Singer 240W1, W2, W4

Form 3105w
(354)
Prinled in U. S. A.
LIST
OF
PARTS
SINGER
MACHINES Nos.
240wl, 240w2 and 240w4
IKE SINGER lUNUFUCTURIHG COMPANV
From•*A
the library of: Superior Sewing Machine & Supply LLC
Trade Mark of THE SINGER MANUFACTURING COMPANY
INSTRUCTIONS FOR OILING
To insure easy running and prevent unnecessary wear of

ports which are in movable contact, the machine requires oiling.
Use "TYPE C" OIL, sold by Singer Sewing Machine Company.
BEFORE STARTING THE MACHINE, fill reservoir to "high"

mark on sight gauge, as instructed in Form 3093W.
Check oil level when machine is not running. Never allow

level to drop below "low" mark on sight gouge.
The addition of oil should not be necessary more than

once every few months.
Copyright, U. S. A., 1947, 1953 and 1954

by The Singer Manufacturing Company
All Rights Reserved for all Countries
From the library of: Superior Sewing Machine & Supply LLC
INDEX
Page
Accessories. 12
Attchments and Accessories 13
Cloth Plates JJ*
Finger Guard 14
Fittings 14
Foot Lifters 15 & 16
Knee Lifter 12
Machine No.240wl.
Machine No. 240w2.. 10
Machine No. 240w4 ^4? 11

Numerical List of Parts 17
Thread Unwinder 13
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number in

the FIRST column.
The number stamped on a Sewing Machine Part is the
number of the Single Part only, except when the part includes
Set Screws, Clamping Screws, Studs and Rollers Spun on. Small
Wires riveted, or Ports soldered together, etc., which it is
necessary to furnish in combination.
Every combination of ports sent out has its specific number
which, although not stamped on Ports (except in above cose),
must be used when ordering the combination.
Each number always indicates the SAME PART in what
ever list it appears, or for whatever Machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed.
AL—HeatTreated for Toughness.
ALX—HeatTreated for Toughness and Black Oxide.
B—Polished, Nickel Plated and Buffed.
C—Hardened only.
D—Polished only.
E—Soft, Not polished.
F—Hardened and Polished.
J—Nickel Plated only.
R—Merlized.
X—Black Oxide, for Iron and Steel.
XC—Hardened and Black Oxide, for Iron and Steel.
Y—Black Nickel Plated only.
Z—Chromium Plated.
These letters MUST BE USED when they appear in the
list and AFTER the number, as in the list.
In this series
1 to 1500, 200001 to 201500 and 350001 to 351500 are
Screw Numbers.
1501 to 1800, 201501 to 201800 and 351501 to 351800 are
Nut Numbers.
1801 to 2000, 201801 to 202000 and 351801 to 352000 are
Roller Numbers.
2001 to 50000 and 202001 to 350000 are Numbers of
Machine Parts.
The figures in the second column refer only to the plate
in which the illustration of the port is shown and are NOT TO
BE USED in ordering.
Two or more numbers over a cut indicate that the differ
ence between such parts is not visible in an illustration.
Ports marked with an asterisk (*) are furnished only when
repairs are made at the factory.
LIST OF PARTS COMPLETE
, 5*0*1^
A\ACHINE No. 240wl

HIGH SPEED. SINGLE NEEDLE.
SINGLE THREAD CHAIN STITCH.

DROP FEED. NEEDLE BAR TAKE-UP.
ROTARY LOOPER. THREAD NIPPER.
PLAIN TENSION.
FOR NECKTIE HEMMiN©, UMBRELLA SEAMIN©

AND GENERAL STITCHIN© ON LieHT AND
MEDIUM WEIGHT FABRICS.
No. Plate Name
2'*3601P 15608 Cloth Plate
Note: Cloth Plate 2'*3601X will be furnished in place
of 2l*3601P if so specified on order,
21*3602 15608 Cloth Plate Gasket
222119X 15608 " " Position Pin
691X 15608 " " Screw (3)
25878 15609 Edge Guide
51224B 15609 " " Thumb Screw
243614P 15606 Face Plate
200166X 15606 " " Screw (2)
243615 15605 Feed Bar with 200394C and 243634
243616 15605 " " Carrier with 243618 and two
243620
243617 15605 Feed Bar Carrier Hinge Stud
From the library
243618 of:15605
Superior" Sewing
" "Machine
" &" Supply
Bearing LLC
6 1PARTS FOR A\ACH1NE No. 240w!
No. Plate Name

200364c 15605 Feed Bar Carrier Hiage Stud Set Screw
243619 15605 " •' Hinge Stud
243620 15605 " " " " Bearing
243681 15605 " " " " CoUar with 200141F
200141F 15605 " " "
" " Set Screw
200394c 15605 " Set Screw
243621 15605 " " Slide Block
243624 15609 " Dog, for Umbrella Seaming and
Necktie Work, for 243715
243631 15605 Feed Dog Adjusting Plate
202F 15605 •t tt .1 .. Screw
176D 15609 " •' Screw
243632 15605 •' Driving Connection Link with
243633
243633 15605 Feed Driving Connection Link Bearing
243634 15605 " " " " Hinge Stud
243635 15605 " " Link with 243636
243636 15605 " " " Bearing
243743 15605 " Lubricating Wick
243637 15605 " Regulating Connection
243638 15605 " " " Hinge Pin
243639 15605 " " Crank
243640 15605 " " " Bushing
200380C 15605 " " " " Position
Screw
200380C 15605 Feed Regulating Crank Bushing Position
Screw Check Screw
243641 15605 Feed Regulating Crank Link with 243642
243642 15605 " " " " Bearing
243643 15605 " " Wheel (indexed) with
243638
350555C 15605 Feed Regulating Wheel Lock Screw
243644 15605 " " " " " Lever
200122X 15605 X M II 11 11 II
Cap Screw
213949 15605 Feed Regulating Wheel Lock Screw
Washer
«243645 Frame with 243665, 244026 and three
222119X
243646 15602 Frame End Cover
243745 15602 " 243646 with 243744
and 350366X
243647 15602 Frame End Cover Gasket
350366X 15602 " " " Oil Stop Screw
243744 15602 " •• " " " " Gasket
(vellumoid)
200099X 15602 Frame End Cover Screw (4)
350366X 15601 " Oil Stop Screw
243648 15603 Looper
243736 15603 " 243648 with 1368E and 243682
243649 15608 " Safety Guard
PARTS FOR MACHINE No. 240wl
No, Plate Name

