
� EXAMPLES OF APPLICATIONS FLOWRATE

250 m3/h
[1101 gpm]
• Sludge drainage (environment)
• Filter-press feeding (mines and quarries) 200 m3/h
[881 gpm]

• Starch transfer (paper)

150 m3/h
• Biomass circulation (new energies) [660 gpm]

• Polymer production (chemistry)

100 m3/h
• Used oil treatment (mechanics) [440 gpm]

50 m3/h
[220 gpm]

0 6 bar 612bar
bar 18 bar 24 bar
12 bar
[87 psi] [174 psi] [261 psi] PRESSURE
[87 psi] [174[348
psi]psi]
 PCM ECOMOINEAU™ MX

� PUMP CONSTRUCTION INVENTIVE FLANGE

MULTI-STANDARD

� JOINT ASSEMBLY
HIGH PERFORMANCE
BENEFITS
AND QUALITY • Cost and stock savings: same
ELASTOMERS joint assembly for all models
DEVELOPED IN OUR from the same module
STATE-OF-THE-ART
LABORATORY • Maintenance time saving: 3
screws only to dismantle the
joint. No sheath dismantling,
nor usage of grease or oil.

• Patented connecting system

• Durable and robust design:

lifespan increase for non
corrosive and non abrasive
applications

PATENTED CONNECTING
SYSTEM
REVOLUTIONARY
Pump joint > 90m3/h
JOINT

MIP RING WIDE HAND HOLES

(MAINTENANCE IN PLACE)

� PCM ECOMOINEAUTM MX RANGE BENEFITS Pump joint < 90m3/h

SPACE SAVING VERSATILE CONSTRUCTION

• Revolutionary joint 80 % shorter than other PCPc on the market Integrated construction
• Revolutionary joint coupling rod length reduced and hardened for long life operation • Shortest design
• Patented connecting system: only 7 cm of clearance required to dismantle the stator of the biggest models • Fewer parts, no drive shaft
• Replaceable in place of the PCM EcoMoineau™ M (see next page): The floor mounting system and the • Self-positioning mechanical seal
center distance between the two flanges are the same which allows easy replacement • Standard mechanical seals eliminate leaking, tightening and adjustment
• Reduced mechanical seal diameter lowers spare parts costs
EASY AND QUICK MAINTENANCE • Ideal for non sticky and low abrasive fluids
• Patented connecting system with 3 screws only
• Wide hand holes to ease pump body access, declogging, cleaning and pump operation observing Monobloc and bearing construction
• It is possible to unscrew the rotor from the stator using a wrench thanks to the added of a flat on the head • Reduced dimensions
of the rotor. • Built-in drip tray
• Reduced maintenance time and therefore cost savings • Versatile configurations (seals and stators)
• Sealing maintenance by just removing the drive from the back • Spacer with improved access to the sealing system
• Maintenance in place system in standard on all pump (see next page) • Rubber deflector (protects the drive and bearing therefore reducing maintenance)

ECO-DESIGN PUMP Hopper option

• Recovery and transfer of thickened sludges (up to 120 g/l) from dripping table
• Less power consumption compared to most Progressing Cavity Pumps on the market
• Less raw materials

28 29
 PCM ECOMOINEAU™ MX

� MAINTENANCE IN PLACE SYSTEM

The new maintenance system in place as standard on the entire PCM Ecomoineau™ MX range allows the stator
and/or rotor to be replaced in just 5 steps and without having to remove the pump from its installation.
Maintenance time is considerably reduced, which in turn reduces downtime and life-cycle costs.

STEP 1 : PERFORMANCE CONTROL:

Unscrew the two screws on the MIP ring to remove it. Then
unscrew the tie rods on the suction pipe and remove the top two. The PCM hydraulics (stator with armature) are
unchanged, which gives us better control of leakage
rates than a solution with two half-shells or with an
unglued elastomer stator. Whatever the pressure, the
pump's performance is unchanged.
STEP 2 :
Unscrew the suction flange.
Shift it towards the pipe to hold and support it.

SIMPLIFIED INSTALLATION :
The centre-to-centre distance between the suction
STEP 3 : flange and discharge flange is the same as that of the
Remove the inspection hatches from the body. Then unscrew the PCM Ecomoineau™ M which allows it to be replaced
3 screws on the shaft line to release the rotor head. in place, thus reducing installation costs in the event
of a pump replacement.

STEP 4 :
The rotor/stator assembly is now free. The space left by the MIP
ring makes it easy to remove them.

ADAPTABILITY TO THE PROCESS :

Accessories can be added to the MIP ring using the
STEP 5 : stitch provided.
The rotor head has two flats. These allow the rotor to be removed
from the stator using a simple spanner.

UPGRADE :
Your PCM Ecomoineau™ M can be upgraded to PCM
Ecomoineau™ MX using an adaptation kit..

Then simply repeat these steps in reverse to reassemble the pump.

Maintenance is now completed!!!

