CEAP 2024 Information Booklet

COMMON ENGINEERING ADMISSION PROCEDURE 2024
CEAP 2024
INFORMATION AND INSTRUCTIONS TO CANDIDATES
(FOR GATE CATEGORY ONLY)

COMMON ENGINEERING ADMISSION PROCEDURE 2024
(CEAP - 2024)
Admission to M. E. /M. Tech./M. Arch./M. Plan. Degree Programmes
INFORMATION AND INSTRUCTIONS TO CANDIDATES
(FOR GATE CATEGORY ONLY)
NOTE:
 Candidates who have GATE 2022 / 2023 / 2024 scores and opt for admission based on
GATE scores should apply online through the Registration Portal referred herein.
 Candidates with GATE (Engineering Science (X E) / Life Science (X L)) scores must have
appeared for CEETA-PG 2024 also.
 Candidates who have registered for CEETA-PG 2024 and who opt for admission through
CEETA-PG category need not apply through the Registration Portal referred herein.
Admission for such of those candidates will be based on CEETA-PG scores only and the
eligible candidates will receive notification for CEAP 2024 in the month of June.
Online applications are invited from candidates with GATE scores for admission to M.E. /
M.Tech. / M.Arch. / M.Plan. degree programmes offered in the University Departments of Anna
University, Regional campuses and Constituent Colleges of Anna University, Annamalai
University, Government Engineering Colleges, Government-Aided Engineering Colleges and
Technical Institutions funded by Central Government & affiliated to Anna University. The
eligible candidates will be called for the online single window counseling, Common Engineering
Admission Procedure (CEAP - 2024).
1. GENERAL STRUCTURE OF P.G. PROGRAMMES
Full-Time PG programmes comprise of 4 semesters (2 years).
2. MODE OF STUDY
Candidates admitted should be available in the department during working hours for the
curricular, co-curricular and extra-curricular activities. Candidates should not attend any
other Full-Time Programme(s) / Course(s) or take up any Full- Time Job / Part-Time Job
in any institution or company during the period of the programme. Violation of the above
rules will result in termination from the programme.
3. CATEGORY OF INSTITUTIONS
The Government of Tamil Nadu in G.O. (D) No. 53 HE (J2) Department dated: 29.02.2024
have permitted Anna University, Chennai-25 for the conduct of single window counseling
through Common Engineering Admission Procedure (CEAP-2024) for M.E. / M.Tech./
M.Arch. / M.Plan. degree programmes offered at
(i) University Departments / Regional Campuses / Constituent Colleges of
Anna University.
(ii) Annamalai University, Chidambaram
(iii) Government and Government Aided Engineering Colleges
(iv) Technical Institutions funded by Central Government & affiliated to Anna University
4. ELIGIBILITY
The eligible candidates for CEAP 2024 under GATE category shall satisfy
 One of the conditions listed under A. QUALIFYING DEGREE

AND
 One of the conditions specified under B. GATE
A. QUALIFYING DEGREE
a. Candidates who have passed all the subjects in the recognized Bachelor's degree or
equivalent in the relevant field in the qualifying degree examination as per Anna University
norms are eligible.
Candidates appearing for the final semester / year University examination of the
qualifying degree programmes in April / May 2024 (except A.M.I.E. and other similar
certificates of various professional bodies) are eligible. They should produce Original
Degree / Provisional Certificate & Consolidated Mark sheet / Mark sheets for all semesters
at least one month before the Date of Commencement of the first semester PG
examinations. If they fail to do so, the Provisional admission automatically stands
cancelled. Such candidates shall be asked to discontinue the programme.
(OR)
b. Candidates with Section ‘A’ & ‘B’ certificates (e.g. A.M.I.E.) of the Institution of
Engineers and other similar certificates of various professional bodies for example
(Aeronautical Society of India), recognised by the Ministry of Human Resources
Development, Government of India and enrolled before 31.5.2013 are considered to be
equivalent to B.E./ B.Tech degree holders for admission to M.E./ M.Tech. degree
programmes subject to the following two conditions:
 Should have studied 10 + 2 years + AMIE (with 2 years experience after passing
AMIE) (or) 10 + 3 Years diploma (awarded by the State Board of Technical
Education) + AMIE (with 2 years experience after passing AMIE).
 Should have Two years regular full time Teaching experience / Industrial
experience in the relevant field after passing all the subjects including project
work. The experience certificate will have to be produced by the candidate.
The eligible branches of UG for the various PG programmes are listed in Annexure I
NOTE:
If a candidate claims that the educational qualification possessed by him / her (though not
the same as prescribed eligible qualification) is equivalent to the eligible qualification
prescribed in Annexure I, he / she should obtain the Eligibility Certificate from the Director,
Academic Courses, Anna University, Chennai 600 025 on or before the last date prescribed
for registration of the online application. However, the claim would be subject to the decision
of the admitting authority.
NOTE:
(a) The candidate is not eligible if the qualifying degree is a one year PG degree
program.
(b) The candidate is not eligible if the qualifying degree B.E./B.Tech is obtained through
Distance Mode / Week End Mode.
(c) Candidates who have obtained the qualifying degree without studying X std OR
XII std (other than 10+3 Diploma holders) are not eligible
B. GATE
a) The candidate should have G AT E 2022 / 2023 / 2024 score in the appropriate discipline
of Engineering / Technology
(OR)
b) The candidate should have G AT E 2022 / 2023 / 2024 score in Engineering Science
(X E) / Life Science (X L) papers AND CEETA-PG 2024 percentile score.
5. MERIT LIST UNDER GATE CATEGORY
(i) GATE [Engineering / Technology] Category: Candidates who have GATE 2022 / 2023
/ 2024 score in the appropriate discipline of Engineering / Technology. The merit list will
be prepared based on t h e GATE 2022 / 2023 / 2024 percentile score in the appropriate
discipline of Engineering / Technology.
(ii) GATE [Engineering Science (XE) / Life Science (XL)] Category: Candidates who have
GATE 2022 / 2023 / 2024 score in Engineering Sciences (XE) / Life Sciences (XL) papers.
Candidates under this category should have also appeared for CEETA-PG 2024 conducted
by Anna University, Chennai. The overall mark is calculated by considering appropriate
GATE 2022 / 2023 / 2024 percentile score and CEETA-PG 2024 percentile score in the
ratio 70:30.
A common Merit list will be prepared for both GATE [Engineering / Technology] and GATE
[(Engineering Science (XE) / Life Science (XL)] categories based on Tamil Nadu (TN)
Reservation Policy.
The minimum eligible marks for GATE 2022 / 2023 / 2024 in the appropriate discipline of
Engineering / Technology are given in below:
SC/SCA/ST (candidates BC/BCM/MBC/DNC Others (OC)
Paper belonging to Tamil Nadu (candidates belonging to (irrespective of
Identity only) Tamil Nadu only) Communities)
2022 2023 2024 2022 2023 2024 2022 2023 2024
AE 19.8 16.7 22.1 26.8 22.5 29.9 29.8 25.1 33.3
AG 17.5 16.6 16.6 23.6 22.5 22.5 26.3 25 25
AR 24.8 22.4 27.6 33.5 30.3 37.3 37.3 33.7 41.5
BM 16.6 16.6 16.6 22.5 22.5 22.5 25 25 25
BT 23.6 21 25.9 31.9 28.4 35 35.5 31.6 38.9
CE 20.2 17.7 18.8 27.3 23.9 25.4 30.4 26.6 28.3
CH 16.8 21.4 16.6 22.7 28.8 22.5 25.3 32.1 25
CS 16.6 21.6 18.4 22.5 29.2 24.8 25 32.5 27.6
CY 18.3 17.6 16.7 24.7 23.8 22.6 27.5 26.5 25.2
EC 16.6 19.9 16.6 22.5 26.9 22.5 25 29.9 25
EE 20.4 16.6 17.1 27.6 22.5 23.1 30.7 25 25.7
ES 17.2 18.4 25.2 23.3 24.9 34.1 25.9 27.7 37.9
EY 22.2 28.4 23.8 30 38.3 32.2 33.4 42.6 35.8
32.4 24.4 28 43.8 33 37.8 48.7 36.7 42
GG
36.5 31.8 32.6 49.3 42.9 44.1 54.8 47.7 49
IN 28.2 23.2 21.8 38.1 31.3 29.4 42.4 34.8 32.7
MA 18.2 16.6 16.6 24.5 22.5 22.5 27.3 25 25
ME 18.7 18.9 19 25.2 25.5 25.7 28.1 28.4 28.6
MN 17 16.6 16.6 22.9 22.5 22.5 25.5 25 25
MT 30.8 31.6 27.3 41.5 42.7 36.9 46.2 47.5 41
PE 25.1 22.9 28.4 34 30.9 38.3 37.8 34.4 42.6
PH 17.6 20.7 21.3 23.8 27.9 28.8 26.5 31.1 32
PI 29.1 29.4 20.3 23.8
39.3 39.7 27.4 43.7 44.2 30.5
ST 16.6 16.6 17.7 22.5 22.5 23.9 25 25 26.6
TF 25.8 16.9 18.7 34.9 22.8 25.2 38.8 25.4 28.1
XE 26.8 25.2 24.1 36.2 34.1 32.5 40.3 37.9 36.2
XL 22.5 21.9 19.5 30.5 29.6 26.3 33.9 32.9 29.3
GE 26.9 19.1 27.4 36.3 25.8 36.9 40.4 28.7 41.1
NM 18.5 16.6 16.7 25 22.5 22.5 27.8 25 25.1
DA - - 24.7 - - 33.3 - - 37.1
A common merit list will be prepared for GATE (Engineering / Technology) and GATE
(Engineering Sciences ( X E ) / Life Sciences ( X L )) category. Merit List will be prepared in
accordance with Tamil Nadu Reservation Policy. In case, more than one candidate has got the
same marks in the common rank list, inter-se rank among such candidates shall be determined
in the order of priority as given below.
1. Total marks in X Standard Examination in percentage

2. Date of Birth (Senior will be placed above)
3. Random Number Assigned
The merit list will be published in Anna University W eb Portal.
6. NATIVITY
Candidates who are native of Tamil Nadu and have studied 5 years continuously (12 +
B.E./B.Tech or Diploma + B.E./B.Tech or B.Sc +M.Sc) in Tamil Nadu need not submit Nativity
Certificate. Candidates who are Native of Tamil Nadu but have studied XIIstd or / and Diploma,
Degree outside Tamil Nadu have to upload the Nativity Certificate only in digitally signed e-
certificate for considering them as Tamil Nadu Candidates. Other State candidates will be
considered under Open Competition (OC) Category.
7. COMMUNAL RESERVATION
Seats shall be allocated following the Rule of Reservation of the Govt. of Tamil Nadu as
given below.
Rule of Reservation
1. O p e n C o m p e t it i o n (OC) 3 1. 0%
2. B a c k w a r d C la s s (BC) 2 6. 5%
3. B a c k w a r d C la s s - M u s l i m (BCM) 3 .5%
4. M o s t B a c k w a r d C la s s & D e n o t i f i e d
20.0%
C o m m u n i t i e s (M B C & D N C)
5. S c h e d u l e d C a s t e (SC) 1 5. 0%
6. S c h e d u l e d C a s t e - A r u n t h a t h i y a r s (SCA) 3 . 0%
7. S c h e d u l e d T r i b e s (ST) 1 . 0%
Tamil Nadu Native candidates alone will be considered for communal reservation.
The list of communities is given in Annexure – II. Other State candidates will be considered
under Open Competition (OC) Category.
Candidates seeking admission against BC / BCM / MBC & DNC / SC / SCA / ST categories
should have obtained the community certificate (Card format or digitally signed e-Certificate)
from a competent authority specified in Table -I.
TABLE – I
Community Issuing Authority
Backward Class /
Headquarters Deputy Tahsildar / Zonal DeputyTahsildar /
BackwardClass (Muslim) /
Deputy Tahsildar (Certificates)
Most Backward Class
Scheduled Caste / Scheduled
Tahsildar of Native District
Caste (Arunthathiyars)
Revenue Divisional Officer or Sub-Collector of their native
place (except Chennai) or P.A. (General) to Collector of
Scheduled Tribe Chennai. The Community Certificate card issued by
Tahsildars upto 11.11.1989 is valid.
Married women should possess Community Certificate issued in Father’s name only.
a) Community Certificates obtained from Other States will not be considered for
communal reservation.
b) For communities linked with districts, the candidate should obtain their community
certificate in their respective districts. Community certificates obtained from other
than their respective districts will not be considered. However, the candidates who
belong to BC, MBC and DNC communities in a particular district, migrated to
other places in Tamil Nadu and obtained community certificates from competent
authorities in the migrated district on or after 28.10.2009, will be considered. (as
per G.O. (St) No. 95 BC, MBC & Minorities Welfare Department, dated :
28.10.2009).
c) Candidates who are native of Tamil Nadu and have studied 5 years continuously
(12 + B.E./B.Tech or Diploma + B.E./B.Tech or B.Sc +M.Sc) in Tamil Nadu
need not submit Nativity Certificate. Candidates who are Native of Tamil Nadu
but have studied XIIstd or / and Diploma, Degree outside Tamil Nadu have to
upload the Nativity Certificate only in digitally signed e-certificate for
considering them as Tamil Nadu Candidates. Other State candidates will be
considered under Open Competition (OC) Category.
d) Candidates who failed to upload a self-attested photocopy of the permanent
community card or digitally signed e-certificate at the time of registration of the
application will be treated under Open Competition (OC) category. In the event
of such a decision, the eligibility conditions and rules prescribed for OC category
will be applicable for such candidates.
8. DIFFERENTLY ABLED PERSONS CATEGORY:
Only Tamil Nadu Native Candidates are eligible for reservation under this category.
Five percent of seats are reserved for Differently Abled Persons @ 1% for each
of the following category:
a) Blindness and low vision.
b) Deaf and hard hearing.
c) Locomotor disability including cerebral paisy, leprosy cured dwarfism acid attack
victims and muscular dystrophy.
d) Autism, intellectual disability, specific learning disability and mental illness.
e) Multiple disabilities from amongst persons under clauses (a) to (d) including deaf-
blindness in the programme identified for each disabilities
The Competent Authority to issue Disability Certificate is District Medical Board duly
constituted by the State Government. The District Medical Board shall consist of a minimum
of three members (Chairman and two Members) out of which atleast one shall be a specialist
depending on the disability prescribed.
Certificate obtained from an individual doctor will NOT be considered.
For details to refer Annexure III
9. GENERAL INFORMATION ABOUT CEAP FOR GATE CATEGORY
 Candidate should apply only through online Web Portal & upload the prescribed
documents:
www.annauniv.edu/ceap2024
 Application has to be registered separately for each category, viz., GATE
(Engineering / Technology) and GATE (Engineering Science (XE) / Life Science (XL)).
 Registration fee is to be paid online.
 Anna University will publish the Merit List for GATE category in the Web Portal:
cfa.annauniv.edu/ceap2024
 For the eligible students, Online Counselling will be conducted through the Web
Portal:
 Selection of the College and Branch of study during Counselling is the sole responsibility
of the candidate.
 At the end of counselling, the selected students will be given Provisional Allotment for
a particular Branch and Institution.
 Under no circumstances, the College or Branch allotted would be changed.
10. REGISTRATION FEE FOR GATE CATEGORY
Application / Registration fees for GATE category (only Online Payment) is Rs.1000/- (+18%
GST) for candidates belonging to OC / BC / BCM / MBC & DNC and Rs.500/-(+18%GST)
for candidates belonging to SC / SCA / ST.
11. PROCEDURE FOR REGISTRATION OF APPLICATION
 Candidate should apply only through online in the Web Portal