243710 15608 Looper Safety Guard Compression
Spring
243650 15608 Looper Safety Guard Post (2)
691X 15608 " " " Screw (2)
350558X 15603 " Set Screw (long)
350559X 15603 " " " (short)
243746 15603 " Shaft with 350558X and 350559X
243652 15603 " " Bearing (back)
243653 15603 " " " (front)
243742 15603 " " End Thrust Adjusting Col
lar with two 200392C
200392C 15603 Looper Shaft End Thrust Adjusting Col
lar Set Screw
243741 15603 Looper Shaft End Thrust Bushing
243682 15603 " Washer
1368E 15603 " " Screw
243604P 15603 Machine Pulley (aluminum alloy casting)
for 3/8 in,"V" belt (outside diam.of
belt groove 2,6 in,) (rim diam,
3-3/16 in,) with two 200379C
243731 15603 Machine Pulley 243604P with 243606
and 243738
Note: Machine Pulley 243731 furnished with this
machine unless otherwise specified on order.
for 5/16 in,ro\ind belt (diam, of belt
groove 1-13/32 in,) (rim diam,
3-3/16 in,) with two 200379C
and 243738
350419X 15603 Machine Pulley Adjusting Screw
243606 15603 " " Ball Bearing
243738 15603 " " Gasket
200379C 15603 " " Set Screw
243607 15603 " " Shaft
243608 15603 " " " 243607 with 243609
243609 15603 " " " Ball Bearing
243611 15603 " " " Sleeve
243612 15603 " " " " 243611 with
243613
243613 15603 Machine Pulley Shaft Sleeve Oil Seal
200958X 15603 " •' " " Set Screw
243654 15601 Needle Bar with 9611 and 200141F
243655 15601 " " Bushing (2)
243656 15601 " " Connecting Link
243657 15601 « •« " stud with 200086C
and 206758
206758 15601 Needle Bar Connecting Stud Oil Packing
(wick)
200086C 15601 Needle Bar Connecting Stud Pinch Screw
PARTS FOR A\ACHINE No. 240wl
No, Plate Name

243658 15602 Needle Bar Driving Connection with
243659 and 243660
243659 15602 Needle Bar Driving Connection Bushing
(lower)
(upper)
243661 15602 Needle Bar Driving Crank with 200058D
243683 15602 " " " " 243661 with
243606
243606 15602 Needle Bar Driving Crank Ball Bearing
200058D 15602 " " " " Pinch Screw
243662 15602 " " " Shaft with 243740
243684 15602 " " " " 243662 with
243609
243609 15602 Needle Bar Driving Shaft Ball Bearing
200136C 15602 " " " " Oil Stop Screw
243740 15602 " " " " Oiling Wick
243664 15601 " " Oiling Felt
9611 15601 " " Thread Tube
200141F 15601 " Set Screw
243665 15608 Oil Level Indicator
243666 15608 " Reservoir Cover
243667 15608 " " " Gasket
200064X 15608 •• " " Screw (12)
243668 15601 Presser Bar with 2001 lOD
243655 15601 " " Bushing
243673 15601 " " Lifter
200201C 15601 " " " Hinge Screw
243669 15601 " •< Lifting Bracket with 201052C
201052C 15601 " " " " Set Screw
243670 15602 " " " Rock Shaft
202510 15602 " " " " " Collar
with 200141F
200141F 15602 Presser Bar Lifting Rock Shaft Collar
Set Screw
243671 15602 Presser Bar Lifting Rock Shaft Crank
with 200141F
200141F 15602 Presser Bar Lifting Rock Shaft Crank
Set Screw
Spring
244026 15601 Presser Bar Lifting Rock Shaft Stop
Pin
208085 15601 Presser Bar Spring
22405 15601 " " " Washer
1121X 15601 " " Thvunb Screw (pressure
regulating)
243675 15609 Presser Foot, for Umbrella Seaming and
Necktie Work
200110D 15601 Presser Foot Screw
2102 15606 Tension Disc
PARTS FOR A\ACHINE No. 240wl
No. Plate Name