30 31
 PCM ECOMOINEAUTM C
The most corrosion resistant Progressing Cavity Pump in the market

Its revolutionary design combines the legendary progressing cavity pump on the market. The energy
performance and reliability of PCM Progressing Cavity used to manufacture, transport and operate the PCM
Pumps technology with a highly modular, eco-friendly EcoMoineau™ C pump is therefore optimised.
design. The PCM EcoMoineau™ C pump requires
less space for installation which reduces costs and
This PCP is made with fewer parts compared to
facilitates its integration.
competitors models. This new stainless steel pump has
a multitude of design features that make installation,
The PCM EcoMoineau™ C pump is lighter (less raw operation and servicing easier than ever before.
materials) and uses 10% less power than most

� EXAMPLES OF APPLICATIONS � TECHNICAL PERFORMANCES

• Dosing of flocculants (environment) FLOWRATE
• Metering of explosive products (mines and
250 m3/h
quarries) [1101 gpm]

• Preparation of coatings (paper)

200 m3/h
• Dosing of chemicals (new energies) [881 gpm]

• Metering of acids (chemistry)

150 m3/h
• Galvanizing baths (mechanics) [660 gpm]

100 m3/h
[440 gpm]

50 m3/h
[220 gpm]

0 6 bar 612bar
bar 18 bar 24 bar
12 bar
[87 psi] [174 psi] [261 psi] PRESSURE
[87 psi] [174[348
psi]psi]

32 33
 PCM ECOMOINEAU™ C

� PUMP CONSTRUCTION

INVENTIVE FLANGE
MULTI-STANDARD � JOINT ASSEMBLY
HIGH PERFORMANCE
BENEFITS
AND QUALITY • Cost and stock savings: same
ELASTOMERS joint assembly for all models
DEVELOPED IN OUR from the same module
STATE-OF-THE-ART
LABORATORY • Maintenance time saving: 3
screws only to dismantle the
joint. No sheath dismantling,
nor usage of grease or oil.

• Patented connecting system

• Durable and robust design:

lifespan increase for non
corrosive and non abrasive
PATENTED applications
CONNECTING
SYSTEM

Pump joint > 90m3/h

REVOLUTIONARY
JOINT

Pump joint < 90m3/h

� PCM ECOMOINEAUTM C RANGE BENEFITS

SPACE SAVING VERSATILE CONSTRUCTION

• Revolutionary joint 80 % shorter than other PCPs on the market. Integrated construction
• Revolutionary joint coupling rod length reduced and hardened for long life operation • Cost-effective solution including single bellow mechanical seal (self-positioning)
• Patented connecting system: only 10 cm of clearance required to dismantle the stator of the biggest • Shortest and lightest design
models.
Monobloc and bearing construction
• Five sealing solutions available
EASY AND QUICK DISMANTLING • Spacer with improved access to the sealing system
• The seal can be changed by simply disconnecting the drive • Rubber deflector: protecting the drive and bearing
• The shaft line (rotor, coupling rod, driving shaft) can be removed without disconnecting pipework
• Patented connecting system with 3 screws only

ECO-DESIGN PUMP
• 10% less power consumption compared to most Progressing Cavity Pump's on the market
• Less raw materials

34 35
 PCM ECOMOINEAUTM MF / CF
floating stator pumps
The most compact Progressing Cavity Pump in the market

Based on the Moineau™ PCP technology, the PCM drive. The pump body is consequently shorter.
EcoMoineau™ Progressing Cavity Pump with floating In many cases, this PCP with floating stator equipped
stator is ideal for small space requirements. Using with a frequency inverter can be used as a dosing pump.
a floating stator without frame, this small PCP does It is an advantageous replacement for traditional
not require connecting rod as used by conventional dosing units for viscous, loaded and abrasive
Progressing Cavity Pumps. products. Its compactness and robustness makes it
particularly suitable for integration in machines and
The flexibility of the stator allows the rotor to rotate systems.
eccentrically, as the rotor is directly connected to the

� EXAMPLES OF APPLICATIONS � TECHNICAL PERFORMANCES

• Metering of chemicals (environment)
FLOWRATE
• Dosing of flocculants (mines and quarries)
• Preparation of glue and pigmentations 7 m3/h
[31 gpm]
(paper) 6 m3/h
• Dosing of polymers (new energies) [26 gpm]

5 m3/h
• Handling of phytosanitary products [22 gpm]

(chemistry) 4 m3/h
[18 gpm]
• Treatment of paints, varnishes, cataphoresis 3 m3/h
(mechanics) [13 gpm]

2 m3/h
[9 gpm]

1 m3/h
[4 gpm]

0 6 4barbar 8 bar
12 bar
PRESSURE
[87[58psi]
psi] [174[116
psi]psi]

36 37
 PCM ECOMOINEAU™ MF / CF

� PUMP CONSTRUCTION � PCM ECOMOINEAUTM MF / CF, FLOATING STATOR PUMPS RANGE BENEFITS
TERMINAL BOX
(option)
SPACE SAVING
• Compact size thanks to the rotor which is directly connected to the drive
• Easy integration to existing installation
BODY
QUICK AND SIMPLIFIED MAINTENANCE
• Shorter body
FREE STATOR • Reduced weight
• No connection rod