www.annauniv.edu/ceap2024
 The candidate should use a valid and functional e-mail id and a valid and functional
mobile number for registration o f online application. The registered email id and
mobile number must be maintained active, as all the communication to the
candidates will be sent ei t he r t h ro u gh S MS or e-mail only.
 GATE paper code is given in Annexure IV
 UPLOAD THE RELEVANT DOCUMENTS:

 Upload a good quality passport size photograph taken recently in .jpg format
(size: 10 KB to 50 KB)
 GATE 2022 / 2023 / 2024 score card.
 X Standard Mark Sheet
 XII Standard Mark Sheet / Diploma Certificate
 Candidates who have completed the UG Degree Programme in 2022 or prior to
2022
o Degree Certificate (or) Provisional Certificate.
o Consolidated Mark sheet (or) Mark sheets of all Semesters of the
Qualifying Degree Examination completed.
 Candidates appearing for April / May 2024 Final Semester (or year) University
Examinations are also eligible to apply. Such candidates have to upload the
following Documents:
o Bonafide Certificate obtained from the Head of the Institution where
the candidate is studying (or) photocopy of the April / May 2024
University Examination Hall Ticket.
o Mark sheets issued by the University for all the semesters upto the pre-
final year of the Qualifying Degree Examination.
 Permanent Community Certificate (If applicable) in Card Format / Digitally
Signed e-Certificate in the case of BC / BCM / MBC & DNC / SC / SCA / ST
candidates (with Tamil Nadu Nativity).
 Medical Certificate issued by the District Medical Board for Differently Abled
Persons category (If applicable).
 Nativity Certificate (if applicable) only as Digitally signed e-Certificate.
 After entering all the details, choose save button. The entered details can be viewed,
in case if any changes are to be made, the applicant can make the changes. After
t h e f i n a l r e v i e w , the candidate should click the submit and save button.
 The candidate need not send the printout of the online application or any other
documents.
 The applications received by means other than the prescribed online application
portal will be summarily rejected.
 Online applications with concessional fee, submitted by the candidates other than
SC/SCA/ST will be summarily rejected.
 Information like the courses offered, facilities etc., will be uploaded in Anna
University Web Portal. Other details regarding scholarship, fee concession, hostel
facilities etc., can be obtained from the Principal / Dean of the Institutions
concerned.
12. COUNSELING
o Before the commencement of Online Counseling, the Counseling schedule and

details of the Counselling process of CEAP 2024 will be published in Anna
University Web Portal:
o Once the Rank list had been published, candidates can access the following Web
Portal for exercising the Choice of the Campus / Branch of the Study.
The Online Counseling will be conducted through the Web Portal:
o Admission will be offered depending upon the seats available based on the merit
of the candidates as per the reservation norms of Government of Tamil Nadu.
o The list of institutions participating in Single Window Counseling through

CEAP 2024 is given in Annexure V
o The availability of number of seats / courses / branches h o s t e d in the Anna

University Web Portal is subject to change before the counseling.
o A candidate can get allotment for one programme only.
o College / Branch once allotted will not be changed under any circumstances.
o Unfilled seats if any, under GATE category will be converted to CEETA-PG 2024
Category in the respective communities.
13. POST MATRIC SCHOLARSHIP
In the G.O. (st) No. 6 Adi Dravidar and Tribal Welfare (AD3) Department dated 09.01.2012,
G.O. (st) No. 92 Adi Dravidar and Tribal Welfare (AD3) Department dated 11.09.2012 and
G.O. (st) No. 16 Adi Dravidar and Tribal Welfare (AD3) Department dated 24.02.2014, the
Government have ordered to grant Post Matric Scholarship to SC/SCA/ST candidates and
SC/SCA converted Christians, whose parental annual income is less than Rs. 2,50,000/- from
all the sources shall only be eligible. The eligible candidates have to submit income certificate
obtained from appropriate authorities and get the Post Matric Scholarship from the colleges
where they get admitted.
NOTE:
Candidates who have passed the UG Degree programme in 2023 or prior to 2023 should
produce the Original Degree Certificate / Provisional Certificate & Consolidated Mark
Sheet / Mark Sheets of all the semesters at the time of Admission. However, those candidate
appearing for April / May 2024 University Examinations should produce the original Mark
sheets for all the semesters upto the pre-final year for securing Provisional Admission. They
should produce Original Degree / Provisional Certificate & Consolidated Mark sheet / Mark
sheets for all semesters at least one month before the date of Commencement of the first
semester PG examinations. If they fail to do so, the Provisional admission automatically
stands cancelled. Such candidates shall be asked to discontinue the programme.
IMPORTANT DATES:
St art Date End Date
Applicati on Regist rat ion www.annauniv.edu/ceap2024
15.04.2024 14.05.2024
Publ icati on of Merit Li st cfa.annauniv.edu/ceap2024 20.05.2024

(6:00 p.m .)
O nli ne Counseli ng cfa.annauniv.edu/ceap2024 26.05.2024

ANNEXURE I– I
ANNEXURE
ELIGIBILITY QUALIFICATIONS FOR ADMISSION TO VARIOUS

M.E. / M.Tech. / M.Arch. / M.Plan. /M.C.A./M.B.A. Degree Programmes
CEETA – 2024
I. FACULTY OF CIVIL ENGINEERING

Sl.
P.G Programmes Eligible Qualifications
No.
1. M.E. Construction Engineering
2. M.E. Construction Management
3. M.E. Construction Engineering and
Management B.E. / B.Tech.
4. M.E. Computer Methods and Application in 1. Civil Engineering
Structural Engineering 2. Civil and Structural Engineering
5. M. Tech. Geo-technical Engineering 3. Civil Engineering and Planning
6. M.E. Structural Engineering
7. M.E. Structural Engineering and Construction
8. M.E. Soil Mechanics and Foundation
Engineering
9. M.E. Transportation Engineering B.E. / B.Tech.
1. Civil Engineering
2. Civil and Structural Engineering
3. Civil Engineering and Planning
4. Geoinformatics
10. M.E. Infrastructure Engineering B.E. / B.Tech.
11. M.E. Infrastructure Engineering and 1. Civil Engineering
Management 2. Civil and Structural Engineering
4. Geoinformatics
12. M.E. Environmental Engineering B.E. / B.Tech.
2. Agricultural and Irrigation Engineering
3. Environmental Engineering
4. Chemical Engineering
5. Geo-informatics Engineering
6. B.Tech. (Energy and Environmental
Engineering) of Tamil Nadu Agricultural
University, Coimbatore.
7. Chemical and Electrochemical Engineering
9. Agriculture Engineering
10. B. Tech. (Agricultural Engineering) of Tamil
Nadu Agricultural University, Coimbatore.
12. Agricultural Engineering
(or)
B.E. /B. Tech.
13. Mechanical Engineering (sponsored candidates
from Government organ i zati on s)
14. Electrical Engineering (with 3 years of relevant
experience) (sponsored candidates from
Government organizations)
Page 1 of 28
Sl.No. P.G Programmes Eligible Qualifications
13. M.E. Environmental Management B.E. / B.Tech.
5. B.E./B.Tech. (other branches) with 3 years’
experience in the field of Environmental
Management / Environmental Engg.
6. B.Tech. (Energy and Environmental
Engineering) of Tamilnadu Agricultural
University, Coimbatore.
7. Petrochemical Technology
14. M.E. Environmental Engineering and B.E. / B.Tech.

Management 1. Civil Engineering
3. Bio-Technology
4. Industrial Bio-T echnology
8. Mechanical Engineering with 3 years’ experience
in the field of Environmental Management /
Environmental Engin e e ri n g
9. Electrical and Electronics Engineering with 3
years’ experience in the field of Environmental
Management / Environmental Engineering
11. B. Tech. (Agricultural Engineering) of Tamil
Nadu Agricultural University, Coimbatore.
15. M.E. Hydrology and Water B.E. / B.Tech.
Resources Engineering 1. Civil Engineering
4. Geoinformatics
16. M.E. Irrigation Water Management 5. B.Tech. (Agricultural Engineering) of Tamil Nadu
Agricultural University, Coimbatore.
Page 2 of 28
Sl. No. P.G Programmes Eligible Qualifications
17. M. Tech. Remote Sensing B.E. / B.Tech.
18. M.E. Remote Sensing and Geomatics 1. Civil Engineering
19. M. Tech. Remote Sensing and GIS 2. Geoinformatics
5. B.Tech. (Agricultural Engineering) of Tamil Nadu
Agricultural University, Coimbatore.
20. M. Tech. Ocean Technology B.E. / B.Tech.