13710 15606 Tension Spring
350557C 15606 " Stud
243697 15606 " Thread Guide
1560C 15606 " Thumb Nut
243696 15606 Tension complete,Nos. I560C( 13710,
350557C and two 2102
129052 15606 Thread Nipper Bushing
1623C 15606 " Lock Nut
129158 15606 Disc
129053 15606 Plunger
19445 15606 " Pin
129054 15606 Spring
50952J 15606 Stud
243717 15606 Thread Nipper complete,Nos, 1623C,
19^115,509521. 129052 to 12905li and
two 129158
243703 15606 Thread Nipper Rod
243704 15606 " " " Bushing
243705 15606 " " '• Cap
243706 15606 " " " Operating Sleeve
243707 15606 tl II II II II Plug
243708 15606 '• " " Spring
243709 15606 " " Thread Guide
210683 15606 " Retainer Bracket with 200397X
200137X 15606 II " II Screw (2)
210993 15606 II II Sleeve
210992 15606 II II Spring
243711 15606 II 11 Stud
210958 15606 II II II Collar
200397X 15606 II II II Set Screw
243712 15606 Thread Retainer Bracket complete,Nos.
210683,210958,210992, 210993 and
2143711
243715 15609 Throat Plate, for 2143624
244X 15609 II II Screw (2)
10
MACHINE No. 240w2

GRADUATED ADJUSTABLE THREAD
MEASURING DEVICE. PLAIN TENSION.
FOR NECKTIE HEMMING, UMBRELLA SEAMING

AND GENERAL STITCHING ON LIGHT AND
MEDIUM WEIGHT FABRICS.
Same as Machine No.240wl with the following

exceptions:
No. Plate Name

243698 15607 Thread Measuring Adjusting Knob
(indexed)
200241C 15607 Thread Measuring Adjusting Knob Hinge
Screw
Spring
243701 15607 Thread Measuring Pull-off Finger
200136C 15602 " " " " Screw
243702 15607 " " Thread Guide
222119X 15607 " " " " Hinge
Pin
11
MACHINE No. 240w4

GRADUATED ADJUSTABLE THREAD
MEASURING DEVICE. LOOPER THREAD CUTTER.
PLAIN TENSION.
FOR LABEL STITCHING.
Same as Machine No.2li0wl with the following

exceptions:
No. Plate Name

243737 15604 Looper 243648 with 1368E and 243685
243685 15604 " Thread Cutter
1368E 15604 " " " Screw
243687 15610 Presser Foot with 200138X and 243686,
for stitching labels
243686 15610 Presser Foot Spring Guide
200138X 15610 II II II It Screw
(indexed)
200241C 15607 Thread Measuring Adjusting Knob Hinge
Screw
Spring
243701 15607 Thread Measuring Pull-off Finger
200136C 15602 II II II II Screw
243702 15607 " " Thread Guide
222119X 15607 •' " " " Hinge
Pin
12
ACCESSORIES
No. Plate Name

228719 15611 Drip Pan with four each 228721 and
wood screws 1-1/4 in.No.8,R.H.B.
228721 15611 Machine Cushion
2k X 1 Needles, six, size 11
160727 15611 Oil Container (filled, 5 oz. ,Mfg.oil, light
grade, not stainless) Nos. 160725 and
160726
160725 15611 Oil Container
160726 15611 " " Cap
160728 15611 " " Spout
225498 15611 Screw Driver (7-1/4 in.long)
228476 15611 " Driver
10875 15611 Wrench
KNEE LIFTER
228561 15612 Chain, 11 in.long, with two 202784

202784 15612 " Hook
228722 15612 Rock Lever with 200380C and 350231C
228723 15612 " " Bracket with 200347AL and
three wood screws 7/8 in., No. 12
228724 15612 Rock Lever Bracket 228723 with 228722
and 228725 to 228729
228725 15612 Rock Lever Hinge Pin
200380C 15612 " '• " " Set Screw
228364 15612 " " Knee Plate with 35023IC
15612 II II II II A.rm
228388
350231C 15612 " " " " " Set Screw
35023IC 15612 " " " " Set Screw
228726 15612 " " Lifting Arm
228727 15612 " " " " Crank with
350231C
228728 15612 Rock Lever Lifting Arm Crank Con
nection
350231C 15612 Rock Lever Lifting Arm Crank Set
Screw
228729 15612 Rock Lever Position Spring
228367 15612 •I • " Stop Stud
200347AL 15612 " " " " Set Screw
228730 15612 Knee Lifter Rock Lever complete, Nos.
228364,228367,228388, 228561,
228724 and Form A1360
ACCESSORIES 13
THREAD UNWINDER
No. Plate Name

228692 15613 Spool Pin
201528X 15613 " " Nut
228693 15613 " " Washer
225259 15613 " Rest (for one spool) (flat) with
201018C,201528X.228692 and
228693
150203 15613 Spool Rest Cushion (felt)
225388 15613 " " Rod
200383C 15613 " •• " Set Screw
201018C 15613 " " Set Screw
259658 15613 •' Stand with 200383C
225391 15613 Thread Guide
201696X 15613 " •' Lock Nut
225326 15613 " " Position Cup
225324 15613 " " Rod with 208AL and
225322
208AL 15613 Thread Guide Rod Screw
225322 15613 It •> !• Washer
225260 15613 Thread Unwinder (for one spool) com
plete, Nos, 150203,201696X, 225259,
225324,225326,225388,225391, •
259658 and three wood screws 7/8
in., No. 12
ATTACHMENTS AND ACCESSORIES
350568X 15608 Hold Down Screw

228721 15608 " " " Bushing
243685 15604 Looper Thread Cutter
NECKTIE HEMMERS
MACHINES NOS. 240wl and 240w2
120454 15617 Hemmer (plate) 3/32 in.hem

120455 15617 " " 1/8 in.hem
1534X 15617 " Thumb Nut
14 ATTACHMENTS AND ACCESSORIES
SEAMER
No. Plate Name

