Scribd Logo
Upload

Welcome to Scribd!

  • 13 views

    SABIC® PPcompound - 2606 - Global - Technical - Data - Sheet

    Uploaded by

    Fahri ibişoğlu

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SABIC® PPcompound - 2606 - Global - Technical - Data - Sheet

    Uploaded by

    Fahri ibişoğlu
    13 views2 pages

    Original Title

    SABIC® PPcompound_2606_Global_Technical_Data_Sheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    13 views2 pages

    SABIC® PPcompound - 2606 - Global - Technical - Data - Sheet

    Uploaded by

    Fahri ibişoğlu

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SABIC® PPCOMPOUND 2606

    PP COMPOUND MINERAL FILLED IMPACT MODIFIED

    DESCRIPTION
    SABIC® PPcompound 2606 is a mineral filled modified polypropylene. Typical material properties include an excellent impact stiffness balance with a
    low density. This material was optimized for low smell, low emission and good scratch resistance. Typical applications include automotive interior parts
    such as trims and dashboards.

    SABIC® PPcompound 2606 is a designated automotive grade.

    IMDS ID: 138505251

    TYPICAL PROPERTY VALUES Revision 20211207

    PROPERTIES TYPICAL VALUES UNITS TEST METHODS

    POLYMER PROPERTIES
    Melt Flow Rate (MFR)
    at 230 °C and 5 kg 23 dg/min ISO 1133

    at 230 °C and 2.16 kg 5 dg/min ISO 1133


    (1)
    Density 960 kg/m³ ISO 1183

    Filler content 10 % SABIC method


    (2)
    Mould shrinkage
    24 hours after injection moulding 1.2 % SABIC method
    (1)
    MECHANICAL PROPERTIES
    Tensile test

    Tensile modulus 1400 MPa ISO 527/1A


    stress at yield 21 MPa ISO 527/1A

    stress at break 20 MPa ISO 527/1A


    strain at break 150 % ISO 527/1A

    Flexural test

    Flexural modulus 1400 MPa ISO 178/1A


    (3)
    Izod impact notched

    at 23 °C N.B. kJ/m² ISO 180/1A

    at 0 °C 10 kJ/m² ISO 180/1A


    at -20 °C 5.5 kJ/m² ISO 180/1A
    (1)
    THERMAL PROPERTIES
    Heat deflection temperature

    at 0.45 MPa (HDT/B) 90 °C ISO 75

    Coeff. of linear thermal expansion


    -30 °C to 100 °C 100 µm/mK ISO 11359-2

    (1) Injection molded sample ISO527-1A


    (2) Injection molded plaque 65x65x3.2mm
    (3) N.B.: No Break

    STORAGE AND HANDLING


    Avoid prolonged storage in open sunlight, high temperatures (<50 °C) and/or high humidity as this could well speed up alteration and consequently loss
    of 2023
    © quality of thebymaterial
    Copyright SABIC. All and/or its packaging. Keep material completely dry for good processing.
    rights reserved

    DISCLAIMER
    Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
    otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
    INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
    (1)
    THERMAL PROPERTIES
    Heat deflection temperature
    at 0.45 MPa (HDT/B) 90 °C ISO 75
    Coeff. of linear thermal expansion
    -30 °C to 100 °C 100 µm/mK ISO 11359-2

    (1) Injection molded sample ISO527-1A


    (2) Injection molded plaque 65x65x3.2mm
    (3) N.B.: No Break

    STORAGE AND HANDLING


    Avoid prolonged storage in open sunlight, high temperatures (<50 °C) and/or high humidity as this could well speed up alteration and consequently loss
    of quality of the material and/or its packaging. Keep material completely dry for good processing.

    DISCLAIMER
    Any sale by SABIC, its subsidiaries and affiliates (each a “seller”), is made exclusively under seller’s standard conditions of sale (available upon request) unless agreed
    otherwise in writing and signed on behalf of the seller. While the information contained herein is given in good faith, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED,
    INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE
    PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION. Each customer must determine the suitability of seller
    materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is
    intended, or should be construed, to grant any license under any patent or other intellectual property right.

    © 2023 Copyright by SABIC. All rights reserved

    You might also like