2. Marine Engineering
3. Mechanical Engineering
4. Geoinformatics
7. Agricultural and irrigation Engineering
10. Fisheries Engineering
Page 3 of 28
II. FACULTY OF MECHANICAL ENGINEERING
Sl.
P.G. Programmes Eligible Qualifications
No.
1. M.E. Aeronautical Engineering B.E. / B.Tech.
1. Aeronautical Engg.
2. Mechanical Engg./ Mechanical Engg. (Sandwich)
3. Aerospace Tech.
4. Civil Engg.
5. Mechatronics/ Mechatronics Engg.
6. Mechanical and Automation Engg
7. Robotics and Automation
2. M.E. Aerospace Technology B.E. / B.Tech.
1. Mechanical Engg./ Mechanical Engg.(Sandwich)
3. Mechatronics / Mechatronics Engg.
4. Aerospace Tech
3. M.Tech. Aviation Technology B.E. / B.Tech.
3. Production Tech./Engg./Production Engg. (Sandwich)
4. Aerospace Tech.
5. Electronics and Communication Engg.
6. Mechatronics/ Mechatronics Engg
7. Industrial Engg
8. Manufacturing Engg./Tech
4. M.E. Automobile Engineering B.E. / B.Tech.
1. Automobile Engg.
3. Production Engg./Tech./Production Engg. (Sandwich)
4. Manufacturing Engg./Tech.
5. Mechatronics/Mechatronics Engg.
6. Mechanical and Automation Engg.
5. M.E. Automotive Engineering B.E. / B.Tech.
3. Automobile Engg.
7. Electrical and Electronics Engg.
Page 4 of 28
Sl.
No.
6. M.E. Advanced Manufacturing B.E. / B.Tech.
Technology 1. Mechanical Engg. /Mechanical Engg. (Sandwich)
2. Production Engg./Tech. /Production Engg. (Sandwich)
3. Automobile Engg.
5. Mining Engg.
7. Industrial Engg
8. Metallurgy
9. Materials Science and Engg
10. Computer Integrated Manufacturing
7. M.E. Cryogenic Engineering B.E. / B.Tech.
3. Production Engg./Tech./ Production Engg. (Sandwich)
4. Marine Engg.
5. Automobile Engg.
8. M.E. Computer Integrated Manufacturing B.E. / B.Tech.
2. Automobile Engg.
3. Production Engg./Tech/ Production Engg. (Sandwich)
5. Computer Integrated Manufacturing
7. Metallurgy
8. Industrial Engg.
9. Mechatronics /Mechatronics Engg
12. Metallurgical Engineering
9. M.E. Computer Aided Design B.E. / B.Tech.
2. Automobile Engg.
10. M.E.CAD/CAM 4. Production Engg./Tech./ Production Engg. (Sandwich)
5. Aerospace Tech.
6. Industrial Engg
7. Marine Engg.
8. Mechatronics / Mechatronics Engg
9. Aeronautical Engg
10. Aerospace Engg
Page 5 of 28
Sl.
No.
11. M.E. Engineering Design B.E. / B.Tech.
2. Automobile Engg. .
5. Industrial Engg
6. Mechatronics/Mechatronics Engg
7. Marine Engg
8. Aeronautical Engg
12. M.E. Energy Engineering B.E. / B.Tech.
1. Mechanical Engg./Mechanical Engg. (Sandwich)
2. Energy Engg.
3. Energy and Environmental Engg.
4. Mechanical and Energy Engg.
5. Chemical Engg.
13. M.E. Heat Power Engineering B.E. / B.Tech.
1. Mechanical Engg./Mechanical Engg. (Sandwich)
2. Automobile Engg.
14. M.E. Industrial Automation and B.E. / B.Tech.
Robotics 1. Automobile Engg.
15. M.E Robotics 3. Manufacturing Engg./Tech
6. Production Engg. / Tech./ Production Engg. (Sandwich)
8. Metallurgical Engg
16. M.E. Internal Combustion B.E. / B.Tech.
Engineering 1. Mechanical Engg./ Mechanical Engg. (Sandwich)
2. Automobile Engg.
4. Marine Engg
17. M.E. Industrial Safety Engineering B.E./B.Tech (All Branches)
Page 6 of 28
Sl.
No.
18. M.E. Industrial Metallurgy B.E. / B.Tech.
2. Production Engg./Tech. /Production Engg. (Sandwich)
3. Automobile Engg.
5. Metallurgy
6. Materials Science and Engg.
8. Metallurgical and Materials Engg
19. M.E. Industrial Engineering B.E. / B.Tech.
1. Industrial Engg.
4. Production Engg./ Tech./ Production Engg. (Sandwich)
5. Automobile Engg.
7. Industrial and Production Engg
8. Production and Industrial Engg
10. Industrial Engg and Management
20. M.E. Lean Manufacturing B.E. / B.Tech.
1. Mechanical Engg. / Mechanical Engg.(Sandwich).
3. Automobile Engg.
4. Aerospace Tech.
6. Industrial Engg.
21. M.E Mechatronics B.E. / B.Tech.
2. Automobile Engg.
4. Electronics Engg.
5. Aerospace Tech.
6. Computer Science and Engg.
8. Instrumentation and Control Engg.
9. Electronics and Instrumentation Engg.
13. Instrumentation Engg.
Page 7 of 28
Sl.
No.
22. M.E. Manufacturing Engineering B.E. / B.Tech.
2. Automobile Engg.
4. Industrial Engg.
5. Metallurgy
9. Rubber and Plastics Tech.
10. Polymer Engg /Tech.
23. M.E. Manufacturing Engineering (with B.E. / B.Tech.
specialisation in Green Manufacturing) 1. Aeronautical Engg.
2. Automobile Engg.
3. Civil Engg.
5. Industrial Engg.
6. Electrical and Electronics Engg
7. Chemical Engg.
8. Rubber and Plastic Tech.
10. Production Engg./Tech./Production Engg.(Sandwich)
13. Information Technology
24. M.E. Manufacturing Systems and B.E. / B.Tech.
Management 1. Mechanical Engg./ Mechanical Engg. (Sandwich)
3. Industrial Engg.
4. Printing Tech.
5. Automobile Engg.
6. Production Engg./Tech / Production Engg.(Sandwich)
7. Mechatronics /Mechatronics Engg
8. Metallurgy
9. Mining Engg
Page 8 of 28
Sl.
No.
25. M.E. Product Design and B.E. /B.Tech.
Development 1. Mechanical Engg./ Mechanical Engg (Sandwich)
2. Automobile Engg.
5. Industrial Engg.
26. M.E. Product Design and B.E. / B.Tech.
Commerce 1. Mechanical Engg./ Mechanical Engg. (Sandwich)
3. Automobile Engg.
5. Industrial Engg.
27. M.E. Printing and Packaging B.E. / B.Tech.
Technology 1. Printing Tech.
5. Chemical Engg / Tech.
6. Chemical and Electrochemical Engg
7. Polymer Engg. / Tech.
8. Plastic Tech.
10. Polymer Science and Engg.
11. Packaging Tech.
12. Printing and Media Engg.
13. Printing and Media Communication
14. Printing and Packaging Technology
16. Food /Pharmaceutical / Mechatronics/ Mechatronics
Engg./ Agricultural
28. M.Tech. Quality Engineering B.E./B.Tech (All Branches)
29. M.E. Quality Engineering and B.E./B.Tech (All Branches)
Management
Page 9 of 28
Sl.
No. P.G. Programmes Eligible Qualifications
30. M.E. Thermal Engineering (with B.E. / B.Tech.

Specilalisation in Refrigeration and Air – 1. Mechanical Engg./Mechanical Engg. (Sandwich)
Conditioning) 2. Automobile Engg.
3. Marine Engg.
4. Chemical Engg.
31. M.Tech. Renewable Energy B.E. / B.Tech.
1. Bio-Technology
2. Chemical Engg.
3. Industrial Bio-Technology
4. Electrochemical Engg.
6. Chemical & Electrochemical Engg.
8. Automobile Engineering
9. Manufacturing Engg./ Tech.
10. Production Engg./Tech./Production Engg.(Sandwich)
11. Industrial Engg.
32. M.E. Solar Energy B.E. / B.Tech.
2. Energy Engg.
3. Energy and Environmental Engg.
4. Mechanical and Energy Engg.
33. M.E. Thermal Engineering B.E. / B.Tech.
3. Automobile Engg.
5. Aerospace Tech.
7. Marine Engg.
8. Industrial Engg.
Page 10 of 28
Sl.
No.
34. M.E. Virtual Prototyping and B.E. / B.Tech.
Digital Manufacturing 1. Civil Engg.
4. Automobile Engg.
6. Industrial Engg.
7. Mechatronics/ Mechatronics Engg.
35. M.E. Welding Technology B.E. / B.Tech.
2. Production Engg./Tech./ Production Engg.(Sandwich)
3. Automobile Engg.
4. Metallurgy
6. Aerospace Tech.
7. Mechatronics / Mechatronics Engg
8. Marine Engg
9. Industrial Engg
10.Manufacturing Engg./Tech
11.Materials Science and Engg
12.Mechanical and Automation Engg
13.Robotics and Automation
14.Metallurgical Engineering
36. M. E. Mobility Engineering B.E. / B.Tech.

2. Automobile Engg.
3. Mechatronics/Mechatronics Engg
37. M.Tech. Robotics and Artificial Intelligence B.E. / B.Tech.
1. Mechanical Engineering
2. Mechatronics Engineering
4. Electronics and Communication Engineering
5. Electrical and Electronics Engineering
6. Electronics and Instrumentation Engineering
7. Instrumentation and Control Engineering
8. Computer Science and Engineering
Page 11 of 28
III. FACULTY OF ELECTRICAL ENGINEERING
Sl.
No.
1. M.E. Control Systems
B.E. / B.Tech.
2. M.E. Control and Instrumentation 1. Electrical and Electronics Engg.
Engineering 2. Electronics and Instrumentation Engg.
3. M.E. Electrical Drives and Embedded Control 4. Instrumentation Engg.
5. Electrical Engineering
4. M.E. Power Electronics and Drives
5. M.E. Electrical Machines B.E. / B.Tech.

6. M.E. High Voltage Engineering 2. Electrical Engineering
7. M.E. Power Systems Engineering
8. M.E. Power Engineering and Management
9. M.E. Embedded System Technologies B.E. / B.Tech.

10. M.E. Embedded and Real Time Systems 5. Electronics and Instrumentation Engg.
8. Instrumentation Engg.
11. M.E. Embedded Systems 9. Software Engg.
12. M.E. Instrumentation Engineering B.E. / B.Tech.
(Specialization in Industrial Automation) 1. Instrumentation Engg.
3. Instrumentation and Control Engg
5. Electronics and Communication Engg
6. Electronics Engg
7. Automation Engineering
8. Mechatronics Engineering
9. Automation and Robotics Engineering
10. Biomedical Instrumentation Engineering
11. Electrical and Computer Engineering
Page 12 of 28
IV. FACULTY OF INFORMATION AND COMMUNICATION ENGINEERING
Sl. P.G. Programmes Eligible Qualifications
No.
1. M.E. Computer Science and B.E. / B.Tech.
Engineering 1. Information Technology
2. M.E. Computer Science and
3. Software Engineering
Engineering (with Specialization in
4. Computer and Communication Engg.
Networks)
3. M.E. Computer Science and 6. Information Science and Engineering
Engineering (with Specialization in 7. Computer Science
Big Data Analytics) 8. Artificial Intelligence and Data Science
4. M.E. Computer Science and 9. Computer Science and Business Systems
Engineering (Artificial Intelligence and 10. Computer Science and Technology
Machine Learning) 11. Cyber Security
5. M.E. Computer Science and 12. Artificial Intelligence and Machine Learning
Engineering (Cyber Security) 13. Computer Science and Engineering (Artificial
6. M.E. Big Data Analytics Intelligence)
14. Computer Science and Engineering (Artificial
Intelligence and Machine Learning)
15. Computer Science and Engineering (Cyber Security)
7. M.Tech. Cyber Forensics and B.E. / B.Tech.

Information Security 1. Information Technology
6.Information Security and Digital Forensics
7. Artificial Intelligence and Data Science
8. Computer Science and Business Systems
9. Computer Science and Technology
10. Cyber Security
11. Artificial Intelligence and Machine Learning
Intelligence)
Page 13 of 28
No.
8. M.E. Computer Science and
Engineering (with Specialization in B.E. / B.Tech.
Operations Research) 1. Information Technology
9. M.E. Mobile and Pervasive Computing 3. Software Engineering
10. M.E. Software Engineering
11. M.E. Computer Science and 6. Artificial Intelligence and Data Science
Information Security 7. Computer Science and Business Systems
9. Cyber Security
Intelligence)
12. M.Tech. Information Technology B.E. / B.Tech.
13. M.E. Multimedia Technology
14. M.Tech. Information Technology (with 4. Computer and Communication Engg.
Specialization in Multimedia) 5. Electronics and Communication Engg
15. M.Tech. Information Technology
(Information and Cyber Warfare) 8. Computer Science and Technology
9. Cyber Security
Intelligence)
16. M.Tech. Web and Mobile B.E. / B.Tech.
Technology 1. Electrical and Electronics Engg.
10. Cyber Security
Intelligence)
Page 14 of 28
No.
17. M.Tech. Data Sciences B.E./B.Tech (All Branches)
(Full Stack Engineering) 1.Information Technology
2.Computer Science and Engineering
3.Electronics and Communication Engineering
4.Software Engineering
5. Computer and Communication Engineering.
9. Cyber Security
Intelligence)

(specialization in Artificial 1.Information Technology
Intelligence and Data Science) 2.Computer Science and Engineering
3.Electronics and Communication Engineering
4.Software Engineering
5. Computer and Communication Engineering.
9. Cyber Security
Intelligence)
Page 15 of 28
No.
20. M.E. E-Learning Technologies B.E. / B.Tech.

4. Computer & Communication Engineering
9. Cyber Security
Intelligence)
21. M.E. Artificial Intelligence and Data B.E. / B.Tech.

Science 1. Information Technology
6. Information Science and Engineering
7. Computer Science
Intelligence)
Page 16 of 28
IV. FACULTY OF ELECTRONICS AND COMMUNICATION ENGINEERING
No.
1. M.E. Applied Electronics B.E. / B.Tech.
3. Electronics Engineering
2. M.E. Avionics B.E. / B.Tech.
1. Avionics
2. Aeronautical Engineering
3. Aerospace Engineering/Technology
8. Instrumentation Engineering
3. M.E Biomedical Engineering B.E. / B.Tech.
1. Biomedical Engineering
2. Medical Electronics
4. Electronics and Instrumentation Engineering.
5. Bioengineering
6. Biomedical Instrumentation Engineering
4. M.E. Biometrics and Cyber Security B.E. / B.Tech.
1. Electrical and Electronics Engineering.
5. Computer Science and Engineering.
6. Electronics Engineering.
9. Software Engineering.
10. Electronics and Telecommunication
Engineering
5. M.E. Communication Engineering
B.E. / B.Tech.
1. Electronics and Engineering.
6. M.E. Electronics and Communication 2. Electronics Engineering.
Engineering
7. M.E. Optical Communication
8. M.E Communication and Networking
B.E/ B.Tech.
2. Computer and Communication Engineering
3. Electronics and Telecommunication Engineering
Page 17 of 28
No.
9. M.E. Communication Systems
B.E/ B.Tech.
10. M.E. Digital Signal processing B.E. / B.Tech.

1. Electronics and Communication Engineering.
11. M.Tech. Laser & Electro Optical B.E./ B.Tech.
Engineering 1. Electronics and Communication Engineering.
3. Electronics Engineering.
M.Sc.
7. Electronics
8. Physics
9. Material Science
10. Applied Physics
12. M.E. Medical Electronics B.E/ B.Tech.
4. Biomedical Instrumentation Engineering.
5. Medical Electronics
6. Bio Engineering
13. M.E. Space Science and Engineering B.E. / B.Tech.