26029 15617 Seamer with 26361
26361 15617 •* Edge Guide
1534X 15617 " Thumb Nut
CLOTH PLATES
243601P 15608 Cloth Plate

243601X 15608 " Plate
243720 15608 (stainless steel)
FIN6ER GUARD
36822 15617 Finger Guard

36823 15617 " " Friction Washer
104J 15617 " " Hinge Screw
36824 15617 " •• Holder with 228K
228K 15617 " " " Clamping Screw
36825 15617 Finger Guard complete,Nos. 104J and
36822 to 36824
FITTINGS
FOR FLAT WORK
243623 15614 Feed Dog. for 243714

243674 15614 Presser Foot
243714 15614 Throat Plate, for 243623
FITTINGS 15
FOR LINED NECKTIES
No. Plate Name

243625 15614 Feed Dog. for 243716
243716 15614 Throat Plate, for 243625
FOR UMBRELLA SEAMING
243622 15614 Feed Dog. for 243713

243713 15614 Throat Plate, for 243622
FOOT LIFTERS
PARTS REQUIRED TO CHANGE FROM

KNEE LIFTER TO FOOT LIFTER
228474 15615 Foot Lifter Treadle Chain. 34 in.long,

with two 202784
202784 15615 Foot Lifter Treadle Chain Hook
FOOT LIFTER
FOR STANDS WITH FLAT TREADLE SUPPORT
14372 15615 Treadle

51074R 15615 •* Bolt
46709 15615 " " 51074R with 23250 and 67425
67425 15615 " " Lock Washer
23250 15615 " " Washer
14373 15615 " Extension
50581R 15615 " " Screw
2718 15615 " " •• Washer
17881 15615 " Shaft
14374 15615 " Spring
14375 15615 " Stand
14379 15615 Treadle complete,Nos.2718, 14372 to
14375, 17881, 50581R and two 46709
16 FOOT LIFTER
FOOT LIFTER
FOR STANDS WITH TUBULAR TREADLE SUPPORT
No. Plate Name

152170 15616 Treadle Extension
152171 15616 " '• Swivel Stud
II II II II Nut
51723X 15616
II II II II II Lock
701348 15616
Washer
152080 15616 Treadle Position Collar with 51089R
51089R 15616 " " " Clamping Bolt
with 51581R
51581R 15616 Treadle Position Collar Clamping
Bolt Nut
152153 15616 Treadle Spring
152169 15616 Foot Lifter Treadle (pressed steel)
with adjustable Extension complete,
NOS.51723X,152170,152171 and
701348
152095 15616 Foot Lifter Treadle 152169 with 152153
and two 152080
FOOT LIFTER
FOR USE WITH POWER TABLES
14372 18614 Treadle

14373 18614 " Extension
50581R 18614 " " Screw
2718 18614 " " " Washer
17881 18614 '* Shaft
14374 18614 " Spring
14375 18614 " Stand
14376 18614 Foot Lifter Treadle complete, Nos.
2718,14372 to 14375,17881, 50581R
and two wood screws 1-1/4 in.,No.
12,F.H.
17
NUMERICAL LIST OF PARTS
No. Plate Name

104J 15617 Finger Guard Hinge Screw, for 36825
176D 15609 Feed Dog Screw
202F 15605 " " Adjusting Plate Screw
208AL 15613 Thread Unwinder Thread Guide Rod
Screw, for 225324
22 8K 15617 Finger Guard Holder Clamping Screw,
for 36824
244X 15609 Throat Plate Screw
691X 15608 Cloth Plate Screw
69IX 15608 Looper Safety Guard Post Screw
1121X 15601 Presser Bar Thumb Screw (pressure
regulating)
1368E 15604 Looper Thread Cutter Screw, for 243737
1368E 15603 " Washer Screw, for 243736
1534X 15617 Hemmer Thumb Nut, for Machines Nos.
240wl and 240w2
1534X 15617 Seamer Thumb Nut
1560C 15606 Tension Thumb Nut, for 243696
1623C 15606 Thread Nipper Bushing Lock Nut, for
243717
2102 15606 Tension Disc, for 243696
2718 15615 Foot Lifter Treadle Extension Screw
Washer, for 14376 and 14379
9611 15601 Needle Bar Thread Tube, for 243654
10875 15611 W rench
13710 15606 Tension Spring, for 243696
Nos 14372 to 14375, for 14376 and 14379
14372 1561.5 Foot Lifter Treadle
14373 15615 •' " " Extension
14374 15615 " " " Spring
14375 15615 " " " Stand
14376 18614 Foot Lifter Treadle complete(for use
with Power Tables) Nos.2718,14372
to 14375, 17881, 50581R and two wood
screws 1-1/4 in. ,No. 12, F.H.
14379 15615 Foot Lifter Treadle complete (for Stands
with Flat Treadle Support) Nos.2718
14372 to 14375,17881,50581R and
two 46709
17881 15615 Foot Lifter Treadle Shaft, for 14376 and'
14379
19445 15606 Thread Nipper Plunger Pin, for 243717
22405 15601 Presser Bar Spring Washer
18 NUMERICAL LIST OF PARTS
No. Plate Name

