BD/DVD Home Theatre System: BDV-IT1000ES/BDV-IS1000

4-109-708-14(1)
BD/DVD Home Theatre System

Operating Instructions
BDV-IT1000ES/BDV-IS1000
(1)
© 2008 Sony Corporation
Sony Corporation Printed in Malaysia
filename[D:\Documents and Settings\norio-
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb02saf.fm] masterpage:Left
specdef v20070110
WARNING Date of Manufacture Marking is located on the rear

exterior.
To reduce the risk of fire or electric
shock, do not expose this apparatus to The following FCC statement applies only to the
rain or moisture. version of this model manufactured for sale in the
USA. Other versions may not comply with FCC
Caution – The use of optical instruments technical regulations.
with this product will increase eye
WARNING
hazard.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Do not install the appliance in a confined space, such
Part 15 of the FCC Rules. These limits are designed to
as a bookcase or built-in cabinet.
provide reasonable protection against harmful
To reduce the risk of fire, do not cover the ventilation
interference in a residential installation. This
opening of the apparatus with newspapers, tablecloths,
equipment generates, uses, and can radiate radio
curtains, etc. Do not place the naked flame sources
frequency energy and, if not installed and used in
such as lighted candles on the apparatus.
accordance with the instructions, may cause harmful
To reduce the risk of fire or electric shock, do not interference to radio communications. However, there
expose this apparatus to dripping or splashing, and do is no guarantee that interference will not occur in a
not place objects filled with liquids, such as vases, on particular installation. If this equipment does cause
the apparatus. harmful interference to radio or television reception,
Do not expose batteries or apparatus with battery- which can be determined by turning the equipment off
installed to excessive heat such as sunshine, fire or the and on, the user is encouraged to try to correct the
like. interference by one or more of the following measures:
In door use only. – Reorient or relocate the receiving antenna (aerial).
– Increase the separation between the equipment and
For the customers in the U.S.A receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
THIS CLASS B DIGITAL DEVICE COMPLIES
WITH PART 15 OF THE FCC RULES OPERATION
This symbol is intended to alert the user to IS SUBJECT TO THE FOLLOWING TWO
the presence of uninsulated “dangerous CONDITIONS: (1) THIS DEVICE MAY NOT
voltage” within the product’s enclosure that CAUSE HARMFUL INTERFERENCE, AND (2)
may be of sufficient magnitude to constitute THIS DEVICE MUST ACCEPT ANY
a risk of electric shock to persons. INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
This symbol is intended to alert the user to
UNDESIRED OPERATION.
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance. You are cautioned that any changes or modifications
not expressly approved in this manual could void your
Owner’s Record authority to operate this equipment.
The model and serial numbers are located at the rear
exterior of the control unit. Record the serial number in Important Safety Instructions
the space provided below. Refer to them whenever you 1) Read these instructions.
call upon your Sony dealer regarding this product. 2) Keep these instructions.
Model No. BDV-IT1000ES/BDV-IS1000 3) Heed all warnings.
Serial No.______________ 4) Follow all instructions.
2US
model name [BDV-IT1000ES/BDV-IS1000]

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb02saf.fm] masterpage:Right
specdef v20070110
5) Do not use this apparatus near water. Note to CATV system installer:
6) Clean only with dry cloth. This reminder is provided to call the CATV system
7) Do not block any ventilation openings. Install in installer’s attention to Article 820-40 of the NEC that
accordance with the manufacturer’s instructions. provides guidelines for proper grounding and, in
8) Do not install near any heat sources such as particular, specifies that the cable ground shall be
radiators, heat registers, stoves, or other apparatus connected to the grounding system of the building, as
(including amplifiers) that produce heat. close to the point of cable entry as practical.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two Notice for the customers in
blades with one wider than the other. A grounding Canada
type plug has two blades and a third grounding
prong. The wide blade or the third prong are For the wireless transceiver
provided for your safety. If the provided plug does (EZW-RT10)
not fit into your outlet, consult an electrician for This class B digital apparatus complies with Canadian
replacement of the obsolete outlet. ICES-003.
10) Protect the power cord from being walked on or This device complies with RSS-Gen of IC Rules.
pinched particularly at plugs, convenience Operation is subject to the following two conditions:
receptacles, and the point where they exit from the (1) this device may not cause interference, and (2) this
apparatus. device must accept any interference, including
11) Only use attachments/accessories specified by the interference that may cause undesired operation of this
manufacturer. device.
12) Use only with the cart, stand, tripod, bracket, or This equipment complies with IC radiation exposure
table specified by the manufacturer, or sold with limits set forth for uncontrolled equipment and meets
the apparatus. When a cart is used, use caution RSS-102 of the IC radio frequency (RF) Exposure
when moving the cart/apparatus combination to rules. This equipment should be installed and operated
avoid injury from tip-over. with at least 20cm and more between the radiator and
person’s body (excluding extremities: hands, wrists,
feet and ankles).
Precautions
13) Unplug this apparatus during lightning storms or On power sources
when unused for long periods of time. • The unit is not disconnected from the AC power
14) Refer all servicing to qualified service personnel. source (mains) as long as it is connected to the wall
Servicing is required when the apparatus has been outlet (mains), even if the unit itself has been turned
damaged in any way, such as power-supply cord or off.
plug is damaged, liquid has been spilled or objects • Install this system so that the AC power cord (mains
have fallen into the apparatus, the apparatus has lead) can be unplugged from the wall socket
been exposed to rain or moisture, does not operate immediately in the event of trouble.
normally, or has been dropped.
Copyrights and Trademarks
For the wireless transceiver • This product incorporates copyright protection
(EZW-RT10) technology that is protected by U.S. patents and other
This transmitter must not be co-located or operated in intellectual property rights.
conjunction with any other antenna or transmitter. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home
and other limited viewing uses only unless otherwise
This equipment complies with FCC radiation exposure
authorized by Macrovision.
limits set forth for uncontrolled equipment and meets
Reverse engineering or disassembly is prohibited.
the FCC radio frequency (RF) Exposure Guidelines in
• This system incorporates with Dolby* Digital and
Supplement C to OET65. This equipment should be
Dolby Pro Logic (II) adaptive matrix surround
installed and operated with at least 20cm and more
decoder and the DTS** Digital Surround System.
between the radiator and person’s body (excluding
extremities: hands, wrists, feet and ankles). * Manufactured under license from Dolby
Laboratories.
3US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb02saf.fm] masterpage:Left
specdef v20070110
“Dolby”, “Pro Logic”, and the double-D