3. Mechanical Engineering / Mechanical Engineering
(Sandwich)
5. Aerospace Engineering
6. Electronics and Instrumentation Engineering.
14. M.Tech. Satellite Technology B.E. / B.Tech.
3. Computer Science and Engineering.
6. Computer and Communication Engineering
Page 18 of 28
No.
15. M.E. VLSI Design B.E. / B.Tech.
16. M.E. VLSI Design and Embedded 1. Electronics and Communication Engineering
Systems 2. Electronics Engineering
4.Electrical and Electronics Engineering
B.E. / B.Tech.
17.
M.E. Wireless Communication 1. Electronics & Communication Engineering
3. Telecommunication Engineering
4. Electronics & Telecommunication Engineering
5. Electronics & Instrumentation Engineering.
6. Instrumentation & Control Systems Engineering
7. Electrical & Electronics Engineering
9. Computer Science & Engineering
18. M.E. Wireless Technologies B.E. / B.Tech.
19. M.E. Electronics and Communication B.E. / B. Tech.
Engineering (Industry Integrated) 1. Electronics and Communication Engineering
2. Electrical & Electronics Engineering
20. M.E. Wireless and Mobile B.E. / B.Tech.
Communications 1. Electronics and Communication Engineering.
21. M.E. Electronics and Communication B.E. / B. Tech.

(VLSI Design) 1. Electronics and Communication Engineering
22. M.E. Electronics and Communication B.E. / B.Tech.
(Advanced Communication 1. Electronics and Communication Engineering.
Technology) 2. Electronics and Telecommunication Engineering
23. M.E. Microwave and Optical B.E. / B. Tech.

Communication 1. Electronics and Communication Engineering
Page 19 of 28
V. FACULTY OF TECHNOLOGY
Sl.
No. P.G. Programmes Eligible Qualifications
1 M.Tech. Apparel Technology B.E. / B.Tech.
. 1. Textile Engg./Tech.
2. Textile Chemistry
3. Fashion Tech.
4. Leather Tech.
5. Apparel Tech.
6. Handloom and Textile Tech.
2 M.Tech. Bio-Technology B.E. / B.Tech.
. 1. Genetic Engg./Tech.
2. Bio-Chemical Engg./Tech.
3. Industrial Biotechnology
4. Bio-Technology
5. Agricultural Biotechnology
6. Pharmaceutical Technology
7. Biotechnology and Biochemical Engineering
3 M.Tech. Bio-Pharmaceutical B.E. / B.Tech.
. Technology 1. Biotechnology
2.Industrial Biotechnology
4 M.Tech. Pharmaceutical 3. Pharmaceutical Engg./Tech.
Biotechnology 4. Biochemical Engg./Tech.
5. Biotechnology and Biochemical Engineering
5. M.Tech. Chemical Engineering B.E. / B.Tech.
1.Chemical Engg.
2. Electro-Chemical Engg.
3.Pharmaceutical Engg./Tech.
4. Petroleum Engg./Tech.
5. Food Technology
6. Food Processing Engg./Tech.
7. Petrochemicals Engg./Tech.
8. Petroleum Refining & Petrochemicals Engg.
9. Chemical and Electrochemical Engg.
10. Industrial Bio-technology/ Bio-technology
11. Biochemical Engineering / Bio-technology & Biochemical
Engineering.
12. Polymer Tech./Engg.
13. Rubber & Plastics Technology
14. Rubber Technology
15. Petroleum Engineering and Technology
6. M.Tech. Environmental Science B.E. / B.Tech.
and Technology 1.Chemical Engg.
2.Industrial Biotechnology
3. Bio-Technology
6.Chemical & Electro Chemical Engg.
7. Petroleum Refining & Petro Chemicals Engg.
8. Bio-technology & Biochemical Engg.
9. Biochemical Engineering
10. Environmental Engineering / Environmental Planning
11. Mining Engineering
Page 20 of 28
Sl. No. P.G. Programmes Eligible Qualifications
7. M. Tech. Ceramic Technology B.E. / B.Tech.
1. Chemical Engineering.
2. Ceramic Engineering / Technology
3. Metallurgical and Materials Engineering
5. Metallurgical Engineering and Materials Science
6. Materials Engineering
7. Petroleum Engineering. / Technology
8. Petrochemical Engineering / Technology.
9. Petroleum Refining and Petrochemicals Engineering
10. Biotechnology
11. Ceramic and Cement Technology
12. Chemical and Electrochemical Engineering.
13. Nanotechnology
14. Nanoscience and Technology
15. Materials Science and Engineering.
16. Mechanical Engg.
17. Manufacturing Engg.
18. Production Engg.
M.Sc.
19. Physics
20. Applied Physics
21. Material Science
22. Nanotechnology
24. Nanosciences and Nanotechnology
8. M.Tech. Food Technology B.E. / B.Tech.
1. Food Technology
2. Agricultural Engg.
3. Dairy Technology
4. Food Processing Engg./Tech.
5. Fisheries Engineering
6. Food Safety and Management
7. Post Harvest Tech.
8. Food Science and Tech.
9. Food Processing and Preservation Technology
10. Agricultural and Food Engg.
9. M.Tech.Footwear B.E. / B.Tech.
Engineering and 1. Leather Tech.
Management 2. Mechanical Engg.
3. Industrial Engg.
4. Production Engg./Tech.
5. Manufacturing Engg
6. Biomedical Engg
7. Polymer Tech
B.E. / B.Tech./B.Des
(4 Years UG Programmes)
9. Footwear Technology / Engineering / Design
Page 21 of 28
10. M.Tech. Industrial Safety and B.E. / B.Tech.
Hazard Management 1. Chemical Engg.
2. Leather Tech.
3. Textile Engg./Tech.
4. Apparel Tech.
5. Ceramic Tech.
6. Bio-Technology / Industrial - Biotechnology
7. Environmental Engg. / Tech.
8. Rubber and Plastics Tech.
9. Polymer Tech.
10. Food Technology
11. Pharmaceutical Tech./ Engg.
12. Petroleum Refining and Petro Chemical Engg.
13. Nano Science and Tech.
14. Petroleum Engg. and Tech.
15. Mechanical Engg.
16. Industrial Engg.
17. Material Science and Engg.
20. Civil Engg.
21. Petrochemical Technology / Engg.
22. Safety and Fire Engineering
23. Mining Engineering
M.Sc. (Any branch of Chemistry)

11. M.Tech. Leather Technology B.E. / B.Tech.
1. Leather Technology
M. Sc.
3. Chemistry
4. Applied Chemistry
5. Environmental Chemistry
12. M.Tech. Petroleum Refining B.E. / B.Tech.
and Petro Chemicals 1. Chemical Engg.
2. Petroleum Refining & Petro Chemical Engg.
5. Petrochemical Engg./ Tech.
Page 22 of 28
13. M. Tech. Nano-Science and B.E. / B.Tech.
Technology 1. Mechanical Engg.
2. Ceramic Tech.
3. Engineering Physics
4. Biotechnology
6. Chemical Engg.
7. Biomedical Engg.
8. Agricultural Biotechnology
9. Bioinformatics
15. Nanotechnology
M.Sc. (with Mathematics as one of the subjects at B. Sc. level)
18. Physics
20. Chemistry
22. Bio Chemistry
23. Bio-Technology
B.Pharm.
14. M.Tech. Plastic Technology B.E. / B.Tech.
1. Mechanical Engg.
2. Chemical Engg.
4. Polymer Tech.
7. Petroleum Refining Engg.
11. Plastics Technology
12. Rubber Technology
13. Manufacturing Engineering
M.Sc.
14. Polymer Science
15. Chemistry with Polymer Specialisation
Page 23 of 28
15. M. Tech. Polymer Science and B.E / B.Tech.
Engineering 1. Chemical Engg.
2. Mechanical Engg
3. Manufacturing Engg.
4. Production Engg.
5. Polymer Engg / Tech.
6. Plastics Engg. / Tech.
7. Rubber & Plastics Tech.
8. Materials Science & Engg.
9. Nanotechnology
10. Printing Technology
12. Industrial Engineering
14. Material Science & Technology
15. Leather Technology
16. Textile Engg./ Tech.
17. Nano Science and Technology / Engineering
M.Sc. (2 years/Integrated 5 years)

18. General Chemistry
20. Polymer Chemistry
21. Analytical Chemistry
16. M.Tech. Rubber Tech.
B.E. / B.Tech.
1. Rubber and/or Plastic Tech.
2. Polymer Tech.
3. Mechanical Engg.
4. Chemical Engg.
6. Automobile Engg.
11. Petroleum Refining Engg.
M.Sc.
12. Chemistry
14. Polymer Chemistry
17. M.Tech. Textile Technology B.E. / B.Tech.
3. Apparel Technology
4. Fashion Technology
5. Handloom and Textile Technology
6. Fibres and Textile Processing Technology
Page 24 of 28
18. M.Tech. Textile Technology B.E. / B.Tech.
(with specialisation in Textile 1. Textile Chemistry
Chemistry) 2. Textile Technology
3. Polymer Technology
M.Sc.
7. Chemistry
19. M.Tech. Technology
B.E./B.Tech (All Branches)
Management
20. M. Tech. Computational Biology B.E. / B.Tech.
2. Biotechnology
3. Pharmaceutical Technology
4. Bioinformatics
5. Genetic Engineering / Technology
6. Computer science and Engineering
21. M.Tech. Technical Textile B.E./B.Tech.
1. Textile Technology
2. Textile Engineering
4. Apparel Technology
5. Fashion Technology
7. Fibres and Textile Processing Technology
Page 25 of 28
1. M.Tech. Defence Technology Faculty of Mechanical Engineering:

B.E. / B.Tech.
1. Mechanical Engineering /Mechanical
Engg.(Sandwich)
2. Manufacturing Engineering
3. Production Engineering Tech./Production
Engg.(Sandwich)
4. Automobile Engineering
6. Industrial Engineering
7. Mechatronics /Mechatronics Engg.
9. Marine Engineering / Technology
10. Mechanical and Automation Engineering
Faculty of Information and Communication

Engineering:
B.E. / B.Tech.
3. Computer and Communication
Engineering
4. Electronics and Communication
Engineering
5. Electronics and Telecommunication
Engineering
6. Computer Science and Engineering (With any
specialization)
Faculty of Electrical Engineering:
B.E. / B.Tech.
1. Electrical and Computer Engineering
3. Electrical and Instrumentation Engineering
4. Electrical and Power Engineering
6. Electrical, Electronics and Power Engineering
8. Electronics, Instrumentation and Control
Engineering
9. Electronics, Instruments and Control
Engineering
10. Instrumentation and Electronics
11. Power Electronics Engineering
12. Electronics and Control Systems
13. Electronics and Power Engineering
14. Instrument Technology
16. Power Electronics
17. Power Engineering
18. Power Electronics and Instrumentation
Engineering
Page 26 of 28
Other Programmes eligible as per AICTE Guidelines*
1. Aerospace Engineering
2. Applied Electronics and Communication
Engineering
3. Applied Electronics and Instrumentation
Engineering
4. Computer Engineering
5. Computer Engineering and Applications
6. Computer Networking
7. Computer Science and Information Technology
9. Computer Technology
11. Electronics, Science and Engineering
12. Electronics and Computer Science
13. Electronics and Computer Engineering
14. Electronics System Engineering
15. Metallurgical and Materials Engineering
16. Military Engineering
17. Optics and Opto-Electronics
18. Radio, Physics and Electronics
20. Structural Engineering
21. Telecommunication Engineering
* Chemical Engineering and Chemical Technology are not Eligible
Page 27 of 28
VI. FACULTY OF ARCHITECTURE & PLANNING
Sl. P.G. Programmes Eligible Qualification

No.
1. M. Arch.
2.
M. Arch. Digital Architecture
3. M. Arch. Environmental
Architecture
4. M. Arch. Landscape Architecture

1. B.Arch.
2. AIIA* (Associateship Examination of the Indian
5. M. Arch. Real Estate Development Institute of Architects) with a valid registration with
the Council of Architecture
6. M. Arch. Urban Design
7. M. Arch Conservation
1. B. Plan.
8. M. Plan. 2. B. Arch.
3. B.E. (Civil Engg.)
4. AIIA*
M.A. / M.Sc.
i) Geography
ii) Economics
iii) Sociology
iv) Social Work with Community development
specialisation and Rural Development
* Candidates who have qualified as AIIA (Asso ciateship Examination of th e In dian In stitute of
Architects) with a valid registration with the Council of Architecture are eligible.
Page 28 of 28
ANNEXURE II
LIST ANNEXURE –I
OF COMMUNITIES
LIST OF COMMUNITIES
SCHEDULED TRIBES IN TAMIL NADU 32. Palliyar