23250 15615 Foot Lifter Treadle Bolt Washer, for
46709
25878 15609 Edge Guide,for Machines Nos. 240wl
and 240w2
26029 15617 Seamer with 26361
26361 15617 " Edge Guide, for 26029
Nos. 36822 to 36824, for 36825
36822 15617 Finger Guard
36823 15617 " " Friction Washer
36824 15617 " " Holder with 228K
36825 15617 Finger Guard complete,Nos. 104J and
36822 to 36824
46709 15615 Foot Lifter Treadle Bolt 51074R with
23250 and 67425, for 14379
50581R 15615 Foot Lifter Treadle Extension Screw,
for 14376 and 14379
50952J 15606 Thread Nipper Stud, for 243717
51074R 15615 Foot Lifter Treadle Bolt, for 46709
15616 It n M Position Collar
51089R
Clamping Bolt with 51581R, for
152080
51224b 15609 Edge Guide Thumb Screw, for Machines
Nos.240wl and 240w2
51581R 15616 Foot Lifter Treadle Position Collar
Clamping Bolt Nut, for 51089R
51723X 15616 Foot Lifter Treadle Extension Swivel
Stud Nut, for 152169
67425 15615 Foot Lifter Treadle Bolt Lock Washer,
for 46709
120454 15617 Hemmer (plate) 3/32 in.hem,for Neck
tie work, for Machines Nos.240wl
and 240w2
120455 15617 Hemmer (plate) 1/8 in.hem, for Neck
tie work, for Machines Nos.240wl
and 240w2
Nos. 129052 to 129054, for 243717
129052 15606 Thread Nipper Bushing
129053 15606 " " Plunger
129054 15606 " " Spring
129158 15606 " " Disc, for 243717
150203 15613 *' Unwinder Spool Rest Cushion
(felt) for 225260
152080 15616 Foot Lifter Treadle Position Collar
with 51089R,for 152095
152095 15616 Foot Lifter Treadle 152169 with 152153
and two 152080
152153 15616 Foot Lifter Treadle Spring, for 152095
NUMERICAL LIST OF PARTS 19
No. Plate Name

152169 15616 Foot Lifter Treadle (pressed steel) with
adjustable Extension complete
(for Stands with Tubular Treadle
Support) NOS.51723X, 152170, 152171
and 701348, for 152095
152170 15616 Foot Lifter Treadle Extension, for
152169
152171 15616 Foot Lifter Treadle Extension Swivel
Stud, for 152169
160725 15611 Oil Container, for 160727
160726 15611 •' " Cap. for 160727
160727 15611 Oil Container (filled, 5 oz.,Mfg.oil.
light grade, not stainless) Nos. 160725
and 160726
160728 15611 Oil Container Spout
200058D 15602 Needle Bar Driving Crank Pinch Screw,
for 243661
200064X 15608 Oil Reservoir Cover Screw
200086C 15601 Needle Bar Connecting Stud Pinch Screw.
for 243657
200099X 15602 Frame End Cover Screw
200110D 15601 Presser Foot Screw, for 243668
200122X 15605 Feed Regulating Wheel Lock Screw
Lever Cap Screw
200136C 15602 Needle Bar Driving Shaft Oil Stop Screw,
for Machine No.240wl
200136C 15602 Thread Measuring Pull-off Finger
Screw, for Machines Nos.240w2
and 240w4
200137X 15606 Thread Retainer Bracket Screw
200138X 15610 Presser Foot Spring Guide Screw,
for 243687
2001'*1F 15605 Feed Bar Hinge Stud Collar Set Screw,
for 243681
20011*1F 15601 Needle Set Screw, for 243654
200141F 15602 Presser Bar Lifting Rock Shaft Collar
Set Screw, for 202510
2001'ilF 15602 Presser Bar Lifting Rock Shaft Crank
200166X 15606 Face Plate Screw
200201C 15601 Presser Bar Lifter Hinge Screw
2002iilC 15607 Thread Measuring Adjusting Knob Hinge
Screw, for Machines No8.240w2
and 240w4
2003'*7AL 15612 Knee Lifter Rock Lever Stop Stud Set
Screw, for 228723
20036110 15605 Feed Bar Carrier Hinge Stud Set Screw
200379C 15603 Machine Pulley Set Screw, for 243604P
and 243605P
200380C 15605 Feed Regulating Crank Bushing Position
Screw
No. Plate Name

200380C 15605 Feed Regvilating Crank Bushing Position
Screw Check Screw
200380C 15612 Knee Lifter Rock Lever Hinge Pin Set
Screwt for 228722
200383C 15613 Thread Unwinder Spool Rest Rod Set
Screw, for 259658
200392C 15603 Looper Shaft End Thrust Adjusting Col
lar Set Screw, for 243742
200394c 15605 Feed Bar Hinge Stud Set Screw, for
243615
200397X 15606 Thread Retainer Stud Set Screw, for
210683
200958X 15603 Machine Pulley Shaft Sleeve Set Screw
201018C 15613 Thread Unwinder Spool Rest Set Screw,
for 225259
201052C 15601 Presser Bar Lifting Bracket Set Screw,
for 243669
201528X 15613 Thread Unwinder Spool Pin Nut, for
225259
201696X 15613 Thread Unwinder Thread Guide Lock
Nut, for 225260
202510 15602 Presser Bar Lifting Rock Shaft Collar
with 200141F
202784 15615 Foot Lifter Treadle Chain Hook, for
228474
202784 15612 Knee Lifter Chain Hook, for 228561
206758 15601 Needle Bar Connecting Stud Oil Packing
(wick) for 243657
208085 15601 Presser Bar Spring
210683 15606 Thread Retainer Bracket with 200397X,
for 243712
210958 15606 Thread Retainer Stud Collar, for 243712
210992 15606 " " Spring, for 243712
210993 15606 " " Sleeve, for 243712
Washer
222119X 15608 Cloth Plate Position Pin, for 243645
222119X 15607 Thread Measuring Thread Guide Hinge
Pin, for 243645
225259 15613 Thread Unwinder Spool Rest (for one
spool) (flat) with 201018C, 201528X,
228692 and 228693. for 225260
225260 15613 Thread Unwinder (for one spool) com
plete, Nos .150203,201696X,225259.
225324,225326,225388, 225391.
259658 and three wood screws 7/8
in. ,No. 12
225322 15613 Thread Unwinder Thread Guide Rod
Washer, for 225324
225324 15613 Thread Unwinder Thread Guide Rod
with 208AL and 225322, for 225260
NUMERICAL LIST OP PARTS 21
No. Plate Name

