Belt Conveyor

Product
Handbook
EFFECTIVE APRIL 1, 2018
BCPPHB
Belt Conveyor
Products
Av. Jorge Alessandri 11.500 – Edificio 7

Megacentro San Bernardo, San Bernardo, Santiago, Chile
Teléfono: 56-2-2896-7870
Correo electrónico: [email protected]
www.flexco.com
ii
iii
iv
Table of Contents
Belt Cleaners
Belt Cleaner Information and Selection Guide.........................................................................................................page 6
Precleaners
EZP1 Standard, Twist Tensioner and Hi-Temp Precleaners; ConShear™ Replacement Blades................................................. page 11
EZP-LS Limited Space Precleaner........................................................................................................................................................ page 24
MSP Standard Mine-Duty Precleaner & ConShear™ Replacement Blades.................................................................................. page 33
MMP Medium Mine-Duty Precleaner & TuffShear™ Replacement Blades................................................................................... page 39
MHP Heavy Mine-Duty Precleaner & MegaShear™ Replacement Blades................................................................................... page 47
MHCP Heavy-Duty Cartridge Precleaner & SuperShear™ Replacement Blades......................................................................... page 54
MXP Extreme-Duty Precleaner & UltraShear™ Replacement Blades............................................................................................ page 59
H-Type® Precleaners............................................................................................................................................................................... page 63
Secondary Cleaners
EZS2 Secondary Cleaners...................................................................................................................................................................... page 74
Y-Type™ Secondary Cleaners................................................................................................................................................................. page 78
P-Type® & P-Type LS (Limited Space) Secondary Cleaners............................................................................................................ page 86
R-Type® Reversing Secondary Cleaners............................................................................................................................................. page 90
FMS Medium-Duty Secondary Cleaner............................................................................................................................................... page 93
MHS HD Secondary Cleaners............................................................................................................................................................... page 96
P-Type® Secondary Cleaners with Enhanced Service Advantage™ Cartridge........................................................................... page 106
R-Type® Secondary Cleaners with Enhanced Service Advantage™ Cartridge........................................................................... page 110
MHS HD Secondary Cleaners with Enhanced Service Advantage™ Cartridge.......................................................................... page 114
MHS HD Secondary Cleaners with Service Advantage™ Cartridge–Legacy Replacement Parts.......................................... page 121
U-Type® Secondary Cleaners.............................................................................................................................................................. page 118
MDWS DryWipe Secondary Cleaner................................................................................................................................................. page 123
Motorized Brush Cleaner..................................................................................................................................................................... page 127
Chevron Belt Cleaner............................................................................................................................................................................ page 130
Optional Mounting Kits and Accessories
Optional Mounting Kits......................................................................................................................................................................... page 131
Spring Tensioner Accessories............................................................................................................................................................ page 132
Belt Cleaner Accessories
Inspection Door...................................................................................................................................................................................... page 133
Spray Pole Systems............................................................................................................................................................................... page 135
Stabilizing Roller Bracket Kits............................................................................................................................................................. page 136
Live-Shaft Hold-down Rollers.............................................................................................................................................................. page 137
Optional Installation Tools.................................................................................................................................................................... page 138
Legacy Belt Cleaner Parts–H-Type® and I-Type™............................................................................................................................. page 139
Replacement Blades for Other OEM Cleaners
ConShear™ Replacement Blades for Other OEM Cleaners.................................................................................page 141
Martin Engineering................................................................................................................................................................................ page 143
Arch/Gordon........................................................................................................................................................................................... page 147
Superior Exterra®................................................................................................................................................................................... page 149
ASGCO..................................................................................................................................................................................................... page 150
Argonics.................................................................................................................................................................................................. page 151
Stephens-Adamson Metso/Trellex..................................................................................................................................................... page 152
Martin Engineering Durt Hawg®......................................................................................................................................................... page 153
Martin Engineering Durt Tracker®...................................................................................................................................................... page 154
Belt Plows
V-Plows and Diagonal Plows............................................................................................................................................................... page 156
Impact Beds
Flexco Slider and Impact Beds................................................................................................................................page 160
EZSB-C & EZSB-I Slider Beds; EZIB-L & EZIB-M Impact Beds; Modular Impact Beds; Adjustable Idler Sets.................... page 161
DRX® Impact Beds......................................................................................................................................................page 179
DRX200, DRX750 and DRX1500 Impact Beds; DRX3000 Dynamic Bed.......................................................................................... page 180
Optional Parts and Tools....................................................................................................................................................................... page 188
Belt Positioners and Trainers
Belt Positioner™, PTEZ™, PT Smart™, PT Pro™ and PT Max™........................................................................................................... page 190
Skirting Systems
Standard Urethane Skirting; Skirt Clamps–RMC1, Flex-Lok™ and FlexSeal™.............................................................................. page 208
Belt Maintenance Tools
Flex-Lifter™, Flexco® Belt Cutters, and Far-Pul® HD® Belt Clamps................................................................................................ page 212
Pulley Lagging
Flex-Lag® Rubber, Full Ceramic, Medium Ceramic, Adhesives, Weld-on™ Rubber, Weld-on™ Ceramic................................. page 214
Index.....................................................................................................................................................page 220
5
Belt Cleaner Information and Selection Guide
Why Are Belt Cleaners Needed?

• Saves Money
Increases belt wear life.
Extends life of rollers, pulleys and splices.
High cost of accidents.
• Reduces Maintenance Costs

Minimizes manual cleanup.
Protects against belt mistracking.
Reduces conveyor component replacement costs.
Reducing carryback from 3% to 1% means a
67% reduction in maintenance costs.
• Keeps Conveyors Running Efficiently

and Consistently
Reduces unscheduled downtime.
Increases production uptime.
• Improves Safety
Reduces housekeeping problems.
42% of conveyor-related accidents happen while
maintenance tasks are being done.
Types of Belt Cleaners Precleaner

• Precleaners location range
Mounted on the head pulley.
Mounted below the material flow.
Blade is always narrower than the belt width.
Ideally, the blade covers just the belt's material path. Secondary Cleaner
Removes the big stuff. Typically cleans off up to 80% of the initial carryback. location range
• Secondary Cleaners
Located just past where the belt leaves the head pulley and anywhere down the beltline.
Special secondaries may allow for mounting under the head pulley.
Blade width is always the belt width or wider.
Removes sticky fines – the final cleaning job.
Cleaning efficiencies can be 90% +.
May require a hold-down roller for maximum performance.
• Specialty Cleaners
Precleaners or Secondaries designed especially for specific or extreme applications.
Definition of Terms
• Carryback - Material that sticks to the belt after it leaves the transfer point and continues
falling off along the conveyor's return side.
• Material Path - The section of the belt where most of the material is conveyed. Typically the
center 2/3 of the belt.
• Hold-Down Roller - A stabilizing roller or pressure roller located on top of the return side
of the belt to prevent belt flap or to provide a consistent flat surface for the blades on a lighter-
tensioned belt.
6
Types of Cleaner Blades
Precleaner options Secondary options
C-Tip P V-Tip R V-Tip

U F-Blade
HXF2
DryWipe
Blade
ConShear™ ConShear™ TuffShear™ MegaShear™ SuperShear™ Y-Type™ Y-Type™
LS H V-Tip H Protected V-Tip U C/V-Blade
Urethane (SD & HD) Carbide (SD & HD)
F-Tip/Blade - for mechanically fastened belts V-Tip/Blade - for vulcanized belts only C-Tip/Blade - for both
Polyurethane Blades
Not all polyurethanes are the same. Flexco's polyurethane blades are specially formulated for abrasion resistance and long wear.
Independent testing has shown that Flexco's polyurethane blades last as much as 30% longer than other OEM blades.
• Easy on the belt.
• Work well with mechanical splices.
• Economical.
• Specialty formulations for high heat, chemical resistance,
or water removal. Less advanced polyurethane formulations
result in blades that experience quicker
wear and provide less-efficient cleaning.
Tungsten Carbide
Excellent for superior cleaning efficiency and long wear. The quality and application of carbides can vary. Flexco has invested
years of research and testing to develop tungsten carbide tips for both vulcanized and mechanically fastened belts. And a quality
process ensures consistent results.
• Superior cleaning. Poor quality carbide wears
• Long wear. unevenly, with high points.
• C-Tips/blades for mechanical splices and
V-Tips/blades for vulcanized belts.
The “Material Path” Option (for Precleaners)

For optimal cleaning and reduced blade retensioning, the cleaner blade width should be sized to fit the material path of the belt.
The material path is typically the center 2/3 of the belt width. Choosing a blade only slightly wider than the material path can
decrease differential blade wear which reduces blade retensioning maintenance, as well as reducing the frequency of blade
replacement.
Match blade width to belt’s material path

Belt Width Minus 2" (50mm) Belt Width Minus 8" (200mm) Belt Width Minus 14" (350mm)
Material Path Material Path Material Path
Belt Width Belt Width Belt Width
Blade Width Blade Width Blade Width
Blade Angle (Secondary Cleaners)

Belt Direction 1. Aggressive - excellent cleanability, high risk for belt damage.
2. 90º to belt - good cleaning efficiency; must have good blade
relief for splices.
3. Wiping - a little less cleaning power; safer on belts in poor
condition or with poor mechanical splices.
1 2 3
7
Belt Cleaning Systems
Many applications will require more than one belt cleaner to do a satisfactory cleaining job. A typical system includes a
precleaner (to knock off the initial flow of carryback), one or more secondary cleaners (to take off the sticky fines) and many
times, a final specialty cleaner (to remove the water).
Keys to Good Belt Cleaning

• Proper cleaner selection for the application
• Correct installation
• Regular service maintenance
Spec'ing and Ordering Belt Cleaners

Information needed:
A. Belt width
B. Conveyor frame (structure) width
C. Head pulley diameter
D. For precleaners - what is the belt's material path
E. Material conveyed (dry, wet, sticky, etc.)
F. Type of belt splice:
Mechanical - skived or unskived
Vulcanized
G. Temperature or other extreme environmental factors
H. Does the belt reverse
8
Precleaner Selection Guide
PRECLEANER SPECIFICATION CHART
Application Description EZP-LS EZP1 MSP MMP MHP MHCP MXP
12" - 60" 12" - 72" 24" - 84" 24" - 96" 24" - 96" 24" - 96" 42" - 120"
Belt Width*
(300 - 1500mm) (300 - 1800mm) (600 - 2100mm) (600 - 2400mm) (600 - 2400mm) (600 - 2400mm) (1050 - 3000mm)
Belt Speed 500fpm (2.5m/s) 700fpm (3.5m/s) 700fpm (3.5m/s) 1000fpm (5m/s) 1500fpm (7.5m/s) 1200fpm (6m/s) 2000fpm (10m/s)
6" - 22" 10" - 36" 16" - 42" 16" - 48" 20" - 84" 20" - 84" 48" - 96"
Head Pulley Diameter
(150 - 550mm) (250 - 900mm) (400 - 1050mm) (400 - 1200mm) (500 - 2100mm) (500 - 2100mm) (1200 - 2400mm)
Reversing Belts Yes Yes Yes Yes Yes Yes Yes
Mechanical Fasteners Yes Yes Yes Yes Yes Yes Yes
PRECLEANER SPECIFICATION CHART (cont.)

H-Type® H-Type® High Temp HV2
Application Description (XF2- & XF-Tips) (V-Tips) (V-Tips) (V-Tips)
18" - 72" 18" - 72" 18" - 48" 18" - 72"
Belt Width*
(450 - 1800mm) (450 - 1800mm) (450 - 1200mm) (450 - 1800mm)
Belt Speed 1000fpm (5m/s) 1000fpm (5m/s) 1000fpm (5m/s) 1500fpm (7.5m/s)
10" - 47" 10" - 67" 8" - 35" 10" - 67"
Head Pulley Diameter
(250 - 1175mm) (250 - 1675mm) (200 - 875mm) (250 - 1675mm)
Reversing Belts Yes Yes Yes Yes
Mechanical Fasteners Yes No No No
*Special sizes available upon request.
PRECLEANER BLADE SPECIFICATIONS
ConShear™ ConShear™
LS White White
(Chemical (Chemical
ConShear™ LS Resistant/Food ConShear Resistant/Food TuffShear™
Blade Type ConShear LS High Temp
™
Grade) ‡ ConShear™ High Temp Grade) ‡ TuffShear™ High Temp MegaShear™ SuperShear™
500fpm 500fpm 500fpm 700fpm 700fpm 700fpm 1000fpm 1000fpm 1500fpm 1200fpm
Belt Speed (2.5m/s) (2.5m/s) (2.5m/s) (3.5m/s) (3.5m/s) (3.5m/s) (5m/s) (5m/s) (7.5m/s) (6m/s)
up to up to up to up to up to
-30 to 180°F 275°F (135°C) -30 to 180°F -30 to 180°F 275°F (135°C) -30 to 180°F -30 to 180°F 275°F (135°C) 275°F (135°C) 275°F (135°C)
Temperature (-35 to 82°C) with spikes to (-35 to 82°C) (-35 to 82°C) with spikes to (-35 to 82°C) (-35 to 82°C) with spikes to with spikes to with spikes to
Range 325°F (163°C) 325°F (163°C) 325°F (163°C) 325°F (163°C) 325°F (163°C)
Polyurethane Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Durometer 83 93 83 83 93 83 83 93 93 93
Tungsten
No No No No No No No No No No
Carbide
Work with
Mechanical Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Fasteners
‡ All ingredients used in the polyurethane formulation of this blade comply with the relevant requirements
of 21 CFR (FDA Code of Federal Regulations) for use in repeated bulk dry food applications
PRECLEANER BLADE SPECIFICATIONS
H Protected Protected
Blade Type UltraShear™ HXF HXF2 H V-Tip V-Tip HV2 Tip HV2 Tip
2000fpm 700fpm 700fpm 1000fpm 1000fpm 1500fpm 1500fpm
Belt Speed (10m/s) (3.5m/s) (3.5m/s) (5m/s) (5m/s) (7.5m/s) (7.5m/s)
-30 to 275°F -30 to 180°F -30 to 180°F -30 to 400°F -30 to 400°F -30 to 400°F -30 to 400°F
Temperature Range (-35 to 185°C) (-35 to 82°C) (-35 to 82°C) (-35 to 205°C) (-35 to 205°C) (-35 to 205°C) (-35 to 205°C)
Polyurethane Yes Yes Yes No No No No
Durometer 93 84 83 N/A N/A N/A N/A
Tungsten Carbide No No No Yes Yes Yes Yes
Work with Mechanical Fasteners Yes Yes Yes No No No No
9
Secondary Cleaner Selection Guide
SECONDARY CLEANER SPECIFICATION CHART

Application Y-Type SD Y-Type SD Y-Type HD Y-Type HD EZS2 FMS MHS MHS
Description Polyurethane Carbide Polyurethane Carbide EZS2 High Temp (C-Tip) (C-Tip) (V-Tip) MDWS
18" - 48" 18" - 48" 36" - 72" 36" - 72" 36" - 72" 36" - 72" 36" - 72" 24" - 96" 24" - 96" 24" - 96"
Belt Width*
(450 - 1200mm) (450 - 1200mm) (900 - 1800mm) (900 - 1800mm) (900 - 1800mm) (900 - 1800mm) (900 - 1800mm) (600 - 2400mm) (600 - 2400mm) (600 - 2400mm)
600fpm 600fpm 750fpm 750fpm 700fpm 700fpm 1000fpm 1200fpm 1200fpm 1000fpm
Belt Speed
(3m/s) (3m/s) (3.8m/s) (3.8m/s) (3.5m/s) (3.5m/s) (5m/s) (6m/s) (6m/s) (5m/s)
Reversing Belts Yes Yes Yes Yes No No No Yes Yes Yes
Works with
Mechanical Yes Yes Yes Yes Yes Yes Yes Yes No Yes
Fasteners
SECONDARY CLEANER SPECIFICATION CHART (cont.)

Application P-Type® P-Type U-Type® U-Type U-Type R-Type® R-Type
Description (C-Tip) (V-Tip) (F-Blade) (C-Blade) (V-Blade) (C-Tip) (V-Tip) Chevron Brush Cleaner
18" - 72" 18" - 72" 18" - 84" 18" - 84" 18" - 84" 18" - 72" 18" - 72" 18" - 60" 18" - 84"
Belt Width*
(450 - 1800mm) (450 - 1800mm) (450 - 2100mm) (450 - 2100mm) (450 - 2100mm) (450 - 1800mm) (450 - 1800mm) (450 - 1500mm) (450 - 2100mm)
1000fpm 1000fpm 1000fpm 1300fpm 1300fpm 1000fpm 1000fpm 500fpm 700fpm
Belt Speed
(5m/s) (5m/s) (5m/s) (6.6m/s) (6.6m/s) (5m/s) (5m/s) (2.5m/s) (3.5m/s)
Reversing Belts No No No No No Yes Yes Yes No
Works with
Mechanical Yes No Yes Yes No Yes No Yes Yes
Fasteners
SECONDARY CLEANER BLADE SPECIFICATIONS
Y-Type Y-Type
Y-Type DryWipe Brush
Blade Type C-Tip P V-Tip R V-Tip Polyurethane Polyurethane U F-Blade U C-Blade U V-Blade Chevron
Carbide Blade Cleaner
(Purple) (White)
Temperature -30 to 400°F -30 to 400°F -30 to 400°F -30 to 180°F -30 to 180°F -30 to 180°F -30 to 180°F -30 to 180°F -30 to 180°F -30 to 180°F -30 to 180°F -20 to 180°F
Range (-35 to 205°C) (-35 to 205°C) (-35 to 205°C) (-35 to 82°C) (-35 to 82°C) (-35 to 82°C) (-35 to 82°C) (-35 to 82°C) (-35 to 82°C) (-35 to 82°C) (-35 to 82°C) (-30 to 82°C)
Poly-
Polyurethane No No No Yes Yes No Yes Yes Rubber Rubber Rubber
propylene
Durometer N/A N/A N/A 86A 83A N/A 59 90 84 83 N/A N/A
Tungsten
Yes Yes Yes No No Yes No No Yes Yes No No
Carbide
Works with
Mechanical Yes No No Yes Yes Yes Yes Yes Yes No Yes Yes
Fasteners
10
Product Ordering EZP1
Standard Duty Precleaner
Information
EZP1 Precleaner
Belt Width Minus 2" (50mm)
BELT WIDTH BLADE WIDTH ORDERING ITEM WT.
in. mm in. mm NUMBER CODE LBS.
12 300 10 250 EZP1-212 75610 49.4
18 450 16 400 EZP1-218 75611 55.3
24 600 22 550 EZP1-224 75612 61.2
30 750 28 700 EZP1-230 75613 67.1
36 900 34 850 EZP1-236 75614 73.0
42 1050 40 1000 EZP1-242 75615 78.9
48 1200 46 1150 EZP1-248 75616 84.8 Match blade width to belt’s material path
54 1350 52 1300 EZP1-254 75617 90.7
60 1500 58 1450 EZP1-260 75618 96.6
72 1800 70 1750 EZP1-272 75771 102.5 Material Path
Belt Width
Blade Width
EZP1 Precleaner
in. mm in. mm NUMBER CODE LBS. Belt Width Minus 8" (200mm)
12 300 – – N/A N/A – Material Path
18 450 10 250 EZP1-818 75779 51.3
24 600 16 400 EZP1-824 75780 57.2 Belt Width
30 750 22 550 EZP1-830 75781 63.1
36 900 28 700 EZP1-836 75782 69.0 Blade Width
42 1050 34 850 EZP1-842 75783 74.9
48 1200 40 1000 EZP1-848 75784 80.8
54 1350 46 1150 EZP1-854 75785 86.7
60 1500 52 1300 EZP1-860 75786 92.6
72 1800 64 1600 EZP1-872 75774 98.5
Product Notes:
• For optimal cleaning and reduced blade retensioning maintenance, the cleaner blade width should be sized to fit the
material path of the belt. The material path is typically 2/3 of the belt width. In most cases a blade size of belt width minus 8"
(200mm) may be the best selection.
• Each cleaner can be retrofitted with three replacement blade sizes (belt width minus 2" (50mm), minus 8" (200mm), or minus
14" (350mm)).
• Comes complete with universal mounting plates and tensioner.
• Visual tension check. No guesswork on blade tensioning. Simply measure the spring, check label on tensioner and turn
adjusting nut to restore optimal tension.
• Works with mechanical splices. Polyurethane blade glides over splices.
• Compatible with reversing belts.
• For replacement parts see the EZP1 Parts List on page 18.
• For applications requiring longer pole lengths, go to the minus 8" (200mm) chart and select the cleaner one belt width size
larger. This will provide a pole 6" (150mm) longer and a blade size of belt width minus 2" (50mm).
U.S. Patent No. D482,508S
www.flexco.com • phone: 56-2-2896-2870 11

P R O D U C T H A N D B O O K
Product Ordering EZP1T
Twist Tensioner Precleaner
Information
EZP1T Precleaner with Twist Tensioner

12 300 10 250 EZP1T-212 78488 38.5
18 450 16 400 EZP1T-218 78489 44.5
24 600 22 550 EZP1T-224 78490 50.5
30 750 28 700 EZP1T-230 78491 56.5
36 900 34 850 EZP1T-236 78492 62.5
42 1050 40 1000 EZP1T-242 78493 68.4
48 1200 46 1150 EZP1T-248 78494 74.4
54 1350 52 1300 EZP1T-254 78495 83.7 Match blade width to belt’s material path
60 1500 58 1450 EZP1T-260 78496 92.0
72 1800 70 1750 EZP1T-272 78497 101.6 Belt Width Minus 2" (50mm)
Material Path
Belt Width
EZP1T Precleaner with Twist Tensioner Blade Width

12 300 – – N/A N/A –
18 450 10 250 EZP1T-818 78498 41.8
Material Path
24 600 16 400 EZP1T-824 78499 47.8 Belt Width
30 750 22 550 EZP1T-830 78500 53.8
36 900 28 700 EZP1T-836 78501 59.8
42 1050 34 850 EZP1T-842 78502 65.8 Blade Width
48 1200 40 1000 EZP1T-848 78503 71.7
54 1350 46 1150 EZP1T-854 78504 78.5
60 1500 52 1300 EZP1T-860 78505 87.0
72 1800 64 1600 EZP1T-872 78506 98.9
Product Notes:
material path of the belt. The material path is typically 2/3 of the belt width. In most cases a blade size of belt width
minus 8" (200mm) may be the best selection.
• Each cleaner can be retrofitted with three replacement blade sizes (belt width minus 2" (50mm), minus 8" (200mm), or
minus 14" (350mm)).
• Visual tension check. No guesswork on blade tensioning. Simply measure the spring, check label on tensioner and
turn adjusting nut to restore optimal tension.
• For replacement parts see the EZP1T Parts List on page 19.
• For applications requiring longer pole lengths, go to the minus 8" (200mm) chart and select the cleaner one
belt width size larger. This will provide a pole 6" (150mm) longer and a blade size of belt width minus 2" (50mm).
12 P R O D U C T H A N D B O O K
www.flexco.com • phone: 56-2-2896-2870
Product Ordering High Temp EZP1
High Temperature Precleaner
Information
ConShear™ High Temp Precleaners

12 300 10 250 HTF212 76658 49.4
18 450 16 400 HTF218 76659 55.3
24 600 22 550 HTF224 76660 61.2
30 750 28 700 HTF230 76661 67.1
36 900 34 850 HTF236 76662 73.0
42 1050 40 1000 HTF242 76663 78.9
48 1200 46 1150 HTF248 76664 84.8
54 1350 52 1300 HTF254 76665 90.7
60 1500 58 1450 HTF260 76666 96.6
72 1800 70 1750 HTF272 76667 102.5
Pole Diameter - 2-3/8" (60mm)

Material Path
Belt Width
Blade Width
Product Notes:
• The High-Temp ConShear Precleaner works in temperatures up to 275°F (135°C) with spikes to 325°F (164°C).
• Visual tension check. No guesswork on blade tensioning. Simply measure the spring, check label on
tensioner and turn adjusting nut to restore optimal tension.

Product Ordering EZP1
Precleaner with
Information White ConShear™ Blade
EZP1 Precleaner - Mild Steel

with White ConShear™ blade
12 300 10 250 EZP1-212W 78934 49.4
18 450 16 400 EZP1-218W 78935 55.3
24 600 22 550 EZP1-224W 78936 61.2
30 750 28 700 EZP1-230W 78937 67.1
36 900 34 850 EZP1-236W 78938 73.0
42 1050 40 1000 EZP1-242W 78939 78.9
48 1200 46 1150 EZP1-248W 78940 84.8
54 1350 52 1300 EZP1-254W 78941 90.7
60 1500 58 1450 EZP1-260W 78942 96.6
Material Path
Belt Width
Blade Width
Product Notes:
• All ingredients used in polyurethane formulation comply with the relevant requirements of 21 CFR (FDA Code of
Federal Regulations) for use in repeated bulk dry food applications.
• Visual tension check. No guesswork on blade tensioning. Simply measure the spring, check label on tensioner and
turn adjusting nut to restore optimal tension.
ConShear™ EZP1
Replacement Blades
Blade Width Selection
BELT WIDTH BELT WIDTH BELT WIDTH
BELT WIDTH - 2" (50mm) - 8" (200mm) - 14" (350mm)
in. mm in. mm in. mm in. mm
12 300 10 250 N/A N/A N/A N/A
18 450 16 400 10 250 N/A N/A
24 600 22 550 16 400 10 250
30 750 28 700 22 550 16 400 Replacement
36 900 34 850 28 700 22 550 High Temp ConShear™ Blades
42 1050 40 1000 34 850 28 700 (Color Identification: Yellow)
48 1200 46 1150 40 1000 34 850 BLADE WIDTH ORDERING ITEM WT.
54 1350 52 1300 46 1150 40 1000 in. mm NUMBER CODE LBS.
60 1500 58 1450 52 1300 46 1150 10 250 CRB-HT10 76593 4.8
72 1800 70 1600 64 1600 58 1450 16 400 CRB-HT16 76594 7.6
22 550 CRB-HT22 76595 10.4
28 700 CRB-HT28 76596 13.2
Replacement ConShear™ Blades 34 850 CRB-HT34 76597 16.2
40 1000 CRB-HT40 76598 19.1
BLADE WIDTH ORDERING ITEM WT. 46 1150 CRB-HT46 76599 21.9
in. mm NUMBER CODE LBS. 52 1300 CRB-HT52 76600 24.8
10 250 CRB10 75628 4.6 58 1450 CRB-HT58 76601 27.6
16 400 CRB16 75629 7.3 64 1600 CRB-HT64 76602 30.5
22 550 CRB22 75630 10.1 70 1750 CRB-HT70 76603 33.4
28 700 CRB28 75631 12.8
34 850 CRB34 75632 15.5
40 1000 CRB40 75633 18.3 Replacement White ConShear™
46 1150 CRB46 75634 21.0 Blades (Chemical Resistant/Food Grade) ‡
52 1300 CRB52 75635 23.8
BLADE WIDTH ORDERING ITEM WT.
58 1450 CRB58 75636 26.5
in. mm NUMBER CODE LBS.
64 1600 CRB64 75775 29.2
10 250 CRB-W10 78471 4.8
70 1750 CRB70 75773 32.0
16 400 CRB-W16 78472 7.6
76 1900 CRB76 76940 34.7
22 550 CRB-W22 78473 10.4
82 2050 CRB82 76941 37.5
28 700 CRB-W28 78474 13.2
Other blade sizes available upon request.
34 850 CRB-W34 78475 16.2
40 1000 CRB-W40 78476 19.1
46 1150 CRB-W46 78477 21.9
52 1300 CRB-W52 78478 24.8
58 1450 CRB-W58 78479 27.6
‡ All ingredients used in the polyurethane formulation of this blade comply with
the relevant requirements of 21 CFR (FDA Code of Federal Regulations) for use in
repeated bulk dry food applications
Product Notes:
• Take blade width and ordering number from the worn blade and use the Replacement Blade Chart.
• For optimal cleaning and reduced blade retensioning maintenance, the cleaner blade width should be sized to fit the material path of
the belt. The material path is typically 2/3 of the belt width. In most cases a blade size of belt width minus 8" (200mm) may be the best
selection.
• The ConShear™ blade has a faceted profile that renews the cleaning edge as it wears.
• ConShear blades are made of a special long-wearing polyurethane.
• A molded-in blade wear line indicates when the blade is worn out and needs to be replaced.
• Blade replacement is quick. Pull one pin, remove the old blade and slide the new one in. U.S. Patent No. D482,508S

Specifications EZP1 & EZP1T
Standard Duty Precleaners
& Guidelines
Pole Length Specifications
MAXIMUM
CLEANER SIZE POLE LENGTH CONVEYOR SPAN
*
in. mm in. mm in. mm
12 300 42 1050 37 925
18 450 48 1200 43 1075
24 600 54 1350 49 1225 Max Conveyor Span
30 750 60 1500 55 1375
Pole Length
36 900 66 1650 61 1525
*Each pole size can be used with a blade size either belt width minus 2" (50mm),
42 1050 72 1800 67 1675
belt width minus 8" (200mm), or belt width minus 14" (350mm).
48 1200 78 1950 73 1825
54 1350 88 2200 83 2075
60 1500 94 2350 89 2225
72 1800 106 2650 101 2525
Clearance Guidelines for

Installation Vertical
HORIZONTAL VERTICAL
CLEARANCE CLEARANCE
REQUIRED REQUIRED
in. mm in. mm
4 100 9 1/2 238
Horizontal
Spring Length Chart

with EST Spring Tensioner Twist Tensioner Chart
BLADE PURPLE SILVER BLACK BLADE
WIDTH HEAVY
WIDTH SPRING SPRING SPRING STANDARD
DUTY
in. mm in. mm in. mm in. mm in. mm
10 250 5 3/4 146 6 1/4 159 N/A N/A 10" 250 8 6
16 400 5 1/4 133 6 152 N/A N/A 16" 400 13 9
Top of
22 550 4 3/4 121 5 7/8 149 N/A N/A 22" 550 18 12
washer to top
28 700 4 1/4 108 5 5/8 143 N/A N/A 28" 700 23 16
of torque arm
34 850 N/A N/A 5 3/8 137 5 5/8 143 34" 850 27 19
40 1000 N/A N/A 5 1/8 130 5 1/2 140 40" 1000 32 23
46 1150 N/A N/A 5 127 5 1/4 133 46" 1150 37 26
52 1300 N/A N/A 4 3/4 121 5 1/8 130 52" 1300 N/A 29
58 1450 N/A N/A N/A N/A 5 127 58" 1450 N/A 33
64 1600 N/A N/A N/A N/A 4 3/4 121 64" 1600 N/A 36
70 1750 N/A N/A N/A N/A 4 5/8 117 70" 1750 N/A 40
Shading indicates preferred spring option
Specifications EZP1 & EZP1T
Standard Duty Precleaners
& Guidelines
Pole Location Pole Location

Chart IMPERIAL Chart METRIC Pole Location Specs
A X Y C A X Y C
10 3 9 9 1/2 250 74 230 242
11 3 3/4 9 9 3/4 275 92 230 248
12 4 3/8 9 10 300 108 230 254
13 5 3/8 9 10 1/2 325 131 230 265
A X
14 5 7/8 9 10 3/4 350 146 230 273
15 6 3/8 9 11 1/4 375 166 230 284 Y
16 7 1/8 9 11 1/2 400 179 230 291 C
425 195 230 301
Move Dim. C
17 7 7/8 9 12
450 207 230 309
on arc
18 8 1/4 9 12 1/4
19 9 9 12 3/4 475 223 230 320
A = Pulley Diameter + Lagging and Belt
20 9 3/8 9 13 500 235 230 329
C = Critical Spec to move location if necessary
21 10 9 13 1/2 525 249 230 339
22 10 3/4 9 14 550 266 230 352
23 11 3/8 9 14 1/2 575 283 230 365
24 12 9 15 600 299 230 377
25 12 5/8 9 15 1/2 625 314 230 390
26 13 1/4 9 16 650 330 230 402
27 13 7/8 9 16 1/2 675 346 230 415
28 14 3/8 9 17 700 360 230 427
29 15 9 17 1/2 725 374 230 439
30 15 5/8 9 18 750 389 230 452
31 16 1/8 9 18 1/2 775 403 230 464
32 16 3/4 9 19 800 417 230 477
33 17 1/4 9 19 1/2 825 432 230 489
34 17 7/8 9 20 850 446 230 501
35 18 3/8 9 20 1/2 875 460 230 514
36 19 9 21 900 474 230 526
Specifications:
• Maximum Belt Speed......................................................700 FPM (3.5m/s)
• Temperature Rating (ConShear, ConShear White).....-30°F to 180°F (-35°C to 82°C)
• Temperature Rating (ConShear High Temp)................Up to 275°F (135°C) with spikes to 325°F (164°C)
• Minimum Pulley Diameter..............................................10" (250mm)
• Blade Height.....................................................................7-1/4" (185mm)
• Usable Blade Wear Length............................................4" (100mm)
• Blade Material..................................................................Polyurethane (proprietary blend for abrasion
............................................................................................resistance and long wear)
• Available for Belt Widths................................................12" to 72" (300 to 1800mm)
• CEMA Cleaner Rating......................................................Class 2

Replacement EZP1
Parts List
14
Detail view 15
9 of Item 10
(hidden)
13a
2 13
1
11
10
7
4 7a
Spring Tensioner Selection Chart
8
76403 76404 76405 12
CLEANER BLADE WIDTH EST-P EST-S EST-B 8a
5 3 Optional Spring Tensioner
ConShear 12" - 28" (300 - 700mm) X 6 8b
ConShear 34" - 52" (850 - 1300mm) X
ConShear 58" - 70" (1450 - 1750mm) X
Replacement Parts Optional Spring Tensioner & Parts

ORDERING ITEM WT. ORDERING ITEM WT.
REF DESCRIPTION NUMBER CODE LBS. REF DESCRIPTION NUMBER CODE LBS.
12" (300mm) Pole EZP1P12 75619 17.4 11 Jam Nut Kit, EST Tensioner JNK-A 79891 0.3
18" (450mm) Pole EZP1P18 75620 20.3 12 Tension Arm Kit* (1 ea.) HAR-K 78786 6.0
24" (600mm) Pole EZP1P24 75621 22.7 Tension Spring (1 ea.)
13 STTS 74419 1.4
30" (750mm) Pole EZP1P30 75622 26.5 for sizes 12" - 30" (300 - 750mm)
36" (900mm) Pole EZP1P36 75623 30.4 HD Tension Spring (1 ea.)
1 13a HDTS 74502 2.0
for sizes 36" - 72" (900 - 1800mm)
42" (1050mm) Pole EZP1P42 75624 32.7
14 Spring Tension J-Bolt Mount (1 ea.) STJM 74775 3.0
48" (1200mm) Pole EZP1P48 75625 35.3
15 J-Bolt Kit* (1 ea.) STJK 74417 0.7
54" (1350mm) Pole EZP1P54 75626 39.2
Optional Spring Tensioner Kit*
60" (1500mm) Pole EZP1P60 75627 43.3 – EZP1OTK1 76418 11.2
for sizes 12" - 30" (300 - 750mm)
72" (1800mm) Pole EZP1P72 75772 48.2
Optional Spring Tensioner Kit*
2 Mounting Plate Kit* (2 ea.) EZP1MPK 75637 7.7 – EZP1OTK2 76419 11.8
for sizes 36" - 72" (900 - 1800mm)
3 Torque Arm Kit* (1 ea.) ESTAK-EST 76406 3.6 * Hardware Included
4 Pivot Shaft Bracket Kit* (1 ea.) ESPSBK 76407 1.8
5 Pivot Block Kit* ESPBK 76408 0.7
6 Pivot Rod Kit* ESPRK 76409 1.2
Bushing Kit - Purple and Silver
7 ESBK-PS 76410 0.1
(includes 2 bushings)
Bushing Kit - Black
7a ESBK-B 76411 0.1
8 Tension Spring - Purple QMTS-P 75845 1.0
8a Tension Spring - Silver ESS-S 76412 1.2
8b Tension Spring - Black ESS-B 76413 1.4
9 Pole Lock* (1 ea.) EZP1PL 75641 1.1
EST Tensioner - Purple*
– for blade widths 12" - 28" (300 - 700mm) EST-P 76403 7.7
(includes 1 each items 3, 4, 5, 6, 7 & 8)
EST Tensioner - Silver*
– for blade widths 34" - 52" (850 - 1300mm) EST-S 76404 7.9
(includes 1 each items 3, 4, 5, 6, 7 & 8a)
EST Tensioner - Black*
– for blade widths 58" - 70" (1450 - 1750mm) EST-B 76405 8.1
(includes 1 each items 3, 4, 5, 6, 7a& 8b)
10 Blade Pin (1 ea.) EZP1BP 75642 0.1
*Hardware Included
Replacement EZP1T
Twist Tensioner Precleaner
Parts List
Detail view of
7 Item 7
6
(hidden)
2
5a 4
5
Replacement Parts
ORDERING ITEM WT.
REF DESCRIPTION
NUMBER CODE LBS.
12" (300mm) Pole EZP1P12 75619 17.4 3
18" (450mm) Pole EZP1P18 75620 20.3
3a
24" (600mm) Pole EZP1P24 75621 22.7
30" (750mm) Pole EZP1P30 75622 26.5
36" (900mm) Pole EZP1P36 75623 30.4
1
42" (1050mm) Pole EZP1P42 75624 32.7
48" (1200mm) Pole EZP1P48 75625 35.3
54" (1350mm) Pole EZP1P54 75626 39.2
60" (1500mm) Pole EZP1P60 75627 43.3 Torsion Bar Tensioner Selection Chart
72" (1800mm) Pole EZP1P72 75772 48.2
77384 77385
2 Torsion Mounting Plate Kit* (2 ea.) EZPTMPK 78507 8.7 CLEANER BLADE WIDTH
EZPTBT EZPTBTHD
3 Torsion Cap Kit* (1 ea.) EZPTCK 78508 3.2 ConShear 12" - 48" (300 - 1200mm) X
(includes 1 ea. Item 4)
ConShear 54" - 72" (1350 - 1800mm) X
Torsion Cap Kit HD* (1 ea.)
3a EZPTCKHD 78509 3.2
(includes 1 ea. Item 4)
4 Torsion Shield EZPTSR 78510 .1
5 Torsion Spring Kit EZPTSK 78511 6.0
5a Torsion Spring Kit HD EZPTSKHD 78512 8.5
6 Pole Lock* (1 ea.) EZP1PL 75641 1.1
Torsion Bar Tensioner
– for blade widths 12" - 48" EZPTBT 77384 17.4
(300 - 1200mm)
(includes 1 each items 3, 4, & 5)
Torsion Bar Tensioner HD
– for blade widths 54" - 72" EZPTBTHD 77385 20.0
(1350 - 1800mm)
(includes 1 each items 3a, 4, & 5a)
7 Blade Pin (1 ea.) EZP1BP 75642 0.1
*Hardware Included

Product Ordering EZP1 Stainless Steel
Precleaner with
Information White ConShear™ Blade
EZP1 Stainless Steel Precleaner

with White ConShear Blade
12 300 10 250 CFG-212 78838 49.4
18 450 16 400 CFG-218 78839 55.3
24 600 22 550 CFG-224 78840 61.2
30 750 28 700 CFG-230 78841 67.1
36 900 34 850 CFG-236 78842 73.0
42 1050 40 1000 CFG-242 78843 78.9 Match blade width to belt’s material path
48 1200 46 1150 CFG-248 78844 84.8
54 1350 52 1300 CFG-254 78845 90.7 Belt Width Minus 2" (50mm)
60 1500 58 1450 CFG-260 78846 96.6
Material Path
Belt Width
EZP1 Stainless Steel Precleaner Blade Width
with White ConShear Blade
12 300 – – N/A N/A –
Material Path
18 450 10 250 CFG-818 78924 51.3
24 600 16 400 CFG-824 78925 57.2 Belt Width
30 750 22 550 CFG-830 78926 63.1
36 900 28 700 CFG-836 78927 69.0 Blade Width
42 1050 34 850 CFG-842 78928 74.9
48 1200 40 1000 CFG-848 78929 80.8
54 1350 46 1150 CFG-854 78930 86.7
60 1500 52 1300 CFG-860 78931 92.6
Product Notes:
• White food-grade ConShear Precleaner is chemical resistant and all ingredients used in polyurethane formulation comply
with the relevant requirements of 21 CFR (FDA Code of Federal Regulations) for use in repeated bulk dry food applications.
material path of the belt. The material path is typically 2/3 of the belt width. In most cases a blade size of belt width minus 8"
(200mm) may be the best selection.
• Each cleaner can be retrofitted with three replacement blade sizes (belt width minus 2" (50mm), minus 8" (200mm), or minus
14" (350mm)).
• For replacement parts see the EZP1 SS Parts List on page 23.
• For applications requiring longer pole lengths, go to the minus 8"(200mm) chart and select the cleaner one
ConShear™ EZP1
Replacement Blades

12 300 10 250 N/A N/A N/A N/A
18 450 16 400 10 250 N/A N/A
24 600 22 550 16 400 10 250 Replacement ConShear™ Blades
30 750 28 700 22 550 16 400
36 900 34 850 28 700 22 550
42 1050 40 1000 34 850 28 700
10 250 CRB10 75628 4.6
48 1200 46 1150 40 1000 34 850
16 400 CRB16 75629 7.3
54 1350 52 1300 46 1150 40 1000
22 550 CRB22 75630 10.1
60 1500 58 1450 52 1300 46 1150
28 700 CRB28 75631 12.8
72 1800 70 1600 64 1600 58 1450
34 850 CRB34 75632 15.5
40 1000 CRB40 75633 18.3
46 1150 CRB46 75634 21.0
Replacement White ConShear™ Blades 52 1300 CRB52 75635 23.8
(Chemical Resistant/Food Grade) ‡ 58 1450 CRB58 75636 26.5
BLADE WIDTH ORDERING ITEM WT. 64 1600 CRB64 75775 29.2
in. mm NUMBER CODE LBS. 70 1750 CRB70 75773 32.0
10 250 CRB-W10 78471 4.8 76 1900 CRB76 76940 34.7
16 400 CRB-W16 78472 7.6 82 2050 CRB82 76941 37.5
22 550 CRB-W22 78473 10.4 Other blade sizes available upon request.
28 700 CRB-W28 78474 13.2
34 850 CRB-W34 78475 16.2
40 1000 CRB-W40 78476 19.1
Replacement
46 1150 CRB-W46 78477 21.9 High Temp ConShear™ Blades
(Color Identification: Yellow)
52 1300 CRB-W52 78478 24.8
58 1450 CRB-W58 78479 27.6 BLADE WIDTH ORDERING ITEM WT.
‡ All ingredients used in the polyurethane formulation of this blade comply with in. mm NUMBER CODE LBS.
the relevant requirements of 21 CFR (FDA Code of Federal Regulations) for use in 10 250 CRB-HT10 76593 4.8
repeated bulk dry food applications 16 400 CRB-HT16 76594 7.6
22 550 CRB-HT22 76595 10.4
28 700 CRB-HT28 76596 13.2
34 850 CRB-HT34 76597 16.2
40 1000 CRB-HT40 76598 19.1
46 1150 CRB-HT46 76599 21.9
52 1300 CRB-HT52 76600 24.8
58 1450 CRB-HT58 76601 27.6
64 1600 CRB-HT64 76602 30.5
70 1750 CRB-HT70 76603 33.4
Product Notes:
• For optimal cleaning and reduced blade retensioning maintenance, the cleaner blade width should be sized to fit the material path of
the belt. The material path is typically 2/3 of the belt width. In most cases a blade size of belt width minus 8" (200mm) may be the best
selection.
• Blade replacement is quick. Pull one pin, remove the old blade and slide the new one in.
• For replacement parts see the EZP1SS Parts List on page 23.

Specifications EZP1 Stainless Steel
Precleaner with
& Guidelines White ConShear™ Blade

MAXIMUM *
CLEANER POLE
CONVEYOR
SIZE LENGTH
SPAN
12 300 42 1050 37 925
18 450 48 1200 43 1075
30 750 60 1500 55 1375 Pole Length
36 900 66 1650 61 1525 *Each pole size can be used with a blade size either belt
42 1050 72 1800 67 1675 width minus 2" (50mm), belt width minus 8" (200mm), or
48 1200 78 1950 73 1825 belt width minus 14" (350mm).
54 1350 88 2200 83 2075
60 1500 94 2350 89 2225 Pole Location Specs
Clearance Guidelines A X
For Installation
HORIZONTAL VERTICAL Vertical Y
C
CLEARANCE CLEARANCE Move Dim. C
REQUIRED REQUIRED on arc
in. mm in. mm
4 100 9 1/2 238 A = Pulley Diameter + Lagging and Belt
Horizontal
Pole Location Chart Pole Location Chart
Spring Length Chart IMPERIAL METRIC
BLADE PURPLE WHITE GOLD A X Y C A X Y C
WIDTH SPRING SPRING SPRING 10 3 9 9 1/2 250 74 230 242
in. mm in. mm in. mm in. mm 11 3 3/4 9 9 3/4 275 92 230 248
10 250 5 5/8 143 6 3/8 162 N/A N/A 12 4 3/8 9 10 300 108 230 254
16 400 5 127 6 1/8 156 N/A N/A 13 5 3/8 9 10 1/2 325 131 230 265
22 550 4 3/8 111 6 152 N/A N/A 14 5 7/8 9 10 3/4 350 146 230 273
Top of
28 700 3 7/8 98 5 7/8 149 N/A N/A washer 15 6 3/8 9 11 1/4 375 166 230 284
34 850 N/A N/A 5 5/8 143 6 1/8 156 to top of 16 7 1/8 9 11 1/2 400 179 230 291
torque
40 1000 N/A N/A 5 1/2 140 6 152 arm 17 7 7/8 9 12 425 195 230 301
46 1150 N/A N/A 5 1/4 133 5 7/8 149 18 8 1/4 9 12 1/4 450 207 230 309
52 1300 N/A N/A 5 1/8 130 5 7/8 149 19 9 9 12 3/4 475 223 230 320
58 1450 N/A N/A 5 127 5 3/4 146 20 9 3/8 9 13 500 235 230 329
64 1600 N/A N/A 4 3/4 121 5 5/8 143 21 10 9 13 1/2 525 249 230 339
Shading indicates preferred spring option 22 10 3/4 9 14 550 266 230 352
23 11 3/8 9 14 1/2 575 283 230 365
24 12 9 15 600 299 230 377
Specifications: 25 12 5/8 9 15 1/2 625 314 230 390
• Maximum Belt Speed..............................700 FPM (3.5m/s) 26 13 1/4 9 16 650 330 230 402
• Temperature Rating.................................-30°F to 180°F (-35°C to 82°C) 27 13 7/8 9 16 1/2 675 346 230 415
• Minimum Pulley Diameter......................10" (250mm) 28 14 3/8 9 17 700 360 230 427
• Blade Height.............................................7-1/4" (185mm) 29 15 9 17 1/2 725 374 230 439
• Usable Blade Wear Length....................4" (100mm) 30 15 5/8 9 18 775 389 230 452
• Blade Material..........................................Polyurethane (chemical resistant/ 31 16 1/8 9 18 1/2 775 403 230 464
food grade) 32 16 3/4 9 19 825 417 230 477
33 17 1/4 9 19 1/2 825 432 230 489
• Available for Belt Widths........................12" to 60" (300 to 1500mm)
34 17 7/8 9 20 850 446 230 501
• CEMA Cleaner Rating..............................Class 2
35 18 3/8 9 20 1/2 875 460 230 514
36 19 9 21 900 474 230 526
Replacement EZP1 Stainless Steel
Precleaner with
Parts List White ConShear™ Blade
7
Detail view of
Item 6
5 2
(hidden)
1
Replacement Parts 6
ORDERING ITEM WT.
REF DESCRIPTION
NUMBER CODE LBS.
12" (300mm) SS Pole EZP1P12-S/S 78812 17.4
4
18" (450mm) SS Pole EZP1P18-S/S 78813 20.3
24" (600mm) SS Pole EZP1P24-S/S 78814 22.7 4a
3
30" (750mm) SS Pole EZP1P30-S/S 78815 26.5 4b
36" (900mm) SS Pole EZP1P36-S/S 78816 30.4
1
42" (1050mm) SS Pole EZP1P42-S/S 78817 32.7
48" (1200mm) SS Pole EZP1P48-S/S 78818 35.3
54" (1350mm) SS Pole EZP1P54-S/S 78819 39.2
60" (1500mm) SS Pole EZP1P60-S/S 78820 43.3
72" (1800mm) SS Pole EZP1P72-S/S 78821 48.2
2 SS Mounting Plate Kit* (2 ea.) EZP1MPK-S/S 78923 7.7
3 SS Torque Arm Kit* (1 ea.) ESTAK-EST-S/S 78849 3.6
4 SS Tension Spring - Purple QMTS-P-S/S 77450 1.0
4a SS Tension Spring - White QMTS-W-S/S 77451 1.2
4b SS Tension Spring - Gold QMTS-G-S/S 77452 1.4
5 SS Pole Lock* (1 ea.) EZP1PL-S/S 78848 1.1
SS EST Tensioner - Purple*
– for blade widths 12" - 28" (300 - 700mm) EST-P-S/S 78808 7.7
(includes 1 each items 2, 3, 4)
SS EST Tensioner - White*
– for blade widths 34" - 52" (850 - 1300mm) EST-W-S/S 78809 7.9
(includes 1 each items 2, 3, 4a)
SS EST Tensioner - Gold*
– for blade widths 58" - 70" (1450 - 1750mm) EST-G-S/S 78810 8.1
(includes 1 each items 2, 3, 4b)
6 Blade Pin (1 ea.) MSPBPK-S/S 77583 0.1
*Hardware Included

78808 78809 78810
Cleaner Blade Width
EST-P-S/S EST-W-S/S EST-G-S/S
ConShear 12" - 28" (300 - 700mm) X
ConShear 34" - 52" (850 - 1300mm) X
ConShear 58" - 70" (1450 - 1750mm) X
For best results use Flexco Genuine Replacement Blades and Parts.

Product Ordering EZP-LS
Limited Space Precleaner
Information
EZP-LS Precleaner
12 300 10 250 EZP-LS212 77127 24.8
18 450 16 400 EZP-LS218 77128 28.2
24 600 22 550 EZP-LS224 77129 31.7
30 750 28 700 EZP-LS230 77130 35.1
36 900 34 850 EZP-LS236 77131 38.6
42 1050 40 1000 EZP-LS242 77132 42.0
48 1200 46 1150 EZP-LS248 77133 45.5 Belt Width Minus 2" (50mm)
54 1350 52 1300 EZP-LS254 77134 48.9 Material Path
60 1500 58 1450 EZP-LS260 77135 52.5
Belt Width
Blade Width
EZP-LS Precleaner
BELT WIDTH BLADE WIDTH ORDERING ITEM WT. Belt Width Minus 8" (200mm)
Material Path
18 450 10 250 EZP-LS818 77136 27.0
24 600 16 400 EZP-LS824 77137 30.4 Belt Width
30 750 22 550 EZP-LS830 77138 33.9
36 900 28 700 EZP-LS836 77139 37.3
Blade Width
42 1050 34 850 EZP-LS842 77140 40.8
48 1200 40 1000 EZP-LS848 77141 44.2
54 1350 46 1150 EZP-LS854 77142 47.7
60 1500 52 1300 EZP-LS860 77143 51.2
Product Notes:
• For optimal cleaning and reduced blade retensioning maintenance, the cleaner blade width should be sized to fit the material
path of the belt. The material path is typically 2/3 of the belt width.
• Each cleaner can be retrofitted with three replacement blade sizes (belt width minus 2" (50mm), minus 8" (200mm), or minus 14"
(350mm).
• Visual blade wear check. Tensioner has built-in gauge to monitor blade wear.
• For replacement parts see the EZP-LS Parts List on page 28.
• For applications requiring longer pole lengths, go to the minus 8" (200mm) chart and select the cleaner one
U.S. Patent No. D482,508S (blade)
Patent Pending (tensioner)
Product Ordering High Temp EZP-LS
Information
EZP-LS High-Temp Precleaner

12 300 10 250 EZP-LS212HT 77746 24.8
18 450 16 400 EZP-LS218HT 77747 28.2
24 600 22 550 EZP-LS224HT 77748 31.7
30 750 28 700 EZP-LS230HT 77749 35.1
36 900 34 850 EZP-LS236HT 77750 38.6
42 1050 40 1000 EZP-LS242HT 77751 42.0
48 1200 46 1150 EZP-LS248HT 77752 45.5
54 1350 52 1300 EZP-LS254HT 77753 48.9
60 1500 58 1450 EZP-LS260HT 77754 52.5 Match blade width to belt’s material path
Material Path
Belt Width
Blade Width
Product Notes:
• The high-temp ConShear LS works in temperatures up to 275°F (135°C) with spikes to 325°F (164°C).
• Each cleaner can be retrofitted with three replacement blade sizes (belt width minus 2" (50mm), minus 8" (200mm),
or minus 14" (350mm).
• Visual tension check. No guesswork on blade tensioning. Simply measure the spring, check label on tensioner
and turn adjusting nut to restore optimal tension.
• For replacement parts see the EZP-LS Parts List on page 28.


ConShear™ LS EZP-LS
Replacement Blades

12 300 10 250 N/A N/A N/A N/A
18 450 16 400 10 250 N/A N/A
24 600 22 550 16 400 10 250
30 750 28 700 22 550 16 400
36 900 34 850 28 700 22 550
Replacement ConShear™ -LS
42 1050 40 1000 34 850 28 700 High-Temp Blades
48 1200 46 1150 40 1000 34 850 BLADE WIDTH ORDERING ITEM WT.
54 1350 52 1300 46 1150 40 1000 in. mm NUMBER CODE LBS.
60 1500 58 1450 52 1300 46 1150 10 250 CRB-LS10HT 77551 2.1
16 400 CRB-LS16HT 77552 3.3
22 550 CRB-LS22HT 77553 4.6
Replacement ConShear™-LS Blades 28 700 CRB-LS28HT 77554 5.8
BLADE WIDTH ORDERING ITEM WT. 34 850 CRB-LS34HT 77555 7.1
in. mm NUMBER CODE LBS. 40 1000 CRB-LS40HT 77556 8.3
10 250 CRB-LS10 77088 2.1 46 1150 CRB-LS46HT 77557 9.6
16 400 CRB-LS16 77089 3.3 52 1300 CRB-LS52HT 77558 10.8
22 550 CRB-LS22 77090 4.6 58 1450 CRB-LS58HT 77559 12.1
28 700 CRB-LS28 77091 5.8 Other blade sizes available upon request.
34 850 CRB-LS34 77092 7.1
40 1000 CRB-LS40 77093 8.3
46 1150 CRB-LS46 77094 9.6
Replacement ConShear™-LS White
52 1300 CRB-LS52 77095 10.8 Blades (Chemical Resistant/Food Grade) ‡
58 1450 CRB-LS58 77096 12.1 BLADE WIDTH ORDERING ITEM WT.
Other blade sizes available upon request. in. mm NUMBER CODE LBS.
10 250 CRB-LS10W 77097 2.1
16 400 CRB-LS16W 77098 3.3
22 550 CRB-LS22W 77099 4.6
28 700 CRB-LS28W 77100 5.8
34 850 CRB-LS34W 77101 7.1
40 1000 CRB-LS40W 77102 8.3
46 1150 CRB-LS46W 77103 9.6
52 1300 CRB-LS52W 77104 10.8
58 1450 CRB-LS58W 77105 12.1
Product Notes:
Specifications EZP-LS
& Guidelines
Pole Length Specifications Pole Location Specs
MAXIMUM
CLEANER POLE CONVEYOR *
SIZE LENGTH SPAN
12 300 42 1050 37 925 A X
18 450 48 1200 43 1075
24 600 54 1350 49 1225 Max Conveyor Span Y
C
30 750 60 1500 55 1375 Pole Length Move Dim. C
36 900 66 1650 61 1525 on arc
48 1200 78 1950 73 1825 width minus 2" (50mm), belt width minus 8" (200mm), or
belt width minus 14" (350mm).
54 1350 88 2200 83 2075
60 1500 94 2350 89 2225
Pole Location Chart - Imperial
A X Y C
6" 2 5/8" 5 1/2" 6 1/8"
7" 3 1/4" 5 1/2" 6 3/8"
Clearance Guidelines 8" 3 7/8" 5 1/2" 6 3/4"
for Installation 9" 4 3/8" 5 1/2" 7"
HORIZONTAL VERTICAL Vertical 10" 5" 5 1/2" 7 3/8"
CLEARANCE REQUIRED CLEARANCE REQUIRED 11" 5 1/2" 5 1/2" 7 3/4"
in. mm in. mm 12" 6 1/8" 5 1/2" 8 1/4"
13" 6 5/8" 5 1/2" 8 5/8"
3 75 6 1/2 165 14" 7 1/8" 5 1/2" 9"
15" 7 5/8" 5 1/2" 9 3/8"
16" 8 1/4" 5 1/2" 9 7/8"
Horizontal 17" 8 3/4" 5 1/2" 10 3/8"
18" 9 1/4" 5 1/2" 10 3/4"
Spring Length Chart 19" 9 3/4" 5 1/2" 11 1/4"
EZP-LS w/Purple or Yellow Blade 20" 10 1/4" 5 1/2" 11 5/8"
21" 10 3/4" 5 1/2" 12 1/8"
BLADE PURPLE WHITE SILVER
22" 11 1/4" 5 1/2" 12 1/2"
WIDTH SPRING SPRING SPRING
in. mm in. mm in. mm in. mm Measure spring
10 250 2 51 N/A N/A N/A N/A length only (do not Pole Location Chart - Metric
16 400 1 5/8 48 2 1/8 54 N/A N/A
include bushings)
A X Y C
22 550 N/A N/A 2 51 N/A N/A
150 65 140 150
28 700 N/A N/A 1 7/8 48 N/A N/A 175 81 140 155
34 850 N/A N/A 1 3/4 44 N/A N/A 200 96 140 162
40 1000 N/A N/A 1 1/2 38 N/A N/A 225 109 140 171
46 1150 N/A N/A 1 3/8 35 2 51 250 125 140 179
52 1300 N/A N/A N/A N/A 2 51 275 138 140 189
58 1450 N/A N/A N/A N/A 1 7/8 48 300 153 140 198
Shading indicates preferred spring option 325 166 140 209
350 178 140 219
Specifications: 375 191 140 229
• Maximum Belt Speed........................................................ 500 FPM (2.5m/s) 400 206 140 239
425 219 140 252
• Temperature Rating (ConShear, ConShear White)....... -30°F to 180°F (-35°C to 82°C) 450 231 140 263
• Temperature Rating (ConShear High Temp).................. Up to 275°F (135°C) with spikes to 475 244 140 273
.............................................................................................. 325°F (164°C) 500 256 140 284
• Minimum Pulley Diameter................................................ 6" (150mm) 525 269 140 295
• Blade Height....................................................................... 4.5" (115mm) 550 281 140 307
• Usable Blade Wear Length.............................................. 2-3/8" (60mm)
• Blade Material.................................................................... Polyurethane (proprietary blend for
.............................................................................................. abrasion resistance and long wear)
• Available for Belt Widths.................................................. 12" to 60" (300 to 1500mm)
• CEMA Cleaner Rating........................................................ Class 2

Replacement EZP-LS
Parts List
7
5 5a 5b
4 2
Detail view of Item 6
Replacement Parts For Arch/Gordon Mini-Saber Blades

BELT BLADE
ORDERING ITEM WT.
WIDTH WIDTH ORDERING ITEM ARCH/GORDON WT.
REF DESCRIPTION NUMBER CODE LBS.
in. mm in. mm NUMBER CODE PART NUMBER LBS.
12" (300mm) Pole LSP12 77070 13.3
18 450 16 400 RBAGM-16 77106 MRBMN00018 3.3
18" (450mm) Pole LSP18 77071 15.5
24 600 22 550 RBAGM-22 77107 MRBMN00024 4.6
24" (600mm) Pole LSP24 77072 17.7
30 750 28 700 RBAGM-28 77108 MRBMN00030 5.8
30" (750mm) Pole LSP30 77073 19.9
36 900 34 850 RBAGM-34 77109 MRBMN00036 7.1
1 36" (900mm) Pole LSP36 77074 22.1
42 1050 40 1000 RBAGM-40 77110 MRBMN00042 8.3
42" (1050mm) Pole LSP42 77075 24.3
48 1200 46 1150 RBAGM-46 77111 MRBMN00048 9.6
48" (1200mm) Pole LSP48 77076 26.5
Additional sizes are available upon request. Call for pricing.
54" (1350mm) Pole LSP54 77077 28.7
60" (1500mm) Pole LSP60 77078 31.0
Mounting Plate Kit*
2 (incl. 1 tensioner mounting plate and 1 pole LSTMPK 77366 3.6
mounting plate)
3 Torque Arm Kit* (1 ea.) LST-TAK 77120 1.4
4 Pivot Block/Rod Kit* (1 ea.) LSTPB-RK 77367 .8
5 Tension Spring - Purple (1 ea.) LS-SPK 77365 .2
for blades 10-16" (250-400mm)
5a Tension Spring - White (1 ea.)

LS-SW 77117 .3
for blades 22" - 46" (550 - 1150mm)
5b Tension Spring - Silver (1 ea.) LS-SS 77118 .3

for blades 52" - 58" (1300 - 1450mm)
6 LS Blade Pin (1 ea.) LS-BP 77114 .1
7 Jam Nut Kit LST Tensioner JNK-B 79892 .3
LST Spring Tensioner* - Purple
incl. 1 tensioner mounting plate and
- 1 ea. items 3, 4 & 5
LST-P 77121 7.5
for blades 10"-16" (250-400mm)
LST Spring Tensioner* - White Spring Tensioner Selection Chart
incl. 1 tensioner mounting plate and
- LST-W 77122 7.6
1 ea. items 3, 4 & 5a 77121 77122 77123
for blades 22"- 46" (550 - 1150mm)
CLEANER BLADE WIDTH Purple White Silver
LST Spring Tensioner* - Silver ConShear-LS 10" - 16" (250 - 400mm) X
incl. 1 tensioner mounting plate and 1 ea.
- items 3, 4 & 5b
LST-S 77123 7.6 ConShear-LS 22" - 46" (550 - 1150mm) X
for blades 52"- 58" (1300 - 1450mm) ConShear-LS 52" - 58" (1300 - 1450mm) X
Hardware Included
U.S. Patent No. D482,508S (blade) For best results use Flexco Genuine
Patent Pending (tensioner) Replacement Blades and Parts.
Product Ordering EZP-LS Stainless Steel
Information with White ConShear™ LS Blade
EZP-LS Stainless Steel Precleaner

with White ConShear™ LS Blade
12 300 10 250 CLSFG-212 77144 24.8
18 450 16 400 CLSFG-218 77145 28.2
24 600 22 550 CLSFG-224 77146 31.7
30 750 28 700 CLSFG-230 77147 35.1
36 900 34 850 CLSFG-236 77148 38.6 Match blade width to belt’s material path
42 1050 40 1000 CLSFG-242 77149 42.0
48 1200 46 1150 CLSFG-248 77150 45.5 Belt Width Minus 2" (50mm)
54 1350 52 1300 CLSFG-254 77151 48.9 Material Path
60 1500 58 1450 CLSFG-260 77152 52.5
Belt Width
EZP-LS Stainless Steel Precleaner Blade Width

with White ConShear™ LS Blade
BELT WIDTH BLADE WIDTH ORDERING ITEM WT. Belt Width Minus 8" (200mm)
Material Path
18 450 10 250 CLSFG-818 77153 27.0
24 600 16 400 CLSFG-824 77154 30.4 Belt Width
30 750 22 550 CLSFG-830 77155 33.9
36 900 28 700 CLSFG-836 77156 37.3
42 1050 34 850 CLSFG-842 77157 40.8
Blade Width
48 1200 40 1000 CLSFG-848 77158 44.2
54 1350 46 1150 CLSFG-854 77159 47.7
60 1500 52 1300 CLSFG-860 77160 51.2
Product Notes:
• White food-grade ConShear Precleaner is chemical resistant and all ingredients used in polyurethane formulation comply with
the relevant requirements of 21 CFR (FDA Code of Federal Regulations) for use in repeated bulk dry food applications.
• Each cleaner can be retrofitted with three replacement blade sizes (belt width -2" (50mm), -8" (200mm), or -14" (350mm)).
• Comes complete with universal mounting plates and tensioner(s).
• For replacement parts see the EZP-LS SS Parts List on page 32.
• For applications requiring longer pole lengths, go to the minus 8" (200mm) chart and select the cleaner one belt width size
larger. This will provide a pole 6" (150mm) longer and a blade size of belt width minus 2" (50mm).


ConShear™ LS EZP-LS
Replacement Blades

12 300 10 250 N/A N/A N/A N/A
18 450 16 400 10 250 N/A N/A
24 600 22 550 16 400 10 250
30 750 28 700 22 550 16 400
36 900 34 850 28 700 22 550
42 1050 40 1000 34 850 28 700
Replacement ConShear™-LS Blades
48 1200 46 1150 40 1000 34 850
54 1350 52 1300 46 1150 40 1000
60 1500 58 1450 52 1300 46 1150
10 250 CRB-LS10 77088 2.1
16 400 CRB-LS16 77089 3.3
22 550 CRB-LS22 77090 4.6
28 700 CRB-LS28 77091 5.8
34 850 CRB-LS34 77092 7.1
Replacement ConShear™-LS White 40 1000 CRB-LS40 77093 8.3
Blades (Chemical Resistant/Food Grade) ‡ 46 1150 CRB-LS46 77094 9.6
BLADE WIDTH ORDERING ITEM WT. 52 1300 CRB-LS52 77095 10.8
in. mm NUMBER CODE LBS. 58 1450 CRB-LS58 77096 12.1
10 250 CRB-LS10W 77097 2.1 Other blade sizes available upon request.
16 400 CRB-LS16W 77098 3.3
22 550 CRB-LS22W 77099 4.6
28 700 CRB-LS28W 77100 5.8 Replacement ConShear™ -LS
34 850 CRB-LS34W 77101 7.1 High-Temp Blades
40 1000 CRB-LS40W 77102 8.3
46 1150 CRB-LS46W 77103 9.6
52 1300 CRB-LS52W 77104 10.8
10 250 CRB-LS10HT 77551 2.1
58 1450 CRB-LS58W 77105 12.1
16 400 CRB-LS16HT 77552 3.3
‡ All ingredients used in the polyurethane formulation of this blade comply with 22 550 CRB-LS22HT 77553 4.6
the relevant requirements of 21 CFR (FDA Code of Federal Regulations) for use in 28 700 CRB-LS28HT 77554 5.8
34 850 CRB-LS34HT 77555 7.1
40 1000 CRB-LS40HT 77556 8.3
46 1150 CRB-LS46HT 77557 9.6
52 1300 CRB-LS52HT 77558 10.8
58 1450 CRB-LS58HT 77559 12.1
Product Notes:
• For optimal cleaning and reduced blade retensioning maintenance, the cleaner blade width should
be sized to fit the material path of the belt. The material path is typically 2/3 of the belt width.
• Visual tension check. No guesswork on blade tensioning. Simply measure the spring,
check label on tensioner and turn adjusting nut to restore optimal tension.
Specifications EZP-LS Stainless Steel
& Guidelines with White ConShear™ LS Blade
Pole Length Specifications Pole Location Specs

MAXIMUM
CLEANER POLE CONVEYOR *
SIZE LENGTH SPAN
12 300 42 1050 37 925 A X
18 450 48 1200 43 1075
24 600 54 1350 49 1225 Max Conveyor Span Y
C
30 750 60 1500 55 1375 Pole Length Move Dim. C
36 900 66 1650 61 1525 on arc
42 1050 72 1800 67 1675 *Each pole size can be used with a blade size
48 1200 78 1950 73 1825 either belt width minus 2" (50mm), belt width minus
8" (200mm), or belt width minus 14" (350mm).
54 1350 88 2200 83 2075
60 1500 94 2350 89 2225
Pole Location Chart - Imperial
A X Y C
6" 2 5/8" 5 1/2" 6 1/8"
7" 3 1/4" 5 1/2" 6 3/8"
Clearance Guidelines 8" 3 7/8" 5 1/2" 6 3/4"
for Installation 9" 4 3/8" 5 1/2" 7"
HORIZONTAL VERTICAL Vertical 10" 5" 5 1/2" 7 3/8"
CLEARANCE REQUIRED CLEARANCE REQUIRED 11" 5 1/2" 5 1/2" 7 3/4"
in. mm in. mm 12" 6 1/8" 5 1/2" 8 1/4"
13" 6 5/8" 5 1/2" 8 5/8"
3 75 6 1/2 165 14" 7 1/8" 5 1/2" 9"
15" 7 5/8" 5 1/2" 9 3/8"
16" 8 1/4" 5 1/2" 9 7/8"
Horizontal 17" 8 3/4" 5 1/2" 10 3/8"
18" 9 1/4" 5 1/2" 10 3/4"
Spring Length Chart 19" 9 3/4" 5 1/2" 11 1/4"
BLADE BLACK WHITE DUAL WHITE 20" 10 1/4" 5 1/2" 11 5/8"
WIDTH SPRING SPRING SPRINGS 21" 10 3/4" 5 1/2" 12 1/8"
in. mm in. mm in. mm in. mm 22" 11 1/4" 5 1/2" 12 1/2"
Measure spring
10 250 3 1/2 89 3 3/4 95 3 7/8 98 length only (do not
16 400 3 1/4 83 3 5/8 92 3 7/8 98 include bushings) Pole Location Chart - Metric
22 550 2 7/8 73 3 1/2 89 3 3/4 95
28 700 2 5/8 67 3 3/8 86 3 3/4 95
A X Y C
34 850 N/A N/A 3 1/4 83 3 5/8 92
150 65 140 150
175 81 140 155
40 1000 N/A N/A 3 1/8 79 3 5/8 92
200 96 140 162
46 1150 N/A N/A 3 76 3 1/2 89
225 109 140 171
52 1300 N/A N/A N/A N/A 3 1/2 89
250 125 140 179
58 1450 N/A N/A N/A N/A 3 3/8 86
275 138 140 189
Shading indicates preferred spring option 300 153 140 198
325 166 140 209
350 178 140 219
375 191 140 229
400 206 140 239
Specifications: 425 219 140 252
• Maximum Belt Speed........................................................ 500 FPM (2.5m/s) 450 231 140 263
475 244 140 273
• Temperature Rating (ConShear, ConShear White)....... -30°F to 180°F (-35°C to 82°C)
500 256 140 284
• Temperature Rating (ConShear High Temp).................. Up to 275°F (135°C) with spikes to 525 269 140 295
.............................................................................................. 325°F (164°C) 550 281 140 307
• Minimum Pulley Diameter................................................ 6" (150mm)
• Blade Height....................................................................... 4.5" (115mm)
• Usable Blade Wear Length.............................................. 2-3/8" (60mm)
• Blade Material (ConShear White)................................... Polyurethane (chemical resistant/food grade)
• Available for Belt Widths.................................................. 12" to 60" (300 to 1500mm)
• CEMA Cleaner Rating........................................................ Class 2

Replacement EZP-LS Stainless Steel
Parts List with White ConShear™ LS Blade
3a
3 2a
2
2 2a
Replacement Parts
ORDERING ITEM WT.
12" (300mm) SS Pole LSP12-S/S 77079 13.3
18" (450mm) SS Pole LSP18-S/S 77080 15.5
24" (600mm) SS Pole LSP24-S/S 77081 17.7
30" (750mm) SS Pole LSP30-S/S 77082 19.9
1 36" (900mm) SS Pole LSP36-S/S 77083 22.1
42" (1050mm) SS Pole LSP42-S/S 77084 24.3
48" (1200mm) SS Pole LSP48-S/S 77085 26.5
54" (1350mm) SS Pole LSP54-S/S 77086 28.7
60" (1500mm) SS Pole LSP60-S/S 77087 31.0
SS Mounting Plate Kit (10"-46"/250-1150mm)*
2 (incl. 1 tensioner mounting plate and LSTMPK-S/S 78933 3.6
1 pole mounting plate)
SS Mounting Plate Kit (52"+/1300mm+)*
2a LSTMPK2-S/S 78462 7.2
(incl. 2 tensioner mounting plates)
Tension Spring - Black (1 ea.)
3 CTS-B-S/S 78387 .2
for blades 10-28" (250-700mm)
Tension Spring - White (1 ea.)
3a LS-SW-S/S 78850 .3
for blades 34" - 70" (850 - 1750mm)
4 SS LS Blade Pin (1 ea.) LS-BP-S/S 77115 .1
SS LST Spring Tensioner* - Black Spring Tensioner Selection Chart
- incl. 1 ea. items 2 & 3 LST-B-S/S 77124 7.5
for blades 10"-28" (250 - 700mm) 77124 77125 77126
SS LST Spring Tensioner* - White Black White White
- incl. 1 ea. items 2 & 3a LST-W-S/S 77125 7.6 CLEANER BLADE WIDTH (single) (single) (dual)
for blades 34"- 46" (850 - 1150mm) Food Grade-LS 10" - 28" (250 - 700mm) X
SS LST Spring Tensioner* - White (dual) Food Grade-LS 34" - 46" (850 - 1150mm) X
- incl. 1 ea. item 2a and 2 ea. item 3a LST-W-S/S-2 77126 15.2 Food Grade-LS 52" - 70" (1300 - 1750mm) X
for blades 52"- 70" (1300 - 1750mm)
*Hardware Included
For best results use Flexco Genuine Replacement Blades and Parts.
Product Ordering MSP
Standard Mine-Duty Precleaner
Information
MSP Standard-Duty Precleaner

24 600 22 550 MSP-224 75787 83.4
30 750 28 700 MSP-230 75788 89.6
36 900 34 850 MSP-236 75789 98.2
42 1050 40 1000 MSP-242 75790 106.0
48 1200 46 1150 MSP-248 75791 113.2
54 1350 52 1300 MSP-254 75792 120.0
60 1500 58 1450 MSP-260 75793 125.7
72 1800 70 1750 MSP-272 75794 140.2 Match blade width to belt's material path
84 2100 82 2050 MSP-284 76796 164.2 Belt Width Minus 2" (50mm)
Material Path
Belt Width
Blade Width
MSP Standard-Duty Precleaner

Belt Width Minus 8" (200mm) Belt Width Minus 8" (200mm)
BELT WIDTH BLADE WIDTH ORDERING ITEM WT. Material Path
Belt Width
24 600 16 400 MSP-824 75795 80.6
30 750 22 550 MSP-830 75796 86.9
36 900 28 700 MSP-836 75797 95.5 Blade Width
42 1050 34 850 MSP-842 75798 103.2
48 1200 40 1000 MSP-848 75799 110.5
54 1350 46 1150 MSP-854 75800 117.2
60 1500 52 1300 MSP-860 75801 123.0
72 1800 64 1600 MSP-872 75802 134.7
84 2100 76 1900 MSP-884 76797 160.0
Product Notes:
• Recommended for standard-duty conveyor applications. For tougher belt applications see the MMP Medium-Duty Precleaner
(page 39). For extreme, abusive applications see the MHP Heavy-Duty Precleaner (page 47) or the MHCP Heavy-Duty
Cartridge Precleaner (page 54).
• Material Path Option: Fit the blade width to the belt’s material path. The material path is typically the center 2/3 of the belt
width. In most cases a blade size of belt width minus 8" (200mm) may be the best solution.
• Each cleaner pole is retrofittable for three blade sizes (belt width minus 2" (50mm), minus 8" (200mm) or minus 14" (350mm)).
• Pole Length: Belt width plus 54" (1350mm). For conveyors requiring longer pole lengths, go to the minus 8" (200mm) chart and
select the cleaner one belt width size larger. This will provide a pole 6" (150mm) longer and a blade size of belt width minus 2"
(50mm).
For longer requirements see Installation Accessories - Pole Extender Kit (page 131).
• Visual Tension Check: No guesswork on blade tensioning. Measure the spring and adjust to specified length per blade width to
restore optimal tensioning.
• To make cleaner installation easier and quicker, see Optional Mounting Kits (page 131).

Product Ordering Stainless Steel MSP
Information
Stainless Steel MSP Standard-Duty Precleaner

24 600 22 550 MSP-224-S/S 77453 83.4
30 750 28 700 MSP-230-S/S 77454 89.6
36 900 34 850 MSP-236-S/S 77455 98.2
42 1050 40 1000 MSP-242-S/S 77456 106.0
48 1200 46 1150 MSP-248-S/S 77457 113.2
54 1350 52 1300 MSP-254-S/S 77458 120.0
60 1500 58 1450 MSP-260-S/S 77459 125.7
72 1800 70 1750 MSP-272-S/S 77460 140.2 Match blade width to belt's material path
84 2100 82 2050 MSP-284-S/S 77461 164.2
Material Path
Belt Width
Blade Width
Stainless Steel MSP Standard-Duty Precleaner

BELT WIDTH BLADE WIDTH ORDERING ITEM WT. Material Path
24 600 16 400 MSP-824-S/S 77462 80.6 Belt Width
30 750 22 550 MSP-830-S/S 77463 86.9
36 900 28 700 MSP-836-S/S 77464 95.5 Blade Width
42 1050 34 850 MSP-842-S/S 77465 103.2
48 1200 40 1000 MSP-848-S/S 77466 110.5
54 1350 46 1150 MSP-854-S/S 77467 117.2
60 1500 52 1300 MSP-860-S/S 77468 123.0
72 1800 64 1600 MSP-872-S/S 77470 134.7
84 2100 76 1900 MSP-884-S/S 77471 160.0
Product Notes:
• Recommended for standard-duty conveyor applications, but in corrosive environments.
• Pole Length: Belt width plus 54" (1350mm). For conveyors requiring longer pole lengths, go to the minus 8" chart and select
the cleaner one belt width size larger. This will provide a pole 6" (150mm) longer and a blade size of belt width minus 2"
(50mm).
For longer requirements see Installation Accessories - Pole Extender Kit (page 131).
• Visual Tension Check: No guesswork on blade tensioning. Measure the spring and adjust to specified length per blade width
to restore optimal tensioning.
ConShear™ MSP
Replacement Blades

24 600 22 550 16 400 10 250
30 750 28 700 22 550 16 400
36 900 34 850 28 700 22 550
42 1050 40 1000 34 850 28 700
48 1200 46 1150 40 1000 34 850
54 1350 52 1300 46 1150 40 1000
60 1500 58 1450 52 1300 46 1150
72 1800 70 1750 64 1600 58 1450
Replacement
84 2100 82 2050 76 1900 70 1750 High Temp ConShear™ Blades
(Color Identification: Yellow)
10 250 CRB-HT10 76593 4.8
16 400 CRB-HT16 76594 7.6
Ordering Information
22 550 CRB-HT22 76595 10.4
ConShear™ Replacement Blades 28 700 CRB-HT28 76596 13.2
BLADE WIDTH 34 850 CRB-HT34 76597 16.2
ORDERING ITEM WT.
in. mm NUMBER CODE LBS. 40 1000 CRB-HT40 76598 19.1
10 250 CRB10 75628 4.6 46 1150 CRB-HT46 76599 21.9
16 400 CRB16 75629 7.3 52 1300 CRB-HT52 76600 24.8
22 550 CRB22 75630 10.1 58 1450 CRB-HT58 76601 27.6
28 700 CRB28 75631 12.8 64 1600 CRB-HT64 76602 30.5
34 850 CRB34 75632 15.5 70 1750 CRB-HT70 76603 33.4
40 1000 CRB40 75633 18.3
46 1150 CRB46 75634 21.0
52 1300 CRB52 75635 23.8 Replacement White ConShear™
58 1450 CRB58 75636 26.5
Blades (Chemical Resistant/Food Grade) ‡
64 1600 CRB64 75775 29.2
70 1750 CRB70 75773 32.0
76 1900 CRB76 76940 34.7 in. mm NUMBER CODE LBS.
82 2050 CRB82 76941 37.5 10 250 CRB-W10 78471 4.8
Other blade sizes available upon request. 16 400 CRB-W16 78472 7.6
22 550 CRB-W22 78473 10.4
28 700 CRB-W28 78474 13.2
34 850 CRB-W34 78475 16.2
40 1000 CRB-W40 78476 19.1
46 1150 CRB-W46 78477 21.9
52 1300 CRB-W52 78478 24.8
58 1450 CRB-W58 78479 27.6
Product Notes:
• A molded-in wear line indicates when the blade is worn out and needs to be replaced.
• Faceted blade profile: Renews its cleaning edge as the blade wears.
• ConShear™ blades are made of a special long-wearing polyurethane.
• Quick blade replacement: Pull one pin, remove the old blade and slide the new one in.

Specifications MSP
& Guidelines
Pole Length Specifications*
MAXIMUM
*
24 600 78 1950 68 1700
30 750 84 2100 74 1850
36 900 90 2250 80 2000
42 1050 96 2400 86 2150
54 1350 108 2700 98 2450 Pole Length
72 1800 126 3150 116 2900 width minus 2" (50mm), belt width minus 8" (200mm), or belt
84 2100 138 3450 128 3200 width minus 14" (350mm).
*For special extra long pole length requirements, a Pole
Extender Kit (#76024) is available that provides 30" (750mm)
of extended pole length. See page 131.
Pole Location Specs
Installation
HORIZONTAL VERTICAL Vertical
CLEARANCE CLEARANCE
REQUIRED REQUIRED A X
in. mm in. mm
4 100 10 250 Move Dim. C Y
C
on arc
Spring Length Chart Horizontal
BLADE PURPLE WHITE GOLD
WIDTH SPRING SPRING SPRING A = Pulley Diameter + Lagging and Belt
in. mm in. mm in. mm in. mm C = Critical Spec to move location if necessary
16 400 5 1/4 133 6 1/4 159 N/A N/A
22
28
550
700
4 3/4
4 1/8
121
105
6 1/8
5 7/8
156
149
N/A
N/A
N/A
N/A
Pole Location Pole Location
34 850 N/A N/A 5 3/4 146 6 1/8 156 Chart IMPERIAL Chart METRIC
40 1000 N/A N/A 5 5/8 143 6 1/8 156 A X Y C A X Y C
46 1150 N/A N/A 5 1/2 140 6 152
Top of washer 16 7 1/8 9 11 1/2 450 204 230 308
52 1300 N/A N/A 5 3/8 137 5 7/8 149
to top of 17 7 7/8 9 12 475 222 230 320
58 1450 N/A N/A 5 1/8 130 5 7/8 149
64 1600 N/A N/A 5 127 5 3/4 146 torque arm 18 8 1/4 9 12 1/4 500 232 230 326
70 1750 N/A N/A 4 7/8 124 5 5/8 143 19 9 9 12 3/4 525 248 230 338
76 1900 N/A N/A N/A N/A 5 5/8 143 20 9 3/8 9 13 550 266 230 352
82 2050 N/A N/A N/A N/A 5 1/2 140 21 10 9 13 1/2
575 282 230 364
88 2200 N/A N/A N/A N/A 5 1/4 133 22 10 3/4 9 14
600 298 230 376
94 2350 N/A N/A N/A N/A 5 1/8 130 23 11 3/8 9 14 1/2
625 312 230 388
100 2500 N/A N/A N/A N/A 5 1/8 130 24 12 9 15
106 2650 N/A N/A N/A N/A 5 127 25 12 5/8 9 15 1/2 650 330 230 402
Shading indicates preferred spring option 26 13 1/4 9 16 675 344 230 414
27 13 7/8 9 16 1/2 700 358 230 426
Specifications: 28 14 3/8 9 17 725 372 230 438
• Maximum Belt Speed.................................................700 FPM (3.5m/s) 29 15 9 17 1/2 750 390 230 452
• Temperature Rating (ConShear, ConShear White).....-30°F to 180°F (-35°C to 82°C) 30 15 5/8 9 18 775 402 230 464
• Temperature Rating (ConShear High Temp)...............Up to 275°F (135°C) with spikes 31 16 1/8 9 18 1/2 800 416 230 476
to 325°F (164°C) 32 16 3/4 9 19 825 430 230 488
33 17 1/4 9 19 1/2 850 446 230 502
• Minimum Pulley Diameter..........................................16" (400mm)
34 17 7/8 9 20 875 460 230 514
• Blade Height.................................................................7-1/4" (185mm) 35 18 3/8 9 20 1/2
900 474 230 526
• Usable Blade Wear Length........................................4" (100mm) 36 19 9 21
925 486 230 538
• Blade Material.............................................................Polyurethane (proprietary blend for 37 19 1/2 9 21 1/2
950 502 230 552
abrasion resistance and long wear) 38 20 9 22
39 20 5/8 9 22 1/2 975 514 230 564
• Available for Belt Widths...........................................24" to 84" (600 to 2100mm) 1000 528 230 576
40 21 1/8 9 23
• CEMA Cleaner Rating.................................................Class 3 1025 542 230 588
41 21 3/4 9 23 1/2
U.S. Patent No. D482,508S 42 22 1/4 9 24 1050 556 230 602
Replacement MSP
Parts List
2
9
3 8 5
(hidden)
1 10
Detail view of Item 4 7
7a
7b
6
Replacement Parts 6a
ORDERING ITEM WT. 6b
24" (600mm) Pole MSPP24 75803 42.5
30" (750mm) Pole MSPP30 75804 46.0
36" (900mm) Pole MSPP36 75805 50.5
42" (1050mm) Pole MSPP42 75806 55.5
1 48" (1200mm) Pole MSPP48 75807 60.0
54" (1350mm) Pole MSPP54 75808 64.0
60" (1500mm) Pole MSPP60 75809 67.0
72" (1800mm) Pole MSPP72 75810 76.0
84" (2100mm) Pole MSPP84 76807 88.6
2 Mounting Plate Kit* (2 ea.) MSPMPK 75811 8.3
3 Pole Lock* (1 ea.) MSPPL 75816 1.9
4 Blade Pin Kit* (1 ea.) MSPBPK 75831 0.1
5 Pivot Arm Kit* (1 ea.) QMTPAK 76096 4.3
6 Tension Spring - Purple (1 ea.) QMTS-P 75845 0.6
for blades 16" - 28" (400 - 700mm)
6a Tension Spring - White (1 ea.) PSTS-W 75898 1.7

for blades 34" - 70" (850 - 1750mm)
6b Tension Spring - Gold (1 ea.) QMTS-G 76484 2.5

for blades 76" - 82" (1900 - 2050mm)
7 Bushing Kit - Purple (2 ea.) QMTBK-P 76097 0.1
7a Bushing Kit - White (2 ea.) QMTBK-W 76098 0.2
7b Bushing Kit - Gold (2 ea.) QMTBK-G 76540 0.3
8 Pivot Shaft Bracket Kit* (1 ea.) QMTPSBK 76099 4.3
9 Torsion Arm Kit* (1 ea.) PSTA 75896 11.4
10 Jam Nut Kit QMT Tensioner JNK-C 79893 0.3
QMT Spring Tensioner* - Purple
- (incl. 1 ea. Items 5, 6, 7, 8, & 9)
for blades 16" - 28" (400 - 700mm)
QMT-P 76074 20.4 Spring Tensioner Selection Chart
QMT Spring Tensioner* - White 76074 76075 76483
- (incl. 1 ea. Items 5, 6a, 7a, 8, & 9) QMT-W 76075 21.8 CLEANER BLADE WIDTH QMT-P QMT-W QMT-G
for blades 34" - 70" (850 - 1750mm)
ConShear 16" - 28" (400 - 700mm) X
QMT Spring Tensioner* - Gold ConShear 34" - 70" (850 - 1750mm) X
- (incl. 1 ea. Items 5, 6b, 7b, 8, & 9) QMT-G 76483 23.2
for blades 76" - 82" (1900 - 2050mm) ConShear 76" - 82" (1900 - 2050mm) X
*Hardware Included

Replacement Stainless Steel MSP
Parts List
2
9
3 8 5
Hidden
1
Detail view of Item 4 7
7a
7b
6
6a
Replacement Parts
6b
ORDERING ITEM WT.
24" (600mm) SS Pole MSPP24-S/S 77472 42.5
30" (750mm) SS Pole MSPP30-S/S 77473 46.0
36" (900mm) SS Pole MSPP36-S/S 77474 50.5
42" (1050mm) SS Pole MSPP42-S/S 77475 55.5
1 48" (1200mm) SS Pole MSPP48-S/S 77476 60.0
54" (1350mm) SS Pole MSPP54-S/S 77477 64.0
60" (1500mm) SS Pole MSPP60-S/S 77478 67.0
72" (1800mm) SS Pole MSPP72-S/S 77479 76.0
84" (2100mm) SS Pole MSPP84-S/S 77480 88.6
2 SS Mounting Plate Kit* (2 ea.) MSPMPK-S/S 77582 8.3
3 SS Pole Lock* (1 ea.) MSPPL-S/S 77524 1.9
4 SS Blade Pin Kit* (1 ea.) MSPBPK-S/S 77583 0.1
5 SS Pivot Arm Kit* (1 ea.) QMTPAK-S/S 77587 4.3
6 SS Tension Spring - Purple (1 ea.) QMTS-P-S/S 77450 0.6
for blades 16" - 28" (400 - 700mm)
6a SS Tension Spring - White (1 ea.)

QMTS-W-S/S 77451 1.7
for blades 34" - 70" (850 - 1750mm)
6b SS Tension Spring - Gold (1 ea.)

