P R O D U C T D ATA S H E E T

UNIVERSAL RACK
K E Y F E AT U R E S
• Supports 19” rack-mount equipment
California
designed for two-post panel mounting like
OSHPD
patch panels and network switches or use
OPM-0112-13
with shelves to support computer servers.

• Easy positioning of equipment or shelves

Threaded equipment
with marked and numbered rack-mount
mounting holes
spaces.

• Quick attachment of equipment with

threaded equipment mounting holes and
included equipment-mounting screws.

• Delivers unassembled in a single carton

— quick and easy bolt-together assembly
takes less than 10 minutes.
Marked and Numbered
rack-mount units (U)
• Lightweight aluminum construction for
easy transport and positioning during
installation.

• Integrated grounding with a built-in

attachment point for a ground (earthing)
connection.

• Attach CPI vertical cable managers to the Holes in base angle

side of the rack through pre-punched for floor attachment
holes.

• Secure the rack to the floor quickly with a Universal Rack is a heavy duty storage solution for patch panels and network switches and can be used with shelves
concrete, wood or raised floor installation
kit through pre-punched holes in base
to hold computer servers. Universal Rack uses less floor space than a cabinet or a four-post rack. Use Universal Rack
angle. in telecommunications rooms or equipment rooms to save floor space and hold heavy equipment.

A P P L I C AT I O N S Universal Rack meets project specifications. Universal Rack holds 1,500 lb (680.4 kg) of equipment, has integrated
• Use with vertical and horizontal cable gounding and is available UL and cUL Listed as a communications circuit accessory. Universal Rack supports 19”, 23”
managers to support interconnect and
network equipment in
or 35” wide rack-mount equipment and shelves and is available in several heights. Equipment attaches to the front or
telecommunications rooms, equipment rear of the 3”D (76 mm) vertical mounting channels with screws. Equipment mounting positions are marked and
rooms and data centers. numbered making it easy to position and install equipment or shelves.
• Use with shelves to support equipment.

Racks deliver unassembled in a compact carton. Universal Rack is easy to assemble. Components bolt together with
USE WITH
• Motive™ Cable Management
included hardware. Assembly holes in the rack uprights are threaded. Assembly takes approximately 10 minutes.
• Evolution® Cable Management Two-post racks must be secured to building structure. Universal Rack has pre-punched base angles making it easy to
• Velocity® Cable Management attach the rack to the floor. Use a CPI installation kit for wood, slab or raised floors.
• Rack and Frame Installation Kit
• Raised Floor Rack Support For 3” Channel
Most Universal Rack applications require cable management. Vertical cable managers attach directly to the side of
R E L AT E D A C C E S S O R I E S Universal Rack. CPI cable managers organize cables by-rack-mount-space simplifying future moves, adds and changes
• 3” Channel Rack-To-Runway to the network. The best solution includes horizontal managers in between patch panels and network switches to fan
Mounting Plate patch cords into individual port connections.
• Vertical PDUs for Racks
• Rack Shelves
See reverse for product selection. Contact CPI Technical Support for configuration assistance.

US & Canada Latin America Europe Middle East & Africa Asia Pacific
+1-800-834-4969 +52-55-5203-7525 +44-1628-524-834 Dubai, UAE +86 21 6880-0266
Toronto, Ontario, Canada Toll Free within Mexico chatsworth.com +971-4-2602125 chatsworth.com.cn
+905-850-7770 01-800-01-7592 chatsworth.ae
chatsworth.com chatsworth.com.co