225326 15613 Thread Unwinder Thread Guide Position
Cup, for 225260
' 225388 15613 Thread Unwinder Spool Rest Rod, for
225260
225391 15613 Thread Unwinder Thread Guide, for
225260
225498 15611 Screw Driver (7-1/4 in. long)
228364 15612 Knee Lifter Rock Lever Knee Plate with
350231C,for 228730
228367 15612 Knee Lifter Rock Lever Stop Stud, for
228730
228388 15612 Knee Lifter Rock Lever Knee Plate Arm,
for 228730
228474 15615 Foot Lifter Treadle Chain, 34 in. long,
with two 202784
228476 15611 Screw Driver
228561 15612 Knee Lifter Chain, 11 in. long, with two
202784, for 228730
228692 15613 Thread Unwinder Spool Pin, for 225259
228693 15613 " " •' " Washer, for
225259
228719 15611 Drip Pan with four each 228721 and wood
screws 1-1/4 in. ,No. 8,R.H. B.
228721 15608 Hold Down Screw Bushing
228721 15611 Machine Cushion, for 228719
228722 15612 Knee Lifter Rock Lever with 200380C
and 350231C,for 228724
228723 15612 Knee Lifter Rock Lever Bracket with
200347AL and three wood screws 7/8
in.,No. 12, for 228724
228724 15612 Knee Lifter Rock Lever Bracket 228723
with 228722 and 228725 to 228729,
for 228730
Nos .228725 to 228729, for 228724
228725 15612 Knee Lifter Rock Lever Hinge Pin
228726 15612 •' " " " Lifting Arm
It II II II II n
Z28727 15612
Crank with 350231C
228728 15612 Knee Lifter Rock Lever Lifting Arm
Crank Connection
228729 15612 Knee Lifter Rock Lever Position Spring
228730 15612 Knee Lifter Rock Lever complete, Nos.
228364,228367,228388.228561,
228724 and Form A1360
243601P 15608 Cloth Plate
243601X 15608 " Plate
243602 15608 " " Gasket
No. Plate Name

2436021? 15603 Machine Pulley (aluminum alloy casting)
for 3/8 in."V" belt (outside diam.of
belt groove 2,6 in.) (rim diam.
3-3/16 in.) with 200379C,£or
243731
for 5/16 in. round belt (diam.of belt
groove 1-13/32 in.) (rim diam.
3-3/16 in.) with two 200379C,for
243732
243606 15603 Machine Pulley Ball Bearing, for 243731
and 243732
243606 15602 Needle Bar Driving Crank Ball Bearing,
for 243683
243607 15603 Machine Pulley Shaft, for 243608
243608 15603 " " " 243607 with 243609
243609 15603 " " " Ball Bearing, for
243608
243609 15602 Needle Bar Driving Shaft Ball Bearing,
for 243684
243611 15603 Machine Pulley Shaft Sleeve, for 243612
243612 15603 1. 11 M ti 243611
with 243613
243613 15603 Machine Pulley Shaft Sleeve Oil Seal,
for 243612
243614P 15606 Face Plate
243615 15605 Feed Bar with 200394C and 243634
243616 15605 " " Carrier with 243618 and two
243620
243617 15605 Feed Bar Carrier Hinge Stud
243618 15605 " " " " " Bearing,
for 243616
243619 15605 Feed Bar Hinge Stud
243620 15605 " " " " Bearing, for 243616
243621 15605 " " Slide Block
243622 15614 " Dog, for 243713, for Umbrella
Seaming
243623 15614 Feed Dog, for 243714, for Flat Work
243624 15609 " " " Umbrella Seaming and
Necktie Work, for 243715
243625 15614 Feed Dog, for 243716, for Lined Neckties
243631 15605 " " Adjusting Plate
243632 15605 " Driving Connection Link with
243633
243633 15605 Feed Driving Connection Link Bearing,
for 243632
243634 15605 Feed Driving Connection Link Hinge
Stud, for 243615
i.?lii36ae 15605 Feed Driving Link with 243636
243636 15605 " " " Bearing, for 243635
243637 15605 " Regulating Connection
No. Plate Name

243638 15605 Feed Regulating Connection Hinge Pin,
for 243643
243639 15605 Feed Regulating Crank
243640 15605 " " " Bushing
243641 15605 " " " Link with 243642
243642 15605 " " " " Bearing, for
243641
243643 15605 Feed Regulating Wheel (indexed) with
243638
Lever
*243645 Frame with 243665, 244026 and three

