0% found this document useful (0 votes)
33 views8 pages

RTD Wire

Uploaded by

benkbenk1727
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
33 views8 pages

RTD Wire

Uploaded by

benkbenk1727
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

RTD (Resistance Thermometer) Wire

A range of wire for use with RTD Sensors in


PVC, PFA, Fiberglass and MICA insulation
available from stock for immediate delivery

TC for Temperature Sensing, Measurement and Control


RTD (Resistance Thermometer) Wire
PVC Insulated RTD Wire - 30°C to +105°C

 2, 3, 4, 6 or 8 cores of 24 or 20 AWG
diameter twisted conductors PVC insulated
with tinned copper braid and overall PVC
sheath for use up to 220°F

 Cores color coded:-


2 core: 1 cores red and 1 core white
3 core: 2 cores red and 1 core white
4 core: 2 cores red and 2 cores white
6 core: 4 cores red and 2 cores white
8 core: 4 cores red and 4 cores white
Outer sheath: Grey
Heat Resistant PVC Insulated with Metal Braid
Cores of stranded copper conductors. Cores heat resistant PVC insulated. Cores bunched together.
 Ideal for general purpose applications Tinned copper wire braided. heat resistant PVC sheathed overall.

Stock Number RP27 RP37 RP47 RP67 RP87 RP33 RP43


CONDUCTORS

Wire Type (number of strands x AWG) 7x32 7x32 7x32 7x32 7x32 13x32 13x32
Total Wire Size - AWG (S = Stranded) 24S 24S 24S 24S 24S 21S 21S
Total Area (mm 2 ) 0.22 0.22 0.22 0.22 0.22 0.44 0.44
Insulation Heat Resistant PVC
Number of Pairs 2 3 4 6 8 3 4
CORES

Conductor Configuration Twisted


Shielded* Yes
Insulation Heat Resistant PVC

Insulation
Continuous -22 to +220
Rating (°F)
Short Term —
Color Coding Yes
OVERALL

Abrasion Resistance Good


Physical
Properties
Moisture Resistance Very Good
Typical Weight (lbs/1000ft) 14 14 21 28 55 55 68
(excluding reel)

Diameter under Armor (inches) —


Diameter over Armor (inches) —
Overall Diameter (inches)

0.16” 0.16” 0.20” 0.24” 0.28” 0.20” 0.24”
Notes Ideal for general use in normal ambient applications. Rejects electromagnetic and electrostatic
interference. Round section.

* Where wire incorporate a metal braid, the braid can be used as a shield.
† These values are nominal and if critical to your application, please request a physical check.

The above wire where applicable have cores which are color coded in accordance with IEC 60751:2008 and BS EN 60751.
These wire are normally available from us for immediate delivery from stock.
If you have any specific requirements regarding cable lengths please let us know so that we may make a satisfactory offer to meet your needs.

Color Codes (as per IEC 60751) Order Code - Example

Stock No.

RP37

These wire are for use with RTD Resistance Thermometers.

These wire are normally available from us for immediate


delivery from stock to IEC 60751 color coding.
2 wire 3 wire 4 wire

2 TC Measurement and Control Inc Tel: 708-449-0700 · [email protected] · www.tc-inc.com


RTD (Resistance Thermometer) Wire
PFA Insulated RTD Wire - 100°F to +480°F

 2, 3, 4, 6 or 8 cores of twisted conductors


overall PFA sheath for use up to 480°F.
Tinned copper braid and Mylar®
aluminium tape shield option.

 Cores color coded:-


2 core: 1 cores red and 1 core white
3 core: 2 cores red and 1 core white
4 core: 2 cores red and 2 cores white
6 core: 4 cores red and 2 cores white
8 core: 4 cores red and 4 cores white

PFA Insulated PFA Insulated with Shield PFA Insulated with Metal Braid
 Ideal for general purpose applications Cores of stranded copper Cores of stranded copper Cores of stranded copper conductors. Cores PFA insulated. Cores
conductors. Cores PFA insulated and conductors. PFA extruded, bunched bunched together. Nickel plated copper wire braided. PFA
bunched together. PFA sheathed together and shielded with Mylar sheathed overall. Orange outer sheath (also available with a black
overall. aluminium tape and drain wire. PFA outer, please suffix order code with a ‘B’ e.g. RT37B).
sheathed overall.