VERSATILITY
• Simple and rugged construction in stainless steel or cast iron (depending of the pumped fluid)
• Dosing pump without pulsations
• Handles fragile and viscous products

LOW LIFE CYCLE COSTS (LCC)

• Simple design
DRIVE • Cost-efficient maintenance
• Reduced weight

SHAFT SEALING

ELASTOMER
COUPLING � STAINLESS STEEL CONFIGURATION
ROTOR
• 7 models specially designed for highly
corrosive applications
• Body / rotor / connections in ANSI 316L
• Several types of connections aviable in
standard (SMS, DIN, MACON, CLAMP, IDF, RJT,
ISO, ANSI)
• Same characteristics and hydraulic
performances as the cast-iron versions
� PCM ECOMOINEAUTM MF / CF, FLOATING STATOR PUMPS OPTIONS
& ACCESSORIES
AVAILABLE ACCESSORIES
• Pressure sensor: improves control of your process (manometer, pressure switch, pressure
transmitter, combined pressure sensor)
• Dry running protection: the free stator principle is more tolerant to dry running. For complete
protection, the dry running system controls product movement and protects the pump against
stoppages or dry running, which may damage the stator.

OPTIONS
• Trolley which allows a mobile and versatile use of pump (easy fixing, stability, ergonomics)
• By pass and/or safety valve avoids the risk of pump damage in the event of overpressure and controls
flow rate
• Automatism to control level, flow rate and pressure

38 39
 PCM ECOMOINEAU™ LX
The pump for the lithium battery manufacturing process
Its revolutionary design combines the than most progressing cavity pumps on the
legendary performance and reliability of market. The energy used to manufacture,
PCM Progressing Cavity Pump technology transport and operate the EcoMoineau™
with a highly modular, eco-friendly design. LX pump is therefore optimized. This PCP
The EcoMoineau™ LX pump requires less is made with fewer parts compared to
space for installation which reduces costs competitors models. This new stainless-
and makes it easy to integrate into your steel pump has many design features that
system (or process). The EcoMoineau™ LX makes installation, operation and servicing
pump is shorter and uses 10% less power easier than ever before.

� EXEMPLES D'APPLICATIONS � TECHNICAL PERFORMANCES

• Lithium battery paste
DÉBIT

7 m3/h

6 m3/h

5 m3/h

4 m3/h

3 m3/h

2 m3/h

1 m3/h

0 6 4bar
bar 8 bar
12 bar PRESSION
[87 psi] [174 psi]

40 41
 PCM ECOMOINEAU™ LX

PCM ECOMOINEAU™ LX
Pump construction
Duraflex flexible shaft :
• Titanium : high quality and reliability
• 3 years warranty
• Small footprint due to flexible shaft

Designed in one piece, it has no possible retention zones, which limits material loss.
The total absence of wear parts prevents any risk of metal particles being dropped
into the product. No sheaths, grease, or oil in the pump, and therefore no risk of
contaminating the product

Stator EPDM Rotor inox duplex 329LN

PCM EPDM 185 is perfectly adapted Moineau™ technology respects texture
to the chemical characteristics of the and properties of your product. (see the
pumped products and fully meets the ‘Moineau™ technology principle» page)
requirements of these applications
Gearmotor or Servomotor Brushless
depending on the application
Servomotor allows to increase the
precision of the coating

Available Packing gland or mecanical seal

connections : available depending on the application

• SMS Stainless steel 316L body :

• CLAMP • The shape of the body improves
• DIN 11851 the efficiency of the pump
• ISO flanges

ECO-DESIGN PUMP EASY AND QUICK DISMANTLING

• 10% less power consumption compared to most Progressing Cavity • The seal can be changed by simply disconnecting the drive
Pump’s on the market • Removal of the shaft line (rotor, connecting rod, drive shaft) without
• Less raw materials dismantling the piping

42 43
 PROGRESSING CAVITY PUMPS
WITH FEEDING HOPPER
Progressing Cavity Pumps with feeding hopper and archimede screw
Based upon the Moineau™ technology, the PCM High viscosity, pasty, sticky, high dry matters content,
EcoMoineau™ Progressing Cavity Pumps are designed non-flowing fluids with big chunks or that have a
to bring simplicity for transferring and/ or dosing the tendency to bridge are found across many industries
many complex fluids found in a wide range of industrial and often entail challenging conditions.
applications.

With a simple rugged design, PCM EcoMoineau™

Series allow you to combine constant productivity and
cost-effectiveness even with the most complex fluids.

