Solution For Solar Energ-Solar Catalog

—
C ATA LO G
Solutions for solar energy

Low- and medium-voltage
components, systems and services
START
—
Providing sustainable solutions
for renewables
ABB is a world leading supplier of innovative technologies for

renewables with a comprehensive range of solutions for solar,
wind, Energy Storage Systems and EV charging
As renewables and digitalization enable fundamental changes in how we generate,

distribute and consume energy, the only certainty is that new technologies are going to
challenge our conceptions of what’s possible. ABB is a pioneering leader in that
technological innovation and we also actively innovate energy solutions that deliver value
to customers in this dynamic environment. 1
1 3
Solar
2
Wind
3
Energy Storage System
2
4
EV charging
START
BACK NEXT
—
Delivering sustainable
renewables
The challenge of using renewables in the energy mix is to

balance supply and demand.
Balancing renewables power supply and end-user’s demand has always been a challenge, but
as the renewables share of total generation in many countries is growing, this challenge is
increasing. In response to this, ABB supports its customers along the complete renewables
power value chain, from consulting, generation, balance of system, storage and connection
up to transmission, monitoring and control, as well as maintenance and optimization.
Power
generation
Monitoring Balance of
& Control System (BoS)
We understand the complexity of implementing solutions that are both sustainable and future-proof.
Power Energy storage

transmission
Connection Consulting Design Maintenance Optimization
START
BACK NEXT
—
Digitalization for renewables
through ABB Ability™
ABB Ability™ is our unified, cross-industry digital solution, giving
you the ability to know more, do more, do better, together. Automation and Service and asset
ABB Ability™ is built on a state of- the-art hardware and software digitalization management
architecture for data collection, processing and storage, which has been
developed together with Microsoft in order to enhance performance and
guarantee the highest reliability and security.
Power management, data integration, Predictive analytics,

substation control and protection, remote monitoring and support,
condition and performance backup management.
monitoring, loop control. ABB Ability™
Monitor Optimize Control

Discover plant performance, Schedule and analyze Set up alerts, notify
supervise the electrical automatic reports, key personnel and
system and allocate costs. improve the use of assets remotely implement
and take the right an effective power
business decision. management strategy.
Residential Commercial Utility
Our leading integrated and collaborative digital solutions build on our knowledge and
expertise in renewables, which contributes to:
• Maximized service continuity through smart • Reduction of more than 60% of installed
algorithms, even in an emergency components for the same function
• Savings of up to 30% on operational costs • Switchgear footprint reduction of up to 50%
DC AC Other Power Grid
through energy management system by embedding logics
products collection connection
START
BACK NEXT
—
Benefits and advantages
for photovoltaic
Systems, products and solutions answering customers needs and market trends.
ABB portfolio for photovoltaic applications focus on delivering continuous operation,
higher reliability and return on investments, enabling customers to take full advantage
of savings by adopting 1500V DC and 800V AC technologies.
— — — — — —
Reduced costs and resources Energy efficiency Reliable in extreme conditions Continuous operation Global availability Speed up your projects
Challenge/trend Hidden costs are Challenge/trend The demand for lower Challenge/trend Solar plants are Challenge/trend Keeping priority loads Challenge/trend Having the ability to Challenge/trend An optimized
typically neglected, but they solar energy cost and higher efficiency commonly located in high temperature running during an utility outage is streamline operations and serve manufacturing operation can provide
significantly impact any business. have pushed higher voltages and more environments or at high altitudes, crucial for business continuity. multiple markets are survival factors in that extra advantage needed to secure
energy efficient equipment: requiring equipment that can work such a competitive market. projects.
ABB answer Simplified bidding and 800V AC: properly under harsh conditions: ABB answer ABB’s power manager
negotiation costs with one single 14% savings in transformer up to 70°C or 5000 m altitude. capabilities allow continuous operation ABB answer ABB’s multi-listed ABB answer ABB’s factory accessorized
supplier thanks to ABB’s complete copper windings of critical loads when an outage (eg.: IEC/UL/CCC and more) products products and easy-to-install
sun-to-socket offering can save up to 1500V DC: ABB answer ABB’s offering is designed happens in the utility side and and systems allow customers to export accessories save up to 15% in
50% in time. 35% savings on arrays in parallel taking into account the specific renewables are present. one single design virtually anywhere in installation and commissioning time.
33% savings on array components. application requirements to deliver the the world.
most reliable solution with high
ABB answer ABB’s complete offering performance without deratings
helps increase the “Electrical Balance of the main characteristics:
of System” efficiency related to power up to 55°C or 4000 m altitude.
losses by up to 35%, allowing more
power to be delivered to the consumer.
START
BACK NEXT
—
Solar power
ABB has been a leading player in the solar power industry

since the early 1990s
Since then, we have been involved at a pioneering stage in just about every type of
photovoltaic (PV) and concentrating solar power (CSP) technology developed worldwide.
This gave us a unique expertise in how best to harness, control and store solar energy and
efficiently convert it into a reliable power source, ready for transfer into the local grid.
ABB’s portfolio of products, systems and solutions for the solar power industry is extensive.
It ranges from complete power and automation solutions for utilities to commercial,
industrial and residential rooftop photovoltaic installations.
1 DC
2 AC
3 Power collection
Furthermore, to check ABB capabilities