QMTS-G-S/S 77452 2.5
for blades 76" - 82" (1900 - 2050mm)
7 Bushing Kit - Purple (2 ea.) QMTBK-P 76097 0.1
7a Bushing Kit - White (2 ea.) QMTBK-W 76098 0.2
8 SS Pivot Shaft Bracket Kit* (1 ea.) QMTPSBK-S/S 77588 4.3
9 SS Torsion Arm Kit* (1 ea.) PSTA-S/S 77442 11.4
SS QMT Spring Tensioner* - Purple 77584 77585 77586
- (incl. 1 ea. Items 5, 6, 7, 8, & 9) QMT-P-S/S 77584 20.4 CLEANER BLADE WIDTH QMT-P-S/S QMT-W-S/S QMT-G-S/S
for blades 16" - 28" (400 - 700mm)
ConShear 16" - 28"
SS QMT Spring Tensioner* - White X
- (incl. 1 ea. Items 5, 6a, 7a, 8, & 9) QMT-W-S/S 77585 21.8 (400 - 700mm)
for blades 34" - 70" (850 - 1750mm) ConShear 34" - 70"
X
SS QMT Spring Tensioner* - Gold (850 - 1750mm)
- (incl. 1 ea. Items 5, 6b, 7b, 8, & 9) QMT-G-S/S 77586 23.2 ConShear 76" - 82"
X
for blades 76" - 82" (1900 - 2050mm) (1900 - 2050mm)
*Hardware Included
Product Ordering MMP
Medium Mine-Duty Precleaner
Information
MMP Medium-Duty Precleaner
24 600 18 450 MMP-624 76450 159.4
30 750 24 600 MMP-630 76451 175.0
36 900 30 750 MMP-636 76452 190.6
42 1050 36 900 MMP-642 76453 206.2
48 1200 42 1050 MMP-648 76454 221.8
54 1350 48 1200 MMP-654 76455 237.4
60 1500 54 1350 MMP-660 76456 253.0
72 1800 66 1650 MMP-672 76457 291.1
84 2100 78 1950 MMP-684 76798 344.1
96 2400 90 2250 MMP-696 79033 397.1
Match blade width to belt's material path
MMP Medium-Duty Precleaner Belt Width Minus 6" (150mm)

Belt Width Minus 12" (300mm) Material Path
BELT WIDTH BLADE WIDTH ORDERING ITEM WT. Belt Width
30 750 18 450 MMP-1230 76551 168.0 Blade Width
36 900 24 600 MMP-1236 76552 183.6
42 1050 30 750 MMP-1242 76553 199.2
48 1200 36 900 MMP-1248 76554 214.8
54 1350 42 1050 MMP-1254 76555 230.4
60 1500 48 1200 MMP-1260 76556 246.0 Belt Width Minus 12" (300mm)
72 1800 60 1500 MMP-1272 76557 284.1
84 2100 72 1800 MMP-1284 76799 337.1
Material Path
96 2400 84 2100 MMP-1296 79034 390.1 Belt Width
Blade Width
MMP Medium-Duty Precleaner
36 900 18 450 MMP-1836 77575 176.6
Material Path
42 1050 24 600 MMP-1842 77576 192.2
48 1200 30 750 MMP-1848 77577 207.8 Belt Width
54 1350 36 900 MMP-1854 77578 223.4
60 1500 42 1050 MMP-1860 77579 239.0 Blade Width
72 1800 54 1350 MMP-1872 77580 277.1
84 2100 66 1650 MMP-1884 77581 330.1
96 2400 78 1950 MMP-1896 79040 383.1
Product Notes:
• Recommended for medium-duty conveyor applications. For abusive applications see the MHCP Heavy-Duty Cartridge
Precleaner (page 54).
• Pole Length: Belt width plus 54" (1350mm). For longer requirements see Installation Accessories - Pole Extender Kit (page 131).

Product Ordering Stainless Steel MMP
Information
Stainless Steel MMP Medium-Duty Precleaner

24 600 18 450 MMP-624-S/S 77424 159.4
30 750 24 600 MMP-630-S/S 77425 175.0
36 900 30 750 MMP-636-S/S 77426 190.6
42 1050 36 900 MMP-642-S/S 77427 206.2
48 1200 42 1050 MMP-648-S/S 77428 221.8
54 1350 48 1200 MMP-654-S/S 77429 237.4
60 1500 54 1350 MMP-660-S/S 77430 253.0 Belt Width Minus 6" (150mm)
72 1800 66 1650 MMP-672-S/S 77431 291.1
Material Path
84 2100 78 1950 MMP-684-S/S 77432 344.1
96 2400 90 2250 MMP-696-S/S 79035 397.1 Belt Width
Blade Width
Stainless Steel MMP Medium-Duty Precleaner

BELT WIDTH BLADE WIDTH Material Path
ORDERING ITEM WT.
Belt Width
30 750 18 450 MMP-1230-S/S 77433 168.0
36 900 24 600 MMP-1236-S/S 77434 183.6 Blade Width
42 1050 30 750 MMP-1242-S/S 77435 199.2
48 1200 36 900 MMP-1248-S/S 77436 214.8
54 1350 42 1050 MMP-1254-S/S 77437 230.4
60 1500 48 1200 MMP-1260-S/S 77438 246.0
72 1800 60 1500 MMP-1272-S/S 77439 284.1
84 2100 72 1800 MMP-1284-S/S 77440 337.1
96 2400 84 2100 MMP-1296-S/S 79036 390.1
Product Notes:
• Recommended for medium-duty conveyor applications, but in corrosive environments.
• Pole Length: Belt width plus 54" (1350mm). For longer requirements see Installation Accessories - Pole Extender Kit (page
131).
Product Ordering MMP
Medium Mine-Duty Precleaner with
Information Portable Air Tensioner
MMP Medium-Duty Precleaner with PAT

Tank sold separately.
Belt Width Minus 6" (150mm) See page 42 for options.
24 600 18 450 MMP-624P 78706 202.0
30 750 24 600 MMP-630P 78707 217.6
36 900 30 750 MMP-636P 78708 233.2
42 1050 36 900 MMP-642P 78709 248.8
48 1200 42 1050 MMP-648P 78710 264.4 Match blade width to belt's material path
54 1350 48 1200 MMP-654P 78711 280.0
60 1500 54 1350 MMP-660P 78712 295.6 Belt Width Minus 6" (150mm)
72 1800 66 1650 MMP-672P 78713 333.7 Material Path
84 2100 78 1950 MMP-684P 78714 386.7
96 2400 90 2250 MMP-696P 79037 439.7 Belt Width
Blade Width
MMP Medium-Duty Precleaner with PAT

in. mm in. mm NUMBER CODE LBS. Material Path
30 750 18 450 MMP-1230P 78715 210.6 Belt Width
36 900 24 600 MMP-1236P 78716 226.2
42 1050 30 750 MMP-1242P 78717 241.8 Blade Width
48 1200 36 900 MMP-1248P 78718 257.4
54 1350 42 1050 MMP-1254P 78719 273.0
60 1500 48 1200 MMP-1260P 78720 288.6
72 1800 60 1500 MMP-1272P 78721 326.7
84 2100 72 1800 MMP-1284P 78722 379.7
96 2400 84 2100 MMP-1296P 79038 432.7
Product Notes:
• Recommended for medium-duty conveyor applications. For abusive applications see MHCP Heavy-Duty Cartridge Precleaner
(page 54).
131).
• Portable Air Tensioner used for constant, automatic tension throughout the life of the blades. Can be used with site-available
air lines or with the add-on Air Tank.

Product Ordering Line Connections
for Portable Air Tensioner
Information
Air Tanks
ORDERING ITEM WT.
NUMBER CODE LBS.
PAT1 78684 13.0
PAT2 78685 13.0
PAT1 (Single) PAT2 (Dual)
1
Replacement Parts List
ORDERING ITEM WT.
1 Tank Label Kit PATLK 78791 0.1
Tank Hose Kit (incl. 1 ea. 10' hose and
2 PATHK 78794 1.5
1' poly spiral wrap, 2 hose clamps)
Product Notes:
• For use with PAT cleaner assemblies and PAT control box.
• Single for applications with one cleaner, double for applications with two cleaners.
• 150# pop-off valve for safe pressurizing/charging of Air Tank.
• ASME construction.
Air Line Connection Nitrogen Tank Connection for

for Site-Accessible Air Site-Provided Nitrogen Tank
NUMBER CODE LBS. NUMBER CODE LBS.
PATHK* 78794 1.5 PANK* 78799 5.0
*incl. 10' hose, 1' poly spiral wrap, 2 *incl. Nitrogen Regulator, 10' hose, 2 hose clamps
hose clamps
TuffShear™ MMP
Replacement Blades
NOTE: TuffShear replacement blades will

retrofit to Martin® QC® XHD Cleaners.

24 600 18 450 N/A N/A N/A N/A
30 750 24 600 18 450 N/A N/A
36 900 30 750 24 600 18 450
42 1050 36 900 30 750 24 600
48 1200 42 1050 36 900 30 750
54 1350 48 1200 42 1050 36 900
60 1500 54 1350 48 1200 42 1050
72 1800 66 1650 60 1500 54 1350
84 2100 78 1950 72 1800 66 1650
96 2400 90 2250 84 2100 78 1950
Replacement TuffShear™
Replacement TuffShear™ Blades High-Temp Blades
BLADE WIDTH BLADE WIDTH
in. mm NUMBER CODE LBS. in. mm NUMBER CODE LBS.
18 450 TRB18 76485 21.0 18 450 TRB-HT18 78754 21.0
24 600 TRB24 76486 28.0 24 600 TRB-HT24 78755 28.0
30 750 TRB30 76487 35.0 30 750 TRB-HT30 78756 35.0
36 900 TRB36 76488 42.0 36 900 TRB-HT36 78757 42.0
42 1050 TRB42 76489 49.0 42 1050 TRB-HT42 78758 49.0
48 1200 TRB48 76490 56.0 48 1200 TRB-HT48 78759 56.0
54 1350 TRB54 76491 63.0 54 1350 TRB-HT54 78760 63.0
60 1500 TRB60 76492 70.0 60 1500 TRB-HT60 78761 70.0
66 1650 TRB66 76493 77.0 66 1650 TRB-HT66 78762 77.0
72 1800 TRB72 76494 84.0 72 1800 TRB-HT72 78763 84.0
78 1950 TRB78 76697 91.0 78 1950 TRB-HT78 78764 91.0
84 2100 TRB84 77047 98.0 Other blade sizes available upon request.
90 2250 TRB90 77048 105.0
Product Notes:
• TuffShear™ blades are made of a special long-wearing polyurethane.
Martin® and QC® #1 are registered trademarks of Martin Engineering, Neponset, IL.

Specifications MMP
& Guidelines
MAX OVERALL CENTER POLE MAXIMUM *
CLEANER SIZE POLE LENGTH LENGTH CONVEYOR SPAN
24 600 78 1950 24 600 66 1650
30 750 84 2100 30 750 72 1800
36 900 90 2250 36 900 78 1950 Max Conveyor Span
42 1050 96 2400 42 1050 84 2100 Pole Length
48 1200 102 2550 48 1200 90 2250 *Each pole size can be used with a blade size either belt
54 1350 108 2700 54 1350 96 2400 width minus 6" (150mm), belt width minus 12" (300mm), or belt
60 1500 114 2850 60 1500 102 2550 width minus 18" (450mm).
72 1800 126 3150 72 1800 114 2850
84 2100 138 3450 84 2100 126 3150 Pole Location Specs
96 2400 150 3750 96 2400 138 3450
*For special extra long pole length requirements a Pole Extender Kit (#76024) is
available that provides 30" (750mm) of extended pole length. (page 131). Move Dim. C
Pole Diameter - 2-7/8" (73mm) on arc
Clearance Guidelines A X
for Installation
Y
HORIZONTAL VERTICAL C
CLEARANCE REQUIRED CLEARANCE REQUIRED Vertical
in. mm in. mm
4 100 13 325
Spring Length Chart
Blade Purple White Gold Silver Pole Location Chart
Width Springs Springs Springs Springs
Horizontal A X Y C
18" 4 5/8" 6" 6 1/4" 6 1/2" Pressure Chart
16" 8 1/8" 12" 14 1/2"
24" 4" 5 7/8" 6 1/4" 6 3/8" Blade 17" 8 3/4" 12" 14 7/8"
30" N/A 5 5/8" 6 1/8" 6 3/8" Width PSI 18" 9 1/4" 12" 15 1/8"
36" N/A 5 1/2" 6" 6 1/4" 18" 5# 19" 9 3/4" 12" 15 1/2"
42" N/A 5 1/4" 5 7/8" 6 1/4"
24" 6# 20" 10 3/8" 12" 15 7/8"
48" N/A 5 1/8" 5 3/4" 6 1/8"
32" 8# 21" 11" 12" 16 1/4"
54" N/A 4 7/8" 5 5/8" 6 1/8"
36" 9# 22" 11 1/2" 12" 16 5/8"
60" N/A 4 3/4" 5 5/8" 6 1/8"
Top of washer 23" 12" 12" 17"
66" N/A N/A 5 1/2" 6" 42" 11#
to top of 24" 12 5/8" 12" 17 3/8"
72" N/A N/A 5 3/8" 6" 48" 13#
torque arm 25" 13 1/8" 12" 17 3/4"
78" N/A N/A 5 1/4" 5 7/8" 54" 14# 26" 13 5/8" 12" 18 1/8"
84" N/A N/A 5 1/8" 5 7/8" 60" 16# 27" 14 1/8" 12" 18 1/2"
90" N/A N/A N/A 5 3/4"
66" 17# 28" 14 5/8" 12" 18 7/8"
96" N/A N/A N/A 5 5/8"
72" 19# 29" 15 1/4" 12" 19 3/8"
102" N/A N/A N/A 5 1/2"
78" 21# 30" 15 5/8" 12" 19 3/4"
108" N/A N/A N/A 5 1/2"
31" 16 1/8" 12" 20 1/8"
114" N/A N/A N/A 5 3/8" 84" 22#
32" 16 3/4" 12" 20 5/8"
Shading indicates preferred spring option. 90" 24#
33" 17 1/4" 12" 21"
PSI setting is based on
Specifications: 34" 17 3/4" 12" 21 3/8"
the belt width.
35" 18 1/4" 12" 21 7/8"
• Maximum Belt Speed............................................1000 FPM (5m/s) 36" 18 3/4" 12" 22 1/4"
• Temperature Rating (TuffShear)..........................-30°F to 180°F (-35°C to 82°C) 37" 19 3/8" 12" 22 3/4"
• Temperature Rating (TuffShear High Temp)......Up to 275°F (135°C) with spikes to 325°F (164°C) 38" 19 3/4" 12" 23 1/8"
• Minimum Pulley Diameter....................................16" (400mm) 39" 20 3/8" 12" 23 5/8"
• Blade Height...........................................................10" (250mm) 40" 20 3/4" 12" 24"
41" 21 3/8" 12" 24 1/2"
• Usable Blade Wear Length..................................6" (150mm)
42" 21 7/8" 12" 25"
• Blade Material........................................................Polyurethane (proprietary blend for abrasion 43" 22 1/2" 12" 25 1/2"
resistance and long wear) 44" 23 1/8" 12" 26"
• Available for Belt Widths......................................24" to 96" (600 to 2400mm). Other sizes available 45" 23 5/8" 12" 26 1/2"
upon request. 46" 24 1/8" 12" 27"
47" 24 3/4" 12" 27 1/2"
• CEMA Cleaner Rating............................................Class 4
48" 25 1/4" 12" 28"
Replacement MMP
Parts List
15
4
3
Replacement Parts 2
ORDERING ITEM WT. 15
24" (600mm) Center Pole MMPCP24 76458 34.4
30" (750mm) Center Pole MMPCP30 76459 43.0 1
8
1 6
6a
60" (1500mm) Center Pole MMPCP60 76464 85.9 5 6b
9 7
7a
96" (2400mm) Center Pole MMPCP96 77722 137.5 7b
2 Extender Pole Kit (2 ea.) MHP-EP 76392 54.0 16
12
4 Blade Pin Kit* (1 ea.) MMPBPK 76466 0.8
6 Tension Spring - Purple (1 ea.)
for blades 24" (600mm)
QMTS-P 75845 0.6
6a Tension Spring - White (1 ea.) PSTS-W 75898 1.7

for blades 30" - 90" (750 - 2250mm) 11
6b Tension Spring - Gold (1 ea.)
QMTS-G 76484 2.5
for blades 54" - 78" (1350 - 1950mm)
Tension Spring - Silver (1 ea.) 13
6c for blades 84-90" (2100-2350mm)
PSTS-S 75899 3.0
7 Bushing Kit - Purple (2 ea.) QMTBK-P 76097 0.1 14
7a Bushing Kit - White & Silver (2 ea.) QMTBK-W 76098 0.2
9 Torsion Arm Kit* (1 ea.) PSTA 75896 11.4
10 Jam Nut Kit, QMT Tensioner JNK-C 79893 0.3 Spring Tensioner Selection Chart
QMT Spring Tensioner* - Purple CLEANER BLADE 76074 76075 76483 79039
- (incl. 1 ea. Items 5, 6, 7, 8, & 9) QMT-P 76074 20.4 WIDTH QMT-P QMT-W QMT-G QMT-S
for blades 18" - 24" (450 - 600mm)
TuffShear 18" - 24"
QMT Spring Tensioner* - White X
- (incl. 1 ea. Items 5, 6a, 7a, 8, & 9) QMT-W 76075 21.8 (450 - 600mm)
for blades 30" - 48" (750 - 1200mm) TuffShear 30" - 48"
X
QMT Spring Tensioner* - Gold (750 - 1200mm)
- (incl. 1 ea. Items 5, 6b, 7b, 8, & 9) QMT-G 76483 23.2 TuffShear 54" - 78"
for blades 54" - 78" (1350 - 1950mm) X
(1350 - 1950mm)
QMT Spring Tensioner* - Silver TuffShear 84" - 90"
- (incl. 1 ea. Items 5, 6c, 7a, 8 & 9) QMT-S 79039 20.3 X
blades 84-90 (2100-2350mm) (2100 - 2250mm)
11 Air/Water Bag (1 ea.) AWTB 75905 3.8
12 Mounting Base (1ea.) AWTMB 75906 22.9
13 Torque Arm* (1 ea.) AWTA 75907 11.6
14 Hose Kit (50’ of hose and 6 hose clamps) AWTHK 75909 6.7
15 PAT Control Box 60 psi PACB60 78683 11.0
16 AWT Pole Bearing Assy AWTPBA 90000 2.3
(for cleaners shipped after 4/2016)
- PAT Kit- AWT Tensioner w/ Control Box PAK 78705 86.2

(includes 2 ea. Items 11,12,13,14 & 1 ea. Item 15)
AWT Air/Water Tensioner w/o Control
- AWTNCB 76069 75.2
Box (includes 2 ea. Items 11,12,13 & 14)
*Hardware Included U.S. Patent No. D482,508S

Replacement Stainless Steel MMP
Parts List
4
3
8 2
1
Replacement Parts
ORDERING ITEM WT.
6
24" (600mm) SS Center Pole MMPCP24-S/S 77590 34.4 6a
5
30" (750mm) SS Center Pole MMPCP30-S/S 77591 43.0 9 7 6b
36" (900mm) SS Center Pole MMPCP36-S/S 77592 51.6 7a
42" (1050mm) SS Center Pole MMPCP42-S/S 77593 60.1 7b
48" (1200mm) SS Center Pole MMPCP48-S/S 77594 68.7
1
2 SS Extender Pole Kit (2 ea.) MHP-EP-S/S 77599 54.0
3 SS Mounting Plate Kit* (2 ea.) MSPMPK-S/S 77582 8.3
4 SS Blade Pin Kit* (1 ea.) MMPBPK-S/S 77600 0.8
5 SS Pivot Arm Kit* (1 ea.) QMTPAK-S/S 77587 4.3
6 SS Tension Spring - Purple (1 ea.) QMTS-P-S/S 77450 0.6
for blades 24" (600mm)
6a SS Tension Spring - White (1 ea.)

QMTS-W-S/S 77451 1.7
for blades 30" - 48" (750 - 1200mm)
6b SS Tension Spring - Gold (1 ea.)

QMTS-G-S/S 77452 2.5
for blades 54" - 78" (1350 - 1950mm)
CLEANER BLADE 77584 77585 77586 79059
6c SS Tension Spring - Silver (1 ea.) QMTS-S-S/S 79056 3.1
for blades 84"-90" (2100-2250mm) WIDTH QMT-P-S/S QMT-W-S/S QMT-G-S/S QMT-S-S/S
7 Bushing Kit - Purple (2 ea.) QMTBK-P 76097 0.1 TuffShear 18" - 24"
X
(450 - 600mm)
7a Bushing Kit - White and Silver (2 ea.) QMTBK-W 76098 0.2
TuffShear 30" - 48"
7b Bushing Kit - Gold (2 ea.) QMTBK-G 76540 0.3 X
(750 - 1200mm)
8 SS Pivot Shaft Bracket Kit* (1 ea.) QMTPSBK-S/S 77588 4.3 TuffShear 54" - 78"
X
9 SS Torsion Arm Kit* (1 ea.) PSTA-S/S 77442 11.4 (1350 - 1950mm)
SS QMT Spring Tensioner* - Purple TuffShear 84"-90"
X
- (incl. 1 ea. Items 5, 6, 7, 8, & 9) QMT-P-S/S 77584 20.4 (2100-2250mm)
for blades 18" - 24" (450 - 600mm)
SS QMT Spring Tensioner* - White

- (incl. 1 ea. Items 5, 6a, 7a, 8, & 9) QMT-W-S/S 77585 21.8
for blades 30" - 48" (750 - 1200mm)
SS QMT Spring Tensioner* - Gold

- (incl. 1 ea. Items 5, 6b, 7b, 8, & 9) QMT-G-S/S 77586 23.2
for blades 54" - 78" (1350 - 1800mm)
SS QMT Spring Tensioner* - Silver

- (incl. 1 ea. Items 5, 6c, 7a, 8 & 9) QMT-S-S/S 79059 24.6
for blades 84"-90" (2100-2250mm)
*Hardware Included
Product Ordering MHP
Mine Tough Heavy-Duty Precleaner
Information
BELT WIDTH BLADE WIDTH ORDERING ITEM WT. BELT WIDTH BLADE WIDTH ORDERING ITEM WT.
in. mm in. mm NUMBER CODE LBS in. mm in. mm NUMBER CODE LBS
24 600 18 450 MHP-624 77703 249.4 30 750 18 450 MHP-1230 77713 258.0
30 750 24 600 MHP-630 77704 267.6 36 900 24 600 MHP-1236 77714 276.2
36 900 30 750 MHP-636 77705 285.8 42 1050 30 750 MHP-1242 77715 294.3
42 1050 36 900 MHP-642 77706 304.0 48 1200 36 900 MHP-1248 77716 312.6
48 1200 42 1050 MHP-648 77707 322.2 54 1350 42 1050 MHP-1254 77717 330.8
54 1350 48 1200 MHP-654 77708 341.7 60 1500 48 1200 MHP-1260 77718 350.3
60 1500 54 1350 MHP-660 77709 359.9 72 1800 60 1500 MHP-1272 77719 386.8
72 1800 66 1650 MHP-672 77710 396.4 84 2100 72 1800 MHP-1284 77720 432.2
84 2100 78 1950 MHP-684 77711 432.9 96 2400 84 2100 MHP-1296 77721 477.6
96 2400 90 2250 MHP-696 77712 469.4
36 900 18 450 MHP-1836 78591 266.6 42 1050 18 450 MHP-2442 78669 275.1
42 1050 24 600 MHP-1842 78592 284.7 48 1200 24 600 MHP-2448 78670 243.3
48 1200 30 750 MHP-1848 78593 302.9 54 1350 30 750 MHP-2454 78671 311.5
54 1350 36 900 MHP-1854 78594 321.2 60 1500 36 900 MHP-2460 78672 329.8
60 1500 42 1050 MHP-1860 78595 339.4 72 1800 48 1200 MHP-2472 78673 367.5
72 1800 54 1350 MHP-1872 78596 377.1 84 2100 60 1500 MHP-2484 78674 404.0
84 2100 66 1650 MHP-1884 78597 413.6 96 2400 72 1800 MHP-2496 78675 440.4
96 2400 78 1950 MHP-1896 78598 450.1
Product Notes:
• Recommended for heavy-duty conveyor applications.
width. In most cases a blade size of belt width minus 6" may be the best solution.
• Each cleaner pole is retrofittable for four blade sizes (belt width - 6", - 12", - 18" or - 24") (-150mm, -300mm, -450mm, -600mm).
131).
• Visual Tension Check: No guesswork on blade tensioning. Measure the spring and adjust to specified length per blade width
to restore optimal tensioning.

Product Ordering MHP
Information with Portable Air Tensioner (PAT)
PAT Control Box Tank sold separately.

See page 49 for options.
24 600 18 450 MHP-624P 78599 249.6 30 750 18 450 MHP-1230P 78609 258.2
30 750 24 600 MHP-630P 78600 267.8 36 900 24 600 MHP-1236P 78610 276.4
36 900 30 750 MHP-636P 78601 286.0 42 1050 30 750 MHP-1242P 78611 294.5
42 1050 36 900 MHP-642P 78602 304.2 48 1200 36 900 MHP-1248P 78612 312.8
48 1200 42 1050 MHP-648P 78603 322.4 54 1350 42 1050 MHP-1254P 78613 331.0
54 1350 48 1200 MHP-654P 78604 340.6 60 1500 48 1200 MHP-1260P 78614 349.2
60 1500 54 1350 MHP-660P 78605 358.8 72 1800 60 1500 MHP-1272P 78615 385.7
72 1800 66 1650 MHP-672P 78606 395.3 84 2100 72 1800 MHP-1284P 78616 422.1
84 2100 78 1950 MHP-684P 78607 431.8 96 2400 84 2100 MHP-1296P 78617 458.5
96 2400 90 2250 MHP-696P 78608 468.3
36 900 18 450 MHP-1836P 78618 266.8 42 1050 18 450 MHP-2442P 78676 275.3
42 1050 24 600 MHP-1842P 78619 284.9 48 1200 24 600 MHP-2448P 78677 293.5
48 1200 30 750 MHP-1848P 78620 303.1 54 1350 30 750 MHP-2454P 78678 311.7
54 1350 36 900 MHP-1854P 78621 321.4 60 1500 36 900 MHP-2460P 78679 330.0
60 1500 42 1050 MHP-1860P 78622 339.6 72 1800 48 1200 MHP-2472P 78680 366.4
72 1800 54 1350 MHP-1872P 78623 376.0 84 2100 60 1500 MHP-2484P 78681 402.9
84 2100 66 1650 MHP-1884P 78624 412.5 96 2400 72 1800 MHP-2496P 78682 439.3
96 2400 78 1950 MHP-1896P 78625 449.0
Product Notes:
• Recommended for heavy-duty conveyor applications.
• Material Path Option: Fit the blade width to the belt’s material path. The material path is typically the center 2/3 of the
belt width. In most cases a blade size of belt width minus 6" (150mm) may be the best solution.
• Each cleaner pole is retrofittable for four blade sizes (belt width minus 6" (150mm), minus 12" (300mm), minus 18"
(450mm) or minus 24" (600mm)).
• Pole Length: Belt width plus 54" (1350mm). For longer requirements see Installation Accessories - Pole Extender Kit
(page 131).
• Check tension from regulator in control box. Adjust according to air tension per blade width for optimal tensioning.
Information
Air Tanks
ORDERING ITEM WT.
NUMBER CODE LBS.
PAT1 78684 13.0
PAT2 78685 13.0
1
ORDERING ITEM WT.
2 PATHK 78794 1.5
Product Notes:

PATHK* 78794 1.5 PANK* 78799 5.0
*incl. 10' hose, 1' poly spiral wrap, 2 hose clamps *incl. Nitrogen Regulator, 10' hose, 2 hose clamps

Product Ordering MegaShear™
Replacement Blades
Information

Material Path
Blade Width Selection Belt Width

BELT WIDTH BELT WIDTH BELT WIDTH BELT WIDTH Blade Width
BELT WIDTH - 6" (150mm) - 12" (300mm) - 18" (450mm) - 24" (600mm)
24 600 18 450 N/A N/A N/A N/A N/A N/A
30 750 24 600 18 450 N/A N/A N/A N/A
36 900 30 750 24 600 18 450 N/A N/A Belt Width Minus 12" (300mm)
42 1050 36 900 30 750 24 600 18 450 Material Path
48 1200 42 1050 36 900 30 750 24 600
54 1350 48 1200 42 1050 36 900 30 750 Belt Width
60 1500 54 1350 48 1200 42 1050 36 900 Blade Width
72 1800 66 1650 60 1500 54 1350 48 1200
84 2100 78 1950 72 1800 66 1650 60 1500
96 2400 90 2250 84 2100 78 1950 72 1800
Ordering Information Belt Width Minus 18" (450mm)

MegaShear™ Replacement Blades Material Path
BLADE WIDTH
ORDERING ITEM WT. Belt Width
in. mm NUMBER CODE LBS
Blade Width
18 450 MRB18 77531 28.9
24 600 MRB24 77532 38.5
30 750 MRB30 77533 48.1
36 900 MRB36 77534 57.8
42 1050 MRB42 77535 67.4 Belt Width Minus 24" (600mm)
48 1200 MRB48 77536 77.0
Material Path
54 1350 MRB54 77537 86.6
60 1500 MRB60 77538 96.3 Belt Width
66 1650 MRB66 77539 105.9 Blade Width
72 1800 MRB72 77540 115.5
78 1950 MRB78 77541 125.1
84 2100 MRB84 77542 134.7
90 2250 MRB90 77543 144.3
Product Notes:
• MegaShear™ blades are made of a special long-wearing polyurethane.
Specifications MHP
& Guidelines

MAX OVERALL CENTER POLE MAXIMUM
in. mm in. mm in. mm in. mm *
24 600 78 1950 24 600 66 1650
30 750 84 2100 30 750 72 1800
36 900 90 2250 36 900 78 1950
42 1050 96 2400 42 1050 84 2100
54 1350 108 2700 54 1350 96 2400 Pole Length
60 1500 114 2850 60 1500 102 2550
72 1800 126 3150 72 1800 114 2850 *Each pole size can be used with a blade size either belt
84 2100 138 3450 84 2100 126 3150 width minus 6" (150mm), belt width minus 12" (300mm), or
96 2400 150 3750 96 2400 138 3450 belt width minus 18" (450mm).
* For special extra long pole length requirements, a Pole Extender Kit (#76024)
is available that provides 30" (750mm) of extended pole length. Pole Diameter -
2-7/8" (73mm). (page 131)

Installation
HORIZONTAL VERTICAL
CLEARANCE CLEARANCE Vertical
REQUIRED REQUIRED
in. mm in. mm
8 200 19.5 488
Horizontal
Spring Length Chart
Blade White Silver Red
Width Springs Springs Springs Pressure Chart (PAT)
18" 5 3/4" 6 3/8" 6 1/2"
24" 5 3/8" 6 1/4" 6 3/8"
Blade Width PSI
30" 5 1/8" 6 1/8" 6 3/8" 18" 8#
36" 4 3/4" 6 1/8" 6 1/4" 24" 10#
42" 4 1/2" 6" 6 1/4" 30" 13#
48" N/A 5 7/8" 6 1/8" 36" 15#
54" N/A 5 3/4" 6 1/8" 42" 18#
60" N/A 5 3/4" 6" Top of washer 48" 20#
66" N/A 5 5/8" 6"
72" N/A 5 1/2" 5 7/8" to top of 54" 23#
torque arm 60" 25#
78" N/A 5 1/8" 5 7/8"
84" N/A N/A 5 3/4" 66" 28#
90" N/A N/A 5 5/8" 72" 31#
96" N/A N/A 5 1/2" 78" 33#
102" N/A N/A 5 1/2" 84" 36#
Shading indicates preferred spring option. 90" 38#
Specifications:
• Maximum Belt Speed............................................1500 FPM (7.5m/s)
• Temperature Rating...............................................-30°F to 180°F (-35°C to 82°C)
• Minimum Pulley Diameter....................................20" (500mm)
• Blade Height...........................................................12.25" (306mm)
• Usable Blade Wear Length..................................8" (200mm)
• Blade Material........................................................Polyurethane 90 durometer (proprietary blend for abrasion
resistance and long wear)
• Available for Belt Widths......................................24" to 96" (600 to 2400mm). Other sizes available upon request.

Specifications MHP
& Guidelines
Pole Location Specs
Move Dim. C
on arc
A X
Y
C

X & Y Chart for Pole Location X & Y Chart for Pole Location X & Y Chart for Pole Location
Pulley Diameter Pulley Diameter Pulley Diameter
(including belt (including belt (including belt
and lagging) X Y C and lagging) X Y C and lagging) X Y C
20" 10" 14-3/8" 17-1/2" 45" 22-1/2" 14-3/8" 27 " 70" 36-1/4" 14-3/8" 39 1/2"
21" 10-1/2" 14-3/8" 17-3/4" 46" 23" 14-3/8" 27 1/2" 71" 36-3/4" 14-3/8" 40"
22" 11" 14-3/8" 18-1/8" 47" 23-1/2" 14-3/8" 28" 72" 37-3/8" 14-3/8" 40 1/2"
23" 11-1/2" 14-3/8" 18-3/8" 48" 24" 14-3/8" 28 1/2" 73" 37-7/8" 14-3/8" 41"
24" 12" 14-3/8" 18-3/4" 49" 24-5/8" 14-3/8" 29" 74" 38-3/8" 14-3/8" 41 1/2"
25" 12-1/2" 14-3/8" 19" 50" 25-1/8" 14-3/8" 29 1/2" 75" 38-7/8" 14-3/8" 42"
26" 13" 14-3/8" 19-3/8" 51" 25-3/4" 14-3/8" 30" 76" 39-1/2" 14-3/8" 42 1/2"
27" 13-1/2" 14-3/8" 19-3/4" 52" 26-3/8" 14-3/8" 30 1/2" 77" 40" 14-3/8" 43"
28" 14" 14-3/8" 20-1/8" 53" 26-7/8" 14-3/8" 31" 78" 40-1/2" 14-3/8" 43 1/2"
29" 14-1/2" 14-3/8" 20-3/8" 54" 27-1/2" 14-3/8" 31 1/2" 79" 41" 14-3/8" 44"
30" 15" 14-3/8" 20-3/4" 55" 28-1/8" 14-3/8" 32" 80" 41-5/8" 14-3/8" 44 1/2"
31" 15-1/2" 14-3/8" 21-1/8" 56" 28-5/8" 14-3/8" 32 1/2" 81" 42-1/8" 14-3/8" 45"
32" 16" 14-3/8" 21-1/2" 57" 29-1/8" 14-3/8" 33" 82" 42-5/8" 14-3/8" 45 1/2"
33" 16-1/2" 14-3/8" 21-7/8" 58" 29-3/4" 14-3/8" 33 1/2" 83" 43-1/8" 14-3/8" 46"
34" 17" 14-3/8" 22-1/4" 59" 30-1/4" 14-3/8" 34" 84" 43-3/4" 14-3/8" 46 1/2"
35" 17-1/2" 14-3/8" 22-5/8" 60" 30-7/8" 14-3/8" 34 1/2"
36" 18" 14-3/8" 23" 61" 31-3/8" 14-3/8" 35"
37" 18-1/2" 14-3/8" 23-3/8" 62" 31-7/8" 14-3/8" 35 1/2"
38" 19" 14-3/8" 23-7/8" 63" 32-1/2" 14-3/8" 36"
39" 19-1/2" 14-3/8" 24-1/4" 64" 33" 14-3/8" 36 1/2"
40" 20" 14-3/8" 24-5/8" 65" 33-1/2" 14-3/8" 37"
41" 20-1/2" 14-3/8" 25" 66" 34-1/8" 14-3/8" 37 1/2"
42" 21" 14-3/8" 25-1/2" 67" 34-5/8" 14-3/8" 38"
43" 21-1/2" 14-3/8" 25-7/8" 68" 35-1/8" 14-3/8" 38 1/2"
44" 22" 14-3/8" 26-1/2" 69" 35-3/4" 14-3/8" 39"
Replacement MHP
Parts List
15
2
Replacement Parts 1
9
ORDERING ITEM WT.
4
42" (1050mm) Center Pole MMPCP42 76461 60.1 5 6a
48" (1200mm) Center Pole MMPCP48 76462 68.7 6b
1
11
60" (1500mm) Center Pole MMPCP60 76464 85.9 14 15
2 Extender Pole Kit (2 ea.) MHP-EP 76392 54.0
3 Mounting Plate Kit* (2 ea.) MHPMPK 77727 44.4
10
4 Blade Pin Kit* (1 ea.) MHPBPK 77728 0.8
5 Torque Pivot Kit* (1 ea.) PTPK 75897 7.0
12
6 Tension Spring - White (1 ea.)
for blades 18" - 42" (450 - 1050mm)
PSTS-W 75898 1.7
13
6a Tension Spring - Silver (1 ea.)
for blades 48" - 78" (1200 - 1950mm)
PSTS-S 75899 3.0
6b Tension Spring - Red (1 ea.)

for blades 84" - 90" (2100 - 2250mm)
PSTS-R 77726 4.3
7 Torque Arm Kit* (1 ea.) PSTA 75896 11.4
8 Bushing Kit (2 ea.) QMTBK-W 76098 0.2
9 Jam Nut Kit PST Tensioner JNK-D 79894 0.3
PST Spring Tensioner* - White
- PST2-W 77723 86.1
(incl. 2 ea. Items 3, 5, 6, 7, & 8)
for blades 18" - 42" (450 - 1050mm)
PST Spring Tensioner* - Silver 77723 77724 77725
- (incl. 2 ea. Items 3, 5, 6a, 7, & 8) PST2-S 77724 87.4 CLEANER BLADE WIDTH PST2-W PST2-S PST2-R
for blades 48" - 78" (1200 - 1950mm)
MegaShear 18" - 42" (450 - 1050mm) X
PST Spring Tensioner* - Red
- (incl. 2 ea. Items 3, 5, 6b, 7 & 8) PST2-R 77725 88.8 MegaShear 48" - 78" (1200 - 1950mm) X
for blades 84" - 90" (2100 - 2250mm) MegaShear 84" - 90" (2100 - 2250mm) X
*Hardware Included
PAT Air & Nitrogen Tensioner Replacement Parts

ORDERING ITEM WT.
11 Mounting Base (1 ea.) AWTMB 75906 22.9
13 Hose Kit (50' of hose and 6 hose clamps) AWTHK 75909 6.7
14 PAT Control Box 60 psi PACB60 78683 11.0
15 Pole Bearing Assy
AWTPBA 90000 2.3
- PAT Kit- AWT Tensioner w/Control Box PAK 78705 86.2

(includes 2 ea. Items 10, 11, 12 & 1 ea. Items 13, 14)
AWT Air/Water Tensioner w/o Control Box
- (includes 2 each items 10, 11, 12 & 1 each item 13)
AWTNCB 76069 75.2
*Hardware Included

Product Ordering MHCP
Heavy-Duty Cartridge Precleaner
Information
MHCP HD Cartridge Precleaner

with Spring Tensioner (PST)
BLADE
BELT WIDTH COVERAGE ORDERING ITEM WT.
24 600 18 450 MHCP-24S 75929 192.1
30 750 24 600 MHCP-30S 75930 207.2
36 900 30 750 MHCP-36S 75931 222.4
42 1050 36 900 MHCP-42S 75932 237.4
48 1200 42 1050 MHCP-48S 75933 252.5
54 1350 48 1200 MHCP-54S 75934 267.6
60 1500 54 1350 MHCP-60S 75935 282.7
72 1800 66 1650 MHCP-72S 75936 312.8
84 2100 78 1950 MHCP-84S 76800 364.9
96 2400 90 2250 MHCP-96S 78955 417.0
MHCP HD Cartridge Precleaner

with Portable Air Tensioner (PAT)
BLADE
24 600 18 450 MHCP-24P 78723 192.2
30 750 24 600 MHCP-30P 78724 207.3
36 900 30 750 MHCP-36P 78725 222.4
42 1050 36 900 MHCP-42P 78726 237.4 Tank sold separately.
48 1200 42 1050 MHCP-48P 78727 252.5 See page 55 for options.
54 1350 48 1200 MHCP-54P 78728 267.6
60 1500 54 1350 MHCP-60P 78729 282.7
72 1800 66 1650 MHCP-72P 78730 312.8
84 2100 78 1950 MHCP-84P 78731 364.9
96 2400 90 2250 MHCP-96P 78959 417.0
Product Notes:
• Heavy-duty design with massive SuperShear™ blades for constant cleaning power on abusive beltlines.
• Blade width equals belt width minus 6" (150mm). Can be adjusted to belt’s material path.
• Pole Length: Belt width plus 58" (1450mm). For longer requirements see Installation Accessories - Pole Extender Kit (page 131).
• Tensioner Options: 1) PST Spring Tensioner for self-adjusting tensioning with easy retensioning adjustments; 2) AWT Air/Water
Tensioner for automatic tensioning throughout the life of the blades; 3) NT Nitrogen Tensioner for automatic tensioning with
a nitrogen tank; 4) Portable Air Tensioner used for constant, automatic tension throughout the life of the blades. Can be used
with site available air lines or with the add-on air tank.
Information
Air Tanks
ORDERING ITEM WT.
NUMBER CODE LBS.
PAT1 78684 13.0
PAT2 78685 13.0
1
ORDERING ITEM WT.
2 PATHK 78794 1.5
Product Notes:

PATHK* 78794 1.5 PANK* 78799 5.0
*incl. 10' hose, 1' poly spiral wrap, 2 hose clamps *incl. Nitrogen Regulator, 10' hose, 2 hose clamps

Optional Assemblies, MHCP
Tensioners & Kits
Blade/Pole Assemblies
(Includes blades, cartridge, center pole and 2 extender poles)
BELT WIDTH ORDERING ITEM WT.
24 600 MHCP-BPA24 75945 106.0
30 750 MHCP-BPA30 75946 121.1
36 900 MHCP-BPA36 75947 136.2
42 1050 MHCP-BPA42 75948 151.2
48 1200 MHCP-BPA48 75949 166.3
54 1350 MHCP-BPA54 75950 181.4
60 1500 MHCP-BPA60 75951 196.5
72 1800 MHCP-BPA72 75952 226.6
84 2100 MHCP-BPA84 76809 264.4
96 2400 MHCP-BPA96 78956 302.2
Tensioners
(Includes tensioners for both pole ends)
ORDERING ITEM WT.
DESCRIPTION NUMBER CODE LBS.
PST Spring Tensioner - White
PST2-W 77723 86.1
for belts 24" - 48" (600-1200mm)
PST Spring Tensioner - Silver
PST2-S 77724 86.2
for belts 54" - 84" (1350-2100mm)
PST Spring Tensioner - Red
PST2-R 77725 86.2 PST Spring Tensioner
for belts 96" (2400mm) PAT AirTensioner and
PAT Kit- PAT Tensioner PAK 78705 86.2 Control Box
Blade Cartridge Kits

(Includes blades, cartridge, and mounting bolts)
24 600 MHCP-BCK24 75953 33.0
30 750 MHCP-BCK30 75954 44.0
36 900 MHCP-BCK36 75955 55.0
42 1050 MHCP-BCK42 75956 66.0
48 1200 MHCP-BCK48 75957 77.0
54 1350 MHCP-BCK54 75958 88.0
60 1500 MHCP-BCK60 75959 99.0
72 1800 MHCP-BCK72 75960 121.0
84 2100 MHCP-BCK84 76810 141.2
Blade Cartridge Kit
96 2400 MHCP-BCK96 78957 161.4
NOTE: For easy blade changeout, remove cartridge with worn
blades and replace with new blade cartridge kit. New blades
can then be installed in the old cartridge for the next changeout.
Specifications MHCP
& Guidelines
Telescoping Pole Length Specifications
Maximum Overall Pole Length
in. mm in. mm in. mm in. mm Maximum Conveyor Span
24 600 82 2050 28 700 66 1650
30 750 88 2200 34 850 72 1800
36 900 94 2350 40 1000 78 1950 Center Pole Length
42 1050 100 2500 46 1150 84 2100
48 1200 106 2650 52 1300 90 2250
54 1350 112 2800 58 1450 96 2400 Pole Location Specs
60 1500 118 2950 64 1600 102 2550
72 1800 130 3250 76 1900 114 2850
84 2100 142 3550 88 2200 126 3150
96 2400 154 3850 100 2500 138 3450
A X
Clearance Guidelines for C Y

Move Dim.
Installation C on arc
CLEARANCE CLEARANCE
REQUIRED REQUIRED
in. mm in. mm
7 175 19 475
Pole Location Chart
Horizontal A X Y C
20" 10" 14 3/8" 17 1/2"
Air/Water or Nitrogen 21" 10 1/2" 14 3/8" 17 3/4"
Spring Length Chart Pressure Chart 22" 11" 14 3/8" 18 1/8"
Blade White Silver Red BLADE 23" 11 1/2" 14 3/8" 18 3/8"
Width Springs Springs Springs WIDTH BLADES PSI 24" 12" 14 3/8" 18 3/4"
18" 5 3/4" 6 3/8" 6 1/2" 18" 3 8# 25" 12 1/2" 14 3/8" 19"
24" 5 3/8" 6 1/4" 6 3/8" 24" 4 10# 26" 13" 14 3/8" 19 3/8"
30" 5 1/8" 6 1/8" 6 3/8" 30" 5 13# 27" 13 1/2" 14 3/8" 19 3/4"
36" 4 3/4" 6 1/8" 6 1/4" 36" 6 15# 28" 14" 14 3/8" 20 1/8"
42" 4 1/2" 6" 6 1/4" 29" 14 1/2" 14 3/8" 20 3/8"
42" 7 18#
48" N/A 5 7/8" 6 1/8" Top of 30" 15" 14 3/8" 20 3/4"
54" N/A 5 3/4" 6 1/8" 48" 8 20#
washer to 31" 15 1/2" 14 3/8" 21 1/8"
60" N/A 5 3/4" 6" 54" 9 23#
top of 32" 16" 14 3/8" 21 1/2"
66" N/A 5 5/8" 6" 60" 10 25#
72" N/A 5 1/2" 5 7/8" torque arm 66" 11 28#
33" 16 1/2" 14 3/8" 21 7/8"
78" N/A 5 1/8" 5 7/8" 34" 17" 14 3/8" 22 1/4"
72" 12 31#
84" N/A N/A 5 3/4" 35" 17 1/2" 14 3/8" 22 5/8"
78" 13 33#
90" N/A N/A 5 5/8" 36" 18" 14 3/8" 23"
84" 14 36#
96" N/A N/A 5 1/2" 37" 18 1/2" 14 3/8" 23 3/8"
102" N/A N/A 5 1/2" 90" 15 38#
38" 19" 14 3/8" 23 7/8"
Shading indicates preferred spring option. PSI setting is based on the number of
blades on the cleaner, not the belt width. 39" 19 1/2" 14 3/8" 24 1/4"
40" 20" 14 3/8" 24 5/8"
41" 20 1/2" 14 3/8" 25"
42" 21" 14 3/8" 25 1/2"
Specifications: 43" 21 1/2" 14 3/8" 25 7/8"
• Maximum Belt Speed...................................... 1200 FPM (6m/s) 44" 22 1/4" 14 3/8" 26 1/2"
• Temperature Rating......................................... -30°F to 180°F (-35°C to 82°C) 45" 22 7/8" 14 3/8" 27"
• Minimum Pulley Diameter.............................. 20" (500mm) 46" 23 1/2" 14 3/8" 27 1/2"
• Blade Height..................................................... 14" (350mm) 47" 24" 14 3/8" 28"
• Usable Blade Wear Length............................ 8" (200mm) 48" 24 5/8" 14 3/8" 28 1/2"
• Blades................................................................ Polyurethane (proprietary blend for
............................................................................ abrasion resistance and long wear)
• Available for Belt Widths................................ 24" to 96" (600 to 2400mm).
............................................................................ Other sizes available upon request
• CEMA Cleaner Rating...................................... Class 5

Replacement MHCP
Parts List
3
ORDERING ITEM WT. 4
1
24" (600mm) Center Pole* MHP-CP24 75961 19.0 2
30" (750mm) Center Pole* MHP-CP30 75962 23.1
1
72" (1800mm) Center Pole* MHP-CP72 75968 51.6 Blades Required
84" (2100mm) Center Pole* MHP-CP84 76811 60.2 6
96" (2400mm) Center Pole* MHP-CP96 78958 68.8 per Belt Width
2 MHCP Extender Poles (2 ea.) MHP-EP 76392 54.0 BELT WIDTH BLADES
5
3 SuperShear™ Blade SSRB 75978 6.6 in. mm REQUIRED
24" (600mm) 2-Piece Blade Cartridge* MHCP-2BC24 76638 13.2 24 600 3
36" (900mm) 2-Piece Blade Cartridge* MHCP-2BC36 76640 22.0
36 900 5
42 1050 6
4 48 1200 7
54 1350 8
60 1500 9
72 1800 11
5 MHCP Cartridge Handle* MHCP-CH 76393 0.4 96 2400 15
6 MHCP Cartridge Blade Stop* MHCP-BS 76394 0.4 Blades and cartridges can be purchased
*Hardware Included separately (see chart at left) or
preassembled as a Blade Cartridge Kit
PST Spring Tensioner Replacement Parts (page 56).
ORDERING ITEM WT.
7 Mounting Plate Kit* (2 ea.) MHPMPK 77727 44.4 16
8 Torque Arm* (1 ea.) PSTA 75896 11.4
7
9 Torque Pivot Kit (1 ea.) (no spring) PTPK 75897 7.0
10
Tension Spring - White (1 ea.)
PSTS-W 75898 1.7 10a
for belts 24" - 48" (600-1200mm)
Tension Spring - Silver (1 ea.) 10
10a PSTS-S 75899 3.0
for belts 54" - 84" (1350-2100mm)
Tension Spring - Red (1 ea.) 11
10b PSTS-R 77726 3.0
for belts 96" (2400mm)
Bushing Kit (2 ea.) (for White, Silver, & Red
11 QMTBK-W 76098 0.2
Tensioners)
12 Jam Nut Kit PST Tensioner JNK-D 79894 0.3 12
PST Spring Tensioner* - White
– (includes 2 each items 7, 8, 9, 10 & 11) PST2-W 77723 86.1
for belts 24" - 48" (600-1200mm) 9
PST Spring Tensioner* - Silver
– (includes 2 each items 7, 8, 9, 10a & 11) PST2-S 77724 86.2
for belts 54" -84" (1350-2100mm) 8
PST Spring Tensioner* - Red
- (incl. 2 each items 7, 8, 9 ,10b &11 PST2-R 77725 86.2
*Hardware Included
Air/Water Tensioner Replacement Parts 16

18 14
ORDERING ITEM WT.
17
14 Mounting Base (1 ea.) AWTMB 75906 22.9
Pole Bearing Assy
16 AWTPBA 90000 2.3 13
17 Hose Kit (50' of hose and 6 hose clamps) AWTHK 75909 6.7
AWT Air/Water Tensioner w/o Control Box
– AWTNCB 76069 75.2
(includes 2 each items 12, 13, 14 & 1 each item 15)
18 PAT Control Box 60 psi PACB60 78683 11.0 15
PAT Kit - PAT Tensioner (includes 2 each items
– PAK 78705 86.2
12, 13, 14 & 1 each items 15 & 16)
*Hardware Included
Product Ordering MXP
Extreme-Duty Precleaner
Information
MXP Extreme-Duty Precleaner

Belt Width -6" (150mm)
with Spring Tensioner (XDST)
BLADE
42 1050 36 900 MXP-642 90393 659.0
48 1200 42 1050 MXP-648 90394 700.0
54 1350 48 1200 MXP-654 90395 742.0
60 1500 54 1350 MXP-660 90396 783.0
72 1800 66 1650 MXP-672 90397 869.0
84 2100 78 1950 MXP-684 90398 953.0
96 2400 90 2250 MXP-696 90399 1036.0
108 2700 102 2550 MXP-6108 90642 1120.0
120 3000 114 2850 MXP-6120 90400 1207.0
MXP Extreme-Duty Precleaner

Belt Width -12" (300mm)
with Spring Tensioner (XDST)
BLADE
42 1050 30 750 MXP-1242 90581 636.0
48 1200 36 900 MXP-1248 90582 679.0
54 1350 42 1050 MXP-1254 90583 720.0
60 1500 48 1200 MXP-1260 90584 763.0
72 1800 60 1500 MXP-1272 90585 849.0
84 2100 72 1800 MXP-1284 90586 933.0
96 2400 84 2100 MXP-1296 90587 1016.0
108 2700 96 2400 MXP-12108 90643 1100.0
120 3000 108 2700 MXP-12120 90588 1187.0
Replacement UltraShear™ Blades

BLADE WIDTH
ORDERING ITEM WT.
6 150 USB6 90410 20.0
12 300 USB12 90409 40.0
Product Notes:
• Heavy-duty design with massive UltraShear™ blades for constant cleaning power on abusive beltlines.
• Blade width options for belt width minus 6" (150mm) or belt width minus 12" (300mm). Can be adjusted to belt’s material path.
• Pole Length: Belt width plus 79" (2000mm).
• Tensioner: XDST Spring Tensioner

Specifications MXP
& Guidelines
CLEANER SIZE POLE LENGTH LENGTH CONVEYOR SPAN *
42 1050 121 3050 48 1200 105 2667
48 1200 127 3200 54 1350 111 2819
54 1350 133 3350 60 1500 117 2972
72 1800 151 3800 78 1950 135 3429
Pole Length
84 2100 163 4100 90 2250 147 3734
96 2400 175 4400 102 2550 159 4039 * 6" and 12" (150mm and 300mm) blade segments
108 2700 187 4700 114 2850 171 4343 can be configured to match material path.
120 3000 199 5000 126 3150 183 4648
Clearance Guidelines
for Installation
HORIZONTAL VERTICAL
CLEARANCE CLEARANCE
REQUIRED REQUIRED Vertical
in. mm in. mm
12 300 27 1/2 700
Spring Length Chart

BELT BLADE NO. OF PURPLE WHITE BLACK Horizontal
WIDTH COVERAGE BLADES SPRINGS SPRINGS SPRINGS
BELT WIDTH MINUS 6" (150mm)
42 1050 36 900 3 10 255 N/A N/A N/A N/A
48 1200 42 1050 3.5 9 1/2 240 10 7/8 280 N/A N/A
54 1350 48 1200 4 9 230 10 5/8 270 N/A N/A
60 1500 54 1350 4.5 8 1/2 215 10 3/8 265 N/A N/A
72 1800 66 1650 5.5 7 5/8 195 9 7/8 250 N/A N/A
84 2100 78 1950 6.5 6 3/4 170 9 3/8 240 10 3/4 270
96 2400 90 2250 7.5 5 3/4 145 8 7/8 225 10 3/8 265
Measure from top
108 2700 102 2550 8.5 N/A N/A 8 3/8 210 10 1/8 255
120 3000 114 2850 9.5 N/A N/A 7 7/8 200 9 3/4 250 of washer to top
BELT WIDTH MINUS 12" (300mm) of torque arm
42 1050 30 750 2.5 10 3/8 265 N/A N/A N/A N/A
48 1200 36 900 3 10 255 11 1/4 285 N/A N/A
54 1350 42 1050 3.5 9 1/2 240 10 7/8 280 N/A N/A
60 1500 48 1200 4 9 230 10 5/8 270 N/A N/A
72 1800 60 1500 5 8 1/8 205 10 1/8 260 N/A N/A
84 2100 72 1800 6 7 1/8 180 9 5/8 245 N/A N/A
96 2400 84 2100 7 6 1/4 160 9 1/8 230 10 1/2 270
108 2700 96 2400 8 N/A N/A 8 5/8 220 10 1/4 260
120 3000 108 2700 9 N/A N/A 8 1/8 205 9 7/8 250
Shading indicates preferred spring option.
Specifications:
• Maximum Belt Speed............................................2000 FPM (10 m/s)
• Minimum Pulley Diameter....................................48" (1200mm)
• Blade Height...........................................................19-3/8" (490mm)
• Usable Blade Wear Length..................................11-1/2" (290mm)
• Blade Material........................................................Polyurethane 93 durometer (proprietary blend for abrasion
resistance and long wear)
• Available for Belt Widths......................................42" to 120" (1050 to 3000mm). Other sizes available upon request.
Specifications MXP
& Guidelines
Pole Location Specs METRIC
X & Y Chart for Pole Location X & Y Chart for Pole Location (cont.)
Pulley Diameter Pulley Diameter
(including belt (including belt
and lagging) X Y C and lagging) X Y C
1225 520 665 845 1850 835 720 1100
1250 535 670 855 1875 845 725 1115
Pulley Diameter 1275 545 670 865 1900 860 725 1125
(incl. belt and 1300 560 675 875 1925 870 730 1135
lagging) 1325 570 675 885 1950 885 730 1145
Y 1350 585 675 895 1975 895 730 1155
1375 595 680 905 2000 910 735 1170
X
1400 610 680 915 2025 920 735 1180
1425 620 685 925 2050 935 740 1190
1450 635 685 935 2075 945 740 1200
C 1475 645 690 945 2100 960 745 1215
1500 660 690 955 2125 970 745 1225
1525 670 695 965 2150 985 750 1235
1550 685 695 975 2175 995 750 1245
1575 695 695 985 2200 1010 750 1260
1600 710 700 995 2225 1020 755 1270
1625 720 700 1005 2250 1035 755 1280
1650 735 705 1015 2275 1045 760 1290
1675 745 705 1025 2300 1060 760 1305
1700 760 710 1040 2325 1070 765 1315
1725 770 710 1050 2350 1085 765 1325
1750 785 710 1060 2375 1095 770 1340
1775 795 715 1070 2400 1110 770 1350
1800 810 715 1080 2425 1120 770 1360
1825 820 720 1090
IMPERIAL
X & Y Chart for Pole Location X & Y Chart for Pole Location (cont.)
Pulley Diameter Pulley Diameter
(including belt (including belt
and lagging) X Y C and lagging) X Y C
48 20 1/2 26 1/4 33 1/4 73 32 3/4 28 3/8 43 3/8
49 21 26 3/8 33 5/8 74 33 1/4 28 1/2 43 7/8
50 21 1/2 26 3/8 34 75 33 3/4 28 5/8 44 1/4
51 22 26 1/2 34 3/8 76 34 1/4 28 5/8 44 3/4
52 22 1/2 26 5/8 34 3/4 77 34 3/4 28 3/4 45 1/8
53 23 26 5/8 35 1/8 78 35 1/4 28 7/8 45 1/2
54 23 1/2 26 3/4 35 5/8 79 35 3/4 28 7/8 46
55 24 26 7/8 36 80 36 1/4 29 46 3/8
56 24 1/2 26 7/8 36 3/8 81 36 3/4 29 1/8 46 7/8
57 24 7/8 27 36 3/4 82 37 1/4 29 1/8 47 1/4
58 25 3/8 27 1/8 37 1/8 83 37 3/4 29 1/4 47 3/4
59 25 7/8 27 1/8 37 1/2 84 38 1/4 29 3/8 48 1/4
60 26 3/8 27 1/4 38 85 38 3/4 29 1/2 48 5/8
61 26 7/8 27 3/8 38 3/8 86 39 1/4 29 1/2 49 1/8
62 27 3/8 27 1/2 38 3/4 87 39 3/4 29 5/8 49 1/2
63 27 7/8 27 1/2 39 1/8 88 40 1/4 29 3/4 50
64 28 3/8 27 5/8 39 5/8 89 40 3/4 29 3/4 50 3/8
65 28 7/8 27 3/4 40 90 41 1/8 29 7/8 50 7/8
66 29 3/8 27 3/4 40 3/8 91 41 5/8 30 51 3/8
67 29 7/8 27 7/8 40 7/8 92 42 1/8 30 51 3/4
68 30 3/8 28 41 1/4 93 42 5/8 30 1/8 52 1/4
69 30 7/8 28 41 3/4 94 43 1/8 30 1/4 52 5/8
70 31 3/8 28 1/8 42 1/8 95 43 5/8 30 1/4 53 1/8
71 31 7/8 28 1/4 42 1/2 96 44 1/8 30 3/8 53 5/8
72 32 3/8 28 1/4 43

Replacement MXP
Parts List
3b 5
3a
13
2
12
9
1a 6
1b
10
7a 7b 4
7c
8a
11
8b
8c
Item 4 detail
Replacement Poles Replacement Parts

REF DESCRIPTION NUMBER CODE LBS. REFDESCRIPTION NUMBER CODE LBS.
42" (1050mm) Center Pole BW-6 MXPP-642 90589 177.0 3a UltraShear Blade 6" (150mm) USB6 90410 20.0
48" (1200mm) Center Pole BW-6 MXPP-648 90590 198.0 3b UltraShear Blade 12" (300mm) USB12 90409 40.0
54" (1350mm) Center Pole BW-6 MXPP-654 90591 218.0 4 UltraShear Blade Pin (1 ea.) USBP 90411 1.0
60" (1500mm) Center Pole BW-6 MXPP-660 90592 239.0 5 XDST Mounting Plate Kit* (2 ea.) XDSTMPK 90599 64.0
1a 72" (1800mm) Center Pole BW-6 MXPP-672 90593 280.0 6 XDST Pivot Arm Kit* (1 ea.) XDSTPAK 90600 20.0
84" (2100mm) Center Pole BW-6 MXPP-684 90594 320.0 XDST Tension Spring - Purple (1 ea.)
7a for XDSTS-P 90602 10.0
blades 42" - 60" (1050 - 1500mm)
96" (2400mm) Center Pole BW-6 MXPP-696 90595 361.0
108" (2700mm) Center Pole BW-6 MXPP-6108 90644 402.0 XDST Tension Spring - White (1 ea.)
7b for XDSTS-W 90601 13.0
blades 72" - 108" (1800 - 2700mm)
120" (3000mm) Center Pole BW-6 MXPP-6120 90596 443.0 XDST Tension Spring - Black (1 ea.)
7c for XDSTS-B 90603 17.0
42" (1050mm) Center Pole BW-12 MXPP-1242 90622 178.0 blades 120" (3000mm)
48" (1200mm) Center Pole BW-12 MXPP-1248 90623 198.0 8a XDST Bushing Kit - Purple (2 ea.) XDSTBK-P 90605 0.5
54" (1350mm) Center Pole BW-12 MXPP-1254 90624 219.0 8b XDST Bushing Kit - White (2 ea.) XDSTBK-W 90604 0.5
60" (1500mm) Center Pole BW-12 MXPP-1260 90625 239.0 8c XDST Bushing Kit - Black (2 ea.) XDSTBK-B 90606 0.5
1b 72" (1800mm) Center Pole BW-12 MXPP-1272 90626 280.0 9 MXP Pole Bearing Kit (8 segments)
Replacements for both tensioners
MXPPBK 90607 2.5
10 XDST Pivot Shaft Bracket* (1 ea.) XDSTPSBK 90608 15.0
11 XDST Torque Arm Kit* (1 ea.) XDSTTAK 90609 15.0
12 XDST Jam Nut Kit (2 nuts, 1 washer) XDSTJNK 90610 1.0
13 USB Blade Pin Removal Tool USBBRP 90412 9.0
2 Extreme Duty Pole Ends* (pair) MXPPE 90598 133.0
XDST Spring Tensioner* - Purple
*Hardware Included - (incl. 1 ea. items 5, 9; 2 ea. items 6,7a,8a,10,11,12) XDST-P 90612 206.0
for blades 42" - 60" (1050 - 1500mm)
XDST Spring Tensioner* - White
- (incl. 1 ea. items 5, 9; 2 ea. items 6,7b,8b,10,11,12) XDST-W 90611 212.0
Spring Tensioner Selection Chart for blades 72" - 108" (1800 - 2700mm)
XDST Spring Tensioner* - Black
90612 90611 90613 - (incl. 1 ea. items 5, 9; 2 ea. items 6,7c,8c,10,11,12) XDST-B 90613 220.0
CLEANER BLADE WIDTH XDST-P XDST-W XDST-B for blades 120" (3000mm)
UltraShear 42" - 60" (1050 - 1500mm) X *Hardware Included

UltraShear 72" - 108" (1800 - 2700mm) X
UltraShear 120" (3000mm) X
Product Ordering HV2
Segmented Blade Precleaner
Information
HV2 Precleaners with V-Tips
BELT WIDTH V-TIP ORDERING ITEM WT.
in. mm SIZE NUMBER CODE LBS.
18 450 SS HV2-18SS 79323 99.5
18 450 S HV2-18S 79324 100.9
18 450 M HV2-18M 79325 101.7
24 600 SS HV2-24SS 79326 112.6
24 600 S HV2-24S 79327 114.7
24 600 M HV2-24M 79328 115.9
30 750 SS HV2-30SS 79329 125.6
30 750 S HV2-30S 79330 128.4
HV2 Precleaner
30 750 M HV2-30M 79331 130.0 • 2-7/8" (73mm) diameter pole.
36 900 SS HV2-36SS 79332 138.7
36 900 S HV2-36S 79333 142.2
36 900 M HV2-36M 79334 144.2
36 900 L HV2-36L 79335 145.2
42 1050 SS HV2-42SS 79336 151.8
42 1050 S HV2-42S 79337 156.0
42 1050 M HV2-42M 79338 158.4
42 1050 L HV2-42L 79339 159.6
42 1050 LL HV2-42LL 79340 163.8 Replacement HV2-Tips
48 1200 SS HV2-48SS 79341 164.8 ORDERING ITEM WT.
48 1200 S HV2-48S 79342 169.7 NUMBER CODE LBS.
48 1200 M HV2-48M 79343 172.5 HV2T-S/S 79367 0.6
48 1200 L HV2-48L 79344 173.9 HV2PT 79368 0.8
48 1200 LL HV2-48LL 79345 178.8
54 1350 S HV2-54S 79346 183.5
54 1350 M HV2-54M 79347 186.7
Replacement HV2 Suspension Arms
54 1350 L HV2-54L 79348 188.3
54 1350 LL HV2-54LL 79349 193.9 ORDERING ITEM WT.
SIZE NUMBER CODE LBS.
60 1500 S HV2-60S 79350 197.3
SS H2SA6SS 79369 2.5
60 1500 M HV2-60M 79351 200.9
S H2SA6S 79370 3.2
60 1500 L HV2-60L 79352 202.7
M H2SA6M 79371 3.6
60 1500 LL HV2-60LL 79353 209.0
L H2SA6L 79372 3.8
72 1800 S HV2-72S 79354 216.2
LL H2SA6LL 79373 4.5
72 1800 M HV2-72M 79355 220.2
72 1800 L HV2-72L 79356 222.2
72 1800 LL HV2-72LL 79357 229.2
*NOTE: HV2 Tips must be used only on vulcanized belts. HV2 Suspension Arm Size
HV2 Suspension Arm size is determined by head pulley diameter - see chart.
HEAD PULLEY DIAMETER
Additional sizes available upon request.
+ BELT & LAGGING HV2
in. mm ARM SIZE
10 - 19 250-475 SS
20 - 31 500-775 S
32 - 39 800-975 M
40 - 47 1000-1175 L
48 - 67 1200-1675 LL
Tips Required per Cleaner Size
in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
HV2-Tips
2 3 4 5 6 7 8 9 11
Required

Specifications HV2
& Guidelines

Maximum
Cleaner Size Pole Length Conveyor Span
18 450 66 1650 56 1400
Overall Pole Length
24 600 72 1800 62 1550
30 750 78 1950 68 1700 Maximum Conveyor Span
36 900 84 2100 74 1850
42 1050 90 2250 80 2000
48 1200 96 2400 86 2150
54 1350 102 2550 92 2300
60 1500 108 2700 98 2450
72 1800 120 3000 110 2750
*For special extra long pole length requirements, a Pole Extender Kit
(#76024) is available that provides 30" (750mm) of extended pole length.
Pole Diameter - 2-7/8" (73mm) (page 131)
Clearance Guidelines for Installation

Horizontal Vertical
Suspension Clearance Clearance
Arm Size Required Required
in. mm in. mm
Vertical
SS 8-1/4 210 12-5/8 320
S 8-1/4 210 15-3/8 390
M 8-1/4 210 16-5/8 416
L 8-1/4 210 17-1/2 445
LL 8-1/4 210 20-1/8 511
Horizontal
HV2 Spring Length Chart

(for optimal blade tensioning)
Belt Spring Length
Width Tips SS S M L LL
in mm in mm in mm in mm in mm in mm
18" 450 2 5 1/4" 133 4 7/8" 124 4 3/4" 121 4 1/2" 114 N/A N/A
24" 600 3 4 1/2" 114 4 1/8" 105 5 3/4" 146 5 3/4" 146 N/A N/A
30" 750 4 4 1/2" 114 4 1/8" 105 5 3/4" 146 5 3/4" 146 N/A N/A Top of
36" 900 5 5 3/4" 146 5 5/8" 143 5 1/2" 140 5 3/8" 137 N/A N/A washer
42" 1050 6 5 5/8" 143 5 3/8" 137 5 1/4" 133 5 1/8" 130 4 3/4" 121 to top of
48" 1200 7 5 5/8" 143 5 3/8" 137 5 1/4" 133 5 1/8" 130 4 3/4" 121 torque arm
54" 1350 8 N/A N/A 5 1/8" 130 5 127 4 7/8" 124 6" 152
60" 1500 9 N/A N/A 4 7/8" 124 6 1/8" 156 6" 152 5 7/8" 150
72" 1800 11 N/A N/A 6" 152 6" 152 5 7/8" 150 5 3/4" 146
Purple Spring Silver Spring White Spring
Specifications:
• Maximum Belt Speed............................................1500 FPM (7.5m/s)
• Usable Blade Wear Length..................................3/8" (9mm)
• Blade Material........................................................Long Life Tungsten Carbide
(for vulcanized belts only)
• Available for Belt Widths......................................18" to 72" (450mm to 1800mm)
Other sizes available upon request
Replacement HV2
Parts List
13
7
(hidden)
5
11
8
12
6
1
Replacement Parts 9 9a 9b
ORDERING ITEM WT.
REF DESCRIPTION NUMBER CODE LBS. 14 10
18" (450mm) Pole H2P18 79358 49.8 10a
15
24" (600mm) Pole H2P24 79359 55.0
30" (750mm) Pole H2P30 79360 60.1
36" (900mm) Pole H2P36 79361 65.3
1 42" (1050mm) Pole H2P42 79362 70.5
48" (1200mm) Pole H2P48 79363 75.6
2 2a
54" (1350mm) Pole H2P54 79364 80.8
60" (1500mm) Pole H2P60 79365 86.0
72" (1800mm) Pole H2P72 79366 96.3
2 HV2 Tip (6"/150mm Tip, 1 ea.) HV2T-S/S 79367 0.6
4
HV2 Protected V-Tip* (6"/150mm Tip, 1 ea.)
2a HV2PT 79368 0.8
(for vulcanized belts only) (for abusive wear) HV2 Protected V-Tip
3 HV2-S/S Tip Shield (optional) HV2SSTS 79375 0.5
HV2 SS Suspension Arm* H2SA6SS 79369 2.5
3
HV2 S Suspension Arm* H2SA6S 79370 3.2
4 HV2 M Suspension Arm* H2SA6M 79371 3.6
HV2 L Suspension Arm* H2SA6L 79372 3.8
HV2 LL Suspension Arm* H2SA6LL 79373 4.5
5 HV2 Cushion H2RC 79374 4.3
6 HV2 Polyurethane Cushion Cover UHVC 79453 0.5
HV2 Tips and Arms S/S Tip Shield (Optional)
7 Pole Lock Collar* (1 ea.) MSPPL 75816 1.9
9a Tension Spring - Purple (1 ea.)** QMTS-P 75845 0.6
9b Tension Spring - White (1 ea.)** PSTS-W 75898 1.7
76074 76075 76402
9c Tension Spring - Silver (1 ea.)** PSTS-S 75899 3.0 HV2 Precleaner Size QMT-P QMT-W QMT-S
10a Bushing Kit - Purple (2 ea.) (for Item 9a) QMTBK-P 76097 0.1 18" SS,S,M; 24" S,S; 30" SS,S X
10b Bushing Kit - White (2 ea.) (for Items 9b & 9c) QMTBK-W 76098 0.2 24" M; 30" M; 36" SS-L; 42" SS-L; 48" SS-LL;
X
11 Pivot Shaft Bracket Kit* (1 ea.) QMTPSBK 76099 4.3 54" S-L; 60" S; 72" S
12 Torque Arm Kit* (1 ea.) PSTA 75896 11.4 54" LL; 60" M-LL; 72" M-LL X
14 Offset Bracket Kit* (1 ea.) HOBK 76399 12.4 Tips Required per Cleaner Size
in. 18 24 30 36 42 48 54 60 72
- QMT-P 76074 20.4 mm 450 600 750 900 1050 1200 1350 1500 1800
(incl. 1 ea. Items 9a, 10a, 11, 12, 13)
QMT Spring Tensioner* - White HV2-Tips
- QMT-W 76075 21.8 2 3 4 5 6 7 8 9 11
(incl. 1 ea. Items 9b, 10b, 11, 12, 13) Required
QMT Spring Tensioner* - Silver
- QMT-S 79039 20.3
(incl. 1 ea. Items 9c, 10b, 11, 12, 13)
*Hardware included
Note: All poles and tensioners are heavy-duty style.

Product Ordering H-Type with XF2-Tips
Information
H-Type® with XF2-Tips*
BELT WIDTH XF2-TIP ORDERING ITEM WT.
in. mm SIZE NUMBER CODE LBS.
18 450 SS HXF2-18SS 76138 32.0
18 450 S HXF2-18S 76289 97.1
18 450 M HXF2-18M 76290 97.9
24 600 SS HXF2-24SS 76139 110.0
24 600 S HXF2-24S 76291 111.2
24 600 M HXF2-24M 76292 112.4
H-Type Precleaner with XF2-Tips
30 750 SS HXF2-30SS 76140 113.8 • 2 7/8" (73mm) diameter pole.
30 750 S HXF2-30S 76293 115.0
30 750 M HXF2-30M 76294 116.2
36 900 SS HXF2-36SS 76141 126.2
36 900 S HXF2-36S 76295 127.8
36 900 M HXF2-36M 76296 129.4
36 900 L HXF2-36L 76297 130.6
42 1050 SS HXF2-42SS 76142 138.6
Replacement XF2-Tips
42 1050 S HXF2-42S 76298 140.6 ORDERING ITEM WT.
SIZE NUMBER CODE LBS.
42 1050 M HXF2-42M 76299 142.6
SS HXF2-SS 75979 3.0
42 1050 L HXF2-42L 76300 144.1
S HXF2-S 75980 3.4
48 1200 SS HXF2-48SS 76143 142.4
M HXF2-M 75981 3.8
48 1200 S HXF2-48S 76301 144.4
L HXF2-L 75982 4.1
48 1200 M HXF2-48M 76302 146.4
Specially formulated, long-wearing polyurethane blade tip.
48 1200 L HXF2-48L 76303 147.9 Impact-resistant, reinforced nylon base for rigidity and
54 1350 SS HXF2-54SS 76144 154.8 minimal deflection.
54 1350 S HXF2-54S 76304 157.2
54 1350 M HXF2-54M 76305 161.7
54 1350 L HXF2-54L 76306 163.5
60 1500 S HXF2-60S 76145 196.2
60 1500 M HXF2-60M 76307 199.0 Replacement XF-Tips
60 1500 L HXF2-60L 76308 201.1
ORDERING ITEM WT.
72 1800 S HXF2-72S 76146 216.8 SIZE NUMBER CODE LBS.
72 1800 M HXF2-72M 76309 220.0 SS HXF8SS 74307 3.4
72 1800 L HXF2-72L 76310 222.4 S HXF8S 74689 3.8
*NOTE: XF2-Tips must be used on mechanically spliced belts. Can be used M HXF8M 74690 4.1
on vulcanized belts. L HXF8L 74691 4.5
XF2-Tip size is determined by head pulley diameter - see chart.
To order a cleaner with XF-Tips, call Customer Service.
XF2-Tip & XF-Tip Size

+ BELT & LAGGING XF2-TIP &
Tips Required per Cleaner Size in. mm XF-TIP SIZE
in. 18 24 30 36 42 48 54 60 72 10 - 19 250-475 SS
mm 450 600 750 900 1050 1200 1350 1500 1800 20 - 31 500-775 S
XF2-Tips 32 - 39 800-975 M
2 3 3 4 5 5 6 7 8
Required 40 - 47 1000-1175 L
U.S. Patent No. 6,926,133
Specifications H-Type with XF2-Tips
& Guidelines

MAXIMUM
18 450 66 1650 56 1400
Overall Pole Length
24 600 72 1800 62 1550
36 900 84 2100 74 1850
42 1050 90 2250 80 2000
48 1200 96 2400 86 2150
54 1350 102 2550 92 2300
60 1500 108 2700 98 2450
72 1800 120 3000 110 2750
(page 131).
Clearance Guidelines for Installation

HORIZONTAL VERTICAL
CLEARANCE CLEARANCE
SUSPENSION REQUIRED REQUIRED
ARM SIZE in. mm in. mm
SS 7 175 13 325 Vertical
S 7 175 15 375
M 7 175 16 1/2 413
L 7 175 18 1/2 463
LL 7 175 22 550

with QMT Spring Tensioner
BELT SPRING LENGTH
WIDTH TIPS SS S M L
18" 2 4 1/2" 4" 5 3/4" N/A
24" 3 5 5/8" 5 1/2" 5 3/8" N/A
30" 3 5 5/8" 5 1/2" 5 3/8" N/A
36" 4 5 3/8" 5 1/8" 5" 4 1/4"
42" 5 5" 4 3/4" 6" 6"
48" 5 5" 4 3/4" 6" 6" Top of washer
54" 6 4 3/4" 6" 5 7/8" 5 7/8" to top of
60" 7 N/A 5 7/8" 5 3/4" 5 3/4" torque arm
72" 8 N/A 5 3/4" 5 5/8" 5 5/8"
Purple Spring White Spring Silver Spring
Specifications:
• Maximum Belt Speed......................................................1000 FPM (5m/s)
• Temperature Rating.........................................................-30°F to 180°F (-35°C to 82°C)
• Usable Blade Wear Length............................................3" (75mm)
• Blade Material..................................................................Polyurethane (proprietary blend for
............................................................................................abrasion resistance and long wear)
• Available for Belt Widths................................................18" to 72" (450mm to 1800mm).
............................................................................................Other sizes available upon request
U.S. Patent No. 6.926,133

Product Ordering H-Type with V-Tips
Information
H-Type® with V-Tips*

BELT WIDTH SUSPENSION ORDERING ITEM WT.
in. mm ARM SIZE NUMBER CODE LBS.
18 450 SS HV-18SS 76101 96.3
18 450 S HV-18S 76190 97.1
18 450 M HV-18M 76191 98.1
24 600 SS HV-24SS 76102 108.6
24 600 S HV-24S 76192 109.8
24 600 M HV-24M 76193 111.3
30 750 SS HV-30SS 76103 112.4
30 750 S HV-30S 76194 113.6
30 750 M HV-30M 76195 115.1 H-Type Precleaner with V-Tips
36 900 SS HV-36SS 76104 124.8 • 2 7/8" (73mm) diameter pole.
36 900 S HV-36S 76196 127.8
36 900 M HV-36M 76197 129.8
36 900 L HV-36L 76198 131.4
42 1050 SS HV-42SS 76105 138.6
42 1050 S HV-42S 76199 140.6
42 1050 M HV-42M 76251 143.1
42 1050 L HV-42L 76252 145.1
42 1050 LL HV-42LL 76253 147.6 Replacement V-Tips
48 1200 SS HV-48SS 76106 142.4 ORDERING ITEM WT.
48 1200 S HV-48S 76254 144.4 NUMBER CODE LBS.
48 1200 M HV-48M 76255 146.9 HVT8-S/S 75419 1.0
48 1200 L HV-48L 76256 148.9
48 1200 LL HV-48LL 76257 151.4
54 1350 S HV-54S 76107 157.2
54 1350 M HV-54M 76258 160.2
54 1350 L HV-54L 76259 162.6 Replacement
54 1350 LL HV-54LL 76260 165.6 Suspension Arms
60 1500 S HV-60S 76108 194.1
ORDERING ITEM WT.
60 1500 M HV-60M 76261 197.6 SIZE NUMBER CODE LBS.
60 1500 L HV-60L 76262 200.4 SS HSA8SS 73047 2.0
60 1500 LL HV-60LL 76263 206.0 S HSA8S 73048 2.4
72 1800 S HV-72S 76109 214.7
M HSA8M 73049 2.9
72 1800 M HV-72M 76264 218.7
L HSA8L 73063 3.3
72 1800 L HV-72L 76265 224.0
LL HSA8LL 73064 3.8
72 1800 LL HV-72LL 76266 228.0
*NOTE: V-Tips can be used ONLY on vulcanized belts.
Suspension arm size is determined by head pulley diameter - see chart.
Suspension Arm Size

+ BELT & LAGGING SUSPENSION
in. mm ARM SIZE
Tips Required per Cleaner Size 10 - 19 250-475 SS
in. 18 24 30 36 42 48 54 60 72 20 - 31 500-775 S
mm 450 600 750 900 1050 1200 1350 1500 1800 32 - 39 800-975 M
40 - 47 1000-1175 L
V-Tips
2 3 3 4 5 5 6 7 8 48 - 67 1200-1675 LL
Required
Specifications H-Type with V-Tips
& Guidelines

MAXIMUM
Overall Pole Length
18 450 66 1650 56 1400
30 750 78 1950 68 1700
36 900 84 2100 74 1850
42 1050 90 2250 80 2000
48 1200 96 2400 86 2150
54 1350 102 2550 92 2300
60 1500 108 2700 98 2450
72 1800 120 3000 110 2750
(page 131).
for Installation
HORIZONTAL VERTICAL
ARM SIZE in. mm in. mm
SS 7 175 13 325
S 7 175 15 375
M 7 175 16 1/2 413
L 7 175 18 1/2 463
LL 7 175 22 550 Horizontal
Spring Length Chart

BELT SPRING LENGTH
WIDTH TIPS SS S M L LL
18" 2 5 1/4" 4 7/8" 4 3/4" 4 1/2" N/A
24" 3 4 1/2" 4 1/8" 5 3/4" 5 3/4" N/A
30" 3 4 1/2" 4 1/8" 5 3/4" 5 3/4" N/A Top of washer
36" 4 5 3/4" 5 5/8" 5 1/2" 5 3/8" N/A to top of torque
42" 5 5 5/8" 5 3/8" 5 1/4" 5 1/8" 4 3/4" arm
48" 5 5 5/8" 5 3/8" 5 1/4" 5 1/8" 4 3/4"
54" 6 N/A 5 1/8" 5 4 7/8" 6"
60" 7 N/A 4 7/8" 6 1/8" 6" 5 7/8"
72" 8 N/A 6" 6" 5 7/8" 5 3/4"
Specifications:
• Usable Blade Wear Length............................................3/8" (9mm)
• Blade Material..................................................................Long Life Tungsten Carbide
............................................................................................(for vulcanized belts only)
• Available for Belt Widths................................................18" to 72" (450mm to 1800mm)

Product Ordering H-Type with Protected V-Tips
Information
H-Type® with Protected V-Tips*

For abusive applications where materials being cleaned off
the belt wear the back sides of the cleaner’s V-Tips.
18 450 S HVP-18S 76124 99.1
18 450 M HVP-18M 76267 100.1
18 450 L HVP-18L 76268 100.9
24 600 S HVP-24S 76125 112.8
24 600 M HVP-24M 76269 114.3
24 600 L HVP-24L 76270 115.5
30 750 S HVP-30S 76126 116.6
30 750 M HVP-30M 76271 118.1
H-Type Precleaner with HVP-Tips
• 2 7/8" (73mm) diameter pole.
30 750 L HVP-30L 76272 119.3
36 900 S HVP-36S 76127 130.4
36 900 M HVP-36M 76273 133.8
36 900 L HVP-36L 76274 135.4
42 1050 S HVP-42S 76128 145.6 Replacement
42 1050 M HVP-42M 76275 148.1
42 1050 L HVP-42L 76276 150.1
Protected V-Tips
48 1200 S HVP-48S 76129 149.4 ORDERING ITEM WT.
48 1200 M HVP-48M 76277 151.9 NUMBER CODE LBS.
48 1200 L HVP-48L 76278 153.9 HVPT 73631 2.7
48 1200 LL HVP-48LL 76279 156.4
54 1350 S HVP-54S 76130 163.2
54 1350 M HVP-54M 76280 166.2 Replacement
54 1350 L HVP-54L 76281 168.6
54 1350 LL HVP-54LL 76282 171.6 Suspension Arms
60 1500 S HVP-60S 76131 201.1 ORDERING ITEM WT.
60 1500 M HVP-60M 76283 204.6 SIZE NUMBER CODE LBS.
60 1500 L HVP-60L 76284 207.4 SS HSA8SS 73047 2.0
60 1500 LL HVP-60LL 76285 213.0 S HSA8S 73048 2.4
72 1800 S HVP-72S 76132 222.7 M HSA8M 73049 2.9
72 1800 M HVP-72M 76286 226.7 L HSA8L 73063 3.3
72 1800 L HVP-72L 76287 232.0 LL HSA8LL 73064 3.8
72 1800 LL HVP-72LL 76288 236.0
*NOTE: Protected V-Tips can be used ONLY on vulcanized belts.
Suspension arm size is determined by head pulley
diameter - see chart.
Cleaners come standard with Stainless Steel Tip Shields.
Suspension Arm Size

+ BELT & LAGGING SUSPENSION
in. mm ARM SIZE
Tips Required per Cleaner Size 10 - 19 250-475 SS
in. 18 24 30 36 42 48 54 60 72 20 - 31 500-775 S
mm 450 600 750 900 1050 1200 1350 1500 1800 32 - 39 800-975 M
Protected 40 - 47 1000-1175 L
2 3 3 4 5 5 6 7 8
V-Tips Required 48 - 67 1200-1675 LL
Specifications H-Type with Protected V-Tips
& Guidelines
MAXIMUM
Overall Pole Length
18 450 66 1650 56 1400
24 600 72 1800 62 1550
Maximum Conveyor Span
30 750 78 1950 68 1700
36 900 84 2100 74 1850
42 1050 90 2250 80 2000
48 1200 96 2400 86 2150
54 1350 102 2550 92 2300
60 1500 108 2700 98 2450
72 1800 120 3000 110 2750
(page 131).
Clearance Guidelines For Installation

HORIZONTAL VERTICAL
CLEARANCE CLEARANCE
ARM SIZE in. mm in. mm Vertical
SS 7 175 13 325
S 7 175 15 375
M 7 175 16 1/2 413
L 7 175 18 1/2 463
LL 7 175 22 550

BELT SPRING LENGTH
WIDTH TIPS SS S M L LL
18" 2 5 1/4" 4 7/8" 4 3/4" 4 1/2" N/A
24" 3 4 1/2" 4 1/8" 5 3/4" 5 3/4" N/A
30" 3 4 1/2" 4 1/8" 5 3/4" 5 3/4" N/A
36" 4 5 3/4" 5 5/8" 5 1/2" 5 3/8" N/A Top of washer
42" 5 5 5/8" 5 3/8" 5 1/4" 5 1/8" 4 3/4" to top of
48" 5 5 5/8" 5 3/8" 5 1/4" 5 1/8" 4 3/4" torque arm
54" 6 N/A 5 1/8" 5 4 7/8" 6"
60" 7 N/A 4 7/8" 6 1/8" 6" 5 7/8"
72" 8 N/A 6" 6" 5 7/8" 5 3/4"
Specifications:
• Usable Blade Wear Length............................................3/8" (9mm)
• Blade Material..................................................................Long Life Tungsten Carbide
...........................................................................................(for vulcanized belts only)
• Available for Belt Widths................................................18" to 72" (450mm to 1800mm).