� TECHNICAL PERFORMANCES
• Pressure: • Flowrate:
- MSH range: up to 24 bar / 348 PSI - MSH range: up to 200 m3/h / 880 US GPM
- MVA-FF range: up to 48 bar / 796 PSI - MVA-FF range: up to 50 m3/h / 220 US GPM
- X-BIO range: up to 12 bar / 174 PSI - X-BIO range: up to 120 m3/h / 528 US GPM

� EXAMPLES OF APPLICATIONS
• Centrifuged & dehydrated sludge from urban shotcrete, mortars, bentonite slurries,
and industrial origin, dewatered sludge recovery magnesium uranate, explosive preparations
further to mechanical dehydration (belt- (minerals and construction)
press, screw-press, centrifuge, filter- press) • Grease, lubricant wastes, putties (mechanics)
(Environment) • Viscose, pigments, precipitated silica
• Starches, glues, kaolin slurry, soapstock (pulp production, styrene resin, paints (chemicals)
& paper) • Bio-mass application, bagasse, crop residues,
• Cement milk, clay sludge, gypsum slurries, liquid manure, cassava pulps (new energies)

44 45
 PCM ECOMOINEAU™ MSH

� PCM ECOMOINEAU™ MSH PUMP CONSTRUCTION

� CLOSE AUGER
• Specially designed for non-
sticky viscous products, it offers a
very high conveying performance
MECHANICAL SEAL thanks to the optimised surface of
its coils

ENLARGED HOPPER

HYDRAULIC FEEDING BARREL

REINFORCED ARTICULATION � OPEN AUGER

• Perfectly responding to the
constraints of the transfer of
sticky products, it allows the flow
of fluid between its core and its
ROTOR openable coils, thus avoiding any
FEEDING SCREW
risk of compaction. The open-coil
auger is the best solution to the
potential overflow of hoppers.

STATOR

BASEFRAME

VERSATILITY
• T ransfer of fluids with high viscosity or low capacity to flow thanks to the
open screw profile
• Handling of fluids requiring manual feeding or gravity fed pumps
� PCM ECOMOINEAU™ MSH RANGE BENEFITS through the enlarged hopper
• Compact and robust articulation

OPTIMAL FEEDING EASY MAINTENANCE

• Optimal feeding of sludge and no risk of compacting thanks to the close auger • J
 oint with rotor grip system with the
• High conveying performance for non-sticky viscous products patented 3-screws system for large
capacity models.

46 47
 PCM ECOMOINEAU™ MVA-FF

� PCM ECOMOINEAU™ MVA-FF PUMP CONSTRUCTION � PCM ECOMOINEAU™ MVA-FF OPTIONS

POLYMER LUBRICATION & LEVEL MANAGEMENT

Polymer lubrication as an add-on option is highly recommended when transferring

ENLARGED HOPPER over long distances. The injection of a lubricating layer on the discharge pipe
+ BRIDGE-BREAKER (option) internal diameter guarantees better yield and reduced operating costs.
GREASE SEALING • Reduction of discharge pressure
• Reduces strain on wearing parts
BUILT-IN
Flow Management: level control module controlling the pump speed and
DRAINING
preventing overflow
HYDRAULIC FEEDING BARREL PORTS
• Adaptable to equipment configurations
REINFORCED • Variable flow-rates functioning
ARTICULATION FEEDING SCREW • Suitable for difficult environments
• Compatible with lime treatment configuration
Level control module

ROTOR
INJECTION PORT
CONTROL HOPPER FOR OPTIMIZED PROCESS
STATOR
The control hopper adapts to up-stream process, from manual feeding batch
or gravity-fed when placed underneath dehydrating equipment.

Made to measure, the control hopper:

• Includes the sludge loading zone,
• Has one or several visit holes to ease inspection,
• Facilitates the incorporation of accessories such as level sensors,
• Accomodates lime injection and relevant air-vent port.

� PCM ECOMOINEAU™ MVA-FF RANGE BENEFITS

� OPTIONS
EASY MAINTENANCE
• B uilt-in draining ports (DN50) allowing complete, draining, Polymer lubrication system
preventing corrosion from residual fluids recommended when transferring over
• Grease sealing: cost effective and automatic lubrication long distances
dispensing self-contained lubricant at the desired rate of the • Reduction of operating costs
residual level • Reduction of discharge pressure
• Reduction of strain on wearing
parts
VERSATILITY
• T ransfer of fluids with high viscosity, high dry matter, sticky Flow management level control module
with a low capacity to flow or that tend to bridge thanks to • Control of the pump speed
the open screw profile • Prevention of overflow
• Handling of fluids requiring manual feeding or gravity fed
pumps through the enlarged hopper Control hopper for optimized process
• Reinforced articulation (metal casing) adapted to abrasive allowing manual feeding batch or
fluids gravity-fed when placed underneath
dehydrating equipment.

48 49
 PCM ECOMOINEAU™ X-BIO

� PCM X-BIO PUMP CONSTRUCTION

304L STAINLESS STEEL HOPPER ROBUST BEARING /
WITH INSPECTION HATCHES ON INTEGRATED BEARING
BOTH SIDES

HIGH-PERFORMANCE
ELASTOMER STATOR
STEEL ROTOR 250μ DEVELOPED IN HOUSE
CHROMED PLATING

TEFLON PACKING GLAND WITH

LUBRICATION OR MECHANICAL
SEAL

HARDOX ARCHIMEDE SCREW

TYPE U UNIVERSAL LIQUID DIGESTATE INJECTION

CONNECTION FLANGES ON EITHER SIDE OF THE
FEED BARREL

� PCM X-BIO FEATURES � PCM X-BIO APPLICATIONS

EXTREME PERFORMANCE PCM X-BIO APPLICATIONS

• C
 apability to transfer fluids at a rate of up to 120 cubic meters per hour with a maximum pressure of The pump designed for biogas production applications!
12 bar
• Can transfer fluids with a high dry matter content (over 50%) The pump's robust construction and solid materials make it ideal to transfer fluids with a very high dry matter
content (over 50%), pasty, thick or viscous.