and competences about PV applications,
4 Grid connection scan this QR code and download the Technical
Application Paper "Photovoltaic plants".
START
BACK NEXT
—
Application overview
Residential system ≤20kW LV
5 UTF-certified
measurement group
1 for produced energy
Id kWh Id kWh
ID
Energy meter at
connection point
2 3 4 6 7 8 9 10
Low-voltage products:
1. String boxes 5. Energy meters: EQmeters and current transformers
Switchboards: Gemini 6. Grid feeding monitoring relays: CM-UFD.MxxM
Consumer units: MISTRAL65H Contactors AC-3: AF Series
Circuit-Breakers: S200 M UC Z, S800 PV-SP Power supplies and buffers: CP-C.1 e CP-B
Fuse disconnectors: E 90 PV 7. Fuse disconnectors: E 90
Fuses: E 9F PV 8. Surge protective devices: OVR T1 / T1-T2 / T2 QS
2. Switch-disconnectors: OTDC, S800 PV-SD 9. Residual Current Circuit-Breakers: DS202C
3. Surge protection devices: OVR PV 10. Arc fault detection device (AFDD) with integrated
4. Residual current devices: F202, F204 residual current Circuit-Breaker with overcurrent protection (RCBO): DS-ARC1
START
BACK NEXT
RESIDENTIAL COMMERCIAL / INDUSTRIAL UTILITY
DC AC OTHER PRODUCTS
—
Protection and safety
MISTRAL65H E90 PV Fuse Holders and fuses OVR PV High-performance string protection
Strong, resistant and with a modern The E90 PV fuse holders have been Surge Protective Devices are now well MCB S800PV-SP
look, MISTRAL65H is the most specifically designed for photovoltaic integrated in the solar system to The High-Performance MCB S800PV-SP,
innovative series of IP65 rated applications. Thanks to their rated protect DC and AC sides with the aim specially developed for photovoltaic
consumer units, designed to reduce voltage up to 1500V DC, they are to provide continuity of service and systems, offers reliable protection for
cabling times as well as allow total perfect for protection of strings in PV reduce risk of fire, protecting from PV modules and lines against reverse
integration between modular DIN-rail applications. Their compact size is overvoltages due to lightning strikes or currents from defective strings and AC
and front panel devices. Thanks to the perfect for installation in a string network disturbances. We designed the regenerative feedback due to defective
elegant design, MISTRAL65H can be combiner box or in an inverter. OVR PV to improve performance and inverters. The high demands of PV
installed in residential environments E90 PV can be used in combination protect any photovoltaic system systems have been considered a
where high level of IP protection is with E9F PV cylindrical fuses for 1000 according to IEC 61643-31 Standard. priority in the development of the
required. or 1500V DC. For more information visit: link S800PV-SP.
For more information visit: link For more information visit: link For more information visit: link
START
BACK NEXT
—
Switch and disconnection
High-performance High-performance polarized OTDC switches from 16 to 32 Amperes

switch-disconnector MCB S800PV-SD disconnector MCB S800PV-M-H High performance and energy efficiency:
With highly compact design for This disconnector might be small, OTDC has very low power losses and is
installation on the DIN rail, the but it's a giant when it comes to suitable for applications in high ambient
S800PV-SD switch-disconnector offers performance. With a nominal current temperatures. The rated currents need no
relevant safety isolation properties. range up to 100A, it covers a large derating even beyond 60°C (140 °F).
As master switch for PV systems, the range of applications. At the same Save installation space, time and cost:
whole DC side can thus be safely time, the compact S802PV-M-H is OTDC switches offer various DC voltage
isolated, locally or from remote. only 54 mm wide. As a result, space ratings up to 1000 V DC and a control of up
For more information visit: link requirement is minimal. to three circuits within the same footprint
For more information visit: link area. Three mounting options are available:
door, base and DIN rail.
For more information visit: link
START
BACK NEXT
—
Metering, monitoring and installation
CMS-660 - Solar string monitoring Insulation monitoring relays Conduit & fittings Metal framing & support systems
How can you detect impairments such The insulation monitoring relays An electrical system is as reliable as its ABB saves time and labor with its
as leaves and dirt or even broken cables CM-IWM-10 and CM-IWM.11 guarantee a conductors and conduit systems & comprehensive lines of metal framing
without great effort? continuous insulation monitoring of an fittings, which provide unsurpassed and cable tray, including the industry’s
CMS-660 is a solar monitoring system IT system. The devices recognize protection and insulation for wires and only 100% plated products, our 1 1/2"
that remotely checks the DC current insulation faults as they develop and cables in any demanding applications: modular system and hundreds of
produced by each string, allowing to trip immediately if the value falls below power generation and solar panels. accessories to complete any job.
compare it not only with its previous the minimum set threshold. For more information visit: link For more information visit: link
performance but also with the This ensures a reliable operation of the
performance of other strings. system and prevents operational
CMS allows detection of over-voltages, interruption caused by a second, more
breaker trips or high temperatures. severe, insulation fault which may lead
For more information visit: link to a short-circuit trip of the main
circuit-breaker.
START
BACK NEXT
—
Residual current devices - RCDs OVR QuickSafe® E90 DS-ARC1

Residual current devices protect people QuickSafe is our new generation of Fuse switch-disconnectors A reliable protection against series and
from life-threatening indirect contacts Surge Protective Devices (SPD) with The E 90 fuse switch-disconnectors parallel arc faults, the DS-ARC1 arc fault
according to IEC/EN 61008 or improved performance. Thanks to range for cylindrical fuses 8x31mm, detection devices offer an additional
IEC/EN 61009 Standards. ABB offers a innovative technology this new range 10x38mm, 14x51mm and 22x58mm, is magnetothermic and differential
comprehensive range of devices like of SPDs covers residential and specifically designed to provide protection. They can be supplied either
RCCBs, RCBOs, RCD-blocks, Earth industrial applications with an protection against short-circuits and top or bottom and are equipped with
Leakage Relays DIN-Rail and front extremely good protection level, simple overloads. It is available in a complete convenient functions like led
panels in order to cope with all the installation and preventive range from 1 to 4 poles and provides monitoring, contact position
applications in residential, commercial maintenance. All according to disconnection properties according indication, check button and autotest.
and industrial segments. IEC/EN 61643-11 Standard. to IEC 60947-3 Standard. For more information visit: link
START
BACK NEXT
—
Miniature circuit-breakers - MCBs Molded case circuit-breakers

Miniature circuit-breakers ensure SACE Tmax XT
electrical safety in multiple The SACE Tmax XT series of Molded
applications. They have two different Case Circuit-Breakers (MCCBs) are
tripping mechanisms, the delayed designed to maximize ease of use,
thermal tripping mechanism for integration and connectivity while
overload protection and the magnetic reliably delivering safety and quality.
tripping mechanism for short-circuit Rather than just offering standalone
protection. protection, they are seen as key
For more information visit: link elements of the system that give you
complete flexibility, extreme breaking
capabilities and reliable performance
under pressure.
START
BACK NEXT
—
Switch-disconnectors SD 200 SACE Tmax XT switch-disconnectors EasyLine - XLP

SD 200 switc-disconnectors can be SACE Tmax XT switch-disconnectors fuse switch-disconnectors
used as the main switch of the AC side are devices created from the EasyLine range of fuse switch-
of the inverters. The devices are corresponding circuit-breakers and disconnectors ensures high protection
mounted on a DIN rail or on the rear feature the same overall dimensions and reliable operation in critical power
panel of a switchboard (depending on and versions, and can be fitted with applications, distribution boards,
the rated current) and include a wide the same accessories. switchboards, capacitor banks.
range of accessories, facilitating their For more information visit: link For more information visit: link
use in various applications.
START
BACK NEXT
—
Manual operated switch fuses Switch-disconnectors