222119X
243646 15602 Frame End Cover, for 243745
243647 15602 " " " Gasket
243648 15603 Looper,for 243736 and 243737
243649 15608 " Safety Guard
15608 ti II II Post
243650
243652 15603 •< Shaft Bearing (back)
243653 15603 II II 11 (front)
243654 15601 Needle Bar with 9611 and 200141F
243655 15601 " " Bushing
243655 15601 Presser Bar Bushing
243656 15601 Needle Bar Connecting Link
243657 15601 " " " Stud with 200086C
and 206758
243.4^ 15602 Needle Bar Driving Connection with
243659 and 243660
(lower) for 243658
(upper)for 2i^658
243661 15602 Needle Bar Driving Crank with 200058D,
for 243683
243662 15602 Needle Bar Driving Shaft with 243740,
for 243684
243664 15601 Needle Bar Oiling Felt
243665 15608 Oil Level Indicator, for 243645
243666 15608 " Reservoir Cover
243667 15608 II " Gasket
243668 15601 Presser Bar with 2001 lOD
243669 15601 'I " Lifting Bracket with
201052C
243670 15602 Presser Bar Lifting Rock Shaft
243671 15602 II II II II II Crank
with 200141F
243673 15601 Presser Bar Lifter
243674 15614 'I Foot, for Umbrella Seaming,
Lined Neckties and Flat Work
2k NUMERICAL LIST OF PARTS
No. Plate Name

243675 15609 Presser Foot, for Umbrella Seaming and
Necktie Work, for Machines Nos,
240wl and 240w2
243681 15605 Feed Bar Hinge Stud Collar with 200141F
243682 15603 Looper Washer, for 243736
243683 15602 Needle Bar Driving Crank 243661 with
243606
243684 15602 Needle Bar Driving Shaft 243662 with
243609
243685 15604 Looper Thread Cutter, for 243737
243686 15610 Presser Foot Spring Guide, for 243687
243687 15610 " " with 200138X and 243686,
for stitching labels, for Machine No.
240w4
243696 15606 Tension complete,Nos. 1560C, 13710,
350557C and two 2102
243697 15606 Tension Thread Guide
(indexed) for Machines Nos, 240w2
and 240w4
Nos 243700 to 243702, for Machines Nos.
240w2 and 240w4
243700 15607 Thread Measuring Adjusting Knob Spring
243701 15607 " Pull-off Finger
243703 15606 Nipper Rod
243704 15606 " " Bushing
243705 15606 " " Cap
243706 15606 " " Operating Sleeve
243707 15606 " " '• " Plug
243708 15606 " " Spring
243710 15608 Looper Safety Guard CompressionSpring
243711 15606 Thread Retainer Stud, for 243712
243712 15606 Thread Retainer Bracket complete, Nos.
210683,210958,210992,210993 and
243711
243713 15614 Throat Plate, for 243622, for Umbrella
Sezuning
243714 15614 Throat Plate, for 243623, for Flat Work
243715 15609 " " " 243624
243716 15614 243625. for Lined
Neckties
243717 15606 Thread Nipper complete, Nos, 1623C,
19445,50952J,129052 to 129054 and
two 129158
243720 15608 Cloth Plate (stainless steel)
and 243738
and 243738
No. Plate Name

