Digi Connectcore Mp133 Development Kit Ds
Digi Connectcore Mp133 Development Kit Ds
Digi Connectcore Mp133 Development Kit Ds
Embedded device security is a critical design aspect for the growing ✓ Power supply and accessories
number of connected IoT applications. Digi ConnectCore SOM ✓ Reference designs and online documentation
solutions provide built-in security with Digi TrustFence®, a fully
PART NUMBER DESCRIPTION
integrated device-security framework simplifying the process of
securing connected devices. CC-WMP133-KIT Digi ConnectCore MP133 Development Kit
Specifications
APPLICATION PROCESSOR STMicroelectronics STM32MP133C, Arm® Cortex ®-A7 at 650 MHz, secure boot, crypto engine
Wi-Fi 5 dual-band 802.11a/b/g/n/ac 1x1 radio (up to 433.3 Mbps) with strong WPA3-Enterprise authentication/encryption
WIRELESS −40 °C to 85 °C (−40 °F to 185 °F) full temperature range; Bluetooth 5.2 (Basic Rate, Enhanced Data Rate and Bluetooth Low Energy)
OPERATING TEMPERATURE Industrial: −40 °C to 85 °C (−40 °F to 185 °F); depending on use case and enclosure/system design
RADIO APPROVALS US, Canada, EU, Japan, Australia/New Zealand, Brazil, Mexico
FCC Part 15 Class B, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, ICES- 003 Class B, VCCI Class II, AS 3548
EMISSIONS / IMMUNITY / SAFETY FCC Part 15 Subpart C Section 15.247, IC (Industry Canada), RSS-210 Issue 5 Section 6.2.2(o), EN 300 328, EN 301 489-17, EN 55024
EN 301 489-3, Safety (IEC 62368-1); visit www.digi.com/resources/certifications for latest updates
DESIGN VERIFICATION Temperature: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78; vibration/shock: IEC 60068-2-6, IEC 60068-2-64, IEC 60068-2-27, HALT
MOUNTING / PIN COUNT Common Digi SMTplus surface mount footprint using 76-pad edge castellated pads (1.27 mm pitch) or 245-pad LGA (1.27 mm pitch) option
Part Numbers
CC-SEC-ENT-ADD Digi ConnectCore Security Services — Additional product (same duration as main contract)
TRUSTFENCE
877-912-3444 I 952-912-3444
91004606
© 2023 Digi International Inc. All rights reserved. All other trademarks are the property of their respective owners. A4/223