ADAPTABLE TO EVERY PROCESS The design of the hopper ensures optimum adaptability to all installations. The wide hatches on either side
• 2 inspection doors on each side of the hopper of the hopper can also be used to connect a digestate recirculation circuit to fluidise the raw materials and
• 2 liquid digestate injection flanges to connect recirculation circuit ensure efficient transfer to the digesters.
• Rectangular feed hopper with vertical walls to prevent arching
• Adaptable number and position of hatches for greater flexibility
EXAMPLE OF PUMPED PRODUCT
• ANIMAL BY-PRODUCTS: (Pig and cattle slurry, pig, cattle, and poultry manure, fats, blood, bones...)
ROBUST CONSTRUCTION • CROP RESIDUES (Potato, corn, and cereal pulps, rapeseed meal...)
• Coupling with the motor by bearing or integrated bearing • ABATTOIR WASTE (Intestinal contents, brewery waste, flotation sludge, abattoir fats, molasses...)
• Hardox archimede screw to guarantee long service life • MUNICIPAL WASTE (Used fats, sewage treatment plant sludge, household organic waste, lawn
• Chrome-plated steel rotor to transfer all types of abrasive fluids clippings, sewage treatment plant fats...)
• Optimised service life thanks to a wide choice of elastomers for all applications • FOOD WASTE (Expired supermarket products, restaurant, and cafeteria waste...)

50 51
 PCM DELASCO™ TECHNOLOGY

PCM DELASCO™ PERISTALTIC PUMPS

The ideal choice to reduce maintenance costs

� PRINCIPLE OF PCM DELASCO™ TECHNOLOGY

The peristaltic pumping principle is based on the capacity of a soft elastomer hose to accept a deformation and
subsequently recover its initial shape. Peristaltic pumps are provided with either high or low pressure hoses,
covering a wide range of applications which need versatility and flexibility.

SUCTION TRANSFER DISCHARGE

� BENEFITS
• Media Purity (only one wearing part: the hose)
• Gentle Pumping action
• Seal-less design
• Self-priming
• High suction capacity
• Simplified maintenance
• Low life cycle costs
• No mechanical seals, valves or gaskets
• Reversible

� RANGE OF PCM PERISTALTIC PUMPS

• PCM DX Series
• PCM Z Series
• PCM PMA Series

52 53
 PCM DELASCO™ - DX-Z-PMA SERIES
Peristaltic pumps for corrosive, abrasive and fragile products

With various pump constructions and a wide choice Peristaltic pumps with low operating speeds are ideal
of elastomer hoses, the PCM Delasco™ range covers for fragile and/or abrasive products: the transfer
a wide variety of applications calling for heavy-duty is carried out inside the hose without agitating or
and flexibility. frothing the fluids.

Simple to use and to maintain, PCM Delasco™ They are also the perfect solution to handle corrosive
peristaltic pumps are well suited for a variety of products as only the hose is in contact with the fluid.
demanding conditions of services.

� TECHNICAL PERFORMANCES

• Pressure: • Flowrate:
- DX Series: up to 15 bar [218 psi] - DX Series: up to 100 m3/h [440 gpm]
- Z Series: up to 3 bar [44 psi] - Z Series: up to 20 m3/h [88 gpm]
- PMA Series: 1.5 bar [22 psi] - PMA Series: up to 0.20 m3/h [0.88 gpm]

� EXAMPLES OF APPLICATIONS
• Dosing of chemical products (environment)
• Mortar grout transfer (mines and quarries)
• Wastewater treatment (paper)
• Transfer of slurry (new energies)
• Manufacturing of foam (chemistry)
• Degreasing baths or stripping baths (mechanics)

54 55
 PCM DELASCO™ - DX SERIES

PCM DELASCO™ - DX SERIES

DISASTER / CONTAMINATION PROOF TECHNOLOGY
• 1 00% leak proof body to hold the fluid in case of hose rupture through the double seal and bearing
� PUMP CONSTRUCTION barrier, the integrated buffer zone and the sheath around the connection

EASY AND QUICK MAINTENANCE

• E
 asy on-site maintenance and short downtimes thanks to a unique hose quick release allowing hose
HIGH QUALITY change in only a few minutes
HOSE PLUG-IN DRIVE
SYSTEM
COMPACT FOOTPRINT
• Integrated bearing design allowing to feature one of the smallest footprints on the market

ROBUST DESIGN
• Shock resistant heavy cast X-cover design
• Improved ergonomic design with accessories connected at the pump back