Our OS range includes manual operated 16 to 4000A
switch fuses from 20 to 1250A, Reliable in extreme conditions,
available for all types of fuses: DIN, BS, ABB switch-disconnectors are designed,
NFC, CC, JJ and L types. built and tested for the best possible
For more information visit: link performance. They are designed to be
virtually maintenance-free across their
entire extended lifespan and offer reliable
performance in any circumstances.
Durability has been ensured by testing
switches against the IEC60947- 3, UL508,
UL98 and CSA Standards.
START
BACK NEXT
—
Energy Meters Circuit Measurement Systems Grid feeding monitoring relays System pro E comfort MISTRAL
Energy consumption awareness is key With the rise of digitalization and the CM-UFD ABB's series of consumer units combine
to reduce energy costs and improve Internet of Things (IoT), data collection ABB’s CM-UFD range are multi- versatility and performance with an
energy efficiency on your machines from the entire network for analysis functional grid feeding monitoring elegant design, reducing installation
and electrical assets. Energy meters becomes easier, enabling optimization relays, installed between the renewable time while integrating several kinds of
allow to identify areas for of energy usage and assets. energy system and the public grid. devices for DIN-rail and devices to be
improvement and to generate From monitoring energy consumption They detect unusual events in the installed on mounting plate or on blind
benefits for owners, facility managers to control of operations and costs, public power grid and automatically front panels. With the wide range of sizes
and users. They enable to run smarter connectivity-based solutions can disconnect and reconnect the and versions, ABB’s consumer units are
buildings in a more energy and cost improve energy efficiency while renewable power plant. one of the most complete ranges on the
efficient way. reducing costs. For more information visit: link market, providing a smarter space for all
For more information visit: link For more information visit: link your installation ideas.
START
BACK NEXT
Ty-Rap high performance cable ties Wire termination & connectors External Lightning Protection - OPR Kindorf Hold Down Clamps and
Innovative design and engineered ABB is a recognized leader in providing To provide effective protection, the Ty-rap cable edge solar clips
materials make Ty-Rap® cable ties the electrical connectors suitable for the Solar system must be protected Easy and durable corrosive resistant
perfect fastening solution where majority of all electrical applications. against direct lightning strikes and solution for solar panel installation
performance really matters. For more information visit: link have a proper grounding system in and wires and cables management.
Often imitated but never equaled, addition to protection against To be used with all brands of panels,
Ty-Rap® cable ties provide superior overvoltage on both sides of the different strut materials and all types
performance in any application. inverter. OPR, ESE lightning rod is an of solar wires.
For more information visit: link active system that protects against
For more information visit: link and link
direct lightning.
START
BACK NEXT
—
Commercial system 20-1000 kW LV/MV
2 3 9 5 8 13 14 15 14
1
Loads
10 11 16
7
Id kWh Id kWh
ID
8 5 12 17 18 B C
A
kWh
6 Low-voltage products:
1. String combiners 1000V DC 15. Contactors: AF Contactor Series
Switchboards: Gemini; Consumer units: MISTRAL65H, Gemini Grid-feeding monitoring relays: CM-UFD.MxxM
2. Fuse disconnectors: E 90 PV; Fuses: E 9F PV Power supplies: CP-x
kWh
3. Switch-disconnectors: OTDC; S800 PV-SD 16. Energy meters: EQ meters and current transformers ID ID+GPD
4. Current measurement system: CMS; Power supplies: CP-x 17. Surge protective devices: OVR T1 / T1-T2 / T2 QS
5. Surge protection devices: OVR PV 18. Fuse disconnector: E 90
6. String monitoring controller 19. Interface protection CEI 0-16 on LV side: Ekip UP
7. Recombiner 20. Temperature monitoring relay: CM-TCN.012
8. Miniature Circuit-Breakers: S200 M UC Z, S800 PV-SP Loads
4 5 9. Switch-disconnectors: Tmax PV, OTDC series Medium-voltage products: 19 20 D
10. Contactors: GAF Series A. Modular Systems: Compact Secondary Substation,
11. Insulation monitoring devices: CM-IWx Secondary Skid Unit, Secondary Enclosed Unit
12. GFDI Application: S804U-PVS5 B. Transformers: Dry-type transformers,
13. Residual current devices: F202, F204 oil-immersed transformers
14. Residual current blocks: DDA200 C. Gas-insulated secondary switchgear: SafeRing / Safeplus
Residual current Circuit-Breakers: F200 Air-insulated secondary switchgear: UniSec
Miniature Circuit-Breakers: S 200 Air-insulated switch-disconnector: NALF
Moulded Case Circuit-Breakers: Tmax XT, Tmax T, Recloser: Gridshield®
Tmax XT RCD Circuit-Breaker: VD4
D. Interface protection system: ABB Relion® Family
START
BACK NEXT
DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS
—
String combiner boxes GEMINI E90 PV Fuse Holders and fuses OVR PV High-performance string protection
In a photovoltaic system, the modules The E90 PV fuse holders have been Surge Protective Devices are now well MCB S800PV-SP
are arranged in strings and arrays specifically designed for photovoltaic integrated in the solar system to The High-Performance MCB S800PV-SP,
depending on the type of inverter used, applications. Thanks to their rated protect DC and AC sides with the aim specially developed for photovoltaic
the total power and the technical voltage up to 1500V DC, they are to provide continuity of service and systems, offers reliable protection for
characteristics of the modules. ABB perfect for protection of strings in PV reduce risk of fire, protecting from PV modules and lines against reverse
offers a complete range of all-in-one applications. Their compact size is overvoltages due to lightning strikes or currents from defective strings and AC
combiner boxes hosting string optimal for installation in a string network disturbances. We designed the regenerative feedback due to defective
protection devices, disconnectors and combiner box or in an inverter. OVR PV to improve performance and inverters. The high demands of PV
surge protective devices (SPDs). E90 PV can be used in combination protect any photovoltaic system systems have been considered a
It is possible to add also monitoring with E9F PV cylindrical fuses for 1000 according to IEC 61643-31 Standard. priority in the development of the
devices. or 1500V DC. For more information visit: link S800PV-SP.
START
BACK NEXT
—
SACE Tmax T - PV DC switch-disconnectors 16...1600 A High-performance