Replacement H-Type
Segmented Blade Precleaners
Parts List
3
11
5
(hidden)
2b
2a
9
10
Replacement Parts 1
HXF2
ORDERING ITEM WT. 7 7a 7b
18" (450mm) Pole H78P18 76110 41.2 12 8
24" (600mm) Pole H78P24 76111 46.5 8a
14
30" (750mm) Pole H78P30 76112 50.3 6
36" (900mm) Pole H78P36 76113 55.7
1 42" (1050mm) Pole H78P42 76114 61.1
48" (1200mm) Pole H78P48 76115 64.9
3a 3b 13
54" (1350mm) Pole H78P54 76116 70.3
60" (1500mm) Pole H78P60 76117 99.8
72" (1800mm) Pole H78P72 76118 113.0
H2 XF-Tip Cushion* 4
2a HXFC2 75902 4.0
(for S, M, L HXF2-Tips; or S - LL Susp. Arms)
H2 F-Tip Cushion* 4
2b HFC2 75901 4.0
(for SS HXF2 Tips; or SS Susp. Arms)
HXF2-Tip Extra Small* HXF2-SS 75979 3.0
HXF2-Tip Small* HXF2-S 75980 3.4
3
HXF2-Tip Medium* HXF2-M 75981 3.8
HXF2-Tip Large* HXF2-L 75982 4.1
3a H V-Tip* (1 ea.) HVT8-S/S 75419 1.0
H Protected V-Tip* (1 ea.)
3b HVPT 73631 2.7
for vulcanized belts only) (for abusive wear)
H SS Suspension Arm* HSA8SS 73047 0.5
4
H S Suspension Arm*
H M Suspension Arm*
HSA8S
HSA8M
73048
73049
1.0
1.5
HV HVP
H L Suspension Arm* HSA8L 73063 2.0
H LL Suspension Arm* HSA8LL 73064 2.5
5 Pole Lock Collar* (1 ea.) MSPPL 75816 1.9
6
7
Pivot Arm Kit* (1 ea.)
Tension Spring - Purple (1 ea.)**
QMTPAK
QMTS-P
76096
75845
4.3
0.6
7a Tension Spring - White (1 ea.)** PSTS-W 75898 1.7 76074 76075 79039
7b Tension Spring - Silver (1 ea.)** PSTS-S 75899 3.0 CLEANER TYPE AND SIZE QMT-P QMT-W QMT-S
8 Bushing Kit - Purple (2 ea.) (for Item 7) QMTBK-P 76097 0.1 HXF2
8a Bushing Kit - White (2 ea.) (for Items 7a & 7b) QMTBK-W 76098 0.2 18" SS & S X
18" M; 24"-36"; 42"-48" SS & S; 54" SS X
10 Torque Arm Kit* (1 ea.) PSTA 75896 11.4
11 Mounting Plate Kit* (2 ea.) MSPMPK 75811 8.3 42"-48" M & L; 54"-72" S, M, L X
12 Offset Bracket Kit* (1 ea.) HOBK 76399 12.4 HV
13 H SS Tip Shield HSSTS 74771 0.5 18" SS, S, M; 24"-30" SS &S X
24"-30" M; 36"-48", 54" S, M, L; 60" S X
- H SS Cushion Shield HSSCS 74772 0.6
54" LL; 60" M, L, LL; 72" X
- QMT-P 76074 20.4
(incl. 1 ea. Items 6, 7, 8, 9, & 10) HVP
QMT Spring Tensioner* - White 18" S, M; 24"-30" S X
- QMT-W 76075 21.8
(incl. 1 ea. Items 6, 7a, 8a, 9, & 10)
QMT Spring Tensioner* - Silver 24"-30" M; 36"-48"; 54" S, M, L; 60" S X
- QMT-S 79039 20.3
(incl. 1 ea. Items 6, 7b, 8a, 9, & 10) 54" LL; 60" M, L, LL; 72" X
*Hardware included
Note: All poles and tensioners are heavy-duty style.
Parts for old style H cleaners - See page <?>.
Product Ordering H-Type with V-Tips
High Temperature Precleaner
Information
High Temp Precleaner with V-Tips

18 450 SS HTV18SS 74821 64.0 Replacement Suspension Arms
18 450 S HTV18S 74828 65.0
24 600 SS HTV24SS 74822 71.6 SUSPENSION ORDERING ITEM WT.
ARM SIZE NUMBER CODE LBS.
24 600 S HTV24S 74829 72.6
SS HSA8SS 73047 0.5
30 750 SS HTV30SS 74823 78.0
S HSA8S 73048 1.0
30 750 S HTV30S 74830 80.0
M HSA8M 73049 1.5
36 900 SS HTV36SS 74824 88.0
36 900 S HTV36S 74831 90.0
36 900 M HTV36M 74838 92.0
42 1050 SS HTV42SS 74825 108.0 Replacement V-Tips
42 1050 S HTV42S 74832 110.0 ORDERING ITEM WT.
42 1050 M HTV42M 74839 112.0 NUMBER CODE LBS.
48 1200 SS HTV48SS 74826 117.0 HVT8-S/S 75419 1.0
48 1200 S HTV48S 74833 120.0
48 1200 M HTV48M 74840 122.0
Suspension arm size is determined by head pulley diameter - see chart.
Pole Diameter - 2-3/8" (60mm) Replacement Spring
ORDERING ITEM WT.
NUMBER CODE LBS.
HTTS-HT 79068 1.0
Suspension Arm Size

HEAD PULLEY DIAMETER +
Tips Required per Cleaner Size BELT & LAGGING
SUSPENSION
in. 18 24 30 36 42 48 in. mm ARM SIZE
mm 450 600 750 900 1050 1200 8 - 15 200 - 375 SS
16 - 27 400 - 675 S
V-Tips Required 2 3 3 4 5 5
28 - 35 700 - 875 M
Product Notes:
• The High Temp Precleaner works in ambient temperatures up to 400°F (204°C) with spikes to 450°F (232°C).
• V-Tips can be used ONLY on vulcanized belts.
• Cleaners come standard with stainless steel tip shields.
• For replacement parts see the old-style H-Type Replacement Parts List (page 129).

Product Ordering EZS2
Standard Duty Secondary Cleaner
Information
EZS2 Secondary
18 450 EZS2-18 75643 71.0
24 600 EZS2-24 75644 75.8
30 750 EZS2-30 75645 79.7
36 900 EZS2-36 75646 85.5
42 1050 EZS2-42 75647 89.4
48 1200 EZS2-48 75648 94.2
54 1350 EZS2-54 75649 99.0
60 1500 EZS2-60 75650 136.3
72 1800 EZS2-72 75651 151.9
Replacement C-Tips
ORDERING ITEM WT.
NUMBER CODE LBS.
ICT6 74535 0.7
Tips Required Per Cleaner Size

in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
C-Tips Required 3 4 5 6 7 8 9 10 12
Product Notes:
• Blade width equals belt width.
• Can be installed in any location from where the belt leaves the pulley on down the beltline.
• FormFlex™ cushions automatically adjust the individual tension of each blade to the belt.
• Works with mechanical splices.
• A special cushion pad helps absorb the impact from mechanical splices and eliminates blade vibration.
• Comes complete with universal mounting brackets.
• Versatile tensioner can be installed to either push-up or pull-up the cleaner to the belt, depending on
installation space constraints.
• If belt is cupped or has low tension, a hold-down roller may be required to flatten
and support the belt for optimal cleaning results.
Product Ordering High Temp EZS2
High Temp Secondary Cleaner
Information
High Temp Secondary Cleaner with C-Tips

18 450 HTS18 76085 64.0
24 600 HTS24 76086 68.0
30 750 HTS30 76087 72.0
36 900 HTS36 76088 76.0
42 1050 HTS42 76089 80.0
48 1200 HTS48 76090 84.0
54 1350 HTS54 76091 88.0
60 1500 HTS60 76092 145.3
72 1800 HTS72 76093 149.5
Replacement C-Tips
ORDERING ITEM WT.
NUMBER CODE LBS.
ICT6 74535 0.7
Replacement Cushion Kit

ORDERING ITEM WT.
NUMBER CODE LBS.
HTSCK 76094 1.5

in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
C-Tips Required 3 4 5 6 7 8 9 10 12
Product Notes:
• The High Temp Secondary works in ambient temperatures up to 400°F (204°C) with
spikes to 450°F (232°C).
• Works with mechanical fasteners.

Specifications EZS2
& Guidelines

MAXIMUM
BELT WIDTH BLADE WIDTH POLE LENGTH CONVEYOR SPAN
18 450 18 450 52 1300 47 1175
24 600 24 600 58 1450 53 1325
30 750 30 750 64 1600 59 1475
36 900 36 900 70 1750 65 1625
42 1050 42 1050 76 1900 71 1775
54 1350 54 1350 88 2200 83 2075 Pole Length
60 1500 60 1500 94 2350 89 2225
72 1800 72 1800 106 2650 101 2525
Pole Diameter - 2-3/8" (60mm) on 18" - 54" (450-1350mm)
Pole Diameter - 2-7/8" (73mm) on 60" - 72" (1500-1800mm)
for Installation
HORIZONTAL VERTICAL
CLEARANCE CLEARANCE
REQUIRED REQUIRED Vertical
in. mm in. mm
8 1/2 for 18"-54" 213
4 100
9 1/2 for 60"-72" 238
Horizontal
Specifications:
• Maximum Belt Speed......................................700 FPM (3.5m/s)
• Temperature Rating (EZS2)............................-30°F to 200°F (-35°C to 93°C)
• Temperature Rating (EZS2 High-Temp)........Up to 400°F (204°C) with spikes to 450°F (232°C)
• Usable Blade Wear Length............................3/8" (9mm)
• Blade Material..................................................Impact Resistant Tungsten Carbide (works with
mechanical fasteners)
• Available for Belt Widths................................18" to 72" (450 to 1800mm)
• CEMA Cleaner Rating......................................Class 3
Replacement EZS2
Parts List
7a
7 2
3a
3
8
7a
7
5
5a
1
6
6a 4
Replacement Parts Mounting Kit Selection Chart

ORDERING ITEM WT. 78919 78920
REF DESCRIPTION NUMBER CODE LBS. Cleaner Width CCMK CCMKHD
18" (450mm) Pole EZS2P18 75652 25.0 EZS2 18" - 54" (450 - 1350mm) X
24" (600mm) Pole EZS2P24 75653 28.0 EZS2 60" - 72" (1500 - 1800mm) X
30" (750mm) Pole EZS2P30 75654 30.0
36" (900mm) Pole EZS2P36 75655 34.0
1 42" (1050mm) Pole EZS2P42 75656 36.0 Cleaner Tips and
48" (1200mm) Pole EZS2P48 75657 39.0
Cushions Required
54" (1350mm) Pole EZS2P54 75658 42.0
60" (1500mm) Pole EZS2P60 75659 77.0
Per Cleaner Size
72" (1800mm) Pole EZS2P72 75660 89.0 Tips
in. mm Required
2 C-Tip Kit* (1 ea.) ICT6 74535 0.7
18 450 3
FormFlex™ Cushion Kit*
3 (incl. 1 cushion & 1 pad)
FFCK 75661 1.5 24 600 4
High Temp Replacement Cushion Kit 30 750 5

3a HTSCK 76094 1.5 36 900 6
(incl. 1 cushion & 1 pad)
4 Adjusting Bracket Kit* (1 ea.) PAB 75513 1.5 42 1050 7
Pole Clamp Kit LEFT* (1 ea.) (incl. item 7) 48 1200 8
5 CCKL 79224 6.8
(for sizes 18"-54" (450-1350mm) 54 1350 9
HD Pole Clamp Kit LEFT* (1 ea.) (incl. item 7a) 60 1500 10
5a CCKHDL 79225 8.7
for sizes 60"-72" (1500-1800mm)
72 1800 12
Pole Clamp Kit RIGHT* (1 ea.) (incl. item 7)
6 CCKR 79228 6.8
for sizes 18"-54" (450-1350mm)
HD Pole Clamp Kit RIGHT* (1 ea.) (incl. item 7a)
6a CCKHDR 79229 8.7
for sizes 60"-72" (1500-1800mm)
Cradle Clamp Top Strap (1 ea.)
7 CCKTS 79232 1.1
for use on L or R Pole Clamp Kit
HD Cradle Clamp Top Strap (1 ea.)
7a CCKHDTS 79233 1.7
for use on L or R HD Pole Clamp Kit
Mounting Bracket Kit
8 EZS2MBK 75666 13.0
(1 Right and 1 Left)
Cradle Clamp Mounting Kit*
– for sizes 18"-54" (450-1350mm) CCMK 78919 33.0
(incl. 2 ea. Items 4 and 1 ea. Items 5, 6 & 8)
HD Cradle Clamp Mounting Kit*
– for sizes 60"-72" (1500-1800mm) CCMKHD 78920 36.7
(incl. 2 ea. Items 4 and 1 ea. Items 5a, 6a & 8)
*Hardware Included

Product Ordering Y-Type™ Standard Duty
Information Secondary Cleaner with Carbide
or Polyurethane Blades and YST Tensioner
Y-Type™ Standard Duty with Carbide Blades

18 450 YT-TC-18S 79759 55.0
24 600 YT-TC-24S 79760 60.0
30 750 YT-TC-30S 79761 65.0
36 900 YT-TC-36S 79762 70.0
42 1050 YT-TC-42S 79763 76.0
48 1200 YT-TC-48S 79764 82.0 Y-Type™ Standard Duty
with Carbide Blades
Y-Type™ Standard Duty with Purple

Polyurethane Blades
18 450 YT-18S 79765 59.0
24 600 YT-24S 79766 65.0
30 750 YT-30S 79767 71.0
36 900 YT-36S 79768 77.0 Y-Type™ Standard Duty with
42 1050 YT-42S 79769 83.0 Purple Polyurethane Blades
48 1200 YT-48S 79770 89.0
Y-Type™ Standard Duty with White

Polyurethane Blades
18 450 YTW-18S 79771 59.0
24 600 YTW-24S 79772 65.0
30 750 YTW-30S 79773 71.0
36 900 YTW-36S 79774 77.0
Y-Type™ Standard Duty with
42 1050 YTW-42S 79775 83.0
White / Food Grade Blades
48 1200 YTW-48S 79776 89.0
Optional YST Drop Brackets (2)

ORDERING ITEM WT. USD
NUMBER CODE LBS. PRICE
YSTDBK 79844 19.7 $ 235.20 YST Standard Duty
Drop Brackets
Product Notes:
• Works on reversing belts, vulcanized belts, and belts with mechanical fasteners.
• Pole Length: Belt width plus 30" (750mm). For longer requirements, see Installation Accessories – Pole Extender Kit (page 131).
• Visual Blade Tension Check: Measure the tension spring and refer to Spring Length Chart on mounting base for the correct
length for best cleaning performance.
• Tensioner: Standard Duty YST Spring Tensioner for self-adjusting tensioning with easy retensioning adjustments. The tensioner
can be mounted in pull-up or push-up position.
• To make cleaner installation easier and quicker, see Optional Mounting Kits on replacement parts page or page 131.
• Simple design makes changing the blades fast and easy. Blades can be removed and replaced individually, or all at once by
replacing the cartridge.
Product Ordering Y-Type™ Standard Duty
Information Secondary Cleaner with Carbide
or Polyurethane Blades and YST Tensioner
Replacement Blades/Cartridges
Standard Duty Carbide
- - YT-C* 79574 1.1
18 450 YCART-18/450-TC 79811 12.6
24 600 YCART-24/600-TC 79812 16.5
Y-Type™ Standard Duty
30 750 YCART-30/750-TC 79813 20.4
Carbide Blade Cartridge
36 900 YCART-36/900-TC 79814 24.2
42 1050 YCART-42/1050-TC 79815 28.1
48 1200 YCART-48/1200-TC 79816 31.9
*Single 3" blade segment
Standard Duty Purple Polyurethane
- - YT-P* 79573 1.2
18 450 YCART-18/450-P 79617 13.1
24 600 YCART-24/600-P 79618 17.1
30 750 YCART-30/750-P 79619 21.1
36 900 YCART-36/900-P 79620 25.1
42 1050 YCART-42/1050-P 79621 29.1
48 1200 YCART-48/1200-P 79622 33.1
Replacement Blades/Cartridges Y-Type™ Standard Duty

Standard Duty White† Polyurethane Polyurethane Blade Cartridge
- - YT-W* 79572 1.2
18 450 YCART-18/450-W 79611 13.1
24 600 YCART-24/600-W 79612 17.1
30 750 YCART-30/750-W 79613 21.1
36 900 YCART-36/900-W 79614 25.1
42 1050 YCART-42/1050-W 79615 29.1
48 1200 YCART-48/1200-W 79616 33.1
†White blades are chemical resistant, and all ingredients used in
Polyurethane formulation comply with the relevant requirements of 21
CFR (FDA Code of Federal Regulations) for use in repeated bulk dry food
applications.

Specifications Y-Type™ Standard Duty
& Guidelines Secondary Cleaner with YST Tensioner

Cleaner Pole
Conveyor Maximum Conveyor Span
Size Length
Span
18 450 48 1200 40 1025
24 600 54 1350 46 1175
30 750 60 1500 52 1325
36 900 66 1650 58 1475
42 1050 72 1800 64 1625
48 1200 78 1950 70 1775
Pole Length - Belt +30" (750mm)
Clearance Guidelines for Installation Y-Type Blade Specifications

Horizontal Vertical Temperature
Belt Width/ Cushion Durometer Range
Cleaner Clearance Clearance
Cleaner Size
Type Required Required Purple -30° to 180°F
86A
in. mm in. mm in. mm Vertical (Standard) -35° to 82° C
Y-Type® White -30° to 180°F
18 - 48 450 - 1200 4-1/4 110 8-1/4 210 83A
Polyurethane (Food Grade)‡ -35° to 82° C
Y-Type -30° to 180°F
18 - 48 450 - 1200 4-1/4 110 7-3/4 184 Carbide 86A
Carbide -35° to 82° C
‡All ingredients used in the Polyurethane formulation of
this blade comply with the relevant requirements of 21 CFR
Horizontal (FDA Code of Federal Regulations) for use in repeated bulk
dry food applications.
Spring Length Chart

Tension
Carbide Jam Nuts
Tension
Polyurethane Tip
Blade Tip Jam Nuts
Width Silver Yellow Purple
Top of Washer
Springs Springs Springs to Top of Flange
in. mm in. mm in. mm in. mm Top of Washer
18 450 4 1/8 105 3 1/4 83 3 5/8 92 to Top of Flange
24 600 4 102 2 7/8 73 3 3/8 86

30 750 3 7/8 98 2 5/8 67 3 1/8 79
36 900 3 3/4 95 2 1/4 57 2 7/8 73
42 1050 3 5/8 92 NA NA 2 5/8 67
48 1200 3 1/2 89 NA NA 2 3/8 60 Pull-Up Tensioner Push-Up Tensioner
Configuration (SD) Configuration (SD)
Shading indicates preferred spring option.
Specifications:
• Maximum Belt Speed........................ 600 FPM (3m/s)
• Temperature Rating........................... -30°F to 180°F (-35°C to 82°C)
• Usable Blade Wear Length.............. 2" (50mm) (Polyurethane)
1/4" (6mm) (Carbide)
• Blade Materials.................................. Purple: Polyurethane (proprietary blend for abrasion resistance and long wear)
White: Polyurethane (chemical resistant/food grade)
Carbide: Tungsten Carbide
• Available for Belt Widths.................. 18" to 48" (450 to 1200mm). Other sizes available upon request.
• CEMA Cleaner Rating........................ Class 2 (Standard-duty with polyurethane blades)
Class 3 (Standard-duty with carbide blades)
Replacement Y-Type™ Standard Duty
Parts List Secondary Cleaner with YST Tensioner
9b 11
9a
5c
5b
5a
8
6 7
10 1
15 17 14 16 3
13 12
2
Replacement Parts Replacement Blades/Blade Cartridges

18" (450mm) Y-Type™ Pole YTP-18/450 79587 20.2 12 Y-Type Carbide Blade (single) YT-C 79574 1.1
24" (600mm) Y-Type Pole YTP-24/600 79588 22.7 18" (450mm) Y-Type Carbide Blade Cartridge YCART-18/450-TC 79811 12.6
1
13
18" (450mm) Y-Type Cushion Angle YTA-18/450 79593 5.7 48" (1200mm) Y-Type Carbide Blade Cartridge YCART-48/1200-TC 79816 31.9
14 Y-Type Purple Polyurethane Blade (single) YT-P 79573 1.2
24" (600mm) Y-Type Cushion Angle YTA-24/600 79594 7.3
18" (450mm) Y-Type Purple Blade Cartridge YCART-18/450-P 79617 13.1
2 24" (600mm) Y-Type Purple Blade Cartridge YCART-24/600-P 79618 17.1
42" (1050mm) Y-Type Cushion Angle YTA-42/1050 79597 12 15
3 Y-Type Angle Clamp* (2 Clamps) YTAC 79623 2.2
4 YST Drop Bracket Kit (2 Brackets) YSTDBK 79844 19.7
16 Y-Type White Polyurethane Blade (single) YT-W 79572 1.2
5a YST Spring Yellow YSTS-Y 79795 0.3
18" (450mm) Y-Type White Blade Cartridge YCART-18/450-W 79611 13.1
5b YST Spring Purple YSTS-P 79796 0.4
5c YST Spring Silver (Y-Type Carbide Cleaners) CTS-S 77743 0.5
6 YST Mounting Bracket (incl. Angle Bracket) YSTMB 79843 3.3 17
7 YST Guide Block Kit (Pair) YSTGBK 79845 0.4
8 YST Lower Bushing Kit (Pair) YSTLBK 79846 0.1
9a YST Top Bushing Kit White (Pair) YSTTBK-W 79847 0.1
9b YST Top Bushing Kit Black (Pair) YSTTBK-B 79855 0.1
10 YST Pole Mount Kit* YSTPMK 79848 4.3
11 YST Adjusting Rod Nut Kit YSTANK 79857 0.2 Blades Required per Cleaner Size
YST Tensioner w/Yellow Spring (Pair) in. 18 24 30 36 42 48
- YST-Y 79836 18.2
(incl. 2 ea. item 5a, 6, 10, 11; 1 ea. items 7, 8, 9a)
mm 450 600 750 900 1050 1200
YST Tensioner w/Purple Spring (Pair)
- YST-P 79837 18.5 Blades Required 6 8 10 12 14 16
(incl. 2 ea. item 5b, 6, 10, 11; 1 ea. items 7, 8, 9a)
YST Tensioner w/Silver Spring (Pair)
-
(incl. 2 ea. item 5c, 6, 10, 11; 1 ea. items 7, 8, 9b)
YST-S 79838 18.8 Spring Tensioner Selection Chart
*Hardware included 79838 79836 79837
Cleaner Blade Width
YST-S YST-Y YST-P
Carbide 18" - 48" (450 - 1200mm) X
Polyurethane 18" - 30" (450 - 750mm) X
Polyurethane 36" - 48" (900 - 1200mm) X

Product Ordering Y-Type™ Heavy Duty
Information Secondary Cleaner with HD Carbide
or Urethane Blades and YST Tensioner
Y-Type™ HD with Carbide Blades

36 900 YTHD-TC-36S 79777 130.0
42 1050 YTHD-TC-42S 79778 142.4
48 1200 YTHD-TC-48S 79779 151.9
54 1350 YTHD-TC-54S 79780 161.5
60 1500 YTHD-TC-60S 79781 171.0 Y-Type™ HD with
72 1800 YTHD-TC-72S 79782 190.1 Carbide Blades
Y-Type™ HD with Purple Polyurethane Blades

36 900 YTHD-36S 79783 131.0
42 1050 YTHD-42S 79784 140.3
48 1200 YTHD-48S 79785 149.5
54 1350 YTHD-54S 79786 158.8
60 1500 YTHD-60S 79787 168.0
72 1800 YTHD-72S 79788 186.5 Y-Type™ HD with Purple
Polyurethane Blades
Y-Type™ HD with White Polyurethane Blades

36 900 YTHDW-36S 79789 131.0
42 1050 YTHDW-42S 79790 140.3
48 1200 YTHDW-48S 79791 149.5
54 1350 YTHDW-54S 79792 158.8
60 1500 YTHDW-60S 79793 168.0
72 1800 YTHDW-72S 79794 186.5 Y-Type™ HD with
White/ Food Grade Blades
Optional YST Drop Brackets (2)

ORDERING ITEM WT.
NUMBER CODE LBS.
YSTHDDBK 79850 32.1 YST Heavy Duty
Drop Brackets
Product Notes:
• Works on reversing belts, vulcanized belts, and belts with mechanical fasteners.
• Pole Length: Belt width plus 54" (1350mm). For longer requirements, see Installation Accessories – Pole Extender Kit (page 131).
• Tensioner: Standard Duty YST Spring Tensioner for self-adjusting tensioning with easy retensioning adjustments. The tensioner
can be mounted in pull-up or push-up position.
• To make cleaner installation easier and quicker, see Optional Mounting Kits on replacement parts page or page 131.
• Simple design makes changing the blades fast and easy. Blades can be removed and replaced individually, or all at once by
replacing the cartridge.
Product Ordering Y-Type™ Heavy Duty
Information Secondary Cleaner with HD Carbide
or Urethane Blades and YST Tensioner
Replacement Blades/Cartridges - HD Carbide

- - YT-HDC* 79728 1.8
36 900 YCART-36/900-HDTC 79829 38.4
42 1050 YCART-42/1050-HDTC 79830 44.5
48 1200 YCART-48/1200-HDTC 79831 50.6
54 1350 YCART-54/1350-HDTC 79832 56.8 Y-Type™ HD Carbide Blade Cartridge
60 1500 YCART-60/1500-HDTC 79833 62.9
72 1800 YCART-72/1800-HDTC 79834 75.2
HD Purple Polyurethane
- - YT-HDP* 79677 1.7
36 900 YCART-36/900-HDP 79817 36.5
42 1050 YCART-42/1050-HDP 79818 42.3
48 1200 YCART-48/1200-HDP 79819 48.1
54 1350 YCART-54/1350-HDP 79820 53.9
60 1500 YCART-60/1500-HDP 79821 59.8
72 1800 YCART-72/1800-HDP 79822 71.4
HD White† Polyurethane Y-Type™ HD Polyurethane Blade Cartridge
- - YT-HDW* 79676 1.7
36 900 YCART-36/900-HDW 79823 36.5
42 1050 YCART-42/1050-HDW 79824 42.3
48 1200 YCART-48/1200-HDW 79825 48.1
54 1350 YCART-54/1350-HDW 79826 53.9
60 1500 YCART-60/1500-HDW 79827 59.8
72 1800 YCART-72/1800-HDW 79828 71.4
†White blades are chemical resistant, and all ingredients used in Polyurethane formulation
comply with the relevant requirements of 21 CFR (FDA Code of Federal Regulations) for use
in repeated bulk dry food applications.

Specifications Y-Type™ Heavy Duty
& Guidelines Secondary Cleaner with YST Tensioner

Cleaner Pole
Conveyor Maximum Conveyor Span
Size Length
Span
36 900 90 2286 82 2083
42 1050 96 2438 88 2235
48 1200 102 2590 94 2388
54 1350 108 2743 100 2540
60 1500 114 2895 106 2692
72 1800 126 3200 118 2997
Pole Length - Belt +54" (1350mm)
Clearance Guidelines for Installation Y-Type Blade Specifications

Horizontal Vertical Temperature
Belt Width/ Cushion Durometer Range
Cleaner Clearance Clearance
Cleaner Size
Type Required Required Purple -30° to 180°F
Vertical 86A
in. mm in. mm in. mm (Standard) -35° to 82° C
Y-Type® HD White -30° to 180°F

36 - 72 900 - 1800 5-1/4 133 9-1/2 241 83A
Polyurethane (Food Grade) ‡ -35° to 82° C
Y-Type HD -30° to 180°F

36 - 72 900 - 1800 5-1/4 133 9-3/4 248 Carbide 86
Carbide -35° to 82° C
‡ All ingredients used in the Polyurethane formulation
of this blade comply with the relevant requirements of
Horizontal 21 CFR (FDA Code of Federal Regulations) for use in
Spring Length Chart

Tension
Carbide Tip Polyurethane Tip Jam Nuts
Blade Tension
Silver Black Green Blue Jam Nuts
Width
Springs Springs Springs Springs
Top of Washer
in. mm in. mm in. mm in. mm in. mm to Top of Flange
36 900 3 7/8 98 4 102 3 76 3 3/8 86 Top of Washer
to Top of Flange
42 1050 3 3/4 95 3 7/8 98 2 7/8 73 3 1/4 83
48 1200 3 5/8 92 3 3/4 95 2 5/8 67 3 1/8 79
54 1350 3 1/2 89 3 3/4 95 2 1/2 64 3 76
60 1500 3 3/8 86 3 5/8 92 NA NA 2 7/8 73
72 1800 3 1/4 83 3 1/2 89 NA NA 2 1/2 64
Shading indicates preferred spring option. Pull-Up Tensioner Push-Up Tensioner
Configuration (HD) Configuration (HD)
Specifications:
• Maximum Belt Speed........................ 750 FPM (3.8m/s)
• Temperature Rating........................... -30°F to 180°F (-35°C to 82°C)
• Usable Blade Wear Length.............. 3" (76mm) (Polyurethane)
3/8" (10mm) (Carbide)
• Blade Materials.................................. Purple: Polyurethane (proprietary blend for abrasion resistance and long wear)
White: Polyurethane (chemical resistant/food grade)
Carbide: Tungsten Carbide
• Available for Belt Widths.................. 36" to 72" (900 to 1800mm). Other sizes available upon request
• CEMA Cleaner Rating........................ Class 3 (Heavy-duty with polyurethane or carbide blades)
Replacement Y-Type™ Heavy Duty
Parts List Secondary Cleaner with YST Tensioner
7
9b 11
4 9a
5d
5c 2
5b
5a
8
6
1
10
3
15 17 13
12
14 16
Replacement Parts Replacement Blades/Blade Cartridges

36" (900mm) Y-Type HD Pole YTPHD-36/900 79799 60.0 12 Y-Type HD Carbide Blade (single) YT-HDC 79728 1.9
42" (1050mm) Y-Type HD Pole YTPHD-42/1050 79800 63.4 36" (900mm) Y-Type HD Carbide Blade Cartridge YCART-36/900-HDTC 79829 38.5
1
13
36" (900mm) Y-Type HD Cushion Angle YTAHD-36/900 79805 16.5 72" (1800mm) Y-Type HD Carbide Blade Cartridge YCART-72/1800-HDTC 79834 75.2
42" (1050mm) Y-Type HD Cushion Angle YTAHD-42/1050 79806 18.9 14 Y-Type HD Purple Polyurethane Blade (single) YT-HDP 79677 1.7
48" (1200mm) Y-Type HD Cushion Angle YTAHD-48/1200 79807 21.4 36" (900mm) Y-Type HD Purple Blade Cartridge YCART-36/900-HDP 79817 36.6
2
15
3 Y-Type HD Angle Clamp* (2 Clamps) YTACHD 79835 4.8 60" (1500mm) Y-Type HD Purple Blade Cartridge YCART-60/1500-HDP 79821 59.8
4 YST HD Drop Bracket Kit (2 Brackets) YSTHDDBK 79850 32.1 72" (1800mm) Y-Type HD Purple Blade Cartridge YCART-72/1800-HDP 79822 71.4
5a YST HD Spring, Green YSTHDS-GR 79797 0.5 16 Y-Type HD White Polyurethane Blade (single) YT-HDW 79676 1.7
5b SST Spring, Silver STS-S 75843 0.8 36" (900mm) Y-Type HD White Blade Cartridge YCART-36/900-HDW 79823 36.6
5c YST HD Spring, Blue (for Y-Type HD Carbide Cleaners) YSTHDS-BL 79798 0.6 42" (1050mm) Y-Type HD White Blade Cartridge YCART-42/1050-HDW 79824 42.4
5d SST Spring, Black (for Y-Type HD Carbide Cleaners) STS-B 75844 1.1 48" (1200mm) Y-Type HD White Blade Cartridge YCART-48/1200-HDW 79825 48.2
17
6 YST HD Mounting Bracket (incl. Angle Bracket) YSTHDMB 79849 6.7 54" (1350mm) Y-Type HD White Blade Cartridge YCART-54/1350-HDW 79826 54.0
7 YST HD Guide Block Kit (Pair) YSTHDGBK 79851 1.0 60" (1500mm) Y-Type HD White Blade Cartridge YCART-60/1500-HDW 79827 59.8
8 YST HD Lower Bushing Kit (Pair) YSTHDLBK 79852 0.1 72" (1800mm) Y-Type HD White Blade Cartridge YCART-72/1800-HDW 79828 71.4
9a YST HD Top Bushing Kit White (Pair) YSTHDBK-W 79853 0.1
9b YST HD Top Bushing Kit Black (Pair) YSTHDBK-B 79856 0.1
10 YST HD Pole Mount Kit* YSTPHDMK 79854 7.8
Silver Black Green Blue
11 YST HD Adjusting Rod Nut Kit YSTANKHD 79858 0.6 Cleaner Blade Width
YSTHD-S YSTHD-BK YSTHD-GR YSTHD-BL
YST Tensioner w/Silver Spring (Pair) Carbide 36" - 54" (900 - 1350mm) X
- (for belts 36" - 54" w/carbide tips) (incl. 2 ea. item 5b, YSTHD-S 79840 33.4
6, 10, 11; 1 ea. items 7, 8, 9a) Carbide 60" - 72" (1500 - 1800mm) X
YST Tensioner w/Black Spring (Pair) Polyurethane 36" - 48" (900 - 1200mm) X
- (for belts 60" - 72" w/carbide tips) (incl. 2 ea. item 5d, YSTHD-BK 79842 34.1 Polyurethane 54" - 72" (1350 - 1800mm) X
6, 10, 11; 1 ea. items 7, 8, 9b)
-
YST Tensioner w/Green Spring (Pair)
(for belts 36" - 48" w/Polyurethane tips) (incl. 2 ea. YSTHD-GR 79839 32.8 Blades Required per Cleaner Size
item 5a, 6, 10, 11; 1 ea. items 7, 8, 9a) in. 36 42 48 54 60 72
YST Tensioner w/Blue Spring (Pair) mm 900 1050 1200 1350 1500 1800
- (for belts 54" - 72" w/Polyurethane tips) (incl. 2 ea. YSTHD-BL 79841 33.1
item 5c, 6, 10, 11; 1 ea. items 7, 8, 9b) Blades Required 12 14 16 18 20 24
*Hardware included

Product Ordering P-Type®
Secondary Cleaner
Information
P-Type® Secondary with C-Tips*
18 450 PC18 74566 72.4
24 600 PC24 74567 79.3
30 750 PC30 74568 85.2
36 900 PC36 74569 92.1
42 1050 PC42 74570 105.0
48 1200 PC48 74571 111.8
54 1350 PC54 74572 122.2
60 1500 PC60 74573 128.1
72 1800 PC72 74574 139.9
*NOTE: C-Tips can be used on mechanically spliced and
vulcanized belts.
P-Type® Secondary with V-Tips*

18 450 PV-18 78453 72.4
24 600 PV-24 78415 79.3
30 750 PV-30 78417 85.2
36 900 PV-36 78419 92.1
42 1050 PV-42 78421 105.0
48 1200 PV-48 78423 111.8
54 1350 PV-54 78454 122.2
60 1500 PV-60 78455 128.1
72 1800 PV72 73438 139.9
Replacement Tips Tips Required per Cleaner Size

ORDERING ITEM WT. in. 18 24 30 36 42 48 54 60 72
NUMBER CODE LBS. mm 450 600 750 900 1050 1200 1350 1500 1800
ICT6 74535 0.7 C-Tips
or V-Tips 3 4 5 6 7 8 9 10 12
PSA150 73156 1.0
Required
Product Notes:
• C-Tip: specially formulated tungsten carbide blades to work with mechanical fasteners.
• V-Tip: for use on vulcanized belts only.
• Compact design: fits in small transfer areas and tight chutes.
• Tips set at a non-aggressive 70º angle to give quick relief for passing mechanical splices.
Product Ordering P-Type® LS
Limited Space Secondary Cleaner
Information
P-Type® LS Belt Cleaner with C-Tips*

18 450 PLSC18 75588 73.4
24 600 PLSC24 75589 80.3
30 750 PLSC30 75590 86.2
36 900 PLSC36 75591 93.1
42 1050 PLSC42 75592 100.0
48 1200 PLSC48 75593 106.9
54 1350 PLSC54 75594 113.8
*NOTE: C-Tips can be used on mechanically spliced and vulcanized belts.
Replacement C-Tips
ORDERING ITEM WT.
NUMBER CODE LBS.
ICT6 74535 0.7

in. 18 24 30 36 42 48 54
mm 450 600 750 900 1050 1200 1350
C-Tips
3 4 5 6 7 8 9
Required
Product Notes:
• LS = Limited Space. Requires only 5 1/2" (138mm) of vertical clearance for installation.
• Not available in belt widths larger than 54" (1350mm).

Specifications P-Type®
Secondary Cleaner
& Guidelines
MAXIMUM
in. mm in. mm in. mm Overall Pole Length
24 600 54 1350 49 1225
30 750 60 1500 55 1375
36 900 66 1650 61 1525
42 1050 72 1800 67 1675
48 1200 78 1950 73 1825
54 1350 88 2200 83 2075
60 1500 94 2350 89 2225
72 1800 106 2650 101 2525
Horizontal
Clearance Guidelines for Installation Horizontal

HORIZONTAL VERTICAL
BELT WIDTH/ CLEARANCE CLEARANCE
CLEANER CLEANER SIZE REQUIRED REQUIRED
TYPE in. mm in. mm in. mm Vertical
P-Type 18 - 72 450 - 1800 4 100 8 200 Vertical
P-Type LS 18 - 54 450 - 1350 5 125 5 1/2 138
P-Type P-Type LS
P-Type Cushion Specifications

TEMPERATURE
CUSHION DUROMETER RANGE
-30° to 180°F
Standard 55A
-35° to 82° C
Specifications:
• Maximum Belt Speed......................................1000 FPM (5m/s)
• Temperature Rating.........................................-30°F to 180°F (-35°C to 82°C)
• Blade Materials................................................C-Tip: Impact Resistant Tungsten Carbide
(works with mechanical fasteners)
V-Tip: Long Life Tungsten Carbide (works on vulcanized
belts only)
• Available for Belt Widths................................P-Type: 18" to 72" (450 to 1800mm)
P-Type LS: 18" to 54" (450 to 1350mm)
Other sizes available upon request.
Replacement P-Type®
Secondary Cleaner
Parts List
4 9
10
2
9
8
1
1a
7
Replacement Parts
6 ORDERING ITEM WT.
18" (450mm) Pole PP-18 78414 22.5
5 24" (600mm) Pole PP-24 78416 26.0
30" (750mm) Pole PP-30 78418 32.3
36" (900mm) Pole PP-36 78420 33.0
1 42" (1050mm) Pole PP-42 78422 43.0
48" (1200mm) Pole PP-48 78424 47.5
P V-Tip 54" (1350mm) Pole PP-54 78425 55.0
60" (1500mm) Pole PP-60 78451 58.0
72" (1800mm) Pole PP72 73017 64.0
18" (450mm) LS Pole PLSP18 75595 32.3
24" (600mm) LS Pole PLSP24 75596 36.0
30" (750mm) LS Pole PLSP30 75597 38.7
1a 36" (900mm) LS Pole PLSP36 75598 42.4
42" (1050mm) LS Pole PLSP42 75599 46.1
3 3a 48" (1200mm) LS Pole PLSP48 75600 49.8
54" (1350mm) LS Pole PLSP54 75601 53.5
2 P2 C-Tip Cushion* PHA 73626 2.0
3 P Polyshield PPS6 73024 0.5
3a P SS Shield PSSS 74773 0.5
4 C-Tip* Kit (1 ea.) ICT6 74535 0.7
5 P V-Tip* (for vulcanized belts only) PSA150 73156 1.0
6 Adjusting Bracket Kit* (1 ea.) PAB 75513 1.5
Tips Required per Cleaner Size 7 Pole Clamp Kit Left* (1 ea.) (incl. item 9) CCKL 79224 6.8
in. 18 24 30 36 42 48 54 60 72 8 Pole Clamp Kit Right* (1 ea.) (incl. item 9) CCKR 79228 6.8
mm 450 600 750 900 1050 1200 1350 1500 1800 Cradle Clamp Top Strap (1 ea.)
9 CCKTS 79232 1.1
For use on left or right Pole Clamp Kit
C-Tips or V-Tips
3 4 5 6 7 8 9 10 12 Mounting Bracket Kit
Required 10 EZS2MBK 75666 13.0
- CCMK 78919 33.0
(incl. 2 items 6 and 1 ea. item 7, 8 & 10)
*Hardware included

Product Ordering R-Type®
Reversing Secondary Cleaner
Information
R-Type® Reversing with C-Tips*
18 450 RC18 74618 72.8
24 600 RC24 74619 79.3
30 750 RC30 74620 85.2
36 900 RC36 74621 91.9
42 1050 RC42 74622 104.9
48 1200 RC48 74623 113.5
54 1350 RC54 74624 121.1
60 1500 RC60 74625 129.8
72 1800 RC72 74626 141.1
*NOTE: C-Tips can be used on mechanically spliced and
vulcanized belts.
R-Type® Reversing with V-Tips*

18 450 RV-18 78402 72.4
24 600 RV-24 78403 78.7
30 750 RV-30 78404 84.6
36 900 RV-36 78405 91.1
42 1050 RV-42 78406 104.0
48 1200 RV-48 78407 113.3
54 1350 RV-54 78408 119.9
60 1500 RV-60 78409 128.5
72 1800 RV-72 74641 139.7
Replacement Tips
ORDERING ITEM WT.
NUMBER CODE LBS.
ICT6 74535 0.7
RSA150 73628 1.3

in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
C-Tips or V-Tips 3 4 5 6 7 8 9 10 12
Required
Product Notes:
• Two-way cushions allow cleaning in both directions.
• Tungsten carbide tips for long wear and superior cleaning.
Specifications R-Type®
Reversing Secondary Cleaner
& Guidelines

MAXIMUM Overall Pole Length
in. mm in. mm in. mm Maximum Conveyor Span
18 450 48 1200 43 1075
24 600 54 1350 49 1225
30 750 60 1500 55 1375
36 900 66 1650 61 1525
42 1050 72 1800 67 1675
48 1200 78 1950 73 1825
54 1350 88 2200 83 2075
60 1500 94 2350 89 2225
72 1800 106 2650 101 2525
Clearance Guidelines For Installation

HORIZONTAL VERTICAL
BELT WIDTH/ CLEARANCE CLEARANCE Vertical
CLEANER SIZE REQUIRED REQUIRED
18 - 72 450 - 1800 4 100 8 200
Horizontal
R-Type Cushion Specifications

TEMPERATURE
CUSHION DUROMETER RANGE
-30° to 180°F
Standard 55A
-35° to 82° C
Specifications:
• Maximum Belt Speed......................................1000 FPM (5m/s)
• Blade Materials................................................C-Tip: Impact Resistant Tungsten Carbide (works with mechanical fasteners)
V-Tip: Long Life Tungsten Carbide (works on vulcanized belts only)
• Available for Belt Widths................................18" to 72" (450 to 1800mm)
Other sizes available upon request

Replacement R-Type®
Secondary Cleaner
Parts List
8 3
6
8
1
7
4
5
R V-Tip
Replacement Parts
ORDERING ITEM WT.
18" (450mm) Pole RP-18 78426 23.9
24" (600mm) Pole RP-24 78427 27.8
30" (750mm) Pole RP-30 78428 31.1
36" (900mm) Pole RP-36 78429 35.2
1 42" (1050mm) Pole RP-42 78430 45.6
48" (1200mm) Pole RP-48 78431 50.6
54" (1350mm) Pole RP-54 78432 56.6
60" (1500mm) Pole RP-60 78433 62.7
72" (1800mm) Pole RP-72 74612 71.4
2 R2 C-Tip Cushion* RSA 76249 2.0
3 C-Tip Kit* (1 ea.) ICT6 74535 0.7
4 R V-Tip* (for vulcanized belts only) RSA150 73628 1.3
5 Adjusting Bracket Kit* (1 ea.) PAB 75513 1.5
Pole Clamp Kit Left* (1 ea.)
6
(incl. 1 item 8) CCKL 79224 6.8
Pole Clamp Kit Right* (1 ea.)
7
(incl. 1 item 8) CCKR 79228 6.8
Pole Clamp Top Strap (1 ea.)
8
For use on left or right Pole Clamp Kit CCKTS 79232 1.1 Tips Required per Cleaner Size
Mounting Bracket Kit in. 18 24 30 36 42 48 54 60 72
9 (1 Right and 1 Left) EZS2MBK 75666 13.0 mm 450 600 750 900 1050 1200 1350 1500 1800
Cradle Clamp Mounting Kit* C-Tips or V-Tips
- 3 4 5 6 7 8 9 10 12
(incl. 2 ea. item 5 and 1 ea. item 6, 7 & 9) CCMK 78919 33.0 Required
*Hardware included
Product Ordering FMS
Medium-Duty Secondary Cleaner
Information (MST Tensioners)
FMS Medium-Duty Secondary with C-Tips

18 450 FMS-18-YST 90545 98.7
24 600 FMS-24-YST 90546 111.2
30 750 FMS-30-YST 90547 123.6
36 900 FMS-36-YST 90548 136.1
42 1050 FMS-42-YST 90549 148.6
48 1200 FMS-48-YST 90550 161.1
54 1350 FMS-54-YST 90551 173.5
60 1500 FMS-60-YST 90552 186.0
72 1800 FMS-72-YST 90553 211.0
FMS Medium-Duty Secondary with V-Tips

18 450 FMS-18V 79646 98.7
24 600 FMS-24V 79647 111.2
30 750 FMS-30V 79648 123.6
36 900 FMS-36V 79649 136.1
42 1050 FMS-42V 79650 148.6
48 1200 FMS-48V 79651 161.1
54 1350 FMS-54V 79652 173.5
60 1500 FMS-60V 79653 186.0
72 1800 FMS-72V 79654 211.0
Replacement Tips Optional MST Drop Brackets (2)

ICT6 74535 0.7 MSTDB 79434 27.7
RSA150 73628 1.3

in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
C-Tips or V-Tips
3 4 5 6 7 8 9 10 12
Required
Product Notes:
• Recommended for medium-duty conveyor applications.
• Pole Length: Belt width plus 54" (1350mm). For longer requirements, see Mineline Installation Accessories - Pole
Extender Kit (page 131).
• Cushion is designed to maintain continuous blade-to-belt contact and quick relief from passing mechanical splices.
• C-Tips are for mechanically fastened or vulcanized belts. V-Tips are for vulcanized belts only.
• Visual Blade Tension Check: Measure the tension spring and refer to Spring Length Chart for the correct length for
best cleaning performance.
• Tensioner: MST Spring Tensioner for self-adjusting tensioning with easy retensioning adjustments.
• To make cleaner installation easier and quicker, see Optional Drop Brackets on page 95.
U.S. Patent No. 6,823,983; 7,093,706

Specifications FMS
& Guidelines

MAXIMUM Overall Pole Length
CLEANER SIZE BLADE WIDTH POLE LENGTH
CONVEYOR SPAN Maximum Conveyor Span
18 450 18 450 72 1800 62 1550
24 600 24 600 78 1950 68 1700
30 750 30 750 84 2100 74 1850
36 900 36 900 90 2250 80 2000
42 1050 42 1050 96 2400 86 2150
48 1200 48 1200 102 2550 92 2300
54 1350 54 1350 108 2700 98 2450
60 1500 60 1500 114 2850 104 2600
72 1800 72 1800 126 3150 116 2900
available that provides 30" (750mm) of extended pole length. (page 131).

Installation
HORIZONTAL VERTICAL
REQUIRED REQUIRED
in. mm in. mm
3-1/2 89 10 245
Horizontal
MST Tensioner Spring Length Chart

Blade 2 White 2 Silver 2 Black
Width Springs Springs Springs
18 450 2 7/8 73 3 1/2 89 3 1/2 89
24 600 2 5/8 67 3 3/8 86 3 1/2 89 Bottom of Pole
30 750 2 3/8 60 3 1/4 83 3 3/8 86 Mount to Bottom
36 900 2 1/8 54 3 1/8 79 3 1/4 83 of Spring Support
42 1050 N/A N/A 3 76 3 1/8 79 Plate
48 1200 N/A N/A 2 7/8 73 3 1/8 79
54 1350 N/A N/A 2 3/4 70 3 76
60 1500 N/A N/A 2 3/4 70 2 7/8 73
72 1800 N/A N/A N/A N/A 2 3/4 70
Shading indicates preferred spring option. Measure
spring as shown.
Specifications
• Maximum Belt Speed.......................................................1000 FPM (5m/s)
• Temperature Rating..........................................................-30°F to 180°F (-35°C to 82°C)
• Usable Blade Wear Length..............................................3/8" (9mm)
• Blade Materials.................................................................C-Tip: Impact Resistant Tungsten Carbide (works with mechanical fasteners)
V-Tip: Long Life Tungsten Carbide (for vulcanized belts only)
• Available for Belt Widths.................................................18" to 72" (450 to 1800mm). Other sizes available upon request
• CEMA Cleaner Rating.......................................................Class 4
U.S. Patent No. 6,823,983; 7,093,706
Replacement FMS
Parts List
3 2b
2a
13
13
1
9
Stainless Steel Shields 8
10
11
6 7
4a
4b
4c
12 5
Replacement Parts
ORDERING ITEM WT.
18" (450mm) Pole MHSP-18 76178 46.2
24" (600mm) Pole MHSP-24 75918 51.7
30" (750mm) Pole MHSP-30 75919 57.2
36" (900mm) Pole MHSP-36 75920 62.8
1 42" (1050mm) Pole MHSP-42 75921 68.3
48" (1200mm) Pole MHSP-48 75922 73.9
54" (1350mm) Pole MHSP-54 75923 79.4
60" (1500mm) Pole MHSP-60 75924 85.0
72" (1800mm) Pole MHSP-72 75925 96.1
2a C-Tip* ICT6 74535 0.7
2b V-Tip* (for vulcanized belts only) RSA150 73628 1.3
3 FMS Cushion Kit* FMSC 79699 4.2
4a Tension Spring - White (1 ea.) for belts 18" - 30" (450-750mm) STS-W 75846 0.5
4b Tension Spring - Silver (1 ea.) for belts 36" - 54" (900-1350mm) STS-S 75843 0.8
4c Tension Spring - Black (1 ea.) for belts 60" - 72" (1500-1800mm) STS-B 75844 1.0
5 MST Adjusting Mechanism MSTAM 79435 2.8
6 MST Mounting Bracket LH (incl. bushings) MST-MBL 79436 5.7
7 MST Mounting Bracket RH (incl. bushings) MST-MBR 79437 5.7
8 MST HD Clamp* MSTCHD 79439 2.5
9 MST Bushing Kit (incl. 4 bushings) MSTBK 79440 0.2
10 MST Guide Pole MSTGT 79441 1.5 MST Spring Tensioner Selection Chart
11 MST HD Pole Mount* MSTPMHD 79451 7.3
12 MST Drop Brackets (2) MSTDB 79434 27.7 79431 79432 79433
13 P SS Shield PSSS 74773 0.5 CLEANER SIZE MSTHD-W MSTHD-S MSTHD-B
MST HD Tensioner w/White Spring* FMS 18" - 30"
- MSTHD-W 79431 36.8 X
(incl. 1 ea. items 6, 7; 2 ea. items 4a, 5, 8, 10 & 11) (450 - 750mm)
MST HD Tensioner w/Silver Spring* FMS 36" - 54"
- MSTHD-S 79432 37.5 X
(incl. 1 ea. items 6, 7; 2 ea. items 4b, 5, 8, 10 & 11) (900 - 1350mm)
MST HD Tensioner w/Black Spring* FMS 60" - 72"
- MSTHD-B 79433 38.1 X
(incl. 1 ea. items 6, 7; 2 ea. items 4c, 5, 8, 10 & 11) (1500 - 1800mm)
*Hardware Included
U.S. Patent No. 6,823,983; 7,093,706

Product Ordering MHS
Heavy Duty Secondary Cleaner
Information (SST Tensioners)
MHS HD Secondary with C-Tips
24 600 MHS-24 75910 124.6
30 750 MHS-30 75911 129.5
36 900 MHS-36 75912 140.0
42 1050 MHS-42 75913 150.4
48 1200 MHS-48 75914 160.9
54 1350 MHS-54 75915 171.3
60 1500 MHS-60 75916 181.8
72 1800 MHS-72 75917 208.3
84 2100 MHS-84 76803 243.0
96 2400 MHS-96 79043 277.7
MHS HD Secondary with V-Tips*

18 450 MHS-18V 76169 119.7
24 600 MHS-24V 76170 124.6
30 750 MHS-30V 76171 129.5
36 900 MHS-36V 76172 140.0
42 1050 MHS-42V 76173 150.4
48 1200 MHS-48V 76174 160.9
54 1350 MHS-54V 76175 171.3
60 1500 MHS-60V 76176 181.8
72 1800 MHS-72V 76177 208.3
84 2100 MHS-84V 76804 243.1
96 2400 MHS-96V 79044 277.9
Replacement Tips
ORDERING ITEM WT.
NUMBER CODE LBS.
ICT6 74535 0.7
RSA150 73628 1.3

in. 18 24 30 36 42 48 54 60 72 84 96
mm 450 600 750 900 1050 1200 1350 1500 1800 2100 2400
C-Tips or V-Tips
3 4 5 6 7 8 9 10 12 14 16
Required
Product Notes:
• Heavy-duty design to deliver maximum cleaning efficiency on the most demanding, abusive beltlines.
• Patented PowerFlex™ cushion design to maintain continuous blade-to-belt contact and quick relief from passing
mechanical splices.
• Visual Blade Tension Check: Measure the tension spring and refer to Spring Length Chart on mounting base for
the correct length for best cleaning performance.
• Tensioner: SST Spring Tensioner for self-adjusting tensioning with easy retensioning adjustments.
U.S. Patent No. 6,823,983; 7,093,706
Information (MST Tensioners)

18 450 MHS-18V-MST 79442 105.1
24 600 MHS-24V-MST 79443 115.1
30 750 MHS-30V-MST 79444 125.0
36 900 MHS-36V-MST 79445 135.5
42 1050 MHS-42V-MST 79446 145.4
48 1200 MHS-48V-MST 79447 155.3
54 1350 MHS-54V-MST 79448 169.4
60 1500 MHS-60V-MST 79449 180.4
72 1800 MHS-72V-MST 79450 201.1
MHS HD Reversing with V-Tips*

18 450 MHS-18RMV 79624 105.9
24 600 MHS-24RMV 79625 116.2
30 750 MHS-30RMV 79626 126.4
36 900 MHS-36RMV 79627 137.2
42 1050 MHS-42RMV 79628 147.4
48 1200 MHS-48RMV 79629 157.5
54 1350 MHS-54RMV 79630 171.9
60 1500 MHS-60RMV 79631 183.2
72 1800 MHS-72RMV 79632 204.5
Replacement Tips
ORDERING ITEM WT.
NUMBER CODE LBS.
RSA150 73628 1.3

in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
C-Tips or V-Tips
3 4 5 6 7 8 9 10 12
Required
Product Notes:
mechanical splices.
• V-Tips are for vulcanized belts only.
• Tensioner: MST Spring Tensioner for self-adjusting tensioning with easy retensioning adjustments.

Information (Polyurethane Cushion Shields, SST Tensioners)
MHS HD Secondary with C-Tips
24 600 MHS-24RU 79738 125.8
30 750 MHS-30RU 79739 131.0
36 900 MHS-36RU 79740 141.8
42 1050 MHS-42RU 79741 152.5
48 1200 MHS-48RU 79742 163.3
54 1350 MHS-54RU 79743 174.0
60 1500 MHS-60RU 79744 184.8
72 1800 MHS-72RU 79745 211.9
84 2100 MHS-84RU 79746 247.2
96 2400 MHS-96RU 79747 282.5

18 450 MHS-18RUV 79748 120.6
24 600 MHS-24RUV 79749 125.8
30 750 MHS-30RUV 79750 131.0
36 900 MHS-36RUV 79751 141.8
42 1050 MHS-42RUV 79752 152.5
48 1200 MHS-48RUV 79753 163.3
54 1350 MHS-54RUV 79754 174.0
60 1500 MHS-60RUV 79755 184.8
72 1800 MHS-72RUV 79756 211.9
84 2100 MHS-84RUV 79757 247.3
96 2400 MHS-96RUV 79758 282.7
Replacement Tips Replacement Cushion Shield

ICT6 74535 0.7 UPFCC 79320 .3
RSA150 73628 1.3
Polyurethane Cushion Shield
in. 18 24 30 36 42 48 54 60 72 84 96
mm 450 600 750 900 1050 1200 1350 1500 1800 2100 2400
C-Tips or V-Tips
3 4 5 6 7 8 9 10 12 14 16
Required
Product Notes:
mechanical splices.
• Tensioner: SST Spring Tensioner for self-adjusting tensioning with easy retensioning adjustments.
U.S. Patent No. 6,823,983; 7,093,706
Product Ordering MHS Reversing
Information
MHS HD Reversing Secondary with C-Tips
24 600 MHS-24R 76613 128.2
30 750 MHS-30R 76614 134.0
36 900 MHS-36R 76615 145.4
42 1050 MHS-42R 76616 156.7
48 1200 MHS-48R 76617 168.1
54 1350 MHS-54R 76618 179.4
60 1500 MHS-60R 76619 190.8
72 1800 MHS-72R 76620 219.1
84 2100 MHS-84R 76621 247.4
96 2400 MHS-96R 79045 275.7
MHS HD Reversing Secondary with V-Tips*

18 450 MHS-18RV 76646 122.4
24 600 MHS-24RV 76647 128.2
30 750 MHS-30RV 76648 134.0
36 900 MHS-36RV 76649 145.4
42 1050 MHS-42RV 76650 156.7
48 1200 MHS-48RV 76651 168.1
54 1350 MHS-54RV 76652 179.4
60 1500 MHS-60RV 76653 190.8
72 1800 MHS-72RV 76654 219.1
84 2100 MHS-84RV 76805 255.6
96 2400 MHS-96RV 79046 292.1
Replacement Shields Replacement Tips

DESCRIPTION NUMBER CODE LBS. NUMBER CODE LBS.
P Stainless Steel Shield PSSS 74773 0.5 ICT6 74535 0.7
PowerFlex™ Reverse Shield PFRS 76622 0.4 RSA150 73628 1.3
Product Notes:
• A cleaner for applications where the belt travels in both directions.
MHS HD with SAT2 Tensioner*
24 600 MHS-24P 78736 102.4
30 750 MHS-30P 78737 107.3
36 900 MHS-36P 78738 116.4
42 1050 MHS-42P 78739 126.8
48 1200 MHS-48P 78740 137.3
54 1350 MHS-54P 78741 147.7
60 1500 MHS-60P** 78742 158.2
72 1800 MHS-72P** 78743 183.9
84 2100 MHS-84P** 78744 209.6
96 2400 MHS-96P** 79047 292.1 Product Notes:
*Includes Control Box • The SAT2 Tensioners automatically adjust the blades to the belt
**60"-96" models have a 3-piece pole. until the blades are worn out.
• Does not include air tank. Select option on page 89.
U.S. Patent No. 6,823,983; 7,093,706

Information
Air Tanks
ORDERING ITEM WT.
NUMBER CODE LBS.
PAT1 78684 13.0
PAT2 78685 13.0
1
ORDERING ITEM WT.
2 PATHK 78794 1.5
Product Notes:

PATHK* 78794 1.5 PANK* 78799 5.0
*incl. 10' hose, 1' poly spiral wrap, 2 hose clamps *incl. Nitrogen Regulator, 10' hose, 2
hose clamps
Product Ordering Stainless Steel MHS
Information
SS MHS HD Secondary with C-Tips
BELT WIDTH ORDERING ITEM
in. mm NUMBER CODE
24 600 MHS-24-S/S 77601
30 750 MHS-30-S/S 77602
36 900 MHS-36-S/S 77603
42 1050 MHS-42-S/S 77604
48 1200 MHS-48-S/S 77605
54 1350 MHS-54-S/S 77606
60 1500 MHS-60-S/S 77607
72 1800 MHS-72-S/S 77608
84 2100 MHS-84-S/S 77609
96 2400 MHS-96-S/S 79048
SS MHS HD Secondary with V-Tips*

in. mm NUMBER CODE
24 600 MHS-24V-S/S 77610
30 750 MHS-30V-S/S 77611
36 900 MHS-36V-S/S 77612
42 1050 MHS-42V-S/S 77613
48 1200 MHS-48V-S/S 77614
54 1350 MHS-54V-S/S 77615
60 1500 MHS-60V-S/S 77616
72 1800 MHS-72V-S/S 77617
84 2100 MHS-84V-S/S 77618
96 2400 MHS-96V-S/S 79049 SS MHS HD Reversing Secondary with C-Tips
*NOTE: V-Tips can be used ONLY on vulcanized belts. BELT WIDTH ORDERING ITEM
in. mm NUMBER CODE
For replacement tips and qty of tips per cleaner, see page 96. 24 600 MHS-24R-S/S 77640
30 750 MHS-30R-S/S 77641
36 900 MHS-36R-S/S 77642
42 1050 MHS-42R-S/S 77643
48 1200 MHS-48R-S/S 77644
54 1350 MHS-54R-S/S 77645
60 1500 MHS-60R-S/S 77646
72 1800 MHS-72R-S/S 77647
84 2100 MHS-84R-S/S 77648
96 2400 MHS-96R-S/S 79050
SS MHS HD Reversing Secondary with V-Tips*

in. mm NUMBER CODE
24 600 MHS-24RV-S/S 77649
30 750 MHS-30RV-S/S 77650
36 900 MHS-36RV-S/S 77651
42 1050 MHS-42RV-S/S 77652
48 1200 MHS-48RV-S/S 77653
54 1350 MHS-54RV-S/S 77654
60 1500 MHS-60RV-S/S 77655
72 1800 MHS-72RV-S/S 77656
84 2100 MHS-84RV-S/S 77657
96 2400 MHS-96RV-S/S 79051
U.S. Patent No. 6,823,983; 7,093,706

Specifications MHS
& Guidelines
Overall Pole Length
MAXIMUM Maximum Conveyor Span
CLEANER SIZE BLADE WIDTH POLE LENGTH
CONVEYOR SPAN
18 450 18 450 72 1800 62 1550
24 600 24 600 78 1950 68 1700
30 750 30 750 84 2100 74 1850
36 900 36 900 90 2250 80 2000
42 1050 42 1050 96 2400 86 2150
48 1200 48 1200 102 2550 92 2300
54 1350 54 1350 108 2700 98 2450
Installation
60 1500 60 1500 114 2850 104 2600
Vertical HORIZONTAL VERTICAL
72 1800 72 1800 126 3150 116 2900
CLEARANCE CLEARANCE
84 2100 84 2100 138 3450 128 3200 REQUIRED REQUIRED
96 2400 96 2400 150 3750 140 3500 in. mm in. mm
*For special extra long pole length requirements, a Pole Extender Kit (#76024) is
available that provides 30" (750mm) of extended pole length. (Page page 131). 4 100 10 245
Pole Diameter - 2-7/8" (73mm) Horizontal
SAT2 Tensioner
SST Tensioner Spring Length Chart MST Tensioner Spring Length Chart Pressure Chart
Blade White Silver Black Gold Blade 2 White 2 Silver 2 Black Blade
Pressure
Width Spring Spring Spring Spring Width Springs Springs Springs Width Blades
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm psi kPa
18 450 3 3/8 86 4 102 N/A N/A N/A N/A 18 450 2 7/8 73 3 3/8 86 3 1/2 89 18 450 3 15# 103
24 600 3 1/8 79 3 7/8 98 N/A N/A N/A N/A 24 600 2 5/8 67 3 3/8 86 3 3/8 86 24 600 4 19# 131
30 750 2 7/8 73 3 3/4 95 N/A N/A N/A N/A 30 750 2 3/8 60 3 1/4 83 3 3/8 86 30 750 5 23# 159
36 900 N/A N/A 3 3/4 95 3 7/8 98 N/A N/A 36 900 2 1/8 54 3 1/8 79 3 1/4 83 36 900 6 27# 186
42 1050 N/A N/A 3 5/8 92 3 3/4 95 N/A N/A 42 1050 1 7/8 48 3 76 3 1/8 79 42 1050 7 31# 214
48 1200 N/A N/A 3 1/2 89 3 5/8 92 N/A N/A 48 1200 N/A N/A 2 7/8 73 3 1/8 79 48 1200 8 35# 241
54 1350 N/A N/A 3 3/8 86 3 5/8 92 3 3/4 95 54 1350 N/A N/A 2 7/8 73 3 76 54 1350 9 39# 269
60 1500 N/A N/A 3 1/4 83 3 1/2 89 3 3/4 95 60 1500 N/A N/A 2 3/4 70 2 7/8 73 60 1500 10 43# 296
72 1800 N/A N/A N/A N/A 3 3/8 86 3 5/8 92 72 1800 N/A N/A 2 1/2 64 2 3/4 70 72 1800 12 51# 352
84 2100 N/A N/A N/A N/A 3 1/8 79 3 1/2 89 Shading indicates preferred spring option. Measure 84 2100 14 59# 407
96 2400 N/A N/A N/A N/A N/A N/A 3 1/2 89 spring as shown below. 96 2400 16 67# 462
108 2700 N/A N/A N/A N/A N/A N/A 3 3/8 86
120 3000 N/A N/A N/A N/A N/A N/A 3 3/8 86
Shading indicates preferred spring option. Measure spring as
shown below.
MST
Bottom of Pole
SST
Mount to Bottom
Top of Washer to of Spring Support
Mounting Base Plate
Specifications
• Maximum Belt Speed.......................................................SST/SAT2 Tensioner - 1200 FPM (6m/s)
• Maximum Belt Speed.......................................................MST Tensioner - 1000 FPM (5m/s)
• Temperature Rating..........................................................-30°F to 180°F (-35°C to 82°C)
• Usable Blade Wear Length..............................................3/8" (9mm)
• Blade Materials.................................................................C-Tip: Impact Resistant Tungsten Carbide (works with mechanical fasteners)
• Available for Belt Widths.................................................SST/SAT2 Tensioners - 18" to 96" (450 to 2400 mm). Other sizes available upon request.
• Available for Belt Widths.................................................MST Tensioners - 18" to 72" (450 to 1800mm). Other sizes available upon request.
• CEMA Cleaner Rating.......................................................Class 5
U.S. Patent No. 6,823,983; 7,093,706
Replacement MHS
Parts List 9a 9b
3 For cleaners/tensioners
12 L1 L2 shipped prior to 12/31/14
2 2a ONLY*
11 1
14 4a 4b 4c 4d
Stainless Steel Shields on 7 L3

Reversing MHS Cleaner
10
Replacement Parts
ORDERING ITEM WT.
18" (450mm) Pole MHSP-18 76178 46.2
24" (600mm) Pole MHSP-24 75918 51.7
30" (750mm) Pole MHSP-30 75919 57.2
36" (900mm) Pole MHSP-36 75920 62.8
42" (1050mm) Pole MHSP-42 75921 68.3 5
1 48" (1200mm) Pole MHSP-48 75922 73.9
54" (1350mm) Pole MHSP-54 75923 79.4
Polyurethane Cushion Shield
60" (1500mm) Pole MHSP-60 75924 85.0
72" (1800mm) Pole MHSP-72 75925 96.1
84" (2100mm) Pole MHSP-84 76814 112.1
96" (2400mm) Pole MHSP-96 79052 128.1 Replacement Parts
2 C-Tip* ICT6 74535 0.7
2a V-Tip* (for vulcanized belts only) RSA150 73628 1.3 ORDERING ITEM WT.
3 PowerFlex™ Cushion* (complete) PFC 75927 4.2 REF DESCRIPTION NUMBER CODE LBS.
3a PowerFlex Cushion* SS (complete) PFC-SS 76560 4.2 HD Spring Tensioner* - White
– includes 2 each items 4, 5, 6, & 9) SST2HD-W 77879 60.6
for belts 18" - 30" (450-750mm)
STS-W 75846 0.5 for belts 18" - 30" (450-750mm)
HD Spring Tensioner* - Silver
4b Tension Spring - Silver (1 ea.) STS-S 75843 0.8 – (includes 2 each items 4a, 5, 6, & 9) SST2HD-S 77880 61.4
for belts 36" - 48" (900-1200mm) for belts 36" - 48" (900-1200mm)
4c Tension Spring - Black (1 ea.) STS-B 75844 1.0 HD Spring Tensioner* - Black
for belts 54" - 84" (1350-2100mm) – (includes 2 each items 4b, 5, 6, & 9a) SST2HD-B 77881 62.0
4d Tension Spring - Gold (1 ea.) STS-G 78142 1.3 for belts 54" - 84" (1350-2100mm)
for belts 96" (2400mm) HD Spring Tensioner* - Gold
HD Torsion Pole Mount* (1 ea.) – (includes 2 each items 4c, 5, 6, & 9a) SST2HD-G 79041 62.6
5 (includes HD adjusting rod, nuts & sleeve) SSTHDPM 77868 15.0 for belts 96" (2400mm)
(See 9 & 9a for bushings)
HD Mounting Base Kit*
6 (includes 1 mounting base, 2 slide guides,
top hat bracket & bottom bushing)
SSTHDMK 77870 10.2 Spring Tensioner Selection Chart
7 SST Hat Bracket (pair) SSTHB 79582 3.5 77879 77880 77881 79041
8 Slide Guide Kit* (incl. 2 slide guides) STGK2 77867 1.1 CLEANER SIZE SST2HD-W SST2HD-S SST2HD-B SST2HD-G
9a SST Bushing Kit - White/Silver SSTBK-W 76636 0.1 MHS 18" - 30"
(includes 2 bushings) X
(450 - 750mm)
9b SST Bushing Kit - Black/Gold SSTBK-B 76637 0.1 MHS 36" - 48"
(includes 2 bushings) X
10 SST Lower Bushing Kit (pair) SSTLBK 79493 0.1 (900 - 1200mm)
11 P Stainless Steel Shield PSSS 74773 0.5 MHS 54" - 84"
X
12 PowerFlex™ Reverse Shield PFRS 76622 0.4 (1350 - 2100mm)
13 Polyurethane Cushion Shield UPFCC 79320 0.3 MHS 96" (2400mm) X
14 Jam Nut Kit SST JNK-C 79893 0.3
*Hardware Included
Legacy Replacement Parts for

Tensioners shipped prior to Dec. 31, 2014*
ORDERING ITEM WT. *Verify if legacy parts are needed
REF DESCRIPTION NUMBER CODE LBS. by looking at threaded rod. If it has
Adjusting Rod Kit standard threads, use legacy parts. If
L1 (includes 1 rod, 2 nuts, 1 bushing, 1 washer) STAK 75847 2.9 it has flat/acme threads, choose from
for belts 24"-60" (600-1500mm)
HD Adjusting Rod Kit regular replacement parts.
L2 (includes 1 rod, 2 nuts, 1 HD bushing, 1 washer) STAKHD 75892 3.0
for belts 72"-96" (1800-2400mm)
L3 Legacy SST Hat Channel Kit SSTHK 79070 1.5 Standard Acme/trapezoidal
L4 SAT2 Adjusting Rod Kit (2 ea.) SAT2AK 78733 5.0 thread profile thread profile
SST Tensioner Bushing Update Kit
– (includes 2 lower bushings, 2 sleeves, 2 nuts)
SST-BUK 76943 0.3 U.S. Patent No.
6,823,983; 7,093,706

Replacement MHS
Parts List Optional MST and SAT2 Tensioners
18
17
19
25
20
24
26
29
13a 27
15 13b
16 13c
14 28 30 PAT Control Box
22 Secondary Air Tensioner 2 with Control Box

23 Secondary Air Tensioner 2 w/o Control Box
21
MST Tensioner SAT2 (Secondary Air Tensioner 2)
Replacement Parts Replacement Parts
Tension Spring - White (1 ea.) for belts 18" - 30" 22 SAT2 w/PAT Control Box SAT2PAT 78735 43.5
13a STS-W 75846 0.5
(450-750mm)
23 SAT2 w/o Control Box SAT2NCB 78703 41.0
Tension Spring - Silver (1 ea.) for belts 36" - 54"
13b STS-S 75843 0.8
(900-1350mm) 24 SAT Air/Water Bag Kit (1 ea.) SATB 76083 5.1
Tension Spring - Black (1 ea.) for belts 60" - 72" 25 SAT 1/8" Hose Barb Kit (2 ea.) SATHB 76084 0.1
13c STS-B 75844 1.0
(1500-1800mm)
14 MST Adjusting Mechanism MSTAM 79435 2.8 26 SAT2 Mounting Base Kit (2 ea.) SAT2MK 78704 11.6
15 MST Mounting Bracket LH (incl. bushings) MST-MBL 79436 5.7 27 ST Slide Guide Kit (1 ea.) STGK2 77867 1.1
16 MST Mounting Bracket RH (incl. bushings) MST-MBR 79437 5.7 SAT2 Torsion Pole Mount (2 ea.)
28 SAT2PM 78732 11.1
(incl. threaded rods and nuts)
17 MST HD Clamp* MSTCHD 79439 2.5
29 SAT2 Adjusting Rod Kit SAT2AK 78733 5.0
18 MST Bushing Kit (incl. 4 bushings) MSTBK 79440 .2
30 PAT Control Box 100psi PACB100 79656 11.0
19 MST Guide Pole MSTGT 79441 1.5
20 MST HD Pole Mount* MSTPMHD 79451 7.3
21 MST Drop Brackets (2) MSTDB 79434 27.7
MST HD Tensioner w/White Spring*
- (incl. 1 ea. items 15,16,18; 2 ea. items 13a,14,17,19,20)
MSTHD-W 79431 36.8
MST HD Tensioner w/Silver Spring*
- MSTHD-S 79432 37.5
(incl. 1 ea. items 15,16,18; 2 ea. items 13b,14,17,19,20)
MST HD Tensioner w/Black Spring*
- MSTHD-B 79433 38.1
(incl. 1 ea. items 15,16,18; 2 ea. items 13c,14,17,19,20)
*Hardware included
MST Spring Tensioner Selection Chart

79431 79432 79433
CLEANER SIZE MSTHD-W MSTHD-S MSTHD-B
MHS 18" - 30"
X
(450 - 750mm)
MHS 36" - 54"
X
(900 - 1350mm)
MHS 60" - 72"
X
(1500 - 1800mm)
Replacement Stainless Steel MHS
Parts List Heavy Duty Secondary Cleaner
9a 9b
For cleaners/tensioners
12 3 L1 L2 shipped prior to Dec. 31, 2014
ONLY*.
1 2 2a 2b 2c
11
4a 4b 4c 4d
Stainless Steel Shields on

Reversing MHS Cleaner 8 L3
10
Replacement Parts
ORDERING ITEM
REF DESCRIPTION NUMBER CODE
24" (600mm) SS Pole MHSP24-S/S 77620 7
30" (750mm) SS Pole MHSP30-S/S 77621
36" (900mm) SS Pole MHSP36-S/S 77622
42" (1050mm) SS Pole MHSP42-S/S 77623
48" (1200mm) SS Pole MHSP48-S/S 77624
1 5
54" (1350mm) SS Pole MHSP54-S/S 77625
60" (1500mm) SS Pole MHSP60-S/S 77626
72" (1800mm) SS Pole MHSP72-S/S 77627
84" (2100mm) SS Pole MHSP84-S/S 77628
96" (2400mm) SS Pole MHSP96-S/S 79053 Legacy Replacement Parts for Tensioners
2 C-Tip* ICT6 74535 shipped prior to Dec. 31, 2014*
2a SS C-Tip ICT6-S/S 78700
2b V-Tip* (for vulcanized belts only) RSA150 73628 ORDERING ITEM
2c S/S V-Tip* (for vulcanized belts only) RVT6-S/S 76205 REF DESCRIPTION NUMBER CODE
3 PowerFlex Cushion* (complete) PFC-SS 76560 Adjusting Rod Kit*
L1 (includes 1 rod, 2 nuts, 1 bushing, 1 washer) STAK 75847
for belts 18" - 30" (450-750mm)
STS-W-S/S 77630 for belts 18" - 60" (450-1500mm)
Tension Spring - Silver (1 ea.) HD Adjusting Rod Kit*

4b for belts 36" - 48" (900-1200mm)
STS-S-S/S 77631 L2 (includes 1 rod, 2 nuts, 1 HD bushing, 1 washer) STAKHD 75892
for belts 72" - 96" (1800-2400mm)
4c Tension Spring - Black (1 ea.) STS-B-S/S 77632
for belts 54" - 84" (1350-2100mm) L3 SST Hat Channel Kit S/S SSTHK-S/S 79071
Tension Spring - Gold (1 ea.) – SS Bushing Update Kit SST-BUK-S/S 77636
4d for belts 96" (2400)
STS-G-S/S 79057 (includes 2 ea. lower bushings, sleeves, nuts)
SS HD Torsion Mounting Kit* (1 ea.) *Verify if legacy parts are needed by looking at threaded rod. If it has
5 (includes adjusting rod, 3 nuts, & sleeve) STHDPM2-S/S 77633
(See 9 & 9a for bushings) standard threads, use legacy parts.
SS Mounting Base Kit* If it has flat/acme threads, choose from regular replacement parts.
6 (includes 1 mounting base, 2 slide guides, top STHDMK2-S/S 77634
hat bracket & bottom bushing
7 SS Base Mounting Kit* STGK2-S/S 77635 Standard Acme/trapezoidal

(includes 2 slide guides)
thread profile thread profile
8 SST Hat Bracket S/S (pair) SSTHB-S/S 79586
9a SST Bushing Kit - White/Silver SSTBK-W 76636
9b SST Bushing Kit - Black/Gold SSTBK-B 76637

10 SST Lower Bushing Kit (pair) SSTLBK 79493
11 P Stainless Steel Shield PSSS 74773
12 PowerFlex™ Reverse Shield PFRS 76622 77637 77638 77639 79042
SS Spring Tensioner* - White SSTHD- SSTHD- SSTHD- SST2HD-
– (includes 2 each items 4, 5, 6 & 9) SST2HD-W-S/S 77637 CLEANER SIZE W-S/S S-S/S B-S/S G-S/S
for belts 18" - 30" (450-750mm)
MHS S/S 18" - 30"
SS Spring Tensioner* - Silver X
– (includes 2 each items 4a, 5, 6 & 9) SST2HD-S-S/S 77638 (450 - 750mm)
for belts 36" - 48" (900-1200mm) MHS S/S 36" - 48"
X
SS Spring Tensioner* - Black (900 - 1200mm)
– (includes 2 each items 4b, 5, 6 & 9a) SST2HD-B-S/S 77639 MHS S/S 54" - 84"
for belts 54" - 84" (1350-2100mm) X
(1350 - 2100mm)
SS Spring Tensioner* - Gold
– (includes 2 each items 4c, 5, 6 & 9a) SST2HD-G-S/S 79042 MHS S/S 96" (2400mm) X
*Hardware Included
U.S. Patent No. 6,823,983; 7,093,706

Product Ordering P-Type® ESAC
Secondary Cleaner
Information with Enhanced Service Advantage Cartridge
P-Type ESAC Secondary with C-Tips

CLEANER COMPLETE
24 600 PC24-ESAC 77955 137.4
30 750 PC30-ESAC 77956 150.8
P-Type ESAC Single Cartridge
36 900 PC36-ESAC 77957 164.0
42 1050 PC42-ESAC 77958 177.3
48 1200 PC48-ESAC 77959 190.5
54 1350 PC54-ESAC 77960 203.9
60 1500 PC60-ESAC 77961 217.2
72 1800 PC72-ESAC 77962 243.8
60 1500 PC60-2ESAC 77963 303.7
72 1800 PC72-2ESAC 77964 330.8
84 2100 PC84-2ESAC 77965 358.2
96 2400 PC96-2ESAC 77966 385.2
120 3000 PC120-2ESAC 77967 443.8 P-Type 2ESAC Dual Cartridge
P-Type ESAC Secondary with V-Tips* Replacement Tips

CLEANER COMPLETE
BELT WIDTH ORDERING ITEM WT. ORDERING ITEM WT.
in. mm NUMBER CODE LBS. NUMBER CODE LBS.
24 600 PV24-ESAC 77981 137.4 ICT6 74535 0.7
30 750 PV30-ESAC 77982 150.8 PSA150 73156 1.0
36 900 PV36-ESAC 77983 164.0
42 1050 PV42-ESAC 77984 177.3
48 1200 PV48-ESAC 77985 190.5
54 1350 PV54-ESAC 77986 203.9
60 1500 PV60-ESAC 77987 217.2
72 1800 PV72-ESAC 77988 243.8 Tips Required Per Cleaner Size
60 1500 PV60-2ESAC 77989 303.7 in. 24 30 36 42 48 54 60 72 84 96 120
72 1800 PV72-2ESAC 77990 330.8
mm 600 750 900 1050 1200 1350 1500 1800 2100 2400 3000
84 2100 PV84-2ESAC 77991 358.2
C-Tips or V-Tips
96 2400 PV96-2ESAC 77992 385.2 4 5 6 7 8 9 10 12 14 16 20
Required
120 3000 PV120-2ESAC 77993 443.8
Product Notes:
• Patented Enhanced Service Advantage Cartridge™ allows for easy removal in even the dirtiest conditions.
• Pole Length: Belt width plus 54" (1350mm) (single cartridge cleaners); Belt width plus 60" (1500mm) (dual cartridge cleaners).
• Tips are set at a non-aggressive 70° angle to give quick relief for passing mechanical splices.
• Tensioner mounting brackets included for fast and easy installation.
• Cartridge Removal Kit included for easy removal of the cartridge.
U.S. Patent No. 7,987,966; Patent Pending
Product Ordering P-Type® ESAC
Secondary Cleaner
Information Replacement Cartridge Kits
P-Type ESAC Cartridge Kits with C-Tips

24 600 P-CARK-C24/600 78072 25.2
30 750 P-CARK-C30/750 78073 30.0
36 900 P-CARK-C36/900 78074 34.7
42 1050 P-CARK-C42/1050 78075 39.5
48 1200 P-CARK-C48/1200 78076 44.1
54 1350 P-CARK-C54/1350 78077 48.9 P-Type ESAC Single Cartridge Kit
60 1500 P-CARK-C60/1500 78078 53.7
72 1800 P-CARK-C72/1800 78079 63.2
60 1500 P-CARK2-C60/1500 78088 87.5
72 1800 P-CARK2-C72/1800 78089 102.2
84 2100 P-CARK2-C84/2100 78090 117.3
96 2400 P-CARK2-C96/2400 78091 132.1
120 3000 P-CARK2-C120/3000 78092 162.3
P-Type ESAC Cartridge Kits with V-Tips* P-Type 2ESAC Dual Cartridge Kit
24 600 P-CARK-V24/600 78080 25.2
30 750 P-CARK-V30/750 78081 30.0
36 900 P-CARK-V36/900 78082 34.7
42 1050 P-CARK-V42/1050 78083 39.5
48 1200 P-CARK-V48/1200 78084 44.1
54 1350 P-CARK-V54/1350 78085 48.9
60 1500 P-CARK-V60/1500 78086 53.7
72 1800 P-CARK-V72/1800 78087 63.2
60 1500 P-CARK2-V60/1500 78093 87.5
72 1800 P-CARK2-V72/1800 78094 102.2
84 2100 P-CARK2-V84/2100 78095 117.3
96 2400 P-CARK2-V96/2400 78096 132.1
120 3000 P-CARK2-V120/3000 78097 162.3

Specifications P-Type® ESAC
Secondary Cleaner
& Guidelines with Enhanced Service Advantage Cartridge

CLEANER BLADE POLE MAXIMUM Overall Pole Length
VERSION SIZE WIDTH LENGTH CONVEYOR SPAN
24 600 24 600 78 1950 66 1650
30 750 30 750 84 2100 72 1800
36 900 36 900 90 2250 78 1950
42 1050 42 1050 96 2400 84 2100
Single
48 1200 48 1200 102 2550 90 2250
54 1350 54 1350 108 2700 96 2400
60 1500 60 1500 114 2850 102 2550
72 1800 72 1800 126 3150 114 2850
60 1500 60 1500 120 3000 108 2700
72 1800 72 1800 132 3300 120 3000
Dual 84 2100 84 2100 144 3600 132 3300
96 2400 96 2400 156 3900 144 3600
120 3000 120 3000 180 4500 168 4200
*For special extra long pole length requirements, a Pole Extender Kit (#76024)
is available that provides 30" (750mm) of extended pole length (page 131). Pole
Diameter - 2-7/8" (73mm)
Clearance Guidelines for Installation Aluminum Content

PERCENT
HORIZONTAL VERTICAL ALUMINUM
CLEARANCE CLEARANCE ALLOY TYPE Mg Ti
VERSION REQUIRED REQUIRED Magnesium Titanium
Vertical
in. mm in. mm 6061 1.0% 0.0%
Single 4-1/2 114 10-1/2 267
Dual 4-1/2 114 12-1/4 311
Horizontal
Specifications:
• Maximum Belt Speed..............................................1000 FPM (5m/s)
• Temperature Rating.................................................-30°F to 180°F (-35°C to 82°C)
• Usable Blade Wear Length....................................3/8" (9mm)
• Blade Materials........................................................C-Tip: Impact Resistant Tungsten Carbide (works with mechanical fasteners)
• Available for Belt Widths........................................24" to 120" (600 to 3000 mm). Other sizes available upon request.
• CEMA Cleaner Rating..............................................Class 4
Replacement P-Type® ESAC
Secondary Cleaner
Parts List with Enhanced Service Advantage Cartridge
8 3a
3
4
14 10
12 11
6
5 8
1
9 1a
2
13
2a
15 Tip Alignment Tool
for Dual Cartridge Cleaners
7
Replacement Parts
ESAC Cartridge Pole 24" SACPL-24/600 77887 65.4 3 C-Tip* ICT6 74535 0.7
ESAC Cartridge Pole 30" SACPL-30/750 77888 71.2 3a P V-Tip* (for vulcanized belts only) PSA150 73156 1.0
ESAC Cartridge Pole 36" SACPL-36/900 77889 77.1 4 P2 C-Tip Cushion* PHA 73626 2.0
ESAC Cartridge Pole 42" SACPL-42/1050 77890 82.9 5 Adjusting Bracket Kit* (1 ea.) PAB 75513 1.5
ESAC Cartridge Pole 48" SACPL-48/1200 77891 88.8 6 HD Pole Clamp Kit Left* (1 ea.) (incl. item 8) CCKHDL 79225 8.7
ESAC Cartridge Pole 54" SACPL-54/1350 77892 94.6 7 HD Pole Clamp Kit Right* (1 ea.) (incl. item 8) CCKHDR 79229 8.7
1 ESAC Cartridge Pole 60" SACPL-60/1500 77893 100.5 HD Cradle Clamp Top Strap (1 ea.)
8 CCKHDTS 79233 1.7
for use with L or R HD Pole Clamp Kit
ESAC Cartridge Pole 72" SACPL-72/1800 77894 112.2
9 EZS2MBK 75666 13.0
ESAC Cartridge Center Pole 60" (Dual) SACPL2-60/1500 77895 77.3 (1 Right and 1 Left)
ESAC Cartridge Center Pole 72" (Dual) SACPL2-72/1800 77896 89.5 HD Cradle Clamp Mounting Kit*
- CCMKHD 78920 36.7
(incl. 2 items 5; 1 ea. items 6, 7 & 9)
ESAC Cartridge Center Pole 84" (Dual) SACPL2-84/2100 77897 101.8
10 ESAC Removal Knuckle SACRKN 77882 3.2
11 ESAC Removal Handle SACRH 77883 3.0
12 ESAC Handle Lock Plate SACRHL 77884 1.7
1a Extender Pole MHP-EP 76392 54.0
(for use with Dual Cartridge Center Pole) 13 Knuckle Retainer Pin SACKRP 77885 0.2
ESAC Cartridge 24" CART-24/600 77900 3.5 14 SAC Hitch Pin SACHP2 77768 0.9
ESAC Cartridge 30" CART-30/750 77901 4.3 ESAC Removal Kit
- SACRKT 77886 9.0
ESAC Cartridge 36" CART-36/900 77902 5.1 (includes 1 ea. items 10-14)
ESAC Cartridge 42" CART-42/1050 77903 5.9 15 ESAC Cartridge Tip Alignment Tool (Dual) SAC2-TIP-TL 77866 2.5
ESAC Cartridge 48" CART-48/1200 77904 6.7 *Hardware Included
ESAC Cartridge 54" CART-54/1350 77905 7.4
2 ESAC Cartridge 60" CART-60/1500 77906 8.4
ESAC Cartridge 60" (Dual) CART2-60/1500 77908 8.6
ESAC Cartridge P-Type Adapter Plate 24" PCAP-24/600 77913 4.7
ESAC Cartridge P-Type Adapter Plate 30"§ PCAP-30/750 77914 6.1
2a
§ If using a dual cartridge, please take the cleaner size and divide by two. That dimension is
the size of the brackets needed for conversion to a P-Type cleaner.