ROBUST DESIGN CUSTOMIZED

SHIMMING FOR AN
OPTIMIZED HOSE � ACCESSORIES
COMPRESSION
VACUUM SYSTEM
 elps the hose recover its
H
STAINLESS STEEL natural shape after it has
HATCH been squeezed by the shoes,
maximising suction lift

HOSE LEAK DETECTOR

 tops the pump in case
S
EASY CONNECTION
of hose rupture via float
QUICK RELEASE
sensor
SYSTEM

� PCM DELASCO™ DX SERIES BENEFITS

ONE PUMP FOR ALL FLUIDS
• Ideal for abrasive and high solids content slurries (up to 80%), high density, corrosive, shear sensitive,
viscous, multiphase, gaseous and crystalizing fluids pumping

OPTIMISED OPEX FOR TOUGH APPLICATIONS

• Only one wearing part: the hose;
• Seal-less design: no expensive sealing to replace and no associated seal-water flushing costs
• Low energy requirements thanks to the inherent low running speed
• Progressive hose compression system to extand hose life thanks to the unique lemon shaped rotor and
deflector design

VERSATILITY
• One pump for all tasks : transfer, dosing, emptying
• Self-priming
• High suction lift
• Reversible
• Can run dry without ancillary protection equipment

56 57
 PCM DELASCO™ Z & PMA SERIES

PCM DELASCO™ - Z SERIES PCM DELASCO™ - PMA SERIES

� PUMP CONSTRUCTION � PUMP CONSTRUCTION
STATOR

HOSE

ROLLER

ROTOR COUNTERFLANGE PLASTIC

STATOR (PVF)

CONNECTING
SLEEVE

FLEXIBLE HOSE
HOSE

� PCM DELASCO™ Z SERIES BENEFITS � PCM DELASCO™ PMA SERIES BENEFITS

EASY AND QUICK MAINTENANCE � OPTIONS EASY AND QUICK MAINTENANCE
• Only one wearing part: the hose • Only one wearing part: the hose
• Maintenance is limited to regular lubrication. • Pump mounted on a trolley • Compact pump
• The hose can be changed without dismantling the pump
• Leak detector senses possible dry
running which makes it possible VERSATILITY
VERSATILITY to stop the pump in case of a hose • Dosing and transfer of low flowrates and low pressure
• Dosing and transfer of low flowrates burst • Better resistance to corrosion thanks to the plastic stator
• Handles corrosive, abrasive and fragile products • Reversible pump
• Dry running operation is possible without damage occuring • Integrated or external frequency
inverter for pump on base or
trolley REDUCED LCC
REDUCED LCC • Reduced maintenance times
• Reduced maintenance time and costs • Starter and connector for pump on • Low cost spare parts
• Reduced consumption of energy base or trolley • Low OPEX and CAPEX

58 59
 PCM LAGOA TECHNOLOGY

PCM LAGOA DIAPHRAGM DOSING

PUMPS
Accuracy and reliability: ingredients of successful dosing

� PCM LAGOA TECHNOLOGY PRINCIPLE

The PCM Lagoa pump is composed of a diaphragm connected to a piston which alternating movement successively
fills and empties the pumphead.

1- The backward movement of the diaphragm opens the bottom check valve and allows the entry of fluid, which
fills the pumphead.

2- The forward movement of the diaphragm closes the bottom check valve, opens the top check valve and expels
the dose.

SUCTION DISCHARGE

� BENEFITS
• Reliability of metering
• Simplified maintenance
• Dry-running
• Simple and robust

� RANGE OF PCM DIAPHRAGM DOSING PUMPS

• PCM Lagoa

60 61
 PCM LAGOA
The simple and reliable diaphragm dosing pump

The PCM Lagoa Series is designed for metering a in chemically inert PTFE and pumpheads are available
wide variety of products in chemical engineering and in several material combinations to better match with
environmental applications. the fluid characteristics. The capacity of the pump is
set by adjusting a micrometer graduated dial that can
be locked in position to ensure that the setting does
The pump is driven by a direct mounted light alloy
not change inadvertently.
maintenance-free motor with IP55 protection. The part
of the diaphragm in contact with the pumped liquid is

� TECHNICAL PERFORMANCES

• Maximum flowrate: 315 l/h [1.39 gpm] per pumphead

• Maximum pressure: 12 bar [174 psi]
• Maximum temperature: 90°c

� EXAMPLES OF APPLICATIONS
• Dosing of chemicals products (environment)
• Dosing of flocculants (mines and quarries)
• Preparation of coatings (paper)
• Dosing of polymer (new energies)
• Treatment of reagents / additives (chemistry)
• Metering of chemical products (mechanics)

62 63
 PCM LAGOA

� PUMP CONSTRUCTION SIMPLIFIED MAINTENANCE

• The bearings are greased for life, making the motors maintenance-free.
• The capacity is set by turning the micrometer dial which is fitted with vernier scale graduated in
percentage stroke length. Electric servo control can be fitted.
• The pumphead is easy to remove and change.