The SACE Tmax PV range of The OTDC range of switch- switch-disconnector MCB S800PV-SD
molded-case circuit-breakers and switch- disconnectors from 16 to 1600A is With highly compact design for
disconnectors for IEC and UL applications specially designed for DC applications. installation on the DIN rail, the
on both the DC and AC sides of a Thanks to compact design, efficiency S800PV-SD switch-disconnector offers
photovoltaic plant, expands the widely and reliability, they bring PV installations relevant safety isolation properties.
appreciated ability of the SACE Tmax T to the next level. The versatile OTDC As master switch for PV systems, the
range to provide the most adaptable and portfolio includes solutions for whole DC side can thus be safely
versatile solution for every type of installations with the most special isolated, locally or from remote.
application. The aim is to enhance energy requirements: 1500 V DC voltages, For more information visit: link
efficiency and limit the rated currents multi-circuit switching and combined
involved, thereby reducing switchgear size, load outputs up to 1600 A.
installation time and costs. For more information visit: link
START
BACK NEXT
—
circuit-breaker.
START
BACK NEXT
—
OVR QuickSafe® E90 50A/125A Miniature circuit-breakers - MCBs Residual current devices - RCDs
QuickSafe is our new generation of Fuse switch-disconnectors Miniature circuit-breakers ensure Residual current devices protect people
Surge Protective Devices (SPD) with The E 90 50A/125A fuse switch- electrical safety in multiple from life-threatening indirect contacts
improved performance. Thanks to disconnectors range for cylindrical applications. They have two different according to IEC/EN 61008 or
innovative technology this new range fuses 14x51mm and 22x58mm, is tripping mechanisms, the delayed IEC/EN 61009 Standards. ABB offers a
of SPDs covers residential and specifically designed to provide thermal tripping mechanism for comprehensive range of devices like
industrial applications with an protection against short-circuits and overload protection and the magnetic RCCBs, RCBOs, RCD-blocks, Earth
extremely good protection level, simple overloads. It is available in a complete tripping mechanism for short-circuit Leakage Relays DIN-Rail and front
installation and preventive range from 1 to 4 poles and provides protection. panels in order to cope with all the
maintenance. All according to disconnection properties according For more information visit: link applications in residential, commercial
IEC/EN 61643-11 Standard. to IEC 60947-3 Standard. and industrial segments.
START
BACK NEXT
—
Molded case circuit-breakers SACE Emax 2 Ekip UP

SACE Tmax XT SACE Emax 2 all-in-one is the first circuit- Ekip UP is a digital unit that can perform different functions.
The SACE Tmax XT series of Molded breaker that matches new grid requirements. Thanks to its 5 versions, it solves needs ranging from measurement to
Case Circuit-Breakers (MCCBs) are It enables a direct communication to the new protection, up to automatic logics. In addition, it is IEC 60255 certified.
designed to maximize ease of use, energy management cloud-computing Ekip UP can monitor the energy consumption of commercial buildings
integration and connectivity while platform ABB Ability™ Electrical Distribution by connecting directly to the cloud for remote monitoring.
reliably delivering safety and quality. Control System. Smart and plug and play Ekip UP can protect distribution and generation within an industrial
Rather than just offering standalone architecture makes Emax 2 all-in-one easy to plant by directly controlling switches. Ekip UP offers pre-programmed
protection, they are seen as key use. Leveraging also unmatched electrical switching logics without the use of PLCs.
elements of the system that give you performances, Emax 2 sets a new circuit- Ekip UP offers advanced protections for entire urban micro-grids
complete flexibility, extreme breaking breaker benchmark for the needs of today or islanded microgrids, facilitating the exchange from various energy
capabilities and reliable performance and tomorrow. sources, from solar inverters to diesel generators.
under pressure. For more information visit: link For more information visit: link
START
BACK NEXT
—
Protection and switch
Switches InLine II - Fuse switch-disconnectors SACE Tmax T4V-HA, T5V-HA and T5X-HA
The switch family consists of a complete range InLine II is a technically reliable and proven solution SACE Tmax PV can be used in plants with voltage
of switch-disconnectors, switch fuses, change- for demanding conditions. A wide range of devices up to 800V AC and do not require derating in
over switches, automatic transfer switches, with 800-1000V AC ratings up to 120kA is available voltages and breaking capacity up to 4000m.
bypass switches, cam switches and fuses. to support the higher voltage architectures in solar SACE Tmax PV T4V-HA, T5X-HA and T5V-HA
ABB’s switches are designed for flexibility and power plants. With a wide range of accessories and circuit-breakers for AC applications are available
reliable performance in a wide variety of cable terminal connections, InLine II guarantees the in UL, IEC 60947-2 and GB14048.2 versions. The
applications: power distribution for residential highest amount of safety and stability. T4V-HA bearing the three UL, IEC and CCC marks
and industrial buildings, HVAC, water pumping For voltages up to 880V AC, an Electronic Fuse and T5V-HA bearing both the IEC and UL marks,
stations, data centers and photovoltaic Monitoring is available as accessory. while T5X-HA fulfils the UL 489 requirements.
installations. For more information visit: link For more information visit: link
START
BACK NEXT
—
SlimLine XRG AF contactors

SlimLine XRG range offer exceptional energy AF contactors with standard AF technology
efficiency, reducing the increase in temperature define a new benchmark. The electronically
and thus increasing performance inside the controlled coil offers numerous advantages over
switchboard. Thanks to the plug in contacts, competitors, optimized logistics and lower
installation is quick and easy. The advanced ITS2 management costs thanks to few product
management and measurement module facilitates variations. The 80% reduction in the coil electrical
the connection to control systems and remote consumption allows energy savings. AF technology
monitoring. allows you to overcome drops and falls of voltage.
For more information visit: link Main features: up to 1000 A, 690 V AC-1 and 540 A,
600 V for general use, integrated overvoltage
charger and mirror contacts mechanically
connected.
START
BACK NEXT
—
Grid connection (Low Voltage)
Temperature monitoring relays Grid feeding monitoring Ekip UP CEI 0-16 UPS PowerValue 11T G2 CEI - 016
The temperature monitoring relay CM-TCN relays CM-UFD (Interface Protection System) UPS PowerValue 11T G2 CEI - 016 is a
measures temperatures of solids, liquids ABB’s CM-UFD range are multi- Ekip UP performs the functions of SPI relay single-phase, double conversion
and gaseous media within up to three functional grid feeding monitoring for the active systems connected to the MV uninterruptible power supply (VFI) which
sensor circuits using different types of relays, installed between the distribution network. Complying to CEI guarantees up to 3 kW for applications
sensors, such as PT100, PT1000, PTC or NTC renewable energy system and the 0-16 Standard aligned with the European in MV / LV transformer substations com-
at the same time. The device allows different public grid. Standards EU 2016/631, EU 2016/1388 and pliant with CEI-016. The UPS guarantees
thresholds and has three output relays. Easy They detect unusual events in the EU 2016/1447. Among its 35 protections, continuity for a period of 60 minutes
to configure thanks to predefined settings public power grid and automatically the one for restricted ground fault REF maintaining a power reserve, starting
for key applications and Epic mobile App. disconnect and reconnect the (ANSI 87) can command circuit-breakers from the battery, useful for resetting the
Thanks to Modbus RTU can easily renewable power plant. both by wired signal and with advanced interface protection system (SPI) and
communicate with supervisors. For more information visit: link native communication protocols such as subsequent closing of the main switch.
IEC 61850. For more information visit: link
START
BACK NEXT
—
Energy Meters Circuit Monitoring Systems M4M ABB Ability™ Energy and Asset
Energy consumption awareness is key With the rise of digitalization and the M4M is a stand-alone network analyzer Manager (EAM)
to reduce energy costs and improve Internet of Things (IoT), data collection that responds to all the monitoring EAM is the innovative cloud
energy efficiency on your machines from the entire network for analysis needs of the energy distribution management platform developed to
and electrical assets. becomes easier, enabling optimization system: from the high-precision monitor, optimize and manage
Energy meters allow to identify areas of energy usage and assets. monitoring of the electrical parameters electrical systems. Among the main
for improvement and to generate From monitoring energy consumption of energy efficiency to the complete features, multisite management,
benefits for owners, facility managers to control of operations and costs, analysis of the energy quality using real-time alerts via email and sms,
and users. They enable to run smarter connectivity-based solutions can advanced KPIs. Thanks to the report of the stored values, digital twin
buildings in a more energy and cost improve energy efficiency while connectivity features, M4M can take of the system, predictive maintenance
efficient way. reducing costs. advantage of the integration of functions, support to ISO 50001.
For more information visit: link For more information visit: link scalable energy and asset management For more information visit: link
in ABB solutions to monitor, optimize
and control the entire electrical system.
START
BACK NEXT
—
Consumer units, enclosures and low voltage switchboards
Gemini multipurpose enclosures ARIA Polysafe System pro E power