Product Ordering R-Type® ESAC
Secondary Cleaner
R-Type ESAC Secondary with C-Tips

CLEANER COMPLETE
24 600 RC24-ESAC 77968 133.7
30 750 RC30-ESAC 77969 146.0
36 900 RC36-ESAC 77970 158.4
42 1050 RC42-ESAC 77971 170.7
R-Type ESAC Single Cartridge
48 1200 RC48-ESAC 77972 183.0
54 1350 RC54-ESAC 77973 195.3
60 1500 RC60-ESAC 77974 207.8
72 1800 RC72-ESAC 77975 232.4
60 1500 RC60-2ESAC 77976 237.0
72 1800 RC72-2ESAC 77977 259.4
84 2100 RC84-2ESAC 77978 281.8
96 2400 RC96-2ESAC 77979 304.2
120 3000 RC120-2ESAC 77980 354.0
R-Type 2ESAC Dual Cartridge
R-Type ESAC Secondary with V-Tips*

CLEANER COMPLETE Replacement Tips
24 600 RV24-ESAC 77994 133.7
ICT6 74535 0.7
30 750 RV30-ESAC 77995 146.0
RSA150 73628 1.3
36 900 RV36-ESAC 77996 158.4
42 1050 RV42-ESAC 77997 170.7
48 1200 RV48-ESAC 77998 183.0
54 1350 RV54-ESAC 77999 195.3
60 1500 RV60-ESAC 78000 207.8
72 1800 RV72-ESAC 78001 232.4 Tips Required Per Cleaner Size
60 1500 RV60-2ESAC 78002 237.0 in. 24 30 36 42 48 54 60 72 84 96 120
72 1800 RV72-2ESAC 78003 259.4
mm 600 750 900 1050 1200 1350 1500 1800 2100 2400 3000
84 2100 RV84-2ESAC 78004 281.8
C-Tips or V-Tips
96 2400 RV96-2ESAC 78005 304.2 4 5 6 7 8 9 10 12 14 16 20
Required
120 3000 RV120-2ESAC 78006 354.0
Product Notes:
• Patent-pending Enhanced Service Advantage Cartridge™ allows for easy removal in even the dirtiest conditions.
• Two-way cushions allow cleaning in both directions.
Product Ordering R-Type® ESAC
Secondary Cleaner
R-Type ESAC Cartridge Kits with C-Tips

24 600 R-CARK-C24/600 78098 27.1
30 750 R-CARK-C30/750 78099 32.3
36 900 R-CARK-C36/900 78100 36.4
42 1050 R-CARK-C42/1050 78101 42.6
48 1200 R-CARK-C48/1200 78102 47.7
54 1350 R-CARK-C54/1350 78103 52.9
60 1500 R-CARK-C60/1500 78104 58.2
72 1800 R-CARK-C72/1800 78105 68.5 R-Type ESAC Single Cartridge Kit
60 1500 R-CARK2-C60/1500 78114 69.6
72 1800 R-CARK2-C72/1800 78115 74.8
84 2100 R-CARK2-C84/2100 78116 85.2
96 2400 R-CARK2-C96/2400 78117 95.5
120 3000 R-CARK2-C120/3000 78118 116.5
R-Type ESAC Cartridge Kits with V-Tips*

24 600 R-CARK-V24/600 78106 27.1
30 750 R-CARK-V30/750 78107 32.3
R-Type 2ESAC Dual Cartridge Kit
36 900 R-CARK-V36/900 78108 36.4
42 1050 R-CARK-V42/1050 78109 42.6
48 1200 R-CARK-V48/1200 78110 47.7
54 1350 R-CARK-V54/1350 78111 52.9
60 1500 R-CARK-V60/1500 78112 58.2
72 1800 R-CARK-V72/1800 78113 68.5
60 1500 R-CARK2-V60/1500 78119 69.6
72 1800 R-CARK2-V72/1800 78120 74.8
84 2100 R-CARK2-V84/2100 78121 85.2
96 2400 R-CARK2-V96/2400 78122 95.5
120 3000 R-CARK2-V120/3000 78123 116.5

Specifications R-Type® ESAC
Secondary Cleaner

CLEANER BLADE POLE MAXIMUM Overall Pole Length
VERSION SIZE WIDTH LENGTH CONVEYOR SPAN
in. mm in. mm in. mm in. mm Maximum Conveyor Span
24 600 24 600 78 1950 66 1650
30 750 30 750 84 2100 72 1800
36 900 36 900 90 2250 78 1950
42 1050 42 1050 96 2400 84 2100
Single
48 1200 48 1200 102 2550 90 2250
54 1350 54 1350 108 2700 96 2400
60 1500 60 1500 114 2850 102 2550
72 1800 72 1800 126 3150 114 2850
60 1500 60 1500 120 3000 108 2700
72 1800 72 1800 132 3300 120 3000
Dual 84 2100 84 2100 144 3600 132 3300
96 2400 96 2400 156 3900 144 3600
120 3000 120 3000 180 4500 168 4200
available that provides 30" (750mm) of extended pole length. (page 131). Pole

HORIZONTAL VERTICAL PERCENT
ALUMINUM
CLEARANCE CLEARANCE ALLOY TYPE Mg Ti
VERSION REQUIRED REQUIRED Vertical Magnesium Titanium
in. mm in. mm 6061 1.0% 0.0%
Single 4-1/2 114 10 254
Dual 4-1/2 114 11-3/4 298
Horizontal
Specifications:
• Available for Belt Widths........................................24" to 120" (600 to 3000mm). Other sizes available upon request.
Replacement R-Type® ESAC
Secondary Cleaner
Parts List with Enhanced Service Advantage Cartridge
8 3a
3 For Replacement Cartridge
4 Kits, see page 100.
14 10
12
11
6
5
1 8
9 1a
2
13
2a
15 Tip Alignment Tool
for Dual Cartridge Cleaners
7
Replacement Parts
ESAC Cartridge Pole 24" SACPL-24/600 77887 65.4 3 C-Tip* ICT6 74535 0.7
ESAC Cartridge Pole 30" SACPL-30/750 77888 71.2 3a R V-Tip* (for vulcanized belts only) RSA150 73628 1.3
ESAC Cartridge Pole 36" SACPL-36/900 77889 77.1 4 R2 C-Tip Cushion* RSA 76249 2.0
ESAC Cartridge Pole 42" SACPL-42/1050 77890 82.9 5 Adjusting Bracket Kit* (1 ea.) PAB 75513 1.5
ESAC Cartridge Pole 48" SACPL-48/1200 77891 88.8 6 HD Pole Clamp Kit Left* (1 ea.) (incl. item 8) CCKHDL 79225 8.7
ESAC Cartridge Pole 54" SACPL-54/1350 77892 94.6 7 HD Pole Clamp Kit Right* (1 ea.) (incl. item 8) CCKHDR 79229 8.7
1 ESAC Cartridge Pole 60" SACPL-60/1500 77893 100.5 HD Cradle Clamp Top Strap (1 ea.)
8 CCKHDTS 79233 1.7
for use with L or R HD Pole Clamp Kit
ESAC Cartridge Center Pole 60" (Dual) SACPL2-60/1500 77895 77.3 9 EZS2MBK 75666 13.0
ESAC Cartridge Center Pole 72" (Dual) SACPL2-72/1800 77896 89.5 HD Cradle Clamp Mounting Kit*
- CCMKHD 78920 36.7
(incl. 2 ea. items 5; 1 ea. items 6, 7 & 9)
10 ESAC Removal Knuckle SACRKN 77882 3.2
11 ESAC Removal Handle SACRH 77883 3.0
12 ESAC Handle Lock Plate SACRHL 77884 1.7
Extender Pole (for use with Dual Cartridge
1a Center Pole)
MHP-EP 76392 54.0 13 Knuckle Retainer Pin SACKRP 77885 0.2
ESAC Cartridge 24" CART-24/600 77900 3.5 14 SAC Hitch Pin SACHP2 77768 0.9
ESAC Cartridge 30" CART-30/750 77901 4.3 ESAC Removal Kit
- SACRKT 77886 9.0
(includes 1 ea. items 10, 11, 12, 13 & 14)
15 ESAC Cartridge Tip Alignment Tool (Dual) SAC2-TIP-TL 77866 2.5
*Hardware Included
2 ESAC Cartridge 60" CART-60/1500 77906 8.4
ESAC Cartridge P-Type Adapter Plate 24" RCAP-24/600 77921 6.3
ESAC Cartridge P-Type Adapter Plate 30"§ RCAP-30/750 77922 7.9
2a
§ If using a dual cartridge, please take the cleaner size and divide by two. That dimension is
the size of the brackets needed for conversion to a P-Type cleaner.

Product Ordering MHS ESAC
HD Secondary Cleaner
MHS ESAC Secondary with C-Tips

24 600 MHS-24-ESAC 77840 195.0
30 750 MHS-30-ESAC 77841 206.5
36 900 MHS-36-ESAC 77842 218.5
42 1050 MHS-42-ESAC 77843 230.1 MHS ESAC Single Cartridge
48 1200 MHS-48-ESAC 77844 241.6
54 1350 MHS-54-ESAC 77845 253.2
60 1500 MHS-60-ESAC 77846 264.9
72 1800 MHS-72-ESAC 77847 288.4
60 1500 MHS-60-2ESAC 77848 309.1
72 1800 MHS-72-2ESAC 77849 332.9
84 2100 MHS-84-2ESAC 77850 356.6
96 2400 MHS-96-2ESAC 77851 381.1
120 3000 MHS-120-2ESAC 77852 432.5
MHS 2ESAC Dual Cartridge
MHS ESAC Secondary with V-Tips

BELT WIDTH ORDERING ITEM WT. Replacement Tips Replacement Shields
in. mm NUMBER CODE LBS. ORDERING ITEM WT. ORDERING ITEM WT.
24 600 MHS-24V-ESAC 77853 195.0 NUMBER CODE LBS. NUMBER CODE LBS.
30 750 MHS-30V-ESAC 77854 206.5 ICT6 74535 0.7 PFS-ESAC 79073 .5
36 900 MHS-36V-ESAC 77855 218.5 RSA150 73628 1.3 PFRS 76622 .4
42 1050 MHS-42V-ESAC 77856 230.1
48 1200 MHS-48V-ESAC 77857 241.6
54 1350 MHS-54V-ESAC 77858 253.2
60 1500 MHS-60V-ESAC 77859 264.9
72 1800 MHS-72V-ESAC 77860 288.4
60 1500 MHS-60V-2ESAC 77861 309.1 in. 24 30 36 42 48 54 60 72 84 96 120
72 1800 MHS-72V-2ESAC 77862 332.9 mm 600 750 900 1050 1200 1350 1500 1800 2100 2400 3000
84 2100 MHS-84V-2ESAC 77863 356.6 C-Tips or V-Tips
4 5 6 7 8 9 10 12 14 16 20
Required
96 2400 MHS-96V-2ESAC 77864 381.1
120 3000 MHS-120V-2ESAC 77865 432.5
Product Notes:
• Patent-pending Enhanced Service Advantage Cartridge™ allows for easy removal in even the dirtiest conditions.
• Patented PowerFlex™ cushion design to maintain continuous blade-to-belt contact and quick relief from passing mechanical
splices.
Product Ordering MHS ESAC
MHS ESAC Cartridge Kits with C-Tips

BELT WIDTH
ORDERING ITEM WT.
24 600 MHS-CARK-C24/600 77929 29.4
30 750 MHS-CARK-C30/750 77930 35.1
MHS ESAC Single Cartridge Kit
36 900 MHS-CARK-C36/900 77931 40.8
42 1050 MHS-CARK-C42/1050 77932 46.5
48 1200 MHS-CARK-C48/1200 77933 52.3
54 1350 MHS-CARK-C54/1350 77934 58.0
60 1500 MHS-CARK-C60/1500 77935 63.8
72 1800 MHS-CARK-C72/1800 77936 75.3
60 1500 MHS-CARK2-C60/1500 77945 70.2
72 1800 MHS-CARK2-C72/1800 77946 81.6
84 2100 MHS-CARK2-C84/2100 77947 93.1
96 2400 MHS-CARK2-C96/2400 77948 104.5
120 3000 MHS-CARK2-C120/3000 77949 127.7
MHS 2ESAC Dual Cartridge Kit
MHS ESAC Cartridge Kits with V-Tips

24 600 MHS-CARK-V24/600 77937 29.4
30 750 MHS-CARK-V30/750 77938 35.1
36 900 MHS-CARK-V36/900 77939 40.8
42 1050 MHS-CARK-V42/1050 77940 46.5
48 1200 MHS-CARK-V48/1200 77941 52.3
54 1350 MHS-CARK-V54/1350 77942 58.0
60 1500 MHS-CARK-V60/1500 77943 63.8
72 1800 MHS-CARK-V72/1800 77944 75.3
60 1500 MHS-CARK2-V60/1500 77950 70.2
72 1800 MHS-CARK2-V72/1800 77951 81.6
84 2100 MHS-CARK2-V84/2100 77952 93.1
96 2400 MHS-CARK2-V96/2400 77953 104.5
120 3000 MHS-CARK2-V120/3000 77954 127.7

Specifications MHS ESAC

CLEANER BLADE POLE MAXIMUM
VERSION SIZE WIDTH LENGTH CONVEYOR SPAN Overall Pole Length
24 600 24 600 78 1950 66 1650
30 750 30 750 84 2100 72 1800
36 900 36 900 90 2250 78 1950
42 1050 42 1050 96 2400 84 2100
Single
48 1200 48 1200 102 2550 90 2250
54 1350 54 1350 108 2700 96 2400
60 1500 60 1500 114 2850 102 2550
72 1800 72 1800 126 3150 114 2850
60 1500 60 1500 120 3000 108 2700
72 1800 72 1800 132 3300 120 3000
Dual 84 2100 84 2100 144 3600 132 3300
96 2400 96 2400 156 3900 144 3600
120 3000 120 3000 180 4500 168 4200
*For special extra long pole length requirements, a Pole Extender Kit (#76024) is
available that provides 30" (750mm) of extended pole length. (page 131). Pole

HORIZONTAL VERTICAL PERCENT
ALUMINUM
CLEARANCE CLEARANCE Mg Ti
VERSION ALLOY TYPE
REQUIRED REQUIRED Vertical Magnesium Titanium
in. mm in. mm 6061 1.0% 0.0%
Single 4-1/2 114 11 279
Dual 4-1/2 114 12-1/2 318
Horizontal
Spring Length Chart Spring Length Chart

for SST Spring Tensioner for CST Spring Tensioner
BLADE WHITE SILVER BLACK BLADE WHITE SILVER BLACK GOLD
WIDTH SPRING SPRING SPRING WIDTH SPRING SPRING SPRING SPRING
24" 3 1/8" 3 7/8" N/A 24" 3 1/8" 3 7/8" N/A N/A
30" 2 7/8" 3 3/4" N/A Top of Washer to 30" 2 7/8" 3 3/4" N/A N/A Top of Washer to
36" N/A 3 3/4" 3 7/8" Mounting Base 36" N/A 3 3/4" 3 7/8" N/A Mounting Base
42" N/A 3 5/8" 3 3/4" 42" N/A 3 5/8" 3 3/4" N/A (both springs)
48" N/A 3 1/2" 3 5/8" 48" N/A 3 1/2" 3 5/8" N/A
54" N/A 3 3/8" 3 5/8" 54" N/A 3 3/8" 3 5/8" N/A
60" N/A 3 1/4" 3 1/2" 60" N/A 3 1/4" 3 1/2" 4"
72" N/A N/A 3 3/8" 72" N/A N/A 3 3/8" 4"
Shading indicates preferred spring option 84" N/A N/A 3 1/8" 3 7/8"
96" N/A N/A N/A 3 7/8"
120" N/A N/A N/A 3 5/8"
Specifications:
• Available for Belt Widths........................................24" to 120" (600 to 3000 mm). Other sizes available upon request.
Replacement MHS ESAC
Parts List 15d
15c
with Enhanced Service Advantage Cartridge
18 15b
23 15a For SA Cartridge
17 19 3a Kits, see page 104. For cleaners/tensioners
25
3 shipped prior to Dec. 31,
20 2014 ONLY*.
5a L2
4 L1
5b 13
10 10a
24 Optional Chute Seal Kit 21
7 7a 7b
22
16 8 L3
14 11
26 Tip Alignment Tool 1 12
for Dual Cartridge Cleaners 1a
Replacement Parts 2 9
ORDERING ITEM WT. 6
ESAC Cartridge Pole 24" SACPL-24/600 77887 65.4 ORDERING ITEM WT.
ESAC Cartridge Pole 30" SACPL-30/750 77888 71.2 REF DESCRIPTION NUMBER CODE LBS.
ESAC Cartridge Pole 36" SACPL-36/900 77889 77.1 CST HD Mounting Base Kit*
ESAC Cartridge Pole 42" SACPL-42/1050 77890 82.9 14 (incl. 1 mounting base, 2 slide guides, top hat CSTHDMK 77871 8.5
ESAC Cartridge Pole 48" SACPL-48/1200 77891 88.8 bracket, & bottom bushing)
ESAC Cartridge Pole 54" SACPL-54/1350 77892 94.6 15a
CST Spring - White (1 ea.) CTS-W 77742 0.5
1 ESAC Cartridge Pole 60" SACPL-60/1500 77893 100.5 for belts 18"-30" (450-750 mm)
15b
CST Spring - Silver (1 ea.) CTS-S 77743 0.5
ESAC Cartridge Center Pole 60" (Dual) SACPL2-60/1500 77895 77.3 for belts 36"-48" (900-1200 mm)
ESAC Cartridge Center Pole 72" (Dual) SACPL2-72/1800 77896 89.5 CST Spring - Black (1 ea.)
15c CTS-B 77744 0.6
ESAC Cartridge Center Pole 96" (Dual) SACPL2-96/2400 77898 114.1 CST Spring - Gold (1 ea.)
15d CTS-G 77745 0.8
1a Extender Pole MHP-EP 76392 54.0 16

CST HD Torsion Pole Mount* (1 ea.) CSTHDPM 77869 16.4
(for use with Dual Cartridge Center Pole) (incl. 2 adjusting rods, 4 nuts)
ESAC Cartridge 24" CART-24/600 77900 3.5 17 CST Bushing Kit (includes 4 bushings) CSTBK 77037 0.1
ESAC Cartridge 30" CART-30/750 77901 4.3 18 Jam Nut Kit CST Tensioner JNK-E 79895 0.3
ESAC Cartridge 36" CART-36/900 77902 5.1 CST HD Cartridge Tensioner - White
ESAC Cartridge 42" CART-42/1050 77903 5.9 - (incl. 1 ea. item 14, 16, 17 and 2 ea. item 15a) CST1HD-W 77872 30.1
ESAC Cartridge 48" CART-48/1200 77904 6.7 for belts 18"-30" (450-750 mm)
ESAC Cartridge 54" CART-54/1350 77905 7.4 CST HD Cartridge Tensioner - Silver
- (incl. 1 ea. item 14, 16, 17 and 2 ea. item 15b) CST1HD-S 77873 30.1
2 ESAC Cartridge 60" CART-60/1500 77906 8.4 for belts 36"-48" (900-1200 mm)
ESAC Cartridge 72" CART-72/1800 77907 10.0 CST HD Cartridge Tensioner - Black
ESAC Cartridge 60" (Dual) CART2-60/1500 77908 8.6 - (includes 1 ea. item 14, 16, 17 and 2 ea. item 15c) CST1HD-B 77874 30.1
ESAC Cartridge 72" (Dual) CART2-72/1800 77909 10.2 for belts 54"-84" (1350-2100 mm)
ESAC Cartridge 84" (Dual) CART2-84/2100 77910 11.7 CST HD Cartridge Tensioner - Gold
ESAC Cartridge 96" (Dual) CART2-96/2400 77911 13.3 - (includes 1 ea. item 14, 16, 17 and 2 ea. item 15d) CST1HD-G 77875 30.7
ESAC Cartridge 120" (Dual) CART2-120/3000 77912 16.8 for belts 96"-120" (2400-3000 mm)
3 C-Tip* ICT6 74535 0.7 19 ESAC Removal Knuckle SACRKN 77882 3.2
3a V-Tip* (for vulcanized belts only) RSA150 73628 1.3 20 ESAC Removal Handle SACRH 77883 3.0
4 PowerFlex™ Cushion* PFC 75927 4.2 21 ESAC Handle Lock Plate SACRHL 77884 1.7
5a PowerFlex Front Shield PFS-ESAC 79073 .5 22 Knuckle Retainer Pin SACKRP 77885 0.2
5b PowerFlex Reversing Shield PFRS 76622 .4 23 SAC Hitch Pin SACHP2 77768 0.9
SST HD Mounting Base Kit* -
ESAC Removal Kit SACRKT 77886 9.0
6 (incl. 1 mounting base, 2 slide guides, top hat SSTHDMK 77870 10.2 (includes 1 ea. item 19, 20, 21, 22, 23)
bracket, & bottom bushing) 24 ESAC Chute Seal Kit SACSK 77052 3.9
SST Spring - White (1 ea.) 25 ESAC Chute Seal Replacement Cover SACSRC 77065 0.5
7 STS-W 75846 0.5
for belts 18"-30" (450-750 mm)
SST Spring - Silver (1 ea.) 26 ESAC Cartridge Tip Alignment Tool (Dual) SAC2-TIP-TL 77866 2.5
7a STS-S 75843 0.8 *Hardware Included
for belts 36"-48" (900-1200 mm)
SST Spring - Black (1 ea.)
7b
for belts 54"-84" (1350-2100 mm)
STS-B 75844 1.0
Legacy Replacement Parts for Tensioners
8 SST Hat Bracket (pair) SSTHB 79582 3.5
HD Torsion Pole Mount* (1 ea.) shipped prior to Dec. 31, 2014*
9 (includes adjusting rod, 3 nuts & sleeve) SSTHDPM 77868 15.0
SST Adj Rod Kit*
(See 9 & 9a for bushings)
L1 (incl. 1 rod, 2 nuts, 2 bushings, 1 washer) STAK 75847 2.9
10 SST Bushing Kit - White/Silver SSTBK-W 76636 0.1 for belts 18"-60" (450-1500 mm)
10a SST Bushing Kit - Black/Gold SSTBK-B 76637 0.1 SST HD Adj Rod Kit*
11 SST Lower Bushing Kit (pair) SSTLBK 79493 0.1 L2 (incl. 1 rod, 2 nuts, 2 HD bushings, 1 washer) STAKHD 75892 3.0
12 SST Slide Guide Kit STGK2 77867 1.1 for belts 72"-84" (1800-2100 mm)
13 Jam Nut Kit SST Tensioner JNK-C 79893 0.3 L3 Legacy SST Hat Channel Kit SSTHK 79070 1.5
SST HD Cartridge Tensioner - White
- (includes 1 ea. item 6, 7, 9, 10) SST1HD-W 77876 30.3 *Hardware Included
for belts 18"-30" (450-750 mm) *Verify if legacy parts are needed by looking
SST HD Cartridge Tensioner - Silver at threaded rod. If it has standard threads, use
- (includes 1 ea. item 6, 7a, 9, 10) SST1HD-S 77877 30.7 Standard Acme/trapezoidal
for belts 36"-48" (900-1200 mm) legacy parts. If it has flat/acme threads, choose thread profile thread profile
SST HD Cartridge Tensioner - Black from regular replacement parts.
- (includes 1 ea. item 6, 7b, 9, 10a) SST1HD-B 77878 31.0
for belts 54"-84" (1350-2100 mm)

Product Ordering U-Type®
Secondary Cleaner with UST Tensioner
Information (Mild Steel)
U-Type® with V-Blade (Tungsten Carbide)*

CLEANER COMPLETE REPLACEMENT V-BLADE
18 450 UTV18 76700 100.0 URVB18/450 76736 5.0
24 600 UTV24 76701 106.7 URVB24/600 76737 6.7
30 750 UTV30 76702 114.4 URVB30/750 76738 8.4
36 900 UTV36 76703 120.1 URVB36/900 76739 10.1
42 1050 UTV42 76704 126.7 URVB42/1050 76740 11.7
48 1200 UTV48 76705 134.5 URVB48/1200 76741 13.5
54 1350 UTV54 76706 141.0 URVB54/1350 76742 15.0
60 1500 UTV60 76707 148.8 URVB60/1500 76743 16.8
72 1800 UTV72 76708 225.2 URVB72/1800 76744 20.2
84 2100 UTV84 76709 241.5 URVB84/2100 76745 23.5
*NOTE: V-Blades (Tungsten Carbide) can be used on vulcanized belts and mechanically spliced belts ONLY
IF the splice is skived (recessed into the belt’s cover) (on solid plate splices the bolts must be ground).
CAUTION: The V-Blade CANNOT be used on belts with mechanical rip repair fasteners. Use the F-Blade.
U-Type® with C-Blade

(Impact-Resistant Tungsten Carbide)*
CLEANER COMPLETE REPLACEMENT C-BLADE
18 450 UTC18 76712 100.0 URCB18/450 76748 5.0
24 600 UTC24 76713 106.7 URCB24/600 76749 6.7
30 750 UTC30 76714 114.4 URCB30/750 76750 8.4
36 900 UTC36 76715 120.1 URCB36/900 76751 10.1
42 1050 UTC42 76716 126.7 URCB42/1050 76752 11.7
48 1200 UTC48 76717 134.5 URCB48/1200 76753 13.5
54 1350 UTC54 76718 141.0 URCB54/1350 76754 15.0
60 1500 UTC60 76719 148.8 URCB60/1500 76755 16.8
72 1800 UTC72 76720 225.2 URCB72/1800 76756 20.2
84 2100 UTC84 76721 241.5 URCB84/2100 76757 23.5
*NOTE: C-Blades can be used on Flexco® Solid Plate, mechanically fastened and vulcanized belts.
U-Type® with F-Blade (Polyurethane)*

CLEANER COMPLETE REPLACEMENT F-BLADE
18 450 UTF18 76724 98.0 UFB18 74448 3.0
24 600 UTF24 76725 104.0 UFB24 74449 4.0
30 750 UTF30 76726 111.0 UFB30 74450 5.0
36 900 UTF36 76727 116.0 UFB36 74451 6.0
42 1050 UTF42 76728 122.0 UFB42 74452 7.0
48 1200 UTF48 76729 129.0 UFB48 74453 8.0
54 1350 UTF54 76730 135.0 UFB54 74454 9.0
60 1500 UTF60 76731 142.0 UFB60 74455 10.0
72 1800 UTF72 76732 217.0 UFB72 74456 12.0
84 2100 UTF84 76733 232.0 UFB84 74460 14.0
*NOTE: F-Blades (Polyurethane) can be used on mechanically spliced belts and vulcanized belts.
Product Ordering Stainless Steel U-Type®
Secondary Cleaner
Information with J-Bolt Tensioner
U-Type® Stainless w/ V-Blade (Tungsten Carbide)*

CLEANER COMPLETE REPLACEMENT V-BLADE
18 450 UTV450J-S/S 77259 90.0 URVB18/450 76736 5.0
24 600 UTV600J-S/S 77260 96.7 URVB24/600 76737 6.7
30 750 UTV750J-S/S 77261 104.4 URVB30/750 76738 8.4
36 900 UTV900J-S/S 77262 110.1 URVB36/900 76739 10.1
42 1050 UTV1050J-S/S 77263 116.7 URVB42/1050 76740 11.7
48 1200 UTV1200J-S/S 77264 124.5 URVB48/1200 76741 13.5
54 1350 UTV1350J-S/S 77265 131.0 URVB54/1350 76742 15.0
60 1500 UTV1500J-S/S 77267 138.8 URVB60/1500 76743 16.8
72 1800 UTV1800J-S/S 77269 188.2 URVB72/1800 76744 20.2
84 2100 UTV2100J-S/S 77271 204.5 URVB84/2100 76745 23.5
*NOTE: V-Blades (Tungsten Carbide) can be used on vulcanized belts and mechanically spliced belts ONLY
IF the splice is skived (recessed into the belt’s cover) (on solid plate splices the bolts must be ground).
CAUTION: The V-Blade CANNOT be used on belts with mechanical rip repair fasteners.
For C-Blade or F-Blade cleaners, call for special quote.
304 grade stainless steel

Specifications U-Type ®
Secondary Cleaner
& Guidelines

Overall Pole Length
MAXIMUM
CLEANER SIZE POLE LENGTH CONVEYOR SPAN Maximum Conveyor Span
18 450 64 1600 54 1350
24 600 70 1750 60 1500
30 750 76 1900 66 1650
36 900 82 2050 72 1800
42 1050 88 2200 78 1950
48 1200 94 2350 84 2100
54 1350 100 2500 90 2250
60 1500 106 2650 96 2400
72 1800 124 3100 114 2850 Spring Length Chart
(For Cleaners with UST Tensioners)
84 2100 136 3400 126 3150
ADJUSTING BLADE WIDTH PURPLE SPRING SILVER SPRING WHITE SPRING
Pole Diameter - 18" to 60" cleaners: 2-3/8" (60mm)
Pole Diameter - 72" to 84" cleaners: 2-7/8" (75mm) NUTS in. mm in. mm in. mm in. mm
18 450 6 1/8 154 6 3/8 160 6 3/8 162
24 600 5 7/8 148 6 1/4 158 6 1/4 159
Top of 30 750 5 1/2 140 6 1/8 154 6 1/4 159
washer 36 900 5 3/8 136 6 152 6 1/8 156
Clearance Guidelines to top of 42 1050 5 128 5 7/8 150 6 1/8 156
For Installation torque arm 48 1200 N/A N/A 5 3/4 146 6 152
Cleaner Clearance Requirements 54 1350 N/A N/A 5 5/8 142 5 7/8 149
60 1500 N/A N/A 5 1/2 140 5 7/8 149
U Cleaner Size Clearance
72 1800 N/A N/A N/A N/A 5 1/2 140
in. mm in. mm
18" 450 6 155 84 2100 N/A N/A N/A N/A 5 3/8 138
24" 600 7 180
30" 750 8 205
36" 900 8 205
42" 1050 9 1/4 235
48" 1200 10 1/2 270
54" 1350 10 3/4 275
60" 1500 10 3/4 275
72" 1800 10 3/4 275
84" 2100 10 3/4 275
96" 2400 10 3/4 275
Spring Tensioner Guidelines
(For Cleaners with J-Bolt Tensioners)
5"
• Spring gap = .030" (.7mm)
(125mm)
* Gauge provided Gauge
CLEARANCE
Specifications:
• Maximum Belt Speed......................................1300 FPM (6.6m/s); F-Blade - 1000 FPM (5m/s)
• Usable Blade Wear Length............................V-Blade and C-Blade - 3/8" (9mm); F-Blade - 1 3/4" (44mm)
• Available for Belt Widths................................18" to 84" (450 to 2100mm). Other sizes available upon request.
Replacement U-Type®
Secondary Cleaner with UST Tensioner
Parts List
For replacement blades
see page 118. 7a 9
4 7
1
10a
10
13 13a
Replacement Parts - Poles
ORDERING ITEM WT. 2
REF DESCRIPTION NUMBER CODE LBS. 2a
18" (450mm) Pole USP18/450 76772 45.0
24" (600mm) Pole USP24/600 76773 50.0 11
11a
30" (750mm) Pole USP30/750 76774 56.0 11b
36" (900mm) Pole USP36/900 76775 60.0 6
42" (1050mm) Pole USP42/1050 76776 65.0 6a 12
1 3 8
48" (1200mm) Pole USP48/1200 76777 71.0 12a
14 5 3a
54" (1350mm) Pole USP54/1350 76778 76.0
14a 5a
60" (1500mm) Pole USP60/1500 76779 82.0
72" (1800mm) Pole USP72/1800 76780 125.0 UST Spring Tensioner
84" (2100mm) Pole USP84/2100 76781 138.0
Replacement Parts - UST Tensioner
ORDERING ITEM WT.
16 REF DESCRIPTION NUMBER CODE LBS.
21a 2 Torque Arm Kit* (1 ea.) †∆ ESTAK-EST 76406 3.6
21 15 2a Torque Arm Kit HD* (1 ea.)§ PSTA 75896 11.4
17a 3 Pivot Shaft Bracket Kit* (1 ea.) †∆ UPSBK 76784 1.7
20 17 NOTE: For 0.00 pricing, 3a Pivot Shaft Bracket Kit HD* (1 ea.)§ QMTPSBK 76099 4.3
please contact 4 Pivot Block Kit* (1 ea.) †∆ UPBK 76785 1.0
18a the Chile office for 5 Pivot Rod Kit* (1 ea.) †∆ ESPRK 76409 1.2
18 quotation.
5a Pivot Rod Kit HD* (1 ea.)§ QMTPAK 76096 4.3
6 Bushing Kit (incl. 2 bushings) †∆ ESBK-PS 76410 0.1
6a Bushing Kit HD (incl. 2 bushings)§ QMTBK-W 76098 0.1
7 Standard Pole Bearing (1 ea.) †∆ USPB2 79206 0.1
7a HD Pole Bearing (1 ea.)§ UHPB2 79207 0.2
19 8 Adjusting Bolt Kit (1 ea.) (incl. locknut) ABU 76788 0.2
9 Mounting Bracket Kit* (1 ea.) UMBK 76789 9.7
For use in changing UST Spring 10 Slide Plate Kit* (1 ea.) †∆ USPK 76790 4.6
Tensioner to a J-Bolt Tensioner
10a HD Slide Plate Kit* (1 ea.)§ UHSPK 76791 5.2
Replacement Parts - J-bolt Tensioner 11 Tension Spring - Purple (1 ea.) † QMTS-P 75845 0.6
ORDERING ITEM WT. 11a Tension Spring - Silver (1 ea.) ∆ ESS-S 76412 1.2
REF DESCRIPTION NUMBER CODE LBS. 11b Tension Spring - White (1 ea.)§ PSTS-W 75898 1.7
15 J-Bolt (incl. locknut & washer) STJK 74417 0.7 12 UST Stop Collar Retrofit Kit* †∆ USTSCK 79202 5.0
16 J-Bolt Mount (1 ea.) STJM 74775 3.0 12a HD UST Stop Collar Retrofit Kit* § USTSCKHD 79204 7.4
17 Tension Spring (1 ea.) † STTS 74419 1.4 13 Stop Collar* USTSC 79299 1.5
17a HD Tension Spring (1 ea.)§ HDTS 74502 2.0
13a HD Stop Collar* USTSCHD 79300 2.0
18 Stop Collar † USTSC 79299 1.5
14 Jam Nut Kit UST JNK-F 79896 0.3
18a HD Stop Collar§ USTSCHD 79300 2.0
19 Adjusting Bolt Kit (1 ea.) (incl. locknut) ABU 76788 0.2 14a Jam Nut Kit USTHD JNK-C 79893 0.3
20 Mounting Bracket Kit* (1 ea.) UMBK 76789 9.7 UST Spring Tensioner* - Purple †
– UST-P 76794 25.0
21 Slide Plate Kit* (1 ea.) †∆ USPK 76790 4.6 (incl. 1 ea. items 2, 3, 4, 5, 6, 8, 9, 10, 11)
21a HD Slide Plate Kit* (1 ea.)§ UHSPK 76791 5.2 UST Spring Tensioner* - Silver ∆
– UST-S 77757 25.0
J-Bolt Conversion Kit † (Optional) (incl. 1 ea. items 2, 3, 4, 5, 6, 8, 9, 10, 11a)
— UBTK 76977 4.7
(incl. 2 ea. items 15, 16, 17, 18) HD UST Spring Tensioner* - White§
HD J-Bolt Conversion Kit§ (Optional) – UST-W 76795 40.0
— UHDBTK 76978 5.2 (incl. 1 ea. items 2a, 3a, 4, 5a, 6a, 8, 9, 10a, 11b)
(incl. 2 ea. items 15, 16, 17a, 18a)
Standard Mounting Kit*
Standard Mounting Kit*
— (incl. 1 ea. items 8, 9, 10) † ∆ USMK 76792 14.6 – (incl. 1 ea. items 8, 9, 10) † ∆ USMK 76792 14.6
(for blade widths 18"- 60" (450 - 1500mm) (for blade widths 18"- 60" (450 - 1500mm)
HD Mounting Kit* HD Mounting Kit*
— (incl. 1 ea. items 8, 9, 10a)§ UHMK 76793 15.5 – (incl. 1 ea. items 8, 9, 10a)§ UHMK 76793 15.5
(for blade widths 72"- 84" (1800 - 2100mm) (for blade widths 72"- 84" (1800 - 2100mm)
18-60" J-Bolt Complete Tension Kit *Hardware included
— MMKU 77324 19.3
(incl. 2 ea. 15, 16, 17, 18, 19, 20, 21)†
64" + J-Bolt Complete Tension Kit † Standard components for blade widths 18"-42" (450-1050mm)
— MMKUHD 77327 20.7 ∆ Standard components for blade widths 48"-60" (1200-1500mm)
(incl. 2 ea. 15a, 16, 17a, 18a, 19, 20, 21a)§
§ HD components for blade widths 72"-84" (1800-2100mm)

Replacement Stainless Steel U-Type®
Secondary Cleaner
Parts List with J-Bolt Tensioner
5a
5
7a
7
3
For replacement
2
blades see page 118.
1
U-Type Stainless Replacement Parts
®
ORDERING ITEM WT.

18" (450mm) Pole USP18/450-S/S 77339 45.0
4a
4
24" (600mm) Pole USP24/600-S/S 77340 50.0
30" (750mm) Pole USP30/750-S/S 77341 56.0 8
36" (900mm) Pole USP36/900-S/S 77342 60.0 9 8a
1
42" (1050mm) Pole USP42/1050-S/S 77343 65.0 9a 6
48" (1200mm) Pole USP48/1200-S/S 77344 71.0
54" (1350mm) Pole USP54/1350-S/S 77345 76.0
60" (1500mm) Pole USP60/1500-S/S 77347 82.0
72" (1800mm) Pole USP72/1800-S/S 77349 125.0
84" (2100mm) Pole USP84/2100-S/S 77351 138.0
2 J-Bolt Kit* (incl. locknut and washer) STJK-S/S 77334 0.7
3 J-Bolt Mount (1 ea.) STJM-S/S 77332 3.0
4 18 - 60" Tension Spring (1 ea.) STTS-S/S 75585 1.0
4a 64"+ Tension Spring (1 ea.) HDTS-S/S 75586 1.5
5 18 - 60" Mounting Bracket Kit (incl. R & L) USMK-S/S-M 82885 16.0
5a 64"+ Mounting Bracket Kit (incl. R & L) USMKHD-S/S-M 82886 19.0
6 Adjusting Bolt Kit (incl. locknut) ABU 76788 1.0
7 18 - 60" UHMW Bearing (1 ea.) USPB2 79206 1.0
7a 64"+ UHMW Bearing (1 ea.) UHPB2 79207 1.0
8 18 - 60" Stop Collar* (1 ea.) UPL-S/S-MT 82810 2.0
8a 64"+ Stop Collar* (1 ea.) UPLHD-S/S-MT 82811 2.0
9 18 - 60" Adjusting Arm* (1 ea.) HARK-S/S 77364 2.0
9a 64"+ Adjusting Arm* (1 ea.) HDARK-S/S 77331 2.0
18 - 60" Mounting Kit*
- MMKU-S/S 77357 40.0
(incl. 2 ea. items 2, 3, 4, 5, 6, 7, 8, & 9)
64"+ Mounting Kit*
- MMKUHD-S/S 77358 43.0
(incl. 2 ea. items 2, 3, 4a, 5a, 6, 7a, 8a, & 9a)
*Hardware included
NOTE: For 0.00 pricing, please

contact the Chile office for quotation.
Product Ordering MDWS
Secondary Cleaner
Information DryWipe for Removing Water
MDWS Secondary Belt Cleaner
24 600 MDWS-24 75868 115.1
30 750 MDWS-30 75869 122.8
36 900 MDWS-36 75870 127.8
42 1050 MDWS-42 75871 138.3
48 1200 MDWS-48 75872 146.8
54 1350 MDWS-54 75873 154.5
60 1500 MDWS-60 75874 162.2
72 1800 MDWS-72 75875 177.7
84 2100 MDWS-84 76806 193.2
96 2400 MDWS-96 79063 208.7
MDWS Secondary Belt Cleaner

with SAT2 Tensioner
24 600 MDWS-24P 78745 115.1
30 750 MDWS-30P 78746 122.8
36 900 MDWS-36P 78747 127.8
42 1050 MDWS-42P 78748 138.3
48 1200 MDWS-48P 78749 146.8
54 1350 MDWS-54P 78750 154.5
60 1500 MDWS-60P 78751 162.2
72 1800 MDWS-72P 78752 177.7
84 2100 MDWS-84P 78753 193.2
96 2400 MDWS-96P 79064 208.7
Replacement ConShear™ DW Blades

(Color Identification: Black)
24 600 CDWB24 75884 12.8
30 750 CDWB30 75885 15.5
36 900 CDWB36 75886 18.3
42 1050 CDWB42 75887 21.0
48 1200 CDWB48 75888 23.8
54 1350 CDWB54 75889 26.5
60 1500 CDWB60 75890 29.2
72 1800 CDWB72 75891 34.7
84 2100 CDWB84 76942 40.5
96 2400 CDWB96 79062 46.3
Actual blade width is belt width + 4".
ConShear DW Blades are black for easy identification.
Product Notes:
• The ConShear™ “DryWipe” (DW) Blade is excellent for removing water from the belt. Use as the final cleaner in a
cleaning system.
• Actual blade width is belt width plus 4" (100mm). The extra length ensures the water is removed from the belt.
• Pole Length: Belt width plus 60" (1500mm) for cleaners up to 60" (1500mm), belt width plus 54" (1350mm) for cleaners over
60" (1500mm). For longer requirements, see Accessories - Pole Extender Kit (page 131).
• Visual Blade Tension Check: Measure the tension spring and refer to the Spring Length Chart on mounting base for the
correct length for best cleaning performance.

Information
Air Tanks
ORDERING ITEM WT.
NUMBER CODE LBS.
PAT1 78684 13.0
PAT2 78685 13.0
1
ORDERING ITEM WT.
2 PATHK 78794 1.5
Product Notes:

PATHK* 78794 1.5 PANK* 78799 5.0
*incl. 10' hose, 1' poly spiral wrap, 2 *incl. Nitrogen Regulator, 10' hose, 2
hose clamps hose clamps
Specifications MDWS
Secondary Cleaner
& Guidelines DryWipe for Removing Water

MAXIMUM
CLEANER SIZE BLADE WIDTH POLE LENGTH CONVEYOR SPAN
Overall Pole Length
24 600 28 700 84 2100 68 1700
30 750 34 850 90 2250 74 1850
36 900 40 1000 96 2400 80 2000
42 1050 46 1150 102 2550 86 2150
48 1200 52 1300 108 2700 92 2300
54 1350 58 1450 114 2850 98 2450
60 1500 64 1600 120 3000 104 2600
72 1800 76 1900 126 3150 116 2900
84 2100 88 2200 138 3450 128 3200
96" 2400 100 2500 150 3750 140 3500
*For special extra long pole length requirements, a Pole Extender Kit (#76024) is available
that provides 30" (750mm) of extended pole length. (page 131).
for Installation
CLEARANCE CLEARANCE
REQUIRED REQUIRED
in. mm in. mm
4 100 10 250

with SST Spring Tensioner PAT Pressure Chart
BLADE WHITE SILVER BLACK GOLD BLADE WIDTH PSI
WIDTH SPRING SPRING SPRING SPRING 18" 15#
24" 3 1/8" 3 7/8" N/A N/A
Top of Washer to 24" 19#
30" 2 7/8" 3 3/4" N/A N/A
Mounting Base 30" 23#
36" N/A 3 3/4" 3 7/8" N/A
36" 27#
42" N/A 3 5/8" 3 3/4" N/A
42" 31#
48" N/A 3 1/2" 3 5/8" N/A
48" 35#
54" N/A 3 3/8" 3 5/8" N/A
60" N/A 3 1/4" 3 1/2" N/A 54" 39#
72" N/A N/A 3 3/8" 3 5/8" 60" 43#
84" N/A N/A 3" 3 1/2" 72" 51#
96" N/A N/A N/A 3 3/8" 84" 59#
108" N/A N/A N/A 3 1/2" 96" 67#
120" N/A N/A N/A 3 3/8"
Specifications:
• Maximum Belt Speed................................................... 1000 FPM (5m/s)
• Temperature Rating...................................................... -30°F to 180°F (-35°C to 82°C)
• Usable Blade Wear Length......................................... 4-1/2" (113mm)
• Blade Height.................................................................. 7-1/4" (185mm)
• Blade............................................................................... Polyurethane with UHMW additive (softer durometer to squeegee water off
and additive to enhance blade life)
• Available for Belt Widths............................................. 24" to 96" (600 to 2400 mm). Other sizes available upon request.
• CEMA Cleaner Rating................................................... Class 4

Replacement MDWS
Secondary Cleaner
Parts List DryWipe for Removing Water
8 8a 10
For cleaners/tensioners
For replacement blades shipped before Dec. 31, 2014
see page page 123. ONLY*.
L1 L2
3 3a 3b
6 L3
Replacement Parts
ORDERING ITEM WT. 9
24" (600mm) Pole MSPP30 75804 46.0 1
30" (750mm) Pole MSPP36 75805 50.5 2
36" (900mm) Pole MSPP42 75806 55.5
42" (1050mm) Pole MSPP48 75807 60.0 7
48" (1200mm) Pole MSPP54 75808 64.0 14
1
54" (1350mm) Pole MSPP60 75809 67.0 4
60" (1500mm) Pole MSPP66 76695 76.0
72" (1800mm) Pole DWP-72 75883 90.0 13
84" (2100mm) Pole DWP-84 76815 100.0
96 (2400mm) Pole DWP-96 79060 110.0
2 Blade Pin Kit* (1 ea.) MSPBPK 75831 0.1
Tension Spring - White (1 ea.) 15
3 for belts 18" - 30" (450-750mm)
STS-W 75846 0.5
Tension Spring - Silver (1 ea.) L4
3a STS-S 75843 0.8 16
for belts 36" - 60" (900-1500mm)
3b Tension Spring - Black (1 ea.) STS-B 75844 1.0

for belts 72" - 84" (1800-2100mm)
3c Tension Spring - Gold (1 ea.) STS-G 78142 1.3

HD Torsion Pole Mount* (1 ea.) 17
4 (includes adjusting rod, 3 nuts & sleeve) SSTHDPM 77868 15.0
(See 8 & 8a for bushings) 18 PAT Control Box
SST HD Mounting Base Kit*
5 (includes 1 mounting base, 2 slide guides, top SSTHDMK 77870 10.2
hat bracket & bottom bushing) 11 12
6 SST Hat Bracket (pair) SSTHB 79582 3.5 NOTE: For 0.00 pricing, please
7 SST Slide Guide Kit* (incl. 2 slide guides) STGK2 77867 1.1 contact the Chile office for quotation.
8 SST Bushing Kit - White/Silver SSTBK-W 76636 0.1
SST Bushing Kit - Black/Gold
Secondary Air Tensioner 2
8a SSTBK-B 76637 0.1
(includes 2 bushings) Replacement Parts
9 SST Lower Bushing Kit (pair) SSTLBK 79493 0.1
10 Jam Nut Kit SST Tensioner JNK-C 79893 0.3 ORDERING ITEM WT.
HD Spring Tensioner* - White REF DESCRIPTION NUMBER CODE LBS.
– includes 2 each items 3, 4, 5 & 8) SST2HD-W 77879 60.6 11 SAT2 w/PAT Control Box SAT2PAT 78735 43.5
for belts 18" - 30" (450-750mm)
12 SAT2 w/o Control Box SAT2NCB 78703 41.0
HD Spring Tensioner* - Silver
– (includes 2 each items 3a, 4, 5 & 8) SST2HD-S 77880 61.4 13 SAT Air/Water Bag Kit SATB 76083 5.1
for belts 36" - 60" (900-1500mm) 14 SAT 1/8" Hose Barb Kit SATHB 76084 0.1
HD Spring Tensioner* - Black
– (includes 2 each items 3b, 4, 5 & 8a) SST2HD-B 77881 62.0 15 SAT2 Mounting Base Kit SAT2MK 78704 11.6
for belts 72" - 84" (1800-2100mm) 16 ST Slide Guide Kit STGK2 77867 1.1
HD Spring Tensioner* - Gold SAT2 Torsion Pole Mount
– (includes 2 each items 3c, 4, 5 & 8a) SST2HD-G 79041 62.6 17 SAT2PM 78732 11.1
(incl. threaded rods & 6 nuts)
*Hardware Included 18 PAT Control Box 100psi PACB100 79656 11.0
Legacy Replacement Parts for Tensioners

shipped prior to Dec. 31, 2014*
77879 77880 77881 79041
Adjusting Rod Kit
L1 (includes 1 rod, 2 nuts, 1 bushing, 1 washer) STAK 75847 2.9 CLEANER SIZE SST2HD-W SST2HD-S SST2HD-B SST2HD-G
for belts 24" - 60" (600-1500mm) MDWS 24" - 30"
HD Adjusting Rod Kit X
(600 - 750 mm)
L2 (includes 1 rod, 2 nuts, 1 HD bushing, 1 washer) STAKHD 75892 3.0
MDWS 36" - 60"
for belts 72"-84" (1800-2100mm) X
L3 Legacy SST Hat Channel Kit SSTHK 79070 1.5 (900 - 1500 mm)
L4 SAT2 Adjusting Rod Kit SAT2AK 78733 5.0 MDWS 72" - 84"
X
SST Tensioner Bushing Update Kit (1800 - 2100 mm)
– (includes 2 lower bushings, 2 sleeves, 2 nuts)
SST-BUK 76943 0.3 MDWS 96" (2400 mm) X
*See note on page page 117 to verify if legacy parts are needed. U.S. Patent No. D482,508S
Product Ordering Motorized Brush Cleaner
Information
Motorized Brush Cleaner
with 208-230/460VAC 3-Phase Motor
18 450 MBC-18 79494 136.7
24 600 MBC-24 79495 146.5
30 750 MBC-30 79496 150.2
36 900 MBC-36 79497 156.5
42 1050 MBC-42 79498 162.6
48 1200 MBC-48 79499 179.0
54 1350 MBC-54 79500 185.9
60 1500 MBC-60 79501 192.0
72 1800 MBC-72 79502 205.1
84 2100 MBC-84 79503 217.5

with 575V 3-Phase Motor
18 450 MBC-18-575V 79914 136.7
24 600 MBC-24-575V 79915 146.5
30 750 MBC-30-575V 79916 150.2
36 900 MBC-36-575V 79917 156.5
42 1050 MBC-42-575V 79918 162.6
48 1200 MBC-48-575V 79919 179.0
54 1350 MBC-54-575V 79920 185.9
60 1500 MBC-60-575V 79921 192.0
72 1800 MBC-72-575V 79922 205.1
84 2100 MBC-84-575V 79923 217.5
Replacement Brushes
18 450 MBRD-18 79514 9.6
24 600 MBRD-24 79515 13.5
30 750 MBRD-30 79516 17.1
36 900 MBRD-36 79517 20.5
42 1050 MBRD-42 79518 23.7
48 1200 MBRD-48 79519 26.8 Optional Mounting Brackets (Pair)
54 1350 MBRD-54 79520 30.7
ORDERING ITEM WT.
60 1500 MBRD-60 79521 33.9
NUMBER CODE LBS.
72 1800 MBRD-72 79522 41.0
MBCDBK 79536 28.9
84 2100 MBRD-84 79523 47.5
Product Notes:
• Spins opposite the belt direction for optimal cleaning.
• Uniquely patterned bristles aid in reducing material buildup and clogging.
• Adjustable tensioners allow easy brush-to-belt adjustment as the bristles wear.
• Works on mechanically spliced or vulcanized belts.

Specifications Motorized Brush Cleaner
& Guidelines
Specifications
Up to 700 fpm
Belt Speed
(3.5m/s)
Vertical and Horizontal
12" (305mm)
Clearance
-20ºF to 180ºF
Temperature Range
(-30ºC to 82ºC)
Maximum Chevron or
1/2" (13mm)
Cleat Height
Bristle Length 3-1/4" (83mm)
Overall Diameter 12" (305mm)
Shaft Length Belt Width plus 42" (1067mm)
Shaft Diameter 1-1/2" (38mm) 12" (
300m
208-230/460VAC 3 Phase* m)
1 HP (cleaners 18-42" 5-1/2
(450-1050mm) (140 "
2 HP (cleaners 48-84" mm)
Motor Voltage (1200-2100mm)
and HP Options 575V 3 Phase*
1 HP (cleaners 18-36"
(450-900mm)
2 HP (cleaners 42-84"
(1050-2100mm)
CEMA Cleaner Rating Class 4
*Other motors available upon request
2 HP
1-1/
2" (3
8mm
)
1 HP 9-5/
(2448"
m m)
19-1
/2" (
495
mm m)
9-5/ ) 8m
(2448" 7" (17
m m)
18-1
/2" (
470 m) Shaft Measurements
mm 8m
)
7" (17 Bearing Stops
Keyed End
5.62"
20" (143mm)
(508mm) 1.5" Dia
(38mm) 8.44"
(214mm)
Belt Width +42"
(1067mm)
Product Notes:
• Spins opposite the belt direction for optimal cleaning.
• Uniquely patterned bristles aid in reducing material buildup and clogging.
• Adjustable tensioners allow easy brush-to-belt adjustment as the bristles wear.
• Works on mechanically spliced or vulcanized belts.
Replacement Motorized Brush Cleaner
Parts
3
5 2
6
Replacement Parts
ORDERING ITEM WT.
9 7a
18" (450mm) Brush Drum Shaft MBDS-18 79504 24.6
11 7b
24" (600mm) Brush Drum Shaft MBDS-24 79505 27.6 12
30" (750mm) Brush Drum Shaft MBDS-30 79506 30.6 7c
7d
1
18" (450mm) Replacement Brush Drum MBRD-18 79514 9.6
2
8
3 Brush Mounting Base* (1) MBCMK 79524 4.7
4 Brush Bearing Clamp* (1) MBCBC 79525 1.9
10
5 Brush Cleaner Bearings (2) MBCB 79526 7.2
6 Brush Bearing Mount* (1) MBCBM 79528 9.7
Gearmotor Assy, 1 HP
7a MBCM-1 79529 55.0
for belts up to 42" (1050mm)
Gearmotor Assy, 2 HP
7b MBCM-2 79530 65.0
for belts 48" (1200mm) and up
Gearmotor Assy, 1 HP 575V
7c MBCM-575-1 79924 55.0
for belts up to 36" (900mm)
Gearmotor Assy, 2 HP 575V
7d MBCM-575-2 79925 65.0
for belts 42" (1050mm) and up
13
8 Brush Cleaner Torque Arm* (1) MBCTA 79531 2.5
9 Brush Locks* (2) MBCBL 79532 9.4
10 Brush Motor Key Kit (1) MBCMKK 79533 0.3
11 MBC Shaft End Cap* (1) MBCEC 79534 0.1
12 Tensioner Lock Pins (2) STLP 79535 0.2
13 Brush Cleaner Drop Brackets* (2) MBCDBK 79536 28.9
Brush Cleaner Adjusting Bracket (1)
- MBADB 79527 18.1
(incl. bearing and 1 ea. items 3,4,6,&12
*Hardware Included

Product Ordering Chevron
Belt Cleaner
Information
Chevron Belt Cleaner
BELT WIDTH DRUM WIDTH ORDERING ITEM WT.
18 450 18 450 CBC18 76668 74.0
24 600 24 600 CBC24 76669 81.9
30 750 30 750 CBC30 76670 90.8
36 900 36 900 CBC36 76671 99.7
42 1050 42 1050 CBC42 76672 107.5
48 1200 48 1200 CBC48 76673 116.5
54 1350 54 1350 CBC54 76674 124.3
60 1500 60 1500 CBC60 76675 133.2
72 1800 72 1800 CBC72 90762 150.0
84 2100 84 2100 CBC84 90763 166.8
Replacement Parts
ORDERING ITEM WT.
REF DESCRIPTION NUMBER CODE LBS. 5
18" (450mm) Drum Shaft CBCS18 90537 15.1 1
24" (600mm) Drum Shaft CBCS24 90538 17.0 2
30" (750mm) Drum Shaft CBCS30 90539 18.9
1
3
2 Chevron Pillow Block* CPB 76692 1.2
18" (450mm) Repl Drum w/Fingers* CRDF18 90631 25.0 6
24" (600mm) Repl Drum w/Fingers* CRDF24 90632 31.0
4
42" (1050mm) Repl Drum w/Fingers* CRDF42 90635 51.0 Specifications
3
48" (1200mm) Repl Drum w/Fingers* CRDF48 90636 58.0 Up to 500 fpm
Belt Speed
54" (1350mm) Repl Drum w/Fingers* CRDF54 90637 64.0 (2.5m/s)
Vertical and
60" (1500mm) Repl Drum w/Fingers* CRDF60 90638 71.0 10" (250mm)
Horizontal Clearance
72" (1800mm) Repl Drum w/Fingers* CRDF72 90639 84.0 -30ºF to 180ºF
84" (2100mm) Repl Drum w/Fingers* CRDF84 90640 97.0 Temperature Range
(-35ºC to 82ºC)
4 3" (75mm) Replacement Finger Ring CBC3R 90641 2.5 Maximum Chevron or
1" (25mm)
Mounting Bracket Kit Cleat Height
5 EZS2MBK 75666 13.0
(1 Right and 1 Left) Finger Length 2" (50mm)
6 Adjusting Bracket Kit* (1 ea.) PAB 75513 1.5 Rubber Durometer 45A
Overall Diameter 9-1/2" (238mm)
*Hardware Included
Belt Width plus
Shaft Length
30" (750mm)
Product Notes: Shaft 1" (25mm) Hex
• Free-rotating. Works only when the belt is running. CEMA Cleaner Rating Class 3
• Self-cleaning. Finger length, spacing and the rotary action allows carryback to fall
free instead of clogging.
• Easy to install. Few parts and step-by-step instructions make the job simple.
• Long-wearing SBR rubber. Drum life ranges from 1 to 3 years depending upon the
application conditions and the material being conveyed.
• Works on reversing belts.
• Finger rings can be replaced individually or all at once by replacing the drum.
Optional Installation Accessories
Mounting Kits
OPTIONAL MOUNTING KITS FOR BELT CLEANERS
Versatile, adjustable brackets and plates that can be mounted on the conveyor structure so
precleaners and secondary cleaners can be easily and quickly bolted into place.
75830 76537
Optional Mounting Bar Kit Mounting Plate Kit (incl. 2 plates, 16" x 32"
(with bolts, nuts and washers) (400 x 800 mm))
• For mounting precleaners on open head pulleys. • For use with Mounting Bars to mount
• Weld on both sides of pulley and bolt on steel plates. cleaners on open head pulleys.
• For use with MSP, MMP, MHP, MHCP. • For use with MSP, MMP, MHP, MHCP.
76071 76072 76073

Standard Mounting Long Mounting Optional Top Angle Kit
Bracket Kit Bracket Kit • Used with both
• For MHS/MDWS • For installations standard and long
secondary cleaner installs. that require extra mounting bracket kits
length legs. for additional mounting
options.
79434 79536
MST Drop Bracket Kit Brush Cleaner Drop
• For installs of Bracket Kit
secondary cleaners • For brush cleaner
with MST tensioners. installations that require 79844 & 79850
extra length legs. Y-Type SD & HD Drop Bracket Kits
• For Y-Type cleaner installations
Optional Mounting Kits that require extra length legs.
(includes 2 brackets/bars)
ORDERING ITEM WT.
Standard Mounting Bracket Kit* SSTSMB 76071 34.3 Specs and Notes:
Long Mounting Bracket Kit* SSTLMB 76072 43.5 • Standard brackets are 13" W x 15-1/2" L (330x394mm).
Optional Top Angle Kit* SSTOTA 76073 10.5 • Long brackets are 13" W x 21-1/2" L (330x546mm).
Optional Mounting Bar Kit* MMBK 75830 19.5 • Mounting bars are 1-1/2" W x 16" L (38x400mm) with
Mounting Plate Kit (incl. 2 plates) MMPK 76537 140.0
(4) 5/8-11 tapped holes.
MST Drop Brackets (2) MSTDB 79434 27.7
• Mounting plates are 16" W x 32" L (400x800mm) with
Brush Cleaner Drop Brackets (2) MBCDBK 79536 28.9
(4) 5/8" (16mm) holes.
Y-Type Standard Duty Drop Brackets (2) YSTDBK 79844 19.7
Y-Type Heavy Duty Drop Brackets (2) YSTHDDBK 79850 32.1
*Hardware Included
Pole Extender Kit 77423 76024

(includes 2 pole extenders) 2-3/8" Pole Extender Kit 2-7/8" Pole Extender Kit
ORDERING ITEM WT.
2-7/8" (73mm) Pole Extender Kit MAPEK 76024 21.9
2-3/8" (60mm) Pole Extender Kit RAPEK 77423 18.0
Provides 30" (750mm) of extended pole length.

Product Ordering Spring Tensioner
Information Accessories
Spring Cover
Spring Covers Selection Chart
ORDERING ITEM WT. SPRING COVER
NUMBER CODE LBS. TENSIONER REQ'D
SPG-CVR-A 77387 0.3 EST-P 77387
SPG-CVR-B 77388 0.3 EST-S 77387
SPG-CVR-C 77389 0.3 EST-B 77388
SPG-CVR-D 77390 0.4 QMT-P 77389
SPG-CVR-E 77391 0.4 QMT-W 77390
QMT-G 77391
SPG-CVR-F 77392 0.3
QMT-S 77391
SPG-CVR-G 77393 0.3
PST-R 77391
SPG-CVR-H 77741 0.3
PST-W 77390
Includes 1 spring cover PST-S 77390
SST-W 77392
SST-S 77392
SST-B 77393
SST-G 77392
UST-P 77387
UST-S 77387
UST-W 77390
Spring cover on Spring cover on
CST-W 77741
Precleaner tensioner Secondary cleaner
CST-S 77741
tensioner
CST-B 77741
CST-G 77741
Tensioner Lock*
Designed to prevent tampering or
unauthorized retensioning of the cleaner.
ORDERING ITEM WT.
NUMBER CODE LBS.
TEN-LOCK-KIT 77443 0.4 Insert padlock
*For MSP, MMP, MHP, MHCP, H-Type Precleaners or cable tie
and MSS, MHS, MDWS Secondary Cleaners
Includes 1 tensioner lock
Tensioner Lock (Precleaner

tensioner shown)
Patent pending
Product Ordering Inspection Door
Information
Inspection Doors
ORDERING ITEM WT.
DESCRIPTION
NUMBER CODE LBS.
Inspection Door 12 x 12 (300x300mm)* INDR-1212 79303 19.2
Inspection Door w/Screen 12 x 12 (300x300mm)* INDR-1212S 79307 21.2

*Hardware included
1d
1c
1b
1a
Replacement Parts
ORDERING ITEM WT.
REF DESCRIPTION
NUMBER CODE LBS.
1a Inspection Door Screen 12 x 12 (300x300mm)* IDSC-1212 79311 1.9
1b Inspection Door Screen 12 x 18 (300x450mm)* IDSC-1218 79312 2.5
1c Inspection Door Screen 18 x 24 (450x600mm)* IDSC-1824 79313 4.4
1d Inspection Door Screen 24 x 24 (600x600mm)* IDSC-2424 79314 5.5
2 Replacement Seal - 5’ (1.5M)** IDSEAL 79315 0.1
3 Replacement Hinge IDHINGE 79316 0.2
4 Replacement Latch (incl. bolt, bushings & nut) IDLATCH 79317 2.5
*Hardware included
**One 5’ length of seal is needed for 12x12" and 12x18" doors or screens, and two 5’ lengths are needed for 18x24"
and 24x24" doors or screens. Double if replacing seal on both door and screen.

Specifications Inspection Door
& Guidelines
Inspection Door Specifications

W
Door (Opening) Size Outer Dimensions
Width
(Width, Length) (Width, Length) Height
12 W x 12 L 300 W x 300 L 16-5/16 W x 15-3/4 L 415 W x 400 L 3-7/16 90
Opening L
L Size Length
12 W x 18 L 300 W x 450 L 16-5/16 W x 21 3/4 L 415 W x 555 L 3-7/16 90 Length
18 W x 24 L 450 W x 600 L 22-5/16 W x 27 3/4 L 570 W x 705 L 3-7/16 90
24 W x 24 L 600 W x 600 L 28-5/16 W x 27 3/4 L 720 W x 705 L 3-7/16 90
H W
Height Width
Screen (Optional)
Screen serves as a guard that helps keep hands and tools from being
placed into the chute/enclosure, but still allows visual access. Screen is
hinged on the same side as the door and bolted in place on the other side
so it does not require full removal for accessing the chute/enclosure. A
wrench is required to remove the bolt that holds the screen in place as a
safety feature. (Holes are sized per ANSI B11 and ISO 1819.)
Specifications:
Product Ordering Water Spray Pole Systems
Information
Spray Pole Kits*
Standard & Heavy-Duty
18 450 SPK18 74709 23.0
24 600 SPK24 74710 23.0
30 750 SPK30 74711 24.0
36 900 SPK36 74712 24.0
42 1050 SPK42 74713 25.5
Spray Pole
42 1050 SPKHD42 74952 26.5
48 1200 SPK48 74714 26.0
48 1200 SPKHD48 74953 27.0
54 1350 SPK54 74715 27.0
54 1350 SPKHD54 74954 28.0
60 1500 SPK60 74716 28.0
60 1500 SPKHD60 74955 29.0
72 1800 SPK72 74717 30.0
72 1800 SPKHD72 74718 32.0
84 2100 SPKHD84 74719 34.0
96 2400 SPKHD96 74720 36.0 Spray Pole Control Panel
120 3000 SPKHD120 74721 40.0
*Includes Spray Pole, Mounting Brackets, and 10' (3M) Hose.
Standard-duty is for use on P-Type®, R-Type®, U-Type® 18" - 60", and
EZS2 cleaners; Heavy-duty is for use on H-Type®, U-Type® 72" - 96",
and MSS, MHS, and MDWS cleaners.
Other sizes available upon request.
Replacement Parts Control Assembly

DESCRIPTION NUMBER CODE LBS. DESCRIPTION NUMBER CODE LBS.
Standard Spray Pole Mounting Kit SPMK2 75578 3.6 SP Control Panel with
HD Spray Pole Mounting Kit SPMK3 75579 3.7 Regulator, Strainer and SPCP 74734 16.5
SP Ball Valve SPBV 74742 0.6 Pressure Gauge
SP Y Strainer SPYS 74743 1.5
SP Pressure Regulator SPPR 74744 1.2
SP Hose 10 ft SPH10 74745 2.9
Spray Pole Nozzle SPN 74746 0.1
Spray Pole Gauge SPG 74747 0.5
SP SS Pipe Nipple SPPN 74748 0.1
Spray Nozzles Per Cleaner Size

in. 18 24 30 36 42 48 54 60 72 84 96 120
mm 450 600 750 900 1050 1200 1350 1500 1800 2100 2400 3000
Spray
1 2 2 3 3 4 4 5 6 7 8 10
Nozzles
Belt Specifications
• Stainless steel pole with powder coated steel clamping brackets.
• Spray nozzles are spaced on 12" (300mm) centers.
• Delivers .98 gallons (3.7 liters) per minute at 60 psi (414 kPa).
• Generally will affect moisture content of material by less than ½%.
Overlapping Spray Pattern • Maximum inlet pressure is 300 psi (2069 kPa).
• Typical pressure setting is 40-60 psi (276-414 kPa).

Product Ordering Stabilizing Roller Bracket Kit
Information
Stabilizing Roller Bracket Kit*

Provides universal brackets to mount the user’s return
roller as a hold-down (stabilizing) roller on top of the
return side belt. Holds the belt flat so the belt cleaner
can maximize its cleaning performance.
ORDERING ITEM WT.
Stabilizing Roller Bracket Kit SRBK 74941 34.0
*Works with most CEMA C and D rollers.
Stabilizing Roller Bracket Kit

(Roller supplied by end user)
Product Ordering Live-Shaft Hold-Down Roll
Information
Live-Shaft Hold-Down Roll
ROLL
BELT WIDTH DIAMETER
ORDERING ITEM WT.
in. mm in. mm NUMBER CODE LBS
24 600 4 1/2 114 HDR24 79010 159.0
30 750 4 1/2 114 HDR30 79011 169.0
36 900 4 1/2 114 HDR36 79012 180.0
42 1050 4 1/2 114 HDR42 79013 190.0
48 1200 4 1/2 114 HDR48 79014 249.0
54 1350 4 1/2 114 HDR54 79015 255.0
60 1500 4 1/2 114 HDR60 79016 265.0
72 1800 5 127 HDRS72* 79017 565.0
84 2100 5 127 HDRS84* 79018 615.0
Includes roller bracket kit
*72" and 84" feature solid roll
Replacement Roll Roller Bracket Kit*

ROLL ORDERING ITEM WT.
BELT WIDTH DIAMETER DESCRIPTION NUMBER CODE LBS
ORDERING ITEM WT.
in. mm in. mm NUMBER CODE LBS Hold Down Roll Bracket Kit - 24" to 60" HDRBK 79009 45.0
24 600 4 1/2 114 HDRR24 79019 114.0 HD Hold Down Roll Bracket Kit - 72" to 84" HDRBK-HD 79072 45.0
30 750 4 1/2 114 HDRR30 79020 124.0 *Includes Left and Right Bracket
36 900 4 1/2 114 HDRR36 79021 135.0
42 1050 4 1/2 114 HDRR42 79022 145.0
48 1200 4 1/2 114 HDRR48 79023 204.0 Add-On Grease Hose Extension Kit
54 1350 4 1/2 114 HDRR54 79024 210.0
ORDERING ITEM WT.
60 1500 4 1/2 114 HDRR60 79025 220.0 DESCRIPTION NUMBER CODE LBS
72 1800 5 127 HDRRS72* 79026 520.0 Grease Hose Extension Kit
HDRGEK 79236 1.0
84 2100 5 127 HDRRS84* 79027 570.0 incl. 2 ea. 16" hose w/fittings and tie-downs
*72" and 84" feature solid roll
Specifications:
• Overall Roll Length....................................Belt Width +6" (150mm)
• Overall Shaft Length.................................Belt Width +30" (750mm)
• Shaft Diameter..........................................24"- 42" (600-1050mm) - 1-15/16" diameter
48"- 60" (1200-1500mm) - 2-7/16" diameter
72"- 84" (1800-2100mm) - 2-15/16" diameter
• Shaft Construction....................................24"- 60" (600-1500mm) - 1045 CD
72"- 84" (1800-2100mm) - turned from solid 4140 round stock
Product Notes:
• For use in applications with belt cup or belt flap.
• By preventing these issues secondary cleaner performance and blade/tip life is enhanced.

Product Ordering Optional Installation Tools
Information
Tip Tension Scale

For easy checking of blade tension on all H-Type® Precleaners.
ORDERING ITEM WT.
H Tip Tension Scale HTTS 74141 0.1
Spring Tension Chart

H Protected Hi-Temp Tip Tension Scale
CLEANER HXF H V-Tip V-Tip V-Tip
Pounds 28# 18# 18# 18#
Kg 12.7 8.2 8.2 8.2
For installation and for retensioning blades during maintenance.
Cleaner Location Tool

Handy 2-in-1 tool for measuring and leveling during
cleaner installation.
ORDERING ITEM WT.
Location Tool ELT 74774 0.3 Cleaner Location Tool
Length - 24" (600mm)
Belt Cleaner Handy Wrench

A ratcheting wrench with 2 common socket sizes (11/16" & 3/4",
17mm & 19mm) for belt cleaner installation and maintenance.
ORDERING ITEM WT.
Belt Cleaner Handy Wrench
Belt Cleaner Handy Wrench HW-BC 74100 1.2
Product Ordering Old-Style H-Type® Cleaners
Legacy Belt Cleaner Parts
Information
3
14 13
Optional H Bolt
Tensioner Kit 10
11 11a
4
12
XF-Tip
8 8a
5 8b
2 2a
1
6
7 9
9a
H V-Tip and
Suspension Arm Optional SS Tip Shield H Protected V-Tip
Replacement Parts
18" (450mm) Pole HP-18 78990 23.0 8 H Polyshield HPS8 73050 0.5
24" (600mm) Pole HP-24 78991 27.0 8a H SS Cushion Shield HSSCS 74772 0.6
30" (750mm) Pole HP-30 78992 29.0 8b H SS Tip Shield HSSTS 74771 0.5
36" (900mm) Pole HP-36 78993 33.0 H Adjusting Arm Repair Kit*
9 HAR-K 78786 6.0
1 42" (1050mm) Pole HP-42 78994 43.0 (includes 1 adjusting arm)
48" (1200mm) Pole HP-48 78995 47.0 H HD Adjusting Arm Repair Kit*
9a HDARK 74550 8.0
(includes 1 adjusting arm)
54" (1350mm) Pole HP-54 78996 53.0
10 J-Bolt Kit* (includes 1 ea.) STJK 74417 0.7
60" (1500mm) Pole HP-60 78997 59.0
Tension Spring (includes 1 ea.)
72" (1800mm) Pole HP-72 78998 66.0 11 STTS 74419 1.4
for 18" (450mm)
2 H2 XF-Tip Cushion* (for HXF2 & HV Tips) HXFC2 75902 4.0 HD Tension Spring (includes 1 ea.)
H2 F-Tip Cushion* (for SS HXF2 & 11a HDTS 74502 2.0
for sizes 24" to 72" (600-1800mm)
2a HFC2 75901 4.0
SS HV Tips) 12 Pole Lock (includes 1 ea.) EZP1PL 75641 1.1
HXF2-Tip Extra Small* HXF2-SS 75979 3.0 13 Spring Tensioner J-Bolt Mount (incl. 1 ea.) STJM 74775 3.0
HXF2-Tip Small* HXF2-S 75980 3.4 H Mounting/J-Bolt Kit - Single
3
HXF2-Tip Medium* HXF2-M 75981 3.8 - (incl. 1 ea. items 9,10,11,12,13 and 2 ea. bracket/ H-MK1 78987 20.0
HXF2-Tip Large* HXF2-L 75982 4.1 bearing)
H XF-Tip Extra Small* HXF8SS 74307 3.4 H Mounting/J-Bolt Kit - Dual
- (incl. 2 ea. items 9,10,11,12,13 and bracket/ H-MK2 78801 24.4
H XF-Tip Small* HXF8S 74689 3.8 bearing)
4
H XF-Tip Medium* HXF8M 74690 4.1 Spring Tension Kit - Single
H XF-Tip Large* HXF8L 74691 4.5 - STKS 74505 6.8
(incl. 1 ea. items 10,11, & 13 and 2 ea. item 12)
5 H V-Tip (for vulcanized belts only) HVT8-S/S 75419 1.0 Spring Tension Kit - Dual
- STKD 74504 11.2
H SSS Suspension Arm* HSA8SSS 75565 0.4 (includes 2 ea. items 10,11,12 & 13)
H SS Suspension Arm* HSA8SS 73047 0.5 Spring Tension Kit HS - Single
- STKHSS 74313 8.0
(incl. 1 ea. items 10,11a, & 13 and 2 ea. item 12)
H S Suspension Arm* HSA8S 73048 1.0
6 Spring Tension Kit HS - Dual
H M Suspension Arm* HSA8M 73049 1.5 - STKHSD 74316 16.0
(includes 2 ea. items 10,11a,12 & 13)
H L Suspension Arm* HSA8L 73063 2.0 H Bolt Tensioner Kit
H LL Suspension Arm* HSA8LL 73064 2.5 14 HBTK 74776 0.5
(includes 2 adjusting bolts & 2 jam nuts)
H Protected V-Tip* (for vulcanized
7 HVPT 73631 2.7
belts only)
*Hardware included

Product Ordering I-Type™
Legacy Belt Cleaner Parts
Information
3
2
7
8
1
(Left Pole 5
5a
Clamp Kits) 6
(Old-Style Clamp
Blocks no longer (Right Pole 6a
available) Clamp Kits) 4
New Style Clamp Block

I-Type™ Replacement Parts
ORDERING ITEM WT.
18" (450mm) Pole EZS2P18 75652 25.0
24" (600mm) Pole EZS2P24 75653 28.0
30" (750mm) Pole EZS2P30 75654 30.0
36" (900mm) Pole EZS2P36 75655 34.0
1 42" (1050mm) Pole EZS2P42 75656 36.0
48" (1200mm) Pole EZS2P48 75657 39.0
54" (1350mm) Pole EZS2P54 75658 42.0
60" (1500mm) Pole EZS2P60 75659 77.0
72" (1800mm) Pole EZS2P72 75660 89.0
2 I Standard Cushion* ISC 74534 2.1
I C-Tip* (for mechanically spliced
3 ICT6 74535 0.7
and vulcanized belts)
Adjusting Bracket Kit
4 PAB 75513 1.5
Pole Clamp Kit LEFT* (1 ea.) (incl. item 7)
5 CCKL 79224 6.8
(for sizes 18"-54" (450-1350mm)
HD Pole Clamp Kit LEFT* (1 ea.) (incl. item 7a)
5a CCKHDL 79225 8.7
for sizes 60"-72" (1500-1800mm)
Pole Clamp Kit RIGHT* (1 ea.) (incl. item 7)
6 CCKR 79228 6.8
for sizes 18"-54" (450-1350mm)
HD Pole Clamp Kit RIGHT* (1 ea.) (incl. item 7a)
6a CCKHDR 79229 8.7
for sizes 60"-72" (1500-1800mm)
Cradle Clamp Top Strap (1 ea.)
7 CCKTS 79232 1.1
for use on L or R Pole Clamp Kit
HD Cradle Clamp Top Strap (1 ea.)
7a CCKHDTS 79233 1.7
for use on L or R HD Pole Clamp Kit
8 EZS2MBK 75666 13.0
– for sizes 18"-54" (450-1350mm) CCMK 78919 33.0
(incl. 1 ea. Items 5, 6, & 8, 2 ea. Items 4 & 7)
HD Cradle Clamp Mounting Kit*
– for sizes 60"-72" (1500-1800mm) CCMKHD 78920 36.7
(incl. 1 ea. Items 5a, 6a, & 8, 2 ea. Items 4 & 7a)
*Hardware included.
Part Number ConShear™ Replacement Blades
for OEM Belt Cleaners
Cross-Reference Guide
ConShear™ Blade Technology

The patented polyurethane blade design that delivers a conforming and shearing action
to provide consistent belt cleaning.
• Faceted Profile - the blade forms a new cleaning edge each time the blade wears
down to a new faceted section.
• Long Wearing - a proprietary polyurethane blend that provides up to 30% more
wear life than conventional solid blades.
• Material Path Option - choose the blade size that spans just the material path on the
belt. This minimizes differential wear between the ends and the center of the blade.
It allows the blade to conform better to the belt for more cleaning power. See page
142 for more information.
• Replacement Indicator - a molded-in wear line provides easy visual notice when the
blade is worn out and needs to be replaced.
• Quick, Easy Change-Out - simply pull one pin, remove the worn blade, insert the
new blade and replace the pin.
For best cleaning and wear life results the ConShear blade must be located against
the conveyor head pulley in the correct position and must be tensioned properly.
See page 142 for proper blade installation and tensioning instructions.

Installation and ConShear™ Replacement Blades
for OEM Belt Cleaners
Tensioning Tips
For optimal cleaning efficiency and long wear life, the ConShear™ blade must be located and tensioned correctly on the belt
head pulley. If the OEM cleaner pole is in the wrong location the performance of the new blade may be adversely affected. See
“Possible Problems” below. For tensioning, please follow these instructions. Our recommended tensioning may be as much
as 2 times more than the OEM recommendation, but the added tension is needed to take full advantage of the ConShear Blade
Technology.
Correct Location:
Correct Location: 1/8" (3mm) gap at
When blade contact is made against the head pulley (prior to tensioning) there should initial blade/belt
be a 1/16" (1.5mm) to 1/8" (3mm) gap at the bottom of the blade face (Fig. 1). contact
Fig. 1
Possible Problems:
• Pole location too far out - The initial blade/belt contact Tip pushed away
gap will be larger than 1/8" (3mm)(Fig. 2). If the blade is from belt
correctly tensioned it may flip through before it is fully worn. Incorrect:
Larger than Incorrect:
If tensioned too lightly, it will develop the “smile effect”
1/8" (3mm) gap no gap
quickly and not clean properly.
• Pole location too far in - If there is no gap at the initial
blade/belt contact (Fig. 3), the tip of the blade may not be
touching the belt. In this case, the blade will push away Fig. 2 Fig. 3
and lose its shearing (cleaning) effect. The blade may also
develop a flap at the tip which may trap material.
Correct Tension:
Full contact
Correct Tensioning: between blade
The blade should be tensioned until the gap is gone (Fig. 4). face and belt
Fig. 4
The “Material Path” Option

For optimal cleaning and reduced blade retensioning, the cleaner blade width should be sized to fit the material path of the belt.
The material path is typically the center 2/3 of the belt width. Choosing a blade only slightly wider than the material path can
decrease differential blade wear which reduces blade retensioning maintenance, as well as reducing the frequency of blade
replacement.

Belt Width Minus 50mm (2") Belt Width Minus 200mm (8") Belt Width Minus 350mm (14")
Material Path Material Path Material Path
Belt Width Belt Width Belt Width
Blade Width Blade Width Blade Width
Part Number Cross-Reference for Replacement
Cross-Reference Guide and of Martin QC #1 Standard Blades ® ®
Martin Pit Viper Standard Blades ® ™
ACTUAL MARTIN® MARTIN®
BELT BLADE QC #1® PIT VIPER™ ORDERING CONSHEAR™ WT.
WIDTH LENGTH PART NUMBER PART NUMBER NUMBER ITEM CODE LBS.
12" 10" 32773-1211 PV121110OR CRB10 75628 4.6
18" 16" 32773-1811 PV181116OR CRB16 75629 7.3
24" 22" 32773-2411 PV241122OR CRB22 75630 10.1
30" 28" 32773-3011 PV301128OR CRB28 75631 12.8
36" 34" 32773-3611 PV361134OR CRB34 75632 15.5
42" 40" 32773-4211 PV421140OR CRB40 75633 18.3
48" 46" 32773-4811 PV481146OR CRB46 75634 21.0
54" 52" 32773-5411 PV541152OR CRB52 75635 23.8
60" 58" 32773-6011 PV601158OR CRB58 75636 26.5
72" 70" 32773-7211 PV721170OR CRB70 75773 32.0
Additional blade sizes are available upon request. Call for pricing.
NOTE: Blade coverage is 2 inches less than belt width.
NOTE: Also works on Baker-Bohnert Yellow Jacket™ Primary Cleaners.
Replacement Blade Pin

ORDERING ITEM WT. Martin® Pit Viper™
NUMBER CODE LBS. (sand and gravel)
EZP1BP 75642 0.1
Specifications
SLOT POLE PLATE CONSHEAR QC#1
WIDTH THICKNESS BLADE HEIGHT BLADE HEIGHT
7/16" 5/16" 7-1/4" 6-3/4"
Usable Blade Volume Comparison

Usable
BLADE BLADE AREA Usable
BLADE TYPE LENGTH (cross-section) BLADE VOLUME
Martin® QC® #1
Martin® QC™ #1 28" 3.00 in2 84.0 in3
Martin® Pit Viper™ 28" 4.20 in2 117.6 in3
ConShear™ 28" 5.50 in2 154.0 in3
ConShear Blade Design Martin QC#1 Standard Blade Design Martin Pit Viper Blade Design
7-1/4" 6-3/4"
5-3/8"
7/16" 7/16" 7/16"

ConShear™ is a trademark of Flexible Steel Lacing Company.
Martin® and QC® #1 are registered trademarks, and Pit Viper™ is a trademark of Martin Engineering, Neponset, IL.
Yellow Jacket™ is a trademark of Baker-Bohnert, Louisville, KY

of Martin QC #1 Heavy-Duty Blades ® ®
ACTUAL
BELT BLADE MARTIN® ORDERING CONSHEAR™ WT.
WIDTH LENGTH PART NUMBER NUMBER ITEM CODE LBS.
18" 12" 35381-1811 RBQC1HD-12 75985 5.5
24" 18" 35381-2411 RBQC1HD-18 75986 8.3
30" 24" 35381-3011 RBQC1HD-24 75987 11.0
36" 30" 35381-3611 RBQC1HD-30 75988 13.8
42" 36" 35381-4211 RBQC1HD-36 75989 16.6
48" 42" 35381-4811 RBQC1HD-42 75990 19.3
54" 48" 35381-5411 RBQC1HD-48 75991 22.1
60" 54" 35381-6011 RBQC1HD-54 75992 24.8
72" 66" 35381-7211 RBQC1HD-66 75993 30.4

ORDERING ITEM WT.
NUMBER CODE LBS.
RB38BP 79481 0.2
Specifications
SLOT POLE PLATE CONSHEAR QC#1HD
Martin® QC® #1 Heavy-Duty
9/16" 1/2" 7-1/4" 7-1/4"

Usable
BLADE BLADE AREA Usable BLADE
BLADE TYPE LENGTH (cross-section) VOLUME
Martin® QC™ #1 HD 28" 6.65 in2 186.2 in3
ConShear™ 28" 5.50 in2 154.0 in3
ConShear Blade Design Martin QC#1HD Blade Design
7-1/4" 7-1/4"
9/16" 9/16"

of Martin QB #1 Blades ® ®
ACTUAL
BELT BLADE MARTIN® ORDERING CONSHEAR™ WT.
18" 16" 39344-181116OR RBQB1-16/400 90935 7.3
18" 39344-241118OR RBQB1-18/450 90936 8.2
24"
22" 39344-241122OR RBQB1-22/550 90937 10.1
24" 39344-301124OR RBQB1-24/600 90938 11.0
30"
28" 39344-301128OR RBQB1-28/700 90939 12.8
30" 39344-361130OR RBQB1-30/750 90940 13.7
36"
34" 39344-361134OR RBQB1-34/850 90941 15.5
36" 39344-421136OR RBQB1-36/900 90942 16.5
42"
40" 39344-421140OR RBQB1-40/1000 90943 18.3
42 39344-481142OR RBQB1-42/1050 90944 19.2
48"
46 39344-481146OR RBQB1-46/1150 90945 21.0
48 39344-541148OR RBQB1-48/1200 90946 21.9
54"
52 39344-541152OR RBQB1-52/1300 90947 23.8
54 39344-601154OR RBQB1-54/1350 90948 24.7
60"
58 39344-601158OR RBQB1-58/1450 90949 26.5 Replacement Blade Clamp
66" 60 39344-661160OR RBQB1-60/1500 90950 27.4 ORDERING ITEM WT.
64 39344-721164OR RBQB1-64/1600 90951 29.2 NUMBER CODE LBS.
72"
70 39344-721170OR RBQB1-70/1750 90952 32.0 QB1PCK 90954 4.8
78" 72 39344-781172OR RBQB1-72/1800 90953 32.9
Specifications ConShear
SLOT CONSHEAR QB#1 Blade
WIDTH BLADE HEIGHT BLADE HEIGHT
3/4" 7-1/4" 6-1/2" Blade
Clamp

ConShear Retrofit
Usable Usable
for Martin® QB® #1
BLADE BLADE AREA BLADE
Martin® QB™ #1 28" 5.75 in2 161.0 in3
ConShear™ 28" 5.50 in2 154.0 in3
ConShear Blade Design
7-1/4"
3/4"

Martin® and QB® #1 are registered trademarks of Martin Engineering, Neponset, IL.