Stock Number RT38 RT48 RT39 RT49 RT69 RT27 RT37 RT47 RT67 RT82 RT87
CONDUCTORS

Wire Type (number of strands x AWG) 7x32 7x36 7x29 7x29 7x29 7x32 7x32 7x32 7x32 7x29 7x32
Total Wire Size - AWG (S = Stranded) 24S 26S 30S 30S 30S 24S 24S 24S 24S 30S 24S
Total Area (mm 2 ) 0.22 0.124 0.05 0.05 0.05 0.22 0.22 0.22 0.22 0.05 0.22
Insulation PFA PFA PFA
Number of Pairs 3 4 3 4 6 2 3 4 6 8 8
CORES

Conductor Configuration Twisted Twisted Twisted


Shielded* No Yes Yes
Insulation Thin PFA PFA PFA

Insulation
Continuous -100 to +480 -100 to +480 -100 to +480
Rating (°F)
Short Term +570 +570 +570
Color Coding Yes Yes Yes
OVERALL

Abrasion Resistance Good Very Good Very Good


Physical
Properties
Moisture Resistance Good Very Good Very Good
Typical Weight (lbs/1000ft) 7 14 7 8 11 21 14 14 21 21 34
(excluding reel)

Diameter under Armor (inches) — — —


Diameter over Armor (inches) — — —
Overall Diameter (inches)

0.08” 0.08” 0.09” 0.10” 0.11” 0.12” 0.12” 0.12” 0.16” 0.12” 0.20”
Notes Round section. Rejects Rejects electromagnetic Gas, steam and water tight insulation. Rejects electromagnetic
electromagnetic interference. interference. and electrostatic interference. Round section.

* Aluminised Mylar® tape in contact throughout by a bare 7/0.3mm diameter tinned copper drainwire. Where wire incorporate a metal braid, the braid can be used as a shield.
† These values are nominal and if critical to your application, please request a physical check.

The above wire where applicable have cores which are color coded in accordance with IEC 60751:2008 and BS EN 60751.
These wire are normally available from us for immediate delivery from stock.
If you have any specific requirements regarding cable lengths please let us know so that we may make a satisfactory offer to meet your needs.

Color Codes (as per IEC 60751) Order Code - Example

Stock No.

RT37

These wire are for use with RTD Resistance Thermometers.

These wire are normally available from us for immediate


delivery from stock to IEC 60751 color coding.
2 wire 3 wire 4 wire

TC Measurement and Control Inc Tel: 708-449-0700 · [email protected] · www.tc-inc.com 3


RTD (Resistance Thermometer) Wire
Other PFA Insulated RTD Wire - 100°F to +390°F

 1, 3, 4 or 6 cores of PFA insulated wire for


use up to 390°F.

 Cores color coded:-


3 core: 2 cores red and 1 core white
4 core: 2 cores red and 2 cores white
6 core: 4 cores red and 2 cores white
8 core: 4 cores red and 4 cores white
Outer sheath: Orange

 Ideal for general purpose applications


PFA / Silicone Rubber Insulated PFA ‘single’ PFA Insulated with
Cores of stranded copper conductors. Cores One core of stranded copper conductor PFA Stainless Steel Braid
PFA insulated. Cores bunched together. insulated. Red or White available. Cores of stranded copper
Silicone Rubber sheathed overall. conductors, PFA insulated and
bunched together with overall
stainless steel braid.