Gemini switchboards are made through Universal polyester enclosures IP66, Polyfunctional enclosures in polyester System pro E power is an innovative
co-injection technology and ABB is the IK10, UL, CSA and Lloyd's Register IP65 / IP54, IK10, UL and CSA certified. solution for main distribution boards
first manufacturer to use it as a certified. 7 sizes from 315 x 215 x 170 14 standard sizes, from 500 x 500 mm with rated current up to 6300A and
molding technique. This process mm up to 1035 x 835 x 300 mm. up to 1250 x 1000 mm, combinable with short-circuit current up to 120kA.
obtains a compact external hard Self-extinguishing and halogen-free. each other and with a 320 mm depth Designed to easily respond to all
covering and an expanded internal soft Corrosion resistant and requires no extendable to 640 mm. Factory electrical installation requirements in
core, guaranteeing the highest level of maintenance. assembled (empty or equipped). terms of degree of protection, form of
mechanical protection against impacts segregation and electrical characteris-
For more information visit: link For more information visit: link
(IK10). Gemini keeps its mechanical tics, according to the latest interna-
characteristics in the long term. tional Standards and in perfect synergy
For more information visit: link with all ABB low voltage equipment.
START
BACK NEXT
Unipack CSS EcoFlex eHouse Secondary Skid Unit