Cross-Reference Guide of Martin QC Extra Heavy-Duty Blades
® ®
BELT WIDTH BLADE WIDTH MARTIN QC
XHD PART ORDERING ITEM WT.
in. mm in. mm NUMBER NUMBER CODE LBS.
24 600 18 450 35897-2411 TRB18 76485 21.0
30 750 24 600 35897-3011 TRB24 76486 28.0
36 900 30 750 35897-3611 TRB30 76487 35.0
42 1050 36 900 35897-4211 TRB36 76488 42.0
48 1200 42 1050 35897-4811 TRB42 76489 49.0
54 1350 48 1200 35897-5411 TRB48 76490 56.0
60 1500 54 1350 35897-6011 TRB54 76491 63.0
66 1650 60 1500 35897-6611 TRB60 76492 70.0
72 1800 66 1650 35897-7211 TRB66 76493 77.0
78 1950 72 1800 35897-7811 TRB72 76494 87.0
84 2100 78 1950 35897-8411 TRB78 76697 91.0
90 2250 84 2100 35897-9011 TRB84 77047 98.0
96 2400 90 2250 35897-9611 TRB90 77048 105.0

ORDERING ITEM WT.
NUMBER CODE LBS.
MMPBPK 76466 0.8
Specifications
SLOT POLE PLATE TUFFSHEAR QC XHD
13/16" 3/4" 10-1/8" (257mm) 12-3/8" (314mm) Martin® QC® Extra Heavy-Duty

Usable
Martin® QC™ XHD 30" 17.01 in2 510.3 in3
TuffShear™ 30" 12.08 in2 362.7 in3
TuffShear Blade Design Martin QC XHD Blade Design
10-1/8"
12-3/8"
(257mm)
(314mm)
13/16" 13/16"
TuffShear™ is a trademark of Flexible Steel Lacing Company.
Cross-Reference Guide of Arch-Gordon Saber Primary Blades
®
ACTUAL
BELT BLADE ARCH/GORDON ORDERING CONSHEAR™ WT.
18" 16" MRBSB000180000 RBAGS-16 75995 7.3
18" 18" MRBSB00018F000 RBAGS-18 76967 8.2
24" 22" MRBSB000240000 RBAGS-22 75996 10.1
24" 24" MRBSB00024F000 RBAGS-24 76968 11.0
30" 28" MRBSB000300000 RBAGS-28 75997 12.8
30" 30" MRBSB00030F000 RBAGS-30 76969 13.7
36" 34" MRBSB000360000 RBAGS-34 75998 15.5
36" 36" MRBSB00036F000 RBAGS-36 76970 16.5
42" 40" MRBSB000420000 RBAGS-40 75999 18.3 Arch/Gordon Saber®
42" 42" MRBSB00042F000 RBAGS-42 76971 19.2
48" 46" MRBSB000480000 RBAGS-46 76028 21.0
48" 48" MRBSB00048F000 RBAGS-48 76972 21.9
54" 52" MRBSB000540000 RBAGS-52 76029 23.8
54" 54" MRBSB00054F000 RBAGS-54 76973 24.7
60" 58" MRBSB000600000 RBAGS-58 76030 26.5
60" 60" MRBSB00060F000 RBAGS-60 76974 27.4
72" 70" MRBSB000720000 RBAGS-70 76031 32.0
72" 72" MRBSB00072F000 RBAGS-72 76975 32.9
84" 84" MRBSB00084F000 RBAGS-84 76976 38.4
NOTE: Also works on Falcon Primary Cleaners (Canada).
Replacement Blade Pin ConShear-LS for Arch/Gordon Mini-Saber Blades

ORDERING ITEM WT. BELT BLADE
NUMBER CODE LBS. WIDTH WIDTH ARCH/GORDON ORDERING CONSHEAR-LS WT.
EZP1BP 75642 0.1 in. mm in. mm PART NUMBER NUMBER ITEM CODE LBS.
18 450 16 400 MRBMN00018 RBAGM-16 77106 3.3
24 600 22 550 MRBMN00024 RBAGM-22 77107 4.6
30 750 28 700 MRBMN00030 RBAGM-28 77108 5.8
36 900 34 850 MRBMN00036 RBAGM-34 77109 7.1
42 1050 40 1000 MRBMN00042 RBAGM-40 77110 8.3
48 1200 46 1150 MRBMN00048 RBAGM-46 77111 9.6
Additional sizes are available upon request. Call for pricing.
ConShear Blade Design Arch/Gordon Saber Blade Design Specifications

SLOT POLE PLATE CONSHEAR SABER
7/16" 3/8" 7-1/4" 5-7/8"
5-7/8" Usable Blade Volume Comparison

7-1/4"
Usable Usable
Arch/Gordon Saber® 28" 3.06 in2 85.7 in3
7/16" 7/16" ConShear™ 28" 5.50 in2 154.0 in3

Saber® is a registered trademark of Arch Environmental Equipment Inc., Paducah, KY.

of Arch/Gordon Saber (SCM) ™
Cross-Reference Guide Channel Mount Blades
ACTUAL ARCH/GORDON
BELT BLADE ARCH/GORDON OLD PART ORDERING CONSHEAR™ WT.
WIDTH LENGTH PART NUMBER NUMBER NUMBER ITEM CODE LBS.
18" 16" MRBCM00018 SCM-016-18 RBAGSCM-16 76572 7.3

ORDERING ITEM WT.
NUMBER CODE LBS.
EZP1BP 75642 0.1
Specifications
BASE CONSHEAR CHANNEL MOUNT
WIDTH BLADE HEIGHT BLADE HEIGHT Arch/Gordon Saber® Channel Mount
1-7/16" 7-1/4" 5-3/4"

Usable
Arch/Gordon Saber®
28" 3.06 in2 85.7 in3
Channel Mount
ConShear™ 28" 5.50 in2 154.0 in3
ConShear Blade Design Arch/Gordon Saber Channel Mount

Blade Design
7-1/4" 5-3/4"
1"
1"
1-7/16" 1-7/16"

Saber® is a registered trademark of Arch Environmental Equipment Inc., Paducah, KY.
of Superior Exterra Blades ®
ACTUAL SUPERIOR
BELT BLADE EXTERRA® ORDERING CONSHEAR™ WT.
12" 10" 07-00540 RBSE-10 79861 4.6
18" 16" 07-00541 RBSE-16 79862 7.3
24" 22" 07-00542 RBSE-22 79863 10.1
30" 28" 07-00543 RBSE-28 79864 12.8
36" 34" 07-00544 RBSE-34 79865 15.5
42" 40" 07-00545 RBSE-40 79866 18.3
48" 46" 07-00546 RBSE-46 79867 21.0
54" 52" 07-00547 RBSE-52 79868 23.8
60" 58" 07-00549 RBSE-58 79869 26.5
66" 64" 07-00548 RBSE-64 79870 29.3
72" 70" 07-00550 RBSE-70 79871 32.0
Specifications Superior Exterra®

SLOT POLE PLATE CONSHEAR EXTERRA
7/16" 3/8" 7-1/4" 6-11/16"
ConShear Blade Design Superior Exterra Blade Design
7-1/4" 6-11/16"
7/16" 7/16"

Exterra® is a registered trademark of Superior Industries, Inc. Morris, MN

Cross-Reference Guide of ASGCO Skalper III and IV Blades*
® ®
ACTUAL
BELT BLADE ASGCO® ORDERING CONSHEAR™ WT.
18" 18" ASG-SK4-18A RBAS4-18 76032 8.3
24" 24" ASG-SK4-24A RBAS4-24 76033 11.0
30" 30" ASG-SK4-30A RBAS4-30 76034 13.8
36" 36" ASG-SK4-36A RBAS4-36 76035 16.6
42" 42" ASG-SK4-42A RBAS4-42 76036 19.3
48" 48" ASG-SK4-48A RBAS4-48 76037 22.1
54" 54" ASG-SK4-54A RBAS4-54 76038 24.8
60" 60" ASG-SK4-60A RBAS4-60 76039 27.6
72" 72" ASG-SK4-72A RBAS4-72 76040 33.1
NOTE: Blade coverage is the same as the belt width.
Blade design is identical to Argonics replacement blade, except for length. Can be interchanged.
*Also interchangeable with ASGCO® Skalper® III Blades.

ORDERING ITEM WT.
NUMBER CODE LBS.
RB38BP 79481 0.2
Specifications
SLOT POLE PLATE CONSHEAR SKALPER
9/16" 1/2" 7-1/4" 6-5/8"

Usable BLADE
BLADE AREA (cross- Usable
BLADE TYPE LENGTH section) BLADE VOLUME
ASGCO® Skalper® IV 28" 3.29 in2 92.1 in3 ASGCO® Skalper® IV
ConShear™ 28" 5.50 in2 154.0 in3
ConShear Blade Design ASGCO Skalper IV Blade Design
6-5/8"
7-1/4"
9/16"
9/16"

ASGCO® and Skalper® are registered trademarks of ASGCO Mfg, Inc., Allentown, PA.
of Argonics Raptor Blades ™ ™
ACTUAL
BELT BLADE ARGONICS ORDERING CONSHEAR™ WT.
12" 10" CP-RE-10-G83 RBAER-10 76041 4.6
18" 16" CP-RE-16-G83 RBAER-16 76042 7.3
24" 22" CP-RE-22-G83 RBAER-22 76043 10.1
30" 28" CP-RE-28-G83 RBAER-28 76044 12.8
36" 34" CP-RE-34-G83 RBAER-34 76045 15.5
42" 40" CP-RE-40-G83 RBAER-40 76046 18.3
46" 44" CP-RE-44-G83 RBAER-44 76655 20.1
48" 46" CP-RE-46-G83 RBAER-46 76047 21.0
54" 52" CP-RE-52-G83 RBAER-52 76048 23.8
60" 58" CP-RE-58-G83 RBAER-58 76049 26.5
72" 70" CP-RE-70-G83 RBAER-70 76050 32.0
NOTE: Blade coverage is 2 inches less than the belt width.
Blade design is identical to ASGCO replacement blade, except for length. Can be interchanged.

ORDERING ITEM WT.
NUMBER CODE LBS.
RB38BP 79481 0.2
Specifications
SLOT POLE PLATE CONSHEAR RAPTOR
WIDTH THICKNESS BLADE HEIGHT BLADE HEIGHT Argonics Eraser™
9/16" 1/2" 7-1/4" 7-1/4"

Usable
Argonics™ Raptor™ 28" 4.25 in2 119.0 in3
ConShear™ 28" 5.50 in2 154.0 in3
ConShear Blade Design Argonics Raptor Blade Design
7-1/4" 7-1/4"
9/16" 9/16"

Eraser™ and Raptor™ are registered trademarks of Argonics, Inc., Marquette, MI.

Cross-Reference Guide of Stephens-Adamson Metso/Trellex Blades
ACTUAL
BLADE SA PART ORDERING CONSHEAR™ WT.
LENGTH NUMBER NUMBER ITEM CODE LBS.
6" ABC90 RB6SA 76570 3.1
Blades fit into cartridge that mounts on the pole.
Cleaner Blades Required Per Belt Width

in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
Blades
2 3 4 5 6 7 8 9 11
Required
Specifications
BASE BASE CONSHEAR S-A
WIDTH HEIGHT BLADE HEIGHT BLADE HEIGHT S-A Precleaner
1.96" .78" 8" 8"

Usable
S-A Metso/Trellex 6" 3.88 in2 22.8 in3
ConShear™ 6" 5.50 in2 33.0 in3
ConShear Blade Design S-A Standard Blade Design
8" 8"
.78" .78"
5-7/8" 1.52" 5-7/8" 1.52"

1.96" 1.96"

Cross-Reference Guide of Martin Durt Hawg Precleaner Blades
® ®
ACTUAL
BLADE MARTIN® ORDERING CONSHEAR™ WT.
LENGTH PART NUMBER NUMBER ITEM CODE LBS.
6" 27987-C RB6DH 76571 3.3
Cleaner Blades Required Per Belt Width

in. 18 24 30 36 42 48 54 60 72
mm 450 600 750 900 1050 1200 1350 1500 1800
Blades
2 3 4 5 6 7 8 9 11
Required
Specifications
SLOT CONSHEAR DURT HAWG Martin® Durt Hawg®
WIDTH BLADE HEIGHT BLADE HEIGHT Precleaner
1/4" 8" 8 1/4"

Usable
Martin® Durt Hawg 6" 3.80 in2 22.2 in3
ConShear ™
6" 5.50 in 2
33.0 in3
ConShear Blade Design Martin Durt Hawg Blade Design
8" 8-1/4"
6" 1/4" 6" 1/4"

ConShear™ is a trademark of Flexible Steel Lacing Company. Martin® and
Durt Hawg® are registered trademarks of Martin Engineering, Neponset, IL.

of Martin Durt Tracker Precleaner Blades ® ®
Cross-Reference Guide SD 6
BLADE ORDERING ITEM WT.
WIDTH NUMBER CODE LBS.
6" (152mm) RBDT-6C 90614 3.2
Specifications
BLADE BLADE BLADE
TYPE WIDTH HEIGHT
SD 6 6" (152mm) 7 1/2" (190mm)
Martin® Durt Tracker®
Replacement Blade
Usable Blade Volume

Usable Usable
BLADE TYPE WIDTH (cross-section) VOLUME
Martin® Durt Tracker® SD 6 Retrofit Blade 6" (152mm) 3.7 in2 (.00239m2) 22.3 in3 (.00037m2)
Martin® Durt Tracker® SD 6 Retrofit Blade
7-1/2"
(190mm)
6"
(152mm)
Martin® and Durt Tracker® are registered trademarks of Martin Engineering, Neponset, IL.
of Martin Durt Tracker XHD Precleaner ® ®
Cross-Reference Guide Blades XHD 6.5 & XHD 13
BLADE ORDERING ITEM WT.
WIDTH NUMBER CODE LBS.
6.5" (165mm) RBDTXHD-6.5C 77517 6.5
13" (330mm) RBDTXHD-13C 90615 13.1
Specifications
BLADE BLADE BLADE Martin® Durt Tracker®
TYPE WIDTH HEIGHT XHD 6.5 Replacement Blade
XHD 6.5 6.5" (165mm)
9 1/2" (241mm)
XHD 13 13" (330mm)
Martin® Durt Tracker®

XHD 13 Replacement Blade
Usable Blade Volume

Usable Usable
BLADE TYPE WIDTH (cross-section) VOLUME
Martin® Durt Tracker® XHD 6.5 Retrofit Blade 6.5" (165mm) 78 in3 (.00128m3)
12.1 in2 (.00781m2)
Martin® Durt Tracker® XHD 13 Retrofit Blade 13" (330mm) 156 in3 (.00256m3)
Martin® Durt Tracker® XHD Retrofit Blade
9-1/2"
(241mm)
6.5" (165mm) XHD 6.5

13" (330mm) XHD 13
Martin® and Durt Tracker® are registered trademarks of Martin Engineering, Neponset, IL.

Product Ordering V-Plow
Information
V-Plow*
SIZE in. mm NUMBER CODE LBS.
Extra Small 18-24 450-600 CBV-XS 73131 53.0
Small 30-36 750-900 CBV-S 73132 65.0
Medium 42-48 1050-1200 CBV-M 73133 74.0
Large 54-60 1350-1500 CBV-L 73134 84.0
72" 72 1800 CBV-72 74389 150.0
84" 84 2100 CBV-84 74390 175.0
96" 96 2400 CBV-96 74391 200.0
*Use next larger size for belt widths between ranges.
Replacement Blade Kits**

Extra Small 18-24 450-600 VBK-XS 73190 4.5
Small 30-36 750-900 VBK-S 73191 6.0
Medium 42-48 1050-1200 VBK-M 73192 7.5
Large 54-60 1350-1500 VBK-L 73193 9.0
72" 72 1800 VBK-72 74457 13.0
84" 84 2100 VBK-84 74458 15.0
96" 96 2400 VBK-96 74459 17.0
**Kit includes blades and replacement blade bolts.
Optional Polyurethane Blade Kits**

Typically provides 3 to 5 times longer wear life.
Extra Small 18-24 450-600 VUBK-XS 75570 5.4
Small 30-36 750-900 VUBK-S 75571 8.0
Medium 42-48 1050-1200 VUBK-M 75572 10.5
Large 54-60 1350-1500 VUBK-L 75573 13.0
72" 72 1800 VUBK-72 75574 15.9
84" 84 2100 VUBK-84 75575 18.5
96" 96 2400 VUBK-96 75576 21.0
Product Notes:
• Exclusive blade design - 20° slant on leading edge spirals debris off the belt.
• Self-adjusting blade - the blade floats on the belt and self-adjusts as it wears.
• Unique blade adjuster - turnbuckle-type adjuster allows the blade to be accurately positioned to the belt.
• Easy to install - comes fully assembled and can be placed right into position on the conveyor.
Product Ordering Diagonal Plow
Information
Diagonal Plows*
Small 18-30 450-750 RDP1-S 74692 45.0
Medium 36-42 900-1050 RDP1-M 74693 56.0
Large 48-60 1200-1500 RDP1-L 74694 70.0
Extra Large 72-84 1800-2100 RDP1-XL 74695 96.0
*Use next larger size for belt widths between ranges.
Replacement Blade Kits**

Small 18-30 450-750 RDPBK-S 74699 4.0
Medium 36-42 900-1050 RDPBK-M 74700 5.6
Large 48-60 1200-1500 RDPBK-L 74701 8.4
Extra Large 72-84 1800-2100 RDPBK-XL 74702 12.0
**Kit includes blade and replacement blade bolts.
Product Notes:
• A belt cleaner for the tail pulley. Prevents damage to the belt, pulley, lagging, and belt splice.
• Keeps fugitive materials off the inside of the belt and out of the tail pulley.
• Installed at a 45° angle across the belt to discharge material to one predetermined side.
• The blade is installed in a fixed position, eliminating any bouncing problems.
• Exclusive 20° angled blade quickly spirals material off the belt.

Specifications V-Plow & Diagonal Plow
& Guidelines
V-Plow
Belt Width Specifications
BELT WIDTH
(Min-Max)
SIZE in. mm
Extra Small 18-24 450-600
Small 30-36 750-900
Medium 42-48 1050-1200
Large 54-60 1350-1500
72" 72 1800
84" 84 2100
96" 96 2400
Use next larger size for belt widths between
ranges.
Diagonal Plow
BELT WIDTH
(Min-Max)
SIZE in. mm
Small 18-30 450-750
Medium 36-42 900-1050
Large 48-60 1200-1500
Extra Large 72-84 1800-2100
Use next larger size for belt widths between
ranges.
Application Guidelines
• Belt Splice................................... Mechanically Fastened/Vulcanized
• Belt Speed................................... 1000 FPM (5m/s) for V-Plow; 700 FPM (3.5m/s) for Diagonal Plow
• Belt Direction.............................. One Way
V-Plow & Diagonal Plow

Blade Specifications
Material UHMWPE
Durometer 67-D
Working Temperature
°F -40° to 160°
°C -40° to 71°
Grease & Chemical
Excellent
Resistance
Sticky Material
Excellent
Performance
Replacement V-Plow & Diagonal Plow
Parts Lists
Replacement Parts - V-Plow
6 3 4 5 1
BELT WIDTH
(Min-Max) ORDERING ITEM WT.
REF DESCRIPTION in. mm NUMBER CODE LBS.
V-Plow Pole XS 18-24 450-600 VPXS 73400 13.0
V-Plow Pole S 30-36 750-900 VPS 73408 15.0
V-Plow Pole M 42-48 1050-1200 VPM 73409 18.0
1 V-Plow Pole L 54-60 1350-1500 VPL 73410 21.0
V-Plow Pole 72 72 1800 VP72 74395 24.0
V-Plow Pole 84 84 2100 VP84 74396 27.0
V-Plow Pole 96 96 2400 VP96 74397 30.0
V-Plow Mainframe XS 18-24 450-600 VMFXS 73535 12.0
V-Plow Mainframe S 30-36 750-900 VMFS 73549 15.0
2
V-Plow Mainframe M 42-48 1050-1200 VMFM 74037 22.0
2 V-Plow Mainframe L 54-60 1350-1500 VMFL 74038 28.0 8 7
V-Plow Mainframe 72 72 1800 VMF72 74398 35.0
3 VP Main Linkage Kit* (1 ea.) VMLK 74982 5.0
4 VP Center Sleeve VCS 73533 1.0
5 V-Plow Adjuster Kit* VAK 76416 0.5
6 VP Stop Collar* (1 ea.) VSC 74983 1.0
7 VP Mounting Bracket Kit* (1 ea.) VMBK 73399 5.0
REPLACEMENT BLADE KITS**
Replacement Blade Kit XS 18-24 450-600 VBK-XS 73190 4.5
Replacement Blade Kit S 30-36 750-900 VBK-S 73191 6.0
Replacement Blade Kit M 42-48 1050-1200 VBK-M 73192 7.5
8 Replacement Blade Kit L 54-60 1350-1500 VBK-L 73193 9.0
Replacement Blade Kit 72 72 1800 VBK-72 74457 13.0
*Hardware included
**Kit includes blades and replacement blade bolts. 1
Replacement Parts - Diagonal Plow

BELT WIDTH
(Min-Max) ORDERING ITEM WT. 3
Small Plow Frame 18-30 450-750 RDPF-S 75566 18.1 4
Medium Plow Frame 36-42 900-1050 RDPF-M 75567 26.3
1
Large Plow Frame 48-60 1200-1500 RDPF-L 75568 38.4
Extra Large Plow Frame 72-84 1800-2100 RDPF-XL 75569 60.7
2 Mounting Bracket Kit* (1 ea.) RDPMBK 74698 6.1
3 Mounting Shaft Kit* (1 ea.) RDPMSK 74705 3.6
REPLACEMENT BLADE KITS**
Small Plow Blade Kit 18-30 450-750 RDPBK-S 74699 4.0
Medium Plow Blade Kit 36-42 900-1050 RDPBK-M 74700 5.6
4
Large Plow Blade Kit 48-60 1200-1500 RDPBK-L 74701 8.4
Extra Large Plow Blade Kit 72-84 1800-2100 RDPBK-XL 74702 12.0
*Hardware included

Specifications Flexco Slider/Impact Beds
& Guidelines
Easy Solution for Load Zone Problems
• Complete load zone offering with slider beds through impact beds for up to 750 ft-lbs of force.
• No specifying trough angle; each bed is adjustable for 20°, 35° and 45° trough settings (ships at 35° setting).
• Low-profile installation. Because EZ Series beds feature trough wings that are adjustable, they lay flat during
installation, providing more clearance.
• Full UHMW slider bars included on outside bar to provide proper sealing and long life.
• Unique Impact Bar Supports protect the impact bars from damage, extending service life. An Anti-Migratory
Tab on each support secures the bar and prevents it from sliding in the direction of belt travel.
• All beds are manufactured for mounting holes belt width +9" (225mm), per CEMA. For wider structure,
contact Customer Service for special quote.
How to spec the correct slider/impact Roller Size and CEMA Rating
bed for your conveyor transfer point 5" (125mm) 6" (150mm)
CEMA C D E
Belt Width:
Bed Length: 4' (1.2M) 5' (1.5M)
Impact Energy Calculation Chart
Largest Material
Lump Weight (w)
Drop Height (h)

Impact Energy
Lump Weight (w)
Drop Height (h) x
Total = lb-ft See Below
0 lb-ft— EZSB-C
0 - 200 lb-ft— EZSB-I or EZIB-L
(25kg-m)
200 - 750 lb-ft— EZIB-M
(25-100 kg-m)
Product Ordering EZSB-C
Flexco Slider Beds
Information
Flexco Slider Bed

(for non-impact areas)
BELT WIDTH TONNAGE 4' (1.2M) LENGTH 5' (1.5M) LENGTH
RATING
ORDERING ITEM USD ORDERING ITEM WT.
(ton/hr)
in. mm NUMBER CODE PRICE NUMBER CODE LBS
24 600 – EZSB24-4C 78855 $ 2,407.65 EZSB24-5C 78863 261.1
30 750 – EZSB30-4C 78856 2,557.80 EZSB30-5C 78864 279.7
36 900 – EZSB36-4C 78857 2,707.95 EZSB36-5C 78865 305.5
42 1050 – EZSB42-4C 78858 3,130.05 EZSB42-5C 78866 382.9
48 1200 – EZSB48-4C 78859 3,490.20 EZSB48-5C 78867 410.4
54 1350 – EZSB54-4C 78860 3,972.15 EZSB54-5C 78868 488.0
60 1500 – EZSB60-4C 78861 4,393.20 EZSB60-5C 78869 511.6
72 1800 – EZSB72-4C 78862 0.00 EZSB72-5C 78870 545.9
Product Notes:
• CEMA D construction
• No need to specify troughing angle–designed to adjust to 20°, 35°, 45°.
• Designed for containment in the load zone, but not intended for impact zones.
• Slider bars are solid 1" (25mm) UHMW providing longer wear life and consistent load zone sealing.
• Product ships with two rollers. Additional rollers can be added by purchasing an EZRMK and the appropriate
corresponding roller.
Adjustable Idler Set
(for non-impact areas) (for placement in
between 3 or more beds or in transitions;
Adjusts from 10 - 45° in 5° increments)
24 600 EZAI-24 79000 79.9
30 750 EZAI-30 79001 90.0
36 900 EZAI-36 79002 100.7
42 1050 EZAI-42 79003 110.0
48 1200 EZAI-48 79004 123.3
54 1350 EZAI-54 79005 132.5
60 1500 EZAI-60 79006 141.3
72 1800 EZAI-72 79007 163.6
U.S. Patent pending

Specifications EZSB-C
Flexco Slider Beds
and Guidelines
DIM E
.69 2.00
17.5 50.8
DIM A
11.00
12.50 279.4
317.5
DIM C 8.00
203.2
DIM B
35°
DIM D Ø 6.00
5.54 152.4
140.7
20°
45°
Bed Length Bed Length

4’ (1.2 M) 5’ (1.5 M)
Dim A Dim B Dim A Dim B Bed Width Dim C Dim D Dim E
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
24 600 33 838 9 229 9 229
30 750 39 991 9 229 11 279
36 900 45 1143 9 229 13 330
42 1050 51 1295 9 229 15 381
26 660.4 48.82 1240 34 863.6 59.06 1500
48 1200 57 1448 9 229 17 432
54 1350 63 1600 9.25 235 19 483
60 1500 69 1753 9.25 235 21 533
72 1800 81 2057 9.5 241 25 635
Replacement EZSB-C
Flexco Slider Beds
Parts List
7
1
1a
4
6
3
2 Replacement Parts
ORDERING ITEM WT.
(hidden)
1 Slider Bar, 4' (1.2M) SB4 78789 20.0
1a Slider Bar, 5' (1.5M) SB5 78790 24.1
Bar Bolt Kit (incl. 1 ea. 5/8" (15mm)
2 carriage bolt, square washer, flat washer, IBBK 76928 0.5
lock washer, Nylock nut)
3 Slider Roll Mount Kit* EZRMK 78952 5.1
Roller 24" (600mm) N6D3T-24-9-A45 26107 9.1
Roller 30" (750mm) N6D3T-30-11-A45 26108 10.6
Shim Requirements Roller 36" (900mm) N6D3T-36-13-A45 26109 12.3
IMPACT BED CEMA C OR D, 5" (125mm) CEMA C OR D, 6" (150mm) Roller 42" (1050mm) N6D3T-42-15-A45 26110 13.9
SIZE Idlers IDLERS 4
Roller 48" (1200mm) N6D3T-48-17-A45 26111 16.1
24"-36"
Shim idler up .5" (12.5mm) No Kits Required Roller 54" (1350mm) N6D3T-54-19-A45 26112 17.0
(600-900mm)
42"-72" Use (1) SHIM-KITL; Shim Roller 60" (1500mm) N6D3T-60-21-A45 26113 18.1
No Kits Required
(1050-1800mm) up .5" (12.5mm) Roller 72" (1800mm) N6D3T-72-25-A45 26114 21.6
Wing Plate Kit 24" (600mm)* EZWPK-24 78970 16.9
IMPACT BED CEMA E, 6" (150mm) CEMA E, 7" (175mm) Wing Plate Kit 30" (750mm)* EZWPK-30 78971 17.4
SIZE IDLERS IDLERS Wing Plate Kit 36" (900mm)* EZWPK-36 78972 21.2
36"-60" Use (3) SHIM-KITL; Shim Use (4) SHIM-KITL; Shim
(900-1500mm) up 1.5" (37.5mm) up 2" (50mm) 5
72" Use (4) SHIM-KITL; Shim Use (5) SHIM-KITL; Shim Wing Plate Kit 54" (1350mm)* EZWPK-54 78975 35.6
(1800mm) up 2" (50mm) up 2.5" (62.5mm)
Cross Stringer Kit 24" (600mm)* EZCSK-24 78978 49.2
6
7 Shim Kit Light Duty (incl. 4 shims) SHIM-KITL 77548 13.6
*Hardware Included
Replacement Quantities for EZSB-C
in. 24 30 36 42 48 54 60 72
mm 600 750 900 1050 1200 1350 1500 1800
ROLLS REQUIRED 2 2 2 2 2 2 2 2
BARS REQUIRED SLIDER 4 4 4 6 6 8 8 8
BAR BOLT KITS REQUIRED 8 8 8 12 12 16 16 16 NOTE: For 0.00 pricing, please
contact the Chile office for quotation.
U.S. Patent pending

Product Ordering EZSB-I
Flexco Slider Beds
Information with Impact Rolls
Flexco Slider Bed with Impact Rolls

(for impact zones with less than 200 lb-ft energy)
BELT WIDTH TONNAGE 4' (1.2M) LENGTH 5' (1.5M) LENGTH*
RATING
(ton/hr)
in. mm NUMBER CODE LBS NUMBER CODE LBS
24 600 3500 EZSB24-4I 78871 277.0 EZSB24-5I 78879 294.1
30 750 3500 EZSB30-4I 78872 300.0 EZSB30-5I 78880 317.1
36 900 4100 EZSB36-4I 78873 330.1 EZSB36-5I 78881 347.2
42 1050 4500 EZSB42-4I 78874 407.1 EZSB42-5I 78882 433.0
48 1200 4500 EZSB48-4I 78875 437.0 EZSB48-5I 78883 463.0
54 1350 4500 EZSB54-4I 78876 514.0 EZSB54-5I 78884 548.8
60 1500 4500 EZSB60-4I 78877 543.0 EZSB60-5I 78885 577.9
72 1800 4500 EZSB72-4I 78878 586.0 EZSB72-5I 78886 620.2
*5' (1.5M) beds come with 5 impact rolls
Product Notes:
• Outermost trough bar features 1" (25mm) solid UHMW slider bar to provide longer wear
life and consistent load zone sealing where impact is not present.
Adjustable Idler Set with Impact Rolls

(for placement in between 3 or more beds or in transitions;
24 600 EZAI-24I 79091 89.9
30 750 EZAI-30I 79092 100.0
36 900 EZAI-36I 79093 110.7
42 1050 EZAI-42I 79094 120.0
48 1200 EZAI-48I 79095 133.3
54 1350 EZAI-54I 79096 142.5
60 1500 EZAI-60I 79097 151.3
72 1800 EZAI-72I 79098 173.6
Specifications EZSB-I
Flexco Slider Beds
and Guidelines with Impact Rolls
DIM E
17.5
.69 50.8
2.00
DIM A
317.5 279.4
12.50 11.00
203.2
DIM C 8.00
DIM B
35°
152
DIM D 115.4 6.0
4.54
45°
20°

4’ (1.2 M) 5’ (1.5 M)*
Dim A Dim B Dim A Dim B Bed Width Dim C Dim D Dim E
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
24 600 33 838 9 229 9 229
30 750 39 991 9 229 11 279
36 900 45 1143 9 229 13 330
42 1050 51 1295 9 229 15 381
26 660.4 48.14 1222.8 34 863.6 58.38 1482.9
48 1200 57 1448 9 229 17 432
54 1350 63 1600 9.25 235 19 483
60 1500 69 1753 9.25 235 21 533
72 1800 81 2057 9.5 241 25 635
* 5' (1.5M) beds come with 5 impact rolls

Replacement EZSB-I
Flexco Slider Beds
Parts List with Impact Rolls
1a
2a 1
2
7
Replacement Parts
ORDERING ITEM WT.
1 Slider Bar, 4' (1.2M) SB4 78789 20.0
1a Slider Bar, 5' (1.5M) SB5 78790 24.1
2 Impact Bar, 4’ (1.2M) IB4 76926 17.0
2a Impact Bar, 5’ (1.5M) IB5 76927 21.0
Bar Bolt Kit (incl. 1 ea. 5/8"(15mm)
4a 3 carriage bolt, square washer, flat washer, IBBK 76928 0.5
6 8 9 4a Impact Roll Mount Kit*§ EZIRMK 79318 5.1
3 5 Center Roll Mount Kit for 5' (1.5M) x
4b EZCRMK24-48 90434 43.5
24-48" (600-1200mm)**
(hidden) 5a Center Roll Mount Kit for 5' (1.5M) x
4c EZCRMK54-60 90261 43.5
4b 4c 4d 54-60" (1350-1500mm)**
Center Roll Mount Kit for 5' (1.5M) x
4d EZCRMK72 90262 43.7
72" (1800mm)**
5 Impact Bar Support - L 4’ (1.2M)* EZBS-L4 78953 16.1
5a Impact Bar Support - L 5’ (1.5M)* EZBS-L5 78954 20.4
Impact Roll 24" (600mm) NI6D3T-24-9-A45 26184 10.1
6
Shim Requirements Impact Roll 60" (1500mm) NI6D3T-60-21-A45 26190 21.7
IMPACT BED CEMA C OR D, 5" (125mm) CEMA C OR D, 6" (150mm)
SIZE Idlers IDLERS
24"-36" Wing Plate Kit 30" (750mm)* EZWPK-30 78971 17.4
Shim idler up .5" (12.5mm) No Kits Required Wing Plate Kit 36" (900mm)* EZWPK-36 78972 21.2
(600-900mm)
42"-72" Use (1) SHIM-KITL; Shim Wing Plate Kit 42" (1050mm)* EZWPK-42 78973 26.2
No Kits Required 7
(1050-1800mm) up .5" (12.5mm) Wing Plate Kit 48" (1200mm)* EZWPK-48 78974 30.1
SIZE IDLERS IDLERS Cross Stringer Kit 24" (600mm)* EZCSK-24 78978 49.2
36"-60" Use (3) SHIM-KITL; Shim Use (4) SHIM-KITL; Shim Cross Stringer Kit 30" (750mm)* EZCSK-30 78979 56.5
(900-1500mm) up 1.5" (37.5mm) up 2" (50mm) Cross Stringer Kit 36" (900mm)* EZCSK-36 78980 63.8
72" Use (4) SHIM-KITL; Shim Use (5) SHIM-KITL; Shim Cross Stringer Kit 42" (1050mm)* EZCSK-42 78981 70.8
8
(1800mm) up 2" (50mm) up 2.5" (62.5mm) Cross Stringer Kit 48" (1200mm)* EZCSK-48 78982 78.5
9 Shim Kit Light Duty (incl. 4 shims) SHIM-KITL 77548 13.6
§4' beds require 2 ea item 4a;
5' beds require 1 ea item 4a and 1 ea item 4b, 4c or 4d as needed for bed length.
*Hardware Included **5' (1.5M) beds come with 5 impact rolls
Replacement Quantities for EZSB-I

in. 24 30 36 42 48 54 60 72
mm 600 750 900 1050 1200 1350 1500 1800
4' BEDS 4 4 4 4 4 4 4 4
ROLLS REQUIRED
5' BEDS 5 5 5 5 5 5 5 5
SLIDER 2 2 2 2 2 2 2 2
BARS REQUIRED
IMPACT 2 2 2 4 4 6 6 6
BAR BOLT KITS REQUIRED 10 10 10 16 16 22 22 22
BAR SUPPORTS REQUIRED 2 2 2 4 4 6 6 6
U.S. Patent pending
Product Ordering EZIB-L
Flexco Impact Beds
Information All Bars - Light Duty
Flexco Slider Bed Impact Bars - Light Duty

RATING
(ton/hr)
24 600 3500 EZIB24-4L 78887 304.3 EZIB24-5L 78895 338.8
30 750 3500 EZIB30-4L 78888 320.9 EZIB30-5L 78896 355.5
36 900 4100 EZIB36-4L 78889 384.8 EZIB36-5L 78897 428.1
42 1050 5200 EZIB42-4L 78890 454.4 EZIB42-5L 78898 506.5
48 1200 5800 EZIB48-4L 78891 518.4 EZIB48-5L 78899 579.3
54 1350 7000 EZIB54-4L 78892 589.0 EZIB54-5L 78900 658.8
60 1500 7600 EZIB60-4L 78893 652.0 EZIB60-5L 78901 729.9
72 1800 8100 EZIB72-4L 78894 721.5 EZIB72-5L 78902 808.7
Product Notes:
• Outermost trough bar features 1" (25mm) solid UHMW slider bar to provide longer
wear life and consistent load zone sealing where impact is not present.

Specifications EZIB-L
Flexco Impact Beds
and Guidelines All Bars - Light Duty

  
  
  
    

  
    
  
  
  
 
DIM

A 
 
     

 
DIM
  C   

  
B
DIM



DIM

D
 
 



 

 


 
 
 
  
 

 DOC. ID 

 
 
 
 

 

4’ (1.2 M) 5’ (1.5 M)
Dim A Dim B Dim A Dim B Bed Width Dim C Dim D
in. mm in. mm in. mm in. mm in. mm in. mm in. mm
24 600 33 838 9 229
30 750 39 991 9 229
36 900 45 1143 9 229
42 1050 51 1295 9 229
26 660.4 48.14 1222.8 34 863.6 58.38 1482.9
48 1200 57 1448 9 229
54 1350 63 1600 9.25 235
60 1500 69 1753 9.25 235
72 1800 81 2057 9.5 241
Replacement EZIB-L
Flexco Impact Beds
Parts List All Bars - Light Duty
2a
1a
2
1
Replacement Parts 5
ORDERING ITEM WT.
4 (hidden)
Slider Bar, 4' (1.2M) SB4 78789 20.0 4a
1 3
1a Slider Bar, 5' (1.5M) SB5 78790 24.1 7
(hidden)
2 Impact Bar, 4’ (1.2M) IB4 76926 17.0
2a Impact Bar, 5' (1.5M) IB5 76927 21.0
Bar Bolt Kit (incl. 1 ea. 5/8" (15mm) carriage
3 bolt, square washer, flat washer, lock washer, IBBK 76928 0.5
Nylock nut)
4 Impact Bar Support - L 4' (1.2M)* EZBS-L4 78953 16.1
4a Impact Bar Support - L 5' (1.5M)* EZBS-L5 78954 20.4
Center Bar Mount Kit 24" (600mm)* EZBMK-24 78944 5.2
5
6
Wing Plate Kit 48" (1200mm)* EZWPK-48 78974 30.1 Shim Requirements
Wing Plate Kit 54" (1350mm)* EZWPK-54 78975 35.6 IMPACT BED CEMA C OR D, 5" (125mm) CEMA C OR D, 6" (150mm)
SIZE Idlers IDLERS
24"-36"
Wing Plate Kit 72" (1800mm)* EZWPK-72 78977 46.7 Shim idler up .5" (12.5mm) No Kits Required
(600-900mm)
Cross Stringer Kit 24" (600mm)* EZCSK-24 78978 49.2 42"-72" Use (1) SHIM-KITL;
Cross Stringer Kit 30" (750mm)* EZCSK-30 78979 56.5 No Kits Required
(1050-1800mm) Shim up .5" (12.5mm)
Cross Stringer Kit 42" (1050mm)* EZCSK-42 78981 70.8 IMPACT BED CEMA E, 6" (150mm) CEMA E, 7" (175mm)
7
Cross Stringer Kit 48" (1200mm)* EZCSK-48 78982 78.5 SIZE IDLERS IDLERS
Cross Stringer Kit 54" (1350mm)* EZCSK-54 78983 85.8 36"-60" Use (3) SHIM-KITL; Shim Use (4) SHIM-KITL;
Cross Stringer Kit 60" (1500mm)* EZCSK-60 78984 93.1 (900-1500mm) up 1.5" (37.5mm) Shim up 2" (50mm)
Cross Stringer Kit 72" (1800mm)* EZCSK-72 78985 99.1 72" Use (4) SHIM-KITL; Shim Use (5) SHIM-KITL;
8 Shim Kit Light Duty (incl. 4 shims) SHIM-KITL 77548 13.6 (1800mm) up 2" (50mm) Shim up 2.5" (62.5mm)
*Hardware Included
Replacement Quantities for EZIB-L

in. 24 30 36 42 48 54 60 72
mm 600 750 900 1050 1200 1350 1500 1800
SLIDER 2 2 2 2 2 2 2 2
BARS REQUIRED
IMPACT 4 4 5 7 8 10 11 12
U.S. Patent pending

Product Ordering EZIB-M
Flexco Impact Beds
Information All Bars - Medium Duty
Flexco Slider Bed Impact Bars - Medium Duty

RATING
(ton/hr)
24 600 8,100 EZIB24-4M 78903 409.5 EZIB24-5M 78911 452.6
30 750 8,100 EZIB30-4M 78904 434.5 EZIB30-5M 78912 477.6
36 900 9,500 EZIB36-4M 78905 473.4 EZIB36-5M 78913 516.5
42 1050 12,200 EZIB42-4M 78906 595.0 EZIB42-5M 78914 655.7
48 1200 13,600 EZIB48-4M 78907 672.9 EZIB48-5M 78915 742.3
54 1350 16,300 EZIB54-4M 78908 757.9 EZIB54-5M 78916 836.3
60 1500 17,600 EZIB60-4M 78909 796.1 EZIB60-5M 78917 874.4
72 1800 19,000 EZIB72-4M 78910 844.2 EZIB72-5M 78918 1,016.3
Product Notes:
• Outermost trough bar features 1" (25mm) solid UHMW slider bar to provide longer
wear life and consistent load zone sealing where impact is not present.
Specifications EZIB-M
Flexco Impact Beds
and Guidelines All Bars - Medium Duty

  
  
  
   
    
  

  
  
  

DIM
 A 


 


 
DIM

C   


DIM
 B


DIM
 D

 
 
 
 

 


 
 
 
  
 

 DOC. ID

 
 

 
 


4’ (1.2 M) 5’ (1.5 M)
24 600 33 838 9 229
30 750 39 991 9 229
36 900 45 1143 9 229
42 1050 51 1295 9 229
16 406.4 48.14 1222.8 22 558.8 58.38 1482.9
48 1200 57 1448 9 229
54 1350 63 1600 9.25 235
60 1500 69 1753 9.25 235
72 1800 81 2057 9.5 241

Replacement EZIB-M
Flexco Impact Beds
Parts List All Bars - Medium Duty
2a
2 1a
1
Replacement Parts
ORDERING ITEM WT.
5 7
(hidden) 4 3 1 Slider Bar, 4' (1.2M) SB4 78789 20.0
1a Slider Bar, 5' (1.5M) SB5 78790 24.1
4a
2 Impact Bar, 4' (1.2M) IB4 76926 17.0
2a Impact Bar, 5' (1.5M) IB5 76927 21.0
Bar Bolt Kit (incl. 1 ea. 5/8" (15mm)
3 carriage bolt, square washer, flat washer, IBBK 76928 0.5
4 Impact Bar Support - M 4' (1.2M)* IBS-M4 76931 16.9
4a Impact Bar Support - M 5' (1.5M)* IBS-M5 76932 21.2
Shim Requirements Center Bar Mount Kit 30" (750mm)* EZBMK-30 78945 5.7
IMPACT BED CEMA C OR D, 5" (125mm) CEMA C OR D, 6" (150mm)
SIZE Idlers IDLERS 5
24"-36" Center Bar Mount Kit 48" (1200mm)* EZBMK-48 78948 9.8
Shim idler up .5" (12.5mm) No Kits Required Center Bar Mount Kit 54" (1350mm)* EZBMK-54 78949 10.5
(600-900mm)
42"-72" Use (1) SHIM-KITM; Center Bar Mount Kit 60" (1500mm)* EZBMK-60 78950 12.3
No Kits Required
(1050-1800mm) Shim up .5" (12.5mm) Center Bar Mount Kit 72" (1800mm)* EZBMK-72 78951 14.6
SIZE IDLERS IDLERS Wing Plate Kit 36" (900mm)* EZWPK-36 78972 21.2
36"-60" Use (3) SHIM-KITM; Shim Use (4) SHIM-KITM; Wing Plate Kit 42" (1050mm)* EZWPK-42 78973 26.2
(900-1500mm) up 1.5" (37.5mm) Shim up 2" (50mm) 6
72" Use (4) SHIM-KITM; Shim Use (5) SHIM-KITM; Wing Plate Kit 54" (1350mm)* EZWPK-54 78975 35.6
(1800mm) up 2" (50mm) Shim up 2.5" (62.5mm) Wing Plate Kit 60" (1500mm)* EZWPK-60 78976 39.0
7
8 Shim Kit Medium Duty (incl. 4 shims) SHIM-KITM 77549 20.4
*Hardware Included
Replacement Quantities for EZIB-M

in. 24 30 36 42 48 54 60 72
mm 600 750 900 1050 1200 1350 1500 1800
SLIDER 2 2 2 2 2 2 2 2
BARS REQUIRED
IMPACT 4 4 5 7 8 10 11 12
Product Ordering MSB
Modular Slider Beds
Information with Impact Rolls
Modular Slider Bed with Impact Rolls

BELT WIDTH TONNAGE 2' (600mm) SECTIONS
RATING
ORDERING ITEM WT.
(ton/hr)
24 600 3500 MSB24-2I 79979 246.8
30 750 3500 MSB30-2I 79980 263.5
36 900 4100 MSB36-2I 79981 297.9
42 1050 4500 MSB42-2I 79982 373.2
48 1200 4500 MSB48-2I 79983 393.4
54 1350 4500 MSB54-2I 79984 493.2
60 1500 4500 MSB60-2I 79985 513.9
72 1800 4500 MSB72-2I 79986 557.9
Add-on Impact Roller Kit

(for placement between 2 beds to reduce the space
between impact rollers) Add-on Impact Roller installed
BELT WIDTH ORDERING ITEM WT. between 2 Modular Slider Beds
24 600 MSB24RMK 79991 17.0
30 750 MSB30RMK 79992 18.5
36 900 MSB36RMK 79993 20.2
42 1050 MSB42RMK 79994 21.8
48 1200 MSB48RMK 79995 24.0
54 1350 MSB54RMK 79996 24.9
60 1500 MSB60RMK 79997 26.0
72 1800 MSB72RMK 79998 29.5

(for placement between multiple beds or in transitions;
24 600 EZAI-24I 79091 89.9
30 750 EZAI-30I 79092 100.0
36 900 EZAI-36I 79093 110.7
42 1050 EZAI-42I 79094 120.0
48 1200 EZAI-48I 79095 133.3
54 1350 EZAI-54I 79096 142.5
60 1500 EZAI-60I 79097 151.3
72 1800 EZAI-72I 79098 173.6
Product Notes:
• Modular design accomodates any length of load zone
• No need to specify troughing angle–designed to adjust to 20°, 35°, 45°
• All bars feature 1" (25mm) solid UHMW
• With removal of a few bolts, the wings and center sections slide out for service
• Optional add-on roller to join two beds and reduce the space between idlers from every
24" (600mm) to every 12" (300mm).

Specifications MSB
Modular Slider Beds
and Guidelines with Impact Rolls
14.3
Dim. B
.56
139.7
5.50
520.7
20.50
215.9
8.50 Dim. A 50.8
2.00
152
A 6.0
35°
A
SECTION A-A
228.6 609.6
9.00 24.00
45°
20°
Bed Width Dim A Dim B

24" (600mm) 33" (838.2mm) 9" (228.6mm)
30" (750mm) 39" (990.6mm) 11" (279.4mm)
36" (900mm) 45" (1143mm) 13" (330.2mm)
42" (1050mm) 51" (1295.4mm) 15" (381mm)
48" (1200mm) 57" (1447.8mm) 17" (431.8mm)
54" (1350mm) 63" (1600.2mm) 19" (482.6mm)
60" (1500mm) 69" (1752.6mm) 21" (533.4mm)
72" (1800mm) 81" (2057.4mm) 25" (635mm)
Replacement MSB
Modular Slider Beds
Parts List with Impact Rolls
1a
1
2
Replacement Parts 3
ORDERING ITEM WT. 4
1 Slider Bar, 2' (600mm) SB2 79970 10.0
Slider Bar with Hardware, 2'
1a SB2F 79988 10.9
(600mm)
2 Impact Bar, 2' (600mm) MIB2-1U 79379 19.7
Impact Bar with Hardware, 2'
2a MIB2-1UF 79908 20.0
(600mm)
3 Roller Mount Kit* MSBRMK 79987 7.9
4
Cross Stringer Kit 24" (600mm)* MIB24CSK 90237 86.7
5
Cross Stringer Kit 54" (1350mm)* MIB54CSK 90242 153.7 Shim Requirements
Cross Stringer Kit 60" (1500mm)* MIB60CSK 90243 166.6 IMPACT BED CEMA C OR D, CEMA C OR D,
Cross Stringer Kit 72" (1800mm)* MIB72CSK 90244 194.7 SIZE 5" (125mm) Idlers 6" (150mm) IDLERS
Wing Plate Kit 24" (600mm)* MIB24WPK 90245 38.9 24"-36" Use (1) shim kit;
No shim
Wing Plate Kit 30" (750mm)* MIB30WPK 90246 39.8 (600-900mm) Shim idler up .5" (13mm)
No shim
(1050-1800mm) Shim bed up .5" (13mm)
Wing Plate Kit 42" (1050mm)* MIB42WPK 90248 59.7
6 IMPACT BED CEMA E, CEMA E,
SIZE 6" (150mm) Idlers 7" (175mm) IDLERS
36"-60" Use (3) shim kits; Use (4) shim kits;
Wing Plate Kit 60" (1500mm)* MIB60WPK 90251 86.7 (900-1500mm) Shim bed up 1.5" (38mm) Shim bed up 2" (50mm)
Wing Plate Kit 72" (1800mm)* MIB72WPK 90252 92.8 72" Use (4) shim kits; Use (5) shim kits;
- Shim Kit (incl. 4 shims) SHIM-KITMOD 79989 11.8 (1800mm) Shim bed up 2" (50mm) Shim bed up 2.5" (64mm)
*Hardware Included
Replacement Quantities for MSB

in. 24 30 36 42 48 54 60 72
mm 600 750 900 1050 1200 1350 1500 1800
BARS SLIDER 2 2 2 2 2 2 2 2
REQUIRED IMPACT 2 2 2 4 4 6 6 6

Product Ordering MIB
Modular Impact Beds
Information All Bars
Modular Impact Bed

BELT WIDTH TONNAGE 2' (300mm) LENGTH
RATING
ORDERING ITEM WT.
(ton/hr)
24 600 12800 MIB24-2H 79971 288.0
30 750 12800 MIB30-2H 79972 303.9
36 900 14900 MIB36-2H 79973 365.1
42 1050 19200 MIB42-2H 79974 439.0
48 1200 21300 MIB48-2H 79975 484.4
54 1350 25600 MIB54-2H 79976 583.8
60 1500 27700 MIB60-2H 79977 629.5
72 1800 29900 MIB72-2H 79978 698.3

(for placement between multiple beds or in transitions;
24 600 EZAI-24I 79091 89.9
30 750 EZAI-30I 79092 100.0
36 900 EZAI-36I 79093 110.7
42 1050 EZAI-42I 79094 120.0
48 1200 EZAI-48I 79095 133.3
54 1350 EZAI-54I 79096 142.5
60 1500 EZAI-60I 79097 151.3
72 1800 EZAI-72I 79098 173.6
Product Notes:
• Modular design accomodates any length of load zone
• No need to specify troughing angle–designed to adjust to 20°, 35°, 45°
• All bars feature 1" (25mm) solid UHMW
• With removal of a few bolts, the wings and center sections slide out for service
Specifications MIB
Modular Impact Beds
and Guidelines All Bars
14.3
.56
139.7
5.50
520.7
20.50
215.9
8.50 50.8
DIM A 2.00
A
35°
A
228.6 SECTION A-A
9.00 609.6
24.00
45°
20°
Bed Width Dim A

24" (600mm) 33" (838.2mm)
30" (750mm) 39" (990.6mm)
36" (900mm) 45" (1143mm)
42" (1050mm) 51" (1295.4mm)
48" (1200mm) 57" (1447.8mm)
54" (1350mm) 63" (1600.2mm)
60" (1500mm) 69" (1752.6mm)
72" (1800mm) 81" (2057.4mm)

Replacement MIB
Modular Impact Beds
Parts List All Bars
1a
1 2a
2
20º
35º
45º
20º
35º
45º
Replacement Parts
ORDERING ITEM WT.
3
1 Slider Bar, 2' (600mm) SB2 79970 10.0
(hidden)
Slider Bar with Hardware, 2'
1a SB2F 79988 10.9
(600mm)
2 Impact Bar, 2' (600mm) MIB2-1U 79379 19.7
Impact Bar with Hardware, 2'
2a MIB2-1UF 79908 20.0
(600mm)
3
Shim Requirements
IMPACT BED CEMA C OR D, CEMA C OR D,
Wing Plate Kit 42" (1050mm)* MIB42WPK 90248 59.7 SIZE 5" (125mm) Idlers 6" (150mm) IDLERS
4
Wing Plate Kit 54" (1350mm)* MIB54WPK 90250 83.8 No shim
(600-900mm) Shim idler up .5" (13mm)
No shim
Wing Plate Kit 72" (1800mm)* MIB72WPK 90252 92.8 (1050-1800mm) Shim bed up .5" (13mm)
Center Plate Kit 24" (600mm)* MIB24CPK 90253 19.3 IMPACT BED CEMA E, CEMA E,
Center Plate Kit 30" (750mm)* MIB30CPK 90254 20.4 SIZE 6" (150mm) Idlers 7" (175mm) IDLERS
Center Plate Kit 36" (900mm)* MIB36CPK 90255 29.2 36"-60" Use (3) shim kits; Use (4) shim kits;
Center Plate Kit 42" (1050mm)* MIB42CPK 90256 29.9 (900-1500mm) Shim bed up 1.5" (38mm) Shim bed up 2" (50mm)
5 72" Use (4) shim kits; Use (5) shim kits;
Center Plate Kit 48" (1200mm)* MIB48CPK 90257 37.0
(1800mm) Shim bed up 2" (50mm) Shim bed up 2.5" (64mm)
- Shim Kit (incl. 4 shims) SHIM-KITMOD 79989 11.8
*Hardware Included
Replacement Quantities for MIB

in. 24 30 36 42 48 54 60 72
mm 600 750 900 1050 1200 1350 1500 1800
BARS SLIDER 2 2 2 2 2 2 2 2
REQUIRED IMPACT 4 4 5 7 8 10 11 12
Specifications DRX™ Impact Beds
& Guidelines
It’s the Structure, not the bars
It absorbs more impact to save your belt. Our exclusive Velocity Reduction
Technology™ provides two levels of impact relief.
Level 1: Impact Bars first absorb impact energy. Unique Impact Bar Supports on all DRX Impact Beds allow the impact bars to
function properly - expanding and absorbing more impact energy.
Level 2: On DRX200, 750 and 1500 impact beds, Isolation Mounts provide a second level of reaction force reduction, absorbing
additional impact energy and minimizing transmission back to the belt. The DRX3000 Dynamic has Impact Energy Absorbers to
disperse an immense amount of impact, even in extremely severe applications.
User-Friendly Slide-Out Service™

• All DRX Impact Beds separate in the middle to slide apart and out.
• Can be easily and safely converted from the run position to the service position.
• Impact bars are easy to get to for changeout. A complete changeout can be done in one or two hours.
Unique Impact Bar Supports protect the impact bars from damage, extending service life. An Anti-
Migratory Tab on each support secures the bar and prevents it from sliding in the direction of the belt.
Other Features and Benefits

• Uses exclusive anti-spin square washers. Allows use of carriage bolts to secure impact bars instead of expensive T bolts.
Impact Energy Calculation Chart

How to spec the correct impact bed Roller Size and CEMA Rating
Largest Material
for your conveyor transfer point
Lump Weight ( w ) 5" (125mm) 6" (150mm)
CEMA C D E
Belt Width
Troughing Angle: 20° 35°
Bed Length: 4' (1.2M) 5' (1.5M)

Drop Height ( h)
Impact EnergyEnergy
Impact
Lump Weight ( w )
Drop Height ( h) x
Total = lb-ft See Below See Below

Up to 200 lb-ft (25 kg-m)—DRX200
Up
200 to
to 200 lb-ft—
750 lb-ft DRX200
(25 to 100 kg-m)—DRX750
200 to 750 lb-ft— DRX750
750 to 1500 lb-ft (100 to 200 kg-m)—DRX1500
750
1500toto1500
3000 lb-ft—
lb-ft (200DRX1500
to 400 kg-m)—DRX3000
1500 to 3000 lb-ft— DRX3000

Product Ordering DRX200
Impact Beds
Information
DRX200 CEMA D construction Product Notes:
BELT WIDTH TONNAGE 4' (1.2 M) BEDS, 20° TROUGH 4' (1.2 M) BEDS, 35° TROUGH • Rated for impacts up to
RATING ORDERING ITEM WT. ORDERING ITEM WT. 200 lb-ft (25 kg-m)
in. mm (ton/hr) NUMBER CODE LBS NUMBER CODE LBS. • Rated for belt speeds up
24 600 3500 DRXL-24-420 76816 260.0 DRXL-24-435 76832 260.0
to 1000 fpm (5m/s)
30 750 3500 DRXL-30-420 76817 282.0 DRXL-30-435 76833 282.0
• Slide-out serviceability
36 900 4100 DRXL-36-420 76818 323.0 DRXL-36-435 76834 323.0
• Velocity Reduction
42 1050 5200 DRXL-42-420 76819 412.0 DRXL-42-435 76835 412.0
Technology provides
48 1200 5800 DRXL-48-420 76820 433.0 DRXL-48-435 76836 433.0
54 1350 7000 DRXL-54-420 76821 498.0 DRXL-54-435 76837 498.0
multiple points of
60 1500 7600 DRXL-60-420 76822 543.0 DRXL-60-435 76838 543.0
protection
72 1800 8100 DRXL-72-420 76823 615.0 DRXL-72-435 76839 615.0 • Alternative trough angles
or picking idler profiles
BELT WIDTH TONNAGE 5' (1.5 M) BEDS, 20° TROUGH 5' (1.5 M) BEDS, 35° TROUGH available by special quote
RATING ORDERING ITEM WT. ORDERING ITEM WT.
in. mm (ton/hr) NUMBER CODE LBS NUMBER CODE LBS.
24 600 3500 DRXL-24-520 76824 290.0 DRXL-24-535 76840 290.0
30 750 3500 DRXL-30-520 76825 311.0 DRXL-30-535 76841 311.0
36 900 4100 DRXL-36-520 76826 357.0 DRXL-36-535 76842 357.0
42 1050 5200 DRXL-42-520 76827 459.0 DRXL-42-535 76843 459.0
48 1200 5800 DRXL-48-520 76828 480.0 DRXL-48-535 76844 480.0
54 1350 7000 DRXL-54-520 76829 554.0 DRXL-54-535 76845 554.0
60 1500 7600 DRXL-60-520 76830 602.0 DRXL-60-535 76846 602.0
72 1800 8100 DRXL-72-520 76831 679.0 DRXL-72-535 76847 679.0
1a
2a
1
2
Replacement Parts
ORDERING ITEM WT.
1 Impact Bar, 4' IB4 76926 17.0
1a Impact Bar, 5' IB5 76927 21.2
2 Slider Bar, 4' (1.2M) SB4 78789 20.0
2a Slider Bar, 5' (1.5M) SB5 78790 24.1
5 Impact Bar Bolt Kit
4 6 3 incl. (1) ea 5/8" carriage bolt, square washer, IBBK 76928 0.5
4a flat washer, lock washer, Nylock nut
3 Impact Bar Support -L 4'
* Belt width + 9" = Structure width 7 4 incl. (1) ea bar support, carriage bolt, square IBS-L4 76929 16.8
washer, lock washer, Nylock nut
Impact Bar Support -L 5'
4a incl. (1) ea bar support, carriage bolt, square IBS-L5 76930 21.0
washer, lock washer, Nylock nut
Sliding Support Arm Bolt Kit
5 incl. (2) 2" bolts, (2) lock washers, ISABK-LMH 77529 2.0
(2) Nylock nuts
6 Isolation Mount Kit IMK 76936 3.8
7 DRX200 Shim Kit (incl. 4 shims) SHIM-KITL 77548 13.6
Impact Bed Size Cema C or D, 5" IDLERS CEMA C or D, 6" IDLERS
DRX200: 24"- 36" Shim idler up 1/2" No Kits Required
Use (1) SHIM-KITL;
DRX200: 42"- 72" No Kits Required
Shim up 0.5" Replacement Bars, Bar Supports and Bolt Kits
Required per Belt Width - DRX200
in. 24 30 36 42 48 54 60 72
Impact Bed Size CEMA E, 6" IDLERS CEMA E, 7" IDLERS
mm 600 750 900 1050 1200 1350 1500 1800
Use (3) SHIM-KITL; Use (4) SHIM-KITL;
DRX200: 36"-60" Slider Bars Required 2 2 2 2 2 2 2 4
Shim up 1.5" Shim up 2"
Use (4) SHIM-KITL; Use (5) SHIM-KITL; Impact Bars Required 4 4 5 7 8 10 11 12
DRX200: 72" Impact Bar Supports Required 4 4 5 7 8 10 11 12
Shim up 2" Shim up 2.5"
Impact Bar Bolt Kits Required 16 16 19 25 28 34 37 44
Specifications DRX200
Impact Beds
and Guidelines
17.5 50.8
.69 2.00
812.8
DIM
32.00
A
317.5 279.4
12.50 11.00
1295.4
DIM C
51.00
1222.8
DIM
48.14B
20°
228.6
DIM
9.00
D
12.8
.50

4’ (1.2 M) 5’ (1.5 M)
24 600 33 838 9 229
30 750 39 991 9 229
36 900 45 1143 9 229
42 1050 51 1295 9 229
32 812.8 48.14 1222.8 44 1117.6 58.38 1482.9
48 1200 57 1448 9 229
54 1350 63 1600 9.25 235
60 1500 69 1753 9.25 235
72 1800 81 2057 9.5 241

Impact Beds
Information
BELT WIDTH TONNAGE 4' (1.2 M) BEDS, 20° TROUGH 4' (1.2 M) BEDS, 35° TROUGH • Rated for impacts up to
RATING ORDERING ITEM WT. ORDERING ITEM WT. 750 lb-ft (100 kg-m)
in. mm (ton/hr) NUMBER CODE LBS NUMBER CODE LBS. • Rated for belt speeds up
24 600 8,100 DRXM-24-420 76848 365.0 DRXM-24-435 76864 365.0 to 1000 fpm (5m/s)
30 750 8,100 DRXM-30-420 76849 397.0 DRXM-30-435 76865 397.0 • Slide-out serviceability
36 900 9,500 DRXM-36-420 76850 467.0 DRXM-36-435 76866 467.0 • Velocity Reduction
42 1050 12,200 DRXM-42-420 76851 592.0 DRXM-42-435 76867 592.0 Technology provides
48 1200 13,600 DRXM-48-420 76852 623.0 DRXM-48-435 76868 623.0 multiple points of
54 1350 16,300 DRXM-54-420 76853 704.0 DRXM-54-435 76869 704.0 protection
60 1500 17,600 DRXM-60-420 76854 779.0 DRXM-60-435 76870 779.0 • Alternative trough angles
72 1800 19,000 DRXM-72-420 76855 896.0 DRXM-72-435 76871 896.0 or picking idler profiles
BELT WIDTH TONNAGE 5' (1.5 M) BEDS, 20° TROUGH 5' (1.5 M) BEDS, 35° TROUGH available by special quote
24 600 8,100 DRXM-24-520 76856 403.0 DRXM-24-535 76872 403.0
30 750 8,100 DRXM-30-520 76857 435.0 DRXM-30-535 76873 435.0
36 900 9,500 DRXM-36-520 76858 514.0 DRXM-36-535 76874 514.0
42 1050 12,200 DRXM-42-520 76859 656.0 DRXM-42-535 76875 656.0
48 1200 13,600 DRXM-48-520 76860 687.0 DRXM-48-535 76876 687.0
54 1350 16,300 DRXM-54-520 76861 777.0 DRXM-54-535 76877 777.0
60 1500 17,600 DRXM-60-520 76862 861.0 DRXM-60-535 76878 861.0
72 1800 19,000 DRXM-72-520 76863 985.0 DRXM-72-535 76879 985.0
1 1a
2 2a
Replacement Parts
ORDERING ITEM WT.
1 Impact Bar, 4' IB4 76926 17.0
1a Impact Bar, 5' IB5 76927 21.2
2 Slider Bar, 4' (1.2M) SB4 78789 20.0
2a Slider Bar, 5' (1.5M) SB5 78790 24.1
Impact Bar Bolt Kit (incl. (1) ea 5/8"
5 3 carriage bolt, square washer, flat washer, IBBK 76928 0.5
4 Impact Bar Support -M 4' (incl. (1) bar
4a 4 support, (2) ea carriage bolt, IBS-M4 76931 16.9
3 7 square washer, lock washer, Nylock nut)
6
Impact Bar Support -M 5' (incl. (1)
4a bar support, (2) ea carriage bolt, square IBS-M5 76932 21.2
washer, lock washer, Nylock nut)
Sliding Support Arm Bolt Kit (incl. (2) 2"
5 ISABK-LMH 77529 2.0
bolts, (2) lock washers, (2) Nylock nuts)
* Belt width + 9" = Structure width 7 DRX750 Shim Kit (incl. 6 shims) SHIM-KITM 77549 20.4
Cema C or D, CEMA C or D,
Impact Bed Size 5" IDLERS 6" IDLERS
Use (1) SHIM-KITM;
Shim up 0.5"
Replacement Bars, Bar Supports and Bolt Kits
CEMA E, CEMA E, Required per Belt Width - DRX750
Impact Bed Size 6" IDLERS 7" IDLERS in. 24 30 36 42 48 54 60 72
Use (3) SHIM-KITM; Use (4) SHIM-KITM; mm 600 750 900 1050 1200 1350 1500 1800
DRX750: 36"-60"
Shim up 1.5" Shim up 2" Slider Bars Required 2 2 2 2 2 2 2 4
Use (4) SHIM-KITM; Use (5) SHIM-KITM; Impact Bars Required 4 4 5 7 8 10 11 12
DRX750: 72"
Shim up 2" Shim up 2.5"
Impact Bar Supports Required 4 4 5 7 8 10 11 12
Impact Bar Bolt Kits Required 26 26 31 41 46 56 61 72
Impact Beds
and Guidelines
17.5
17.5 50.8
50.8
.69.69 2.00
2.00
406.4
406.4
DIM
16.00
16.00
A
812.8
812.8
32.00
32.00
317.5
317.5 279.4
279.4
12.50
12.50 11.00
11.00
1295.4
1295.4
DIM
51.00
51.00
C
1222.8
1222.8
DIM B
48.14
48.14
20°20°
228.6
228.6
DIM
9.00D
9.00
12.8
12.8
.50.50

4’ (1.2 M) 5’ (1.5 M)
24 600 33 838 9 229
30 750 39 991 9 229
36 900 45 1143 9 229
42 1050 51 1295 9 229
16 406.4 48.14 1222.8 22 558.8 58.38 1482.9
48 1200 57 1448 9 229
54 1350 63 1600 9.25 235
60 1500 69 1753 9.25 235
72 1800 81 2057 9.5 241

Impact Beds
Information
BELT WIDTH TONNAGE 4' (1.2 M) BEDS, 20° TROUGH 4' (1.2 M) BEDS, 35° TROUGH • Rated for impacts up to 1500
RATING ORDERING ITEM WT. ORDERING ITEM WT. lb-ft (200 kg-m)
in. mm (ton/hr) NUMBER CODE LBS NUMBER CODE LBS. • Rated for belt speeds up to
24 600 12,800 DRXH-24-420 76880 503.0 DRXH-24-435 76896 503.0 1000 fpm (5m/s)
30 750 12,800 DRXH-30-420 76881 545.0 DRXH-30-435 76897 545.0 • Slide-out serviceability
36 900 14,900 DRXH-36-420 76882 628.0 DRXH-36-435 76898 628.0 • Velocity Reduction
42 1050 19,200 DRXH-42-420 76883 806.0 DRXH-42-435 76899 806.0 Technology provides
48 1200 21,300 DRXH-48-420 76884 847.0 DRXH-48-435 76900 847.0 multiple points of protection
54 1350 25,600 DRXH-54-420 76885 977.0 DRXH-54-435 76901 977.0 • Alternative trough angles
60 1500 27,700 DRXH-60-420 76886 1,066.0 DRXH-60-435 76902 1,066.0 or picking idler profiles
72 1800 29,900 DRXH-72-420 76887 1,210.0 DRXH-72-435 76903 1,210.0 available by special quote
BELT WIDTH TONNAGE 5' (1.5 M) BEDS, 20° TROUGH 5' (1.5 M) BEDS, 35° TROUGH
24 600 12,800 DRXH-24-520 76888 558.0 DRXH-24-535 76904 558.0
30 750 12,800 DRXH-30-520 76889 601.0 DRXH-30-535 76905 601.0
36 900 14,900 DRXH-36-520 76890 692.0 DRXH-36-535 76906 692.0
42 1050 19,200 DRXH-42-520 76891 896.0 DRXH-42-535 76907 896.0
48 1200 21,300 DRXH-48-520 76892 937.0 DRXH-48-535 76908 937.0
54 1350 25,600 DRXH-54-520 76893 1,084.0 DRXH-54-535 76909 1,084.0
60 1500 27,700 DRXH-60-520 76894 1,181.0 DRXH-60-535 76910 1,181.0
72 1800 29,900 DRXH-72-520 76895 1,334.0 DRXH-72-535 76911 1,334.0
Replacement Parts
1 1a
ORDERING ITEM WT.
2 2a REF DESCRIPTION NUMBER CODE LBS.
1 Impact Bar, 4' IB4 76926 17.0
1a Impact Bar, 5' IB5 76927 21.2
2 Slider Bar, 4' (1.2M) SB4 78789 20.0
2a Slider Bar, 5' (1.5M) SB5 78790 24.1
Impact Bar Bolt Kit
incl. (1) ea 5/8" carriage bolt, square
3 IBBK 76928 0.5
washer, flat washer, lock washer,
Nylock nut
Impact Bar Support -H 4'
4 incl. (1) bar support, (2) ea carriage bolt, IBS-H4 76933 16.6
5 square washer, lock washer, Nylock nut
4a 4 Impact Bar Support -H 5'
3 6 4a incl. (1) bar support, (2) ea carriage bolt, IBS-H5 76934 21.0
*Belt width + 9" = 7 square washer, lock washer, Nylock nut
Structure width (hidden) Sliding Support Arm Bolt Kit
5 incl. (2) 2" bolts, (2) lock washers, ISABK-LMH 77529 2.0
(2) Nylock nuts
7 DRX1500 Shim Kit (incl. 8 shims) SHIM-KITH 77550 27.2
Cema C or D, CEMA C or D,
Impact Bed Size 5" IDLERS 6" IDLERS
Use (1) SHIM-KITH; Replacement Bars and Bolt Kits Required
Shim up 0.5" per Belt Width - DRX1500
in. 24 30 36 42 48 54 60 72
CEMA E, CEMA E,
Impact Bed Size 6" IDLERS 7" IDLERS mm 600 750 900 1050 1200 1350 1500 1800
Use (3) SHIM-KITH; Use (4) SHIM-KITH; Slider Bars Required 2 2 2 2 2 2 2 4
DRX1500: 36"-60" Impact Bars Required 4 4 5 7 8 10 11 12
Shim up 1.5" Shim up 2"
Use (4) SHIM-KITH; Use (5) SHIM-KITH; Impact Bar Supports Required 4 4 5 7 8 10 11 12
DRX1500: 72"
Shim up 2" Shim up 2.5" Impact Bar Bolt Kits Required 32 32 38 50 56 68 74 88
Impact Beds
and Guidelines
17.5 50.8
.69 2.00
317.5
DIM A
12.50
635
25.00
952.5
37.50
317.5 279.4
12.50 11.00
1295.4
DIM
51.00C
1222.8
DIM B
48.14
20°
228.6
DIM
9.00
D
12.8
.50

4’ (1.2 M) 5’ (1.5 M)
24 600 33 838 9 229
30 750 39 991 9 229
36 900 45 1143 9 229
42 1050 51 1295 9 229
12.5 317.5 48.14 1222.8 16 406.4 58.38 1482.9
48 1200 57 1448 9 229
54 1350 63 1600 9.25 235
60 1500 69 1753 9.25 235
72 1800 81 2057 9.5 241

Dynamic Beds
Information
DRX3000 CEMA E construction Product Notes:
BELT WIDTH TONNAGE 5' (1.5 M) BEDS, 20° TROUGH 5' (1.5 M) BEDS, 35° TROUGH • For extreme impact
RATING ORDERING ITEM WT. ORDERING ITEM WT. applications up to 3000 lb-
in. mm (ton/hr) NUMBER CODE LBS NUMBER CODE LBS. ft (lump size x drop height).
42 1050 28,700 DRXD-42-520 76912 1,351.0 DRXD-42-535 76919 1,351.0 • Rated for belt speeds up to
48 1200 31,900 DRXD-48-520 76913 1,407.0 DRXD-48-535 76920 1,407.0 1000 fpm (5m/s)
54 1350 38,300 DRXD-54-520 76914 1,568.0 DRXD-54-535 76921 1,568.0 • Impact Energy Absorbers
60 1500 41,500 DRXD-60-520 76915 1,676.0 DRXD-60-535 76922 1,676.0 compress up to 3" (75mm)
72 1800 44,700 DRXD-72-520 76916 2,098.0 DRXD-72-535 76923 2,098.0 to absorb extreme impact
84 2100 51,100 DRXD-84-520 76917 2,261.0 DRXD-84-535 76924 2,261.0 energy to minimize
96 2400 63,900 DRXD-96-520 76918 2,609.0 DRXD-96-535 76925 2,609.0 damaging forces and
protect the belt.
• Alternative trough angles
or picking idler profiles
available by special quote
2 1
6 6a
Replacement Parts
4
ORDERING ITEM WT.
* Belt width + 9" = Structure width 5
3 REF DESCRIPTION NUMBER CODE LBS.
1 Impact Bar, 5' (1/2" UHMW) IB5 76927 21.2
2 Slider Bar, 5' (1.5M) SB5 78790 24.1
Impact Bar Bolt Kit
3 incl. (1) ea 5/8" carriage bolt, square washer, IBBK 76928 0.5
flat washer, lock washer, Nylock nut
Impact Bar Support - D 5'
4 incl. (1) bar support, (2) ea carriage bolt, IBS-D5 77530 21.0
square washer, lock washer, Nylock nut
Sliding Support Arm Bolt Kit
5 incl. (4) 1-1/2" bolts, (2) 2" bolts, ISABK 76935 2.0
(6) lock washers, (6) Nylock nuts
6 Impact Energy Absorber 42-60 IEA-42-60 76937 42.0
6a Impact Energy Absorber 72-96 IEA-72-96 76938 66.0
Replacement Bars and Bolt Kits Required

per Belt Width - DRX3000
in. 42 48 54 60 72 84 96
mm 1050 1200 1350 1500 1800 2100 2400
Slider Bars Required 2 2 4 4 4 4 4
Impact Bars Required 8 8 8 9 12 12 16
Impact Bar Supports Required 8 8 8 9 12 12 16
Impact Bar Bolt Kits Required 56 56 64 70 88 88 112
Dynamic Beds
and Guidelines
32"
(813mm)
27.7"
(703mm)
Dim A
Dim D
58.4"
1483mm
Dim B
Dim C 58.4"
1483mm
Dim B
Dim C
Bed Width Dim A Dim B Dim C Dim D

42 1050 51 1295.4 10.75 273 1.09 27.7 58.25 1479.6
48 1200 57 1447.8 10.75 273 1.09 27.7 64.25 1632.0
54 1350 63 1600.2 10.75 273 1.09 27.7 70.25 1784.4
60 1500 69 1752.6 10.75 273 1.09 27.7 76.25 1936.8
72 1800 81 2057.4 11.50 292.1 1.15 29.1 90.25 2292.4
84 2100 93 2362.2 11.75 298.5 1.15 29.1 102.25 2597.2
96 2400 105 2667.0 11.75 298.5 1.15 29.1 114.25 2902.0

Product Ordering DRX™ Impact Beds
Optional Parts and Tools
Information
Impact Bars with 1" UHMW

For impact beds that have heavy abrasive wear on the impact bars.
ORDERING ITEM WT.
4' Impact Bar with 1" UHMW IB4-1U 76965 17.0
5' Impact Bar with 1" UHMW IB5-1U 76966 21.2 1"
2"
Impact Bar with 1"

UHMW Cover
Impact Bar Bolt Kit for Other OEM Impact Beds*

1/2" carriage bolt, square washer, flat washer and Nylock nut to mount
DRX Impact Bars on other OEM beds that use 1/2" T-bolts.
Count cross stringers on OEM bed (example: 3 cross stringers require
3 Bolt Kits per impact bar)
ORDERING ITEM WT.
OEM Impact Bar Bolt Kit OIBBK 76950 0.5
*Kit includes 1 ea. bolt, square washer, flat washer and Nylock nut. Optional Impact Bar
Bolt Kit
Impact Bed Handy Wrench

A ratcheting wrench with 2 common socket sizes: 3/4" & 15/16" (19mm
& 24mm) for installation and maintenance of impact beds.
ORDERING ITEM WT.
Impact Bed Handy Wrench HW-IMPB 76939 1.6
Impact Bed Handy

Wrench
Selection Guidelines Belt Tracking Products
Belt Positioner™
MODEL APPLICATION RANGE
Return side only, 800 PIW max tension on Small,
Belt Positioner™ Medium and Large; 1200 PIW max tension on Extra
Large. Also works on reversing belts.
Medium-duty belts up to 1600 PIW max tension.
PTEZ™
PTEZ™ Also works on reversing belts. Belt width 18"-48"
(450 - 1200mm).
Medium-duty belts up to 1600 PIW max tension.
PT Smart™ Belt width 42" - 84" (050 - 2100mm). Belt thickness
1" (25mm) maximum.
Medium-duty belts up to 2400 PIW max tension. PT Smart™
HD PTEZ ™
Belt widths + 9" (225mm) idler. Belt thickness 1" Standard
(25mm) maximum. Also works on reversing belts.
Medium-duty belts 150 PIW min to 1600 PIW max
PT Pro™ tension. Belt width 18" - 72" (450 - 1800mm). Also
works on reversing belts. HD PTEZ™
Heavy-duty belts 300 PIW min to 2400 PIW max
HD PT Pro™ tension. Belt width 48" - 96" (1200 - 2400mm). Also
works on reversing belts.
Heavy-duty belts up to 3000 PIW max
PT Max™ Generally 3/4" to 1" thick (19mm to 25mm)
Belt width 24" - 60" (600 - 1500mm)
Heavy-duty belts up to 6000 PIW max tension. Belt PT Pro™
HD PT Max™
width 54" - 84" (1350 - 2100mm)
PT Max™
Top Side
PT Max™
Return Side
Heavy Heavy Heavy Super

Belt
Conveyor Criteria Positioner™
PTEZ™ Duty PT Smart™ PT Pro™ Duty PT Max™ Duty Duty
PTEZ™ PT Pro™ PT Max™ PT Max™
Top side mistracking No No No No No No Yes Yes Yes
Return side mistracking Yes Yes Yes Yes Yes Yes Yes Yes Yes
Reversing Yes Yes Yes No Yes Yes No No No
Belt mistracking to one side Better Better Better Better Better Better Better Better Better
Belt mistracking to both sides Acceptable Better Better Best Better Better Best Best Best
Inconsistent tracking problem Good Better Better Best Better Better Best Best Best
Belt is cupped (heavy) Best ‡ Better ‡ Better ‡ Better Better Better Better Better Better
Belt has edge damage Best Best Best Good Best Best Good Good Good
Ease of Installation Best Better Better Good Good Good Good Good Good
Belt has low running tension (150-300 PIW) Good Good Good Good Good N/A Good N/A N/A
Belt has medium running tension (300-1600 PIW) Better Better Better Better Better Better Best Best Best
Belt has high running tension (1600+ PIW) N/A N/A N/A N/A N/A Best Better Best Best
Approx. "upstream" effect*∆ 50' (15 M) 20' (6 M) 20' (6 M) 20' (6 M) 20' (6 M) 20' (6 M) 50' (15 M) 50' (15 M) 50' (15 M)
100' – 120' 100' – 120' 120' – 150' 100' – 120' 100' – 120' 150' – 200' 150' – 200' 150' – 200'
Approx. "downstream" effect*∆ 50' (15 M)
(30 – 36 M) (30 – 36 M) (36 – 45 M) (30 – 36 M) (30 – 36 M) (45 – 61 M) (45 – 61 M) (45 – 61 M)
‡ Installed on the clean side of the return belt
* Typical results; actual results may vary
∆ Disc idlers have the potential to reduce these numbers

Product Ordering Belt Positioner™
Information
Belt Positioners with Rubber Rollers

BELT WIDTH POSITIONER WIDTH
(Min-Max) (Min-Max) ORDERING ITEM WT.
SIZE in. mm in. mm NUMBER CODE LBS.
Small 18-24 450-600 24-34 600-850 RBP1R-S 90646 60.5
Medium 30-48 750-1200 34-56 850-1400 RBP1R-M 90647 73.5
Large 54-72 1350-1800 56-83 1400-2075 RBP1R-L 90648 94.0
Extra Large 72-96 1800-2400 72-120 1800-3000 RBP1R-XL 90649 182.0
Belt Positioners with Steel Rollers

(Min-Max) (Min-Max) ORDERING ITEM WT.
SIZE in. mm in. mm NUMBER CODE LBS.
Small 18-24 450-600 24-34 600-850 RBP1S-S 74558 69.8
Medium 30-48 750-1200 34-56 850-1400 RBP1S-M 74559 84.6
Large 54-72 1350-1800 56-83 1400-2075 RBP1S-L 74560 109.5
Extra Large 72-96 1800-2400 72-120 1800-3000 RBP1S-XL 74561 199.6
Use next larger size for belt widths between ranges.