DRIVE ELECTRO-MECHANICAL DRIVE

• Does not cause and is not affected by interferences
• Reduced mechanical and hydraulic shocks
• Silent

PUMPHEAD

� OPTIONS AND ACCESSORIES

FOOT VALVES
LOCKING
• Filter undesirable particles and keep the pump primed when stopped
DEVICE

PREFORMED INJECTION LANCE

DIAPHRAGM • Enables your product to be injected in a vein without polluting the injection pipework (non-return
function)

SAFETY AND RETENTION VALVES

• Prevent excess flow and pressures, siphoning and underloading
STROKE
ADJUSTEMENT CASING PULSATION DAMPERS
• To render your flow linear and lessen fluid hammer effects

"READY-TO-METERS" ASSEMBLIES
• Connecting system to the entire pump
� PCM LAGOA RANGE BENEFITS

SIMPLE AND ROBUST CONSTRUCTION

• The pump is driven by a direct mounted light alloy motor with IP55 protection.
• The casing is made of cast aluminium alloy.
� PCM LAGOA MULTIPLEXING BENEFITS
RELIABILITY • Perform proportional metering with different fluids
• Reliability of metering. • Obtain a greater flow than with one single pumphead
• The stroke adjustment mechanism can be locked in position to ensure that stroke length remains at its • Phase the pump stroke to prevent pulsations and thereby
set point. achieving linear flow

VERSATILITY
• Dosing of a wide range of fluids.
• Pumpheads are available in many material combinations. It consists of 1 suction check valve, 1
discharge check valve, 1 liquid end body.
• Dry-running.

64 65
 PCM GRINDERS & MACERATORS
A cost effective way to protect pumps and other downstream
equipment
� INLINE GRINDERS PRINCIPLE
Many industrial processes for the transfer or dosing of fluids are about products like effluent, sludge or other
waste type often loaded with solids or semi-solids. In order for the pumping of such fluids to remain possible, it
is important that the installations used have grinding equipment capable of reducing the solids to fine particles in
order to protect the downstream equipment without slowing down or interrupting the entire process.

PCM offers technologies that are well suited to different types of waste to be grinded and offers a macerator for
filamentous string-type materials and a grinder for solid wood, plastic or pebble material.

The PCM Macerator is a simple and reliable solution for the protection of pumps using a proven concept based
on a perforated plate and a rotary cutting head.This macerator protects the pumps against fibers, filaments and
stringy particles of large size.
Thanks to its cartridge cutter system, the PCM X-Guard has been designed to shred solid pieces into small and
fines particles. It allows to remove solids waste from fluids before they are processed and can damaged your
process equipment.

� BENEFITS � EXAMPLE OF APPLICATIONS

• Protection of the pump reliability • Protection of dewatering equipment in
• Protection of the downstream equipment wastewater treatment
• Simplified maintenance • Fabrics, rags, stone grinding in mining
• Low life cycle costs applications
• Optimal cutting and grinding performances • Pre-conditioning of organic waste for
composting
� RANGE OF PCM GRINDERS • Primary sludge in wastewater treatment
• Protection of pumps against filings and long
• PCM X-Guard particles
• PCM Macerator • Improved pre-conditioning of biological sludge

66 67
 PCM X-GUARD

PCM X-GUARD � PCM X-GUARD CONSTRUCTION

In-line grinder to shred solid pieces in fluids before they can damage
your downstream equipment

The PCM X-Guard in-line grinder reduces tough

wastewater solids to fine particles. It grinds and
GEARMOTOR
shreds rags, pieces of wood, plastics or any other
solid or semi-solid pieces that could otherwise clog
valves, damage pumps or any other downstream
equipment.

Its cartridge cutter system, extremely robust and

COUPLING DRIVE
delivering high torque at low rotational speeds, is
ideal for improving the performance of treatment
and dewatering equipment for sludge or highly
charged fluids.

PCM X-Guard prevents costly damages, time

DIFFERENT FLANGES
consuming repairs, or unplanned maintenance AVAILABLE
operations. Furthermore, PCM X-Guard can
contribute to a better performance of the sludge ROTARY KNIVES
treatment or dewatering equipment in helping to
better precondition the sludge. COUNTER-KNIVES

CAST IRON BASEPLATE

� TECHNICAL PERFORMANCES
• Flowrate: up to 65l/sec (234m3/h) [1030 gpm]
• Particles: reduced to 5-6 mm

KNIFE CAGE

� PCM X-GUARD BENEFITS LARGE CHOICE OF DRIVE AND FLANGES

• Bearing drive mounting with elastic coupling: 4
HIGH CUTTING PERFORMANCE power choices � ACCESSORIES A: Emergency stop
• Particles reduced to 5-6 mm • Variety of flanges: optimized adaptability to cus-
B: On/off switch
• High torque / low speed tomer’s pipe Option
• Heat treated steel cutters C: Window for checking and modifying PLC
• Anti-clogging autoreverse
• 4 knives increase the grindind frequency: SIMPLE MAINTENANCE parameters
control through control panel
fewer missed particles in the fluid, more efficient • Single shaft design
and automation - 190 mm D: Manual/ automatic operation switch
grinding • Cutter’s cartridge design
• Slide inspection hatch square entry E: Motor rotation inverter switch
LOW IMPACT ON HYDRAULICS • Knives and counter knives interchangeable,
F: Start
• Less than 0.5 bar head loss reversible and removable
G: Stop
H: Machine operation indicator light
I: Machine operation indicator light
68 69
 PCM MACERATOR

PCM MACERATOR � PCM MACERATOR CONSTRUCTION

The pump protection from rags, fibers and

long particles for all water works

PCM Macerator offers a cost-effective way to protect the

reliability of the pumps.
It can protect the pumps from rags, fibers and solid
particles, using a proven concept which is based on a
perforated shear plate and a rotating headstock.