symbol are trademarks of Dolby Laboratories.
** Manufactured under license under U.S. Patent
About These Operating
#’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,226,616; 6,487,535 & other U.S.
Instructions
and worldwide patents issued & pending. DTS
is a registered trademark and the DTS logos, • The instructions in these Operating
Symbol, DTS-HD and DTS-HD Master Audio Instructions describe the controls on the
are trademarks of DTS, Inc. © 1996-2008 DTS, remote. You can also use the controls on the
Inc. All Rights Reserved. unit if they have the same or similar names as
• This system incorporates High-Definition those on the remote.
Multimedia Interface (HDMITM) technology. • Icons, such as , listed at the top of each
HDMI, the HDMI logo and High-Definition explanation indicate what kind of media can be
Multimedia Interface are trademarks or registered used with the function being explained.
trademarks of HDMI Licensing LLC.
For details, see “Playable Discs” (page 130).
• “AVCHD” and the “AVCHD” logo are trademarks of
Matsushita Electric Industrial Co., Ltd. and Sony
• In this manual, “disc” is used as a general
Corporation. reference for the BDs, DVDs, or CDs unless
• Java and all Java-based trademarks and logos are otherwise specified by the text or illustrations.
trademarks or registered trademarks of Sun • The instructions in this manual are for BDV-
Microsystems, Inc. IT1000ES and BDV-IS1000. BDV-IT1000ES
• “BD-Live” and “BonusView” are trademarks of Blu- is the model used for illustration purposes.
ray Disc Association. Any difference in operation is clearly indicated
• “BRAVIA” is a trademark of Sony Corporation. in the text, for example, “BDV-IT1000ES.”
• “S-AIR” and its logo are trademarks of Sony • The Control Menu items may vary depending
Corporation. on the area.
• , “XMB,” and “xross media bar” are trademarks of
• Measurements are expressed in feet (ft) for
Sony Corporation and Sony Computer Entertainment
North American models.
Inc.
• “PLAYSTATION” is a trademark of Sony Computer • The default setting is underlined.
Entertainment Inc.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,” “DVD-RW,”
“DVD+R,” “DVD-R,” “DVD VIDEO,” and “CD”
logos are trademarks.
• “x.v.Color” and “x.v.Color” logo are trademarks of
Sony Corporation.
• “PhotoTV HD” and the “PhotoTV HD” logo are
trademarks of Sony Corporation.
• Other system and product names are generally
trademarks or registered trademarks of the
manufacturers. ™ and ® marks are not indicated in
this document.
4US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb02saf.fm] masterpage:Right
specdef v20070110
About the S-AIR function

The system is compatible with the S-AIR
function, which allows transmission of sound
between S-AIR products wirelessly.
The following S-AIR products can be used with
the system:
• Surround amplifier (supplied): You can enjoy

surround speaker sound wirelessly.
• Surround back amplifier (optional): You can
enjoy surround back speaker sound wirelessly.
• S-AIR receiver (optional): You can enjoy
system sound in another room.
The S-AIR product can be purchased as an

option (the S-AIR product lineup differs
depending on the area).
Notes or instructions for the surround amplifier