NOTE: Idler Rollers on sizes S, M and L are 5" (125mm) diameter and rated CEMA D.
Idler Rollers on the XL size are 6" (150mm) diameter and rated CEMA E.
Product Notes:
• The Positioner should be centered between two standard return rollers. For general applications–standard belts up to
72" (1800mm): position the unit no closer than 3' (.9M) to a return roller and no farther than 6' (1.8M).
• Works on the return side of the conveyor using simple angled rollers mounted in a fixed position to quickly and
continuously funnel the belt into the correct path.
• A “quick fix” solution for belts that consistently wander to one side.
• Typically installed before the tail pulley to keep the belt centered at the critical loading point. Center loading is the key
to solving many top side tracking problems.
• Idler rollers make smooth contact with the return belt’s bottom cover, eliminating excessive wear and damage to the
belt’s edges.
• Has no pivoting mechanism to freeze up and cause the unit to stop working.
• Once installed, no further adjustment is required.
Specifications Belt Positioner™
& Guidelines

(Min-Max) (Min-Max)
SIZE in. mm in. mm
Small 18-24 450-600 24-34 600-850
Medium 30-48 750-1200 34-56 850-1400
Large 54-72 1350-1800 56-83 1400-2075
Extra Large 72-96 1800-2400 72-120 1800-3000
Use next larger size for belt widths between ranges.
Application Guidelines 13 1/2" (338 mm) Max

Adjustment Range
• Belt Splice............................................ Mechanically Fastened/Vulcanized
• Belt Speed............................................ 1000 FPM (5m/s)
• Belt Direction....................................... Reversing
Roller Specifications Roller Dimensions

SPECIFICATION Rubber Steel LENGTH DIAMETER
Material STEEL and 3/8" RUBBER STEEL SIZE in. mm in. mm
Durometer 60 N/A Small 9 225 5 125
CEMA D CEMA D Medium 13 325 5 125
Rating
(XL is CEMA E) (XL is CEMA E)
Large 19 475 5 125
Bearings 6305 Sealed Ball Bearing 6305 Sealed Ball Bearing
Extra Large 21 525 6 150
Shaft Diameter 1" (25mm) 1" (25mm)
9 Gauge (.148) 9 Gauge (.148)
Wall Thickness
(XL - 1/4") (XL - 1/4") Product Notes:
Specific Gravity Over 1 Over 1 • Optimal location: no closer than 3' (.9M) and no
-4° to 220° F -4° to 220° F further than 6' (1.8M) from a return roller.
Working Temperature
-20° to 104° C -20° to 104° C • All rollers are “sealed for life”. No regreasing
Grease & Chemical
Good Good
maintenance is required.
Resistance • MSHA approved.
Sticky Material
Excellent Good
Performance

Replacement Belt Positioner™
Parts List
1
3
2
4a
4b
5
Replacement Parts
BELT WIDTH
(Min-Max) ORDERING ITEM WT.
Small Frame Kit* (1 ea.) 18-24 450-600 RBPFK-S 75522 12.5
Medium Frame Kit* (1 ea.) 30-48 750-1200 RBPFK-M 75523 14.5
1
Large Frame Kit* (1ea.) 54-72 1350-1800 RBPFK-L 75524 19.5
Extra Large Frame Kit* (1 ea.) 72-96 1800-2400 RBPFK-XL 75525 28.5
2 Mounting Bracket Kit* (1 ea.) RBPMBK 75526 6.0
Small Inner Tube (1 ea.) 18-24 450-600 RBPIT-S 75527 3.0
Medium Inner Tube (1 ea.) 30-48 750-1200 RBPIT-M 75528 4.5
3
Large Inner Tube (1 ea.) 54-72 1350-1800 RBPIT-L 75529 6.5
Extra Large Inner Tube (1 ea.) 72-96 1800-2400 RBPIT-XL 75530 9.0
* Hardware included
Replacement Rollers
ORDERING ITEM WT.
Small Rubber Roller RBPRR-S 90650 7.9
Medium Rubber Roller RBPRR-M 90651 11.0
4a
Large Rubber Roller RBPRR-L 90652 15.5
Extra Large Rubber Roller RBPRR-XL 90653 27.8
Small Steel Roller RBPSR-S 74562 12.2
Medium Steel Roller RBPSR-M 74563 16.5
4b
Large Steel Roller RBPSR-L 74564 23.2
Extra Large Steel Roller RBPSR-XL 74565 36.6
5 Roller Retainer Kit* RBPRET 73163 0.5
Idler rollers on sizes S, M and L are 5" (125mm) diameter and rated CEMA D.
Idler rollers on the XL size are 6" (150mm) diameter and rated CEMA E.
*Roller Retainer Kit not required for XL rollers (SDX style).
Product Ordering PTEZ™
Belt Trainer
Information
HD PTEZTM BELT TRAINER
PTEZ™ Belt Trainer
18 450 PTEZ-18 90265 120.0
24 600 PTEZ-24 90266 130.0
30 750 PTEZ-30 90267 140.0
36 900 PTEZ-36 90268 150.0
42 1050 PTEZ-42 90269 160.0
48 1200 PTEZ-48 90270 170.0
PTEZTM BELT TRAINER
HD PTEZ™ Belt Trainer HD PTEZ™ UG Belt Trainer

BELT WIDTH ORDERING ITEM WT. BELT WIDTH ITEM WT.
in. mm NUMBER CODE LBS. in. mm ORDERING NUMBER CODE LBS.
42 1050 PTEZHD-42/1050 90616 228.0 42 1050 PTEZHD-42/1050-UG 90798 230.0
48 1200 PTEZHD-48/1200 90617 252.0 48 1200 PTEZHD-48/1200-UG 90799 254.0
54 1350 PTEZHD-54/1350 90618 277.0 54 1350 PTEZHD-54/1350-UG 90800 279.0
56 1400 PTEZHD-56/1400 90795 285.0 60 1500 PTEZHD-60/1500-UG 90801 303.0
60 1500 PTEZHD-60/1500 90619 301.0 72 1800 PTEZHD-72/1800-UG 90802 351.0
64 1600 PTEZHD-64/1600 90796 317.0
72 1800 PTEZHD-72/1800 90620 349.0
80 2000 PTEZHD-80/2000 90797 382.0
84 2100 PTEZHD-84/2100 90621 398.0
Product Notes:
• Simple adjustable mounting brackets ensure quick and accurate installation.
• Urethane roller cover ensures long-lasting performance.
• Works in multiple applications, yet economical. Single-direction and reversing belts. Wet or dry conditions. Belts with edge
damage or wear. Belts mistracking to one or both sides.
• Easy ordering and installation. Enhanced to meet instant demands for training solutions, the PTEZ is available on a one-
working-day lead time. The simple brackets and component construction also ensure a quick and easy installation.
• Uses tapered and patterned roller to activate the trainer movement. Pivot influences direction while Tilt increases the tension
on the mistracked side–the result is two forces quickly moving the belt back to center.
• Works with mechanically fastened or vulcanized belts.
Replacement PTEZTM BELT TRAINER

Parts List
1
2
7 8
PTEZ™ Replacement Parts
ORDERING ITEM WT.
REF DESCRIPTION
NUMBER CODE LBS.
1 PTEZ Mounting Bracket Kit (2 ea.) PTEZMB 90351 8.0 3
2 PTEZ Pole Bracket Kit (2 ea.) PTEZPB 90352 6.0
HD PTEZTM BELT TRAINER
3 PTEZ Dust Cover Kit (2 ea.) PTEZDC 90353 1.0 4
4 PTEZ HD Mount Bracket Kit (2 ea.) PTEZHD-MBK 90803 19.0
5 PTEZ HD Pole Bracket Kit (2 ea.) PTEZHD-PBK 90804 8.0
6 PTEZ HD Dust Cover Kit (2 ea.) PTEZHD-DCK 90805 1.0
5
7 PTEZ HD Wire Rope Bolt Kit (2 ea.) PTEZHD-WRBK 90806 1.0
8 PTEZ HD J Bolt Bracket Kit (2 ea.) PTEZHD-JBBK 90807 2.0
*Bracket set for 1 roller
6

194
.78in
19.8mm
P R O D U C T
4.00in 8.00in
102mm 203mm
& Guidelines
H A N D B O O K
Specifications
DIM "B"
DIM "A"
1.00 TYP
1.50
7.00
PART BELT
DIM "B"
NUMBER WIDTH DIM "A"
18.75" 36"
90265 18" [476mm] [914mm]
90266 24" 24.75" 42"
[629mm] [1067mm]
90267 30" 30.75" 48"
[781mm] [1219mm]
90268 36.75"
36" [933mm] 54"
[1372mm]
42.75 60"

90269 42" [1086mm] [1524mm]
90270 48" 48.75 66"
[1238mm] [1676mm]
Belt Trainer
PTEZ™
Specifications HD PTEZ™
Belt Trainer
& Guidelines
CODE
ITEM
ORDER NUMBER
SPECIFICATIONS
72
1391
BELT WIDTH
72

Specifications HD PTEZ™ Underground
Belt Trainer
& Guidelines
SPECIFICATIONS
CODE
ITEM
ORDER NUMBER
72
1391
BELT WIDTH
72
Product Ordering PT Smart™
Belt Trainer
Information
PT Smart™ Belt Trainer

BELT TRAINER COMPLETE REPLACEMENT ROLLERS
in. mm NUMBER CODE LBS. NUMBER CODE LBS. PT SMARTTM STANDARD
18 450 PTS-18R 77664 121.0 PTS-RR21 77680 22.0 BELT TRAINER
24 600 PTS-24R 77665 141.0 PTS-RR27 77681 27.0 (Roller Included)
30 750 PTS-30R 77666 154.0 PTS-RR33 77682 32.2
36 900 PTS-36R 77667 169.0 PTS-RR39 77683 36.0
42 1050 PTS-42R 77668 186.0 PTS-RR45 77684 41.5
48 1200 PTS-48R 77669 197.0 PTS-RR51 77685 45.0
54 1350 PTS-54R 77670 210.0 PTS-RR57 77686 47.5
60 1500 PTS-60R 77671 224.0 PTS-RR63 77687 53.0
72 1800 PTS-72R 77672 242.0 PTS-RR75 77689 57.0
PT Smart™ Underground Structure Belt Trainer

BELT TRAINER COMPLETE REPLACEMENT ROLLERS
in. mm NUMBER CODE LBS. NUMBER CODE LBS. PT SMARTTM
30 750 PTS-30R-UG 77673 174.0 PTS-RR39 77683 36.0 UNDERGROUND STRUCTURE
36 900 PTS-36R-UG 77674 188.0 PTS-RR45 77684 41.5 BELT TRAINER
42 1050 PTS-42R-UG 77675 196.0 PTS-RR51 77685 45.0 (Roller Included)
48 1200 PTS-48R-UG 77676 208.0 PTS-RR57 77686 47.5
54 1350 PTS-54R-UG 77677 220.0 PTS-RR63 77687 53.0
60 1500 PTS-60R-UG 77678 255.0 PTS-RR69 77688 57.0
72 1800 PTS-72R-UG 77679 265.0 PTS-RR81 77690 81.0

Specifications PT Smart™
Belt Trainer
& Guidelines
A
2" (50mm)
1" (25mm)
3" (75mm)
5"
(125mm)
B
12-3/8"
19-1/2" PT Smart Standard (310mm)
(488 mm)
BELT WIDTH D
D ITEM (vertical
in. mm CODE A B C adjustment)
18 450 77664 23-35" (575-875mm) 10-23" (250-575mm)
24 600 77665 29-41" (725-1025mm) 16-29" (400-725mm)
30 750 77666 35-47" (875-1175mm) 22-35" (550-875mm)
36 900 77667 41-53" (1025-1325mm) 28-41" (700-1025mm)
10" 0"-10"
42 1050 77668 47-59" (1175-1475mm) 33-47" (825-1175mm)
(250mm) (0-250mm)
C 48 1200 77669 53-65" (1325-1625mm) 40-53" (1000-1325mm)
54 1350 77670 59-71" (1475-1775mm) 46-59" (1150-1475mm)
60 1500 77671 65-77" (1625-1925mm) 52-65" (1300-1625mm)
72 1800 77672 77-89" (1925-2225mm) 64-77" (1600-1925mm)
A 3-1/8" (79mm)
1" (25mm)
3" (75mm)
5"
(125mm)
B
15-3/8"
(384mm)
19-1/2" PT Smart Underground Structure

(488 mm) BELT WIDTH ITEM
in. mm CODE A B C D
D 30 750 77673 35-47" (875-1175mm) 27-40" (675-1000mm)
36 900 77674 41-53" (1025-1325mm) 33-46" (825-1150mm) 2-3/4" to
42 1050 77675 47-59" (1175-1475mm) 39-52" (975-1300mm) 10" 13-1/4"
48 1200 77676 53-65" (1025-1625mm) 45-58" (1125-1450mm) (250mm) (69mm to
54 1350 77677 59-71" (1475-1775mm) 51-64" (1275-1600mm) 331mm)
60 1500 77678 65-77" (1625-1925mm) 57-70" (1425-1750mm)

2-1/4" to
10-1/2" 12-3/4"
C 72 1800 77679 77-89" (1925-2225mm) 69-82" (1725-2050mm)
(262mm) (56mm to
319mm)
Replacement PT Smart™
Belt Trainer
Parts List
5 9
10
For replacement rollers

see page page 197.
7a
7
6 8
1a
1
5
4
2
4a
Replacement Parts
ORDERING ITEM WT.
REF DESCRIPTION NUMBER CODE LBS. 3
1 PTS STD Sensor Roller (2") PTS-SR 77691 3.6 3a
1a PTS HD Sensor Roller (3") PTS-HDSR 77692 12.0
2 PTS Sensor Arm Kit (incl. 1 ea.) PTS-SAK 77694 2.5
3 PTS RH Sensor Adjuster Assy PTS-RHSAA 77755 4.7
3a PTS LH Sensor Adjuster Assy PTS-LHSAA 77756 4.7
4 PTS Idler Bracket Kit (incl. L & R) PTS-IBK 77696 5.9
4a PTS HD Idler Bracket Kit (incl. L & R) PTS-HIBK 77697 6.2
5 PTS Pivot Shield PTS-PS 77698 1.8
6 PTS Pivot Assy (Axle and housing) PTS-PA 77699 6.9
7 PTS Mounting Bracket Kit PTS-MBK 77700 8.8
7a PTS Mounting Bracket Kit U/G PTS-MBKUG 77701 11.4
8 PTS Extending Bracket Kit (incl. L & R) PTS-EBK 77702 12.9
9 Roller Retainer Kit RBPRET 73163 1.0
10 Delrin Roll Kit (2 kits plus hardware) PTS-DRK 90100 1.5
- Wire Mount Kit (not pictured) PTS-WMK 78767 11.5
*Hardware included

Product Ordering PT Pro™
Belt Trainer
Information
PT PROTM
BELT TRAINER
(Rollers Included)
PT Pro™ Belt Trainer

BELT TRAINER COMPLETE REPLACEMENT ROLLERS*
VERSION in. mm NUMBER CODE LBS. NUMBER CODE LBS.
18 450 PTP18R 79267 263.6 NS6DV-18-9.625-A45 26714 17.0
24 600 PTP24R 79268 284.8 NS6DV-24-12.625-A45 26715 19.0
30 750 PTP30R 79269 300.9 NS6DV-30-15.625-A45 26716 21.0
36 900 PTP36R 79270 330.3 NS6DV-36-18.625-A45 26717 29.6
Standard 42 1050 PTP42R 79271 347.9 NS6DV-42-21.625-A45 26718 32.2
48 1200 PTP48R 79272 365.4 NS6DV-48-24.625-A45 26719 35.0
54 1350 PTP54R 79273 383.0 NS6DV-54-27.625-A45 26720 37.7
60 1500 PTP60R 79274 400.6 NS6DV-60-30.625-A45 26721 40.4
72 1800 PTP72R 79275 435.7 NS6DV-72-36.625-A45 26722 45.7
48 1200 PTPHD48R 79276 475.0 NS7EV-48-24.625-A105 26723 46.3
54 1350 PTPHD54R 79277 500.8 NS7EV-54-27.625-A105 26724 49.7
Heavy- 60 1500 PTPHD60R 79278 526.7 NS7EV-60-30.625-A105 26725 53.0
Duty 72 1800 PTPHD72R 79279 578.0 NS7EV-72-36.625-A105 26726 59.7
84 2100 PTPHD84R 79280 663.2 NS7EV-84-42.625-A105 26727 77.0
96 2400 PTPHD96R 79281 703.5 NS7EV-96-48.625-A105 26728 85.8
*Pricing is for one roller
Product Notes:
• Works in multiple applications. Single-direction and reversing belts. Heavy-duty or medium duty operations.
Wet or dry conditions. Belts with edge damage/wear. Belts mistracking to one side or both sides. Whatever the
issue, PT Pro has the solution.
• Easy ordering and installation. Enhanced to meet instant demands for belt training solutions, core sizes of the
PT Pro are available on a one-working-day lead time. The simple brackets and component construction also
ensures a quick and easy installation.
• Uses tapered rolls to activate the trainer movement. Rollers drop in with no tools needed.
• Works with mechanically-fastened or vulcanized belts.
Specifications PT Pro™
Belt Trainer
& Guidelines
PT Pro Standard
SPECIFICATIONS PT PRO RETURN
BELT WIDTH IDLER LENGTH 'A' ORDER ITEM
(in) (mm) (in) (mm) NUMBER CODE
508 502 18 450 9.63 245 PTP18R 79267
20.00 19.75 24 600 12.63 321 PTP24R 79268
30 750 15.63 397 PTP30R 79269
36 900 18.63 473 PTP36R 79270
42 1050 21.63 549 PTP42R 79271
108 WIDTH ADJUSTMENT RANGE 48 1200 24.63 626 PTP48R 79272
54 1350 27.63 702 PTP54R 79273
4.25 MIN BELT WIDTH + 9" (229mm) MIN
60 1500 30.63 778 PTP60R 79274
CLEARANCE BELT WIDTH + 15" (381mm) MAX 72 1800 36.63 930 PTP72R 79275
BOTH SIDES 279
11.00
152 HEIGHT 251

DIM "A" ADJUSTMENT
6.00 RANGE 9.88
57 215
406 2.25
546 8.48
16.00
21.50
76
3.00
381
HEIGHT 15.0 MINIMUM
ADJUSTMENT CLEARANCE REQUIRED
RANGE
PT Pro Heavy Duty

PT PRO RETURN
SPECIFICATIONS
SIDE HD
BELT WIDTH IDLER LENGTH 'A' ORDER ITEM
(in) (mm) (in) (mm) NUMBER CODE
546 527 48 1200 24.625 625 PTPHD48R 79276
21.50 20.75 54 1350 27.625 702 PTPHD54R 79277
60 1500 30.625 778 PTPHD60R 79278
72 1800 36.625 930 PTPHD72R 79279
84 2100 42.625 1083 PTPHD84R 79280
108 96 2400 48.625 1235 PTPHD96R 79281
WIDTH ADJUSTMENT RANGE
4.25 MIN
BELT WIDTH + 9" (229mm) MIN
CLEARANCE
BELT WIDTH + 15" (381mm) MAX
BOTH SIDES
241
9.50
178 HEIGHT
DIM "A" 7.00 ADJUSTMENT
RANGE
273
64 215
457 10.75
2.50 8.48
533 18.00
21.00 89
3.50
432
17.0 MINIMUM
HEIGHT
CLEARANCE REQUIRED
ADJUSTMENT
RANGE

Replacement PT Pro™
Belt Trainer
Parts List
1a
1 5
6a
6
7a 7 4a 4 2a 2
Replacement Parts
BELT
WIDTH ORDERING ITEM WT.
REF in. mm DESCRIPTION NUMBER CODE LBS.
18 450 PTPR Idler 18" (450mm) NS6DV-18-9.625-A45 26714 17.0
1 42 1050 PTPR Idler 42" (1050mm) NS6DV-42-21.625-A45 26718 32.2
48 1200 PTPR HD Idler 48" (1200mm) NS7EV-48-24.625-A105 26723 46.3
1a
2 PT Pro Link Bar* PTPLB 79470 11.6
2a PT Pro HD Link Bar* PTPLB-HD 79473 14.3
3 PT Pro Link Shield PTP-LS 79488 .2
4 PT Pro Pivot Assy PTP-RPA 79476 13.0
4a PT Pro HD Pivot Assy PTP-HDRPA 79478 14.4
5 PT Pro Mounting Bracket PTP-RMB 79490 22.4
6 PT Pro Extension Bracket Kit PTP-EBKR 79484 29.6
6a PT Pro HD Extension Bracket Kit PTP-HDEBKR 79486 36.0
7 PT Pro Roller Bracket Kit** PTP-RRB 79491 5.9
7a PT Pro HD Roller Bracket Kit** PTP-HDRBK 79492 7.3
*Set of 4
**Bracket set for 1 roller
Product Ordering PT Max™
Belt Trainer (Mild Steel)
Information
PT Max™ Top Side
VERSION in. mm NUMBER CODE LBS.
24 600 PTM24T 75583 280.0
30 750 PTM30T 74885 295.0
36 900 PTM36T 74886 310.0
Standard 42 1050 PTM42T 74887 325.0
48 1200 PTM48T 74888 340.0
54 1350 PTM54T 74889 355.0
60 1500 PTM60T 74890 370.0
54 1350 PTMHD54T 74891 390.0
Heavy- 60 1500 PTMHD60T 74892 410.0
Duty 72 1800 PTMHD72T 74893 430.0 PT MAX™ TOP SIDE
84 2100 PTMHD84T 74894 450.0 BELT TRAINER
72 1800 PTMSD72T 74895 828.1
(Rollers supplied by end user)
Super- 84 2100 PTMSD84T 74896 876.8
Duty 96 2400 PTMSD96T 74897 925.5
120 3000 PTMSD120T 74898 1022.9
PT Max Return Side

24 600 PTM24R 75584 330.0
30 750 PTM30R 74899 340.0
36 900 PTM36R 74900 350.0
Standard 42 1050 PTM42R 74901 370.0
48 1200 PTM48R 74902 380.0
54 1350 PTM54R 74903 400.0
60 1500 PTM60R 74904 420.0 PT MAX RETURN SIDE
54 1350 PTMHD54R 74905 510.0 BELT TRAINER
Heavy- 60 1500 PTMHD60R 74906 520.0 (Rollers supplied by end user)
Duty 72 1800 PTMHD72R 74907 580.0
84 2100 PTMHD84R 74908 610.0
72 1800 PTMSD72R 74909 992.7
Super- 84 2100 PTMSD84R 74910 1051.1
Duty 96 2400 PTMSD96R 74911 1109.5
120 3000 PTMSD120R 74912 1226.3
PT Max V-Return
24 600 PTM24VR 79669 310.0
30 750 PTM30VR 79670 320.0
36 900 PTM36VR 79671 330.0
Standard 42 1050 PTM42VR 79672 350.0
48 1200 PTM48VR 79673 360.0
54 1350 PTM54VR 79674 370.0
60 1500 PTM60VR 79675 390.0 PT MAX V-RETURN
54 1350 PTMHD54VR 79665 470.0 BELT TRAINER
Heavy- 60 1500 PTMHD60VR 79666 480.0 (Rollers supplied by end user)
Duty 72 1800 PTMHD72VR 79667 560.0
84 2100 PTMHD84VR 79668 600.0
72 1800 PTMSD72VR 90051 935.0
Super- 84 2100 PTMSD84VR 90052 990.0
Duty 96 2400 PTMSD96VR 90053 1045.0
120 3000 PTMSD120VR 90054 1155.0

Product Ordering Stainless Steel PT Max™
Belt Trainer
Information
PT Max™ Top Side
24 600 PTM24T-S/S 90001 302.4
30 750 PTM30T-S/S 90002 318.6
36 900 PTM36T-S/S 90003 334.8
Standard 42 1050 PTM42T-S/S 90004 351.0
48 1200 PTM48T-S/S 90005 367.2
54 1350 PTM54T-S/S 90006 383.4
60 1500 PTM60T-S/S 90007 399.6
54 1350 PTMHD54T-S/S 90008 421.2
Heavy- 60 1500 PTMHD60T-S/S 90009 442.8 PT MAX™ TOP SIDE
Duty 72 1800 PTMHD72T-S/S 90010 464.4 BELT TRAINER
84 2100 PTMHD84T-S/S 90011 486.0 (Rollers supplied by end user)
72 1800 PTMSD72T-S/S 90034 894.3
Super- 84 2100 PTMSD84T-S/S 90035 946.9
Duty 96 2400 PTMSD96T-S/S 90036 999.5
120 3000 PTMSD120T-S/S 90037 1104.8
PT Max Return Side

24 600 PTM24R-S/S 90012 356.4
30 750 PTM30R-S/S 90013 367.2
36 900 PTM36R-S/S 90014 378.0
Standard 42 1050 PTM42R-S/S 90015 399.6
48 1200 PTM48R-S/S 90016 410.4
54 1350 PTM54R-S/S 90017 432.0
60 1500 PTM60R-S/S 90018 453.6
54 1350 PTMHD54R-S/S 90019 550.8 PT MAX RETURN SIDE
Heavy- 60 1500 PTMHD60R-S/S 90020 561.6 BELT TRAINER
Duty 72 1800 PTMHD72R-S/S 90021 626.4 (Rollers supplied by end user)
84 2100 PTMHD84R-S/S 90022 658.8
72 1800 PTMSD72R-S/S 90038 1072.1
Super- 84 2100 PTMSD84R-S/S 90039 1135.2
Duty 96 2400 PTMSD96R-S/S 90040 1198.3
120 3000 PTMSD120R-S/S 90041 1324.4
PT Max V-Return
24 600 PTM24VR-S/S 90023 334.8
30 750 PTM30VR-S/S 90024 345.6
36 900 PTM36VR-S/S 90025 356.4
Standard 42 1050 PTM42VR-S/S 90026 378.0
48 1200 PTM48VR-S/S 90027 388.8
54 1350 PTM54VR-S/S 90028 399.6
60 1500 PTM60VR-S/S 90029 421.2
54 1350 PTMHD54VR-S/S 90030 507.6 PT MAX V-RETURN
Heavy- 60 1500 PTMHD60VR-S/S 90031 518.4 BELT TRAINER
Duty 72 1800 PTMHD72VR-S/S 90032 604.8 (Rollers supplied by end user)
84 2100 PTMHD84VR-S/S 90033 648.0
72 1800 PTMSD72VR-S/S 90042 1009.8
Super- 84 2100 PTMSD84VR-S/S 90043 1069.2
Duty 96 2400 PTMSD96VR-S/S 90044 1128.6
120 3000 PTMSD120VR-S/S 90045 1247.4
Specifications PT Max™
Belt Trainer
& Guidelines
Top of Roller to Bottom of PT Max™ Minimum Clearance Needed

TOPSIDE RETURN SIDE V-RETURN
ROLL
DIAMETER Standard Heavy-Duty Super-Duty Standard Heavy-Duty Super-Duty Standard Heavy-Duty Super-Duty
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
5 127 16 406 17 432 22.25 570 17 432 18 457 22.75 580 16 406 17 432 22.25 570
6 152 17 432 18 457 23.25 590 18 457 19 483 23.75 600 17 432 18 457 23.25 590
7 178 18 457 19 483 24.25 620 19 483 20 508 24.75 630 18 457 19 483 24.25 620
Topside Clearance Return Side Clearance V-Return Clearance

Replacement PT Max™
Belt Trainer (Mild Steel)
Parts List
5a
5
2a
1a 2
1
L1 L2
3a 3b
3
L3a
7a L3
7
8b
8a
8
6a
6 4
L4
9
9a
9b
Replacement Parts
1 Sensor Roller 2.0* (3" solid roller) (1 ea.) 30-84 750-2100 MSR2 79378 7.0
1a Sensor Roller Super Duty* (1 ea.) 72-120 1800-3000 MSRSD 74915 9.9
For PT Max™
2 Swivel Mount Kit 2.0* 30-84 750-2100 PMSMK2 79380 5.5 Units Shipped
2a Swivel Mount Kit Super Duty* 72-120 1800-3000 PMSMKSD 74917 7.5 after March 17,
3 Adjusting Arm Kit 2.0* 30-60 750-1500 MAK2 79381 7.9 2014 ONLY. See
below for legacy
3a Adjusting Arm Kit Heavy Duty 2.0* 54-84 1350-2100 MAKHD2 79382 14.7
replacement parts.
3b Adjusting Arm Kit Super Duty* 72-120 1800-3000 MAKSD 74920 21.0
4 Frame Arm Set Screw Kit HD (incl. 2 set screws and 2 jam nuts) 30-120 750-3000 MFASKHD 79571 0.8
Outer Roller Kit*
5 30-84 750-2100 MORK 74921 2.6
(incl. 2 rollers, roller thimbles and bolts, nuts and washers)
Outer Roller Kit Super Duty*
5a 72-120 1800-3000 MORKSD 74922 4.0
6 Center Roller Kit* (incl. 2 rollers, 2 washers, and 2 cotter pins) 30-84 750-2100 MCRK 74923 1.2
6a Center Roller Kit Super Duty* (incl. 2 rollers, 2 washers, and 2 cotter pins) 72-120 1800-3000 MCRKSD 74924 1.8
7 Center Bearing* 30-84 750-2100 MCB 74925 1.7
7a Center Bearing Super Duty* 72-120 1800-3000 MCBSD 74926 3.0
8 Center Shaft Spacer Kit (incl. 2 spacers) 30-60 750-1500 MCSK 74927 0.3
8a Center Shaft Spacer Kit Heavy Duty (incl. 2 spacers) 54-84 1350-2100 MCSKHD 74928 0.5
8b Center Shaft Spacer Kit Super Duty (incl. 2 spacers) 72-120 1800-3000 MCSKSD 74929 2.4
9 Center Shaft 30-60 750-1500 MCS 74930 4.0
9a Center Shaft Heavy Duty 54-84 1350-2100 MCSHD 74931 13.0
9b Center Shaft Super Duty 72-120 1800-3000 MCSSD 74932 14.5
- Center Bearing Kit (incl. 1 ea. items 6, 7, 8, 9) 30-60 750-1500 MCBK 76025 8.0
- Center Bearing Kit Heavy Duty (incl. 1 ea. items 6, 7, 8a, 9a) 54-84 1350-2100 MCBKHD 76026 17.0
- Center Bearing Kit Super Duty (incl. 1 ea. items 6a, 7a, 8b, 9b) 72-120 1800-3000 MCBKSD 76027 19.0
*Hardware included
Note: All replacement parts offered are common to all three PT Max models: Top Side, Return Side, and V-Return.
Legacy Replacement Parts - For PT Max Units Shipped Prior to March 17, 2014
L1 Sensor Roller* (3" solid roller) (1 ea.) 30-84 750-2100 MSR 74914 7.0
L2 Swivel Mount Kit* 30-84 750-2100 PMSMK 74916 5.5
L3 Adjusting Arm Kit* 30-60 750-1500 MAK 74918 7.9
L3a HD Adjusting Arm Kit* 54-84 1350-2100 MAKHD 74919 14.7
Frame Arm Set Screw Kit
L4 30-120 750-3000 MFASK 75531 0.8
(incl. 2 set screws and 2 jam nuts)
*Hardware included
Replacement Stainless Steel PT Max™
Belt Trainer
Parts List
5a 2a
5 1a 2
1
3a 3b
3
7a
7
8b
8a
8
6a 4
6
9
9a
9b
Replacement Parts
1 Sensor Roller 2.0* (3" solid roller) (1 ea.) 30-84 750-2100 MSR2-S/S 90046 7.6
1a Sensor Roller Super Duty 72-120 1800-3000 MSRSD-S/S 90055 10.7
2 Swivel Mount Kit 2.0* 30-84 750-2100 PMSMK2-S/S 90047 5.9
2a Swivel Mount Kit Super Duty* 72-120 1800-3000 PMSMKSD-S/S 90056 8.1
3 Adjusting Arm Kit 2.0* 30-60 750-1500 MAK2-S/S 90048 8.5
3a Adjusting Arm Kit Heavy Duty 2.0* 54-84 1350-2100 MAKHD2-S/S 90049 15.9
3b Adjusting Arm Kit Super Duty* 72-120 1800-3000 MAKSD-S/S 90057 22.7
Frame Arm Set Screw Kit HD
4 30-120 750-3000 MFASKHD-S/S 90050 0.9
(incl. 2 set screws and 2 jam nuts)
Outer Roller Kit*
5 30-84 750-2100 MORK 74921 2.6
Outer Roller Kit Super Duty*
5a 72-120 1800-3000 MORKSD 74922 4.0
Center Roller Kit*
6 30-84 750-2100 MCRK 74923 1.2
(incl. 2 rollers, 2 washers, and 2 cotter pins)
Center Roller Kit Super Duty*
6a 72-120 1800-3000 MCRKSD 74924 1.8
(incl. 2 rollers, 2 washers, and 2 cotter pins)
7 Center Bearing* 30-84 750-2100 MCB 74925 1.7
7a Center Bearing Super Duty* 72-120 1800-3000 MCBSD 74926 3.0
8 Center Shaft Spacer Kit (incl. 2 spacers) 30-60 750-1500 MCSK 74927 0.3
8a Center Shaft Spacer Kit Heavy Duty (incl. 2 spacers) 54-84 1350-2100 MCSKHD 74928 0.5
8b Center Shaft Spacer Kit Super Duty (incl. 2 spacers) 72-120 1800-3000 MCSKSD 74929 2.4
9 Center Shaft 30-60 750-1500 MCS 74930 4.0
9a Center Shaft Heavy Duty 54-84 1350-2100 MCSHD 74931 13.0
9b Center Shaft Super Duty 72-120 1800-3000 MCSSD 74932 14.5
- Center Bearing Kit (incl. 1 ea. items 6, 7, 8, 9) 30-60 750-1500 MCBK 76025 8.0
- Center Bearing Kit Heavy Duty (incl. 1 ea. items 6, 7, 8a, 9a) 54-84 1350-2100 MCBKHD 76026 17.0
- Center Bearing Kit Super Duty (incl. 1 ea. items 6a, 7a, 8b, 9b) 72-120 1800-3000 MCBKSD 76027 19.0
*Hardware included
Note: All replacement parts offered are common to all three PT Max models: Top Side, Return Side, and V-Return.

Product Ordering Standard Urethane Skirting
Information
Standard Urethane Skirting

Height Thickness Length ORDERING ITEM WT.
in mm in mm ft m CHAMFER NUMBER CODE LBS.
6 150 1/2 12 SKPU-6x1/2x25 90283 40.0
6 150 3/4 20 SKPU-6x3/4x25 90284 60.0
25 7.6 35°
8 200 1/2 12 SKPU-8x1/2x25 90285 58.0
8 200 3/4 20 SKPU-8x3/4x25 90286 86.0
Product Notes:
• Urethane skirting offers a more wear-resistant material than typical rubber, often providing as much as 3-4 times the
wear life in similar applications. The lower coefficient of friction reduces strain on the system.
• Works with Flexco series of skirt clamps that offer simple serviceability: RMC1/PAL-Pak, Flex-Lok, and Flex-Seal.
• Uses soft durometer (65A) urethane with exceptional tear resistance to ensure a good seal and long belt life.
• 25' (7.6M) roll size ensures easy transportation, while the 35° chamfer eliminates the typical skirting break-in period.
• Suitable for most applications: single direction or reversing belts, wet or dry conditions, old or new belts, vulcanized
or mechanically-spliced systems.
• Rated for temperatures from -20°F to 180°F (-30°C to 82°C)
Product Ordering RMC1
Skirt Clamps
Information
RMC1 Skirt Clamps*
ORDERING ITEM WT.
Skirt Clamp RMC1 75817 11.6
LS Skirt Clamp RMC1-LS 75834 10.4
Skirt Clamp Bulk‡ RMC1-BULK 75833 11.6
*Includes two clamp plates (Standard or LS - Limited Space), two clamp pins,
and one 4' (1.2M) clamp bar.
‡Minimum order of 50 pieces for Bulk Pack pricing.
RMC1 Skirt Clamp
Skirt board and rubber not included. (Standard)
Skirt Rubber Thickness Range: 5/16" to 3/4" (8mm to 19mm).
Anti-Vibration Clamp Pins

PAL PAKs
The Pick-A-Length (PAL) PAK contains 2 clamp plates and 2 clamp pins.
You supply the clamp bar (1" x 1" x 1/8" angle) to your required length.
PAL PAKS PER SYSTEM LENGTH
1' - 4' 5' - 8' 9' - 12' 13' - 16' 17' - 20'
Skirting System Length
(0.3-1.2M) (1.5-2.4M) (2.8-3.8M) (4.0-4.9M) (5.2-6.1M)
PAL PAKs Needed 1 2 3 4 5
ORDERING ITEM WT.

PAL PAK RMC1-PP 75832 6.6
LS PAL PAK RMC1-LSPP 75836 5.4
Bolt-On PAL PAK RMC1-BPP 76415 6.5
Bolt-On LS PAL PAK RMC1-LSBPP 76538 5.3
PAL PAK (Standard) Bolt-On PAL PAK

(Standard)
Replacement Parts
ORDERING ITEM WT.
7"
Clamp Pin RMC1-CP 75819 1.1
4.5" 2.5" 4"
Bolt-On Clamp Pin RMC1-BCP 76414 1.0
Clamp Plate RMC1-PL 75821 2.1
LS Clamp Plate RMC1LS-PL 75835 1.5
Clamp Bar RMC1-CB 75820 4.0
LS Standard
(Limited Space)
Two models are available to fit your

conveyor requirements.
Product Notes:
• Solves material spillage problems in the conveyor loading zone.
• Stops material loss, eliminates safety hazards, and reduces wear on conveyor components.
• LS (Limited Space) model for restricted space areas and for portable equipment.
• Pick-A-Length (PAL) PAK option for special or longer length requirements.
• Bolt-on Clamp Pins eliminate welding on applications where sparking can be a safety hazard.
• Anti-Vibration (standard) Clamp Pin stays locked even in applications with severe vibration.

Product Ordering Flex-Lok™
Skirt Clamps
Information
Flex-Lok™ Skirt Clamp
One Skirt Clamp includes one 6' (1.8M) clamp runner, 4 clamp plates,
4 clamp pins and one 6' (1.8M) restraining bar.
Skirt board and rubber not included.
ORDERING ITEM WT.
Skirt Clamp FLSC-I 71052 31.1
Skirt Clamp Bulk ‡ FLSC-I-BULK 71054 31.1
REPLACEMENT PARTS
Clamp Runner - 6 ft. (1.8M) FL-RPI 71058 7.3
Clamp Plate FL-PC-I 71057 2.1
Clamp Pin FL-CP-I 71141 1.9
Restraining Bar - 6 ft. (1.8M) FL-RBI 71060 11.3
Standard
‡ Minimum order of 50 pieces for Bulk Pack pricing.
Skirt Rubber Thickness Range: 5/16" to 1" (8 - 25mm)
Mini Flex-Lok™ Skirt Clamp

One Mini Skirt Clamp includes one 6' (1.8M) clamp runner, 3 mini
clamp plates, 3 clamp pins and one 6' (1.8M) restraining bar. Skirt
board and rubber not included.
ORDERING ITEM WT.
Mini Skirt Clamp FLSCM-I 71055 27.6
Mini Skirt Clamp Bulk ‡ FLSCM-I-BULK 71100 27.6 Mini
REPLACEMENT PARTS
Clamp Runner - 6 ft. (1.8M) FL-RPI 71058 7.3
Mini Clamp Plate FLM-PC 71140 1.5
Clamp Pin FL-CP-I 71141 1.9
Restraining Bar - 6 ft. (1.8M) FL-RBI 71060 11.3
‡ Minimum order of 50 pieces for Bulk Pack pricing. 7"
Skirt Rubber Thickness Range: 5/16" to 5/8" (8 - 16mm)
4"
4.5" 2.5"
Stainless Steel* Flex-Lok™ Skirt Clamp Mini Standard

One SS Skirt Clamp includes one 6' (1.8M) clamp runner, 4 clamp plates, Two models are available to fit your
4 clamp pins and one 6' (1.8M) restraining bar. conveyor requirements.
ORDERING ITEM WT.
SS Skirt Clamp FLSC-ISS 75778 25.0
REPLACEMENT PARTS
SS Clamp Plate FL-PC-ISS 71168 1.9
Clamp Pin FL-CP-ISS 71164 1.9
Anti-Vibration Clamp Pins

SERVICE MAINTENANCE (Standard)
• Inspection - Periodically inspect the clearance between the skirt rubber and
the belt. If this gap is more than 1/4" (6mm) or if excessive fines are escaping, readjust the skirt rubber.
• Adjustment - Unlock the wedges on the clamp pins and slide the skirt rubber down to the belt. Relock the clamp pins.
TROUBLESHOOTING
Problem: Skirt rubber slips out of skirt clamp.
Solution: 1. Check to insure wedges in clamp pins are locked.
2. Check skirt rubber position. Skirt rubber must not fold and lie on top of belt.
Product Ordering Flex-Seal™
Skirt System
Information
Flex-Seal ™ Skirt System*

ORDERING ITEM WT.
Flex-Seal Skirt System RMC2-FS-1 76558 29.5
Flex-Seal Skirt System Bulk ‡ RMC2 77330 29.5
‡ Minimum order of 50 pieces for Bulk Pack pricing.
*Includes angle plate, one Bolt-On PAL PAK, and one 4' (1.2M) clamp bar.
Skirt board and rubber not included.
Skirt Rubber Thickness Range: 5/16" to 3/4" (8mm to 19mm).
Replacement Parts
ORDERING ITEM WT.
Angle Plate RMC2-FSAPK 76559 19.0
Bolt-On PAL PAK* RMC1-BPP 76415 6.5
Clamp Bar RMC1-CB 75820 4.0
*Includes two bolt-on clamp pins and two clamp plates.
Bolt-On PAL PAK
3"
(76mm)
Specifications
SKIRT RUBBER WIDTH AND THICKNESS RANGE
Width Required 6" (150mm)
Thickness Range 5/16" - 3/4" (8 - 19mm)
8 3/4"
(222mm)
Allows skirt rubber to

seal on the belt.
Product Notes:
• Solves material spillage problems in the conveyor loading zone.
• Stops material loss, eliminates safety hazards, and reduces wear on conveyor components.
• Anti-Vibration (standard) Clamp Pin with serrated wedge stays locked even in applications with severe vibration.

Product Ordering Flexco® Belt Maintenance Tools
Belt Lifters
Information
Flex-Lifter™ Conveyor Belt Lifter

Easy and safe way to lift tensioned belts so mechanical splicing
or other maintenance work can be done.
ORDERING ITEM WT. Flex-Lifter (M/L)
Medium Flex-Lifter 36" - 60" (900 - 1500 mm) FL-M 76981 91.0 3a
incl. return bar 3b
Large Flex-Lifter 48" - 72" (1200 - 1800 mm)
FL-L 76982 128.0
incl. return bar
XL Flex-Lifter 72" - 96" (1800 - 2400 mm) FL-XL 77386 128.0 4
does not incl. return bar
Flex-Lifter Cart FLCK 77729 20.0 2 5
Lifts troughed or flat belts.
1a
6a 1b
6b 7a
Replacement Parts
ORDERING ITEM WT.
REF DESCRIPTION NUMBER CODE LBS. Flex-Lifter (XL)
1a Extension Leg - Medium FLEL-M 76472 3.1
1b Extension Leg - Large FLEL-L 76473 3.7
3c
1c Extension Leg Kit- XL (includes 2 ext. legs) FLELK-XL 76986 13.0
2
2 Extension Leg Pin (with lanyard) FLELP 76474 0.1
4
3a Trough Wing - Medium (with brace) FLTW-M 77408 1.2
3b Trough Wing - Large (with brace) FLTW-L 77409 1.5
3c Trough Wing - XL (with brace) FLTW-XL 77410 4.2 5
4 Retainer Pin Pack (includes 4 pins) FLRP 76478 1.0
5 Retainer Clip Pack (includes 4 clips) FLCP 76479 0.1
6a Return Lift Bar - Medium FLRLB-M 77405 25.0
6b Return Lift Bar - Large FLRLB-L 77406 50.0
6c V-Return Lift Bar - XL FLVRL-XL 77406 63.0
6c
7a Shear Pin Kits - Medium/Large FL-PKIT-ML 77250 0.3 7b
1c
7b Shear Pin Kits - XL FL-PKIT-XL 77251 0.5
Safe Lifting Capacity

Max. Weight
Height
Medium/Large XL
Aluminum Content Flex-Lifter
PERCENT
in. mm lbs. kg. lbs. kg.
0-1 0-25 500 225 1100 500 ALUMINUM Mg Ti
1-2 25-50 1000 450 1800 815 ALLOY TYPE Magnesium Titanium
4043 0.05% 0.2% Flex-Lifter Cart
2-3 50-75 1500 675 2500 1140
3-4 75-100 2000 900 3200 1450 5356 5.5% 0.2%
4-5 100-125 2500 1150 3700 1680 6005 0.6% 0.1%
5-6 125-150 3000 1350 4600 2090 6061 1.0% 0.0%
6-7 150-175 3500 1600 5300 2400 6063 0.7% 0.0%
>7 >175 4000 1800 6000 2725 7075 2.5% 0.0%
Product Ordering Flexco® Belt Maintenance Tools
Belt Cutters and Clamps
Information
900 Series* Belt Cutter

BELT WIDTH ORDERING ITEM WT. Aluminum Content
DESCRIPTION in. mm NUMBER CODE LBS. 900 Series Belt Cutter
24 600 900924 04200 34.0 PERCENT
Cutter Complete 36 900 900936 04143 39.4 ALUMINUM Mg Ti
for belts up to 48 1200 900948 04144 48.0 ALLOY TYPE Magnesium Titanium
1.5" (38 mm)
60 1500 900960 04145 54.0 6005 0.6% 0.1%
* Patent Pending 72 1800 900972 04146 60.3 6061 1.0% 0.0%
84 2130 900984 04147 86.0 7075 2.5% 0.0%
Replacement Blade Kit 900CBK 04149 0.15
Drive Handle Assembly 04140 2.0
Electric Belt Cutter

ORDERING ITEM WT.
Electric Belt Cutter (for belts up to 1" thick) EBC1 30011 29.5
Electric Belt Cutter (for belts up to 2" thick) EBC2 30012 40.0
Replacement Blade for EBC1 EBC1-B 30003 2.0
Replacement Blade for EBC2 EBC2-B 30004 2.8
Replacement Electric Hammer Drill for EBC1 EBC1-DR 30013 7.5
Replacement Electric Hammer Drill for EBC2 EBC2-DR 30014 12.1
Replacement Eyebolt for EBC1 & EBC2 EBC-EB 30007 0.9
Cutting Capacity Replacement Handle for EBC1 & EBC2 EBC-H 30008 0.4
EBC1/CEBC1 EBC2/CEBC2
BELT
TYPE Imperial Metric Imperial Metric
Cordless Electric Belt Cutter
Rubber Up to 1" Up to 25 mm Up to 2" Up to 50 mm ORDERING ITEM WT.
PVC Up to 360 PIW Up to 630 EP Up to 1140 PIW Up to 2000 EP DESCRIPTION NUMBER CODE LBS.
CEBC1 30021 29.0
(for belts up to 1" thick)
CEBC2 30022 39.5
(for belts up to 2" thick)

Product Ordering Flex-Lag®
Rubber Pulley Lagging
Information
Flex-Lag® Light Duty Rubber*
THICKNESS LENGTH Strips = Pulley Diameter (in) x 3.14 ÷ 8, then
ORDERING ITEM
round up.
PATTERN in. mm ft. m MATERIAL NUMBER CODE
Light Duty .3 7.5 11 3.3 SBR 7.5NLD3.3/11 71077 Rolls = Strips x (Face Width + 4")
Light Duty .3 7.5 11 3.3 Nitrile 7.5WLD3.3/11 71076 A or B
A = Light Duty = 132"; B = All Others = 252"
Flex-Lag® Roll Lagging - SBR Rubber**
THICKNESS LENGTH * For Flex-Lag® Light Duty Rubber all material
ORDERING ITEM
PATTERN in. mm ft. m NUMBER CODE is 8" (200mm) wide and 10.8' (3.3M) rolls.
Diamond 3/8 10 21 6.5 10ND6.5/21 71002 ** For Flex-Lag® Natural Rubber and Flame-
Diamond 1/2 12 21 6.5 12ND6.5/21 71004 Resistant Rubber, all material is 8" (200mm)
Diamond 5/8 15 21 6.5 15ND6.5/21 71006 wide in 21' (6.5M) rolls.
Diamond 3/4 20 21 6.5 20ND6.5/21 71008
Diamond 1 25 21 6.5 25ND6.5/21 71152
Plain 3/8 10 21 6.5 10NP6.5/21 71010
Plain 1/2 12 21 6.5 12NP6.5/21 71012 Light Duty Lagging
Plain 5/8 15 21 6.5 15NP6.5/21 71017
Plain 3/4 20 21 6.5 20NP6.5/21 71021
Plain 1 25 21 6.5 25NP6.5/21 71163
Diamond Ceramic 1/2 12 21 6.5 12NDC6.5/21 71155
Medium Ceramic 5/8 15 21 6.5 CLMN6.5/21-15 62216
Diamond Ceramic Lagging
Flex-Lag® Roll Lagging - FRAS Rubber**
THICKNESS LENGTH
ORDERING ITEM
PATTERN in. mm ft. m NUMBER CODE
Diamond 3/8 10 21 6.5 10FRD6.5/21 71014
Diamond 1/2 12 21 6.5 12FRD6.5/21 71016 Diamond Grooved Lagging
Diamond 5/8 15 21 6.5 15FRD6.5/21 71018
Diamond 3/4 20 21 6.5 20FRD6.5/21 71019
Plain 3/8 10 21 6.5 10FRP6.5/21 71020
Plain 1/2 12 21 6.5 12FRP6.5/21 71022
Plain 5/8 15 21 6.5 15FRP6.5/21 71015
Plain 3/4 20 21 6.5 20FRP6.5/21 72129 Plain Grooved Lagging
Diamond Ceramic 1/2 12 21 6.5 12FRDC6.5/21 71159
Medium Ceramic 5/8 15 21 6.5 CLMFR6.5/21-15 61319
FRAS (Fire Resistant Anti Static) MSHA Certification # - MSHA NO. IC-190
Ordering Number Key: N - SBR, FR - FRAS, P - Plain, D - Diamond, D - Diamond Ceramic, LD- Light Duty
Strip Selection Chart Specifications:

Pulley Diameter Strips Pulley Diameter Strips
in. mm Req’d in. mm Req’d Temperature Rating
12.6-15.0 320-381 6 42.6-45.0 1083-1145 18 5°F to 185° F (-15° C to 85° C)
15.1-17.5 382-445 7 45.1-47.5 1146-1210 19 Rubber Compound
17.6-20.0 446-510 8 47.6-50.1 1211-1273 20 SBR (Styrene-Butadiene-Rubber)
20.1-22.5 511-573 9 50.2-52.6 1274-1336 21 Rubber Hardness
22.6-25.0 574-636 10 52.7-55.1 1337-1400 22 68 ± 3 Shore A
25.1-27.5 637-700 11 55.2-57.6 1403-1463 23
Ceramic Compound (Diamond Ceramic Lagging)
27.6-30.0 701-764 12 57.7-60.1 1466-1527 24
Aluminum Oxide (Al203)
30.1-32.5 765-827 13 60.2-62.6 1529-1590 25
32.6-35.0 828-891 14 62.7-65.1 1593-1654 26 Ceramic Hardness (Diamond Ceramic Lagging
35.1-37.5 892-955 15 65.2-67.6 1656-1717 27 83 HRA Rockwell Hardness Scale A
37.6-40.0 956-1018 16 67.7-70.1 1720-1781 28
40.1-42.5 1019-1082 17 70.2-72.6 1783-1844 29
Medium Ceramic Pulley Lagging
Information
Flex-Lag® Medium Ceramic Lagging - SBR Rubber

BELT CERAMIC STRIP
THICKNESS WIDTH LENGTH LENGTH DIMPLED TILE SMOOTH TILE
ORDERING ITEM ORDERING ITEM
NUMBER CODE NUMBER CODE
18 450 18 5/8 474 35 880 CLMN450/18-15 61294 CLMN450/18-15S 62052
24 600 24 5/8 626 41 1032 CLMN600/24-15 61295 CLMN600/24-15S 62053
30 750 30 5/8 779 47 1185 CLMN750/30-15 61296 CLMN750/30-15S 62054
36 900 36 5/8 931 53 1337 CLMN900/36-15 61297 CLMN900/36-15S 62055
42 1050 42 5/8 1082 59 1488 CLMN1050/42-15 61298 CLMN1050/42-15S 62056
5/8 15
48 1200 48 5/8 1235 65 1641 CLMN1200/48-15 61299 CLMN1200/48-15S 62057
54 1350 54 5/8 1388 71 1794 CLMN1350/54-15 61300 CLMN1350/54-15S 62058
60 1500 60 5/8 1541 77 1947 CLMN1500/60-15 61301 CLMN1500/60-15S 62059
72 1800 72 5/8 1842 89 2248 CLMN1800/72-15 61302 CLMN1800/72-15S 62060
84 2100 84 7/8 2155 101 2561 CLMN2100/84-15 61303 CLMN2100/84-15S 62061
Flex-Lag® Medium Ceramic Lagging - FRAS Rubber

BELT CERAMIC STRIP
THICKNESS WIDTH LENGTH LENGTH DIMPLED TILE SMOOTH TILE
NUMBER CODE NUMBER CODE
18 450 18 5/8 474 35 880 CLMFR450/18-15 61308 CLMFR450/18-15S 62063
24 600 24 5/8 626 41 1032 CLMFR600/24-15 61309 CLMFR600/24-15S 62064
30 750 30 5/8 779 47 1185 CLMFR750/30-15 61310 CLMFR750/30-15S 62065
36 900 36 5/8 931 53 1337 CLMFR900/36-15 61311 CLMFR900/36-15S 62066
42 1050 42 5/8 1082 59 1488 CLMFR1050/42-15 61312 CLMFR1050/42-15S 62067
5/8 15
48 1200 48 5/8 1235 65 1641 CLMFR1200/48-15 61313 CLMFR1200/48-15S 62068
54 1350 54 5/8 1388 71 1794 CLMFR1350/54-15 61314 CLMFR1350/54-15S 62069
60 1500 60 5/8 1541 77 1947 CLMFR1500/60-15 61315 CLMFR1500/60-15S 62070
72 1800 72 5/8 1842 89 2248 CLMFR1800/72-15 61316 CLMFR1800/72-15S 62071
84 2100 84 7/8 2155 101 2561 CLMFR2100/84-15 61317 CLMFR2100/84-15S 62072
Ordering Number Key: N - SRB, FR - FRAS
Specifications:
CERAMIC STRIP CONFIGURATION
BELT WIDTH / CERAMIC STRIP LENGTH
Temperature Rating Ceramic Compound
5°F to 185° F (-15° C to 85° C) Aluminum Oxide (Al203)
MAXIMUM PULLEY FACE WIDTH / OVERALL STRIP LENGTH
Strips Required = Pulley Diameter (in) x 3.14 ÷ 8, then round up. Rubber Compound Ceramic Hardness
SBR (Styrene-Butadiene- 83 HRA Rockwell
Strip Selection Rubber) Hardness Scale A
PULLEY DIAMETER STRIPS PULLEY DIAMETER STRIPS Rubber Hardness
in. mm REQ'D in. mm REQ'D 68 ± 3 Shore A 39% Ceramic Coverage
12.6-15.0 320-381 6 42.6-45.0 1083-1145 18
15.1-17.5 382-445 7 45.1-47.5 1146-1210 19 Product Notes:
17.6-20.0 446-510 8 47.6-50.1 1211-1273 20 • No wasted ceramic with easy-to-specify dimensions by using pulley
20.1-22.5 511-573 9 50.2-52.6 1274-1336 21 or belt width.
22.6-25.0 574-636 10 52.7-55.1 1337-1400 22 • Constructed from individual ceramic tiles molded into high-durometer
25.1-27.5 637-700 11 55.2-57.6 1403-1463 23 rubber for superior abrasion resistance.
27.6-30.0 701-764 12 57.7-60.1 1466-1527 24 • Horizontal grooves trap and deflect water.
30.1-32.5 765-827 13 60.2-62.6 1529-1590 25 • Molded ceramic buttons grip the belt’s underside for positive traction
32.6-35.0 828-891 14 62.7-65.1 1593-1654 26 and no slippage.
35.1-37.5 892-955 15 65.2-67.6 1656-1717 27
37.6-40.0 956-1018 16 67.7-70.1 1720-1781 28
40.1-42.5 1019-1082 17 70.2-72.6 1783-1844 29

Full Ceramic Pulley Lagging
Information
Flex-Lag® Full Ceramic Lagging - SBR Rubber
THICKNESS BELT WIDTH CERAMIC LENGTH STRIP LENGTH DIMPLED TILE SMOOTH TILE
ORDERING ORDERING
in. mm in. mm in. mm in. mm NUMBER ITEM CODE NUMBER ITEM CODE
1/2 12 18 450 18 1/2 460 34 860 CLN460/18.4-12 71111 CLN460/18.4-12S 79383
1/2 12 24 600 24 600 40 1000 CLN600/24-12 71112 CLN600/24-12S 79384
1/2 12 30 750 30 1/2 760 46 1160 CLN760/30.4-12 71113 CLN760/30.4-12S 79385
1/2 12 36 900 36 900 52 1300 CLN900/36-12 71115 CLN900/36-12S 79387
1/2 12 42 1050 42 1/2 1060 60 1500 CLN1060/42.4-12 71116 CLN1060/42.4-12S 79388
1/2 12 48 1200 48 1200 64 1600 CLN1200/48-12 71039 CLN1200/48-12S 79389
1/2 12 54 1350 54 1/2 1360 72 1800 CLN1360/54.4-12 71126 CLN1360/54.4-12S 79390
1/2 12 60 1500 60 3/4 1520 80 2000 CLN1520/60.8-12 71127 CLN1520/60.8-12S 79392
1/2 12 72 1800 72 1800 92 2300 CLN1800/72-12 71042 CLN1800/72-12S 79395
1/2 12 84 2100 84 2100 104 2600 CLN2100/84-12 71044 CLN2100/84-12S 79398
Flex-Lag® Full Ceramic Lagging - FRAS Rubber

THICKNESS BELT WIDTH CERAMIC LENGTH STRIP LENGTH DIMPLED TILE SMOOTH TILE
ORDERING ORDERING
in. mm in. mm in. mm in. mm NUMBER ITEM CODE NUMBER ITEM CODE
1/2 12 18 450 18 1/2 460 34 860 CLFR460/18.4-12 71118 CLFR460/18.4-12S 79406
1/2 12 24 600 24 600 40 1000 CLFR600/24-12 71119 CLFR600/24-12S 79407
1/2 12 30 750 30 1/2 760 46 1160 CLFR760/30.4-12 71120 CLFR760/30.4-12S 79408
1/2 12 36 900 36 900 52 1300 CLFR900/36-12 71122 CLFR900/36-12S 79410
1/2 12 42 1050 42 1/2 1060 60 1500 CLFR1060/42.4-12 71123 CLFR1060/42.4-12S 79411
1/2 12 48 1200 48 1200 64 1600 CLFR1200/48-12 71005 CLFR1200/48-12S 79412
1/2 12 54 1350 54 1/2 1360 72 1800 CLFR1360/54.4-12 A1636 CLFR1360/54.4-12S 79413
1/2 12 60 1500 60 3/4 1520 80 2000 CLFR1520/60.8-12 71009 CLFR1520/60.8-12S 79415
1/2 12 72 1800 72 1800 92 2300 CLFR1800/72-12 71079 CLFR1800/72-12S 79418
1/2 12 84 2100 84 2100 104 2600 CLFR2100/84-12 71082 CLFR2100/84-12S 79421
Ordering Number Key: N - SBR, FR - FRAS
CERAMIC STRIP CONFIGURATION

BELT WIDTH / CERAMIC STRIP LENGTH
MAXIMUM PULLEY FACE WIDTH / OVERALL STRIP LENGTH
Strips Required = Pulley Diameter (in) x 3.14 ÷ 8, then round up.

Strip Selection Chart
Pulley Diameter Strips Pulley Diameter Strips Special Offerings
in. mm Req’d in. mm Req’d USD
12.6-15.0 320-381 6 42.6-45.0 1083-1145 18 PRICE COMPARED TO
15.1-17.5 382-445 7 45.1-47.5 1146-1210 19 PRODUCT NATURAL RUBBER
17.6-20.0 446-510 8 47.6-50.1 1211-1273 20 15mm Thickness +5%
20.1-22.5 511-573 9 50.2-52.6 1274-1336 21 20mm Thickness +7 1/2%
22.6-25.0 574-636 10 52.7-55.1 1337-1400 22 25mm Thickness +15%
25.1-27.5 637-700 11 55.2-57.6 1403-1463 23
27.6-30.0 701-764 12 57.7-60.1 1466-1527 24 Specifications:
30.1-32.5 765-827 13 60.2-62.6 1529-1590 25
Temperature Rating Ceramic Compound
32.6-35.0 828-891 14 62.7-65.1 1593-1654 26
5°F to 185° F (-15° C to 85° C) Aluminum Oxide (Al203)
35.1-37.5 892-955 15 65.2-67.6 1656-1717 27
37.6-40.0 956-1018 16 67.7-70.1 1720-1781 28 Rubber Compound Ceramic Hardness
40.1-42.5 1019-1082 17 70.2-72.6 1783-1844 29 SBR (Styrene-Butadiene- 83 HRA Rockwell
Rubber) Hardness Scale A
Rubber Hardness 80% Ceramic
68 ± 3 Shore A Coverage
Adhesives and Toolbox
Information
Flex-Lag® Adhesive/Activator/Primer
ORDERING
NUMBER DESCRIPTION ITEM CODE WEIGHT VOLUME
FL-ADH-0.8 Adhesive 75017 1.6 lb. (0.7 Kg) 27.1 oz (0.8L)
FL-ACT Activator 70186 0.1 lb. (40 g) -
FL-PR-0.75 Primer 70189 1.6 lb. (0.7 Kg) 25.4 oz (0.75L)
Each Flex-Lag Adhesive is mixed with one Flex-Lag Activator. Refer to the usage
chart below to calculate the number of cans required for your pulley. For sizes
not included in the chart please contact Flexco Customer Service for assistance.
ADHESIVE 0.8L / ACTIVATOR 40g (1:1 ratio)

Face Width
In. 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90
mm 254 356 457 559 660 762 864 965 1067 1168 1270 1372 1473 1575 1676 1778 1880 1981 2083 2184 2286
8 203 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3
12 305 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4
16 406 1 1 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 5 5 5
20 508 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6
24 610 1 2 2 2 2 3 3 3 4 4 4 5 5 5 5 6 6 6 7 7 7
Pulley Diameter
28 711 1 2 2 2 3 3 3 4 4 5 5 5 6 6 6 7 7 7 8 8 8
32 813 2 2 2 3 3 4 4 4 5 5 6 6 6 7 7 8 8 8 9 9 10
36 914 2 2 3 3 3 4 4 5 5 6 6 7 7 8 8 8 9 9 10 10 11
40 1016 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12
44 1118 2 2 3 4 4 5 5 6 6 7 7 8 9 9 10 10 11 11 12 12 13
48 1219 2 3 3 4 4 5 6 6 7 7 8 9 9 10 10 11 12 12 13 13 14
52 1321 2 3 3 4 5 5 6 7 7 8 9 9 10 11 11 12 13 13 14 15 15
56 1422 2 3 4 4 5 6 6 7 8 9 9 10 11 11 12 13 14 14 15 16 16
60 1524 2 3 4 5 5 6 7 8 8 9 10 11 11 12 13 14 14 15 16 17 17
PRIMER .75L
Face Width
In. 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90
mm 254 356 457 559 660 762 864 965 1067 1168 1270 1372 1473 1575 1676 1778 1880 1981 2083 2184 2286
8 203 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
12 305 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
16 406 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
20 508 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
24 610 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Pulley Diameter
28 711 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
32 813 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
36 914 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
40 1016 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2
44 1118 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2
48 1219 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2
52 1321 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2
56 1422 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2
60 1524 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2
Flex-Lag® Toolbox
ORDERING
DESCRIPTION ITEM CODE WT. (LBS)
NUMBER
LAGGING-TB with Power Tools 79080 32.0
LAGGING-TB2 without Power Tools 79099 20.0
Both Include:
• 25-ft measuring tape • Paint brushes (3) • HD knife and replacement blades
• BCP location tool • Lagging stitchers (3) • Bench brush
• Chalk line • White paint marker • Deadblow hammer
LAGGING-TB Also Includes:
• Air hammer kit • Grinder
• 24-grit flap disc • Metal grinding disc
• Rubber buffing disc • Oscillating tool and accessories

Product Ordering Flex-Lag® Weld-On™
Rubber Pulley Lagging
Information

PULLEY
DIAMETER STRIPS
in. mm REQUIRED
16 400 8
18 450 9
24 600 12
30 750 15
36 900 18
42 1050 21
48 1200 24
54 1350 27
60 1500 30
Strips Required = Pulley Diameter (in) ÷ 2, then round down.
72 1800 36
Flex-Lag® Weld-on Diamond Lagging

SBR Rubber SBR Rubber
Pulley Diameter 16" - 29" (400 - 725 mm) Pulley Diameter 30" + (750 mm+)
BELT STRIP BELT STRIP
WIDTH LENGTH ORDERING ITEM WIDTH LENGTH ORDERING ITEM
in. mm in. mm NUMBER CODE in. mm in. mm NUMBER CODE
18 450 20 500 WND18-16 72169 18 450 20 500 WND18-30 72170
24 600 26 650 WND24-16 72171 24 600 26 650 WND24-30 72172
30 750 32 800 WND30-16 72173 30 750 32 800 WND30-30 72174
36 900 38 950 WND36-16 72175 36 900 38 950 WND36-30 72176
42 1050 44 1100 WND42-16 72177 42 1050 44 1100 WND42-30 72178
48 1200 51 1275 WND48-16 72179 48 1200 51 1275 WND48-30 72180
54 1350 57 1425 WND54-16 72181 54 1350 57 1425 WND54-30 72182
60 1500 63 1575 WND60-16 72183 60 1500 63 1575 WND60-30 72184
72 1800 75 1875 WND72-16 72185 72 1800 75 1875 WND72-30 72186
FRAS Rubber FRAS Rubber

WIDTH LENGTH WIDTH LENGTH
18 450 20 500 WFRD18-16 72187 18 450 20 500 WFRD18-30 72188
24 600 26 650 WFRD24-16 72189 24 600 26 650 WFRD24-30 72190
30 750 32 800 WFRD30-16 72191 30 750 32 800 WFRD30-30 72192
36 900 38 950 WFRD36-16 72193 36 900 38 950 WFRD36-30 72194
42 1050 44 1100 WFRD42-16 72195 42 1050 44 1100 WFRD42-30 72196
48 1200 51 1275 WFRD48-16 72197 48 1200 51 1275 WFRD48-30 72198
54 1350 57 1425 WFRD54-16 72199 54 1350 57 1425 WFRD54-30 72200
60 1500 63 1575 WFRD60-16 72201 60 1500 63 1575 WFRD60-30 72202
72 1800 75 1875 WFRD72-16 72203 72 1800 75 1875 WFRD72-30 72204
Product Ordering Flex-Lag® Weld-On™
Ceramic Pulley Lagging
Information

PULLEY
DIAMETER STRIPS
in. mm REQUIRED
16 400 8
18 450 9
24 600 12
30 750 15
36 900 18
42 1050 21
48 1200 24
54 1350 27
60 1500 30
Strips Required = Pulley Diameter (in) ÷ 2, then round down. 72 1800 36
Flex-Lag® Weld-on Full Ceramic Lagging

SBR Rubber SBR Rubber
WIDTH LENGTH ORDERING ITEM WIDTH LENGTH ORDERING ITEM
18 450 20 500 WCLN18-16 71131 24 600 26 650 WCLN24-30 71150
24 600 26 650 WCLN24-16 71132 30 750 32 800 WCLN30-30 71134
30 750 32 800 WCLN30-16 71133 36 900 38 950 WCLN36-30 71136
36 900 38 950 WCLN36-16 71135 42 1050 44 1100 WCLN42-30 71138
42 1050 44 1100 WCLN42-16 71137 48 1200 51 1275 WCLN48-30 71144
48 1200 51 1275 WCLN48-16 71139 54 1350 57 1425 WCLN54-30 71145
54 1350 57 1425 WCLN54-16 71149 60 1500 63 1575 WCLN60-30 71146
60 1500 63 1575 WCLN60-16 71165 72 1800 75 1875 WCLN72-30 71147
72 1800 75 1875 WCLN72-16 71151

Index by Item Code
ITEM ORDERING ITEM ORDERING ITEM ORDERING ITEM ORDERING
CODE NUMBER PAGE CODE NUMBER PAGE CODE NUMBER PAGE CODE NUMBER PAGE
04140 213 61297 CLMN900/36-15 215 71112 CLN600/24-12 216 73024 PPS6 89
04143 900936 213 61298 CLMN1050/42-15 215 71113 CLN760/30.4-12 216 73047 HSA8SS 68
04144 900948 213 61299 CLMN1200/48-15 215 71115 CLN900/36-12 216 73047 HSA8SS 70
04145 900960 213 61300 CLMN1350/54-15 215 71116 CLN1060/42.4-12 216 73047 HSA8SS 72
04146 900972 213 61301 CLMN1500/60-15 215 71118 CLFR460/18.4-12 216 73047 HSA8SS 73
04147 900984 213 61302 CLMN1800/72-15 215 71119 CLFR600/24-12 216 73047 HSA8SS 139
04149 900CBK 213 61303 CLMN2100/84-15 215 71120 CLFR760/30.4-12 216 73047 HSA8SS 139
04200 900924 213 61308 CLMFR450/18-15 215 71122 CLFR900/36-12 216 73048 HSA8S 68
26107 N6D3T-24-9-A45 163 61309 CLMFR600/24-15 215 71123 CLFR1060/42.4-12 216 73048 HSA8S 70
26108 N6D3T-30-11-A45 163 61310 CLMFR750/30-15 215 71126 CLN1360/54.4-12 216 73048 HSA8S 72
26109 N6D3T-36-13-A45 163 61311 CLMFR900/36-15 215 71127 CLN1520/60.8-12 216 73048 HSA8S 73
26110 N6D3T-42-15-A45 163 61312 CLMFR1050/42-15 215 71131 WCLN18-16 219 73048 HSA8S 139
26111 N6D3T-48-17-A45 163 61313 CLMFR1200/48-15 215 71132 WCLN24-16 219 73048 HSA8S 139
26112 N6D3T-54-19-A45 163 61314 CLMFR1350/54-15 215 71133 WCLN30-16 219 73049 HSA8M 68
26184 NI6D3T-24-9-A45 166 61317 CLMFR2100/84-15 215 71136 WCLN36-30 219 73049 HSA8M 73
26184 NI6D3T-24-9-A45 175 61319 CLMFR6.5/21-15 214 71137 WCLN42-16 219 73049 HSA8M 139
26185 NI6D3T-30-11-A45 166 62052 CLMN450/18-15S 215 71138 WCLN42-30 219 73049 HSA8M 139
26185 NI6D3T-30-11-A45 175 62053 CLMN600/24-15S 215 71139 WCLN48-16 219 73050 HPS8 139
26186 NI6D3T-36-13-A45 166 62054 CLMN750/30-15S 215 71140 FLM-PC 210 73063 HSA8L 68
26186 NI6D3T-36-13-A45 175 62055 CLMN900/36-15S 215 71141 FL-CP-I 210 73063 HSA8L 70
26187 NI6D3T-42-15-A45 166 62056 CLMN1050/42-15S 215 71141 FL-CP-I 210 73063 HSA8L 72
26187 NI6D3T-42-15-A45 175 62057 CLMN1200/48-15S 215 71144 WCLN48-30 219 73063 HSA8L 139
26188 NI6D3T-48-17-A45 166 62058 CLMN1350/54-15S 215 71145 WCLN54-30 219 73063 HSA8L 139
26188 NI6D3T-48-17-A45 175 62059 CLMN1500/60-15S 215 71146 WCLN60-30 219 73064 HSA8LL 68
26190 NI6D3T-60-21-A45 166 62063 CLMFR450/18-15S 215 71150 WCLN24-30 219 73064 HSA8LL 139
26190 NI6D3T-60-21-A45 175 62064 CLMFR600/24-15S 215 71151 WCLN72-16 219 73064 HSA8LL 139
26191 NI6D3T-72-25-A45 166 62065 CLMFR750/30-15S 215 71152 25ND6.5/21 214 73131 CBV-XS 156
26191 NI6D3T-72-25-A45 175 62066 CLMFR900/36-15S 215 71155 12NDC6.5/21 214 73132 CBV-S 156
26714 NS6DV-18-9.625-A45 200 62067 CLMFR1050/42-15S 215 71159 12FRDC6.5/21 214 73133 CBV-M 156
26714 NS6DV-18-9.625-A45 202 62068 CLMFR1200/48-15S 215 71163 25NP6.5/21 214 73134 CBV-L 156
26715 NS6DV-24-12.625-A45 200 62069 CLMFR1350/54-15S 215 71164 FL-CP-ISS 210 73156 PSA150 86
26715 NS6DV-24-12.625-A45 202 62070 CLMFR1500/60-15S 215 71165 WCLN60-16 219 73156 PSA150 89
26716 NS6DV-30-15.625-A45 200 62071 CLMFR1800/72-15S 215 71168 FL-PC-ISS 210 73156 PSA150 106
26716 NS6DV-30-15.625-A45 202 62072 CLMFR2100/84-15S 215 72129 20FRP6.5/21 214 73156 PSA150 109
26717 NS6DV-36-18.625-A45 200 62216 CLMN6.5/21-15 214 72169 WND18-16 218 73163 RBPRET 192
26717 NS6DV-36-18.625-A45 202 70186 FL-ACT 217 72170 WND18-30 218 73163 RBPRET 199
26718 NS6DV-42-21.625-A45 200 70189 FL-PR-0.75 217 72171 WND24-16 218 73190 VBK-XS 156
26718 NS6DV-42-21.625-A45 202 71002 10ND6.5/21 214 72172 WND24-30 218 73190 VBK-XS 159
26719 NS6DV-48-24.625-A45 200 71004 12ND6.5/21 214 72173 WND30-16 218 73191 VBK-S 156
26719 NS6DV-48-24.625-A45 202 71005 CLFR1200/48-12 216 72174 WND30-30 218 73191 VBK-S 159
26720 NS6DV-54-27.625-A45 200 71006 15ND6.5/21 214 72175 WND36-16 218 73192 VBK-M 156
26720 NS6DV-54-27.625-A45 202 71008 20ND6.5/21 214 72176 WND36-30 218 73192 VBK-M 159
26721 NS6DV-60-30.625-A45 200 71009 CLFR1520/60.8-12 216 72177 WND42-16 218 73193 VBK-L 156
26721 NS6DV-60-30.625-A45 202 71010 10NP6.5/21 214 72178 WND42-30 218 73193 VBK-L 159
26722 NS6DV-72-36.625-A45 200 71012 12NP6.5/21 214 72179 WND48-16 218 73399 VMBK 159
26722 NS6DV-72-36.625-A45 202 71014 10FRD6.5/21 214 72180 WND48-30 218 73400 VPXS 159
26723 NS7EV-48-24.625-A105 200 71015 15FRP6.5/21 214 72181 WND54-16 218 73408 VPS 159
26723 NS7EV-48-24.625-A105 202 71016 12FRD6.5/21 214 72182 WND54-30 218 73409 VPM 159
26724 NS7EV-54-27.625-A105 200 71017 15NP6.5/21 214 72183 WND60-16 218 73410 VPL 159
26724 NS7EV-54-27.625-A105 202 71018 15FRD6.5/21 214 72184 WND60-30 218 73438 PV72 86
26725 NS7EV-60-30.625-A105 200 71019 20FRD6.5/21 214 72185 WND72-16 218 73533 VCS 159
26725 NS7EV-60-30.625-A105 202 71020 10FRP6.5/21 214 72186 WND72-30 218 73535 VMFXS 159
26726 NS7EV-72-36.625-A105 200 71021 20NP6.5/21 214 72187 WFRD18-16 218 73549 VMFS 159
26726 NS7EV-72-36.625-A105 202 71022 12FRP6.5/21 214 72188 WFRD18-30 218 73626 PHA 89
26727 NS7EV-84-42.625-A105 200 71039 CLN1200/48-12 216 72189 WFRD24-16 218 73626 PHA 109
26727 NS7EV-84-42.625-A105 202 71042 CLN1800/72-12 216 72190 WFRD24-30 218 73628 RSA150 90
26728 NS7EV-96-48.625-A105 200 71044 CLN2100/84-12 216 72191 WFRD30-16 218 73628 RSA150 92
26728 NS7EV-96-48.625-A105 202 71052 FLSC-I 210 72192 WFRD30-30 218 73628 RSA150 93
30011 EBC1 213 71054 FLSC-I-BULK 210 72193 WFRD36-16 218 73628 RSA150 95
30012 EBC2 213 71055 FLSCM-I 210 72194 WFRD36-30 218 73628 RSA150 96
30003 EBC1-B 213 71057 FL-PC-I 210 72195 WFRD42-16 218 73628 RSA150 97
30004 EBC2-B 213 71058 FL-RPI 210 72196 WFRD42-30 218 73628 RSA150 98
30013 EBC1-DR 213 71058 FL-RPI 210 72197 WFRD48-16 218 73628 RSA150 99
30014 EBC2-DR 213 71060 FL-RBI 210 72198 WFRD48-30 218 73628 RSA150 103
30007 EBC-EB 213 71060 FL-RBI 210 72199 WFRD54-16 218 73628 RSA150 105
30008 EBC-H 213 71076 7.5WLD3.3/11 214 72200 WFRD54-30 218 73628 RSA150 110
30021 CEBC1 213 71077 7.5NLD3.3/11 214 72201 WFRD60-16 218 73628 RSA150 113
30022 CEBC2 213 71079 CLFR1800/72-12 216 72202 WFRD60-30 218 73628 RSA150 114
61294 CLMN450/18-15 215 71082 CLFR2100/84-12 216 72203 WFRD72-16 218 73628 RSA150 117
61295 CLMN600/24-15 215 71100 FLSCM-I-BULK 210 72204 WFRD72-30 218 73631 HVPT 70
61296 CLMN750/30-15 215 71111 CLN460/18.4-12 216 73017 PP72 89 73631 HVPT 72
Index by Item Code
73631 HVPT 139 74563 RBPSR-M 192 74774 ELT 138 74931 MCSHD 206
73631 HVPT 139 74564 RBPSR-L 192 74775 STJM 18 74931 MCSHD 207
74037 VMFM 159 74565 RBPSR-XL 192 74775 STJM 121 74932 MCSSD 206
74038 VMFL 159 74566 PC18 86 74775 STJM 139 74932 MCSSD 207
74100 HW-BC 138 74567 PC24 86 74776 HBTK 139 74941 SRBK 136
74141 HTTS 138 74568 PC30 86 74821 HTV18SS 73 74952 SPKHD42 135
74307 HXF8SS 66 74569 PC36 86 74822 HTV24SS 73 74953 SPKHD48 135
74307 HXF8SS 139 74570 PC42 86 74823 HTV30SS 73 74954 SPKHD54 135
74313 STKHSS 139 74571 PC48 86 74824 HTV36SS 73 74955 SPKHD60 135
74316 STKHSD 139 74572 PC54 86 74825 HTV42SS 73 74982 VMLK 159
74389 CBV-72 156 74573 PC60 86 74826 HTV48SS 73 74983 VSC 159
74390 CBV-84 156 74574 PC72 86 74828 HTV18S 73 75017 FL-ADH-0.8 217
74391 CBV-96 156 74612 RP-72 92 74829 HTV24S 73 75419 HVT8-S/S 68
74395 VP72 159 74618 RC18 90 74830 HTV30S 73 75419 HVT8-S/S 72
74396 VP84 159 74619 RC24 90 74831 HTV36S 73 75419 HVT8-S/S 73
74397 VP96 159 74620 RC30 90 74832 HTV42S 73 75419 HVT8-S/S 139
74398 VMF72 159 74621 RC36 90 74833 HTV48S 73 75419 HVT8-S/S 139
74399 VMF84 159 74622 RC42 90 74838 HTV36M 73 75513 PAB 77
74417 STJK 18 74623 RC48 90 74839 HTV42M 73 75513 PAB 89
74417 STJK 121 74624 RC54 90 74840 HTV48M 73 75513 PAB 92
74417 STJK 139 74625 RC60 90 74885 PTM30T 203 75513 PAB 109
74419 STTS 18 74626 RC72 90 74886 PTM36T 203 75513 PAB 113
74419 STTS 121 74641 RV72 90 74887 PTM42T 203 75513 PAB 130
74419 STTS 139 74689 HXF8S 66 74888 PTM48T 203 75513 PAB 140
74440 VMF96 159 74689 HXF8S 139 74889 PTM54T 203 75522 RBPFK-S 192
74448 UFB18 118 74690 HXF8M 66 74890 PTM60T 203 75523 RBPFK-M 192
74449 UFB24 118 74690 HXF8M 139 74891 PTMHD54T 203 75524 RBPFK-L 192
74450 UFB30 118 74690 HXF8M 139 74892 PTMHD60T 203 75525 RBPFK-XL 192
74451 UFB36 118 74691 HXF8L 66 74893 PTMHD72T 203 75526 RBPMBK 192
74452 UFB42 118 74691 HXF8L 139 74894 PTMHD84T 203 75527 RBPIT-S 192
74453 UFB48 118 74691 HXF8L 139 74895 PTMSD72T 203 75528 RBPIT-M 192
74454 UFB54 118 74692 RDP1-S 157 74896 PTMSD84T 203 75529 RBPIT-L 192
74455 UFB60 118 74693 RDP1-M 157 74897 PTMSD96T 203 75530 RBPIT-XL 192
74456 UFB72 118 74694 RDP1-L 157 74898 PTMSD120T 203 75531 MFASK 206
74457 VBK-72 156 74695 RDP1-XL 157 74899 PTM30R 203 75565 HSA8SSS 139
74457 VBK-72 159 74698 RDPMBK 159 74900 PTM36R 203 75565 HSA8SSS 139
74458 VBK-84 156 74699 RDPBK-S 157 74901 PTM42R 203 75566 RDPF-S 159
74458 VBK-84 159 74699 RDPBK-S 159 74902 PTM48R 203 75567 RDPF-M 159
74459 VBK-96 156 74700 RDPBK-M 157 74903 PTM54R 203 75568 RDPF-L 159
74459 VBK-96 159 74700 RDPBK-M 159 74904 PTM60R 203 75569 RDPF-XL 159
74460 UFB84 118 74701 RDPBK-L 157 74905 PTMHD54R 203 75570 VUBK-XS 156
74502 HDTS 18 74701 RDPBK-L 159 74906 PTMHD60R 203 75571 VUBK-S 156
74502 HDTS 121 74702 RDPBK-XL 157 74907 PTMHD72R 203 75572 VUBK-M 156
74502 HDTS 139 74702 RDPBK-XL 159 74908 PTMHD84R 203 75573 VUBK-L 156
74504 STKD 139 74705 RDPMSK 159 74909 PTMSD72R 203 75574 VUBK-72 156
74505 STKS 139 74709 SPK18 135 74910 PTMSD84R 203 75575 VUBK-84 156
74534 ISC 140 74710 SPK24 135 74911 PTMSD96R 203 75576 VUBK-96 156
74535 ICT6 74 74711 SPK30 135 74912 PTMSD120R 203 75578 SPMK2 135
74535 ICT6 75 74712 SPK36 135 74914 MSR 206 75579 SPMK3 135
74535 ICT6 77 74713 SPK42 135 74915 MSRSD 206 75583 PTM24T 203
74535 ICT6 86 74714 SPK48 135 74916 PMSMK 206 75584 PTM24R 203
74535 ICT6 87 74715 SPK54 135 74917 PMSMKSD 206 75585 STTS-S/S 122
74535 ICT6 89 74716 SPK60 135 74918 MAK 206 75586 HDTS-S/S 122
74535 ICT6 90 74717 SPK72 135 74919 MAKHD 206 75588 PLSC18 87
74535 ICT6 92 74718 SPKHD72 135 74920 MAKSD 206 75589 PLSC24 87
74535 ICT6 93 74719 SPKHD84 135 74921 MORK 206 75590 PLSC30 87
74535 ICT6 95 74720 SPKHD96 135 74921 MORK 207 75591 PLSC36 87
74535 ICT6 96 74721 SPKHD120 135 74922 MORKSD 206 75592 PLSC42 87
74535 ICT6 98 74734 SPCP 135 74922 MORKSD 207 75593 PLSC48 87
74535 ICT6 99 74742 SPBV 135 74923 MCRK 206 75594 PLSC54 87
74535 ICT6 103 74743 SPYS 135 74923 MCRK 207 75595 PLSP18 89
74535 ICT6 105 74744 SPPR 135 74924 MCRKSD 206 75596 PLSP24 89
74535 ICT6 106 74745 SPH10 135 74924 MCRKSD 207 75597 PLSP30 89
74535 ICT6 109 74746 SPN 135 74925 MCB 206 75598 PLSP36 89
74535 ICT6 110 74747 SPG 135 74925 MCB 207 75599 PLSP42 89
74535 ICT6 113 74748 SPPN 135 74926 MCBSD 206 75600 PLSP48 89
74535 ICT6 114 74771 HSSTS 72 74926 MCBSD 207 75601 PLSP54 89
74535 ICT6 117 74771 HSSTS 139 74927 MCSK 206 75610 EZP1-212 11
74535 ICT6 140 74772 HSSCS 72 74927 MCSK 207 75611 EZP1-218 11
74550 HDARK 139 74772 HSSCS 139 74928 MCSKHD 206 75612 EZP1-224 11
74558 RBP1S-S 190 74773 PSSS 89 74928 MCSKHD 207 75613 EZP1-230 11
74559 RBP1S-M 190 74773 PSSS 95 74929 MCSKSD 206 75614 EZP1-236 11
74560 RBP1S-L 190 74773 PSSS 99 74929 MCSKSD 207 75615 EZP1-242 11
74561 RBP1S-XL 190 74773 PSSS 103 74930 MCS 206 75616 EZP1-248 11
74562 RBPSR-S 192 74773 PSSS 105 74930 MCS 207 75617 EZP1-254 11

Index by Item Code
75618 EZP1-260 11 75653 EZS2P24 77 75811 MSPMPK 45 75897 PTPK 58
75619 EZP1P12 18 75653 EZS2P24 140 75811 MSPMPK 65 75898 PSTS-W 37
75619 EZP1P12 19 75654 EZS2P30 77 75811 MSPMPK 72 75898 PSTS-W 45
75620 EZP1P18 18 75654 EZS2P30 140 75816 MSPPL 37 75898 PSTS-W 53
75621 EZP1P24 19 75656 EZS2P42 77 75817 RMC1 209 75898 PSTS-W 72
75622 EZP1P30 18 75656 EZS2P42 140 75819 RMC1-CP 209 75898 PSTS-W 121
75622 EZP1P30 19 75657 EZS2P48 77 75820 RMC1-CB 209 75899 PSTS-S 45
75623 EZP1P36 18 75657 EZS2P48 140 75820 RMC1-CB 211 75899 PSTS-S 53
75623 EZP1P36 19 75658 EZS2P54 77 75821 RMC1-PL 209 75899 PSTS-S 58
75624 EZP1P42 18 75658 EZS2P54 140 75830 MMBK 131 75899 PSTS-S 65
75624 EZP1P42 19 75659 EZS2P60 77 75831 MSPBPK 37 75899 PSTS-S 72
75625 EZP1P48 18 75659 EZS2P60 140 75831 MSPBPK 126 75901 HFC2 72
75625 EZP1P48 19 75660 EZS2P72 77 75832 RMC1-PP 209 75901 HFC2 139
75626 EZP1P54 18 75660 EZS2P72 140 75833 RMC1-BULK 209 75902 HXFC2 72
75626 EZP1P54 19 75661 FFCK 77 75834 RMC1-LS 209 75902 HXFC2 139
75627 EZP1P60 18 75666 EZS2MBK 77 75835 RMC1LS-PL 209 75905 AWTB 45
75627 EZP1P60 19 75666 EZS2MBK 89 75836 RMC1-LSPP 209 75905 AWTB 53
75628 CRB10 15 75666 EZS2MBK 92 75843 STS-S 85 75905 AWTB 58
75628 CRB10 21 75666 EZS2MBK 109 75843 STS-S 95 75906 AWTMB 45
75629 CRB16 15 75666 EZS2MBK 140 75843 STS-S 117 75907 AWTA 45
75629 CRB16 21 75771 EZP1-272 11 75843 STS-S 126 75907 AWTA 53
75629 CRB16 35 75772 EZP1P72 18 75844 STS-B 85 75907 AWTA 58
75629 CRB16 143 75772 EZP1P72 19 75844 STS-B 95 75909 AWTHK 45
75630 CRB22 15 75773 CRB70 15 75844 STS-B 103 75909 AWTHK 53
75630 CRB22 21 75773 CRB70 21 75844 STS-B 104 75909 AWTHK 58
75630 CRB22 35 75773 CRB70 35 75844 STS-B 117 75910 MHS-24 96
75630 CRB22 143 75773 CRB70 143 75844 STS-B 126 75911 MHS-30 96
75631 CRB28 15 75774 EZP1-872 11 75845 QMTS-P 18 75912 MHS-36 96
75631 CRB28 21 75775 CRB64 15 75845 QMTS-P 37 75913 MHS-42 96
75631 CRB28 35 75775 CRB64 21 75845 QMTS-P 45 75914 MHS-48 96
75631 CRB28 143 75775 CRB64 35 75845 QMTS-P 65 75915 MHS-54 96
75632 CRB34 15 75778 FLSC-ISS 210 75845 QMTS-P 72 75916 MHS-60 96
75632 CRB34 21 75779 EZP1-818 11 75845 QMTS-P 121 75917 MHS-72 96
75632 CRB34 35 75780 EZP1-824 11 75846 STS-W 95 75918 MHSP-24 95
75632 CRB34 143 75781 EZP1-830 11 75846 STS-W 103 75918 MHSP-24 103
75633 CRB40 15 75782 EZP1-836 11 75846 STS-W 104 75919 MHSP-30 95
75633 CRB40 21 75783 EZP1-842 11 75846 STS-W 117 75919 MHSP-30 103
75633 CRB40 35 75784 EZP1-848 11 75846 STS-W 126 75920 MHSP-36 95
75633 CRB40 143 75785 EZP1-854 11 75847 STAK 103 75920 MHSP-36 103
75634 CRB46 15 75786 EZP1-860 11 75847 STAK 105 75921 MHSP-42 95
75634 CRB46 21 75787 MSP-224 33 75847 STAK 117 75921 MHSP-42 103
75634 CRB46 35 75788 MSP-230 33 75847 STAK 126 75922 MHSP-48 95
75634 CRB46 143 75789 MSP-236 33 75868 MDWS-24 123 75922 MHSP-48 103
75635 CRB52 15 75790 MSP-242 33 75869 MDWS-30 123 75923 MHSP-54 95
75635 CRB52 21 75791 MSP-248 33 75870 MDWS-36 123 75923 MHSP-54 103
75635 CRB52 35 75792 MSP-254 33 75871 MDWS-42 123 75924 MHSP-60 95
75635 CRB52 143 75793 MSP-260 33 75872 MDWS-48 123 75924 MHSP-60 103
75636 CRB58 15 75794 MSP-272 33 75873 MDWS-54 123 75925 MHSP-72 95
75636 CRB58 21 75795 MSP-824 33 75874 MDWS-60 123 75925 MHSP-72 103
75636 CRB58 35 75796 MSP-830 33 75875 MDWS-72 123 75927 PFC 103
75636 CRB58 143 75797 MSP-836 33 75883 DWP-72 126 75927 PFC 117
75637 EZP1MPK 18 75798 MSP-842 33 75884 CDWB24 123 75929 MHCP-24S 54
75641 EZP1PL 18 75799 MSP-848 33 75885 CDWB30 123 75930 MHCP-30S 54
75642 EZP1BP 18 75802 MSP-872 33 75888 CDWB48 123 75933 MHCP-48S 54
75642 EZP1BP 19 75803 MSPP24 37 75889 CDWB54 123 75934 MHCP-54S 54
75642 EZP1BP 148 75805 MSPP36 37 75892 STAKHD 103 75945 MHCP-BPA24 56
75643 EZS2-18 74 75805 MSPP36 126 75892 STAKHD 105 75946 MHCP-BPA30 56
75646 EZS2-36 74 75807 MSPP48 37 75896 PSTA 37 75949 MHCP-BPA48 56
75650 EZS2-60 74 75809 MSPP60 37 75896 PSTA 65 75953 MHCP-BCK24 56
75651 EZS2-72 74 75809 MSPP60 126 75896 PSTA 72 75954 MHCP-BCK30 56
75652 EZS2P18 77 75810 MSPP72 37 75896 PSTA 121 75955 MHCP-BCK36 56
75652 EZS2P18 140 75811 MSPMPK 37 75897 PTPK 53 75956 MHCP-BCK42 56
Index by Item Code
75957 MHCP-BCK48 56 76074 QMT-P 37 76138 HXF2-18SS 66 76293 HXF2-30S 66
75958 MHCP-BCK54 56 76074 QMT-P 45 76139 HXF2-24SS 66 76294 HXF2-30M 66
75959 MHCP-BCK60 56 76074 QMT-P 65 76140 HXF2-30SS 66 76295 HXF2-36S 66
75960 MHCP-BCK72 56 76074 QMT-P 72 76141 HXF2-36SS 66 76296 HXF2-36M 66
75961 MHP-CP24 58 76075 QMT-W 37 76142 HXF2-42SS 66 76297 HXF2-36L 66
75962 MHP-CP30 58 76075 QMT-W 45 76143 HXF2-48SS 66 76298 HXF2-42S 66
75963 MHP-CP36 58 76075 QMT-W 65 76144 HXF2-54SS 66 76299 HXF2-42M 66
75964 MHP-CP42 58 76075 QMT-W 72 76145 HXF2-60S 66 76300 HXF2-42L 66
75965 MHP-CP48 58 76083 SATB 104 76146 HXF2-72S 66 76301 HXF2-48S 66
75966 MHP-CP54 58 76083 SATB 126 76169 MHS-18V 96 76302 HXF2-48M 66
75967 MHP-CP60 58 76084 SATHB 104 76170 MHS-24V 96 76303 HXF2-48L 66
75968 MHP-CP72 58 76084 SATHB 126 76171 MHS-30V 96 76304 HXF2-54S 66
75978 SSRB 58 76085 HTS18 75 76172 MHS-36V 96 76305 HXF2-54M 66
75979 HXF2-SS 66 76086 HTS24 75 76173 MHS-42V 96 76306 HXF2-54L 66
75979 HXF2-SS 72 76087 HTS30 75 76174 MHS-48V 96 76307 HXF2-60M 66
75979 HXF2-SS 139 76088 HTS36 75 76175 MHS-54V 96 76308 HXF2-60L 66
75980 HXF2-S 66 76089 HTS42 75 76176 MHS-60V 96 76309 HXF2-72M 66
75980 HXF2-S 72 76090 HTS48 75 76177 MHS-72V 96 76310 HXF2-72L 66
75980 HXF2-S 139 76091 HTS54 75 76178 MHSP-18 95 76392 MHP-EP 45
75981 HXF2-M 66 76092 HTS60 75 76178 MHSP-18 103 76392 MHP-EP 53
75981 HXF2-M 72 76093 HTS72 75 76190 HV-18S 68 76392 MHP-EP 58
75981 HXF2-M 139 76094 HTSCK 75 76191 HV-18M 68 76392 MHP-EP 109
75982 HXF2-L 66 76094 HTSCK 77 76192 HV-24S 68 76392 MHP-EP 113
75982 HXF2-L 72 76096 QMTPAK 37 76193 HV-24M 68 76392 MHP-EP 117
75982 HXF2-L 139 76096 QMTPAK 45 76194 HV-30S 68 76393 MHCP-CH 58
75985 RBQC1HD-12 148 76096 QMTPAK 65 76195 HV-30M 68 76394 MHCP-BS 58
75986 RBQC1HD-18 148 76096 QMTPAK 72 76196 HV-36S 68 76399 HOBK 65
75987 RBQC1HD-24 148 76096 QMTPAK 121 76197 HV-36M 68 76399 HOBK 72
75988 RBQC1HD-30 148 76097 QMTBK-P 37 76198 HV-36L 68 76403 EST-P 18
75989 RBQC1HD-36 148 76097 QMTBK-P 38 76199 HV-42S 68 76404 EST-S 18
75990 RBQC1HD-42 148 76097 QMTBK-P 45 76205 RVT6-S/S 105 76405 EST-B 18
75991 RBQC1HD-48 148 76097 QMTBK-P 46 76249 RSA 92 76406 ESTAK-EST 18
75992 RBQC1HD-54 148 76097 QMTBK-P 65 76249 RSA 113 76406 ESTAK-EST 121
75993 RBQC1HD-66 148 76097 QMTBK-P 72 76251 HV-42M 68 76407 ESPSBK 18
75995 RBAGS-16 147 76098 QMTBK-W 37 76252 HV-42L 68 76408 ESPBK 18
75996 RBAGS-22 147 76098 QMTBK-W 38 76253 HV-42LL 68 76409 ESPRK 18
75997 RBAGS-28 147 76098 QMTBK-W 45 76254 HV-48S 68 76409 ESPRK 121
75998 RBAGS-34 147 76098 QMTBK-W 46 76255 HV-48M 68 76410 ESBK-PS 18
75999 RBAGS-40 147 76098 QMTBK-W 53 76256 HV-48L 68 76410 ESBK-PS 121
76024 MAPEK 131 76098 QMTBK-W 58 76257 HV-48LL 68 76411 ESBK-B 18
76025 MCBK 206 76098 QMTBK-W 65 76258 HV-54M 68 76412 ESS-S 18
76025 MCBK 207 76098 QMTBK-W 72 76259 HV-54L 68 76412 ESS-S 121
76026 MCBKHD 206 76098 QMTBK-W 121 76260 HV-54LL 68 76413 ESS-B 18
76026 MCBKHD 207 76099 QMTPSBK 37 76261 HV-60M 68 76414 RMC1-BCP 209
76027 MCBKSD 206 76099 QMTPSBK 45 76262 HV-60L 68 76415 RMC1-BPP 209
76027 MCBKSD 207 76099 QMTPSBK 65 76263 HV-60LL 68 76415 RMC1-BPP 211
76028 RBAGS-46 147 76099 QMTPSBK 72 76264 HV-72M 68 76416 VAK 159
76029 RBAGS-52 147 76099 QMTPSBK 121 76265 HV-72L 68 76418 EZP1OTK1 18
76030 RBAGS-58 147 76101 HV-18SS 68 76266 HV-72LL 68 76419 EZP1OTK2 18
76031 RBAGS-70 147 76102 HV-24SS 68 76267 HVP-18M 70 76450 MMP-624 39
76032 RBAS4-18 150 76103 HV-30SS 68 76268 HVP-18L 70 76451 MMP-630 39
76033 RBAS4-24 150 76104 HV-36SS 68 76269 HVP-24M 70 76452 MMP-636 39
76034 RBAS4-30 150 76105 HV-42SS 68 76270 HVP-24L 70 76453 MMP-642 39
76035 RBAS4-36 150 76106 HV-48SS 68 76271 HVP-30M 70 76454 MMP-648 39
76036 RBAS4-42 150 76107 HV-54S 68 76272 HVP-30L 70 76455 MMP-654 39
76037 RBAS4-48 150 76108 HV-60S 68 76273 HVP-36M 70 76456 MMP-660 39
76038 RBAS4-54 150 76109 HV-72S 68 76274 HVP-36L 70 76457 MMP-672 39
76039 RBAS4-60 150 76110 H78P18 72 76275 HVP-42M 70 76458 MMPCP24 45
76040 RBAS4-72 150 76111 H78P24 72 76276 HVP-42L 70 76458 MMPCP24 53
76041 RBAER-10 151 76112 H78P30 72 76277 HVP-48M 70 76459 MMPCP30 45
76042 RBAER-16 151 76113 H78P36 72 76278 HVP-48L 70 76459 MMPCP30 53
76043 RBAER-22 151 76114 H78P42 72 76279 HVP-48LL 70 76460 MMPCP36 45
76045 RBAER-34 151 76116 H78P54 72 76281 HVP-54L 70 76461 MMPCP42 45
76046 RBAER-40 151 76117 H78P60 72 76282 HVP-54LL 70 76461 MMPCP42 53
76048 RBAER-52 151 76124 HVP-18S 70 76284 HVP-60L 70 76462 MMPCP48 53
76049 RBAER-58 151 76125 HVP-24S 70 76285 HVP-60LL 70 76463 MMPCP54 45
76050 RBAER-70 151 76126 HVP-30S 70 76286 HVP-72M 70 76463 MMPCP54 53
76069 AWTNCB 45 76127 HVP-36S 70 76287 HVP-72L 70 76464 MMPCP60 45
76069 AWTNCB 53 76128 HVP-42S 70 76288 HVP-72LL 70 76464 MMPCP60 53
76069 AWTNCB 58 76129 HVP-48S 70 76289 HXF2-18S 66 76465 MMPCP72 45
76071 SSTSMB 131 76130 HVP-54S 70 76290 HXF2-18M 66 76465 MMPCP72 53
76072 SSTLMB 131 76131 HVP-60S 70 76291 HXF2-24S 66 76466 MMPBPK 45
76073 SSTOTA 131 76132 HVP-72S 70 76292 HXF2-24M 66 76466 MMPBPK 146