Stock Number RS37 RS47 RS67 RS87 TEF7R TEF7W TEF2R TEF2W RT32/SSB RT37/SSB
CONDUCTORS

Wire Type (number of strands x AWG) 7x32 7x32 7x32 7x32 7x32 7x32 7x32 7x32 7x28 7x32
Total Wire Size - AWG (S = Stranded) 24S 24S 24S 24S 24S 24S 24S 24S 30S 24S

Total Area (mm 2 ) 0.22 0.22 0.22 0.22 0.22 0.22 0.03 0.03 0.05 0.22
Insulation PFA PFA PFA
Number of Pairs 3 4 6 8 1 1 1 1 3 3
CORES

Conductor Configuration Twisted — Twisted


Shielded* No No Yes
Insulation Silicone Rubber PFA PFA

Insulation
Continuous -40 to +390 -100 to +480 -100 to +480
Rating (°F) +570 +570
Short Term -50 to +480
Color Coding Yes Red White Red White Yes
OVERALL

Abrasion Resistance Good Very Good Very Good


Physical
Moisture Resistance Very Good Very Good Very Good
Properties
Typical Weight (lbs/1000ft) 14 21 21 28 <7 <7 <7 <7 7 14
(excluding reel)

Diameter under Armor (inches) — — —


Diameter over Armor (inches) — — —
Overall Diameter (inches)

0.16” 0.16” 0.20” 0.20” <0.04” <0.04” <0.04” <0.04” 0.08” 0.1”
Notes Gas, steam and water tight insulation. Ideal for use in sensor manufacture or for Rejects electromagnetic and
Rejects electromagnetic and electrostatic short extensions. electrostatic interference.
interference. Round section. Round section.

* Where wire incorporate a metal braid, the braid can be used as a shield.
† These values are nominal and if critical to your application, please request a physical check.

The above wire where applicable have cores which are color coded in accordance with IEC 60751:2008 and BS EN 60751.
These wire are normally available from us for immediate delivery from stock.
If you have any specific requirements regarding cable lengths please let us know so that we may make a satisfactory offer to meet your needs.

Color Codes (as per IEC 60751) Order Code - Example

Stock No.

RT32/SSB

These wire are for use with RTD Resistance Thermometers.

These wire are normally available from us for immediate


delivery from stock to IEC 60751 color coding.
2 wire 3 wire 4 wire

4 TC Measurement and Control Inc Tel: 708-449-0700 · [email protected] · www.tc-inc.com


RTD (Resistance Thermometer) Wire
Silicon Rubber Insulated Cables - 40°F to +390°F Fiberglass Insulated RTD Wire - 76°F to +870°F

 3 cores of 24AWG diameter twisted  3, 4, or 6 cores of 24 AWG bunched


conductors silicone rubber insulated with conductors fiberglass with fiberglass overall
silicone rubber overall. with a stainless steel braid overall.

 Cores color coded:-  Cores color coded:-


3 core: 2 cores red and 1 core white 3 core: 2 cores red and 1 core white
4 core: 2 cores red and 2 cores white
 Ideal for use in general applications, 6 core: 4 cores red and 2 cores white
autoclaves and industrial environments
where the cable is subjected to continuous  Suitable for use at normal air ambient
static curves and bends temperatures where there is a possibility of
a hot spot which might damage lower rated
Silicone Rubber Fiberglass Insulated with Stainless
Insulated
wire such as PVC or PFA Steel Braid
Cores of stranded copper Cores of stranded copper conductors. Cores
conductors. Cores Silicone double glass lapped, glass fibre braided and
insulated. Cores Twisted varnished. Cores bunched together, glass
together. Silicone rubber fibre braided overall and impregnated with
sheathed overall. silicone varnish. Stainless steel braid overall.

Stock Number RF37 Stock Number RF37 RF47 RF67


CONDUCTORS

CONDUCTORS

Wire Type (number of strands x AWG) 7x32 Wire Type (number of strands x AWG) 7x32 7x32 7x32
Total Wire Size - AWG (S = Stranded) 24S Total Wire Size - AWG (S = Stranded) 24S 24S 24S
Total Area (mm 2 ) 0.22 Total Area (mm 2 ) 0.22 0.22 0.22
Insulation Silicone Rubber Insulation Fiberglass
Number of Pairs 3 Number of Pairs 3 4 6
CORES

CORES

Conductor Configuration Twisted Conductor Configuration Twisted


Shielded* No Shielded* Yes
Insulation Silicone Rubber Insulation Fiberglass

Insulation
Continuous -40 to +390 Insulation
Continuous +870
Rating (°F) Rating (°F)
Short Term -58 to +480 Short Term +1000
Color Coding Yes Color Coding Yes
OVERALL