33. Paniyan
1. Adiyan 34. Sholaga
2. Aranadan 35. Toda( excluding Kanyakamari District
3. Eravallan and Shenlottah Taluk of Tirunelveli
4. Irular District)
5. Kadar 36. Uraly
6. Kammar (excluding Kanyakumari
District and Shenkottah Taluk of SCHEDULED CASTES IN TAMIL NADU
Tirunelveli District)
7. Kanikaran, Kanikkar (in Kanyakumari 1. Adi Dravida
District and Shenkottah Taluk of 2. Adi Karnataka
Tirunelveli District) 3. Ajila
8. Kaniyan, Kanyan 4. Ayyanavar (in Kanyakumari District and
9. Kattunayakan Shenkottah Taluk of Tirunelveli District)
10. Kochu Velan 5. Baira
11. Konda Kapus 6. Bakuda
12. Kondareddis 7. Bandi
13. Koraga 8. Bellara
14. Kota (excluding Kanyakumari District 9. Bharatar (in Kanyakumari District and
and Shenkottah Taluk of Tirunelveli Shenkottah Taluk of Tirunelveli District)
District) 10. Chalavadi
15. Kudiya, Melakudi 11. Chamar, Muchi
16. Kurichchan 12. Chandala
17. Kurumbas (in the Nilgiris District) 13. Cheruman
18. Kurumans 14. Devendrakula Velalar [Devendrakulathan,
19. Maha Malasar Kadaiyan(excluding in the coastal areas of
20. Malai Arayan Tirunelveli, Thoothukudi, Ramanathapuram,
21. Malai Pandaram pudukottai, Thanjavur, Tiruvarur and
22. Malai Vedan Nagapattinam districts), kalladi, Kudumban,
23. Malakkuravan Pallan, pannadi, Vathiriyan]
24. Malasar 15. Dom, Dombar, Paidi, Pano
25. Malayali (in Dharmapuri, North Arcot, 16. Domban
Pudukkottai, Salem, South Arcot and 17. Godagali
Tiruchirapalli Districts) 18. Godda
26. Malayakandi 19. Gosargi
27. Mannan 20. Holeya
28. Mudugar, Mudvan 21. Jaggali
29. Muthuvan 22. Jambuvulu
30. Pallayan 23. Kadaiyan (in the districts of Tirunelveli,
31. Palliyan Thoothukudi, Ramanathapuram, Pudukottai,
Thanjavur, Tiruvarur and Nagapattinam)
24. Kakkalan (in Kanyakumari District and 54. Sapari
Shenkottah Taluk of Tirunelveli District) 55. Semman
25. Kanakkan, Padanna (in the Nilgiris 56. Thandan (in Kanyakumari District and
District) Shenkottah Taluk of Tirunelveli District)
26. Karimpalan 57. Tiruvalluvar
27. Kavara (in Kanyakumari District and 58. Vallon
Shenkottah Taluk of Tirunelveli District) 59. Valluvan
28. Koliyan 60. Vannan (in Kanyakumari District and
29. Koosa Shenkottah Taluk of Tirunelveli District)
30. Kootan, Koodan (in Kanyakumari 61. Velan
District and Shenkottah Taluk of 62. Vetan (in Kanyakumari District and
Tirunelveli District) Shenkottah Taluk of Tirunelveli District)
31. Kuravan, Sidhanar 63. Vettiyan
32. Maila 64. Vettuvan (in Kanyakumari District and
33. Mala Shenkottah Taluk of Tirunelveli District)
34. Mannan (in Kanyakumari District and
Shenkottah Taluk of Tirunelveli District) SCHEDULED CASTES
35. Mavilan ARUNTHATHIYARS IN TAMIL NADU
36. Moger
1. AdiAndhra
37. Mundala
2. Arunthathiyar
38. Nalakeyava
3. Chakkiliyan
39. Nayadi
4. Madari
40. Padannan (in Kanyakumari District
5. Madiga
and Shenkottah Taluk of Tirunelveli
6. Pagadai
District)
7. Thoti
41. Palluvan
42. Pambada MOST BACKWARD CLASSES
43. Panan (in Kanyakumari District and & DENOTIFIED COMMUNITIES
Shenkottah Taluk of Tirunelveli District)
1. Ambalakarar
44. Panchama
45. Panniandi 2. Arayar (in Kanniyakumari District)
46. Paraiyan, Parayan,Sambavar 3. Bestha, Siviar
47. Paravan (in Kanyakumari District 4. Bhatraju (other than Kshatriya Raju)
and Shenkottah Taluk of 5. Boyar, Oddar
6. Dasari
Tirunelveli District)
48. Pathiyan (in Kanyakumari District 7. Dommara
and Shenkottah Taluk of Tirunelveli 8. Jambuvanodai
9. Jogi
District)
10. Koracha
49. Pulayan,Cheramar
50. PuthiraiVannan 11. Latin Catholic Christian Vannar (in
51. Raneyar Kanniyakumari District)
52. Samagara 12. Mond Golla
13. Mutlakampatti
53. Samban
28. Attur Melnad Koravars (Salem and
14. Nokkar
15. Paravar (except in Namakkal Districts)
Kanniyakumari District and 29. Appanad Kondayam kottai Maravar
Shencottah Taluk of Tenkasi (Sivaganga, Virudhunagar,
District where the Community is Ramanathapuram, Madurai, Theni and
a Scheduled Caste) Dindigul Districts)
16. Paravar converts to 30. Ambalakarar (Thanjavur, Nagapattinam,
Christianity including the Mayiladuthurai, Tiruvarur, Tiruchirapalli,
Paravar converts to Karur, Perambalur, Ariyalur and
Christianity of Kanniyakumari Pudukottai Districts)
District and Shencottah Taluk 31. Ambalakkarar (Suriyanur, Tiruchirapalli
of Tenkasi District. District)
17. Meenavar (Parvatharajakulam, 32. Boyas (Tiruchirapalli, Karur, Perambalur,
Pattanavar, Sembadavar) Ariyalur, Pudukottai, The Nilgiris, Salem,
(including converts to Namakkal, Dharmapuri and Krishnagiri
Christianity). Districts)
18. Mukkuvar or Mukayar
33. Battu Turkas
(including converts to
34. C.K. Koravars (Cuddalore, Villupuram
Christianity)
and Kallakurichi Districts)
19. Punnan Vettuva Gounder
20. Telugupatty Chetty 35. Chakkala (Sivaganga, Virudhunagar,
21. Thottia Naicker (including Ramanathapuram, Thanjavur,
Rajakambalam, Gollavar, Sillavar, Nagapattinam, Mayiladuthurai, Tiruvarur,
Thockalavar, Thozhuva Naicker Pudukottai, Tiruchirapalli, Karur,
and Erragollar) Perambalur, Ariyalur, Madurai, Theni,
Dindigul and The Nilgiris Districts)
22. Vanniakula Kshatriya(including
Vanniyar, Vanniya, Vannia 36. Changyampudi Koravars (Tirupattur,
Gounder, Gounder or Kander, Ranipet, Vellore and Tiruvannamalai
Padayachi, Palli and Agnikula Districts)
Kshatriya) 37. Chettinad Valayars (Sivaganga,
23. Valaiyar (including Virudhunagar and Ramanathapuram
Chettinad Valayars) Districts)
24. Vannar (Salavai Thozhilalar) 38. Dombs (Pudukottai,Tiruchirapalli, Karur,
(including Agasa, Madivala, Ekali, Perambalur and Ariyalur Districts)
Rajakula, Veluthadar and Rajaka) 39. Dobba Koravars (Salem and Namakkal
(except in Kanniyakumari Districts)
District and Shencottah Taluk of 40. Dommars(Thanjavur, Nagapattinam,
Tenkasi District where the Mayiladuthurai, Tiruvarur, Pudukottai,
community is a Scheduled Caste) Tirupattur, Ranipet, Vellore and
25. Vettaikarar Tiruvannamalai Districts)
26. Vettuva Gounder
27. Attur Kilnad Koravars (Salem, 41. Donga Boya
Namakkal, Cuddalore,Villupuram, 42. Donga Ur.Korachas
Kallakurichi,Ramanathapuram, 43. Devagudi Talayaris
Sivaganga and Virudhunagar
Districts)
Tenkasi, Thoothukudi, Salem and
44. Dobbai Korachas (Tiruchirapalli, Karur,
Namakkal Districts)
Perambalur, Ariyalur and Pudukottai Districts)
56. Koravars (Chengalpattu, Kancheepuram,
45. Dabi Koravars (Thanjavur, Nagapattinam,
Mayiladuthurai, Tiruvarur, Tiruchirapalli, Tiruvallur, Ramanathapuram, Sivaganga,
Karur, Perambalur, Ariyalur, Virudhunagar, Pudukottai, Thanjavur,
Pudukottai,Tirupattur, Ranipet,Vellore and Nagapattinam, Mayiladuthurai,
Tiruvannamalai Districts)
Thiruvarur, Tiruchirapalli, Karur,
46. Donga Dasaris (Chengalpattu,
Kancheepuram, Tiruvallur, Tiruchirapalli, Perambalur, Ariyalur, Tirunelveli,
Karur, Perambalur, Ariyalur, Pudukottai, Tenkasi, Thoothukudi, Chennai, Madurai,
Chennai, Salem and Namakkal Districts)
Theni, Dindigul and The Nilgiris
47. Gorrela Dodda Boya
Districts)
48. Gudu Dasaris
57. Kalinji Dabikoravars (Thanjavur,
49. Gandarvakottai Koravars (Thanjavur,
Nagapattinam, Mayiladuthurai, Tiruvarur, Nagapattinam, Mayiladuthurai, Tiruvarur
Tiruchirapalli, Karur, Perambalur, Ariyalur, and Pudukottai Districts )
Pudukottai, Cuddalore, Villupuram and
58. Kootappal Kallars (Tiruchirapalli, Karur,
Kallakurichi Districts)
Perambalur, Ariyalur and Pudukottai
50. Gandarvakottai Kallars (Thanjavur,
Nagapattinam, Mayiladuthurai, Tiruvarur and Districts)
Pudukottai Districts) 59. Kala Koravars (Thanjavur, Nagapattinam,
51. Inji Koravars (Thanjavur, Mayiladuthurai, Tiruvarur, Tiruchirapalli,
Nagapattinam,Mayiladuthurai,
Tiruvarur,Pudukottai,Tiruchirapalli, Karur, Perambalur, Ariyalur and
Karur,Perambalur and Ariyalur district.) Pudukottai Districts)
52. Jambavanodai 60. Kalavathila Boya
53. Kaladis (Sivaganga, Virudhunagar, 61. Kepmaris(Chengalpattu, Kancheepuram ,
Ramanathapuram,Madurai, Theni,
Tiruvallur, Pudukottai, Tiruchirapalli,
Dindigul,Thanjavur,Nagapattinam,
Perambalur,Ariyalur,Mayiladuthurai Karur, Perambalur and Ariyalur Districts)
Thiruvarur,Tiruchirapalli,Karur, Pudukkotai 62. Maravars (Thanjavur, Nagapattinam,
district) Mayiladuthurai, Tiruvarur, Pudukottai,
54. Jogis (Chengalpattu, Kancheepuram, Ramanathapuram, Sivaganga,
Tiruvallur, Chennai, Cuddalore, Virudhunagar, Tirunelveli, Tenkasi and
Villupuram, Kallakurichi, Tirupattur, Thoothukudi Districts)
Ranipet, Vellore and Tiruvannamalai 63. Monda Koravars
Districts) 64. Monda Golla (Salem and
55. Kal Oddars (Chengalpattu, Namakkal Districts)
Kancheepuram, Tiruvallur, 65. Mutlakampatti (Tiruchirapalli,
Ramanathapuram,Sivaganga, Karur, Perambalur, Ariyalur and
Virudhunagar, Madurai, Theni, Pudukottai Districts)
Dindigul, Pudukottai, Thanjavur, 66. Nokkars (Tiruchirapalli, Karur,
Nagapattinam,Mayiladuthurai, Perambalur, Ariyalur and Pudukottai
Tiruvarur, Tiruchirapalli, Karur, Districts)
Perambalur, Ariyalur, Tirunelveli,
67. Nellorepet Oddars (Tirupattur, Ranipet, 81. Sembanad Maravars (Sivaganga,
Vellore and Tiruvannamalai Districts) Virudunagar and Ramanathapuram
68. Oddars (Thanjavur, Nagapattinam, Districts)
Mayiladuthurai, Tiruvarur, Tiruchirapalli, 82. Thalli Koravars (Salem and Namakkal
Karur, Perambalur, Ariyalur, Pudukottai, Districts)
Madurai, Theni and Dindigul Districts) 83. Telungapattti Chettis (Tiruchirapalli, Karur,
69. Pedda Boyas (Tiruchirapalli, Karur, Perambalur, Ariyalur and Pudukottai
Perambalur, Ariyalur and Pudukottai Districts)
Districts) 84. Thottia Naickers (Sivaganga, Virudunagar ,
70. Ponnai Koravars (Tirupattur, Ranipet, Ramanathapuram, Chengalpattu,
Vellore and Tiruvannamalai Districts) Kancheepuram, Tiruvallur, Thanjavur,
71. Piramalai Kallars Nagapattinam, Mayiladuthurai,
(Sivaganga, Virudhunagar, Tiruvarur, Tiruchirapalli, Karur,
Ramanathapuram, Madurai, Perambalur, Ariyalur, Pudukottai,
Theni, Dindigul, Tirunelveli, Tenkasi, Thoothukudi, Salem,
Pudukottai, Namakkal, Tirupattur, Ranipet, Vellore,
Thanjavur, Nagapattinam, Tiruvannamalai, Coimbatore, Tiruppur and
Mayiladuthurai and Tiruvarur Districts) Erode Districts)
72. Peria Suriyur Kallars (Tiruchirapalli, 85. Thogamalai Koravars or Kepmaris
Karur, Perambalur, Ariyalur and (Tiruchirapalli, Karur, Perambalur, Ariyalur
Pudukottai Districts) and Pudukottai Districts)
73. Padayachi (Vellayan Kuppam in 86. Uppukoravars or Settipalli
Cuddalore District and Tennore in Koravars (Thanjavur, Nagapattinam,
Tiruchirapalli District) Mayiladuthurai, Tiruvarur, Pudukottai,
74. Punnan Vettuva Gounder (Tiruchirapalli, Madurai, Theni, Dindigul, Tirupattur,
Karur, Perambalur, Ariyalur and Ranipet, Vellore and Tiruvannamalai
Pudukottai Districts) Districts)
75. Servai (Tiruchirapalli, Karur, 87. Urali Gounders (Tiruchirapalli,
Perambalur, Ariyalur and Pudukottai Karur, Perambalur, Ariyalur and
Districts) Pudukottai Districts)
76. Salem Melnad Koravars (Madurai, Theni, 88. Wayalpad or Nawalpeta Korachas
Dindigul, Coimbatore, Tiruppur, Erode, 89. Vaduvarpatti Koravars (Madurai, Theni,
Pudukottai, Tiruchirapalli, Karur, Dindigul, Ramanathapuram, Sivaganga,
Perambalur, Ariyalur, Salem, Namakkal, Virudunagar, Tirunelveli, Tenkasi,
Tirupattur, Ranipet, Vellore and Thoothukudi, Tiruchirapalli, Karur,
Tiruvannamalai Districts) Perambalur, Ariyalur and Pudukottai
77. Salem Uppu Koravars (Salem and Namakkal Districts)
Districts) 90. Valayars (Madurai, Theni, Dindigul,
78. Sakkaraithamadai Koravars (Tirupattur, Tiruchirapalli, Karur, Perambalur,
Ranipet, Vellore and Tiruvannamalai Ariyalur, Pudukottai, Erode, Coimbatore
Districts) and Tiruppur Districts)
79. Saranga Palli Koravars 91. Vettaikarar (Thanjavur, Nagapattinam,
80. Sooramari Oddars (Salem and Namakkal Mayiladuthurai, Tiruvarur and Pudukottai
Districts) Districts)
92. Vetta Koravars (Salem and LIST OF BACKWARD CLASSES
1. Agamudayar including Thozhu or Thuluva
Namakkal Districts)
Vellala
93. Varaganeri Koravars
(Tiruchirapalli, Karur, 2. Agaram Vellan Chettiar
3. Alwar, Azhavar and Alavar (in
Perambalur, Ariyalur and
Pudukottai Districts) Kanniyakumari District and Shencottah
94. Vettuva Gounder (Tiruchirapalli, Karur, Taluk of Tirunelveli District.)
4. Servai(except Tiruchirapalli, Karur,
Perambalur, Ariyalur and Pudukottai
Perambalur and PudukottaiDistricts.)
Districts)
5. Nulayar(in Kanniyakumari District and
95. Andipandaram
Shencottah Taluk ofTirunelveli District)
96. Eravallar (except in
6. Archakarai Vellala
Kanniyakumari District and
7. Aryavathi(in Kanniyakumari District and
Shencottah Taluk of Tenkasi
Shencottah Taluk ofTirunelveli District)
District where the community is a
8. Ayira Vaisyar
Scheduled Tribe)
9. Badagar
97. Isaivellalar
10. Billava
98. Jangam
11. Bondil
99. Kongu Chettiar (in Coimbatore,
12. Boyas (except Tiruchirapalli, Karur,
Tiruppur and Erode Districts
Perambalur, Pudukottai, The Nilgiris,
only)
Salem , Namakkal Dharmapuriand
100. Kulala (including Kuyavar
Krishnagiri Districts).
and Kumbarar)
13. Pedda Boyar (except Tiruchirapalli, Karur
101. Kunnuvar Mannadi
, Perambalur andPudukottai Districts)
102. Kurumba, Kurumba Gounder
Oddars (except Thanjavur,
103. Kuruhini Chetty
Nagapattinam, Tiruvarur, Tiruchirapalli,
104. Maruthuvar, Navithar, Mangala,
Karur, Perambalur, Pudukottai, Madurai,
Velakattalavar, Velakatalanair and
Pronopakari. Theni and Dindigul Districts)
105. Moundadan Chetty Kaloddars (except Kancheepuram,
106. Mahendra, Medara Tiruvallur, Ramanathapuram, Sivaganga,
107. Narikoravar (Kuruvikars) Viruthunagar, Madurai, Theni, Dindigul,
108. Panisaivan/Panisivan Pudukkottai,Tiruchirappalli, Karur,
109. Pannayar (other than Kathikarar in Perambalur, Tirunelveli, Thoothukudi,
Kanniyakumari District) Salem and Namakkal Districts)
110. Sathatha Srivaishnava (including Nellorepet oddars (except Vellore and
Sathani, Chattadi and Chattada Tiruvannamalai Districts)Sooramari
Srivaishnava) oddars( except Salem and Namakkal
111. Sozhia Chetty Districts)
112. Thondaman 14. Chakkala (except Sivaganga,
113. Thoraiyar (Nilgiris) Virudhunagar, Ramanathapuram,
114. Thoraiyar (Plains) Thanjavur ,Nagapattinam,Tiruvarur,
115. Transgender/Eunuch (Thirunangai /
Pudukottai, Tiruchirapalli, Karur,
Aravani)
116. Yogeeswarar Perambalur, Madurai, Theni, Dindigul
and the Nilgiris Districts)
15. Chavalakarar (in Kanniyakumari District 34. Jhetty
and Shencottah Taluk ofTirunelveli 35. Jogis (Except Kancheepuram, Tiruvallur,
District) Madurai, Theni, Dindigul, Cuddalore,
16. Chettu or Chetty (including Kottar Chetty, Villupuram, Vellore and Tiruvannamalai
Elur Chetty, PathiraChetty, Valayal Districts)
Chetty,Pudukadai Chetty ) ( in 36. Kabbera
KanniyakumariDistrict and Shencottah 37. Kaikolar, Sengunthar
Taluk of Tirunelveli District) 38. Kaladi (except Sivaganga, Virudhunagar,
17. Chowdry Ramanathapuram, Madurai, Theni,
18. Converts to Christianity from Scheduled Dindigul,Thanjavur,
Castes irrespective of the generation of Nagapattinam,Tiruvarur,Pudukottai,
conversion for the purpose of reservation Tiruchirapalli, Karur and Perambalur Districts)
of seats in Educational Institutions and for 39. Kalari Kurup including Kalari Panicker (in
seats in Public Services. Kanniyakumari District and Shencottah Taluk of
19. C.S.I formerly S.I.U.C (in Kanniyakumari Tirunelveli District)
District and 40. Kalingi
ShencottahTaluk of Tirunelveli District) 41. Kallar, Easanattu Kallar Gandharva Kottai
20. Donga Dasaris ( except Kancheepuram, Kallars(except Thanjavur,
Tiruvallur, Trichirapalli,Karur, Nagapattinam,Tiruvarur and Pudukottai Districts)
Parambalur, Pudukottai, Chennai, Salem 42. Kootappal Kallars-(except Pudukottai,
and Namakkal Districts. Tiruchirapalli, Karur and Perambalur Districts)
21. Devangar, Sedar 43. Piramalai Kallars- (except
22. Dombs (except Pudukottai, Tiruchirapalli Sivaganga,Virudhunagar, Ramanathapuram.
,Karur and Perambalur Districts) Madurai, Theni, Dindigul, Pudukottai, Thanjavur,
Dommars (except Thanjavur, Nagapattinam and Tiruvarur Districts)
Nagapattinam,Tiruvarur, 44. Periyasooriyur Kallars- (except Tiruchirapalli,
Pudukottai,Vellore and Thiruvannamalai Karur, Perambalurand Pudukottai Districts)
Districts) 45. Kallar Kula Thondaman
23. Enadi 46. Kalveli Gounder
24. Ezhavathy(in Kanniyakumari District and 47. Kambar
Shencottah Taluk ofTirunelveli District) 48. Kammalar or Viswakarma , Viswakarmala
25. Ezhuthachar (in Kanniyakumari District (including Thattar, Porkollar, Kannar, Karumar,
and Shencottah Taluk ofTirunelveli Kollar, Thacher, Kal Thacher, Kamsala and Viswa
District) brahmin.)
26. Ezhuva(in Kanniyakumari District and 49. Kani, Kanisu, Kaniyar Panicker
Shencottah Taluk ofTirunelveli District) 50. Kaniyala Vellalar
27. Gangavar 51. Kannada Saineegar ,Kannadiyar (Throughout the
28. Gavara, Gavarai and Vadugar (Vaduvar) State) and Dasapalanjika (Coimbatore, Erode and
(other than Kamma,Kapu, Balija and the Nilgiris Districts)
Reddi) 52. Kannadiya Naidu
29. Gounder 53. Karpoora Chettiar
30. Gowda (including Gammala, Kalali and 54. Karuneegar (Seer Karuneegar, Sri Karuneegar,
Anuppa Gounder) Sarattu Karuneegar, Kaikatti Karuneegar,
31. Hegde Mathuvazhi Kanakkar, SozhiKanakkar, and
32. Idiga Sunnambu Karuneegar)
33. IllathuPillaimar, Illuvar, Ezhuvar 55. Kasukkara Chettiar
andIllathar 56. Katesar, Pattamkatti
57. Kavuthiyar 80. Karumaravars
58. Kerala Mudali Appanad Kondayam kottai Maravar – (except
59. Kharvi Sivaganga, Virudhunagar, Ramanathapuram,
60. Khatri Madurai, Theni and Dindigul Districts.)
61. Kongu Vaishnava 81. Sembanad Maravars- (except Sivaganga,
62. Kongu Vellalars( including Vellala Virudhunagar, and Ramanathapuram Districts)
Gounder, Nattu Gounder, Narambukkatti 82. Moondrumandai Enbathunalu (84) Ur. Sozhia
Gounder, Tirumudi Vellalar, Thondu Vellalar
Vellalar, Pala Gounder, Poosari Gounder, 83. Mooppan
Anuppa Vellala Gounder, Padaithalai 84. Muthuraja, Muthuracha, Muttiriyar, Mutharaiyar
Gounder, Chendalai Gounder, 85. Nadar, Shanar and Gramani
Pavalankatti Vellala Gounder, Palavellala 86. Nagaram
Gounder, Sanku Vellala Gounder and 87. Naikkar (in Kanniyakumari District and
Rathinagiri Gounder). Shencottah Taluk of Tirunelveli District)
63. KoppalaVelama 88. Nangudi Vellalar
64. Koteyar 89. Nanjil Mudali ( in Kanniyakumari District and
65. Krishnanvaka (in Kanniyakumari District Shencottah Taluk of Tirunelveli District)
and Shencottah Taluk ofTirunelveli 90. Nellorepet Oddars (Except Vellore and
District) Tiruvannamalai Districts.)
66. Kudikara Vellalar 91. Odar ( in Kanniyakumari District and Shencottah
67. Kudumbi ( in Kanniyakumari District and Taluk of Tirunelvi District.
Shencottah Taluk of Tirunelveli District) 92. Odiya
68. Kaloddars (Except 93. Oottruvalanattu Vellalar
Kancheepuram,Tiruvallur, 94. O.P.S. Vellalar
Ramathapuram, Sivaganga, 95. Ovachar
Viruthunagar, Madurai, Theni, Dindigul, 96. Paiyur Kotta Vellalar
Pudukkottai,Tiruchirappalli, Karur, 97. Pamulu
Perambalur, Tirunelveli,Thoothukudi, 98. Panar ( except in Kanniyakumari District and
Salem and Namakkal Districts) Shencottah Taluk of Tirunelveli District where
69. Kuga Vellalar the community is a Scheduled Caste )
70. Kunchidigar 99. Pandiya Vellalar
71. Latin Catholics except Latin Catholic 100. Kathikarar in Kanniyakumari District
Vannar in Kanniyakumari District. 101. Pannirandam Chettiar or Uthama Chettiar
72. Lathin Catholics in Shencottah Taluk of 102. Parkavakulam ( including Surithimar, Nathamar,
Tirunelveli District Malayamar,Moopanar and Nainar )
73. Lambadi 103. Perike ( including Perike Balija )
74. Lingayat (Jangama) 104. Perumkollar ( in Kanniyakumari District and
75. Mahratta (Non-Brahmin) (including Shencottah Taluk ofTirunelveli District )
Namdev Mahratta) 105. Podikara Vellalar
76. Malayar 106. Pooluva Gounder
77. Male 107. Poraya
78. Maniagar 108. Pulavar ( in Coimbatore and Erode Districts )
79. Maravars (except Thanjavur, 109. Pulluvar or Pooluvar
Nagapattinum , Tiruvarur, Pudukottai, 110. Pusala
Ramanathapuram, Sivaganga, 111. Reddy ( Ganjam )
Virudhunagar, Tirunelveli and 112. Sadhu Chetty ( including Telugu Chetty, Twenty
Thoothukudi Districts) four Manai Telugu Chetty)
113. Sakkaravar or Kavathi ( in and Shencottah Taluk of Tirunelveli District )
Kanniyakumari District and Shencottah 139. Velar
Taluk of Tirunelveli District ) 140. Vellan Chettiar
114. Salivagana 141. Veluthodathu Nair ( in Kanniyakumari District
115. Saliyar, Padmasaliyar, Pattusaliyar, and ShencottahTaluk of Tirunelveli District )
Pattariyar, and Adhaviyar 142. Vokkaligar ( including Vakkaligar, Okkaligar,
116. Savalakkarar Kappiliyar, Kappiliya, Okkaliga Gowda,
117. Senaithalaivar, Senaikudiyar and Okkaliya- Gowda, Okkaliya- Gowder, Okkaliya
Illaivaniar Gowda )
118. Serakula Vellalar 143. Wynad Chetty ( The Nilgiris District )
119. Sourashtra ( Patnulkarar ) 144. Yadhava ( including Idaiyar, Telugu Speaking
120. Sozhiavellalar ( including Sozha Vellalar, Idaiyar known asVaduga Ayar or Vaduga Idaiyar
Vetrilaikarar, Kodikalkarar and or Golla and Asthanthra Golla)
Keeraikarar ) 145. Yavana
121. Srisayar 146. Yerukula
122. Sundaram Chetty 147. Converts to Christianity from any Hindu
123. Thogatta Veerakshatriya Backward Classes Community or Most
124. Sooramari Oddars (Except Salem and Backward Classes Community or Denotified
Namakkal District.) Communities (except the Converts to Christianity
125. Tholkollar ( in Kanniyakumari District from Meenavar, Parvatharajakulam, Pattanavar,
and Shencottah Taluk ofTirunelveli Sembadavar, Mukkuvar or Mukayar and Paravar)
District ) 148. Orphans and destitute children who have lost their
126. Tholuva Naicker and Vetalakara Naicker parents beforereaching the age of ten and are
127. Thoraiyar destitutes; and who have nobody else to take care
128. Thoriyar of them either by law or custom; and also who are
129. Ukkirakula Kshatriya Naicker admitted into any of the schools or orphanages run
130. Uppara, Uppillia and Sagara by the Government or recognized by the
Urali Gounder ( except Tiruchirapalli, Government
Karur, Perambalur and Pudukottai 149. Thiyya
District) and Orudaya Gounder or
Oorudaya Gounder ( in Madurai Theni, LIST OF BACKWARD CLASS MUSLIMS
Dindigul, Coimbatore, Erode,
Tiruchirapalli, Karur , Perambalur, 1. Ansar
Pudukottai, Salem and Namakkal 2. Dekkani Muslims
Districts) 3. Dudekula
131. Urikkara Nayakkar 4. Labbais including Rowthar and Marakayar
132. Virakodi Vellala (Whether their spoken language is Tamil or
133. Vallambar Urdu)
134. Vallanattu Chettiar 5. Mapilla
135. Valmiki 6. Sheik
136. Vaniyar, Vania Chettiar ( including 7. Syed
Gandla, Ganika, Telikula and Chekkalar)
137. Veduvar and Vedar ( except in
Kanniyakumari District and Shencottah
Taluk of Tirunelveli District where the
community is a Scheduled Castes)
138. Veerasaiva ( in Kanniyakumari District
ANNEXURE
ANNEXURE III III
DIFFERENT LY ABLED PERSONS CATEGORY
Candidates seeking admission against reservation set apart for Visually Impaired, Hearing impaired (Deaf), orthopaedically Di fferently Abled Persons,
Autism, Multiple disabilities should produce the certificate from the Medical Board (minimum 3 doctors) of the District concerned certifying the
nature and extent of disability in percentage and with regard to his/her suitability for admission to the Programme in the format
(Certificate No. I/II/III/IV/V). Certificates obtained from an individual Doctor will not be considered. Further, a separate medical Board for
each category will examine the candidates with reference to their certificates.
Eligibility criteria for various disabilities
A. Norms for Visual Impairment
Candidates with low vision of 40 % and above are considered as disabled, and hence eligible for claiming Engineering Admissio n
against Differently Abled Persons category (Certificate No. II).
1. "Blindness" means a condition where a person has any of the following conditions, after best correction—
(i) total absence of sight; or
(ii) visual acuity less than 3/60 or less than 10/200 (Snellen) in the better eye with best possible correction; or
(ii) limitation of the field of vision subtending an angle of less than 10 degree.
2. "Low-vision" means a condition where a person has any of the following conditions, namely:—
(i) visual acuity not exceeding 6/18 or less than 20/60 up to 3/60 or up to 10/200 (Snellen) in the better eye with
best possible corrections; or
(ii) limitation of the field of vision subtending an angle of less than 40 degree up to 10 degree.
Person with impairment of vision of less than 6/18 to 6/60 with best correction in the better eye or impairment of field in any
one of the following categories:
(a) Reduction of fields less than 50 degrees, (b) Heminaopia with macular involvement, and (c) Attitudinal defect involving
lower fields categories of Visual Disability all with correction.
Category Better eye Worse eye Impairment