Index by Item Code
76981 FL-M 212 76597 CRB-HT34 15 76672 CBC42 130 76779 USP60/1500 121
76982 FL-L 212 76597 CRB-HT34 21 76673 CBC48 130 76780 USP72/1800 121
76472 FLEL-M 212 76597 CRB-HT34 35 76674 CBC54 130 76781 USP84/2100 121
76473 FLEL-L 212 76598 CRB-HT40 15 76675 CBC60 130 76784 UPSBK 121
76474 FLELP 212 76598 CRB-HT40 21 76692 CPB 130 76785 UPBK 121
77408 FLTW-M 212 76598 CRB-HT40 35 76695 MSPP66 126 76788 ABU 121
77409 FLTW-L 212 76599 CRB-HT46 15 76697 TRB78 43 76788 ABU 121
76478 FLRP 212 76599 CRB-HT46 21 76697 TRB78 146 76788 ABU 122
76479 FLCP 212 76599 CRB-HT46 35 76700 UTV18 118 76789 UMBK 121
77406 FLRLB-L 212 76600 CRB-HT52 15 76701 UTV24 118 76789 UMBK 121
77405 FLRLB-M 212 76600 CRB-HT52 21 76702 UTV30 118 76790 USPK 121
76483 QMT-G 37 76600 CRB-HT52 35 76703 UTV36 118 76790 USPK 121
76483 QMT-G 45 76601 CRB-HT58 15 76704 UTV42 118 76791 UHSPK 121
76484 QMTS-G 37 76601 CRB-HT58 21 76705 UTV48 118 76791 UHSPK 121
76484 QMTS-G 45 76601 CRB-HT58 35 76706 UTV54 118 76792 USMK 121
76485 TRB18 43 76602 CRB-HT64 15 76707 UTV60 118 76792 USMK 121
76485 TRB18 146 76602 CRB-HT64 21 76708 UTV72 118 76793 UHMK 121
76486 TRB24 43 76602 CRB-HT64 35 76709 UTV84 118 76793 UHMK 121
76486 TRB24 146 76603 CRB-HT70 15 76712 UTC18 118 76794 UST-P 121
76487 TRB30 43 76603 CRB-HT70 21 76713 UTC24 118 76795 UST-W 121
76487 TRB30 146 76603 CRB-HT70 35 76714 UTC30 118 76796 MSP-284 33
76488 TRB36 43 76613 MHS-24R 99 76715 UTC36 118 76797 MSP-884 33
76488 TRB36 146 76614 MHS-30R 99 76716 UTC42 118 76798 MMP-684 39
76489 TRB42 43 76615 MHS-36R 99 76717 UTC48 118 76799 MMP-1284 39
76489 TRB42 146 76616 MHS-42R 99 76718 UTC54 118 76800 MHCP-84S 54
76490 TRB48 43 76617 MHS-48R 99 76719 UTC60 118 76803 MHS-84 96
76490 TRB48 146 76618 MHS-54R 99 76720 UTC72 118 76804 MHS-84V 96
76491 TRB54 43 76619 MHS-60R 99 76721 UTC84 118 76805 MHS-84RV 99
76491 TRB54 146 76620 MHS-72R 99 76724 UTF18 118 76806 MDWS-84 123
76492 TRB60 43 76621 MHS-84R 99 76725 UTF24 118 76807 MSPP84 37
76492 TRB60 146 76622 PFRS 99 76726 UTF30 118 76808 MMPCP84 45
76493 TRB66 43 76622 PFRS 103 76727 UTF36 118 76808 MMPCP84 53
76493 TRB66 146 76622 PFRS 105 76728 UTF42 118 76809 MHCP-BPA84 56
76494 TRB72 43 76622 PFRS 114 76729 UTF48 118 76810 MHCP-BCK84 56
76494 TRB72 146 76622 PFRS 117 76730 UTF54 118 76811 MHP-CP84 58
76537 MMPK 131 76636 SSTBK-W 103 76731 UTF60 118 76812 MHCP-2BC84 58
76538 RMC1-LSBPP 209 76636 SSTBK-W 105 76732 UTF72 118 76814 MHSP-84 103
76540 QMTBK-G 37 76636 SSTBK-W 117 76733 UTF84 118 76815 DWP-84 126
76540 QMTBK-G 38 76636 SSTBK-W 126 76736 URVB18/450 118 76816 DRXL-24-420 180
76540 QMTBK-G 45 76637 SSTBK-B 103 76736 URVB18/450 119 76817 DRXL-30-420 180
76540 QMTBK-G 46 76637 SSTBK-B 105 76737 URVB24/600 118 76818 DRXL-36-420 180
76551 MMP-1230 39 76637 SSTBK-B 117 76737 URVB24/600 119 76819 DRXL-42-420 180
76552 MMP-1236 39 76637 SSTBK-B 126 76738 URVB30/750 118 76820 DRXL-48-420 180
76553 MMP-1242 39 76638 MHCP-2BC24 58 76738 URVB30/750 119 76821 DRXL-54-420 180
76558 RMC2-FS-1 211 76643 MHCP-2BC54 58 76741 URVB48/1200 118 76826 DRXL-36-520 180
76559 RMC2-FSAPK 211 76644 MHCP-2BC60 58 76741 URVB48/1200 119 76827 DRXL-42-520 180
76560 PFC-SS 103 76645 MHCP-2BC72 58 76742 URVB54/1350 118 76828 DRXL-48-520 180
76560 PFC-SS 105 76646 MHS-18RV 99 76742 URVB54/1350 119 76829 DRXL-54-520 180
76570 RB6SA 152 76647 MHS-24RV 99 76743 URVB60/1500 118 76830 DRXL-60-520 180
76571 RB6DH 153 76648 MHS-30RV 99 76743 URVB60/1500 119 76831 DRXL-72-520 180
76572 RBAGSCM-16 148 76649 MHS-36RV 99 76744 URVB72/1800 118 76832 DRXL-24-435 180
76576 RBAGSCM-40 148 76653 MHS-60RV 99 76748 URCB18/450 118 76836 DRXL-48-435 180
76577 RBAGSCM-46 148 76654 MHS-72RV 99 76749 URCB24/600 118 76837 DRXL-54-435 180
76578 RBAGSCM-52 148 76655 RBAER-44 151 76750 URCB30/750 118 76838 DRXL-60-435 180
76579 RBAGSCM-58 148 76658 HTF212 13 76751 URCB36/900 118 76839 DRXL-72-435 180
76581 RBAGSCM-70 148 76659 HTF218 13 76752 URCB42/1050 118 76840 DRXL-24-535 180
76593 CRB-HT10 15 76660 HTF224 13 76753 URCB48/1200 118 76841 DRXL-30-535 180
76594 CRB-HT16 35 76665 HTF254 13 76772 USP18/450 121 76846 DRXL-60-535 180
76595 CRB-HT22 15 76666 HTF260 13 76773 USP24/600 121 76847 DRXL-72-535 180
76595 CRB-HT22 21 76667 HTF272 13 76774 USP30/750 121 76848 DRXM-24-420 182
76595 CRB-HT22 35 76668 CBC18 130 76775 USP36/900 121 76849 DRXM-30-420 182
Index by Item Code
76853 DRXM-54-420 182 76926 IB4 172 77076 LSP48 28 77131 EZP-LS236 24
76854 DRXM-60-420 182 76926 IB4 180 77077 LSP54 28 77132 EZP-LS242 24
76855 DRXM-72-420 182 76926 IB4 182 77078 LSP60 28 77133 EZP-LS248 24
76856 DRXM-24-520 182 76926 IB4 184 77079 LSP12-S/S 32 77134 EZP-LS254 24
76864 DRXM-24-435 182 76928 IBBK 163 77087 LSP60-S/S 32 77142 EZP-LS854 24
76865 DRXM-30-435 182 76928 IBBK 166 77088 CRB-LS10 26 77143 EZP-LS860 24
76866 DRXM-36-435 182 76928 IBBK 169 77088 CRB-LS10 30 77144 CLSFG-212 29
76872 DRXM-24-535 182 76929 IBS-L4 180 77091 CRB-LS28 30 77150 CLSFG-248 29
76873 DRXM-30-535 182 76930 IBS-L5 180 77092 CRB-LS34 26 77151 CLSFG-254 29
76874 DRXM-36-535 182 76931 IBS-M4 172 77092 CRB-LS34 30 77152 CLSFG-260 29
76878 DRXM-60-535 182 76933 IBS-H4 184 77094 CRB-LS46 30 77156 CLSFG-836 29
76879 DRXM-72-535 182 76934 IBS-H5 184 77095 CRB-LS52 26 77157 CLSFG-842 29
76880 DRXH-24-420 184 76935 ISABK 186 77095 CRB-LS52 30 77158 CLSFG-848 29
76881 DRXH-30-420 184 76936 IMK 180 77096 CRB-LS58 26 77159 CLSFG-854 29
76882 DRXH-36-420 184 76936 IMK 182 77096 CRB-LS58 30 77160 CLSFG-860 29
76883 DRXH-42-420 184 76936 IMK 184 77097 CRB-LS10W 26 77250 FL-PKIT-ML 212
76884 DRXH-48-420 184 76937 IEA-42-60 186 77097 CRB-LS10W 30 77251 FL-PKIT-XL 212
76885 DRXH-54-420 184 76938 IEA-72-96 186 77098 CRB-LS16W 26 77259 UTV450J-S/S 119
76886 DRXH-60-420 184 76939 HW-IMPB 188 77098 CRB-LS16W 30 77260 UTV600J-S/S 119
76887 DRXH-72-420 184 76940 CRB76 15 77099 CRB-LS22W 26 77261 UTV750J-S/S 119
76893 DRXH-54-520 184 76942 CDWB84 123 77102 CRB-LS40W 26 77269 UTV1800J-S/S 119
76894 DRXH-60-520 184 76943 SST-BUK 103 77102 CRB-LS40W 30 77271 UTV2100J-S/S 119
76895 DRXH-72-520 184 76943 SST-BUK 126 77103 CRB-LS46W 26 77324 MMKU 121
76896 DRXH-24-435 184 76950 OIBBK 188 77103 CRB-LS46W 30 77327 MMKUHD 121
76897 DRXH-30-435 184 76965 IB4-1U 188 77104 CRB-LS52W 26 77330 RMC2 211
76898 DRXH-36-435 184 76966 IB5-1U 188 77104 CRB-LS52W 30 77331 HDARK-S/S 122
76899 DRXH-42-435 184 76967 RBAGS-18 147 77105 CRB-LS58W 26 77332 STJM-S/S 122
76900 DRXH-48-435 184 76968 RBAGS-24 147 77105 CRB-LS58W 30 77334 STJK-S/S 122
76901 DRXH-54-435 184 76969 RBAGS-30 147 77106 RBAGM-16 28 77339 USP18/450-S/S 122
76909 DRXH-54-535 184 76977 UBTK 121 77110 RBAGM-40 28 77349 USP72/1800-S/S 122
76910 DRXH-60-535 184 76978 UHDBTK 121 77110 RBAGM-40 147 77351 USP84/2100-S/S 122
76911 DRXH-72-535 184 77386 FL-XL 212 77111 RBAGM-46 28 77357 MMKU-S/S 122
76912 DRXD-42-520 186 77406 FLVRL-XL 212 77111 RBAGM-46 147 77358 MMKUHD-S/S 122
76913 DRXD-48-520 186 77410 FLTW-XL 212 77114 LS-BP 28 77364 HARK-S/S 122
76914 DRXD-54-520 186 76986 FLELK-XL 212 77115 LS-BP-S/S 32 77365 LS-SPK 28
76915 DRXD-60-520 186 77037 CSTBK 117 77117 LS-SW 28 77366 LSTMPK 28
76916 DRXD-72-520 186 77047 TRB84 43 77118 LS-SS 28 77367 LSTPB-RK 28
76917 DRXD-84-520 186 77047 TRB84 146 77120 LST-TAK 28 77384 EZPTBT 19
76918 DRXD-96-520 186 77048 TRB90 43 77121 LST-P 28 77385 EZPTBTHD 19
76919 DRXD-42-535 186 77048 TRB90 146 77122 LST-W 28 77387 SPG-CVR-A 132
76920 DRXD-48-535 186 77052 SACSK 117 77123 LST-S 28 77388 SPG-CVR-B 132
76921 DRXD-54-535 186 77065 SACSRC 117 77124 LST-B-S/S 32 77389 SPG-CVR-C 132
76922 DRXD-60-535 186 77070 LSP12 28 77125 LST-W-S/S 32 77390 SPG-CVR-D 132
76923 DRXD-72-535 186 77071 LSP18 28 77126 LST-W-S/S-2 32 77391 SPG-CVR-E 132
76924 DRXD-84-535 186 77072 LSP24 28 77127 EZP-LS212 24 77392 SPG-CVR-F 132
76925 DRXD-96-535 186 77073 LSP30 28 77128 EZP-LS218 24 77393 SPG-CVR-G 132
76926 IB4 166 77074 LSP36 28 77129 EZP-LS224 24 77423 RAPEK 131
76926 IB4 169 77075 LSP42 28 77130 EZP-LS230 24 77424 MMP-624-S/S 40

Index by Item Code
77425 MMP-630-S/S 40 77548 SHIM-KITL 166 77620 MHSP24-S/S 105 77699 PTS-PA 199
77426 MMP-636-S/S 40 77548 SHIM-KITL 169 77621 MHSP30-S/S 105 77700 PTS-MBK 199
77427 MMP-642-S/S 40 77548 SHIM-KITL 180 77622 MHSP36-S/S 105 77701 PTS-MBKUG 199
77428 MMP-648-S/S 40 77549 SHIM-KITM 172 77623 MHSP42-S/S 105 77702 PTS-EBK 199
77429 MMP-654-S/S 40 77549 SHIM-KITM 182 77624 MHSP48-S/S 105 77703 MHP-624 47
77430 MMP-660-S/S 40 77550 SHIM-KITH 184 77625 MHSP54-S/S 105 77704 MHP-630 47
77431 MMP-672-S/S 40 77551 CRB-LS10HT 26 77626 MHSP60-S/S 105 77705 MHP-636 47
77434 MMP-1236-S/S 40 77552 CRB-LS16HT 30 77630 STS-W-S/S 105 77708 MHP-654 47
77435 MMP-1242-S/S 40 77553 CRB-LS22HT 26 77631 STS-S-S/S 105 77709 MHP-660 47
77436 MMP-1248-S/S 40 77553 CRB-LS22HT 30 77632 STS-B-S/S 105 77710 MHP-672 47
77437 MMP-1254-S/S 40 77554 CRB-LS28HT 26 77633 STHDPM2-S/S 105 77711 MHP-684 47
77438 MMP-1260-S/S 40 77554 CRB-LS28HT 30 77634 STHDMK2-S/S 105 77712 MHP-696 47
77439 MMP-1272-S/S 40 77555 CRB-LS34HT 26 77635 STGK2-S/S 105 77713 MHP-1230 47
77440 MMP-1284-S/S 40 77555 CRB-LS34HT 30 77636 SST-BUK-S/S 105 77714 MHP-1236 47
77442 PSTA-S/S 38 77556 CRB-LS40HT 26 77637 SST2HD-W-S/S 105 77715 MHP-1242 47
77442 PSTA-S/S 46 77556 CRB-LS40HT 30 77638 SST2HD-S-S/S 105 77716 MHP-1248 47
77443 TEN-LOCK-KIT 132 77557 CRB-LS46HT 26 77639 SST2HD-B-S/S 105 77717 MHP-1254 47
77450 QMTS-P-S/S 23 77557 CRB-LS46HT 30 77640 MHS-24R-S/S 101 77718 MHP-1260 47
77451 QMTS-W-S/S 23 77559 CRB-LS58HT 26 77643 MHS-42R-S/S 101 77721 MHP-1296 47
77451 QMTS-W-S/S 38 77559 CRB-LS58HT 30 77644 MHS-48R-S/S 101 77722 MMPCP96 45
77451 QMTS-W-S/S 46 77575 MMP-1836 39 77645 MHS-54R-S/S 101 77722 MMPCP96 53
77452 QMTS-G-S/S 23 77576 MMP-1842 39 77646 MHS-60R-S/S 101 77723 PST2-W 53
77453 MSP-224-S/S 34 77579 MMP-1860 39 77649 MHS-24RV-S/S 101 77724 PST2-S 53
77456 MSP-242-S/S 34 79040 MMP-1896 39 77652 MHS-42RV-S/S 101 77725 PST2-R 53
77457 MSP-248-S/S 34 77582 MSPMPK-S/S 38 77653 MHS-48RV-S/S 101 77725 PST2-R 56
77458 MSP-254-S/S 34 77582 MSPMPK-S/S 46 77654 MHS-54RV-S/S 101 77725 PST2-R 58
77459 MSP-260-S/S 34 77583 MSPBPK-S/S 23 77655 MHS-60RV-S/S 101 77726 PSTS-R 53
77460 MSP-272-S/S 34 77583 MSPBPK-S/S 38 77656 MHS-72RV-S/S 101 77726 PSTS-R 58
77461 MSP-284-S/S 34 77584 QMT-P-S/S 38 77657 MHS-84RV-S/S 101 77727 MHPMPK 53
77462 MSP-824-S/S 34 77584 QMT-P-S/S 46 77664 PTS-18R 197 77727 MHPMPK 58
77463 MSP-830-S/S 34 77585 QMT-W-S/S 38 77665 PTS-24R 197 77728 MHPBPK 53
77464 MSP-836-S/S 34 77585 QMT-W-S/S 46 77666 PTS-30R 197 77729 FLCK 212
77465 MSP-842-S/S 34 77586 QMT-G-S/S 38 77667 PTS-36R 197 77741 SPG-CVR-H 132
77466 MSP-848-S/S 34 77586 QMT-G-S/S 46 77668 PTS-42R 197 77742 CTS-W 117
77467 MSP-854-S/S 34 77587 QMTPAK-S/S 38 77669 PTS-48R 197 77743 CTS-S 81
77468 MSP-860-S/S 34 77587 QMTPAK-S/S 46 77670 PTS-54R 197 77743 CTS-S 117
77470 MSP-872-S/S 34 77588 QMTPSBK-S/S 38 77671 PTS-60R 197 77744 CTS-B 117
77471 MSP-884-S/S 34 77588 QMTPSBK-S/S 46 77672 PTS-72R 197 77745 CTS-G 117
77472 MSPP24-S/S 38 77590 MMPCP24-S/S 46 77673 PTS-30R-UG 197 77746 EZP-LS212HT 25
77479 MSPP72-S/S 38 77597 MMPCP72-S/S 46 77680 PTS-RR21 197 77753 EZP-LS254HT 25
77480 MSPP84-S/S 38 77598 MMPCP84-S/S 46 77681 PTS-RR27 197 77754 EZP-LS260HT 25
77517 RBDTXHD-6.5C 155 77599 MHP-EP-S/S 46 77682 PTS-RR33 197 77755 PTS-RHSAA 199
77524 MSPPL-S/S 38 77600 MMPBPK-S/S 46 77683 PTS-RR39 197 77756 PTS-LHSAA 199
77529 ISABK-LMH 180 77601 MHS-24-S/S 101 77683 PTS-RR39 197 77757 UST-S 121
77529 ISABK-LMH 182 77602 MHS-30-S/S 101 77684 PTS-RR45 197 77768 SACHP2 109
77529 ISABK-LMH 184 77603 MHS-36-S/S 101 77684 PTS-RR45 197 77768 SACHP2 113
77530 IBS-D5 186 77604 MHS-42-S/S 101 77685 PTS-RR51 197 77768 SACHP2 117
77531 MRB18 50 77605 MHS-48-S/S 101 77685 PTS-RR51 197 77840 MHS-24-ESAC 114
77536 MRB48 50 77610 MHS-24V-S/S 101 77688 PTS-RR69 197 77845 MHS-54-ESAC 114
77539 MRB66 50 77613 MHS-42V-S/S 101 77691 PTS-SR 199 77848 MHS-60-2ESAC 114
77540 MRB72 50 77614 MHS-48V-S/S 101 77692 PTS-HDSR 199 77849 MHS-72-2ESAC 114
77541 MRB78 50 77615 MHS-54V-S/S 101 77694 PTS-SAK 199 77850 MHS-84-2ESAC 114
77542 MRB84 50 77616 MHS-60V-S/S 101 77696 PTS-IBK 199 77851 MHS-96-2ESAC 114
77543 MRB90 50 77617 MHS-72V-S/S 101 77697 PTS-HIBK 199 77852 MHS-120-2ESAC 114
77548 SHIM-KITL 163 77618 MHS-84V-S/S 101 77698 PTS-PS 199 77853 MHS-24V-ESAC 114
Index by Item Code
77854 MHS-30V-ESAC 114 77893 SACPL-60/1500 113 77929 MHS-CARK-C24/600 115 78004 RV84-2ESAC 110
77857 MHS-48V-ESAC 114 77894 SACPL-72/1800 113 77932 MHS-CARK-C42/1050 115 78072 P-CARK-C24/600 107
77858 MHS-54V-ESAC 114 77894 SACPL-72/1800 117 77933 MHS-CARK-C48/1200 115 78073 P-CARK-C30/750 107
77859 MHS-60V-ESAC 114 77895 SACPL2-60/1500 109 77934 MHS-CARK-C54/1350 115 78074 P-CARK-C36/900 107
77860 MHS-72V-ESAC 114 77895 SACPL2-60/1500 113 77935 MHS-CARK-C60/1500 115 78075 P-CARK-C42/1050 107
77861 MHS-60V-2ESAC 114 77895 SACPL2-60/1500 117 77936 MHS-CARK-C72/1800 115 78076 P-CARK-C48/1200 107
77862 MHS-72V-2ESAC 114 77896 SACPL2-72/1800 109 77937 MHS-CARK-V24/600 115 78077 P-CARK-C54/1350 107
77865 MHS-120V-2ESAC 114 77897 SACPL2-84/2100 109 77940 MHS-CARK-V42/1050 115 78080 P-CARK-V24/600 107
77866 SAC2-TIP-TL 109 77897 SACPL2-84/2100 113 77941 MHS-CARK-V48/1200 115 78081 P-CARK-V30/750 107
77867 STGK2 103 77898 SACPL2-96/2400 113 77944 MHS-CARK-V72/1800 115 78084 P-CARK-V48/1200 107
77867 STGK2 104 77898 SACPL2-96/2400 117 77945 MHS-CARK2-C60/1500 115 78085 P-CARK-V54/1350 107
77867 STGK2 126 77899 SACPL2-120/3000 117 77948 MHS-CARK2-C96/2400 115 78088 P-CARK2-C60/1500 107
77868 SSTHDPM 103 77900 CART-24/600 109 77949 MHS-CARK2-C120/3000 115 78089 P-CARK2-C72/1800 107
77868 SSTHDPM 117 77900 CART-24/600 113 77950 MHS-CARK2-V60/1500 115 78090 P-CARK2-C84/2100 107
77868 SSTHDPM 126 77900 CART-24/600 117 77951 MHS-CARK2-V72/1800 115 78091 P-CARK2-C96/2400 107
77869 CSTHDPM 117 77901 CART-30/750 109 77952 MHS-CARK2-V84/2100 115 78092 P-CARK2-C120/3000 107
77870 SSTHDMK 103 77901 CART-30/750 113 77953 MHS-CARK2-V96/2400 115 78093 P-CARK2-V60/1500 107
77870 SSTHDMK 117 77901 CART-30/750 117 77954 MHS-CARK2-V120/3000 115 78094 P-CARK2-V72/1800 107
77870 SSTHDMK 126 77902 CART-36/900 109 77955 PC24-ESAC 106 78095 P-CARK2-V84/2100 107
77871 CSTHDMK 117 77902 CART-36/900 113 77956 PC30-ESAC 106 78096 P-CARK2-V96/2400 107
77872 CST1HD-W 117 77902 CART-36/900 117 77957 PC36-ESAC 106 78097 P-CARK2-V120/3000 107
77873 CST1HD-S 117 77903 CART-42/1050 109 77958 PC42-ESAC 106 78098 R-CARK-C24/600 111
77874 CST1HD-B 117 77903 CART-42/1050 113 77959 PC48-ESAC 106 78099 R-CARK-C30/750 111
77875 CST1HD-G 117 77903 CART-42/1050 117 77960 PC54-ESAC 106 78100 R-CARK-C36/900 111
77876 SST1HD-W 117 77904 CART-48/1200 109 77961 PC60-ESAC 106 78101 R-CARK-C42/1050 111
77877 SST1HD-S 117 77904 CART-48/1200 113 77962 PC72-ESAC 106 78102 R-CARK-C48/1200 111
77878 SST1HD-B 117 77904 CART-48/1200 117 77963 PC60-2ESAC 106 78103 R-CARK-C54/1350 111
77879 SST2HD-W 103 77905 CART-54/1350 109 77964 PC72-2ESAC 106 78104 R-CARK-C60/1500 111
77879 SST2HD-W 126 77905 CART-54/1350 113 77965 PC84-2ESAC 106 78105 R-CARK-C72/1800 111
77880 SST2HD-S 103 77905 CART-54/1350 117 77966 PC96-2ESAC 106 78106 R-CARK-V24/600 111
77880 SST2HD-S 126 77906 CART-60/1500 109 77967 PC120-2ESAC 106 78107 R-CARK-V30/750 111
77881 SST2HD-B 103 77906 CART-60/1500 113 77968 RC24-ESAC 110 78108 R-CARK-V36/900 111
77881 SST2HD-B 126 77906 CART-60/1500 117 77969 RC30-ESAC 110 78109 R-CARK-V42/1050 111
77882 SACRKN 109 77907 CART-72/1800 109 77970 RC36-ESAC 110 78110 R-CARK-V48/1200 111
77883 SACRH 109 77908 CART2-60/1500 109 77973 RC54-ESAC 110 78113 R-CARK-V72/1800 111
77883 SACRH 113 77908 CART2-60/1500 113 77974 RC60-ESAC 110 78114 R-CARK2-C60/1500 111
77883 SACRH 117 77908 CART2-60/1500 117 77975 RC72-ESAC 110 78115 R-CARK2-C72/1800 111
77884 SACRHL 109 77909 CART2-72/1800 109 77976 RC60-2ESAC 110 78116 R-CARK2-C84/2100 111
77885 SACKRP 109 77910 CART2-84/2100 109 77979 RC96-2ESAC 110 78119 R-CARK2-V60/1500 111
77885 SACKRP 113 77910 CART2-84/2100 113 77980 RC120-2ESAC 110 78120 R-CARK2-V72/1800 111
77885 SACKRP 117 77910 CART2-84/2100 117 77981 PV24-ESAC 106 78121 R-CARK2-V84/2100 111
77886 SACRKT 109 77911 CART2-96/2400 109 77982 PV30-ESAC 106 78122 R-CARK2-V96/2400 111
77886 SACRKT 113 77911 CART2-96/2400 113 77983 PV36-ESAC 106 78123 R-CARK2-V120/3000 111
77886 SACRKT 117 77911 CART2-96/2400 117 77984 PV42-ESAC 106 78142 STS-G 103
77887 SACPL-24/600 109 77912 CART2-120/3000 109 77985 PV48-ESAC 106 78142 STS-G 126
77887 SACPL-24/600 113 77912 CART2-120/3000 113 77986 PV54-ESAC 106 78387 CTS-B-S/S 32
77887 SACPL-24/600 117 77912 CART2-120/3000 117 77987 PV60-ESAC 106 78402 RV-18 90
77888 SACPL-30/750 109 77913 PCAP-24/600 109 77988 PV72-ESAC 106 78403 RV-24 90
77888 SACPL-30/750 113 77914 PCAP-30/750 109 77989 PV60-2ESAC 106 78404 RV-30 90
77890 SACPL-42/1050 109 77919 PCAP-60/1500 109 77994 RV24-ESAC 110 78409 RV-60 90
77890 SACPL-42/1050 113 77920 PCAP-72/1800 109 77995 RV30-ESAC 110 78414 PP-18 89
77890 SACPL-42/1050 117 77921 RCAP-24/600 113 77996 RV36-ESAC 110 78415 PV-24 86
77891 SACPL-48/1200 109 77922 RCAP-30/750 113 77997 RV42-ESAC 110 78416 PP-24 89
77892 SACPL-54/1350 117 77927 RCAP-60/1500 113 78002 RV60-2ESAC 110 78421 PV-42 86
77893 SACPL-60/1500 109 77928 RCAP-72/1800 113 78003 RV72-2ESAC 110 78422 PP-42 89

Index by Item Code
78423 PV-48 86 78598 MHP-1896 47 78716 MMP-1236P 41 78794 PATHK 42
78424 PP-48 89 78599 MHP-624P 48 78717 MMP-1242P 41 78794 PATHK 42
78425 PP-54 89 78600 MHP-630P 48 78718 MMP-1248P 41 78794 PATHK 49
78426 RP-18 92 78601 MHP-636P 48 78719 MMP-1254P 41 78794 PATHK 49
78430 RP-42 92 78605 MHP-660P 48 78723 MHCP-24P 54 78794 PATHK 100
78433 RP-60 92 78608 MHP-696P 48 78726 MHCP-42P 54 78799 PANK 42
78451 PP-60 89 78609 MHP-1230P 48 78727 MHCP-48P 54 78799 PANK 49
78453 PV-18 86 78610 MHP-1236P 48 78728 MHCP-54P 54 78799 PANK 55
78462 LSTMPK2-S/S 32 78613 MHP-1254P 48 78731 MHCP-84P 54 78801 H-MK2 139
78471 CRB-W10 15 78614 MHP-1260P 48 78732 SAT2PM 104 78808 EST-P-S/S 23
78471 CRB-W10 21 78615 MHP-1272P 48 78732 SAT2PM 126 78809 EST-W-S/S 23
78471 CRB-W10 35 78616 MHP-1284P 48 78733 SAT2AK 103 78810 EST-G-S/S 23
78472 CRB-W16 15 78617 MHP-1296P 48 78733 SAT2AK 104 78812 EZP1P12-S/S 23
78472 CRB-W16 21 78618 MHP-1836P 48 78733 SAT2AK 126 78813 EZP1P18-S/S 23
78472 CRB-W16 35 78619 MHP-1842P 48 78735 SAT2PAT 104 78814 EZP1P24-S/S 23
78473 CRB-W22 15 78620 MHP-1848P 48 78735 SAT2PAT 126 78815 EZP1P30-S/S 23
78473 CRB-W22 21 78621 MHP-1854P 48 78736 MHS-24P 99 78816 EZP1P36-S/S 23
78475 CRB-W34 15 78669 MHP-2442 47 78741 MHS-54P 99 78821 EZP1P72-S/S 23
78475 CRB-W34 21 78670 MHP-2448 47 78742 MHS-60P 99 78838 CFG-212 20
78475 CRB-W34 35 78671 MHP-2454 47 78743 MHS-72P 99 78839 CFG-218 20
78476 CRB-W40 15 78672 MHP-2460 47 78744 MHS-84P 99 78840 CFG-224 20
78476 CRB-W40 21 78673 MHP-2472 47 78745 MDWS-24P 123 78841 CFG-230 20
78477 CRB-W46 21 78676 MHP-2442P 48 78748 MDWS-42P 123 78844 CFG-248 20
78478 CRB-W52 21 78679 MHP-2460P 48 78751 MDWS-60P 123 78848 EZP1PL-S/S 23
78478 CRB-W52 35 78680 MHP-2472P 48 78752 MDWS-72P 123 78849 ESTAK-EST-S/S 23
78479 CRB-W58 15 78681 MHP-2484P 48 78753 MDWS-84P 123 78850 LS-SW-S/S 32
78479 CRB-W58 21 78682 MHP-2496P 48 78754 TRB-HT18 43 78855 EZSB24-4C 161
78479 CRB-W58 35 78683 PACB60 45 78755 TRB-HT24 43 78856 EZSB30-4C 161
78488 EZP1T-212 12 78683 PACB60 53 78756 TRB-HT30 43 78857 EZSB36-4C 161
78489 EZP1T-218 12 78683 PACB60 58 78757 TRB-HT36 43 78858 EZSB42-4C 161
78490 EZP1T-224 12 78684 PAT1 42 78758 TRB-HT42 43 78859 EZSB48-4C 161
78497 EZP1T-272 12 78685 PAT2 55 78767 PTS-WMK 199 78866 EZSB42-5C 161
78498 EZP1T-818 12 78685 PAT2 100 78786 HAR-K 18 78867 EZSB48-5C 161
78499 EZP1T-824 12 78685 PAT2 124 78786 HAR-K 139 78868 EZSB54-5C 161
78500 EZP1T-830 12 78686 MMPCP96-S/S 46 78789 SB4 163 78869 EZSB60-5C 161
78501 EZP1T-836 12 78700 ICT6-S/S 105 78789 SB4 166 78870 EZSB72-5C 161
78502 EZP1T-842 12 78703 SAT2NCB 104 78789 SB4 169 78871 EZSB24-4I 164
78503 EZP1T-848 12 78703 SAT2NCB 126 78789 SB4 172 78872 EZSB30-4I 164
78504 EZP1T-854 12 78704 SAT2MK 104 78789 SB4 180 78873 EZSB36-4I 164
78505 EZP1T-860 12 78704 SAT2MK 126 78789 SB4 182 78874 EZSB42-4I 164
78506 EZP1T-872 12 78705 PAK 45 78789 SB4 184 78875 EZSB48-4I 164
78507 EZPTMPK 19 78705 PAK 53 78790 SB5 163 78876 EZSB54-4I 164
78508 EZPTCK 19 78705 PAK 56 78790 SB5 166 78877 EZSB60-4I 164
78509 EZPTCKHD 19 78705 PAK 58 78790 SB5 169 78878 EZSB72-4I 164
78510 EZPTSR 19 78706 MMP-624P 41 78790 SB5 172 78879 EZSB24-5I 164
78511 EZPTSK 19 78707 MMP-630P 41 78790 SB5 180 78880 EZSB30-5I 164
78512 EZPTSKHD 19 78708 MMP-636P 41 78790 SB5 182 78881 EZSB36-5I 164
78591 MHP-1836 47 78709 MMP-642P 41 78790 SB5 184 78882 EZSB42-5I 164
78592 MHP-1842 47 78710 MMP-648P 41 78790 SB5 186 78883 EZSB48-5I 164
78593 MHP-1848 47 78711 MMP-654P 41 78791 PATLK 42 78884 EZSB54-5I 164
78596 MHP-1872 47 78714 MMP-684P 41 78791 PATLK 100 78887 EZIB24-4L 167
78597 MHP-1884 47 78715 MMP-1230P 41 78791 PATLK 124 78888 EZIB30-4L 167
Index by Item Code
78889 EZIB36-4L 167 78953 EZBS-L4 169 78991 HP-24 139 79091 EZAI-24I 173
78892 EZIB54-4L 167 78955 MHCP-96S 54 78994 HP-42 139 79092 EZAI-30I 173
78893 EZIB60-4L 167 78956 MHCP-BPA96 56 78995 HP-48 139 79092 EZAI-30I 176
78894 EZIB72-4L 167 78957 MHCP-BCK96 56 78996 HP-54 139 79093 EZAI-36I 164
78895 EZIB24-5L 167 78958 MHP-CP96 58 78997 HP-60 139 79093 EZAI-36I 173
78896 EZIB30-5L 167 78959 MHCP-96P 54 78998 HP-72 139 79093 EZAI-36I 176
78897 EZIB36-5L 167 78970 EZWPK-24 163 79000 EZAI-24 161 79094 EZAI-42I 164
78903 EZIB24-4M 170 78971 EZWPK-30 169 79006 EZAI-60 161 79096 EZAI-54I 164
78904 EZIB30-4M 170 78971 EZWPK-30 172 79007 EZAI-72 161 79096 EZAI-54I 173
78905 EZIB36-4M 170 78972 EZWPK-36 163 79009 HDRBK 137 79096 EZAI-54I 176
78906 EZIB42-4M 170 78972 EZWPK-36 166 79010 HDR24 137 79097 EZAI-60I 164
78912 EZIB30-5M 170 78973 EZWPK-42 172 79016 HDR60 137 79099 LAGGING-TB2 217
78913 EZIB36-5M 170 78974 EZWPK-48 163 79017 HDRS72 137 79202 USTSCK 121
78914 EZIB42-5M 170 78974 EZWPK-48 166 79018 HDRS84 137 79204 USTSCKHD 121
78915 EZIB48-5M 170 78974 EZWPK-48 169 79019 HDRR24 137 79206 USPB2 121
78916 EZIB54-5M 170 78974 EZWPK-48 172 79020 HDRR30 137 79206 USPB2 122
78917 EZIB60-5M 170 78975 EZWPK-54 163 79021 HDRR36 137 79207 UHPB2 121
78918 EZIB72-5M 170 78975 EZWPK-54 166 79022 HDRR42 137 79207 UHPB2 122
78919 CCMK 77 78975 EZWPK-54 169 79023 HDRR48 137 79224 CCKL 77
78919 CCMK 140 78976 EZWPK-60 166 79026 HDRRS72 137 79224 CCKL 140
78920 CCMKHD 77 78976 EZWPK-60 169 79027 HDRRS84 137 79225 CCKHDL 77
78920 CCMKHD 109 78976 EZWPK-60 172 79033 MMP-696 39 79225 CCKHDL 109
78920 CCMKHD 113 78977 EZWPK-72 163 79034 MMP-1296 39 79225 CCKHDL 113
78920 CCMKHD 140 78977 EZWPK-72 166 79035 MMP-696-S/S 40 79225 CCKHDL 140
78923 EZP1MPK-S/S 23 78977 EZWPK-72 169 79036 MMP-1296-S/S 40 79228 CCKR 77
78924 CFG-818 20 78977 EZWPK-72 172 79037 MMP-696P 41 79228 CCKR 89
78925 CFG-824 20 78978 EZCSK-24 163 79038 MMP-1296P 41 79228 CCKR 92
78926 CFG-830 20 78978 EZCSK-24 166 79039 QMT-S 45 79228 CCKR 140
78927 CFG-836 20 78978 EZCSK-24 169 79039 QMT-S 65 79229 CCKHDR 77
78928 CFG-842 20 78978 EZCSK-24 172 79039 QMT-S 72 79229 CCKHDR 109
78929 CFG-848 20 78979 EZCSK-30 163 79041 SST2HD-G 103 79229 CCKHDR 113
78930 CFG-854 20 78979 EZCSK-30 166 79041 SST2HD-G 126 79229 CCKHDR 140
78931 CFG-860 20 78979 EZCSK-30 169 79042 SST2HD-G-S/S 105 79232 CCKTS 77
78933 LSTMPK-S/S 32 78979 EZCSK-30 172 79043 MHS-96 96 79232 CCKTS 89
78934 EZP1-212W 14 78980 EZCSK-36 163 79044 MHS-96V 96 79232 CCKTS 92
78935 EZP1-218W 14 78980 EZCSK-36 166 79045 MHS-96R 99 79232 CCKTS 140
78936 EZP1-224W 14 78980 EZCSK-36 169 79046 MHS-96RV 99 79233 CCKHDTS 77
78937 EZP1-230W 14 78980 EZCSK-36 172 79047 MHS-96P 99 79233 CCKHDTS 109
78938 EZP1-236W 14 78981 EZCSK-42 163 79048 MHS-96-S/S 101 79233 CCKHDTS 113
78939 EZP1-242W 14 78981 EZCSK-42 166 79049 MHS-96V-S/S 101 79233 CCKHDTS 140
78940 EZP1-248W 14 78981 EZCSK-42 169 79050 MHS-96R-S/S 101 79236 HDRGEK 137
78941 EZP1-254W 14 78981 EZCSK-42 172 79051 MHS-96RV-S/S 101 79267 PTP18R 200
78942 EZP1-260W 14 78982 EZCSK-48 163 79052 MHSP-96 103 79268 PTP24R 200
78944 EZBMK-24 169 78982 EZCSK-48 166 79053 MHSP96-S/S 105 79269 PTP30R 200
78944 EZBMK-24 172 78982 EZCSK-48 169 79056 QMTS-S-S/S 46 79270 PTP36R 200
78945 EZBMK-30 169 78982 EZCSK-48 172 79057 STS-G-S/S 105 79271 PTP42R 200
78945 EZBMK-30 172 78983 EZCSK-54 163 79059 QMT-S-S/S 46 79272 PTP48R 200
78946 EZBMK-36 169 78983 EZCSK-54 166 79060 DWP-96 126 79273 PTP54R 200
78946 EZBMK-36 172 78983 EZCSK-54 169 79062 CDWB96 123 79274 PTP60R 200
78947 EZBMK-42 169 78983 EZCSK-54 172 79063 MDWS-96 123 79275 PTP72R 200
78947 EZBMK-42 172 78984 EZCSK-60 163 79064 MDWS-96P 123 79276 PTPHD48R 200
78948 EZBMK-48 169 78984 EZCSK-60 166 79068 HTTS-HT 73 79277 PTPHD54R 200
78948 EZBMK-48 172 78984 EZCSK-60 169 79070 SSTHK 103 79278 PTPHD60R 200
78950 EZBMK-60 169 78985 EZCSK-72 166 79071 SSTHK-S/S 105 79281 PTPHD96R 200
78950 EZBMK-60 172 78985 EZCSK-72 169 79072 HDRBK-HD 137 79299 USTSC 121
78951 EZBMK-72 169 78985 EZCSK-72 172 79073 PFS-ESAC 114 79299 USTSC 121
78951 EZBMK-72 172 78986 MHCP-2BC96 58 79073 PFS-ESAC 117 79300 USTSCHD 121
78952 EZRMK 163 78987 H-MK1 139 79080 LAGGING-TB 217 79300 USTSCHD 121
78953 EZBS-L4 166 78990 HP-18 139 79091 EZAI-24I 164 79303 INDR-1212 133

Index by Item Code
79304 INDR-1218 133 79374 H2RC 65 79493 SSTLBK 103 79592 YTP-48/1200 81
79305 INDR-1824 133 79375 HV2SSTS 65 79493 SSTLBK 105 79593 YTA-18/450 81
79306 INDR-2424 133 79378 MSR2 206 79493 SSTLBK 117 79594 YTA-24/600 81
79307 INDR-1212S 133 79379 MIB2-1U 175 79493 SSTLBK 126 79595 YTA-30/750 81
79308 INDR-1218S 133 79379 MIB2-1U 178 79494 MBC-18 127 79596 YTA-36/900 81
79309 INDR-1824S 133 79380 PMSMK2 206 79495 MBC-24 127 79597 YTA-42/1050 81
79310 INDR-2424S 133 79381 MAK2 206 79496 MBC-30 127 79598 YTA-48/1200 81
79311 IDSC-1212 133 79382 MAKHD2 206 79497 MBC-36 127 79611 YCART-18/450-W 79
79312 IDSC-1218 133 79383 CLN460/18.4-12S 216 79498 MBC-42 127 79611 YCART-18/450-W 81
79313 IDSC-1824 133 79384 CLN600/24-12S 216 79499 MBC-48 127 79612 YCART-24/600-W 79
79314 IDSC-2424 133 79385 CLN760/30.4-12S 216 79500 MBC-54 127 79612 YCART-24/600-W 81
79315 IDSEAL 133 79387 CLN900/36-12S 216 79501 MBC-60 127 79613 YCART-30/750-W 79
79316 IDHINGE 133 79388 CLN1060/42.4-12S 216 79502 MBC-72 127 79613 YCART-30/750-W 81
79317 IDLATCH 133 79389 CLN1200/48-12S 216 79503 MBC-84 127 79614 YCART-36/900-W 79
79318 EZIRMK 166 79390 CLN1360/54.4-12S 216 79504 MBDS-18 129 79614 YCART-36/900-W 81
79320 UPFCC 98 79392 CLN1520/60.8-12S 216 79505 MBDS-24 129 79615 YCART-42/1050-W 79
79320 UPFCC 103 79395 CLN1800/72-12S 216 79506 MBDS-30 129 79615 YCART-42/1050-W 81
79323 HV2-18SS 63 79398 CLN2100/84-12S 216 79507 MBDS-36 129 79616 YCART-48/1200-W 79
79324 HV2-18S 63 79406 CLFR460/18.4-12S 216 79508 MBDS-42 129 79616 YCART-48/1200-W 81
79325 HV2-18M 63 79407 CLFR600/24-12S 216 79509 MBDS-48 129 79617 YCART-18/450-P 79
79326 HV2-24SS 63 79408 CLFR760/30.4-12S 216 79510 MBDS-54 129 79617 YCART-18/450-P 81
79327 HV2-24S 63 79410 CLFR900/36-12S 216 79511 MBDS-60 129 79618 YCART-24/600-P 79
79328 HV2-24M 63 79411 CLFR1060/42.4-12S 216 79512 MBDS-72 129 79618 YCART-24/600-P 81
79329 HV2-30SS 63 79412 CLFR1200/48-12S 216 79513 MBDS-84 129 79619 YCART-30/750-P 79
79330 HV2-30S 63 79413 CLFR1360/54.4-12S 216 79514 MBRD-18 127 79619 YCART-30/750-P 81
79331 HV2-30M 63 79415 CLFR1520/60.8-12S 216 79514 MBRD-18 129 79620 YCART-36/900-P 79
79332 HV2-36SS 63 79418 CLFR1800/72-12S 216 79515 MBRD-24 127 79620 YCART-36/900-P 81
79333 HV2-36S 63 79421 CLFR2100/84-12S 216 79515 MBRD-24 129 79621 YCART-42/1050-P 79
79334 HV2-36M 63 79431 MSTHD-W 95 79516 MBRD-30 127 79621 YCART-42/1050-P 81
79335 HV2-36L 63 79431 MSTHD-W 104 79516 MBRD-30 129 79622 YCART-48/1200-P 79
79336 HV2-42SS 63 79432 MSTHD-S 95 79517 MBRD-36 127 79622 YCART-48/1200-P 81
79337 HV2-42S 63 79432 MSTHD-S 104 79517 MBRD-36 129 79623 YTAC 81
79338 HV2-42M 63 79433 MSTHD-B 95 79518 MBRD-42 127 79624 MHS-18RMV 97
79339 HV2-42L 63 79433 MSTHD-B 104 79518 MBRD-42 129 79625 MHS-24RMV 97
79340 HV2-42LL 63 79434 MSTDB 93 79519 MBRD-48 127 79626 MHS-30RMV 97
79341 HV2-48SS 63 79434 MSTDB 95 79519 MBRD-48 129 79627 MHS-36RMV 97
79342 HV2-48S 63 79434 MSTDB 104 79520 MBRD-54 127 79628 MHS-42RMV 97
79343 HV2-48M 63 79434 MSTDB 131 79520 MBRD-54 129 79629 MHS-48RMV 97
79344 HV2-48L 63 79435 MSTAM 95 79521 MBRD-60 127 79630 MHS-54RMV 97
79345 HV2-48LL 63 79435 MSTAM 104 79521 MBRD-60 129 79631 MHS-60RMV 97
79346 HV2-54S 63 79436 MST-MBL 95 79522 MBRD-72 127 79632 MHS-72RMV 97
79347 HV2-54M 63 79436 MST-MBL 104 79522 MBRD-72 129 90545 FMS-18 93
79348 HV2-54L 63 79437 MST-MBR 95 79523 MBRD-84 127 90546 FMS-24 93
79349 HV2-54LL 63 79437 MST-MBR 104 79523 MBRD-84 129 90547 FMS-30 93
79350 HV2-60S 63 79439 MSTCHD 95 79524 MBCMK 129 90548 FMS-36 93
79351 HV2-60M 63 79439 MSTCHD 104 79525 MBCBC 129 90549 FMS-42 93
79352 HV2-60L 63 79440 MSTBK 95 79526 MBCB 129 90550 FMS-48 93
79353 HV2-60LL 63 79440 MSTBK 104 79527 MBADB 129 90551 FMS-54 93
79354 HV2-72S 63 79441 MSTGT 95 79528 MBCBM 129 90552 FMS-60 93
79355 HV2-72M 63 79441 MSTGT 104 79529 MBCM-1 129 90553 FMS-72 93
79356 HV2-72L 63 79442 MHS-18V-MST 97 79530 MBCM-2 129 79646 FMS-18V 93
79357 HV2-72LL 63 79443 MHS-24V-MST 97 79531 MBCTA 129 79647 FMS-24V 93
79358 H2P18 65 79444 MHS-30V-MST 97 79532 MBCBL 129 79648 FMS-30V 93
79359 H2P24 65 79445 MHS-36V-MST 97 79533 MBCMKK 129 79649 FMS-36V 93
79360 H2P30 65 79446 MHS-42V-MST 97 79534 MBCEC 129 79650 FMS-42V 93
79361 H2P36 65 79447 MHS-48V-MST 97 79535 STLP 129 79651 FMS-48V 93
79362 H2P42 65 79448 MHS-54V-MST 97 79536 MBCDBK 127 79652 FMS-54V 93
79365 H2P60 65 79451 MSTPMHD 95 79571 MFASKHD 206 79656 PACB100 104
79366 H2P72 65 79451 MSTPMHD 104 79572 YT-W 79 79656 PACB100 126
79367 HV2T-S/S 63 79453 UHVC 65 79572 YT-W 81 79665 PTMHD54VR 203
79367 HV2T-S/S 65 79470 PTPLB 202 79573 YT-P 79 79666 PTMHD60VR 203
79368 HV2PT 63 79473 PTPLB-HD 202 79573 YT-P 81 79667 PTMHD72VR 203
79368 HV2PT 65 79476 PTP-RPA 202 79574 YT-C 79 79668 PTMHD84VR 203
79369 H2SA6SS 63 79478 PTP-HDRPA 202 79574 YT-C 81 79669 PTM24VR 203
79369 H2SA6SS 65 79481 RB38BP 148 79582 SSTHB 103 79670 PTM30VR 203
79370 H2SA6S 63 79481 RB38BP 150 79582 SSTHB 117 79671 PTM36VR 203
79370 H2SA6S 65 79481 RB38BP 151 79582 SSTHB 126 79672 PTM42VR 203
79371 H2SA6M 63 79484 PTP-EBKR 202 79586 SSTHB-S/S 105 79673 PTM48VR 203
79371 H2SA6M 65 79486 PTP-HDEBKR 202 79587 YTP-18/450 81 79674 PTM54VR 203
79372 H2SA6L 63 79488 PTP-LS 202 79588 YTP-24/600 81 79675 PTM60VR 203
79372 H2SA6L 65 79490 PTP-RMB 202 79589 YTP-30/750 81 79676 YT-HDW 83
79373 H2SA6LL 63 79491 PTP-RRB 202 79590 YTP-36/900 81 79676 YT-HDW 85
79373 H2SA6LL 65 79492 PTP-HDRBK 202 79591 YTP-42/1050 81 79677 YT-HDP 83
Index by Item Code
79677 YT-HDP 85 79809 YTAHD-60/1500 85 79856 YSTHDBK-B 85 82885 USMK-S/S-M 122
79699 FMSC 95 79810 YTAHD-72/1800 85 79857 YSTANK 81 82886 USMKHD-S/S-M 122
79728 YT-HDC 83 79811 YCART-18/450-TC 79 79858 YSTANKHD 85 90000 AWTPBA 45
79728 YT-HDC 85 79811 YCART-18/450-TC 81 79861 RBSE-10 149 90000 AWTPBA 53
79738 MHS-24RU 98 79812 YCART-24/600-TC 79 79862 RBSE-16 149 90000 AWTPBA 58
79739 MHS-30RU 98 79812 YCART-24/600-TC 81 79863 RBSE-22 149 90001 PTM24T-S/S 204
79746 MHS-84RU 98 79816 YCART-48/1200-TC 79 79870 RBSE-64 149 90008 PTMHD54T-S/S 204
79747 MHS-96RU 98 79816 YCART-48/1200-TC 81 79871 RBSE-70 149 90009 PTMHD60T-S/S 204
79748 MHS-18RUV 98 79817 YCART-36/900-HDP 83 79891 JNK-A 18 90010 PTMHD72T-S/S 204
79749 MHS-24RUV 98 79817 YCART-36/900-HDP 85 79892 JNK-B 28 90011 PTMHD84T-S/S 204
79750 MHS-30RUV 98 79818 YCART-42/1050-HDP 83 79893 JNK-C 37 90012 PTM24R-S/S 204
79757 MHS-84RUV 98 79821 YCART-60/1500-HDP 85 79893 JNK-C 126 90019 PTMHD54R-S/S 204
79758 MHS-96RUV 98 79822 YCART-72/1800-HDP 83 79894 JNK-D 53 90020 PTMHD60R-S/S 204
79759 YT-TC-18S 78 79822 YCART-72/1800-HDP 85 79894 JNK-D 58 90021 PTMHD72R-S/S 204
79760 YT-TC-24S 78 79823 YCART-36/900-HDW 83 79895 JNK-E 117 90022 PTMHD84R-S/S 204
79761 YT-TC-30S 78 79823 YCART-36/900-HDW 85 79896 JNK-F 121 90023 PTM24VR-S/S 204
79762 YT-TC-36S 78 79824 YCART-42/1050-HDW 83 79908 MIB2-1UF 175 90024 PTM30VR-S/S 204
79763 YT-TC-42S 78 79824 YCART-42/1050-HDW 85 79908 MIB2-1UF 178 90025 PTM36VR-S/S 204
79764 YT-TC-48S 78 79825 YCART-48/1200-HDW 83 79914 MBC-18-575V 127 90026 PTM42VR-S/S 204
79765 YT-18S 78 79825 YCART-48/1200-HDW 85 79915 MBC-24-575V 127 90027 PTM48VR-S/S 204
79768 YT-36S 78 79827 YCART-60/1500-HDW 83 79918 MBC-42-575V 127 90030 PTMHD54VR-S/S 204
79771 YTW-18S 78 79828 YCART-72/1800-HDW 85 79921 MBC-60-575V 127 90033 PTMHD84VR-S/S 204
79772 YTW-24S 78 79829 YCART-36/900-HDTC 83 79922 MBC-72-575V 127 90034 PTMSD72T-S/S 204
79773 YTW-30S 78 79829 YCART-36/900-HDTC 85 79923 MBC-84-575V 127 90035 PTMSD84T-S/S 204
79774 YTW-36S 78 79830 YCART-42/1050-HDTC 83 79924 MBCM-575-1 129 90036 PTMSD96T-S/S 204
79775 YTW-42S 78 79830 YCART-42/1050-HDTC 85 79925 MBCM-575-2 129 90037 PTMSD120T-S/S 204
79776 YTW-48S 78 79831 YCART-48/1200-HDTC 83 79970 SB2 175 90038 PTMSD72R-S/S 204
79777 YTHD-TC-36S 82 79831 YCART-48/1200-HDTC 85 79970 SB2 178 90039 PTMSD84R-S/S 204
79778 YTHD-TC-42S 82 79832 YCART-54/1350-HDTC 83 79971 MIB24-2H 176 90040 PTMSD96R-S/S 204
79779 YTHD-TC-48S 82 79832 YCART-54/1350-HDTC 85 79972 MIB30-2H 176 90041 PTMSD120R-S/S 204
79780 YTHD-TC-54S 82 79833 YCART-60/1500-HDTC 83 79973 MIB36-2H 176 90042 PTMSD72VR-S/S 204
79783 YTHD-36S 82 79834 YCART-72/1800-HDTC 85 79976 MIB54-2H 176 90045 PTMSD120VR-S/S 204
79784 YTHD-42S 82 79835 YTACHD 85 79977 MIB60-2H 176 90046 MSR2-S/S 207
79785 YTHD-48S 82 79836 YST-Y 81 79978 MIB72-2H 176 90047 PMSMK2-S/S 207
79786 YTHD-54S 82 79837 YST-P 81 79979 MSB24-2I 173 90048 MAK2-S/S 207
79787 YTHD-60S 82 79838 YST-S 81 79980 MSB30-2I 173 90049 MAKHD2-S/S 207
79788 YTHD-72S 82 79839 YSTHD-GR 85 79981 MSB36-2I 173 90050 MFASKHD-S/S 207
79789 YTHDW-36S 82 79840 YSTHD-S 85 79982 MSB42-2I 173 90051 PTMSD72VR 203
79790 YTHDW-42S 82 79841 YSTHD-BL 85 79983 MSB48-2I 173 90052 PTMSD84VR 203
79791 YTHDW-48S 82 79842 YSTHD-BK 85 79984 MSB54-2I 173 90053 PTMSD96VR 203
79792 YTHDW-54S 82 79843 YSTMB 81 79985 MSB60-2I 173 90054 PTMSD120VR 203
79793 YTHDW-60S 82 79844 YSTDBK 78 79986 MSB72-2I 173 90055 MSRSD-S/S 207
79794 YTHDW-72S 82 79844 YSTDBK 81 79987 MSBRMK 175 90056 PMSMKSD-S/S 207
79795 YSTS-Y 81 79844 YSTDBK 131 79988 SB2F 175 90057 MAKSD-S/S 207
79796 YSTS-P 81 79845 YSTGBK 81 79988 SB2F 178 90100 PTS-DRK 199
79797 YSTHDS-GR 85 79846 YSTLBK 81 79989 SHIM-KITMOD 175 90237 MIB24CSK 175
79798 YSTHDS-BL 85 79847 YSTTBK-W 81 79989 SHIM-KITMOD 178 90237 MIB24CSK 178
79799 YTPHD-36/900 85 79848 YSTPMK 81 79991 MSB24RMK 173 90238 MIB30CSK 175
79800 YTPHD-42/1050 85 79849 YSTHDMB 85 79992 MSB30RMK 173 90238 MIB30CSK 178
79801 YTPHD-48/1200 85 79850 YSTHDDBK 82 79993 MSB36RMK 173 90239 MIB36CSK 175
79804 YTPHD-72/1800 85 79851 YSTHDGBK 85 79996 MSB54RMK 173 90240 MIB42CSK 178
79805 YTAHD-36/900 85 79852 YSTHDLBK 85 79997 MSB60RMK 173 90241 MIB48CSK 175
79806 YTAHD-42/1050 85 79853 YSTHDBK-W 85 79998 MSB72RMK 173 90241 MIB48CSK 178
79807 YTAHD-48/1200 85 79854 YSTPHDMK 85 82810 UPL-S/S-MT 122 90242 MIB54CSK 175
79808 YTAHD-54/1350 85 79855 YSTTBK-B 81 82811 UPLHD-S/S-MT 122 90242 MIB54CSK 178

Index by Item Code
90243 MIB60CSK 175 90394 MXP-648 59 90602 XDSTS-P 62 90647 RBP1R-M 190
90243 MIB60CSK 178 90395 MXP-654 59 90603 XDSTS-B 62 90648 RBP1R-L 190
90244 MIB72CSK 175 90396 MXP-660 59 90604 XDSTBK-W 62 90649 RBP1R-XL 190
90244 MIB72CSK 178 90397 MXP-672 59 90605 XDSTBK-P 62 90650 RBPRR-S 192
90245 MIB24WPK 175 90398 MXP-684 59 90606 XDSTBK-B 62 90651 RBPRR-M 192
90245 MIB24WPK 178 90399 MXP-696 59 90607 MXPPBK 62 90652 RBPRR-L 192
90246 MIB30WPK 175 90400 MXP-6120 59 90608 XDSTPSBK 62 90653 RBPRR-XL 192
90246 MIB30WPK 178 90409 USB12 59 90609 XDSTTAK 62 90762 CBC72 130
90247 MIB36WPK 175 90409 USB12 62 90610 XDSTJNK 62 90763 CBC84 130
90247 MIB36WPK 178 90410 USB6 59 90611 XDST-W 62 90795 PTEZHD-56/1400 193
90248 MIB42WPK 175 90410 USB6 62 90612 XDST-P 62 90796 PTEZHD-64/1600 193
90248 MIB42WPK 178 90411 USBP 62 90613 XDST-B 62 90797 PTEZHD-80/2000 193
90249 MIB48WPK 175 90412 USBBRP 62 90614 RBDT-6C 154 90798 PTEZHD-42/1050-UG 193
90249 MIB48WPK 178 90434 EZCRMK24-48 166 90615 RBDTXHD-13C 155 90799 PTEZHD-48/1200-UG 193
90250 MIB54WPK 175 90537 CBCS18 130 90616 PTEZHD-42/1050 193 90800 PTEZHD-54/1350-UG 193
90251 MIB60WPK 178 90540 CBCS36 130 90619 PTEZHD-60/1500 193 90803 PTEZHD-MBK 193
90252 MIB72WPK 175 90541 CBCS42 130 90620 PTEZHD-72/1800 193 90804 PTEZHD-PBK 193
90252 MIB72WPK 178 90542 CBCS48 130 90621 PTEZHD-84/2100 193 90805 PTEZHD-DCK 193
90253 MIB24CPK 178 90543 CBCS54 130 90622 MXPP-1242 62 90806 PTEZHD-WRBK 193
90254 MIB30CPK 178 90544 CBCS60 130 90623 MXPP-1248 62 90807 PTEZHD-JBBK 193
90255 MIB36CPK 178 90554 CBCS72 130 90624 MXPP-1254 62 90935 RBQB1-16/400 145
90256 MIB42CPK 178 90555 CBCS84 130 90625 MXPP-1260 62 90936 RBQB1-18/450 145
90257 MIB48CPK 178 90581 MXP-1242 59 90626 MXPP-1272 62 90937 RBQB1-22/550 145
90261 EZCRMK54-60 166 90585 MXP-1272 59 90631 CRDF18 130 90941 RBQB1-34/850 145
90262 EZCRMK72 166 90586 MXP-1284 59 90632 CRDF24 130 90942 RBQB1-36/900 145
90265 PTEZ-18 193 90587 MXP-1296 59 90633 CRDF30 130 90943 RBQB1-40/1000 145
90266 PTEZ-24 193 90588 MXP-12120 59 90634 CRDF36 130 90944 RBQB1-42/1050 145
90267 PTEZ-30 193 90589 MXPP-642 62 90635 CRDF42 130 90945 RBQB1-46/1150 145
90283 SKPU-6x1/2x25 208 90593 MXPP-672 62 90639 CRDF72 130 90949 RBQB1-58/1450 145
90284 SKPU-6x3/4x25 208 90594 MXPP-684 62 90640 CRDF84 130 90950 RBQB1-60/1500 145
90285 SKPU-8x1/2x25 208 90595 MXPP-696 62 90641 CBC3R 130 90951 RBQB1-64/1600 145
90286 SKPU-8x3/4x25 208 90596 MXPP-6120 62 90642 MXP-6108 59 90952 RBQB1-70/1750 145
90351 PTEZMB 193 90598 MXPPE 62 90643 MXP-12108 59 90953 RBQB1-72/1800 145
90352 PTEZPB 193 90599 XDSTMPK 62 90644 MXPP-6108 62 90954 QB1PCK 145
90353 PTEZDC 193 90600 XDSTPAK 62 90645 MXPP-12108 62 A1636 CLFR1360/54.4-12 216
90393 MXP-642 59 90601 XDSTS-W 62 90646 RBP1R-S 190
Index by Ordering Number
ORDERING ITEM ORDERING ITEM ORDERING ITEM ORDERING ITEM
NUMBER CODE PAGE NUMBER CODE PAGE NUMBER CODE PAGE NUMBER CODE PAGE
900924 04200 213 CART2-120/3000 77912 117 CDWB36 75886 123 CLMN1500/60-15S 62059 215
900936 04143 213 CART2-60/1500 77908 109 CDWB42 75887 123 CLMN1800/72-15 61302 215
900948 04144 213 CART2-60/1500 77908 113 CDWB48 75888 123 CLMN1800/72-15S 62060 215
900960 04145 213 CART2-60/1500 77908 117 CDWB54 75889 123 CLMN2100/84-15 61303 215
900972 04146 213 CART2-72/1800 77909 109 CDWB60 75890 123 CLMN2100/84-15S 62061 215
900984 04147 213 CART2-72/1800 77909 113 CDWB72 75891 123 CLMN450/18-15 61294 215
10FRD6.5/21 71014 214 CART2-72/1800 77909 117 CDWB84 76942 123 CLMN450/18-15S 62052 215
10FRP6.5/21 71020 214 CART2-84/2100 77910 109 CDWB96 79062 123 CLMN6.5/21-15 62216 214
10ND6.5/21 71002 214 CART2-84/2100 77910 113 CEBC1 30021 213 CLMN600/24-15 61295 215
10NP6.5/21 71010 214 CART2-84/2100 77910 117 CEBC2 30022 213 CLMN600/24-15S 62053 215
12FRD6.5/21 71016 214 CART2-96/2400 77911 109 CFG-212 78838 20 CLMN750/30-15 61296 215
12FRDC6.5/21 71159 214 CART2-96/2400 77911 113 CFG-218 78839 20 CLMN750/30-15S 62054 215
12FRP6.5/21 71022 214 CART2-96/2400 77911 117 CFG-224 78840 20 CLMN900/36-15 61297 215
12ND6.5/21 71004 214 CBC18 76668 130 CFG-230 78841 20 CLMN900/36-15S 62055 215
12NDC6.5/21 71155 214 CBC24 76669 130 CFG-236 78842 20 CLN1060/42.4-12 71116 216
12NP6.5/21 71012 214 CBC30 76670 130 CFG-242 78843 20 CLN1060/42.4-12S 79388 216
15FRD6.5/21 71018 214 CBC36 76671 130 CFG-248 78844 20 CLN1200/48-12 71039 216
15FRP6.5/21 71015 214 CBC3R 90641 130 CFG-254 78845 20 CLN1200/48-12S 79389 216
15ND6.5/21 71006 214 CBC42 76672 130 CFG-260 78846 20 CLN1360/54.4-12 71126 216
15NP6.5/21 71017 214 CBC48 76673 130 CFG-818 78924 20 CLN1360/54.4-12S 79390 216
20FRD6.5/21 71019 214 CBC54 76674 130 CFG-824 78925 20 CLN1520/60.8-12 71127 216
20FRP6.5/21 72129 214 CBC60 76675 130 CFG-830 78926 20 CLN1520/60.8-12S 79392 216
20ND6.5/21 71008 214 CBC72 90762 130 CFG-836 78927 20 CLN1800/72-12 71042 216
20NP6.5/21 71021 214 CBC84 90763 130 CFG-842 78928 20 CLN1800/72-12S 79395 216
25ND6.5/21 71152 214 CBCS18 90537 130 CFG-848 78929 20 CLN2100/84-12 71044 216
25NP6.5/21 71163 214 CBCS24 90538 130 CFG-854 78930 20 CLN2100/84-12S 79398 216
7.5NLD3.3/11 71077 214 CBCS30 90539 130 CFG-860 78931 20 CLN460/18.4-12 71111 216
7.5WLD3.3/11 71076 214 CBCS36 90540 130 CLFR1060/42.4-12 71123 216 CLN460/18.4-12S 79383 216
900CBK 04149 213 CBCS42 90541 130 CLFR1060/42.4-12S 79411 216 CLN600/24-12 71112 216
ABU 76788 121 CBCS48 90542 130 CLFR1200/48-12 71005 216 CLN600/24-12S 79384 216
ABU 76788 122 CBCS54 90543 130 CLFR1200/48-12S 79412 216 CLN760/30.4-12 71113 216
AWTA 75907 45 CBCS60 90544 130 CLFR1360/54.4-12 A1636 216 CLN760/30.4-12S 79385 216
AWTA 75907 53 CBCS72 90554 130 CLFR1360/54.4-12S 79413 216 CLN900/36-12 71115 216
AWTA 75907 58 CBCS84 90555 130 CLFR1520/60.8-12 71009 216 CLN900/36-12S 79387 216
AWTB 75905 45 CBV-72 74389 156 CLFR1520/60.8-12S 79415 216 CLSFG-212 77144 29
AWTB 75905 53 CBV-84 74390 156 CLFR1800/72-12 71079 216 CLSFG-218 77145 29
AWTB 75905 58 CBV-96 74391 156 CLFR1800/72-12S 79418 216 CLSFG-224 77146 29
AWTHK 75909 45 CBV-L 73134 156 CLFR2100/84-12 71082 216 CLSFG-230 77147 29
AWTHK 75909 53 CBV-M 73133 156 CLFR2100/84-12S 79421 216 CLSFG-236 77148 29
AWTHK 75909 58 CBV-S 73132 156 CLFR460/18.4-12 71118 216 CLSFG-242 77149 29
AWTMB 75906 45 CBV-XS 73131 156 CLFR460/18.4-12S 79406 216 CLSFG-248 77150 29
AWTMB 75906 53 CCKHDL 79225 77 CLFR600/24-12 71119 216 CLSFG-254 77151 29
AWTMB 75906 58 CCKHDL 79225 109 CLFR600/24-12S 79407 216 CLSFG-260 77152 29
AWTNCB 76069 45 CCKHDL 79225 113 CLFR760/30.4-12 71120 216 CLSFG-818 77153 29
AWTNCB 76069 53 CCKHDL 79225 140 CLFR760/30.4-12S 79408 216 CLSFG-824 77154 29
AWTNCB 76069 58 CCKHDR 79229 77 CLFR900/36-12 71122 216 CLSFG-830 77155 29
AWTPBA 90000 45 CCKHDR 79229 109 CLFR900/36-12S 79410 216 CLSFG-836 77156 29
AWTPBA 90000 53 CCKHDR 79229 113 CLMFR1050/42-15 61312 215 CLSFG-842 77157 29
AWTPBA 90000 58 CCKHDR 79229 140 CLMFR1050/42-15S 62067 215 CLSFG-848 77158 29
CART-24/600 77900 109 CCKHDTS 79233 77 CLMFR1200/48-15 61313 215 CLSFG-854 77159 29
CART-24/600 77900 113 CCKHDTS 79233 109 CLMFR1200/48-15S 62068 215 CLSFG-860 77160 29
CART-24/600 77900 117 CCKHDTS 79233 113 CLMFR1350/54-15 61314 215 CPB 76692 130
CART-30/750 77901 109 CCKHDTS 79233 140 CLMFR1350/54-15S 62069 215 CRB-HT10 76593 15
CART-30/750 77901 113 CCKL 79224 77 CLMFR1500/60-15 61315 215 CRB-HT10 76593 21
CART-30/750 77901 117 CCKL 79224 89 CLMFR1500/60-15S 62070 215 CRB-HT10 76593 35
CART-36/900 77902 109 CCKL 79224 92 CLMFR1800/72-15 61316 215 CRB-HT16 76594 15
CART-36/900 77902 113 CCKL 79224 140 CLMFR1800/72-15S 62071 215 CRB-HT16 76594 21
CART-36/900 77902 117 CCKR 79228 77 CLMFR2100/84-15 61317 215 CRB-HT16 76594 35
CART-42/1050 77903 109 CCKR 79228 89 CLMFR2100/84-15S 62072 215 CRB-HT22 76595 15
CART-42/1050 77903 113 CCKR 79228 92 CLMFR450/18-15 61308 215 CRB-HT22 76595 21
CART-42/1050 77903 117 CCKR 79228 140 CLMFR450/18-15S 62063 215 CRB-HT22 76595 35
CART-48/1200 77904 109 CCKTS 79232 77 CLMFR6.5/21-15 61319 214 CRB-HT28 76596 15
CART-48/1200 77904 113 CCKTS 79232 89 CLMFR600/24-15 61309 215 CRB-HT28 76596 21
CART-48/1200 77904 117 CCKTS 79232 92 CLMFR600/24-15S 62064 215 CRB-HT28 76596 35
CART-54/1350 77905 109 CCKTS 79232 140 CLMFR750/30-15 61310 215 CRB-HT34 76597 15
CART-54/1350 77905 113 CCMK 78919 77 CLMFR750/30-15S 62065 215 CRB-HT34 76597 21
CART-54/1350 77905 117 CCMK 78919 89 CLMFR900/36-15 61311 215 CRB-HT34 76597 35
CART-60/1500 77906 109 CCMK 78919 92 CLMFR900/36-15S 62066 215 CRB-HT40 76598 15
CART-60/1500 77906 113 CCMK 78919 140 CLMN1050/42-15 61298 215 CRB-HT40 76598 21
CART-60/1500 77906 117 CCMKHD 78920 77 CLMN1050/42-15S 62056 215 CRB-HT40 76598 35
CART-72/1800 77907 109 CCMKHD 78920 109 CLMN1200/48-15 61299 215 CRB-HT46 76599 15
CART-72/1800 77907 113 CCMKHD 78920 113 CLMN1200/48-15S 62057 215 CRB-HT46 76599 21
CART-72/1800 77907 117 CCMKHD 78920 140 CLMN1350/54-15 61300 215 CRB-HT46 76599 35
CART2-120/3000 77912 109 CDWB24 75884 123 CLMN1350/54-15S 62058 215 CRB-HT52 76600 15
CART2-120/3000 77912 113 CDWB30 75885 123 CLMN1500/60-15 61301 215 CRB-HT52 76600 21

CRB-HT52 76600 35 CRB-W28 78474 35 CST1HD-B 77874 117 DRXL-48-420 76820 180
CRB-HT58 76601 15 CRB-W34 78475 15 CST1HD-G 77875 117 DRXL-48-435 76836 180
CRB-HT58 76601 21 CRB-W34 78475 21 CST1HD-S 77873 117 DRXL-48-520 76828 180
CRB-HT58 76601 35 CRB-W34 78475 35 CST1HD-W 77872 117 DRXL-48-535 76844 180
CRB-HT64 76602 15 CRB-W40 78476 15 CSTBK 77037 117 DRXL-54-420 76821 180
CRB-HT64 76602 21 CRB-W40 78476 21 CSTHDMK 77871 117 DRXL-54-435 76837 180
CRB-HT64 76602 35 CRB-W40 78476 35 CSTHDPM 77869 117 DRXL-54-520 76829 180
CRB-HT70 76603 15 CRB-W46 78477 15 CTS-B 77744 117 DRXL-54-535 76845 180
CRB-HT70 76603 21 CRB-W46 78477 21 CTS-B-S/S 78387 32 DRXL-60-420 76822 180
CRB-HT70 76603 35 CRB-W46 78477 35 CTS-G 77745 117 DRXL-60-435 76838 180
CRB-LS10 77088 26 CRB-W52 78478 15 CTS-S 77743 81 DRXL-60-520 76830 180
CRB-LS10 77088 30 CRB-W52 78478 21 CTS-S 77743 117 DRXL-60-535 76846 180
CRB-LS10HT 77551 26 CRB-W52 78478 35 CTS-W 77742 117 DRXL-72-420 76823 180
CRB-LS10HT 77551 30 CRB-W58 78479 15 DRXD-42-520 76912 186 DRXL-72-435 76839 180
CRB-LS10W 77097 26 CRB-W58 78479 21 DRXD-42-535 76919 186 DRXL-72-520 76831 180
CRB-LS10W 77097 30 CRB-W58 78479 35 DRXD-48-520 76913 186 DRXL-72-535 76847 180
CRB-LS16 77089 26 CRB10 75628 15 DRXD-48-535 76920 186 DRXM-24-420 76848 182
CRB-LS16HT 77552 26 CRB10 75628 35 DRXD-54-535 76921 186 DRXM-24-520 76856 182
CRB-LS16W 77098 26 CRB16 75629 15 DRXD-60-535 76922 186 DRXM-30-420 76849 182
CRB-LS22W 77099 30 CRB22 75630 143 DRXH-24-420 76880 184 DRXM-36-535 76874 182
CRB-LS28 77091 26 CRB28 75631 15 DRXH-24-435 76896 184 DRXM-42-420 76851 182
CRB-LS28HT 77554 26 CRB28 75631 35 DRXH-24-535 76904 184 DRXM-42-520 76859 182
CRB-LS46HT 77557 26 CRB58 75636 15 DRXH-54-435 76901 184 DWP-72 75883 126
CRB-LS46HT 77557 30 CRB58 75636 21 DRXH-54-520 76893 184 DWP-84 76815 126
CRB-LS46W 77103 26 CRB58 75636 35 DRXH-54-535 76909 184 DWP-96 79060 126
CRB-LS46W 77103 30 CRB58 75636 143 DRXH-60-420 76886 184 EBC-EB 30007 213
CRB-LS52 77095 26 CRB64 75775 15 DRXH-60-435 76902 184 EBC-H 30008 213
CRB-LS52 77095 30 CRB64 75775 21 DRXH-60-520 76894 184 EBC1 30011 213
CRB-LS52HT 77558 26 CRB64 75775 35 DRXH-60-535 76910 184 EBC1-B 30003 213
CRB-LS52HT 77558 30 CRB70 75773 15 DRXH-72-420 76887 184 EBC1-DR 30013 213
CRB-LS52W 77104 26 CRB70 75773 21 DRXH-72-435 76903 184 EBC2 30012 213
CRB-LS52W 77104 30 CRB70 75773 35 DRXH-72-520 76895 184 EBC2-B 30004 213
CRB-LS58 77096 26 CRB70 75773 143 DRXH-72-535 76911 184 EBC2-DR 30014 213
CRB-LS58 77096 30 CRB76 76940 15 DRXL-24-420 76816 180 ELT 74774 138
CRB-LS58HT 77559 26 CRB76 76940 21 DRXL-24-435 76832 180 ESBK-B 76411 18
CRB-LS58HT 77559 30 CRB76 76940 35 DRXL-24-520 76824 180 ESBK-PS 76410 18
CRB-LS58W 77105 26 CRB82 76941 15 DRXL-24-535 76840 180 ESBK-PS 76410 121
CRB-LS58W 77105 30 CRB82 76941 21 DRXL-30-420 76817 180 ESPBK 76408 18
CRB-W10 78471 15 CRB82 76941 35 DRXL-30-435 76833 180 ESPRK 76409 18
CRB-W10 78471 21 CRDF18 90631 130 DRXL-30-520 76825 180 ESPRK 76409 121
CRB-W10 78471 35 CRDF24 90632 130 DRXL-30-535 76841 180 ESPSBK 76407 18
CRB-W16 78472 15 CRDF30 90633 130 DRXL-36-420 76818 180 ESS-B 76413 18
CRB-W16 78472 21 CRDF36 90634 130 DRXL-36-435 76834 180 ESS-S 76412 18
CRB-W16 78472 35 CRDF42 90635 130 DRXL-36-520 76826 180 ESS-S 76412 121
CRB-W22 78473 15 CRDF48 90636 130 DRXL-36-535 76842 180 EST-B 76405 18
CRB-W22 78473 21 CRDF54 90637 130 DRXL-42-420 76819 180 EST-G-S/S 78810 23
CRB-W22 78473 35 CRDF60 90638 130 DRXL-42-435 76835 180 EST-P 76403 18
CRB-W28 78474 15 CRDF72 90639 130 DRXL-42-520 76827 180 EST-P-S/S 78808 23
CRB-W28 78474 21 CRDF84 90640 130 DRXL-42-535 76843 180 EST-S 76404 18
EST-W-S/S 78809 23 EZCSK-48 78982 163 EZP1-212 75610 11 EZP1T-236 78492 12
ESTAK-EST 76406 18 EZCSK-48 78982 166 EZP1-212W 78934 14 EZP1T-242 78493 12
ESTAK-EST 76406 121 EZCSK-48 78982 169 EZP1-218 75611 11 EZP1T-248 78494 12
ESTAK-EST-S/S 78849 23 EZCSK-48 78982 172 EZP1-218W 78935 14 EZP1T-254 78495 12
EZAI-24 79000 161 EZCSK-54 78983 163 EZP1-224 75612 11 EZP1T-260 78496 12
EZAI-24I 79091 164 EZCSK-54 78983 166 EZP1-224W 78936 14 EZP1T-272 78497 12
EZAI-24I 79091 173 EZCSK-54 78983 169 EZP1-230 75613 11 EZP1T-818 78498 12
EZAI-36I 79093 176 EZCSK-72 78985 172 EZP1-254W 78941 14 EZPTBT 77384 19
EZAI-42 79003 161 EZIB24-4L 78887 167 EZP1-260 75618 11 EZPTBTHD 77385 19
EZAI-42I 79094 164 EZIB24-4M 78903 170 EZP1-260W 78942 14 EZPTCK 78508 19
EZAI-42I 79094 173 EZIB24-5L 78895 167 EZP1-272 75771 11 EZPTCKHD 78509 19
EZAI-42I 79094 176 EZIB24-5M 78911 170 EZP1-818 75779 11 EZPTMPK 78507 19
EZAI-48 79004 161 EZIB30-4L 78888 167 EZP1-824 75780 11 EZPTSK 78511 19
EZAI-48I 79095 164 EZIB30-4M 78904 170 EZP1-830 75781 11 EZPTSKHD 78512 19
EZAI-48I 79095 173 EZIB30-5L 78896 167 EZP1-836 75782 11 EZPTSR 78510 19
EZAI-48I 79095 176 EZIB30-5M 78912 170 EZP1-842 75783 11 EZRMK 78952 163
EZAI-54 79005 161 EZIB36-4L 78889 167 EZP1-848 75784 11 EZS2-18 75643 74
EZAI-54I 79096 164 EZIB36-4M 78905 170 EZP1-854 75785 11 EZS2-24 75644 74
EZAI-54I 79096 173 EZIB36-5L 78897 167 EZP1-860 75786 11 EZS2-30 75645 74
EZAI-54I 79096 176 EZIB36-5M 78913 170 EZP1-872 75774 11 EZS2-36 75646 74
EZAI-60 79006 161 EZIB42-4L 78890 167 EZP1BP 75642 18 EZS2-42 75647 74
EZAI-60I 79097 164 EZIB42-4M 78906 170 EZP1BP 75642 19 EZS2-48 75648 74
EZAI-60I 79097 173 EZIB42-5L 78898 167 EZP1BP 75642 143 EZS2-54 75649 74
EZAI-60I 79097 176 EZIB42-5M 78914 170 EZP1BP 75642 147 EZS2-60 75650 74
EZAI-72 79007 161 EZIB48-4L 78891 167 EZP1BP 75642 148 EZS2-72 75651 74
EZAI-72I 79098 164 EZIB48-4M 78907 170 EZP1MPK 75637 18 EZS2MBK 75666 77
EZAI-72I 79098 173 EZIB48-5L 78899 167 EZP1MPK-S/S 78923 23 EZS2MBK 75666 89
EZAI-72I 79098 176 EZIB48-5M 78915 170 EZP1OTK1 76418 18 EZS2MBK 75666 92
EZBMK-24 78944 169 EZIB54-4L 78892 167 EZP1OTK2 76419 18 EZS2MBK 75666 109
EZBMK-24 78944 172 EZIB54-4M 78908 170 EZP1P12 75619 18 EZS2MBK 75666 113
EZBMK-30 78945 169 EZIB54-5L 78900 167 EZP1P12 75619 19 EZS2MBK 75666 130
EZBMK-30 78945 172 EZIB54-5M 78916 170 EZP1P12-S/S 78812 23 EZS2MBK 75666 140
EZBMK-36 78946 169 EZIB60-4L 78893 167 EZP1P18 75620 18 EZS2P18 75652 77
EZBMK-36 78946 172 EZIB60-4M 78909 170 EZP1P18 75620 19 EZS2P18 75652 140
EZBMK-42 78947 169 EZIB60-5L 78901 167 EZP1P18-S/S 78813 23 EZS2P24 75653 77
EZBMK-48 78948 172 EZIB72-4M 78910 170 EZP1P24-S/S 78814 23 EZS2P30 75654 140
EZBMK-60 78950 169 EZIRMK 79318 166 EZP1P30-S/S 78815 23 EZS2P42 75656 77
EZBMK-60 78950 172 EZP-LS212 77127 24 EZP1P36 75623 18 EZS2P42 75656 140
EZBMK-72 78951 169 EZP-LS212HT 77746 25 EZP1P36 75623 19 EZS2P48 75657 77
EZBMK-72 78951 172 EZP-LS218 77128 24 EZP1P36-S/S 78816 23 EZS2P48 75657 140
EZBS-L4 78953 166 EZP-LS218HT 77747 25 EZP1P42 75624 18 EZS2P54 75658 77
EZBS-L4 78953 169 EZP-LS224 77129 24 EZP1P42 75624 19 EZS2P54 75658 140
EZBS-L5 78954 166 EZP-LS224HT 77748 25 EZP1P42-S/S 78817 23 EZS2P60 75659 77
EZBS-L5 78954 169 EZP-LS230 77130 24 EZP1P48 75625 18 EZS2P60 75659 140
EZCRMK24-48 90434 166 EZP-LS230HT 77749 25 EZP1P48 75625 19 EZS2P72 75660 77
EZCRMK54-60 90261 166 EZP-LS236 77131 24 EZP1P48-S/S 78818 23 EZS2P72 75660 140
EZCRMK72 90262 166 EZP-LS236HT 77750 25 EZP1P54 75626 18 EZSB24-4C 78855 161
EZCSK-24 78978 163 EZP-LS242 77132 24 EZP1P54 75626 19 EZSB24-4I 78871 164
EZCSK-24 78978 166 EZP-LS242HT 77751 25 EZP1P54-S/S 78819 23 EZSB24-5C 78863 161
EZCSK-24 78978 172 EZP-LS248HT 77752 25 EZP1P60 75627 19 EZSB30-4C 78856 161
EZCSK-30 78979 163 EZP-LS254 77134 24 EZP1P60-S/S 78820 23 EZSB30-4I 78872 164
EZCSK-30 78979 166 EZP-LS254HT 77753 25 EZP1P72 75772 18 EZSB30-5C 78864 161
EZCSK-30 78979 172 EZP-LS260HT 77754 25 EZP1P72-S/S 78821 23 EZSB36-4C 78857 161
EZCSK-36 78980 163 EZP-LS818 77136 24 EZP1PL 75641 18 EZSB36-4I 78873 164
EZCSK-36 78980 166 EZP-LS824 77137 24 EZP1PL 75641 19 EZSB36-5C 78865 161
EZCSK-36 78980 169 EZP-LS830 77138 24 EZP1PL 75641 139 EZSB36-5I 78881 164
EZCSK-36 78980 172 EZP-LS836 77139 24 EZP1PL-S/S 78848 23 EZSB42-4C 78858 161
EZCSK-42 78981 163 EZP-LS842 77140 24 EZP1T-212 78488 12 EZSB42-4I 78874 164
EZCSK-42 78981 166 EZP-LS848 77141 24 EZP1T-218 78489 12 EZSB42-5C 78866 161
EZCSK-42 78981 169 EZP-LS854 77142 24 EZP1T-224 78490 12 EZSB42-5I 78882 164
EZCSK-42 78981 172 EZP-LS860 77143 24 EZP1T-230 78491 12 EZSB48-4C 78859 161