Safe working: Modular, factory assembled and tested, with ISO dimensions: • Pre-configured design solutions
• Internal arc fault and type tested (IEC 62271-202) • Combinable modules • Factory assembled and routine tested
• Connected to SCADA • Seismic rated • One piece delivery for minimizing site works
• ABB AbilityTM enabled for maintenance and remote • C5M Coating • Efficient cooling based an open air design with
management Risk mitigation, improved lead time and reduced overall cost: no additional HVAC required
Optimized life cycle and maintenance cost: • Minimal site works • No exposed live parts
• Corrosion resistant enclosure of Glass Reinforced Polyester • Factory production • ABB AbilityTM digitally enabled solution providing predictive
Fast installation, commissioning and relocation: Transportable, configurable and standardized: maintenance and remote management
• Lightweight and factory assembled • Configurable: electrical equipment, floor/wall material, For more information visit: link
• Flexible with wide range of ratings module combinations
For more information visit: link • Reduced engineering
• Standard shipping
START
BACK NEXT
Air-insulated secondary switchgear Gas-insulated secondary switchgear ecoGIS SF6 free Gas-insulated switchgear
UniSec SafeRing/SafePlus ABB has been developing and deploying alternatives to the greenhouse gas sulfur hexafluoride (SF6)
UniSec is suitable for up to 24 kV, Compact metal enclosed switchgear on the path towards greater eco-efficiency and lower environmental impact. ABB can offer medium-
1250A, 25kA. It offers a broad portfolio for up to 40.5 kV. Unique flexibility voltage switchgear Dry Air insulation up to 12Kv and above 12kV with AirPlus™ a groundbreaking
of functional units and technical thanks to extendibility and the eco-efficient gas mixture with 99.99% lower global warming potential (GWP). ecoGIS AirPlus™ with a
features. It’s suitable for a wide range combination of fully modular and global warming potential (GWP) < 1, it is the world’s first MV SF6 free GIS up to 40,5kV which keeps
of applications including solar, semi-modular configurations. compact switchgear dimensions and all GIS advantages. AirPlus technology is introduced stepwise to
industry, substations, data centers and High level of reliability, safety and a the ZX and SafeRing/SafePlus product families – ABB’s primary and secondary distribution GIS.
smart grids. Also available as ABB virtually maintenance-free system. Benefits of AirPlus switchgear:
Ability™ UniSec Digital. Also available with AirPlus™ or Dry Air • Eco-efficient with a GWP < 1
For more information visit: link insulation gases. • ABB has the most complete SF6-free portfolio on the market, with ratings from 12 to 40.5 kV.
For more information visit: link • Same compactness as equivalent SF6 GIS portfolio
• Low pressure design assure safety and service availability in case of loss of pressure
• Retains advantages of established GIS technology
• Avoids SF6 regulations
• Used in reliable and proven switchgear products
START
BACK NEXT
Metal framing & support systems Cable protection and insulation External Lightning Protection - OPR Blackburn grounding systems
ABB saves time and labor with its ABB offers a wide range of products to To provide effective protection, the Blackburn compression, mechanical
comprehensive lines of metal framing guide, protect and insultate your wires Solar system must be protected and exothermic connectors and
and cable tray, including the industry’s and cables in your control panels and against direct lightning strikes and accessories represent the most
only 100% plated products, our 1 1/2" equipment. Our range includes braided have a proper grounding system in comprehensive set of products in the
modular system and hundreds of sleeving, extruded grommeting, addition to protection against industry for the creation of a safe, code
accessories to complete any job. heatshrink and spiral wrap. overvoltage on both sides of the compliant and reliable grounding
For more information visit: link For more information visit: link inverter. OPR, ESE lightning rod is an system.
active system that protects against
direct lightning.
START
BACK NEXT
—
Utility scale system > 1 MV MV/HV - CENTRAL INVERTERS - Low-voltage products
To next
inverter
11 16
1 2 3
4
12 15
3
9
Id
ID+GPD
6
14 13 17
8
7 10
8
ID+GPD
1. Fuse disconnectors: E 90 PV; Fuses: E 9F PV 10. Insulation monitoring devices: CM-IWx
2. Current measurement system: CMS 11. Contactors: GF and GAF series
5 3 3. Switch-disconnectors: OTDC 12. GFDI Application: S804U-PVS5
4. String combiners: 1000V DC/1500V DC 13. Fuse disconnectors: E 90
Switchboards: Gemini, Aria and Polysafe 14. Surge protection devices: OVR T1 / T1-T2 / T2 QS
5. Surge Protection Devices: OVR PV 15. Contactors: AF Series
6. String Monitoring Controller 16. Moulded Case Circuit-Breakers: Tmax XT, Tmax T
7. Recombiner Air Circuit-Breakers: Emax 2
8. Moulded Case Circuit-Breakers: Tmax PV 17. Temperature monitoring relay: CM-TCN.012
9. DC switchboards: System pro E power
START
BACK NEXT
—
Utility scale system > 1 MV MV/HV - CENTRAL INVERTERS - Medium-voltage products
To next
inverter
B F F
A E
D
Id
ID+GPD
Medium-voltage products: C
A. eHouse E. EcoFlex, eHouse, skid-mounted substation
B. Gas-insulated secondary switchgear: SafeRing / Safeplus F. Gas-insulated primary switchgear: ZX product family ID+GPD
Air-insulated secondary switchgear: UniSec Air-insulated primary switchgear: UniGear product family
Air-insulated switch-disconnector: NALF Air-insulated secondary switchgear: UniSec
Recloser: Gridshield Outdoor breakers: R-MAG® (dead tank), OVB-VBF (life tank)
Circuit-Breaker: VD4 Recloser: Gridshield
C Interface protection system: ABB Relion® Family, REG615
D. Modular Systems: Compact Secondary Substation,
Secondary Skid Unit, EcoFlex eHouse
START
BACK NEXT
—
Utility scale system > 1 MV MV/HV - STRING INVERTERS - Low-voltage products
1 1. String Combiner 10. Moulded Case Circuit-Breakers: Tmax XT
2. Molded Case Circuit-Breakers Tmax PV (e.g. T4N/PV-E) 11. Insulation monitoring devices: CM-IWx
3. Recombiner 12. Switch Fuse (up to 690V AC): OS
4 4. Fuse Switch-disconnectors: InLine II ZLBM and EasyLine XLP 13. Contactors: AF series
5. Molded Case Circuit-Breakers for AC applications 14. GFDI Application: S804U-PVS5
(e.g. T4V-HA) 15. Switch-disconnectors: OT
3 6. Switchboard 16. Fuse disconnectors: E 90
7. Molded Case Circuit-Breakers for AC applications 17. Surge protection devices: OVR T1 / T1-T2 / T2 QS
(e.g. T5V-HA) 18. Moulded Case Circuit-Breakers: Tmax XT, Tmax T
8. Switch-disconnectors Fuse: SlimLine XRG Air Circuit-Breakers: Emax 2
9. Switchboards: System pro E power 19. Temperature monitoring relay CM-TCN.012
11 12 13 15
7
6
To next
14 cabins
Id
ID+GPD
2 5
17 16
10 18 19
ID+GPD
START
BACK NEXT
—
Utility scale system > 1 MV MV/HV - STRING INVERTERS - Medium-voltage products
Medium-voltage products:
A. Modular Systems: Compact Secondary Substation, E. Gas-insulated primary switchgear: ZX product family
Secondary Skid Unit, EcoFlex eHouse Air-insulated primary switchgear: UniGear product family
B. Gas-insulated secondary switchgear: SafeRing / Safeplus Air-insulated secondary switchgear: UniSec
Air-insulated secondary switchgear: UniSec Outdoor breakers: R-MAG® (dead tank), OVB-VBF (life tank)
Air-insulated switch-disconnector: NALF Recloser: Gridshield
Recloser: Gridshield
Circuit-Breaker: VD4
C Interface protection system: ABB Relion® Family, REG615
D. EcoFlex, eHouse, skid-mounted substation
To next
inverter
B E E
A D
Id
ID+GPD
ID+GPD
START
BACK NEXT
DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS
—
String combiner boxes GEMINI E90 PV Fuse Holders and fuses OVR PV S800PV Ground Fault Detector
In a photovoltaic system, the modules The E90 PV fuse holders have been Surge Protective Devices are now well Interrupter
are arranged in strings and arrays specifically designed for photovoltaic integrated in the solar system to S800PV is used for GFDI application
depending on the type of inverter used, applications. Thanks to their rated protect DC and AC sides with the aim (Ground-Fault Detector Interrupter) in
the total power and the technical voltage up to 1500V DC, they are to provide continuity of service and photovoltaic systems. The S804PV-SP5,
characteristics of the modules. ABB perfect for protection of strings in PV reduce risk of fire, protecting from S804U-PVS5 and S804U-PVSP5 provide
offers a complete range of all-in-one applications. Their compact size is overvoltages due to lightning strikes or ground fault protection according to
combiner boxes hosting string optimal for installation in a string network disturbances. We designed the IEC60947-2 for 1500 VDC, UL489B for
protection devices, disconnectors and combiner box or in an inverter. OVR PV to improve performance and 1000 VDC and UL489B (recognized) for
surge protective devices (SPDs). E90 PV can be used in combination protect any photovoltaic system 1500 VDC. In case of a ground fault, the
It is possible to add also monitoring with E9F PV cylindrical fuses for 1000 according to IEC 61643-31 Standard. breaker will trip, so that the PV
devices. or 1500V DC. For more information visit: link generator will not be damaged.
START
BACK NEXT
—
DC switch-disconnectors 16...1600 A GF contactor
SACE Tmax T - PV
The OTDC range of switch-disconnectors Dedicated contactor for PV solar appliactions. First ever
The SACE Tmax PV range of molded-case circuit-
from 16 to 1600A is specially designed for contactor for new IEC utilization category DC-PV3.
breakers and switch-disconnectors for IEC and UL
DC applications. Thanks to compact Gf contactors range enables automatic, remote and effcient
applications on both the DC and AC sides of a
design, efficiency and reliability, they bring DC switching for 1500V DC solar appliations. Bringing energy
photovoltaic plant, expands the widely appreciated
PV installations to the next level. The efficiency, continuous operation and reduced project time to
ability of the SACE Tmax T range to provide the most
versatile OTDC portfolio includes solutions central PV inverter manufacturers.
adaptable and versatile solution for every type of
for installations with the most special Standards: IEC/UL
application. The aim is to enhance energy efficiency
requirements: 1500 V DC voltages, Rated operational voltage Ue max: 1500V DC
and limit the rated currents involved, thereby reducing
multi-circuit switching and combined load Rated current 1500V DC-PV3: 875...1050A
switchgear size, installation time and costs.
outputs up to 1600 A. For more information visit: link
START
BACK NEXT
—
circuit-breaker.
START
BACK NEXT
—
Residual current devices - RCDs OVR QuickSafe® SACE Emax 2/E9 SACE Tmax T4V-HA, T5V-HA and T5X-HA
Residual current devices protect people QuickSafe is our new generation of • Smart, plug-and-play architecture, SACE Tmax PV can be used in plants with
from life-threatening indirect contacts Surge Protective Devices (SPD) with easy to use voltage up to 800V AC and do not require
according to IEC/EN 61008 or improved performance. Thanks to • The best performance up to 900V of derating in voltages and breaking
IEC/EN 61009 Standards. ABB offers a innovative technology this new range any device on the market capacity up to 4000m. SACE Tmax PV
comprehensive range of devices like of SPDs covers residential and • The first smart circuit-breaker that T4V-HA, T5X-HA and T5V-HA circuit-
RCCBs, RCBOs, RCD-blocks, Earth industrial applications with an enables direct communication with breakers for AC applications are available
Leakage Relays DIN-Rail and front extremely good protection level, simple ABB Ability™ Energy and Asset in UL, IEC 60947-2 and GB14048.2
panels in order to cope with all the installation and preventive Manager versions. The T4V-HA bearing the three
applications in residential, commercial maintenance. All according to • Emax 2/E9 all-in-one is the most UL, IEC and CCC marks and T5V-HA
and industrial segments. IEC/EN 61643-11 Standard. compact circuit-breaker on the market bearing both the IEC and UL marks, while
For more information visit: link For more information visit: link For more information visit: link T5X-HA fulfils the UL 489 requirements
START
BACK NEXT
—
Switches Fuse switch-disconnectors