Category O 6/9 – 6/18 6/24 to 6/36 20 %
Category I 6/16 – 6/36 6/20 to Nil 40 %
Category II 6/40 – 4/60 or field of vision 10º - 20º 3/60 to Nil 75 %
Category III 3/60 to 1/60 or field of vision 10º F.C at 1 ft. to Nil 100 %
Category IV F.C at 1 ft. to Nil or field of vision 10º F.C at 1 ft. to Nil 100 %
One eyed persons * 6/6 F.C at 1 ft. to Nil or field of vision 10º 30 %
Note: F.C. means Finger Count
* ONE EYED persons with normal vision are not considered as disabled.
B. Norms for Hearing Impairment
Candidates with hearing ability of 40 db and above only in the better ear with speech discrimination score of 50 % and above are
considered disabled and hence eligible for claiming Engineering Admissions against Differently Abled Persons category (Certificate No.
III).
1. "Deaf" means persons having 70 DB hearing loss in speech frequencies in bothears.
2. "Hard of hearing" means person having 60 DB to 70 DB hearing loss in speech frequencies in both ears.
C. Norms for Locomotor Disability
Candidates with permanent physical impairment of 40 % and above are considered as disabled. The candidates with Locomotor disability
including cerebral palsy, leprosy cured, dwarfism, acid attack victims and muscular dystrophy of the following typ es are eligible for claiming
Engineering Admission against Differently Abled Persons category (Certificate No. IV).
1. Locomotor disability (a person's inability to execute distinctive activities associated with movement of self and objects resulting
from affliction of musculoskeletal or nervous system or both).
(i) Independent in ambulance with or without calipers but without walking aids. (ii) Good Standing Balance without calipers but
without any support. (iii) Hand Function with normal limit without any aid. (iv) Good control over bladder & bowel. (v) Disea se must be
non progressive.
2. “Leprosy cured person" means a person who has been cured of leprosy but is suffering from—
(i) loss of sensation in hands or feet as well as loss of sensation and paresis in the eye and eye-lid but with no manifest
deformity;
(ii) manifest deformity and paresis but having sufficient mobility in their hands and feet to enable them to engage in
normaleconomic activity;
(iii) extreme physical deformity as well as advanced age which prevents him/her from undertaking any gainful occupation,
andthe expression "leprosy cured" shall be construed accordingly;
3. "Cerebral palsy" means a Group of non-progressive neurological condition affecting body movements and muscle
coordination, caused by damage to one or more specific areas of the brain, usually occurring before, during or shortly after
birth;
4. "Dwarfism" means a medical or genetic condition resulting in an adult height of 4 feet 10 inches (147 centimeters) or less;
5. "Muscular dystrophy" means a group of hereditary genetic muscle disease that weakens the muscles that move the human body
and persons with multiple dystrophy have incorrect and missing information in their genes, which prevents them from making the
proteins they need for healthy muscles. It is characterised by progressive skeletal muscle weakness, defects in muscle proteins,
andthe death of muscle cells and tissue;
6. "Acid attack victims" means a person disfigured due to violent assaults by throwing of acid or similar corrosive substance.
D. Norms for Autism, Intellectual Disability, Specific Learning Disability and Mental Illness
Candidates with permanent physical impairment of 40 % and above are considered as disabled. The candidates with Autism, Intellectual
Disability, Specific Learning Disability and Mental Illness of the following types are eligible for claiming Eng ineerin g Admission against
Differently Abled Persons category (Certificate No. V).
1. "Speech and language disability" means a permanent disability arising out of conditions such as laryngectomy or aphasia affecting
one or more components of speech and language due to organic or neurological causes.
2. Intellectual disability, a condition characterized by significant limitation both in intellectual functioning (reasoning, learning,
problem solving) and in adaptive behaviour which covers a range of every day, social and practical skills, including—
(i) "specific learning disabilities" means a heterogeneous group of conditions wherein there is a deficit in processing language,
spoken or written, that may manifest itself as a difficulty to comprehend, speak, read, write, spell, or to do mathematical calculations
and includes such conditions as perceptual disabilities, dyslexia, dysgraphia, dyscalculia, dysprax ia and developmental aphasia;
(ii) "autism spectrum disorder" means a neuro-developmental condition typically appearing in the first three years of life
that significantly affects a person's ability to communicate, understand relationships and relate to others, and is frequentl y associated
with unusual or stereotypical rituals or behaviours.
3. Mental behaviour — "mental illness" means a substantial disorder of thinking, mood, perception, orientation or memory
that grossly impairs judgment, behaviour, capacity to recognize reality or ability to meet the ordinary demands of life, but does not
include retardation which is a condition of arrested or incomplete development of mind of a person, specially characterized by sub
normality of intelligence.
4. Disability caused due to—

