0% found this document useful (0 votes)
310 views7 pages

Zatka Machine

Uploaded by

mokshk365
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
310 views7 pages

Zatka Machine

Uploaded by

mokshk365
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Introduction:

We Pokal embedded system manufacture of electric Fenceing sock system. we establish since
2011 it self. now we have head office in Rajkot in Ahmadabad and shortly in gir district. here the
quotation is given.

Quotation table:-
Sq.no. product capacity Coast(rupees)
1. Fenceing sock with 4000 feet 2500
500watt (without
solar)
2. Fenceing sock with 5000 feet 4000
10000watt(without
Solar with battery)
3. Fenceing sock with 5000 feet 6000
11000v (with solar with 8
hour)
4. Fenceing sock with 5000 feet 7000
11000v (with battery
back up 12 HOUR)
11000v (solar with battery
5. back up 8 HOUR) 5000 feet 5000

If you want to see video then you tube link is given below.

1) https://www.youtube.com/watch?v=0XdQeoVCADk

For more information go to our website.

Website reference

1) http://yagnikpokar.weebly.com
2) http://pokalembeddedsystem.weebly.com
3) http://www.indiamart.com/pokal-electronics/

_
.

Regard;
Pokal embedded system;
[email protected]
For Four wire Fencing configuration

Or
For two wire fenceing use given below configuration

1> give 230 vac and make switch on.


2> If led is blink then connect red and black wire.
3> Your device is redy to use.
4> If led is not blink then check the line voltage is 230vac.if its more or less do not
connect line voltage to machine. after some time when voltage is near about
230vac then again attach device with line.
5> Do not shot red and black wire else alarm is ringing. at these time it takes
maximum power nearly about 25watt power.
6> On stand by use of machine it takes 1to 5watt power.
7> Use insulation at all pole for better result and long life of fencing.
8> Insulation make machine to run at low power.
9> When alarm ring off the fencing in 30 second. if oject is still getting sock.
otherwise fuse and diode burn. so replace these and restart again.
10> You can use 1n4007 diode for replacement. or similar diodes.
11> If alarm is ring without any object detect then buyer need to use more
insulation in fencing wire and poles.

Instructions For OEM parts only:-

1> OEM parts not contain any guarantees also with proper knowledge of field
required to join all the parts.we are not responsible for anykind of hazardes if
buyer assembled its own machine by oem parts.
2> Prise list for OEM is different then ordinary and contact for oem parts. Mo:-
9925020032.
3> We are provide circuit diagram for OEM. Also all the parts. but we are not
responsible if there is misuse of the parts.

4> Battery and solar wire are given on pcb as a battery + ,battery -,solar+,solar-.
5> Use of solar mppt charger make batterys long life.
6> For OEM parts courier charges may also be apply in according to location to be
shipping.

Quotation table for oem parts:-


Sq.no. product capacity Coast(rupees)
1.
Fenceing circuit 25 watt 500

2. 200
Low frequency
transformer 12v 2amp

High frequency
3. transformer 2.5kv 500

4. Casing or body 20*15*20 cm 500

Other accessories and wire


Banana connectors and
powerplug. 400
5.

How to attach external battery and solar in machine.


There are 4 terminal in a pcb.
1> Solar+ and solar – for solar.
2> Battery+ and battery – for battery.
3> Battery may be 7 ah, 12ah ,35ah etc.
4> Use of MPPT charger or pwm charger may cause advanced protection in solar.
also efficiency increased.
5> Without the instruction of technician do not do experiment in pcb or high voltage
transformer for any kind of hazards we are not responsible for these.

How to mount insulator in fenceing pole.

1> By the use of insulator on the fenceing pole user can make machine life long as
well as more area covering capacity.
Here some of the example of the insulators are given>
Replace diode if alarm if ringing more then 10 minute and fencing time is change.

You might also like