CHE 521

Spring 2024
Major 1

Ammonia Production
Background

You work for a consulting company that has been hired to evaluate the design of an ammonia
synthesis loop designed by an in-house group at your client’s small facility. You are only to
evaluate the ammonia synthesis portion of a much larger process that takes coal, converts it into
a synthesis gas (syngas), adjusts the composition of the syngas, and produces ammonia.
Ammonia is one of the five most produced chemicals in the industry. It is a raw material for
nitrogen oxides and fertilizers, among others. The process in question is to produce 50,000
tonne/y of ammonia in an 8000-hour year.

Ammonia Production

Unit 600 produces ammonia from syngas, which consists of nitrogen, hydrogen, methane,
and trace amounts of carbon dioxide. Figure 1 illustrates the design developed internally by your
client. Tables 1 and 2 are the stream tables and utility summary, respectively. Table 3 is a
partial equipment summary.

In the design, the syngas feed is assumed to have been pretreated to yield stoichiometric
amounts of nitrogen and hydrogen. In the pretreatment, oxygen-containing compounds like CO2
must be removed, because amounts above 10 ppm in the reactor poison the catalyst. One method
for accomplishing this is by methanation, hence the small amounts of methane in the feed
syngas. The syngas is compressed, mixed with the recycle stream and the temperature brought
to 350°C. The reactor is a shell-and-tube design. Because ammonia production is highly
exothermic, heat is removed using a Dowtherm™ A circulation loop. The reaction is
equilibrium limited, and it is assumed that the temperature approach to equilibrium is 20°C. The
catalyst brings the reaction to this point rapidly. The reaction and equilibrium constant are:

N 2 + 3H 2 = 2 NH 3 (1)

2
p NH 11806
K= 3
= 3.29  10−12 exp  (2)
3
p N pH 2
 T 
2

where the units of K are atm-2 and T is in Kelvin. The reactor effluent is cooled and flashed,
producing ammonia and light gases. A fraction of the light gases goes to a purge stream, and the
remaining light gases are compressed and recycled.
2
 Table 1
Stream Table for Unit 600

Stream No 1 2 3 4
Temp C 200 985.42 574.99 350
Pres kPa 1000 15000 15000 14965
Vapor fraction 1 1 1 1
Total kg/h 13025.36 13025.36 78814.08 78814.08
Total kmol/h 1500.00 1500.00 7973.84 7973.84
Component kmol/h
nitrogen 366.63 366.63 1663.12 1663.12
hydrogen 1099.88 1099.88 4990.03 4990.03
carbon dioxide 0.0084 0.0084 0.076 0.076
methane 33.48 33.48 334.16 334.16
ammonia 0 0 986.45 986.45

Stream No. 5 6 7 8
Temp C 350 15 -38.79 -38.79
Pres kPa 14915 14880 500 500
Vapor fraction 1 0.81 0.93 0
Total kg/h 78814.08 78814.08 78814.08 5715.42
Total kmol/h 7528.76 7528.76 7528.76 335.59
Component kmol/h
nitrogen 1440.58 1440.58 1440.58 0.033
hydrogen 4322.42 4322.42 4322.42 0.023
carbon dioxide 0.076 0.076 0.076 0.0009
methane 334.16 334.16 334.16 0.0697
ammonia 1431.52 1431.52 1431.52 335.47

Stream No. 9 10 11 12
Temp C -38.79 -38.79 -38.79 488.54
Pres kPa 500 500 500 15000
Vapor fraction 1 1 1 1
Total kg/h 73098.78 7309.88 65788.90 65788.90
Total kmol/h 7193.17 719.32 6473.85 6473.85
Component kmol/h
nitrogen 1440.55 144.06 1296.50 1296.50
hydrogen 4322.50 432.24 3890.15 3890.15
carbon dioxide 0.075 0.0075 0.067 0.067
methane 334.09 33.41 300.69 300.69
ammonia 1096.06 109.61 986.45 986.45
 4

Table 1
Stream Table for Unit 600
(continued)

Stream No. 13 14 15
Temp C 300 250 300
Pres kPa 960 925 1000
Vapor fraction 0 0 0
Total Dowtherm A kg/h 1.893105 1.893105 1.893105

Table 2
Utility Stream Flow Summary for Unit 600

E-601 E-602 E-603

cw cw cw
1.46106 kg/h 2.43106 kg/h 5.65105 kg/h
 5

Table 3
Partial Equipment Summary
Heat Exchangers
E-601 E-603
A = 716.0 m2 A = 45.73 m2
1-2 exchanger, floating head, carbon steel 1-2 exchanger, floating head, carbon steel
process stream in shell Dowtherm in tubes
Q = 61,030 MJ/h Q = 23651 MJ/h
maximum pressure rating of 15,000 kPa maximum pressure rating of 2000 kPa
E-602
A = 758.8 m2
1-2 exchanger, floating head, carbon steel
process stream in shell
Q = 101,661 MJ/h
maximum pressure rating of 15,000 kPa

Reactors
R-601 – Heat Exchanger Portion R-601 – Reactor Portion
Q = 23651 MJ/h catalyst in tubes
A = 661.9 m2 promoted Ru catalyst on graphite support
counterflow exchanger, floating head, carbon steel
process stream in tubes
maximum pressure rating of 15,000 kPa

Pumps and Compressors

C-601 P-601 A/B
carbon steel carbon steel
power = 10.33 MW power = 18.96 kW
65% efficient 80% efficient
C-602
carbon steel
power = 30.74 MW
65% efficient

Vessels
V-601
carbon steel
height = 4.5 m
diameter = 0.9 m
maximum pressure rating of 1000 kPa
 6

For additional information on ammonia production, consult the literature. Some possibilities
are suggested.1,2 It is highly recommended that you read about ammonia production before
proceeding with this assignment.