OVERALL

Abrasion Resistance Good Abrasion Resistance Good


Physical Physical
Properties
Moisture Resistance Very Good Properties
Moisture Resistance None
Typical Weight (lbs/1000ft) 14 Typical Weight (lbs/1000ft) 14 21 28
(excluding reel) (excluding reel)

Diameter under Armor (inches) — Diameter under Armor (inches) —


Diameter over Armor (inches) — Diameter over Armor (inches) —
Overall Diameter (inches)

0.16” Overall Diameter (inches)

0.12” 0.16” 0.20”
Notes Highly flexible, flame retardant, Notes Above 356°F the integrity of the cable is
good resistance to lubricating maintained to the upper insulation rating
oils, round section. limit provided the cable is not flexed
particularly when cold.

* Where wire incorporate a metal braid, the braid can be used as a shield.
† These values are nominal and if critical to your application, please request a physical check.

The above wire where applicable have cores which are color coded in accordance with IEC 60751:2008 and BS EN 60751.
These wire are normally available from us for immediate delivery from stock.
If you have any specific requirements regarding cable lengths please let us know so that we may make a satisfactory offer to meet your needs.

Color Codes (as per IEC 60751) Order Code - Example

Stock No.

RF37

These wire are for use with RTD Resistance Thermometers.

These wire are normally available from us for immediate


delivery from stock to IEC 60751 color coding.
2 wire 3 wire 4 wire

TC Measurement and Control Inc Tel: 708-449-0700 · [email protected] · www.tc-inc.com 5


RTD (Resistance Thermometer) Wire
XLPE Insulated Twisted with Shield (Low Smoke Zero Halogen) - 22°F to +165°F

 3 or 6 cores of 20 AWG twisted


conductors. The cable incorporates a high
temperature rated MICA glass tape with a
XLPE (Cross Linked Polyethylene) insulation
on the cores and Low Smoke Zero Halogen
material on the bedding and/or outer sheath

 Sheathing materials are Halogen free

 Essential for situations where it is of


strategic importance to ensure that the cable
continues to function during a major crisis
MICA Glass / XLPE / LS0H with Shield MICA Glass / XLPE / LS0H with Shield and
involving fire Cores of stranded copper conductors, MICA glass Armor
taped and XLPE insulated. Cores bunched and Cores of stranded copper conductors, MICA glass
shielded with Mylar® aluminium tape and drain taped and XLPE insulated. Cores bunched and
wire. LS0H sheathed overall. shielded with Mylar® aluminium tape and drain
wire. LS0H sheathed. Steel wire armored and LS0H
sheathed overall.

Stock Number RM37 RM67 RM37/SWA RM67/SWA


CONDUCTORS

Wire Type (number of strands x AWG) 7x28 7x28 7x28 7x28


Total Wire Size - AWG (S = Stranded) 20S 20S 20S 20S
Total Area (mm 2 ) 0.5 0.5 0.5 0.5
Insulation MICA and XLPE MICA and XLPE
Number of Pairs 3 6 3 6
CORES

Conductor Configuration Twisted Twisted


Shielded* Yes Yes
Insulation LS0H LS0H

Insulation
Continuous -22 to +165 -22 to +165
Rating (°F)
Short Term — —
Color Coding Yes Yes
OVERALL

Abrasion Resistance Good Good


Physical
Properties
Moisture Resistance Very Good Very Good
Typical Weight (lbs/1000ft) 68 89 218 340
(excluding reel)

Diameter under Armor (inches) — 8 11


Diameter over Armor (inches) — 10 13
Overall Diameter (inches)

0.31” 0.43” 0.51” 0.63”
Notes Free of Halogens. Round section. Rejects Free of Halogens. Round section. Rejects
electromagnetic and electrostatic interference. electromagnetic and electrostatic interference.
Armored for mechanical strength.

* Aluminised Mylar® tape in contact throughout by a bare 7/0.3mm diameter tinned copper drainwire.
† These values are nominal and if critical to your application, please request a physical check.