(i) chronic neurological conditions, such as—
(a) "multiple sclerosis" means an inflammatory, nervous system disease in which the myelin sheaths around the axons of
nerve cells of the brain and spinal cord are damaged, leading to demyelization and affecting the ability of nerve cells in the
brain and spinal cord to communicate with each other;
(b) "Parkinson’s disease" means a progressive disease of the nervous system marked by tremor, muscular rigidit y , and
slow, imprecise movement, chiefly affecting middle-aged and elderly people associated with degeneration of the basal ganglia of
the brain and a deficiency of the neurotransmitter dopamine.
(ii) Blood disorder—
(c) "hemophilia" means an inheritable disease, usually affecting only male but transmitted by women to their male
children, characterized by loss or impairment of the normal clotting ability of blood so that a minor would may result in
fatal bleeding;
(d) "Thalassemia" means a group of inherited disorders characterized by reduced or absent amounts of hemoglobin.
(e) "sickle cell disease" means a hemolytic disorder characterized by chronic anemia, painful events, and various
complications due to associated tissue and organ damage; "hemolytic" refers to the destruction of the cell membrane ofred
blood cells resulting in the release of hemoglobin.
E. Norms for Multiple Disabilities
Candidates with multiple disabilit ies with permanent physical impairment of 40 % and above are considered as disabled and
theyare eligible for claiming Engineering Admission against Differently Abled Persons category (Certificate No. VI).
Multiple Disabilities (more than one of the above specified disabilities) including deaf blindness which means a condition in
which a person may have combination of hearing and visual impairments causing severe
communication, developmental, and educational problems.
CERTIFICAT E No. I
Name of the Applicant:…………………………………… Application No.
Medical Certificate for Visually Impaired (Blindness and Low Vision)

(TO BE ISSUED BY THE DISTRICT MEDICA L BOARD)
Certified, that the District Medical Board of ………………… …………. (City) have this .................................................... day of
…………….. 2024 examined the candidate whose particulars are given below.
1. Name of the Candidate :

2. Father’s Name :
3. Sex :
4. Age :
5. Identification Marks 1) ……………………...2)…………………………….
6. Whether Orthopaedically /audiologically impaired : Yes / No
(If yes for either one or both medical certificate/s
for fitness from the respective Board has to be produced)
7. Low vision: (Person with low vision means a person with impairment of vision
of less than 6/18 to 6/60 with best correction in the better eye or impairment of
field in any one of the following categories)
a) Reduction of fields less than 50 degree :
b) Heminaopia with macular involvement :
c) Attitudinal defect involvement lower fields :
8. Categories of Visual Disability
(Please choose the appropriate box)
Tick (as
Category Better eye Worse eye Impairment Applicable)
Category O 6/9 – 6/18 6/24 to 6/36 20 %
Category I 6/16 – 6/36 6/20 to Nil 40 %
Category II 6/40 – 4/60 or field of vision 10º - 20º 3/60 to Nil 75 %
Category III 3/60 to 1/60 or field of vision 10º F.C at 1 ft. to Nil 100 %
Category IV F.C at 1 ft. to Nil or field of vision 10º F.C at 1 ft. to Nil 100 %
F.C at 1 ft. to Nil or
One eyed persons 6/6 field of vision 10º 30 %
ONE EYED persons with normal vision are not considered as disabled Note: F. C. means Finger Count
9. Whether eligible for consideration under Differently Abled
Persons quota : Yes /No
10. Whether the candidate is physically and mentally fit to be considered
for admission in engineering College / Technical institution : Yes / No (if no please specify reasons)
Signature of the applicant: …………………………………
Member 1 Member 2 Chairman

[Signature and Seal] [Signature and Seal] [Signature and Seal]
Seal of the Medical Board

*Strike out whichever is not applicable.
Note: Candidates with low vision of 40% Impairment and above are considered as disabled and are
eligible for consideration under reserved quota.
CERTIFICAT E No. II
Name of the Applicant:……………………………………… Application No.
Medical Certificate for Hearing Impaired (Deaf and Hard Hearing)