Many chemical prices are available at http://www.icis.com/StaticPages/a-e.htm. The value

of syngas is $0.10/kg.

Assignment

Your assignment is to evaluate the in-house design, identify problems or errors, if any, that
you find, and suggest solutions for these problems. Since the custom-made equipment has
already been ordered, solutions to problems that retain as much of this equipment as is possible
are desired. You should also recommend any other changes that you feel should be made to
improve performance in Unit 600.

Specifically, you are to prepare the following:

1. a written report detailing your evaluation of the present design, recommended

modifications (if any), and incremental costs (savings) associated with your
recommended modifications. This should include:
a. an explanation of any errors found in the design of Unit 600.
b. an explanation and justification for any improvements your recommend to the design
of Unit 600.
c. an incremental economic evaluation of the recommended modifications.
d. a PFD, stream table, utility table, and equipment list for the modified process, if the
process is indeed modified. If there are modifications, the report should contain a list
of new equipment to be purchased, including size, cost, and materials of construction

Oral Presentation

You will be expected to present and defend your results. Your presentation should be 15-20
minutes, followed by question and answer period. Make certain that you prepare for this
presentation since it is an important part of your assignment. You should bring at least one hard
copy of your slides to the presentation and hand it out before beginning the presentation.

Late Reports

Late reports are unacceptable.

 7

Appendix
Calculations and Other Pertinent Information
E-601

Q = 61030106 J/h 575

process fluid in shell
cw hi = 1000 W/m2K 350
process stream ho = 60 W/m2K T
U  (1/hi + 1/ho)-1 = 56.6 W/m2K
40
Tlm = 418.33C
A = 716.0 m2 30
Q = m CpT = m  (4.184 kJ/kg°C)(10°C)
m =1.46106 kg/h Q

E-602
350
Q = 101661106 J/h
process fluid in shell
cw hi = 1000 W/m2K T
process stream partial condensation ho = 1000 W/m2K 15
15
U  (1/hi + 1/ho)-1 = 500 W/m2K
5
Tlm = 87.36C
A = 758.8 m2
F = 0.852 Q
Q = m CpT = m  (4.184 kJ/kg°C)(10°C)
6
m =2.4310 kg/h
assume T-Q diagram at right is approximately true for partial condensation

E-603

Q = 23651106 J/h 300

Dowtherm fluid in tubes 250
Dowtherm hi = 1500 W/m2K
cw ho = 1000 W/m2K T
U  (1/hi + 1/ho)-1 = 600 W/m2K 40
Tlm = 239.44.6C 30
A = 45.73 m2
Q = m CpT = m  (4.184 kJ/kg°C)(10°C)
Q
m = 5.6510 kg/h
5
 8

R-601 heat exchanger

Q = 23651106 J/h
Tlm = 71.135C
assumes straight line – really get hot spot 350 350
this is conservative calculation since Tlm is really larger as the
T-Q diagram to the right shows
T
400
Dowtherm in shell ho = 2000 W/m2K
350
reaction stream hi = 150 W/m2K
U  (1/hi + 1/ho)-1 = 139.53 W/m2K
A = 661.9 m2 Q
Cp = 2.5 kJ/kg°C for Dowtherm
 DT = Q / C p T = Q /(2.5 kJ/kgC)(50C )
m
m DT = 1.893105 kg/h
  1000 kg/m3 for Dowtherm

V-601

assume 10 min residence time for liquid

assume liquid is half of total volume
from Chemcad:
liquid flowrate in Stream 8 = 8.7427 m3/h
(8.7427 m3/h)(h/60 min)(10 min)=1.457 m3
double volume to 2.915 m3
2.915 m3 = d 2h/4
assume h = 5d
d  0.9 m
h  4.5 m

P-601 A/B and Loop

all pipe is 3 in schedule 40

di = 0.07792 m
A = 0.004769 m2
10 m equivalent pipe length
4 m elevation change from reactor exit to reactor entrance (Dowtherm out top, in bottom)
choose 75 kPa pressure rise across pump
keep Dowtherm pressurized to reduce volatility and avoid cavitation
pressure out of reactor = 960 kPa
pressure out E-603 = 925 kPa
pressure out of pump 1000 kPa
Dowtherm properties:
Cp = 2.5 kJ/kg°C
 = 997 kg/m3
 = 0.3 cP
 9

Dowtherm in enters reactor at 250°C, Dowtherm exits reactor at 300°C

for reactor heat exchanger Q = 2.3651010 J/h = 2.5 J/g°C (50°C) m Dowtherm
m Dowtherm = 1.893105 kg/h
v = m Dowtherm /A = 11.0 m/s
commercial steel pipe  /d = 0.0059
Re = dv / = 2.87106
from Pavlov equation: f = 0.0080
mechanical energy balance
75000 2(10)(0.0080)(11.0) 2
+ 9.81(−4) + − 0.8Ws = 0
997 0.07792
Ws = 356 J/kg
W s = 18.96 kW

140

120

100
P (kPa)

80

60

40

20

0
0 50 100 150 200 250
3
flowrate (m /h)

Pump Curve for P-601 A/B

Equation for pump curve: P(kPa) = 121.1 − 0.02838v + 0.0003209v 2 − 0.000005536v3