[email protected]
P R O D U C T D ATA S H E E T UNIVERSAL RACK

S P E C I F I C AT I O N S DIMENSIONS
• Open floor-mount two-post rack supports
19”W EIA, 23”W or 35”W rack-mount
equipment
• For indoor use only, in environmentally
controlled areas; may not be used outdoors, in Flange
industrial or harsh environments, or in plenum Height Edge to
U
spaces ft (m) Flange
• Available sizes: 3 (0.9) 17 Edge
A
- Heights: See Dimension Table 4 (1.2) 24
Dimension 19” EIA Rack 23” EIA Rack
- Width: 20.3” (515.9 mm), 24.3” 5 (1.5) 31 in (mm) in (mm)
(617.5 mm), 26.3” (922.3 mm) Mounting
5.5 (1.7) 34 Hole A 17.75 (450.9) 21.75 (552.5)
- Depth: 15” (381 mm)
• Equipment space: 6 (1.8) 38 to
Mounting B 18.31 (465.1) 22.31 (566.7)
- Heights: See Dimension Table 6.5 (2.0) 41 Hole
- Width: 19” EIA (17-3/4” clearance), B C 16 (410.0) 20 (510.0)
7 (2.1) 45
23” (21-3/4” clearance),
35” (33-3/4” clearance) 7.5 (2.3) 48 D 20.31 (515.9) 24.31 (617.5)
- Depth: 20”D (508 mm) 8 (2.4) 51
Note: Double-sided shelves for 26”D (660.4 mm)
8.5 (2.6) 55
equipment are available. Use QuadraRack® 4-Post
Frame when rack-mount equipment exceeds 20”D. 9 (2.7) 58
• Equipment Support:
- 1 pair C-shaped equipment mounting
channels
- 19”W, 23”W or 35”W
- EIA-310-D compliant, Universal hole pattern
- 5/8”-5/8”-1/2” vertical hole spacing C
D
- Threaded #12-24 equipment mounting holes
(50) #12-24 Screws included
- Fixed in place
• Cable Management
O R D E R I N G I N F O R M AT I O N
Use vertical and horizontal cable managers,
sold as accessories The part numbers listed below are the most popular styles. There are two other top bar/angle styles that are not shown in
• Load capacity: the tables below:
1,500 lb (680.4 kg) of equipment
19”W Universal Rack 23”W Universal Rack
• Grounding/Bonding
- Top angles, base angles and side channels Part Number Shipping Part Number
Description Shipping
are electrically bonded by assembly Weight Description
19”W EIA UL Listed 23”W UL Listed Weight
hardware
46353-X31 48353-X31 36”H x 19”W, 17U 25 (11.3) 46383-X31 48383-X31 36”H x 23”W, 17U 26 (11.8)
- One exception - top angles are not
electrically bonded on Flush Bolted Racks 46353-X20 48353-X20 48”H x 19”W , 24U 28 (12.7) 46383-X20 48383-X20 48”H x 23”W, 24U 29 (13.2)
(P/N 467XX) 46353-X19 48353-X19 60”H x 19”W, 31U 35 (15.9) 46383-X19 48383-X19 60”H x 23”W, 31U 36 (16.3)
- A masked mounting location for ground lug 46353-X00 48353-X00 66”H x 19”W, 34U 36 (16.3) 46383-X00 48383-X00 66”H x 23”W, 34U 39 (17.6)
with two 1/4-20 threaded studs spaced
5/8” apart is provided inside the side 46353-X01 48353-X01 72”H x 19”W, 38U 37 (16.8) 46383-X01 48383-X01 72”H x 23”W, 38U 40 (18.1)
channel 46353-X02 48353-X02 78”H x 19”W, 41U 38 (17.2) 46383-X02 48383-X02 78”H x 23”W, 41U 41 (18.6)
- Racks that are over 6’H (1.8 m) have top 46353-X03 48353-X03 84”H x 19”W, 45U 39 (17.7) 46383-X03 48383-X03 84”H x 23”W, 45U 42 (19.1)
and bottom mounting locations
- Use the CPI Grounding Jumper 46353-X05 48353-X05 90”H x 19”W, 48U 40 (18.1) 46383-X05 48383-X05 90”H x 23”W, 48U 43 (19.5)
(P/N 40159-008) as a rack bonding 46353-X15 48353-X15 96”H x 19”W, 51U 41 (18.6) 46383-X15 48383-X15 96”H x 23”W, 51U 44 (20)
conductor 46353-X17 48353-X17 102”H x 19”W, 55U 41 (18.6) 46383-X17 48383-X17 102”H x 23”W, 55U 45 (20.4)
• Certifications:
46353-X08 48353-X08 108”H x 19”W, 58U 43 (19.5) 46383-X08 48383-X08 108”H x 23”W, 58U 46 (20.9)
- EIA-310-D compliant
- Select models are UL Listed as a X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White. X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
communications circuit accessory Also available with flat top bars (P/N 460XX) or flush bolted top angles Also available with flat top bars (P/N 460XX) or flush bolted top angles
- OSHPD OPM-0261-13, Preapproval of (P/N 467XX). (P/N 467XX).
Manufacturer's Certification (OPM) 35”W Universal Rack
• Material:
Part Number Shipping
Aluminum extrusion Description Weight
• Construction: 35”W UL Listed lb (kg)
Bolted assembly, Ships unassembled
46363-X01 N/A 72”H x 35”W, 38U 49 (22.2)
• Finish:
Clear grained aluminum or Epoxy-polyester 46363-X03 N/A 84”H x 35”W, 45U 51(23.1)
hybrid powder coat paint. Available in black, X=color: 1=Gray, 2=Computer Beige, 5=Clear, 7=Black, E=Glacier White.
gray, computer beige or glacier white. Also available with flush bolted top angles (P/N 467XX). There are no
shelves for 35”W Universal Racks. Use with block-mounting brackets.

While every effort has been made to ensure the accuracy of all information, CPI does not accept liability for any errors or omissions
and reserves the right to change information and descriptions of listed services and products.
©2016 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, CPI, CPI Passive Cooling, eConnect, MegaFrame,
Saf-T-Grip, Seismic Frame, SlimFrame, TeraFrame, GlobalFrame, CUBE-iT PLUS, Evolution, OnTrac, QuadraRack and Velocity
are federally registered trademarks of Chatsworth Products. Simply Efficient, Secure Array and Clik-Nut are trademarks of
Chatsworth Products. All other trademarks belong to their respective companies. Rev.8 09/17 MKT-60020-314