flexoTHERM

Intelligent Heat Pump Technical Specification

• The flexoTHERM intelligent heat pump is available in 5, 8, 11, 15 and 19kW models
• Connects to three different sources - ground, water or air
• The quietest heat pump range in the UK with Sound Safe System
• Internet ready with remote monitoring available
• Green iQ for the highest energy efficiency

This information has been taken from our technical brochure, which is available from our web site
 flexoTHERM exclusive technical specification sheet

Electrical data VWF 57/4 VWF 87/4 VWF 117/4 VWF 157/4 VWF 197/4
230V 230V 230V
Nominal voltage / rated voltage
- heating circuit / compressor V / Hz 1~/N/PE 230 / 50 2~/PE 230 / 50 3~/N/PE 400 / 50
- auxiliary heating V / Hz 1~/N/PE 230 / 50 2~/PE 230 / 50 3~/N/PE 400 / 50
Power factor cos φ = 0.75 – 0.9
Required network impedance Zmax with
Ω ≤ 0.472
inrush current limiter
Fuse type, caracteristic C, delay, three-
Designing in accordance with the selected
pole switching (interrupt of the three A 32
connection diagrams
power lines in one switching operation)
Optional building earth leakage circuit RCCB type A (type A pulse current sensitive residual-current circuit breakers) or
breaker RCCB type B (type B universal current sensitive residual-current circuit breakers)
Inrush currents - with initial current
A ≤ 15 ≤ 19 ≤ 60 ≤ 26 ≤ 30
limiter
Rated current (compressor + auxiliary
A 11.9 19.1 24.9 26.1 31.2
heater)
min. electrical power consumption of
kW 1.40 2.10 2.60 3.30 4.70
compressor
max. electrical power consumption of
kW 2.10 3.10 4.10 15.60 17.80
compressor
Protection class IP 10B
Hydraulic connection
Heating flow / return G 1 1/2”
Heat source flow / return G 1 1/2”
Central heating water expansion vessel G 3/4”
Heat source circuit / brine circuit
Volume of the brine circuit in the heat
l 2.5 3.1 3.6 4.5 5.3
pump
Materials of the brine circuit in the heat
Cu, CuZn-Alloy, Stainless Steel, EPDM, Brass, Fe
pump
min. pressure Brine liquid MPa (bar) ≥ 0,07 (≥ 0,7)
max. pressure Brine liquid MPa (bar) ≤ 0,3 (≤ 3 )
Heating circuit / building circuit
Water volume of the heating circuit in
l 3.2 3.9 4.4 5.8 6.5
the heat pump
Materials of the heating circuit Cu, CuZn-Alloy, Stainless Steel, EPDM, Brass, Fe
min. pressure MPa (bar) ≥ 0,07 (≥ 0,7)
max. pressure MPa (bar) ≤ 0,3 (≤ 3 )
min. flow temperature heating °C 25
max. flow temperature heating with
°C 65
compressor
min. flow temperature cooling °C 5
max. electrical power heating circuit
W 63 140
pump
Type of pump High efficiency
Refrigerant circuit
Refrigerant type R 410 A
Volume of refrigerant circuit in the heat
kg 1.50 2.40 2.50 3.05 3.95
pump
Global warming potential in accordance
2088
with (EU) No. 517/2014
CO2 equivalent t 3132 5011 5220 6368 8248
Global warming potential 100 (GWP100)
1975 1774
in accordance with (EU) No. 842/2006
Type expansion valve Electronic
Permissable pressure (relative) ≤ 4,6 (≤ 46,0)
Electrical data VWF 57/4 VWF 87/4 VWF 117/4 VWF 157/4 VWF 197/4
230V 230V 230V
Compressor type EVI Scroll
Oil type Ester (EMKARATE RL32-3 MAF)
Oil filling quantity 0.74 1.25 1.24 1.89

Heat source circuit / brine circuit

min. resource input temperature (Brine
°C -10
warm) when heating
max. resource input temperature (Brine
°C 25
warm) when heating
min. resource input temperature (Brine
°C 0
warm) when cooling
Nominal flow rate ΔT 3K at B0/W35 l/h 1300 2110 2870 3590 4780
min. flow rate during continuous
l/h 1190 1990 2570 3380 4300
operation at the application limits
max. flow rate during continuous
l/h 1300 2110 2870 3590 4780
operation at the application limits
max. rest pressure head ΔT 3K at B0W35 mbar 0.630 0.410 0.550 0.980 0.820
Electrical power for brine pump at B0/
W35 ΔT 3K at 250 mbar Pressure drop W 49 78 80 83 121
in the external source circuit
Kind of Brine Ethylene glycol 30 % vol.
Heating circuit
Nominal flow rate ΔT 5K l/h 930 1450 1930 2450 3320
Rest pressure head ΔT 5K bar 0.650 0.440 0.30 0.730 0.450
Nominal flow rate ΔT 8K l/h 600 930 1290 1600 2180
Max. remaining feed head with ΔT 8K bar 0.680 0.650 0.540 0.860 0.800
min. flow rate at continuous working on l/h
710 1120 1510 1600 2180
the limitation of use
max. flow rate at continuous working on l/h
1025 1730 2270 2450 3320
the limitation of use
Electrical power heating circuit pump
for B0/W35 ΔT 5K at 250 mbar Pressure W 24 37 49 60 74
drop in the external heating circuit
Performance data
B0W35 Δt5K -> EN 14511
Heating power kW 5.40 8.40 11.50 14.50 19.70
Power consumption kW 1.40 2.10 2.80 3.40 4.70
COP 4.50 4.40 4.60 4.90 4.70
B0W45 Δt5K -> EN 14511
Heating power kW 5.30 8.50 11.40 14.10 19.60
Power consumption kW 1.70 2.60 3.50 4.20 5.80
COP 3.50 3.50 3.50 3.80 3.70
B0W55 Δt8K -> EN 14511
Heating power kW 5.40 8.70 11.70 14.70 20.00
Power consumption kW 2.00 3.10 4.10 5.00 6.60
COP 2.90 3.00 3.10 3.20
ErP - Data heating mode
Label 35 A++
Label 55 A++
Sound power level indoors (LWI) dB(A) 43.8 45.6 48.5 49.9 48.4
 MCS SCoP Performance Table

flexoTHERM Ground Source Heat Pump 35oC 40oC 45oC 50oC 55oC
flexoTHERM 5kW 230v 4.90 4.17 3.85 3.51 3.57
flexoTHERM 8kW 230v 4.67 4.12 3.78 3.50 3.63
flexoTHERM 11kW 230v 4.99 4.23 3.87 3.60 3.73
flexoTHERM 15kW 415v 5.39 4.61 4.23 3.89 3.74
flexoTHERM 19kW 415v 5.07 4.36 4.05 3.76 3.68

flexoTHERM with floCOLLECT water source 35oC 40oC 45oC 50oC 55oC
flexoTHERM 5kW 230v 4.94 4.41 4.02 3.87 3.87
flexoTHERM 8kW 230v 5.2 4.6 4.16 3.98 3.95
flexoTHERM 11kW 230v 5.22 4.63 4.19 4.03 4.02
flexoTHERM 15kW 415v 5.91 5.2 4.64 4.42 4.34
flexoTHERM 19kW 415v 5.63 4.97 4.46 4.27 4.23

flexoTHERM with aroCOLLECT (air source) 35oC 40oC 45oC 50oC 55oC
flexoTHERM 15kW 415v 4.51 3.91 3.46 3.37 3.42
flexoTHERM 19kW 415v 4.08 3.57 3.21 3.16 3.27