Suitable for all water works, it offers the pump protection

from fibers and long particles, the improvement of
preconditioning in the primary treatment. It is also able
to replace in-flow grinders.

Specially designed for sludge applications,

PCM Macerator is suitable for new water plants or
as a retrofit for old pipeliners. It can also be used as
protection for pumping stations handling raw sewage, as
well as maceration and mixing in a range of industries,
from paper to oil.

INTERCHANGEABLE
CARTRIDGE ASSEMBLY

EASY ACCESS
TO STONE TRAPS
BASE CASING

SETTLING
OUT SUMP
� TECHNICAL PERFORMANCES
• Flowrate: up to 111 l/sec (400 m3/h) [1761 gpm]
• Fluid concentration: up to 150 g/l � PCM MACERATOR BENEFITS
EASY MAINTENANCE
• Few spare parts
• Interchangeable cartridge assembly
• Easy access to stone traps on both sides to clean out sump

OPTIMAL CUTTING PERFORMANCES

• Shearplate and headstock assembly designed for a smother cut
� EXAMPLES OF APPLICATIONS
• Primary sludge in waste water treatments COMPETITIVE THROUGH LOWER COST OF OWNERSHIP
• Pump protection from fibers and long particles • Lower running costs
• Improvement of biological sludge preconditioning • Less power requirements
• Reduced downtime for routine servicing
• Protection of the downstream pump reliability

70 71
 AT YOUR SERVICE

� TRAINING � INSTALLATION AUDITS

In order to support and train the professionals who The Life Cycle Costs audit will optimise the use of your
handle our pumps, we can arrange training sessions pump while reducing costs related to inefficiency,
either at customers sites, or PCM facilities. rationalising your stock of spare parts and controlling
your overall costs.
The PCM training enables the participants to maintain
the value of the pump to minimise the consequential Our extensive service includes:
costs for maintenance or service even more. • a complete inspection of your facilities,
• an analysis of your spare parts consumption,
• a detailed report and our recommendations to
help you optimise your costs.
� MAINTENANCE, REPAIRING &
UPGRADE
We offer a full range of services to ensure optimum � COMMISSIONING
operation of your pumps as well as time and cost
savings. PCM pumps are simple to use and efficient as long as
they are installed and commissioned properly.
Maintenance services for PCM pumps are provided
by our highly trained engineers. This ensures that Through pre-operational checks and close monitoring
pumps are maintained at optimal operating levels. of all equipment, our installation services implement
Our careful monitoring and expertise helps to stable and secure production.
minimise production downtime and increase the
global run life of the system. Our installation services take the guesswork out of
integrating a new pump into an existing system or
We provide a wide range of after-sales services: installing a new pump from scratch. We provide start-

AT YOUR SERVICE • maintenance on customer's site,

• PCM workshop maintenance,
up assistance, system integration engineering and
training for operators.
• maintenance contracts,
In order to provide the best use of our pumps and pumping systems, • mechanical seals and rotors refurbishement,
we offer a wide range of pre- and post-sales services. • systems upgrade.

All of our services are designed with one goal in mind: optimising the performance of PCM pumps. From preventive � SPARE PARTS
maintenance to spare parts management, from equipment upgrading to training, we can strongly contribute to the
Thanks to our worldwide network of sales agencies
productivity of our customers.
and distributors, you can obtain genuine PCM spare
parts quickly. Using PCM spare parts ensures that
PCM products last as long as possible, benefit from
warranty protection and maintain their CE conformity
� EXTENDED WARRANTY � TESTS until their end of life.
The extended warranty ensures: To ensure the performance and lifespan of a pump or
PCM experts are dedicated to spare parts and answer
• an extension of our guarantee according to a system, it is vital that the equipment is engineered to
your request in the shortest time. Thus, available
our General Sales Conditions, meet the needs of the materials being handled. That is
standard PCM spare parts can be delivered within
• the best solution for delayed installation or why we provide a wide offer of tests:
24hrs (depending on the location).
commissionning cases, • chemical compatibility tests,
• the peace of mind at a reasonable cost. • viscosity tests,
• abrasiveness tests.
Our extensive service includes also an extension for
the general guarantee conditions for a period from one
to four years according to your requirements.

72 73
 NOTES

NOTES

74 75
www.pcm.eu
Ref B-000337 - Index H - 04/2024 - Non contractual pictures