Certified that the District Medical Board of………………… …………… …….(City ) have this ............................. day of
………………… … ….20 24 examined the candidate whose particulars are given below.
1. Name of the Candidate :
2. Father’s Name :
3. Sex :
4. Age :
5. Identification Marks 1.
2.
6. Whether Orthopaedically /Visually impaired : Yes / No
(If yes for either one or both medical certificate/s
for fitness from the respective specialist /s to be produced)
7. Nature of hearing loss and extent of disability
: RE. LE.
a) Pure tone average db ………………… ………………….
b) Speech discrimination score ………………… …………………
8. a) Whether a suitable hearing aid to be used : Yes /No

b) Is the impairment non-progressive : Yes /No
9. Whether eligible for consideration under Differently Abled

Persons quota : Yes /No
10. Whether the candidate is physically and mentally fit to

be considered for admission in engineering
College / Technical institution : Yes / No (if no please
Specify reasons)
Member1 Member2 Chairman

[SignatureandSeal] [Signature andSeal] [Signature and Seal]
*Strike out whichever is not applicable. Seal of the Medical Board
Note: Candidates with hearing ability 40 db and above only in the better ear with speechdiscrimination score
of 50% and above are eligible for consideration under reserved quota.
CERTIFICATE No. III
Name of the Applicant ………………………………… Application No.
Medical Certificate for Locomotor disability including Cerebral palsy, Leprosy cured, Dwarfism,
Acid attack victims and Muscular dystrophy
(TO BE ISSUED BY THEDISTRICT MEDICAL BOARD)
Certified that the District Medical Board of…………………………………….(City)have this............................................. day of

……………………….2024 examined the candidate whose particulars are given below.
1. Name of the Candidate : Space for affixing

recent Passport size
2. Father’s Name : photograph of the
3. Sex : candidate duly
attested by Chairman
4. Age : District Medical
5. Identification Marks : 1. 2. Board
6. He/she is found to be categorized as persons with
Locomotor disability Cerebral palsy Leprosy cured Dwarfism Acid attack victims Muscular dystrophy
7. Nature of Orthopaedic :
8. Extent of permanent disability in percentage :
9. Whether the candidate fulfils the following Standards and may
be considered for admission in Engineering College/
Technical Institution :
(a) Normal Blood Pressure : Yes /No
(b) Mentally Normal : Yes /No
(c) Independent in ambulation with or without calipers
but without any support : Yes / No
(d) Good standing balance with or without calipers
but without any support : Yes /No
(e) Hand function within normal limits without any aid : Yes /No
(f) Good control over bowel and bladder : Good / Not good
(g) Is the disability non-progressive : Yes / No
10. Whether eligible for consideration under Differently Abled Persons Quota : Yes / No
11. Whether the candidate is physically and mentally fit
to be considered for admission in Engineering
College /Technical Institution : Yes / No (If no please
specify reasons)


Note: Candidates with permanent Physical Impairment 40 % and above are eligible for consideration under reserved
quota.
CERTIFICAT E No. I V
Name of the applicant:………………………………… Application No.
Medical Certificate
(Autism / Intellectual disability / Specific learning disability / Mental illness)
Certified, that the District Medical Board of…………………… (City) have this ................................. day
of .........................2024 examined the candidate whose particulars are given below.
Space for affixing

1. Name of the candidate : recent Passport size
photograph of the
2. Father’s Name : candidate duly
attested by
3. Sex :
Chairman District
4. Approximate Age : Medical Board
5. Identification marks : 1.……………………………………………… ………………………….
2. ………………………………………………………………………….
6. He/she is found to be categorized as persons with
Autism Intellectual disability Specific learning disability Mental illness
7. Extent of permanent disability in percentage…………… % (in words....................................................................... %).

8. This condition is progressive/ not progressive/ likely to improve/ not likely to improve*.
9. Whether the candidate is eligible for consideration under Differently Abled Persons quota Yes /No
10. Whetherthecandidateisphysicallyandmentallyfittobeconsideredforadmission Yes /No

in Engineering College/ Technical Institution (if No please specify reasons)

Note: Candidates with permanent Physical Impairment 40% and above are eligible for consideration
under reserved quota.
CERTIFICATE No. V
Name of the applicant: ………………………………… Application No.
Medical Certificate for Multiple Disability (TO BE ISSUED BY THE DISTRICT MEDICAL BOARD)
Certified, that the District Medical Board of ........................... (City) have this ................................. day
of..............................2024 examined the candidate whose particulars are given below.
1. Name of the candidate:

2. Father’s Name:
3. Sex:
4. Approximate Age:
5. Identification marks: 1. ………………………………………………………………………….
2. ………………………………………………………………………….
6. He/she is a Case of Multiple Disability. His/her extent of permanent physical

impairment/disability has been evaluated for the disabilities ticked below, and
shown against the relevant disability in the table below.
Permanent Physical
Sl. Affected Part of
Disability Diagnosis Impairment /
No. Body Mental Disability (in %)
Left/Right/both arms
1. Locomotor Disability
Left/Right/both legs
2. Low Vision Single eye / both eyes
3. Blindness Both eyes
4. Hearing Impaired Left/Right/both ears
5. Mental Retardation
6. Mental Illness
7. Other Specified Disabilities
7. Extent of overall permanent physical impairment in percentage ………… % (in words ................................... %)
8. This condition is progressive / non-progressive / likely to improve / not likely to improve*.Yes/No
9. Whether the candidate is eligible for consideration under Differently Abled Persons quota Yes/No
10. Whether the candidate is physically and mentally fit to be considered for admission in
Engineering College / Technical Institution . (if No please
specify reasons )

Seal of the Medical

Board

Note: Candidates with permanent Physical Impairment 40 % and above are eligible for consideration
under reserved quota.
ANNEXURE IV
ANNEXURE IV
GATE PAPER CODE
ENGINEERING /TECHNOLOGY
Paper Discipline Paper Discipline

Code Code
AE A e ro s p ace E n g in e er in g Geo lo g y
GG
AG A g ricu lt u r al E n g in ee rin g G eo p h y s ics
AR A rch it ect u re an d P lan n in g IN In s t ru m en t at io n E n g in e er in g
BM B iomedical Engineering MA M at h em a t ic s
BT B io t ech n o lo g y ME M ech an ical E n g in ee rin g
CE C iv il En gin eer in g MN M in in g En g in ee rin g
CH C h em ica l En g in ee r in g MT M et allu rg ic al E n g in ee rin g
CS C o mp u t e r S cien ce & I n f o r m at io n T ech PE P et ro leu m E n g in eer in g
CY C h em i s t ry PH P h y s ics
E C E le c t ro n i c s & C o m m u n i c a t i o n E n g g PI P r o d u c t io n & I n d u s t r i a l E n g g
EE E le c t r i c a l E n g in e e r i n g ST S t a t is t i c s
ES Environmental Science & Engineering TF T e x t i l e E n g g. & F i b r e S c i e n c e
EY E c o l o g y a n d Evolution
GE Geomatics Engineering
NM Naval Architecture and Marine Engineering DA Data Science and Artificial Intelligence
XE – ENGINEERING SCIENCES XL – LIFE SCIENCES

COMMON ENGINEERING ADMISSION PROCEDURE (CEAP 2024)
ANNA UNIVERSITY, CHENNAI – 600 025
ADMISSION TO M.E. / M.Tech. / M.Arch. / M. Plan. DEGREE PROGRAMMES
ANNEXURE V
CEAP -2024
LIST OF INSTITUTIONS PARTICPATING IN SINGLE WINDOW COUNSELING
# Institutions have only CEETA PG seats. There are no GATE seats
SL. COLLEGE
NO CODE NAME OF THE INSTITUTION
COLLEGE OF ENGINEERING, GUINDY (CEG), CHENNAI -25
1 1
(UNIVERSITY DEPARTMENTS OF ANNA UNIVERSITY)
ALAGAPPA COLLEGE OF TECHNOLOGY (ACT), CHENNAI -25
2 2
SCHOOL OF ARCHITECTURE AND PLANNING (SAP), CHENNAI -25
3 3
MADRAS INSTITUTE OF TECHNOLOGY, CHROMEPET, CHENNAI-44
4 4
ANNAMALAI UNIVERSITY - FACULTY OF ENGINEERING AND
5 5#
TECHNOLOGY
CIPET: INSTITUTE OF PETROCHEMICA LS TECHNOLOGY (IPT)
6 1321 (FORMERLY CENTRAL INSTITUTE OF PLASTICS ENGINEERING AND
TECHNOLOGY) CHENNAI-32
7 1516 THANTHAI PERIYAR GOVT INSTITUTE OF TECHNOLOGY, VELLORE-632002
8 2005 GOVERNM ENT COLLEGE OF TECHNOLOGY, COIMBATORE- 641013
9 2006 P.S.G. COLLEGE OF TECHNOLOGY, COIMBATORE-641004
10 2007 COIMBATORE INSTITUTE OF TECHNOLOGY, COIMBATORE-641014
11 2603 GOVERNM ENT COLLEGE OF ENGINEERING – BARGUR-635104
12 2615 GOVERNMENT COLLEGE OF ENGINEERING - SALEM -636011
13 2709 # GOVERNMENT COLLEGE OF ENGINEERING, ERODE (FORMERLY INSTITUTE OF

ROAD AND TRANSPORT TECHNOLOGY)-638316
14 3011 # UNIVERSITY COLLEGE OF ENGINEERING, TIRUCHIRAPPA LLI-620024
15 4974 # GOVERNM ENT COLLEGE OF ENGINEERING – TIRUNELVELI-627007
16 5008 THIAGARAJAR COLLEGE OF ENGINEERING , MADURAI -625015
ALAGAPPA CHETTIAR GOVERNM ENT COLLEGE OF ENGINEERING AND

17 5901 #
TECHNOLOGY – KARAIKUDI-630003

CEAP 2024 Information Booklet

Uploaded by

Copyright:

Available Formats

CEAP 2024 Information Booklet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CEAP 2024 Information Booklet

Uploaded by

Copyright:

Available Formats

COMMON ENGINEERING ADMISSION PROCEDURE 2024

INFORMATION AND INSTRUCTIONS TO CANDIDATES

(FOR GATE CATEGORY ONLY)

1. GENERAL STRUCTURE OF P.G. PROGRAMMES

Full-Time PG programmes comprise of 4 semesters (2 years).

 One of the conditions listed under A. QUALIFYING DEGREE

 One of the conditions specified under B. GATE

1. Total marks in X Standard Examination in percentage

The merit list will be published in Anna University W eb Portal.

Community Issuing Authority

9. GENERAL INFORMATION ABOUT CEAP FOR GATE CATEGORY

11. PROCEDURE FOR REGISTRATION OF APPLICATION

 Candidate should apply only through online in the Web Portal

 GATE paper code is given in Annexure IV

 UPLOAD THE RELEVANT DOCUMENTS:

o Before the commencement of Online Counseling, the Counseling schedule and

o The list of institutions participating in Single Window Counseling through

o The availability of number of seats / courses / branches h o s t e d in the Anna

o A candidate can get allotment for one programme only.

13. POST MATRIC SCHOLARSHIP

Publ icati on of Merit Li st cfa.annauniv.edu/ceap2024 20.05.2024

O nli ne Counseli ng cfa.annauniv.edu/ceap2024 26.05.2024

ELIGIBILITY QUALIFICATIONS FOR ADMISSION TO VARIOUS

I. FACULTY OF CIVIL ENGINEERING

14. M.E. Environmental Engineering and B.E. / B.Tech.

20. M. Tech. Ocean Technology B.E. / B.Tech.

17. M.E. Industrial Safety Engineering B.E./B.Tech (All Branches)

30. M.E. Thermal Engineering (with B.E. / B.Tech.

36. M. E. Mobility Engineering B.E. / B.Tech.

5. M.E. Electrical Machines B.E. / B.Tech.

8. M.E. Power Engineering and Management

9. M.E. Embedded System Technologies B.E. / B.Tech.

7. M.Tech. Cyber Forensics and B.E. / B.Tech.

19. M.Tech. Information Technology B.E. / B.Tech.

20. M.E. E-Learning Technologies B.E. / B.Tech.

21. M.E. Artificial Intelligence and Data B.E. / B.Tech.

10. M.E. Digital Signal processing B.E. / B.Tech.

13. M.E. Space Science and Engineering B.E. / B.Tech.

21. M.E. Electronics and Communication B.E. / B. Tech.

23. M.E. Microwave and Optical B.E. / B. Tech.

M.Sc. (Any branch of Chemistry)

M.Sc. (2 years/Integrated 5 years)

1. M.Tech. Defence Technology Faculty of Mechanical Engineering:

Faculty of Information and Communication

* Chemical Engineering and Chemical Technology are not Eligible

Sl. P.G. Programmes Eligible Qualification

4. M. Arch. Landscape Architecture

6. M. Arch. Urban Design

SCHEDULED TRIBES IN TAMIL NADU 32. Palliyar

DIFFERENT LY ABLED PERSONS CATEGORY

Eligibility criteria for various disabilities

A. Norms for Visual Impairment

Category Better eye Worse eye Impairment

Note: F.C. means Finger Count

4. Disability caused due to—

E. Norms for Multiple Disabilities

Name of the Applicant:…………………………………… Application No.

Medical Certificate for Visually Impaired (Blindness and Low Vision)

1. Name of the Candidate :