243736 15603 Looper 243648 with 1368E and 243682,
for Machines Nos.240wl and
240w2
243737 15604 Looper 243648 with 1368E and 243685,
for Machine No. 240w4
243738 15603 Machine Pulley Gasket, for 243731 and
243732
243740 15602 Needle Bar Driving Shaft Oiling Wick,
for 243662
243741 15603 Looper Shaft End Thrust Bushing
243742 15603 " " " " AdjustingCol-
lar with two 200392C
243743 15605 Feed Lubricating Wick
243744 15602 Frame End Cover Oil Stop Screw
Gasket (vellumoid) for 243745
243745 15602 Frame End Cover 243646 with 243744
and 350366X
243746 15603 Looper Shaft with 350558X and 350559X
Spring
244026 15601 Presser Bar Lifting Rock Shaft Stop
Pin, for 243645
259658 15613 Thread Unwinder Spool Stand with
200383C,for 225260
350231C 15612 Knee Lifter Rock Lever Knee Plate Arm
350231C 15612 Knee Lifter Rock Lever Knee Plate Set
Screw, for 228364
350231C 15612 Knee Lifter Rock Lever Lifting Arm
Crank Set Screw, for 228727
350366X 15602 Frame End Cover Oil Stop Screw, for
243745
350366X 15601 Frame Oil Stop Screw
350419X 15603 Machine Pulley Adjusting Screw
350555C 15605 Feed Regulating Wheel Lock Screw
350557C 15606 Tension Stud, for 243696
350558X 15603 Looper Set Screw (long) for 243746
350559X 15603 " " " (short) for 243746
350568X 15608 Hold Down Screw
701348 15616 Foot Lifter Treadle Extension Swivel
Stud Nut Lock Washer, for 152169
2kn5k
350366X 21i3655
201052C
206758
2li!i026
200086C
2it365S
2ti3673
200110D 2ii366'i
2001'ilF
200201C
243745
243671- 200099X
243646
243658
350366X
200141F
243670 243744
24366
202510 24371*7
243683
200058D '
243661
200099X
243606
200136C 243647
243662
243609-
243684
243740
243659
243731-3/g" 243732-5/16"
2lt360tiP 21i3605P
200379C 2D0379C
21*3738
2li3606 21*3606
21*3738
243736
2436t*8
2t*3682
243608
21*3609'
1368E
21*3607 21*3613 I 243612
21*361 ij 350l*19X
350558X
21*3653 200392C r2«*37'*l
350559X
2l*37'*6 2i*37l*2
21*3652 200958X
243731-3/8*' 243732-5/jg"
21*360«*P 21*3605P
200379C 200379C
21*3738
21*3606 21*3606
2«*3738
^:^37
2ti36liB
.2143685 243608 Ui
C>
21*3609' O
4=-
1368E /2k%b07\
\
11*3613 I 243612
\ \5l*361l| 3S01*19X N)
(i •350558X 21*3653
^'*•'03^ 200392C y2l*37l*l
yuV^-
T
21*371*6 21*371*2 \
21*3652 ,200958X
15605-3/8
«n
:2-
co
-a"
C4
(>4
O-
J-
o
in /«o _f
1 ^
in ' Cfl
o
in x9
N / r
/ fn
«n • CM
ca'
243696 243717
1560C 50952J '
129158
129052
13710 ^I623C
2143709
2U36lJiP ^1290514
200166X 19445
2102 129053
2143705^1
243712
2437014^
210993 2ii3711 2143703-^
lHjl— .350557C
2143708-4
210992 210958
210683
200397X
200137X
200166X
243706
2143707
243696 243717
1560C 2002iilC ^0952J "
129158
129052
13710
1623C
243709
2»i3700
2i436l4P ^129054
200166X ^19^45
2102 ®^129053
243712 21i3698 243705^J
243704-^
210993 2kZ7n 243703-^
s
350557C g
243708-1
210992
210683
210958
r 2U3702
200397X
200137X
222il9X
200166X
2i*3701
243706-^
243707^
222119X
21i3650
21*3666
200061*X
2ii3710 21*3667
20006l*X
p 21*3601P
8 I 21*3601X
21*3720
W'
691X
21*3650
21*3602
20006l*X
21*3665
228721
35056ax
243715
243675 243624
244X
)76D
16=1
51224B
244X
21*3621*
21*3687 2l*l*X
21*3715
zii.
20013BX / J J
1
16=1
"n5 176D o1
•
•
I
m
•
ImJ 21*3686 Qy
15611-3/8
228730
228724
228729 ]
\
\
^r228725
\ ^2003li7AL
\
228723 t
Ls.
228728
228726
228722
228727
225260
225391 /201696X
225322
225326
'22532i»
228692
228693
V 208AL
225259
201018C
150203
201528X
225388
1200383C
/
15614-3/4
t-
nO
- <3
MS)
% <=•
jr*
^ \
^ ^ V . -Zi
^ \ ^r" NX
\ \i fj-
9
NWg™
l%ZJ
iC*'.
It
1-4
202784
1«4372 14379
228474-34" 202784
14373
2718
505B1R
46709 46709
51074R
5107ltR 14375
23250
67425
23250
17881
%
671*25
14374
152170
5i723X 152095
202781*
172171 228li7>*-3l*" 202781*
70131*8
,152169
5I089R #
51581R
51581R 51089R
' ♦
♦ # ♦
152080 ^ .
152153 152080
36825
120lt5ii-3/32'
26029
1201*55-1/8"
228K
36823 Ui
36821* O
26361 36822
153»tX 153l*X
14376 228474
202784
1437 14373
2718R
50581R
4375
17881
14374
202784

Singer 240W1, W2, W4

Uploaded by

Copyright:

Available Formats

Singer 240W1, W2, W4

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Singer 240W1, W2, W4

Uploaded by

Copyright:

Available Formats

Form 3105w

IKE SINGER lUNUFUCTURIHG COMPANV

To insure easy running and prevent unnecessary wear of

BEFORE STARTING THE MACHINE, fill reservoir to "high"

Check oil level when machine is not running. Never allow

The addition of oil should not be necessary more than

Copyright, U. S. A., 1947, 1953 and 1954

Attchments and Accessories 13

Cloth Plates JJ*

Foot Lifters 15 & 16

Machine No. 240w2.. 10

Machine No. 240w4 ^4? 11

In ordering from this list, use ONLY the PART number in

A\ACHINE No. 240wl

SINGLE THREAD CHAIN STITCH.

FOR NECKTIE HEMMiN©, UMBRELLA SEAMIN©

No. Plate Name

No, Plate Name

No, Plate Name

No. Plate Name

MACHINE No. 240w2

SINGLE THREAD CHAIN STITCH.

DROP FEED. NEEDLE BAR TAKE-UP.

ROTARY LOOPER. THREAD NIPPER.

GRADUATED ADJUSTABLE THREAD

MEASURING DEVICE. PLAIN TENSION.

FOR NECKTIE HEMMING, UMBRELLA SEAMING

Same as Machine No.240wl with the following

No. Plate Name

MACHINE No. 240w4

FOR LABEL STITCHING.

Same as Machine No.2li0wl with the following

No. Plate Name

No. Plate Name

228561 15612 Chain, 11 in.long, with two 202784

No. Plate Name

ATTACHMENTS AND ACCESSORIES

350568X 15608 Hold Down Screw

120454 15617 Hemmer (plate) 3/32 in.hem

No. Plate Name

243601P 15608 Cloth Plate

36822 15617 Finger Guard

243623 15614 Feed Dog. for 243714

FOR LINED NECKTIES

No. Plate Name

FOR UMBRELLA SEAMING

243622 15614 Feed Dog. for 243713

PARTS REQUIRED TO CHANGE FROM

228474 15615 Foot Lifter Treadle Chain. 34 in.long,

14372 15615 Treadle

FOR STANDS WITH TUBULAR TREADLE SUPPORT

No. Plate Name

14372 18614 Treadle

NUMERICAL LIST OF PARTS

No. Plate Name

No. Plate Name

No. Plate Name

No. Plate Name

No. Plate Name

No. Plate Name