The switch family consists of a complete range of InLine II, EasyLine XLP and SlimLine XRG are a technically reliable and
switch-disconnectors, switch fuses, change-over proven solution for demanding conditions. A wide range of devices with
switches, automatic transfer switches, bypass 800 -1000V AC ratings up to 120kA are available to support the highest
switches, cam switches and fuses. voltage architectures in solar power plants. With a wide range of
ABB’s switches are designed for flexibility and accessories and cable terminal connections, they guarantee the highest
reliable performance in a wide variety of amount of safety and stability. For voltages up to 880V AC, an Electronic
applications: power distribution for residential and Fuse Monitoring is available as accessory.
industrial buildings, HVAC, water pumping stations, For more information visit: link
data centers and photovoltaic installations.
START
BACK NEXT
—
Grid connection (Low Voltage)
Temperature monitoring relays Grid feeding monitoring Ekip UP CEI 0-16 UPS PowerValue 11T G2 CEI - 016
The temperature monitoring relay CM-TCN relays CM-UFD (Interface Protection System) UPS PowerValue 11T G2 CEI - 016 is a
measures temperatures of solids, liquids ABB’s CM-UFD range are multi- Ekip UP performs the functions of SPI relay single-phase, double conversion
and gaseous media within up to three functional grid feeding monitoring for the active systems connected to the MV uninterruptible power supply (VFI) which
sensor circuits using different types of relays, installed between the distribution network. Complying to CEI guarantees up to 3 kW for applications
sensors, such as PT100, PT1000, PTC or NTC renewable energy system and the 0-16 Standard aligned with the European in MV / LV transformer substations com-
at the same time. The device allows different public grid. Standards EU 2016/631, EU 2016/1388 and pliant with CEI-016. The UPS guarantees
thresholds and has three output relays. Easy They detect unusual events in the EU 2016/1447. Among its 35 protections, continuity for a period of 60 minutes
to configure thanks to predefined settings public power grid and automatically the one for restricted ground fault REF maintaining a power reserve, starting
for key applications and Epic mobile App. disconnect and reconnect the (ANSI 87) can command circuit-breakers from the battery, useful for resetting the
Thanks to Modbus RTU can easily renewable power plant. both by wired signal and with advanced interface protection system (SPI) and
communicate with supervisors. For more information visit: link native communication protocols such as subsequent closing of the main switch.
IEC 61850. For more information visit: link
START
BACK NEXT
—
Energy Meters Circuit Monitoring Systems M4M ABB Ability™ Energy and Asset
Energy consumption awareness is key With the rise of digitalization and the M4M is a stand-alone network analyzer Manager (EAM)
to reduce energy costs and improve Internet of Things (IoT), data collection that responds to all the monitoring EAM is the innovative cloud
energy efficiency on your machines from the entire network for analysis needs of the energy distribution management platform developed to
and electrical assets. becomes easier, enabling optimization system: from the high-precision monitor, optimize and manage
Energy meters allow to identify areas of energy usage and assets. monitoring of the electrical parameters electrical systems. Among the main
for improvement and to generate From monitoring energy consumption of energy efficiency to the complete features, multisite management,
benefits for owners, facility managers to control of operations and costs, analysis of the energy quality using real-time alerts via email and sms,
and users. They enable to run smarter connectivity-based solutions can advanced KPIs. Thanks to the report of the stored values, digital twin
buildings in a more energy and cost improve energy efficiency while connectivity features, M4M can take of the system, predictive maintenance
efficient way. reducing costs. advantage of the integration of functions, support to ISO 50001.
For more information visit: link For more information visit: link scalable energy and asset management For more information visit: link
in ABB solutions to monitor, optimize
and control the entire electrical system.
START
BACK NEXT
—
Consumer units, enclosures and low voltage switchboards
Gemini multipurpose enclosures ARIA Polysafe System pro E power

Gemini switchboards are made through Universal polyester enclosures IP66, Polyfunctional enclosures in polyester System pro E power is an innovative
co-injection technology and ABB is the IK10, UL, CSA and Lloyd's Register IP65 / IP54, IK10, UL and CSA certified. solution for main distribution boards
first manufacturer to use it as a certified. 7 sizes from 315 x 215 x 170 14 standard sizes, from 500 x 500 mm with rated current up to 6300A and
molding technique. This process mm up to 1035 x 835 x 300 mm. up to 1250 x 1000 mm, combinable with short-circuit current up to 120kA.
obtains a compact external hard Self-extinguishing and halogen-free. each other and with a 320 mm depth Designed to easily respond to all
covering and an expanded internal soft Corrosion resistant and requires no extendable to 640 mm. Factory electrical installation requirements in
core, guaranteeing the highest level of maintenance. assembled (empty or equipped). terms of degree of protection, form of
mechanical protection against impacts segregation and electrical characteris-
For more information visit: link For more information visit: link
(IK10). Gemini keeps its mechanical tics, according to the latest interna-
characteristics in the long term. tional Standards and in perfect synergy
For more information visit: link with all ABB low voltage equipment.
START
BACK NEXT
Unipack CSS EcoFlex eHouse Secondary Skid Unit eStorage Flex