EZSB48-4I 78875 164 FLSC-I 71052 210 HDRR24 79019 137 HTS30 76087 75
EZSB48-5C 78867 161 FLSC-I-BULK 71054 210 HDRR30 79020 137 HTS36 76088 75
EZSB48-5I 78883 164 FLSC-ISS 75778 210 HDRR36 79021 137 HTS42 76089 75
EZSB54-4C 78860 161 FLSCM-I 71055 210 HDRR42 79022 137 HTS48 76090 75
EZSB54-4I 78876 164 FLSCM-I-BULK 71100 210 HDRR48 79023 137 HTS54 76091 75
EZSB54-5C 78868 161 FLTW-L 77409 212 HDRR54 79024 137 HTS60 76092 75
EZSB54-5I 78884 164 FLTW-M 77408 212 HDRR60 79025 137 HTS72 76093 75
EZSB60-4C 78861 161 FLTW-XL 77410 212 HDRRS72 79026 137 HTSCK 76094 75
EZSB60-4I 78877 164 FLVRL-XL 77406 212 HDRRS84 79027 137 HTSCK 76094 77
EZSB60-5C 78869 161 FMS-18 90545 93 HDRS72 79017 137 HTTS 74141 138
EZSB60-5I 78885 164 FMS-18V 79646 93 HDRS84 79018 137 HTTS-HT 79068 73
EZSB72-4C 78862 161 FMS-24 90546 93 HDTS 74502 18 HTV18S 74828 73
EZSB72-4I 78878 164 FMS-24V 79647 93 HDTS 74502 121 HTV18SS 74821 73
EZSB72-5C 78870 161 FMS-30 90547 93 HDTS 74502 139 HTV24S 74829 73
EZSB72-5I 78886 164 FMS-30V 79648 93 HDTS-S/S 75586 122 HTV24SS 74822 73
EZWPK-24 78970 163 FMS-36 90548 93 HFC2 75901 72 HTV30S 74830 73
EZWPK-24 78970 166 FMS-36V 79649 93 HFC2 75901 139 HTV30SS 74823 73
EZWPK-24 78970 169 FMS-42 90549 93 HOBK 76399 65 HTV36M 74838 73
EZWPK-24 78970 172 FMS-42V 79650 93 HOBK 76399 72 HTV36S 74831 73
EZWPK-30 78971 163 FMS-48 90550 93 HP-18 78990 139 HTV36SS 74824 73
EZWPK-30 78971 166 FMS-48V 79651 93 HP-24 78991 139 HTV42M 74839 73
EZWPK-30 78971 169 FMS-54 90551 93 HP-30 78992 139 HTV42S 74832 73
EZWPK-30 78971 172 FMS-54V 79652 93 HP-36 78993 139 HTV42SS 74825 73
EZWPK-36 78972 163 FMS-60 90552 93 HP-42 78994 139 HTV48M 74840 73
EZWPK-36 78972 166 FMS-60V 79653 93 HP-48 78995 139 HTV48S 74833 73
EZWPK-36 78972 169 FMS-72 90553 93 HP-54 78996 139 HTV48SS 74826 73
EZWPK-36 78972 172 FMS-72V 79654 93 HP-60 78997 139 HV-18M 76191 68
EZWPK-42 78973 163 FMSC 79699 95 HP-72 78998 139 HV-18S 76190 68
EZWPK-42 78973 166 H-MK1 78987 139 HPS8 73050 139 HV-18SS 76101 68
EZWPK-42 78973 169 H-MK2 78801 139 HSA8L 73063 68 HV-24M 76193 68
EZWPK-42 78973 172 H2P18 79358 65 HSA8L 73063 70 HV-24S 76192 68
EZWPK-48 78974 163 H2P24 79359 65 HSA8L 73063 72 HV-24SS 76102 68
EZWPK-48 78974 166 H2P30 79360 65 HSA8L 73063 139 HV-30M 76195 68
EZWPK-48 78974 169 H2P36 79361 65 HSA8L 73063 139 HV-30S 76194 68
EZWPK-48 78974 172 H2P42 79362 65 HSA8LL 73064 68 HV-30SS 76103 68
EZWPK-54 78975 163 H2P48 79363 65 HSA8LL 73064 70 HV-36L 76198 68
EZWPK-54 78975 166 H2P54 79364 65 HSA8LL 73064 72 HV-36M 76197 68
EZWPK-54 78975 169 H2P60 79365 65 HSA8LL 73064 139 HV-36S 76196 68
EZWPK-54 78975 172 H2P72 79366 65 HSA8LL 73064 139 HV-36SS 76104 68
EZWPK-60 78976 163 H2RC 79374 65 HSA8M 73049 68 HV-42L 76252 68
EZWPK-60 78976 166 H2SA6L 79372 63 HSA8M 73049 70 HV-42LL 76253 68
EZWPK-60 78976 169 H2SA6L 79372 65 HSA8M 73049 72 HV-42M 76251 68
EZWPK-60 78976 172 H2SA6LL 79373 63 HSA8M 73049 73 HV-42S 76199 68
EZWPK-72 78977 163 H2SA6LL 79373 65 HSA8M 73049 139 HV-42SS 76105 68
EZWPK-72 78977 166 H2SA6M 79371 63 HSA8M 73049 139 HV-48L 76256 68
EZWPK-72 78977 169 H2SA6M 79371 65 HSA8S 73048 68 HV-48LL 76257 68
EZWPK-72 78977 172 H2SA6S 79370 63 HSA8S 73048 70 HV-48M 76255 68
FFCK 75661 77 H2SA6S 79370 65 HSA8S 73048 73 HV-48S 76254 68
FL-ACT 70186 217 H2SA6SS 79369 63 HSA8S 73048 139 HV-48SS 76106 68
FL-ADH-0.8 75017 217 H2SA6SS 79369 65 HSA8S 73048 139 HV-54L 76259 68
FL-CP-I 71141 210 H78P18 76110 72 HSA8S 73048 72 HV-54LL 76260 68
FL-CP-I 71141 210 H78P24 76111 72 HSA8SS 73047 68 HV-54M 76258 68
FL-CP-ISS 71164 210 H78P30 76112 72 HSA8SS 73047 70 HV-54S 76107 68
FL-L 76982 212 H78P36 76113 72 HSA8SS 73047 72 HV-60L 76262 68
FL-M 76981 212 H78P42 76114 72 HSA8SS 73047 73 HV-60LL 76263 68
FL-PC-I 71057 210 H78P48 76115 72 HSA8SS 73047 139 HV-60M 76261 68
FL-PC-ISS 71168 210 H78P54 76116 72 HSA8SS 73047 139 HV-60S 76108 68
FL-PKIT-ML 77250 212 H78P60 76117 72 HSA8SSS 75565 139 HV-72L 76265 68
FL-PKIT-XL 77251 212 H78P72 76118 72 HSA8SSS 75565 139 HV-72LL 76266 68
FL-PR-0.75 70189 217 HAR-K 78786 18 HSSCS 74772 72 HV-72M 76264 68
FL-RBI 71060 210 HAR-K 78786 139 HSSCS 74772 139 HV-72S 76109 68
FL-RBI 71060 210 HARK-S/S 77364 122 HSSTS 74771 72 HV2-18M 79325 63
FL-RPI 71058 210 HBTK 74776 139 HSSTS 74771 139 HV2-18S 79324 63
FL-RPI 71058 210 HDARK 74550 139 HTF212 76658 13 HV2-18SS 79323 63
FL-XL 77386 212 HDARK-S/S 77331 122 HTF218 76659 13 HV2-24M 79328 63
FLCK 77729 212 HDR24 79010 137 HTF224 76660 13 HV2-24S 79327 63
FLCP 76479 212 HDR30 79011 137 HTF230 76661 13 HV2-24SS 79326 63
FLEL-L 76473 212 HDR36 79012 137 HTF236 76662 13 HV2-30M 79331 63
FLEL-M 76472 212 HDR42 79013 137 HTF242 76663 13 HV2-30S 79330 63
FLELK-XL 76986 212 HDR48 79014 137 HTF248 76664 13 HV2-30SS 79329 63
FLELP 76474 212 HDR54 79015 137 HTF254 76665 13 HV2-36L 79335 63
FLM-PC 71140 210 HDR60 79016 137 HTF260 76666 13 HV2-36M 79334 63
FLRLB-L 77406 212 HDRBK 79009 137 HTF272 76667 13 HV2-36S 79333 63
FLRLB-M 77405 212 HDRBK-HD 79072 137 HTS18 76085 75 HV2-36SS 79332 63
FLRP 76478 212 HDRGEK 79236 137 HTS24 76086 75 HV2-42L 79339 63
HV2-42LL 79340 63 HXF2-30S 76293 66 IBS-L5 76930 180 LSP12 77070 28
HV2-42M 79338 63 HXF2-30SS 76140 66 IBS-M4 76931 172 LSP12-S/S 77079 32
HV2-42S 79337 63 HXF2-36L 76297 66 IBS-M4 76931 182 LSP18 77071 28
HV2-42SS 79336 63 HXF2-36M 76296 66 IBS-M5 76932 172 LSP18-S/S 77080 32
HV2-48L 79344 63 HXF2-36S 76295 66 IBS-M5 76932 182 LSP24 77072 28
HV2-48LL 79345 63 HXF2-36SS 76141 66 ICT6 74535 74 LSP24-S/S 77081 32
HV2-48M 79343 63 HXF2-42L 76300 66 ICT6 74535 75 LSP30 77073 28
HV2-48S 79342 63 HXF2-42M 76299 66 ICT6 74535 77 LSP30-S/S 77082 32
HV2-48SS 79341 63 HXF2-42S 76298 66 ICT6 74535 86 LSP36 77074 28
HV2-54L 79348 63 HXF2-42SS 76142 66 ICT6 74535 87 LSP36-S/S 77083 32
HV2-54LL 79349 63 HXF2-48L 76303 66 ICT6 74535 89 LSP42 77075 28
HV2-54M 79347 63 HXF2-48M 76302 66 ICT6 74535 90 LSP42-S/S 77084 32
HV2-54S 79346 63 HXF2-48S 76301 66 ICT6 74535 92 LSP48 77076 28
HV2-60LL 79353 63 HXF2-54L 76306 66 ICT6 74535 95 LSP54 77077 28
HV2-60M 79351 63 HXF2-54M 76305 66 ICT6 74535 96 LSP54-S/S 77086 32
HV2-60S 79350 63 HXF2-54S 76304 66 ICT6 74535 98 LSP60 77078 28
HV2-72LL 79357 63 HXF2-60L 76308 66 ICT6 74535 103 LST-B-S/S 77124 32
HV2-72M 79355 63 HXF2-60M 76307 66 ICT6 74535 105 LST-P 77121 28
HV2-72S 79354 63 HXF2-60S 76145 66 ICT6 74535 106 LST-S 77123 28
HV2PT 79368 63 HXF2-72L 76310 66 ICT6 74535 109 LST-TAK 77120 28
HV2PT 79368 65 HXF2-72M 76309 66 ICT6 74535 110 LST-W 77122 28
HV2SSTS 79375 65 HXF2-72S 76146 66 ICT6 74535 113 LST-W-S/S 77125 32
HV2T-S/S 79367 63 HXF2-L 75982 66 ICT6 74535 114 LST-W-S/S-2 77126 32
HV2T-S/S 79367 65 HXF2-L 75982 72 ICT6 74535 117 LSTMPK 77366 28
HVP-18L 76268 70 HXF2-L 75982 139 ICT6 74535 140 LSTMPK-S/S 78933 32
HVP-18M 76267 70 HXF2-M 75981 66 ICT6-S/S 78700 105 LSTMPK2-S/S 78462 32
HVP-18S 76124 70 HXF2-M 75981 72 IDHINGE 79316 133 LSTPB-RK 77367 28
HVP-24L 76270 70 HXF2-M 75981 139 IDLATCH 79317 133 MAK 74918 206
HVP-24M 76269 70 HXF2-S 75980 66 IDSC-1212 79311 133 MAK2-S/S 90048 207
HVP-24S 76125 70 HXF2-S 75980 72 IDSC-1218 79312 133 MAK2 79381 206
HVP-30L 76272 70 HXF2-S 75980 139 IDSC-1824 79313 133 MAKHD 74919 206
HVP-30M 76271 70 HXF2-SS 75979 66 IDSC-2424 79314 133 MAKHD2-S/S 90049 207
HVP-30S 76126 70 HXF2-SS 75979 72 IDSEAL 79315 133 MAKHD2 79382 206
HVP-36L 76274 70 HXF2-SS 75979 139 IEA-42-60 76937 186 MAKSD 74920 206
HVP-36M 76273 70 HXF8L 74691 66 IEA-72-96 76938 186 MAKSD-S/S 90057 207
HVP-36S 76127 70 HXF8L 74691 139 IMK 76936 180 MAPEK 76024 131
HVP-42L 76276 70 HXF8L 74691 139 IMK 76936 182 MBADB 79527 129
HVP-42M 76275 70 HXF8M 74690 66 IMK 76936 184 MBC-18 79494 127
HVP-42S 76128 70 HXF8M 74690 139 INDR-1212 79303 133 MBC-18-575V 79914 127
HVP-48L 76278 70 HXF8M 74690 139 INDR-1212S 79307 133 MBC-24 79495 127
HVP-48LL 76279 70 HXF8S 74689 66 INDR-1218 79304 133 MBC-24-575V 79915 127
HVP-48M 76277 70 HXF8S 74689 139 INDR-1218S 79308 133 MBC-30 79496 127
HVP-48S 76129 70 HXF8SS 74307 66 INDR-1824 79305 133 MBC-30-575V 79916 127
HVP-54L 76281 70 HXF8SS 74307 139 INDR-1824S 79309 133 MBC-36 79497 127
HVP-54LL 76282 70 HXFC2 75902 72 INDR-2424 79306 133 MBC-36-575V 79917 127
HVP-54M 76280 70 HXFC2 75902 139 INDR-2424S 79310 133 MBC-42 79498 127
HVP-54S 76130 70 IB4 76926 166 ISABK 76935 186 MBC-42-575V 79918 127
HVP-60L 76284 70 IB4 76926 169 ISABK-LMH 77529 180 MBC-48 79499 127
HVP-60LL 76285 70 IB4 76926 172 ISABK-LMH 77529 182 MBC-48-575V 79919 127
HVP-60M 76283 70 IB4 76926 180 ISABK-LMH 77529 184 MBC-54 79500 127
HVP-60S 76131 70 IB4 76926 182 ISC 74534 140 MBC-54-575V 79920 127
HVP-72L 76287 70 IB4 76926 184 JNK-A 79891 18 MBC-60 79501 127
HVP-72LL 76288 70 IB4-1U 76965 188 JNK-B 79892 28 MBC-60-575V 79921 127
HVP-72M 76286 70 IB5 76927 166 JNK-C 79893 37 MBC-72 79502 127
HVP-72S 76132 70 IB5 76927 169 JNK-C 79893 45 MBC-72-575V 79922 127
HVPT 73631 70 IB5 76927 172 JNK-C 79893 65 MBC-84 79503 127
HVPT 73631 72 IB5 76927 180 JNK-C 79893 72 MBC-84-575V 79923 127
HVPT 73631 139 IB5 76927 182 JNK-C 79893 103 MBCB 79526 129
HVPT 73631 139 IB5 76927 184 JNK-C 79893 117 MBCBC 79525 129
HVT8-S/S 75419 68 IB5 76927 186 JNK-C 79893 121 MBCBL 79532 129
HVT8-S/S 75419 72 IB5-1U 76966 188 JNK-C 79893 126 MBCBM 79528 129
HVT8-S/S 75419 73 IBBK 76928 163 JNK-D 79894 53 MBCDBK 79536 127
HVT8-S/S 75419 139 IBBK 76928 166 JNK-D 79894 58 MBCDBK 79536 129
HVT8-S/S 75419 139 IBBK 76928 169 JNK-E 79895 117 MBCDBK 79536 131
HW-BC 74100 138 IBBK 76928 172 JNK-F 79896 121 MBCEC 79534 129
HW-IMPB 76939 188 IBBK 76928 180 LAGGING-TB 79080 217 MBCM-1 79529 129
HXF2-18M 76290 66 IBBK 76928 182 LAGGING-TB2 79099 217 MBCM-2 79530 129
HXF2-18S 76289 66 IBBK 76928 184 LS-BP 77114 28 MBCM-575-1 79924 129
HXF2-18SS 76138 66 IBBK 76928 186 LS-BP-S/S 77115 32 MBCM-575-2 79925 129
HXF2-24M 76292 66 IBS-D5 77530 186 LS-SPK 77365 28 MBCMK 79524 129
HXF2-24S 76291 66 IBS-H4 76933 184 LS-SS 77118 28 MBCMKK 79533 129
HXF2-24SS 76139 66 IBS-H5 76934 184 LS-SW 77117 28 MBCTA 79531 129
HXF2-30M 76294 66 IBS-L4 76929 180 LS-SW-S/S 78850 32 MBDS-18 79504 129

MBDS-24 79505 129 MFASK 75531 206 MHP-1842 78592 47 MHS-24 75910 96
MBDS-30 79506 129 MFASKHD-S/S 90050 207 MHP-1842P 78619 48 MHS-24-ESAC 77840 114
MBDS-36 79507 129 MFASKHD 79571 206 MHP-1848 78593 47 MHS-24-S/S 77601 101
MBDS-42 79508 129 MHCP-24P 78723 54 MHP-1848P 78620 48 MHS-24P 78736 99
MBDS-48 79509 129 MHCP-24S 75929 54 MHP-1854 78594 47 MHS-24R 76613 99
MBDS-54 79510 129 MHCP-2BC24 76638 58 MHP-1854P 78621 48 MHS-24R-S/S 77640 101
MBDS-60 79511 129 MHCP-2BC30 76639 58 MHP-1860 78595 47 MHS-24RMV 79625 97
MBDS-72 79512 129 MHCP-2BC36 76640 58 MHP-1860P 78622 48 MHS-24RU 79738 98
MBDS-84 79513 129 MHCP-2BC42 76641 58 MHP-1872 78596 47 MHS-24RUV 79749 98
MBRD-18 79514 127 MHCP-2BC48 76642 58 MHP-1872P 78623 48 MHS-24RV 76647 99
MBRD-18 79514 129 MHCP-2BC54 76643 58 MHP-1884 78597 47 MHS-24RV-S/S 77649 101
MBRD-24 79515 127 MHCP-2BC60 76644 58 MHP-1884P 78624 48 MHS-24V 76170 96
MBRD-24 79515 129 MHCP-2BC72 76645 58 MHP-1896 78598 47 MHS-24V-ESAC 77853 114
MBRD-30 79516 127 MHCP-2BC84 76812 58 MHP-1896P 78625 48 MHS-24V-MST 79443 97
MBRD-30 79516 129 MHCP-2BC96 78986 58 MHP-2442 78669 47 MHS-24V-S/S 77610 101
MBRD-36 79517 127 MHCP-30P 78724 54 MHP-2442P 78676 48 MHS-30 75911 96
MBRD-36 79517 129 MHCP-30S 75930 54 MHP-2448 78670 47 MHS-30-ESAC 77841 114
MBRD-42 79518 127 MHCP-36P 78725 54 MHP-2448P 78677 48 MHS-30-S/S 77602 101
MBRD-42 79518 129 MHCP-36S 75931 54 MHP-2454 78671 47 MHS-30P 78737 99
MBRD-48 79519 127 MHCP-42P 78726 54 MHP-2454P 78678 48 MHS-30R 76614 99
MBRD-48 79519 129 MHCP-42S 75932 54 MHP-2460 78672 47 MHS-30R-S/S 77641 101
MBRD-54 79520 127 MHCP-48P 78727 54 MHP-2460P 78679 48 MHS-30RMV 79626 97
MBRD-54 79520 129 MHCP-48S 75933 54 MHP-2472 78673 47 MHS-30RU 79739 98
MBRD-60 79521 127 MHCP-54P 78728 54 MHP-2472P 78680 48 MHS-30RUV 79750 98
MBRD-60 79521 129 MHCP-54S 75934 54 MHP-2484 78674 47 MHS-30RV 76648 99
MBRD-72 79522 127 MHCP-60P 78729 54 MHP-2484P 78681 48 MHS-30RV-S/S 77650 101
MBRD-72 79522 129 MHCP-60S 75935 54 MHP-2496 78675 47 MHS-30V 76171 96
MBRD-84 79523 127 MHCP-72P 78730 54 MHP-2496P 78682 48 MHS-30V-ESAC 77854 114
MBRD-84 79523 129 MHCP-72S 75936 54 MHP-624 77703 47 MHS-30V-MST 79444 97
MCB 74925 206 MHCP-84P 78731 54 MHP-624P 78599 48 MHS-30V-S/S 77611 101
MCB 74925 207 MHCP-84S 76800 54 MHP-630 77704 47 MHS-36 75912 96
MCBK 76025 206 MHCP-96P 78959 54 MHP-630P 78600 48 MHS-36-ESAC 77842 114
MCBK 76025 207 MHCP-96S 78955 54 MHP-636 77705 47 MHS-36-S/S 77603 101
MCBKHD 76026 206 MHCP-BCK24 75953 56 MHP-636P 78601 48 MHS-36P 78738 99
MCBKHD 76026 207 MHCP-BCK30 75954 56 MHP-642 77706 47 MHS-36R 76615 99
MCBKSD 76027 206 MHCP-BCK36 75955 56 MHP-642P 78602 48 MHS-36R-S/S 77642 101
MCBKSD 76027 207 MHCP-BCK42 75956 56 MHP-648 77707 47 MHS-36RMV 79627 97
MCBSD 74926 206 MHCP-BCK48 75957 56 MHP-648P 78603 48 MHS-36RU 79740 98
MCBSD 74926 207 MHCP-BCK54 75958 56 MHP-654 77708 47 MHS-36RUV 79751 98
MCRK 74923 206 MHCP-BCK60 75959 56 MHP-654P 78604 48 MHS-36RV 76649 99
MCRK 74923 207 MHCP-BCK72 75960 56 MHP-660 77709 47 MHS-36RV-S/S 77651 101
MCRKSD 74924 206 MHCP-BCK84 76810 56 MHP-660P 78605 48 MHS-36V 76172 96
MCRKSD 74924 207 MHCP-BCK96 78957 56 MHP-672 77710 47 MHS-36V-ESAC 77855 114
MCS 74930 206 MHCP-BPA24 75945 56 MHP-672P 78606 48 MHS-36V-MST 79445 97
MCS 74930 207 MHCP-BPA30 75946 56 MHP-684 77711 47 MHS-36V-S/S 77612 101
MCSHD 74931 206 MHCP-BPA36 75947 56 MHP-684P 78607 48 MHS-42 75913 96
MCSHD 74931 207 MHCP-BPA42 75948 56 MHP-696 77712 47 MHS-42-ESAC 77843 114
MCSK 74927 206 MHCP-BPA48 75949 56 MHP-696P 78608 48 MHS-42-S/S 77604 101
MCSK 74927 207 MHCP-BPA54 75950 56 MHP-CP24 75961 58 MHS-42P 78739 99
MCSKHD 74928 206 MHCP-BPA60 75951 56 MHP-CP30 75962 58 MHS-42R 76616 99
MCSKHD 74928 207 MHCP-BPA72 75952 56 MHP-CP36 75963 58 MHS-42R-S/S 77643 101
MCSKSD 74929 206 MHCP-BPA84 76809 56 MHP-CP42 75964 58 MHS-42RMV 79628 97
MCSKSD 74929 207 MHCP-BPA96 78956 56 MHP-CP48 75965 58 MHS-42RU 79741 98
MCSSD 74932 206 MHCP-BS 76394 58 MHP-CP54 75966 58 MHS-42RUV 79752 98
MCSSD 74932 207 MHCP-CH 76393 58 MHP-CP60 75967 58 MHS-42RV 76650 99
MDWS-24 75868 123 MHP-1230 77713 47 MHP-CP72 75968 58 MHS-42RV-S/S 77652 101
MDWS-24P 78745 123 MHP-1230P 78609 48 MHP-CP84 76811 58 MHS-42V 76173 96
MDWS-30 75869 123 MHP-1236 77714 47 MHP-CP96 78958 58 MHS-42V-ESAC 77856 114
MDWS-30P 78746 123 MHP-1236P 78610 48 MHP-EP 76392 45 MHS-42V-MST 79446 97
MDWS-36 75870 123 MHP-1242 77715 47 MHP-EP 76392 53 MHS-42V-S/S 77613 101
MDWS-36P 78747 123 MHP-1242P 78611 48 MHP-EP 76392 58 MHS-48 75914 96
MDWS-42 75871 123 MHP-1248 77716 47 MHP-EP 76392 109 MHS-48-ESAC 77844 114
MDWS-42P 78748 123 MHP-1248P 78612 48 MHP-EP 76392 113 MHS-48-S/S 77605 101
MDWS-48 75872 123 MHP-1254 77717 47 MHP-EP 76392 117 MHS-48P 78740 99
MDWS-48P 78749 123 MHP-1254P 78613 48 MHP-EP-S/S 77599 46 MHS-48R 76617 99
MDWS-54 75873 123 MHP-1260 77718 47 MHPBPK 77728 53 MHS-48R-S/S 77644 101
MDWS-54P 78750 123 MHP-1260P 78614 48 MHPMPK 77727 53 MHS-48RMV 79629 97
MDWS-60 75874 123 MHP-1272 77719 47 MHPMPK 77727 58 MHS-48RU 79742 98
MDWS-60P 78751 123 MHP-1272P 78615 48 MHS-120-2ESAC 77852 114 MHS-48RUV 79753 98
MDWS-72 75875 123 MHP-1284 77720 47 MHS-120V-2ESAC 77865 114 MHS-48RV 76651 99
MDWS-72P 78752 123 MHP-1284P 78616 48 MHS-18RMV 79624 97 MHS-48RV-S/S 77653 101
MDWS-84 76806 123 MHP-1296 77721 47 MHS-18RUV 79748 98 MHS-48V 76174 96
MDWS-84P 78753 123 MHP-1296P 78617 48 MHS-18RV 76646 99 MHS-48V-ESAC 77857 114
MDWS-96 79063 123 MHP-1836 78591 47 MHS-18V 76169 96 MHS-48V-MST 79447 97
MDWS-96P 79064 123 MHP-1836P 78618 48 MHS-18V-MST 79442 97 MHS-48V-S/S 77614 101
MHS-54 75915 96 MHS-CARK-C24/600 77929 115 MIB36CSK 90239 178 MMP-624P 78706 41
MHS-54-ESAC 77845 114 MHS-CARK-C30/750 77930 115 MIB36WPK 90247 175 MMP-630 76451 39
MHS-54-S/S 77606 101 MHS-CARK-C36/900 77931 115 MIB36WPK 90247 178 MMP-630-S/S 77425 40
MHS-54P 78741 99 MHS-CARK-C42/1050 77932 115 MIB42-2H 79974 176 MMP-630P 78707 41
MHS-54R 76618 99 MHS-CARK-C48/1200 77933 115 MIB42CPK 90256 178 MMP-636 76452 39
MHS-54R-S/S 77645 101 MHS-CARK-C54/1350 77934 115 MIB42CSK 90240 175 MMP-636-S/S 77426 40
MHS-54RMV 79630 97 MHS-CARK-C60/1500 77935 115 MIB42CSK 90240 178 MMP-636P 78708 41
MHS-54RU 79743 98 MHS-CARK-C72/1800 77936 115 MIB42WPK 90248 175 MMP-642 76453 39
MHS-54RUV 79754 98 MHS-CARK-V24/600 77937 115 MIB42WPK 90248 178 MMP-642-S/S 77427 40
MHS-54RV 76652 99 MHS-CARK-V30/750 77938 115 MIB48-2H 79975 176 MMP-642P 78709 41
MHS-54RV-S/S 77654 101 MHS-CARK-V36/900 77939 115 MIB48CPK 90257 178 MMP-648 76454 39
MHS-54V 76175 96 MHS-CARK-V42/1050 77940 115 MIB48CSK 90241 175 MMP-648-S/S 77428 40
MHS-54V-ESAC 77858 114 MHS-CARK-V48/1200 77941 115 MIB48CSK 90241 178 MMP-648P 78710 41
MHS-54V-MST 79448 97 MHS-CARK-V54/1350 77942 115 MIB48WPK 90249 175 MMP-654 76455 39
MHS-54V-S/S 77615 101 MHS-CARK-V60/1500 77943 115 MIB48WPK 90249 178 MMP-654-S/S 77429 40
MHS-60 75916 96 MHS-CARK-V72/1800 77944 115 MIB54-2H 79976 176 MMP-654P 78711 41
MHS-60-2ESAC 77848 114 MHS-CARK2-C120/3000 77949 115 MIB54CPK 90258 178 MMP-660 76456 39
MHS-60-ESAC 77846 114 MHS-CARK2-C60/1500 77945 115 MIB54CSK 90242 175 MMP-660-S/S 77430 40
MHS-60-S/S 77607 101 MHS-CARK2-C72/1800 77946 115 MIB54CSK 90242 178 MMP-660P 78712 41
MHS-60P 78742 99 MHS-CARK2-C84/2100 77947 115 MIB54WPK 90250 175 MMP-672 76457 39
MHS-60R 76619 99 MHS-CARK2-C96/2400 77948 115 MIB54WPK 90250 178 MMP-672-S/S 77431 40
MHS-60R-S/S 77646 101 MHS-CARK2-V120/3000 77954 115 MIB60-2H 79977 176 MMP-672P 78713 41
MHS-60RMV 79631 97 MHS-CARK2-V60/1500 77950 115 MIB60CPK 90259 178 MMP-684 76798 39
MHS-60RU 79744 98 MHS-CARK2-V72/1800 77951 115 MIB60CSK 90243 175 MMP-684-S/S 77432 40
MHS-60RUV 79755 98 MHS-CARK2-V84/2100 77952 115 MIB60CSK 90243 178 MMP-684P 78714 41
MHS-60RV 76653 99 MHS-CARK2-V96/2400 77953 115 MIB60WPK 90251 175 MMP-696 79033 39
MHS-60RV-S/S 77655 101 MHSP-18 76178 95 MIB60WPK 90251 178 MMP-696-S/S 79035 40
MHS-60V 76176 96 MHSP-18 76178 103 MIB72-2H 79978 176 MMP-696P 79037 41
MHS-60V-2ESAC 77861 114 MHSP-24 75918 95 MIB72CPK 90260 178 MMPBPK 76466 45
MHS-60V-ESAC 77859 114 MHSP-24 75918 103 MIB72CSK 90244 175 MMPBPK 76466 146
MHS-60V-MST 79449 97 MHSP-30 75919 95 MIB72CSK 90244 178 MMPBPK-S/S 77600 46
MHS-60V-S/S 77616 101 MHSP-30 75919 103 MIB72WPK 90252 175 MMPCP24 76458 45
MHS-72 75917 96 MHSP-36 75920 95 MIB72WPK 90252 178 MMPCP24 76458 53
MHS-72-2ESAC 77849 114 MHSP-36 75920 103 MMBK 75830 131 MMPCP24-S/S 77590 46
MHS-72-ESAC 77847 114 MHSP-42 75921 95 MMKU 77324 121 MMPCP30 76459 45
MHS-72-S/S 77608 101 MHSP-42 75921 103 MMKU-S/S 77357 122 MMPCP30 76459 53
MHS-72P 78743 99 MHSP-48 75922 95 MMKUHD 77327 121 MMPCP30-S/S 77591 46
MHS-72R 76620 99 MHSP-48 75922 103 MMKUHD-S/S 77358 122 MMPCP36 76460 45
MHS-72R-S/S 77647 101 MHSP-54 75923 95 MMP-1230 76551 39 MMPCP36 76460 53
MHS-72RMV 79632 97 MHSP-54 75923 103 MMP-1230-S/S 77433 40 MMPCP36-S/S 77592 46
MHS-72RU 79745 98 MHSP-60 75924 95 MMP-1230P 78715 41 MMPCP42 76461 45
MHS-72RUV 79756 98 MHSP-60 75924 103 MMP-1236 76552 39 MMPCP42 76461 53
MHS-72RV 76654 99 MHSP-72 75925 95 MMP-1236-S/S 77434 40 MMPCP42-S/S 77593 46
MHS-72RV-S/S 77656 101 MHSP-72 75925 103 MMP-1236P 78716 41 MMPCP48 76462 45
MHS-72V 76177 96 MHSP-84 76814 103 MMP-1242 76553 39 MMPCP48 76462 53
MHS-72V-2ESAC 77862 114 MHSP-96 79052 103 MMP-1242-S/S 77435 40 MMPCP48-S/S 77594 46
MHS-72V-ESAC 77860 114 MHSP24-S/S 77620 105 MMP-1242P 78717 41 MMPCP54 76463 45
MHS-72V-MST 79450 97 MHSP30-S/S 77621 105 MMP-1248 76554 39 MMPCP54 76463 53
MHS-72V-S/S 77617 101 MHSP36-S/S 77622 105 MMP-1248-S/S 77436 40 MMPCP54-S/S 77595 46
MHS-84 76803 96 MHSP42-S/S 77623 105 MMP-1248P 78718 41 MMPCP60 76464 45
MHS-84-2ESAC 77850 114 MHSP48-S/S 77624 105 MMP-1254 76555 39 MMPCP60 76464 53
MHS-84-S/S 77609 101 MHSP54-S/S 77625 105 MMP-1254-S/S 77437 40 MMPCP60-S/S 77596 46
MHS-84P 78744 99 MHSP60-S/S 77626 105 MMP-1254P 78719 41 MMPCP72 76465 45
MHS-84R 76621 99 MHSP72-S/S 77627 105 MMP-1260 76556 39 MMPCP72 76465 53
MHS-84R-S/S 77648 101 MHSP84-S/S 77628 105 MMP-1260-S/S 77438 40 MMPCP72-S/S 77597 46
MHS-84RU 79746 98 MHSP96-S/S 79053 105 MMP-1260P 78720 41 MMPCP84 76808 45
MHS-84RUV 79757 98 MIB2-1U 79379 175 MMP-1272 76557 39 MMPCP84 76808 53
MHS-84RV 76805 99 MIB2-1U 79379 178 MMP-1272-S/S 77439 40 MMPCP84-S/S 77598 46
MHS-84RV-S/S 77657 101 MIB2-1UF 79908 175 MMP-1272P 78721 41 MMPCP96 77722 45
MHS-84V 76804 96 MIB2-1UF 79908 178 MMP-1284 76799 39 MMPCP96 77722 53
MHS-84V-2ESAC 77863 114 MIB24-2H 79971 176 MMP-1284-S/S 77440 40 MMPCP96-S/S 78686 46
MHS-84V-S/S 77618 101 MIB24CPK 90253 178 MMP-1284P 78722 41 MMPK 76537 131
MHS-96 79043 96 MIB24CSK 90237 175 MMP-1296 79034 39 MORK 74921 206
MHS-96-2ESAC 77851 114 MIB24CSK 90237 178 MMP-1296-S/S 79036 40 MORK 74921 207
MHS-96-S/S 79048 101 MIB24WPK 90245 175 MMP-1296P 79038 41 MORKSD 74922 206
MHS-96P** 79047 99 MIB24WPK 90245 178 MMP-1836 77575 39 MORKSD 74922 207
MHS-96R 79045 99 MIB30-2H 79972 176 MMP-1842 77576 39 MRB18 77531 50
MHS-96R-S/S 79050 101 MIB30CPK 90254 178 MMP-1848 77577 39 MRB24 77532 50
MHS-96RU 79747 98 MIB30CSK 90238 175 MMP-1854 77578 39 MRB30 77533 50
MHS-96RUV 79758 98 MIB30CSK 90238 178 MMP-1860 77579 39 MRB36 77534 50
MHS-96RV 79046 99 MIB30WPK 90246 175 MMP-1872 77580 39 MRB42 77535 50
MHS-96RV-S/S 79051 101 MIB30WPK 90246 178 MMP-1884 77581 39 MRB48 77536 50
MHS-96V 79044 96 MIB36-2H 79973 176 MMP-1896 79040 39 MRB54 77537 50
MHS-96V-2ESAC 77864 114 MIB36CPK 90255 178 MMP-624 76450 39 MRB60 77538 50
MHS-96V-S/S 79049 101 MIB36CSK 90239 175 MMP-624-S/S 77424 40 MRB66 77539 50

MRB72 77540 50 MSPP42 75806 37 MXPP-1284 90627 62 P-CARK-C72/1800 78079 107
MRB78 77541 50 MSPP42 75806 126 MXPP-1296 90628 62 P-CARK-V24/600 78080 107
MRB84 77542 50 MSPP42-S/S 77475 38 MXPP-6108 90644 62 P-CARK-V30/750 78081 107
MRB90 77543 50 MSPP48 75807 37 MXPP-6120 90596 62 P-CARK-V36/900 78082 107
MSB24-2I 79979 173 MSPP48 75807 126 MXPP-642 90589 62 P-CARK-V42/1050 78083 107
MSB24RMK 79991 173 MSPP48-S/S 77476 38 MXPP-648 90590 62 P-CARK-V48/1200 78084 107
MSB30-2I 79980 173 MSPP54 75808 37 MXPP-654 90591 62 P-CARK-V54/1350 78085 107
MSB30RMK 79992 173 MSPP54 75808 126 MXPP-660 90592 62 P-CARK-V60/1500 78086 107
MSB36-2I 79981 173 MSPP54-S/S 77477 38 MXPP-672 90593 62 P-CARK-V72/1800 78087 107
MSB36RMK 79993 173 MSPP60 75809 37 MXPP-684 90594 62 P-CARK2-C120/3000 78092 107
MSB42-2I 79982 173 MSPP60 75809 126 MXPP-696 90595 62 P-CARK2-C60/1500 78088 107
MSB42RMK 79994 173 MSPP60-S/S 77478 38 MXPPBK 90607 62 P-CARK2-C72/1800 78089 107
MSB48-2I 79983 173 MSPP66 76695 126 MXPPE 90598 62 P-CARK2-C84/2100 78090 107
MSB48RMK 79995 173 MSPP72 75810 37 N6D3T-24-9-A45 26107 163 P-CARK2-C96/2400 78091 107
MSB54-2I 79984 173 MSPP72-S/S 77479 38 N6D3T-30-11-A45 26108 163 P-CARK2-V120/3000 78097 107
MSB54RMK 79996 173 MSPP84 76807 37 N6D3T-36-13-A45 26109 163 P-CARK2-V60/1500 78093 107
MSB60-2I 79985 173 MSPP84-S/S 77480 38 N6D3T-42-15-A45 26110 163 P-CARK2-V72/1800 78094 107
MSB60RMK 79997 173 MSPPL 75816 37 N6D3T-48-17-A45 26111 163 P-CARK2-V84/2100 78095 107
MSB72-2I 79986 173 MSPPL 75816 65 N6D3T-54-19-A45 26112 163 P-CARK2-V96/2400 78096 107
MSB72RMK 79998 173 MSPPL 75816 72 N6D3T-60-21-A45 26113 163 PAB 75513 77
MSBRMK 79987 175 MSPPL-S/S 77524 38 N6D3T-72-25-A45 26114 163 PAB 75513 89
MSP-224 75787 33 MSR 74914 206 NI6D3T-24-9-A45 26184 166 PAB 75513 92
MSP-224-S/S 77453 34 MSR2-S/S 90046 207 NI6D3T-24-9-A45 26184 175 PAB 75513 109
MSP-230 75788 33 MSR2 79378 206 NI6D3T-30-11-A45 26185 166 PAB 75513 113
MSP-230-S/S 77454 34 MSRSD 74915 206 NI6D3T-30-11-A45 26185 175 PAB 75513 130
MSP-236 75789 33 MSRSD-S/S 90055 207 NI6D3T-36-13-A45 26186 166 PAB 75513 140
MSP-236-S/S 77455 34 MST-MBL 79436 95 NI6D3T-36-13-A45 26186 175 PACB100 79656 104
MSP-242 75790 33 MST-MBL 79436 104 NI6D3T-42-15-A45 26187 166 PACB100 79656 126
MSP-242-S/S 77456 34 MST-MBR 79437 95 NI6D3T-42-15-A45 26187 175 PACB60 78683 45
MSP-248 75791 33 MST-MBR 79437 104 NI6D3T-48-17-A45 26188 166 PACB60 78683 53
MSP-248-S/S 77457 34 MSTAM 79435 95 NI6D3T-48-17-A45 26188 175 PACB60 78683 58
MSP-254 75792 33 MSTAM 79435 104 NI6D3T-54-19-A45 26189 166 PAK 78705 45
MSP-254-S/S 77458 34 MSTBK 79440 95 NI6D3T-54-19-A45 26189 175 PAK 78705 53
MSP-260 75793 33 MSTBK 79440 104 NI6D3T-60-21-A45 26190 166 PAK 78705 56
MSP-260-S/S 77459 34 MSTCHD 79439 95 NI6D3T-60-21-A45 26190 175 PAK 78705 58
MSP-272 75794 33 MSTCHD 79439 104 NI6D3T-72-25-A45 26191 166 PANK 78799 42
MSP-272-S/S 77460 34 MSTDB 79434 93 NI6D3T-72-25-A45 26191 175 PANK 78799 49
MSP-284 76796 33 MSTDB 79434 95 NS6DV-18-9.625-A45 26714 200 PANK 78799 55
MSP-284-S/S 77461 34 MSTDB 79434 104 NS6DV-18-9.625-A45 26714 202 PANK 78799 100
MSP-824 75795 33 MSTDB 79434 131 NS6DV-24-12.625-A45 26715 200 PANK 78799 124
MSP-824-S/S 77462 34 MSTGT 79441 95 NS6DV-24-12.625-A45 26715 202 PAT1 78684 42
MSP-830 75796 33 MSTGT 79441 104 NS6DV-30-15.625-A45 26716 200 PAT1 78684 49
MSP-830-S/S 77463 34 MSTHD-B 79433 95 NS6DV-30-15.625-A45 26716 202 PAT1 78684 55
MSP-836 75797 33 MSTHD-B 79433 104 NS6DV-36-18.625-A45 26717 200 PAT1 78684 100
MSP-836-S/S 77464 34 MSTHD-S 79432 95 NS6DV-36-18.625-A45 26717 202 PAT1 78684 124
MSP-842 75798 33 MSTHD-S 79432 104 NS6DV-42-21.625-A45 26718 200 PAT2 78685 42
MSP-842-S/S 77465 34 MSTHD-W 79431 95 NS6DV-42-21.625-A45 26718 202 PAT2 78685 49
MSP-848 75799 33 MSTHD-W 79431 104 NS6DV-48-24.625-A45 26719 200 PAT2 78685 55
MSP-848-S/S 77466 34 MSTPMHD 79451 95 NS6DV-48-24.625-A45 26719 202 PAT2 78685 100
MSP-854 75800 33 MSTPMHD 79451 104 NS6DV-54-27.625-A45 26720 200 PAT2 78685 124
MSP-854-S/S 77467 34 MXP-12108 90643 59 NS6DV-54-27.625-A45 26720 202 PATHK 78794 42
MSP-860 75801 33 MXP-12120 90588 59 NS6DV-60-30.625-A45 26721 200 PATHK 78794 49
MSP-872 75802 33 MXP-1248 90582 59 NS6DV-72-36.625-A45 26722 200 PATHK 78794 100
MSP-884 76797 33 MXP-1260 90584 59 NS7EV-48-24.625-A105 26723 200 PATHK* 78794 42
MSP-884-S/S 77471 34 MXP-1272 90585 59 NS7EV-48-24.625-A105 26723 202 PATHK* 78794 49
MSPBPK 75831 37 MXP-1284 90586 59 NS7EV-54-27.625-A105 26724 200 PATHK* 78794 55
MSPBPK 75831 126 MXP-1296 90587 59 NS7EV-54-27.625-A105 26724 202 PATHK* 78794 100
MSPBPK-S/S 77583 23 MXP-6108 90642 59 NS7EV-60-30.625-A105 26725 200 PATHK* 78794 124
MSPBPK-S/S 77583 38 MXP-6120 90400 59 NS7EV-60-30.625-A105 26725 202 PATLK 78791 42
MSPMPK 75811 37 MXP-642 90393 59 NS7EV-72-36.625-A105 26726 200 PATLK 78791 49
MSPMPK-S/S 77582 38 MXP-672 90397 59 NS7EV-96-48.625-A105 26728 200 PC120-2ESAC 77967 106
MSPMPK-S/S 77582 46 MXP-684 90398 59 NS7EV-96-48.625-A105 26728 202 PC18 74566 86
MSPP24 75803 37 MXP-696 90399 59 OIBBK 76950 188 PC24 74567 86
MSPP24-S/S 77472 38 MXPP-12108 90645 62 P-CARK-C24/600 78072 107 PC24-ESAC 77955 106
MSPP30 75804 37 MXPP-12120 90629 62 P-CARK-C30/750 78073 107 PC30 74568 86
MSPP30 75804 126 MXPP-1242 90622 62 P-CARK-C36/900 78074 107 PC30-ESAC 77956 106
MSPP30-S/S 77473 38 MXPP-1248 90623 62 P-CARK-C42/1050 78075 107 PC36 74569 86
MSPP36 75805 37 MXPP-1254 90624 62 P-CARK-C48/1200 78076 107 PC36-ESAC 77957 106
MSPP36 75805 126 MXPP-1260 90625 62 P-CARK-C54/1350 78077 107 PC42 74570 86
MSPP36-S/S 77474 38 MXPP-1272 90626 62 P-CARK-C60/1500 78078 107 PC42-ESAC 77958 106
PC48 74571 86 PST2-S 77724 56 PTM42R-S/S 90015 204 PTP-LS 79488 202
PC48-ESAC 77959 106 PST2-S 77724 58 PTM42T 74887 203 PTP-RMB 79490 202
PC54 74572 86 PST2-W 77723 53 PTM42T-S/S 90004 204 PTP-RPA 79476 202
PC54-ESAC 77960 106 PST2-W 77723 56 PTM42VR 79672 203 PTP-RRB 79491 202
PC60 74573 86 PST2-W 77723 58 PTM42VR-S/S 90026 204 PTP18R 79267 200
PC60-2ESAC 77963 106 PSTA 75896 37 PTM48R 74902 203 PTP24R 79268 200
PC60-ESAC 77961 106 PSTA 75896 45 PTM48R-S/S 90016 204 PTP30R 79269 200
PC72 74574 86 PSTA 75896 53 PTM48T 74888 203 PTP36R 79270 200
PC72-2ESAC 77964 106 PSTA 75896 58 PTM48T-S/S 90005 204 PTP42R 79271 200
PC72-ESAC 77962 106 PSTA 75896 65 PTM48VR 79673 203 PTP48R 79272 200
PC84-2ESAC 77965 106 PSTA 75896 72 PTM48VR-S/S 90027 204 PTP54R 79273 200
PC96-2ESAC 77966 106 PSTA 75896 121 PTM54R 74903 203 PTP60R 79274 200
PCAP-24/600 77913 109 PSTA-S/S 77442 38 PTM54R-S/S 90017 204 PTP72R 79275 200
PCAP-30/750 77914 109 PSTA-S/S 77442 46 PTM54T 74889 203 PTPHD48R 79276 200
PCAP-36/900 77915 109 PSTS-R 77726 53 PTM54T-S/S 90006 204 PTPHD54R 79277 200
PCAP-42/1050 77916 109 PSTS-R 77726 58 PTM54VR 79674 203 PTPHD60R 79278 200
PCAP-48/1200 77917 109 PSTS-S 75899 45 PTM54VR-S/S 90028 204 PTPHD72R 79279 200
PCAP-54/1350 77918 109 PSTS-S 75899 53 PTM60R 74904 203 PTPHD84R 79280 200
PCAP-60/1500 77919 109 PSTS-S 75899 58 PTM60R-S/S 90018 204 PTPHD96R 79281 200
PCAP-72/1800 77920 109 PSTS-S 75899 65 PTM60T 74890 203 PTPK 75897 53
PFC 75927 103 PSTS-S 75899 72 PTM60T-S/S 90007 204 PTPK 75897 58
PFC 75927 117 PSTS-W 75898 37 PTM60VR 79675 203 PTPLB 79470 202
PFC-SS 76560 103 PSTS-W 75898 45 PTM60VR-S/S 90029 204 PTPLB-HD 79473 202
PFC-SS 76560 105 PSTS-W 75898 53 PTMHD54R 74905 203 PTS-18R 77664 197
PFRS 76622 99 PSTS-W 75898 58 PTMHD54R-S/S 90019 204 PTS-24R 77665 197
PFRS 76622 103 PSTS-W 75898 65 PTMHD54T 74891 203 PTS-30R 77666 197
PFRS 76622 105 PSTS-W 75898 72 PTMHD54T-S/S 90008 204 PTS-30R-UG 77673 197
PFRS 76622 114 PSTS-W 75898 121 PTMHD54VR 79665 203 PTS-36R 77667 197
PFRS 76622 117 PTEZ-18 90265 193 PTMHD54VR-S/S 90030 204 PTS-36R-UG 77674 197
PFS-ESAC 79073 114 PTEZ-24 90266 193 PTMHD60R 74906 203 PTS-42R 77668 197
PFS-ESAC 79073 117 PTEZ-30 90267 193 PTMHD60R-S/S 90020 204 PTS-42R-UG 77675 197
PHA 73626 89 PTEZ-36 90268 193 PTMHD60T 74892 203 PTS-48R 77669 197
PHA 73626 109 PTEZ-42 90269 193 PTMHD60T-S/S 90009 204 PTS-48R-UG 77676 197
PLSC18 75588 87 PTEZ-48 90270 193 PTMHD60VR 79666 203 PTS-54R 77670 197
PLSC24 75589 87 PTEZDC 90353 193 PTMHD60VR-S/S 90031 204 PTS-54R-UG 77677 197
PLSC30 75590 87 PTEZHD-42/1050 90616 193 PTMHD72R 74907 203 PTS-60R 77671 197
PLSC36 75591 87 PTEZHD-42/1050-UG 90798 193 PTMHD72R-S/S 90021 204 PTS-60R-UG 77678 197
PLSC42 75592 87 PTEZHD-48/1200 90617 193 PTMHD72T 74893 203 PTS-72R 77672 197
PLSC48 75593 87 PTEZHD-48/1200-UG 90799 193 PTMHD72T-S/S 90010 204 PTS-72R-UG 77679 197
PLSC54 75594 87 PTEZHD-54/1350 90618 193 PTMHD72VR 79667 203 PTS-DRK 90100 199
PLSP18 75595 89 PTEZHD-54/1350-UG 90800 193 PTMHD72VR-S/S 90032 204 PTS-EBK 77702 199
PLSP24 75596 89 PTEZHD-56/1400 90795 193 PTMHD84R 74908 203 PTS-HDSR 77692 199
PLSP30 75597 89 PTEZHD-60/1500 90619 193 PTMHD84R-S/S 90022 204 PTS-HIBK 77697 199
PLSP36 75598 89 PTEZHD-60/1500-UG 90801 193 PTMHD84T 74894 203 PTS-IBK 77696 199
PLSP42 75599 89 PTEZHD-64/1600 90796 193 PTMHD84T-S/S 90011 204 PTS-LHSAA 77756 199
PLSP48 75600 89 PTEZHD-72/1800 90620 193 PTMHD84VR 79668 203 PTS-MBK 77700 199
PLSP54 75601 89 PTEZHD-72/1800-UG 90802 193 PTMHD84VR-S/S 90033 204 PTS-MBKUG 77701 199
PMSMK 74916 206 PTEZHD-80/2000 90797 193 PTMSD120R 74912 203 PTS-PA 77699 199
PMSMK2-S/S 90047 207 PTEZHD-84/2100 90621 193 PTMSD120R-S/S 90041 204 PTS-PS 77698 199
PMSMK2 79380 206 PTEZHD-DCK 90805 193 PTMSD120T 74898 203 PTS-RHSAA 77755 199
PMSMKSD 74917 206 PTEZHD-JBBK 90807 193 PTMSD120T-S/S 90037 204 PTS-RR21 77680 197
PMSMKSD-S/S 90056 207 PTEZHD-MBK 90803 193 PTMSD120VR 90054 203 PTS-RR27 77681 197
PP-18 78414 89 PTEZHD-PBK 90804 193 PTMSD120VR-S/S 90045 204 PTS-RR33 77682 197
PP-24 78416 89 PTEZHD-WRBK 90806 193 PTMSD72R 74909 203 PTS-RR39 77683 197
PP-30 78418 89 PTEZMB 90351 193 PTMSD72R-S/S 90038 204 PTS-RR39 77683 197
PP-36 78420 89 PTEZPB 90352 193 PTMSD72T 74895 203 PTS-RR45 77684 197
PP-42 78422 89 PTM24R 75584 203 PTMSD72T-S/S 90034 204 PTS-RR45 77684 197
PP-48 78424 89 PTM24R-S/S 90012 204 PTMSD72VR 90051 203 PTS-RR51 77685 197
PP-54 78425 89 PTM24T 75583 203 PTMSD72VR-S/S 90042 204 PTS-RR51 77685 197
PP-60 78451 89 PTM24T-S/S 90001 204 PTMSD84R 74910 203 PTS-RR57 77686 197
PP72 73017 89 PTM24VR 79669 203 PTMSD84R-S/S 90039 204 PTS-RR57 77686 197
PPS6 73024 89 PTM24VR-S/S 90023 204 PTMSD84T 74896 203 PTS-RR63 77687 197
PSA150 73156 86 PTM30R 74899 203 PTMSD84T-S/S 90035 204 PTS-RR63 77687 197
PSA150 73156 89 PTM30R-S/S 90013 204 PTMSD84VR 90052 203 PTS-RR69 77688 197
PSA150 73156 106 PTM30T 74885 203 PTMSD84VR-S/S 90043 204 PTS-RR75 77689 197
PSA150 73156 109 PTM30T-S/S 90002 204 PTMSD96R 74911 203 PTS-RR81 77690 197
PSSS 74773 89 PTM30VR 79670 203 PTMSD96R-S/S 90040 204 PTS-SAK 77694 199
PSSS 74773 95 PTM30VR-S/S 90024 204 PTMSD96T 74897 203 PTS-SR 77691 199
PSSS 74773 99 PTM36R 74900 203 PTMSD96T-S/S 90036 204 PTS-WMK 78767 199
PSSS 74773 103 PTM36R-S/S 90014 204 PTMSD96VR 90053 203 PV-18 78453 86
PSSS 74773 105 PTM36T 74886 203 PTMSD96VR-S/S 90044 204 PV-24 78415 86
PST2-R 77725 53 PTM36T-S/S 90003 204 PTP-EBKR 79484 202 PV-30 78417 86
PST2-R 77725 56 PTM36VR 79671 203 PTP-HDEBKR 79486 202 PV-36 78419 86
PST2-R 77725 58 PTM36VR-S/S 90025 204 PTP-HDRBK 79492 202 PV-42 78421 86
PST2-S 77724 53 PTM42R 74901 203 PTP-HDRPA 79478 202 PV-48 78423 86

PV-54 78454 86 QMTS-P 75845 18 RBAGS-36 76970 147 RBQB1-60/1500 90950 145
PV-60 78455 86 QMTS-P 75845 37 RBAGS-40 75999 147 RBQB1-64/1600 90951 145
PV120-2ESAC 77993 106 QMTS-P 75845 45 RBAGS-42 76971 147 RBQB1-70/1750 90952 145
PV24-ESAC 77981 106 QMTS-P 75845 65 RBAGS-46 76028 147 RBQB1-72/1800 90953 145
PV30-ESAC 77982 106 QMTS-P 75845 72 RBAGS-48 76972 147 RBQC1HD-12 75985 148
PV36-ESAC 77983 106 QMTS-P 75845 121 RBAGS-52 76029 147 RBQC1HD-18 75986 148
PV42-ESAC 77984 106 QMTS-P-S/S 77450 23 RBAGS-54 76973 147 RBQC1HD-24 75987 148
PV60-2ESAC 77989 106 QMTS-S-S/S 79056 46 RBAGS-70 76031 147 RBQC1HD-42 75990 148
PV60-ESAC 77987 106 QMTS-W-S/S 77451 23 RBAGS-72 76975 147 RBQC1HD-48 75991 148
PV72 73438 86 QMTS-W-S/S 77451 38 RBAGS-84 76976 147 RBQC1HD-54 75992 148
PV72-2ESAC 77990 106 QMTS-W-S/S 77451 46 RBAGSCM-16 76572 148 RBQC1HD-66 75993 148
PV72-ESAC 77988 106 R-CARK-C24/600 78098 111 RBAGSCM-22 76573 148 RBSE-10 79861 149
PV84-2ESAC 77991 106 R-CARK-C30/750 78099 111 RBAGSCM-28 76574 148 RBSE-16 79862 149
PV96-2ESAC 77992 106 R-CARK-C36/900 78100 111 RBAGSCM-34 76575 148 RBSE-22 79863 149
QB1PCK 90954 145 R-CARK-C42/1050 78101 111 RBAGSCM-40 76576 148 RBSE-28 79864 149
QMT-G 76483 37 R-CARK-C48/1200 78102 111 RBAGSCM-46 76577 148 RBSE-34 79865 149
QMT-G 76483 45 R-CARK-C54/1350 78103 111 RBAGSCM-52 76578 148 RBSE-40 79866 149
QMT-G-S/S 77586 38 R-CARK-C60/1500 78104 111 RBAGSCM-58 76579 148 RBSE-46 79867 149
QMT-G-S/S 77586 46 R-CARK-C72/1800 78105 111 RBAGSCM-70 76581 148 RBSE-52 79868 149
QMT-P 76074 37 R-CARK-V24/600 78106 111 RBAS4-18 76032 150 RBSE-58 79869 149
QMT-P 76074 72 R-CARK-V42/1050 78109 111 RBAS4-36 76035 150 RC120-2ESAC 77980 110
QMT-P-S/S 77584 38 R-CARK-V48/1200 78110 111 RBAS4-42 76036 150 RC18 74618 90
QMT-P-S/S 77584 46 R-CARK-V54/1350 78111 111 RBAS4-48 76037 150 RC24 74619 90
QMT-S 79039 45 R-CARK-V60/1500 78112 111 RBAS4-54 76038 150 RC24-ESAC 77968 110
QMT-S 79039 65 R-CARK-V72/1800 78113 111 RBAS4-60 76039 150 RC30 74620 90
QMT-S 79039 72 R-CARK2-C120/3000 78118 111 RBAS4-72 76040 150 RC30-ESAC 77969 110
QMT-S-S/S 79059 46 R-CARK2-C60/1500 78114 111 RBDT-6C 90614 154 RC36 74621 90
QMT-W 76075 37 R-CARK2-C72/1800 78115 111 RBDTXHD-13C 90615 155 RC36-ESAC 77970 110
QMT-W 76075 45 R-CARK2-C84/2100 78116 111 RBDTXHD-6.5C 77517 155 RC42 74622 90
QMT-W 76075 65 R-CARK2-C96/2400 78117 111 RBP1R-L 90648 190 RC42-ESAC 77971 110
QMT-W 76075 72 R-CARK2-V120/3000 78123 111 RBP1R-M 90647 190 RC48 74623 90
QMT-W-S/S 77585 38 R-CARK2-V60/1500 78119 111 RBP1R-S 90646 190 RC48-ESAC 77972 110
QMT-W-S/S 77585 46 R-CARK2-V72/1800 78120 111 RBP1R-XL 90649 190 RC54 74624 90
QMTBK-G 76540 37 R-CARK2-V84/2100 78121 111 RBP1S-L 74560 190 RC54-ESAC 77973 110
QMTBK-G 76540 38 R-CARK2-V96/2400 78122 111 RBP1S-M 74559 190 RC60 74625 90
QMTBK-G 76540 45 RAPEK 77423 131 RBP1S-S 74558 190 RC60-2ESAC 77976 110
QMTBK-G 76540 46 RB38BP 79481 148 RBP1S-XL 74561 190 RC60-ESAC 77974 110
QMTBK-P 76097 37 RB38BP 79481 150 RBPFK-L 75524 192 RC72 74626 90
QMTBK-P 76097 38 RB38BP 79481 151 RBPFK-M 75523 192 RC72-2ESAC 77977 110
QMTBK-P 76097 45 RB6DH 76571 153 RBPFK-S 75522 192 RC72-ESAC 77975 110
QMTBK-P 76097 46 RB6SA 76570 152 RBPFK-XL 75525 192 RC84-2ESAC 77978 110
QMTBK-P 76097 65 RBAER-10 76041 151 RBPIT-L 75529 192 RC96-2ESAC 77979 110
QMTBK-P 76097 72 RBAER-16 76042 151 RBPIT-M 75528 192 RCAP-24/600 77921 113
QMTBK-W 76098 37 RBAER-22 76043 151 RBPIT-S 75527 192 RCAP-30/750 77922 113
QMTBK-W 76098 38 RBAER-28 76044 151 RBPIT-XL 75530 192 RCAP-36/900 77923 113
QMTBK-W 76098 45 RBAER-34 76045 151 RBPMBK 75526 192 RCAP-42/1050 77924 113
QMTBK-W 76098 46 RBAER-40 76046 151 RBPRET 73163 192 RCAP-48/1200 77925 113
QMTBK-W 76098 53 RBAER-44 76655 151 RBPRET 73163 199 RCAP-54/1350 77926 113
QMTBK-W 76098 58 RBAER-46 76047 151 RBPRR-L 90652 192 RCAP-60/1500 77927 113
QMTBK-W 76098 65 RBAER-52 76048 151 RBPRR-M 90651 192 RCAP-72/1800 77928 113
QMTBK-W 76098 72 RBAER-58 76049 151 RBPRR-S 90650 192 RDP1-L 74694 157
QMTBK-W 76098 121 RBAER-70 76050 151 RBPRR-XL 90653 192 RDP1-M 74693 157
QMTPAK 76096 37 RBAGM-16 77106 28 RBPSR-L 74564 192 RDP1-S 74692 157
QMTPAK 76096 45 RBAGM-16 77106 147 RBPSR-M 74563 192 RDP1-XL 74695 157
QMTPAK 76096 65 RBAGM-22 77107 28 RBPSR-S 74562 192 RDPBK-L 74701 157
QMTPAK 76096 72 RBAGM-22 77107 147 RBPSR-XL 74565 192 RDPBK-L 74701 159
QMTPAK 76096 121 RBAGM-28 77108 28 RBQB1-16/400 90935 145 RDPBK-M 74700 157
QMTPAK-S/S 77587 38 RBAGM-28 77108 147 RBQB1-18/450 90936 145 RDPBK-M 74700 159
QMTPAK-S/S 77587 46 RBAGM-34 77109 28 RBQB1-22/550 90937 145 RDPBK-S 74699 157
QMTPSBK 76099 37 RBAGM-34 77109 147 RBQB1-24/600 90938 145 RDPBK-S 74699 159
QMTPSBK 76099 45 RBAGM-40 77110 28 RBQB1-28/700 90939 145 RDPBK-XL 74702 157
QMTPSBK 76099 65 RBAGM-40 77110 147 RBQB1-30/750 90940 145 RDPBK-XL 74702 159
QMTPSBK 76099 72 RBAGM-46 77111 28 RBQB1-34/850 90941 145 RDPF-L 75568 159
QMTPSBK 76099 121 RBAGM-46 77111 147 RBQB1-36/900 90942 145 RDPF-M 75567 159
QMTPSBK-S/S 77588 38 RBAGS-16 75995 147 RBQB1-40/1000 90943 145 RDPF-S 75566 159
QMTPSBK-S/S 77588 46 RBAGS-18 76967 147 RBQB1-42/1050 90944 145 RDPF-XL 75569 159
QMTS-G 76484 37 RBAGS-22 75996 147 RBQB1-46/1150 90945 145 RDPMBK 74698 159
QMTS-G 76484 45 RBAGS-24 76968 147 RBQB1-48/1200 90946 145 RDPMSK 74705 159
QMTS-G-S/S 77452 23 RBAGS-28 75997 147 RBQB1-52/1300 90947 145 RMC1 75817 209
QMTS-G-S/S 77452 38 RBAGS-30 76969 147 RBQB1-54/1350 90948 145 RMC1-BCP 76414 209
QMTS-G-S/S 77452 46 RBAGS-34 75998 147 RBQB1-58/1450 90949 145 RMC1-BPP 76415 209
RMC1-BPP 76415 211 SACPL-30/750 77888 113 SB5 78790 163 SST2HD-W-S/S 77637 105
RMC1-BULK 75833 209 SACPL-30/750 77888 117 SB5 78790 166 SSTBK-B 76637 103
RMC1-CB 75820 209 SACPL-36/900 77889 109 SB5 78790 169 SSTBK-B 76637 105
RMC1-CB 75820 211 SACPL-36/900 77889 113 SB5 78790 172 SSTBK-B 76637 117
RMC1-CP 75819 209 SACPL-36/900 77889 117 SB5 78790 180 SSTBK-B 76637 126
RMC1-LS 75834 209 SACPL-42/1050 77890 109 SB5 78790 182 SSTBK-W 76636 103
RMC1-LSBPP 76538 209 SACPL-42/1050 77890 113 SB5 78790 184 SSTBK-W 76636 105
RMC1-LSPP 75836 209 SACPL-42/1050 77890 117 SB5 78790 186 SSTBK-W 76636 117
RMC1-PL 75821 209 SACPL-48/1200 77891 109 SHIM-KITH 77550 184 SSTBK-W 76636 126
RMC1-PP 75832 209 SACPL-48/1200 77891 113 SHIM-KITL 77548 163 SSTHB 79582 103
RMC1LS-PL 75835 209 SACPL-48/1200 77891 117 SHIM-KITL 77548 166 SSTHB 79582 117
RMC2 77330 211 SACPL-54/1350 77892 109 SHIM-KITL 77548 169 SSTHB 79582 126
RMC2-FS-1 76558 211 SACPL-54/1350 77892 113 SHIM-KITL 77548 180 SSTHB-S/S 79586 105
RMC2-FSAPK 76559 211 SACPL-54/1350 77892 117 SHIM-KITM 77549 172 SSTHDMK 77870 103
RP-18 78426 92 SACPL-60/1500 77893 109 SHIM-KITM 77549 182 SSTHDMK 77870 117
RP-24 78427 92 SACPL-60/1500 77893 113 SHIM-KITMOD 79989 175 SSTHDMK 77870 126
RP-30 78428 92 SACPL-60/1500 77893 117 SHIM-KITMOD 79989 178 SSTHDPM 77868 103
RP-36 78429 92 SACPL-72/1800 77894 109 SKPU-6x1/2x25 90283 208 SSTHDPM 77868 117
RP-42 78430 92 SACPL-72/1800 77894 113 SKPU-6x3/4x25 90284 208 SSTHDPM 77868 126
RP-48 78431 92 SACPL-72/1800 77894 117 SKPU-8x1/2x25 90285 208 SSTHK 79070 103
RP-54 78432 92 SACPL2-120/3000 77899 109 SKPU-8x3/4x25 90286 208 SSTHK 79070 117
RP-60 78433 92 SACPL2-120/3000 77899 113 SPBV 74742 135 SSTHK 79070 126
RP-72 74612 92 SACPL2-120/3000 77899 117 SPCP 74734 135 SSTHK-S/S 79071 105
RSA 76249 92 SACPL2-60/1500 77895 109 SPG 74747 135 SSTLBK 79493 103
RSA 76249 113 SACPL2-60/1500 77895 113 SPG-CVR-A 77387 132 SSTLBK 79493 105
RSA150 73628 90 SACPL2-60/1500 77895 117 SPG-CVR-B 77388 132 SSTLBK 79493 117
RSA150 73628 92 SACPL2-72/1800 77896 109 SPG-CVR-C 77389 132 SSTLBK 79493 126
RSA150 73628 93 SACPL2-72/1800 77896 113 SPG-CVR-D 77390 132 SSTLMB 76072 131
RSA150 73628 95 SACPL2-72/1800 77896 117 SPG-CVR-E 77391 132 SSTOTA 76073 131
RSA150 73628 96 SACPL2-84/2100 77897 109 SPG-CVR-F 77392 132 SSTSMB 76071 131
RSA150 73628 97 SACPL2-84/2100 77897 113 SPG-CVR-G 77393 132 STAK 75847 117
RSA150 73628 98 SACPL2-84/2100 77897 117 SPG-CVR-H 77741 132 STAK 75847 103
RSA150 73628 99 SACPL2-96/2400 77898 109 SPH10 74745 135 STAK 75847 105
RSA150 73628 103 SACPL2-96/2400 77898 113 SPK18 74709 135 STAK 75847 126
RSA150 73628 105 SACPL2-96/2400 77898 117 SPK24 74710 135 STAKHD 75892 103
RSA150 73628 110 SACRH 77883 109 SPK30 74711 135 STAKHD 75892 105
RSA150 73628 117 SACRHL 77884 109 SPK48 74714 135 STGK2 77867 103
RV-18 78402 90 SACRHL 77884 113 SPK54 74715 135 STGK2 77867 104
RV-24 78403 90 SACRHL 77884 117 SPK60 74716 135 STGK2 77867 117
RV-30 78404 90 SACRKN 77882 109 SPK72 74717 135 STGK2 77867 126
RV-36 78405 90 SACRKN 77882 113 SPKHD120 74721 135 STGK2 77867 126
RV-42 78406 90 SACRKN 77882 117 SPKHD42 74952 135 STGK2-S/S 77635 105
RV-48 78407 90 SACRKT 77886 109 SPKHD48 74953 135 STHDMK2-S/S 77634 105
RV-54 78408 90 SACRKT 77886 113 SPKHD54 74954 135 STHDPM2-S/S 77633 105
RV-60 78409 90 SACRKT 77886 117 SPKHD60 74955 135 STJK 74417 18
RV120-2ESAC 78006 110 SACSK 77052 117 SPKHD72 74718 135 STJK 74417 121
RV24-ESAC 77994 110 SACSRC 77065 117 SPKHD84 74719 135 STJK 74417 139
RV30-ESAC 77995 110 SAT2AK 78733 103 SPKHD96 74720 135 STJK-S/S 77334 122
RV36-ESAC 77996 110 SAT2AK 78733 104 SPMK2 75578 135 STJM 74775 18
RV42-ESAC 77997 110 SAT2AK 78733 126 SPMK3 75579 135 STJM 74775 121
RV48-ESAC 77998 110 SAT2MK 78704 104 SPN 74746 135 STJM 74775 139
RV54-ESAC 77999 110 SAT2MK 78704 126 SPPN 74748 135 STJM-S/S 77332 122
RV60-2ESAC 78002 110 SAT2NCB 78703 104 SPPR 74744 135 STKD 74504 139
RV60-ESAC 78000 110 SAT2NCB 78703 126 SPYS 74743 135 STKHSD 74316 139
RV72 74641 90 SAT2PAT 78735 104 SRBK 74941 136 STKHSS 74313 139
RV72-2ESAC 78003 110 SAT2PAT 78735 126 SSRB 75978 58 STKS 74505 139
RV72-ESAC 78001 110 SAT2PM 78732 104 SST-BUK 76943 103 STLP 79535 129
RV84-2ESAC 78004 110 SAT2PM 78732 126 SST-BUK 76943 126 STS-B 75844 85
RV96-2ESAC 78005 110 SATB 76083 104 SST-BUK-S/S 77636 105 STS-B 75844 95
RVT6-S/S 76205 105 SATB 76083 126 SST1HD-B 77878 117 STS-B 75844 103
SAC2-TIP-TL 77866 109 SATHB 76084 104 SST1HD-S 77877 117 STS-B 75844 104
SAC2-TIP-TL 77866 113 SATHB 76084 126 SST1HD-W 77876 117 STS-B 75844 117
SAC2-TIP-TL 77866 117 SB2 79970 175 SST2HD-B 77881 103 STS-B 75844 126
SACHP2 77768 109 SB2 79970 178 SST2HD-B 77881 126 STS-B-S/S 77632 105
SACHP2 77768 113 SB2F 79988 175 SST2HD-B-S/S 77639 105 STS-G 78142 103
SACHP2 77768 117 SB2F 79988 178 SST2HD-G 79041 103 STS-G 78142 126
SACKRP 77885 109 SB4 78789 163 SST2HD-G 79041 126 STS-G-S/S 79057 105
SACKRP 77885 113 SB4 78789 166 SST2HD-G-S/S 79042 105 STS-S 75843 85
SACKRP 77885 117 SB4 78789 169 SST2HD-S 77880 103 STS-S 75843 95
SACPL-24/600 77887 109 SB4 78789 172 SST2HD-S 77880 126 STS-S 75843 103
SACPL-24/600 77887 113 SB4 78789 180 SST2HD-S-S/S 77638 105 STS-S 75843 104
SACPL-24/600 77887 117 SB4 78789 182 SST2HD-W 77879 103 STS-S 75843 117
SACPL-30/750 77888 109 SB4 78789 184 SST2HD-W 77879 126 STS-S 75843 126

STS-S-S/S 77631 105 UPSBK 76784 121 UTC24 76713 118 VUBK-L 75573 156
STS-W 75846 95 URCB18/450 76748 118 UTC30 76714 118 VUBK-M 75572 156
STS-W 75846 103 URCB24/600 76749 118 UTC36 76715 118 VUBK-S 75571 156
STS-W 75846 104 URCB30/750 76750 118 UTC42 76716 118 VUBK-XS 75570 156
STS-W 75846 117 URCB36/900 76751 118 UTC48 76717 118 WCLN18-16 71131 219
STS-W 75846 126 URCB42/1050 76752 118 UTC54 76718 118 WCLN24-16 71132 219
STS-W-S/S 77630 105 URCB48/1200 76753 118 UTC60 76719 118 WCLN24-30 71150 219
STTS 74419 18 URCB54/1350 76754 118 UTC72 76720 118 WCLN30-16 71133 219
STTS 74419 121 URCB60/1500 76755 118 UTC84 76721 118 WCLN30-30 71134 219
STTS 74419 139 URCB72/1800 76756 118 UTF18 76724 118 WCLN36-16 71135 219
STTS-S/S 75585 122 URCB84/2100 76757 118 UTF24 76725 118 WCLN36-30 71136 219
TEN-LOCK-KIT 77443 132 URVB18/450 76736 118 UTF30 76726 118 WCLN42-16 71137 219
TRB-HT18 78754 43 URVB18/450 76736 119 UTF36 76727 118 WCLN42-30 71138 219
TRB-HT60 78761 43 URVB42/1050 76740 118 UTV1050J-S/S 77263 119 WCLN72-16 71151 219
TRB-HT66 78762 43 URVB42/1050 76740 119 UTV1200J-S/S 77264 119 WCLN72-30 71147 219
TRB-HT72 78763 43 URVB48/1200 76741 118 UTV1350J-S/S 77265 119 WFRD18-16 72187 218
TRB-HT78 78764 43 URVB48/1200 76741 119 UTV1500J-S/S 77267 119 WFRD18-30 72188 218
TRB18 76485 43 URVB54/1350 76742 118 UTV18 76700 118 WFRD24-16 72189 218
TRB18 76485 146 URVB54/1350 76742 119 UTV1800J-S/S 77269 119 WFRD24-30 72190 218
TRB24 76486 146 URVB60/1500 76743 119 UTV24 76701 118 WFRD30-30 72192 218
TRB30 76487 43 URVB72/1800 76744 118 UTV30 76702 118 WFRD36-16 72193 218
TRB30 76487 146 URVB72/1800 76744 119 UTV36 76703 118 WFRD36-30 72194 218
TRB36 76488 43 URVB84/2100 76745 118 UTV42 76704 118 WFRD42-16 72195 218
TRB42 76489 43 USB12 90409 59 UTV48 76705 118 WFRD48-16 72197 218
TRB42 76489 146 USB12 90409 62 UTV54 76706 118 WFRD48-30 72198 218
TRB48 76490 43 USB6 90410 59 UTV60 76707 118 WFRD54-16 72199 218
TRB48 76490 146 USB6 90410 62 UTV600J-S/S 77260 119 WFRD54-30 72200 218
TRB54 76491 43 USBBRP 90412 62 UTV72 76708 118 WFRD60-16 72201 218
TRB54 76491 146 USBP 90411 62 UTV750J-S/S 77261 119 WFRD60-30 72202 218
TRB60 76492 43 USMK 76792 121 UTV84 76709 118 WFRD72-16 72203 218
TRB60 76492 146 USMK 76792 121 UTV900J-S/S 77262 119 WFRD72-30 72204 218
TRB66 76493 43 USMK-S/S-M 82885 122 VAK 76416 159 WND18-16 72169 218
TRB66 76493 146 USMKHD-S/S-M 82886 122 VBK-72 74457 156 WND18-30 72170 218
TRB72 76494 43 USP18/450 76772 121 VBK-72 74457 159 WND24-16 72171 218
TRB72 76494 146 USP18/450-S/S 77339 122 VBK-84 74458 156 WND24-30 72172 218
TRB78 76697 43 USP24/600 76773 121 VBK-84 74458 159 WND30-16 72173 218
TRB78 76697 146 USP24/600-S/S 77340 122 VBK-96 74459 156 WND30-30 72174 218
TRB84 77047 43 USP30/750 76774 121 VBK-96 74459 159 WND36-16 72175 218
TRB84 77047 146 USP30/750-S/S 77341 122 VBK-L 73193 156 WND36-30 72176 218
TRB90 77048 43 USP36/900 76775 121 VBK-L 73193 159 WND42-16 72177 218
TRB90 77048 146 USP36/900-S/S 77342 122 VBK-M 73192 156 WND42-30 72178 218
UBTK 76977 121 USP42/1050 76776 121 VBK-M 73192 159 WND48-16 72179 218
UFB18 74448 118 USP42/1050-S/S 77343 122 VBK-S 73191 156 WND48-30 72180 218
UFB24 74449 118 USP48/1200 76777 121 VBK-S 73191 159 WND54-16 72181 218
UFB30 74450 118 USP48/1200-S/S 77344 122 VBK-XS 73190 156 WND54-30 72182 218
UFB36 74451 118 USP54/1350 76778 121 VBK-XS 73190 159 WND60-16 72183 218
UFB42 74452 118 USP54/1350-S/S 77345 122 VCS 73533 159 WND60-30 72184 218
UFB48 74453 118 USP60/1500 76779 121 VMBK 73399 159 WND72-16 72185 218
UFB54 74454 118 USP60/1500-S/S 77347 122 VMF72 74398 159 WND72-30 72186 218
UFB60 74455 118 USP72/1800 76780 121 VMF84 74399 159 XDST-B 90613 62
UFB72 74456 118 USP72/1800-S/S 77349 122 VMF96 74440 159 XDST-P 90612 62
UFB84 74460 118 USP84/2100 76781 121 VMFL 74038 159 XDST-W 90611 62
UHDBTK 76978 121 USP84/2100-S/S 77351 122 VMFM 74037 159 XDSTBK-B 90606 62
UHMK 76793 121 USPB2 79206 121 VMFS 73549 159 XDSTBK-P 90605 62
UHMK 76793 121 USPB2 79206 122 VMFXS 73535 159 XDSTBK-W 90604 62
UHPB2 79207 121 USPK 76790 121 VMLK 74982 159 XDSTJNK 90610 62
UHPB2 79207 122 USPK 76790 121 VP72 74395 159 XDSTMPK 90599 62
UHSPK 76791 121 UST-P 76794 121 VP84 74396 159 XDSTPAK 90600 62
UHSPK 76791 121 UST-S 77757 121 VP96 74397 159 XDSTPSBK 90608 62
UHVC 79453 65 UST-W 76795 121 VPL 73410 159 XDSTS-B 90603 62
UMBK 76789 121 USTSC 79299 121 VPM 73409 159 XDSTS-P 90602 62
UMBK 76789 121 USTSC 79299 121 VPS 73408 159 XDSTS-W 90601 62
UPBK 76785 121 USTSCHD 79300 121 VPXS 73400 159 XDSTTAK 90609 62
UPFCC 79320 98 USTSCHD 79300 121 VSC 74983 159 YCART-18/450-P 79617 79
UPFCC 79320 103 USTSCK 79202 121 VUBK-72 75574 156 YCART-18/450-P 79617 81
UPL-S/S-MT 82810 122 USTSCKHD 79204 121 VUBK-84 75575 156 YCART-18/450-TC 79811 79
UPLHD-S/S-MT 82811 122 UTC18 76712 118 VUBK-96 75576 156 YCART-18/450-TC 79811 81
YCART-18/450-W 79611 79 YCART-48/1200-P 79622 79 YSTHDMB 79849 85 YTAHD-36/900 79805 85
YCART-18/450-W 79611 81 YCART-48/1200-P 79622 81 YSTHDS-BL 79798 85 YTAHD-42/1050 79806 85
YCART-24/600-P 79618 79 YCART-48/1200-TC 79816 79 YSTHDS-GR 79797 85 YTAHD-48/1200 79807 85
YCART-24/600-P 79618 81 YCART-48/1200-TC 79816 81 YSTLBK 79846 81 YTAHD-54/1350 79808 85
YCART-24/600-TC 79812 79 YCART-48/1200-W 79616 79 YSTMB 79843 81 YTAHD-60/1500 79809 85
YCART-24/600-TC 79812 81 YCART-48/1200-W 79616 81 YSTPHDMK 79854 85 YTAHD-72/1800 79810 85
YCART-24/600-W 79612 79 YCART-54/1350-HDP 79820 83 YSTPMK 79848 81 YTHD-36S 79783 82
YCART-24/600-W 79612 81 YCART-54/1350-HDP 79820 85 YSTS-P 79796 81 YTHD-42S 79784 82
YCART-30/750-P 79619 79 YCART-54/1350-HDTC 79832 83 YSTS-Y 79795 81 YTHD-48S 79785 82
YCART-30/750-P 79619 81 YCART-54/1350-HDTC 79832 85 YSTTBK-B 79855 81 YTHD-54S 79786 82
YCART-30/750-TC 79813 79 YCART-54/1350-HDW 79826 83 YSTTBK-W 79847 81 YTHD-60S 79787 82
YCART-30/750-TC 79813 81 YCART-54/1350-HDW 79826 85 YT-18S 79765 78 YTHD-72S 79788 82
YCART-30/750-W 79613 79 YCART-60/1500-HDP 79821 83 YT-24S 79766 78 YTHD-TC-36S 79777 82
YCART-30/750-W 79613 81 YCART-60/1500-HDP 79821 85 YT-30S 79767 78 YTHD-TC-42S 79778 82
YCART-36/900-HDP 79817 83 YCART-60/1500-HDTC 79833 83 YT-36S 79768 78 YTHD-TC-48S 79779 82
YCART-36/900-HDP 79817 85 YCART-60/1500-HDTC 79833 85 YT-42S 79769 78 YTHD-TC-54S 79780 82
YCART-36/900-HDTC 79829 83 YCART-60/1500-HDW 79827 83 YT-48S 79770 78 YTHD-TC-60S 79781 82
YCART-36/900-HDTC 79829 85 YCART-60/1500-HDW 79827 85 YT-C 79574 81 YTHD-TC-72S 79782 82
YCART-36/900-HDW 79823 83 YCART-72/1800-HDP 79822 83 YT-C 79574 79 YTHDW-36S 79789 82
YCART-36/900-HDW 79823 85 YCART-72/1800-HDP 79822 85 YT-HDC 79728 85 YTHDW-42S 79790 82
YCART-36/900-P 79620 79 YCART-72/1800-HDTC 79834 83 YT-HDC 79728 83 YTHDW-48S 79791 82
YCART-36/900-P 79620 81 YCART-72/1800-HDTC 79834 85 YT-HDP 79677 85 YTHDW-54S 79792 82
YCART-36/900-TC 79814 79 YCART-72/1800-HDW 79828 83 YT-HDP 79677 83 YTHDW-60S 79793 82
YCART-36/900-TC 79814 81 YCART-72/1800-HDW 79828 85 YT-HDW 79676 85 YTHDW-72S 79794 82
YCART-36/900-W 79614 79 YST-P 79837 81 YT-HDW 79676 83 YTP-18/450 79587 81
YCART-36/900-W 79614 81 YST-S 79838 81 YT-P 79573 81 YTP-24/600 79588 81
YCART-42/1050-HDP 79818 83 YST-Y 79836 81 YT-P 79573 79 YTP-30/750 79589 81
YCART-42/1050-HDP 79818 85 YSTANK 79857 81 YT-TC-18S 79759 78 YTP-36/900 79590 81
YCART-42/1050-HDTC 79830 83 YSTANKHD 79858 85 YT-TC-24S 79760 78 YTP-42/1050 79591 81
YCART-42/1050-HDTC 79830 85 YSTDBK 79844 78 YT-TC-30S 79761 78 YTP-48/1200 79592 81
YCART-42/1050-HDW 79824 83 YSTDBK 79844 81 YT-TC-36S 79762 78 YTPHD-36/900 79799 85
YCART-42/1050-HDW 79824 85 YSTDBK 79844 131 YT-TC-42S 79763 78 YTPHD-42/1050 79800 85
YCART-42/1050-P 79621 79 YSTGBK 79845 81 YT-TC-48S 79764 78 YTPHD-48/1200 79801 85
YCART-42/1050-P 79621 81 YSTHD-BK 79842 85 YT-W 79572 81 YTPHD-54/1350 79802 85
YCART-42/1050-TC 79815 79 YSTHD-BL 79841 85 YT-W* 79572 79 YTPHD-60/1500 79803 85
YCART-42/1050-TC 79815 81 YSTHD-GR 79839 85 YTA-18/450 79593 81 YTPHD-72/1800 79804 85
YCART-42/1050-W 79615 79 YSTHD-S 79840 85 YTA-24/600 79594 81 YTW-18S 79771 78
YCART-42/1050-W 79615 81 YSTHDBK-B 79856 85 YTA-30/750 79595 81 YTW-24S 79772 78
YCART-48/1200-HDP 79819 83 YSTHDBK-W 79853 85 YTA-36/900 79596 81 YTW-30S 79773 78
YCART-48/1200-HDP 79819 85 YSTHDDBK 79850 82 YTA-42/1050 79597 81 YTW-36S 79774 78
YCART-48/1200-HDTC 79831 83 YSTHDDBK 79850 85 YTA-48/1200 79598 81 YTW-42S 79775 78
YCART-48/1200-HDTC 79831 85 YSTHDDBK 79850 131 YTAC 79623 81 YTW-48S 79776 78
YCART-48/1200-HDW 79825 83 YSTHDGBK 79851 85 YTACHD 79835 85 04140 213
YCART-48/1200-HDW 79825 85 YSTHDLBK 79852 85

Av. Jorge Alessandri 11.500 – Edificio 7
Megacentro San Bernardo, San Bernardo, Santiago, Chile
Teléfono: 56-2-2896-7870
Correo electrónico: [email protected]
www.flexco.com
©2018 Flexible Steel Lacing Company Printed in U.S.A.

For Reorder: X5437 11/28/18

Belt Conveyor

Uploaded by

Copyright:

Available Formats

Belt Conveyor

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Belt Conveyor

Uploaded by

Copyright:

Available Formats

Product

Av. Jorge Alessandri 11.500 – Edificio 7

Why Are Belt Cleaners Needed?

• Reduces Maintenance Costs

• Keeps Conveyors Running Efficiently

Types of Belt Cleaners Precleaner

C-Tip P V-Tip R V-Tip

The “Material Path” Option (for Precleaners)

Match blade width to belt’s material path

Belt Width Belt Width Belt Width

Blade Width Blade Width Blade Width

Blade Angle (Secondary Cleaners)

Keys to Good Belt Cleaning

Spec'ing and Ordering Belt Cleaners

PRECLEANER SPECIFICATION CHART (cont.)

PRECLEANER BLADE SPECIFICATIONS

PRECLEANER BLADE SPECIFICATIONS

SECONDARY CLEANER SPECIFICATION CHART

SECONDARY CLEANER SPECIFICATION CHART (cont.)

SECONDARY CLEANER BLADE SPECIFICATIONS

U.S. Patent No. D482,508S

www.flexco.com • phone: 56-2-2896-2870 11

EZP1T Precleaner with Twist Tensioner

EZP1T Precleaner with Twist Tensioner Blade Width

U.S. Patent No. D482,508S

ConShear™ High Temp Precleaners

Belt Width Minus 2" (50mm)

www.flexco.com • phone: 56-2-2896-2870 13

EZP1 Precleaner - Mild Steel

U.S. Patent No. D482,508S

www.flexco.com • phone: 56-2-2896-2870 15

Clearance Guidelines for

Spring Length Chart

U.S. Patent No. D482,508S

Pole Location Pole Location

U.S. Patent No. D482,508S

www.flexco.com • phone: 56-2-2896-2870 17

Replacement Parts Optional Spring Tensioner & Parts

U.S. Patent No. D482,508S

U.S. Patent No. D482,508S

www.flexco.com • phone: 56-2-2896-2870 19

EZP1 Stainless Steel Precleaner

U.S. Patent No. D482,508S

Blade Width Selection

www.flexco.com • phone: 56-2-2896-2870 21

Pole Length Specifications

Spring Tensioner Selection Chart

U.S. Patent No. D482,508S

www.flexco.com • phone: 56-2-2896-2870 23

EZP-LS High-Temp Precleaner

U.S. Patent No. D482,508S (blade)

www.flexco.com • phone: 56-2-2896-2870 25

Blade Width Selection

www.flexco.com • phone: 56-2-2896-2870 27

Detail view of Item 6

Replacement Parts For Arch/Gordon Mini-Saber Blades

5a Tension Spring - White (1 ea.)

5b Tension Spring - Silver (1 ea.) LS-SS 77118 .3

EZP-LS Stainless Steel Precleaner

EZP-LS Stainless Steel Precleaner Blade Width