The above wire where applicable have cores which are color coded in accordance with IEC 60751:2008 and BS EN 60751.
These wire are normally available from us for immediate delivery from stock.
If you have any specific requirements regarding cable lengths please let us know so that we may make a satisfactory offer to meet your needs.

Color Codes (as per IEC 60751) Order Code - Example

Stock No.

RM37

These wire are for use with RTD Resistance Thermometers.

These wire are normally available from us for immediate


delivery from stock to IEC 60751 color coding.
2 wire 3 wire 4 wire

6 TC Measurement and Control Inc Tel: 708-449-0700 · [email protected] · www.tc-inc.com


RTD (Resistance Thermometer) Wire
PVC Insulated Multi Triads and Multi Quads RTD Wire - 22°F to +220°F

 Incorporates Heat Resistant (HR) PVC


5 5
suitable for use in the temperature 45 5
34
33
2
4555
34
33
2

range -22°F to +220°F


2 22
1 2 1 2
1 1

1
1

1
 Extremely useful where there is a need to
run a number of RTD signals back to
instrumentation

 20 AWG conductors PVC insulated and


grouped in triads or quads with overall
copper wire braid and overall PVC sheath
Multi Triad PVC Insulated Multi Quad PVC Insulated
Triads of stranded copper conductors. Triads HR PVC insulated. Quads of stranded copper conductors. Quads HR PVC insulated.
Triads bunched together. Tinned copper wire braided. HR PVC sheathed Quads bunched together. Tinned copper wire braided.
overall. HR PVC sheathed overall.

Stock Number MT3705 MT3710 MT3715 MT4705 MT4710 MT4715


CONDUCTORS

Wire Type (number of strands x AWG) 7x32 7x32 7x32 7x32 7x32 7x32
Total Wire Size - AWG (S = Stranded) 24S 24S 24S 24S 24S 24S
Total Area (mm 2 ) 0.22 0.22 0.22 0.22 0.22 0.22
Insulation Heat Resistant PVC Heat Resistant PVC
Number of Pairs 5x3 10 x 3 15 x 3 5x4 10 x 4 15 x 4
CORES

Conductor Configuration Twisted Twisted


Shielded* Yes Yes
Insulation Heat Resistant PVC Heat Resistant PVC

Insulation
Continuous -22 to +165 -22 to +165
Rating (°F)
Short Term — —
Color Coding Yes Yes
OVERALL

Abrasion Resistance Good Good


Physical
Properties
Moisture Resistance Very Good Very Good
Typical Weight (lbs/1000ft) 89 150 198 109 184 259
(excluding reel)

Diameter under Armor (inches) — —


Diameter over Armor (inches) — —
Overall Diameter (inches)

0.4” 0.5” 0.6” 0.4” 0.6” 0.7”
Notes Rejects electromagnetic and electrostatic interference. Round section. Rejects electromagnetic and electrostatic interference. Round section.

* Where wire incorporate a metal braid, the braid can be used as a shield.
† These values are nominal and if critical to your application, please request a physical check.

The above wire where applicable have cores which are color coded in accordance with IEC 60751:2008 and BS EN 60751.
These wire are normally available from us for immediate delivery from stock.
If you have any specific requirements regarding cable lengths please let us know so that we may make a satisfactory offer to meet your needs.

Color Codes (as per IEC 60751) Order Code - Example

Stock No.

MT3705

These wire are for use with RTD Resistance Thermometers.

These wire are normally available from us for immediate


delivery from stock to IEC 60751 color coding.
2 wire 3 wire 4 wire

TC Measurement and Control Inc Tel: 708-449-0700 · [email protected] · www.tc-inc.com 7


TC Measurement and Control Inc
PO Box 685
Hillside , IL 60162
Tel: 708-449-0700
Toll Free: 877 244 1777
Fax: 708-449-0777
Email: [email protected]
Web: www.tc-inc.com
© TC Measurement and Control, Inc.
Issue Number: 0424

TC Inc for Temperature Sensing, Measurement and Control

You might also like