Safe working: Modular, factory assembled and tested, • Pre-configured design A compact, fully integrated, pre-engineered,
• Internal arc fault and type tested (IEC with ISO dimensions: solutions lithium ion battery energy storage system to
62271-202) • Combinable modules • Factory assembled and maximize the return on investment reducing
• Connected to SCADA • Seismic rated routine tested installation time, complexity and transportation
• ABB AbilityTM enabled for maintenance • C5M Coating • One piece delivery costs. It's optimized for functionality, featuring
and remote management Risk mitigation, improved lead time for minimizing site works digital intelligence that improves performance
Optimized life cycle and maintenance and reduced overall cost: • Efficient cooling based an and operating costs. Available in different power
cost: • Minimal site works open air design with and energy ratings up to 1300 kW / 1550 kWh in
• Corrosion resistant enclosure of Glass • Factory production no additional HVAC required one 40 EcoFlex, ready for AC coupling.
Reinforced Polyester Transportable, configurable and • No exposed live parts ABB also offers eStorage Max version to support
Fast installation, commissioning and standardized: • ABB AbilityTM digitally enabled large scale projects, providing a modular
relocation: • Configurable: electrical equipment, solution providing predictive "building block" approach optimized following
• Lightweight and factory assembled floor/wall material, module maintenance and remote customer needs. Same flexibility and values of
• Flexible with wide range of ratings combinations management eStorage Flex for customer projects at utility
For more information visit: link • Reduced engineering For more information visit: link scale for 10 MW or more.
• Standard shipping For more information visit: link
START
BACK NEXT
EcoFlex eHouse eHouse Air-insulated switchgear Gas-insulated switchgear ZX family

Modular, factory assembled and tested, • Pre-fabricated transportable UniGear family Switchgear for primary distribution up
with ISO dimensions: switch room for electrical switching Switchgear for primary distribution up to 40.5 kV. Flexible combination,
• Combinable modules and distribution to 40.5 kV. ABB Ability™ UniGear Digital reliability, availability and economy.
• Seismic rated • Total solution responsibility, offers flexibility for any application. Together with complete conventional
• C5M Coating risk and design interface by ABB The digital solution takes advantage solutions, the use of digital protection
Risk mitigation, improved lead time • Predictable delivery and cost schedule of well-proven components: and control technology, sensor systems
and reduced overall cost: with majority of works performed current & voltage sensors, protection and plug-in connections make ZX
• Minimal site works offsite relays with IEC 61850 communication systems fit for the future.
• Factory production • Full factory testing improves to ensure a reliable electrical network. For more information visit: link
Transportable, configurable and energization time For more information visit: link
standardized: • Simplified project management
• Configurable: electrical equipment, and single commercial agreement
floor/wall material, module For more information visit: link
combinations
• Reduced engineering
• Standard shipping
START
BACK NEXT
Low voltage switchgear External Lightning Protection - OPR Scalable Electrical Monitoring
At the core of ABB low-voltage To provide effective protection, the and Control Systems
solutions is the MNS solution platform Solar system must be protected This solution leverages and maximizes
which, in the age of Industry 4.0, has against direct lightning strikes and ABB portfolio across medium- and
integrated capabilities to sense, collect have a proper grounding system in low-voltage segments.
and analyze the current and upcoming addition to protection against The deployed products are diverse in
condition of the electrical assembly overvoltage on both sides of the nature and include EkipUp units, ABB
through ABB Ability™ inverter. OPR, ESE lightning rod is an AbilityTM Energy and Asset Manager,
For more information visit: link active system that protects against COM600, ABB zenon Energy Edition,
direct lightning. AC500, AC800M together with ABB
For more information visit: link Relion/legacy relays, 3rd party devices,
MV, LV switchgear and associated
systems, using communication protocols
and Standards such as IEC 61850, Modbus,
IEC 60870-5, Profibus and OPC.
START
BACK NEXT
—
ABB Ltd.
Affolternstrasse 44
CH-8050 Zurich
Switzerland
https://new.abb.com/low-voltage/industries/solar
9AKK107680A9089 - 04/2022
The information contained in this document is for general information purposes only.
While ABB strives to keep the information up to date and correct, it makes no representations
or warranties of any kind, expressed or implied, about the completeness, accuracy, reliability,
suitability or availability with respect to the information, products, services, or related graphics
contained in the document for any purpose. Any reliance placed on such information is therefore
strictly at your own risk.
ABB reserves the right to discontinue any product or service at any time.
© Copyright 2022 ABB. All rights reserved.
START
BACK HOME

Solution For Solar Energ-Solar Catalog

Uploaded by

Copyright:

Available Formats

Solution For Solar Energ-Solar Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Solution For Solar Energ-Solar Catalog

Uploaded by

Copyright:

Available Formats

—

Solutions for solar energy

ABB is a world leading supplier of innovative technologies for

As renewables and digitalization enable fundamental changes in how we generate,

The challenge of using renewables in the energy mix is to

Power Energy storage

Connection Consulting Design Maintenance Optimization

Power management, data integration, Predictive analytics,

Monitor Optimize Control

ABB has been a leading player in the solar power industry

Furthermore, to check ABB capabilities

High-performance High-performance polarized OTDC switches from 16 to 32 Amperes

Residual current devices - RCDs OVR QuickSafe® E90 DS-ARC1

Miniature circuit-breakers - MCBs Molded case circuit-breakers

Switch-disconnectors SD 200 SACE Tmax XT switch-disconnectors EasyLine - XLP

Manual operated switch fuses Switch-disconnectors

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

SACE Tmax T - PV DC switch-disconnectors 16...1600 A High-performance

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

Molded case circuit-breakers SACE Emax 2 Ekip UP

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

SlimLine XRG AF contactors

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

Gemini multipurpose enclosures ARIA Polysafe System pro E power

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

Unipack CSS EcoFlex eHouse Secondary Skid Unit

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION / GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

Switches Fuse switch-disconnectors

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

Gemini multipurpose enclosures ARIA Polysafe System pro E power

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

Unipack CSS EcoFlex eHouse Secondary Skid Unit eStorage Flex

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

EcoFlex eHouse eHouse Air-insulated switchgear Gas-insulated switchgear ZX family

DC AC POWER COLLECTION GRID CONNECTION OTHER PRODUCTS

You might also like