or S-AIR receiver in these operating instructions
refer only to when the surround amplifier or
S-AIR receiver is used.
For details on the S-AIR function, see “Using an
S-AIR Product” (page 89).
5US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb_TOC.fm] masterpage:Left
specdef v20070110
Table of Contents
About These Operating Instructions ....... 4 Settings and Adjustments
About the S-AIR function....................... 5 Using the Setup Display ..................... 107
Index to Parts and Control ...................... 7 [Network Update] ............................... 108
Getting Started [Video Settings].................................. 109
Step 1: Assembling [Audio Settings].................................. 111
the Speakers ............................18 [BD/DVD Viewing Settings] ............. 112
Step 2: Positioning the System ...28 [Photo Settings] .................................. 114
Step 3: Connecting the System ...43 [HDMI Settings] ................................. 114
Step 4: Setting up the Wireless [System Settings]................................ 116
System .....................................58 [Network Settings].............................. 117
Step 5: Performing the Easy [Easy Setup]........................................ 118
Setup ........................................60 [Resetting] .......................................... 119
Step 6: Enjoying Sound by Each Additional Information
Function ...................................64 Precautions ......................................... 120
Playback Notes about the Discs ......................... 121
Playing a BD/DVD ............................... 65 Troubleshooting.................................. 122
Playing a CD ......................................... 73 Self-diagnosis Function ...................... 129
Playing Photo Files ............................... 75 Playable Discs .................................... 130
Supported Audio Formats................... 133
Sound Adjustment Video Output Resolution.................... 134
Enjoying Surround Sound..................... 77 Specifications ..................................... 135
Selecting the Sound Mode .................... 80 Language Code List............................ 139
Changing the Sound.............................. 81 Terms and Conditions of Use and End
Tuner User License Agreement .............. 140
Software License Information ............ 142
Listening to the Radio ........................... 83
Glossary.............................................. 151
External Audio Device Index ................................................... 154
Using the DIGITAL MEDIA PORT
Adapter ........................................... 88
Using an S-AIR Product ....................... 89
Other Operations
Using the Control for HDMI Function for
“BRAVIA” Sync ............................ 95
Calibrating the Appropriate Settings
Automatically ................................. 98
Setting the Speakers ............................ 100
Controlling the TV or Other Components
with the Supplied Remote............. 101
Using the Sound Effect ....................... 105
Using the Sleep Timer ........................ 106
Deactivating the Buttons on
the Unit ......................................... 106
6US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb03par.fm] masterpage:Right
specdef v20070110
• : For system operations

Index to Parts and • : For TV operations
• : For set-top box/digital satellite
Control receiver/Sony component (such as VCR, or
DVD player/recorder, etc.) operations
For more information, refer to the pages (For details, see “Controlling the TV or Other
indicated in parentheses. Components with the Supplied Remote”
(page 101).)
Remote control A THEATER (96)

Switches to the optimum video mode for
For details of using the remote, see “Using the watching movies automatically.
remote” (page 16). ONE-TOUCH PLAY (65, 96)
THEATER
ONE-TOUCH
AV
By only pressing the button, the TV turns
PLAY
1 on, the TV is set for BD/DVD input
BRAVIA Sync
selector, and the system starts playing a disc
STB TV
OPERATION CHANGE
BD
2
automatically.
1 2 3
AV "/1 (on/standby) (101)
4 5 6
3
7 8 9 Turns on the connected component such as
CLEAR
0 TIME the TV or set-top box/digital satellite
/ENTER
FAVORITES CC WIDE receiver, or set to standby mode.

AUDIO SUBTITLE ANGLE TV INPUT
4
SCENE
SEARCH TONE NIGHT DISPLAY "/1 (on/standby) (60, 65, 83)
5
RED GREEN BLUE YELLOW
Turns on the system, or set to standby
6 mode.
E
ID NU POP
UP B A (open/close) (65)
GU
ME
/M
P
TO
Opens or closes the disc tray.

NU
7 OPERATION CHANGE (16, 101)

RET
TO IO N S
Changes the source to be operated on the

S
UR
OL
T
OP
N
HOME remote.
: You can operate set-top box/digital
FUNCTION SOUND MODE
8 satellite receiver.
PRESET REPLAY ADVANCE PRESET
: You can operate TV.

TUNING TUNING
9 : You can operate the unit.

S-AIR MODE
C Number buttons (65, 84, 101)
VOLUME CH
MUTING Enters the title/chapter numbers or radio

0 frequencies, etc.
TUNER DIRECT
CLEAR (70, 101)
SLEEP MENU TUNING
Clears the entry field.
A/V DECODING DVD RECORDER
SYNC MODE HDD DVD
qa TIME (71)
DISPLAY
Displays the elapsed/remaining playback
time in the front panel display.
With the cover opened. ENTER (101)
Number 5, FAVORITES/AUDIO, CH +, and Enters the selected item.
H buttons have a tactile dot. Use the tactile dot
as a reference when operating.
7US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb03par.fm] masterpage:Left
specdef v20070110
D AUDIO (81) G TOP MENU (69)

Selects the audio format/track. Opens or closes the BD’s or DVD’s Top
SUBTITLE (68) Menu.
Selects the subtitle language when multi- POP UP/MENU (69)
lingual subtitles are recorded on a BD- Opens or closes the BD-ROM’s Pop-up
ROM/DVD VIDEO. Menu, or the DVD’s menu.
ANGLE (68) OPTIONS (65, 73, 75, 83)
Switches to other viewing angles when Displays the options menu that can be
multi-angles are recorded on a BD-ROM/ selected appears on the TV screen.
DVD VIDEO. HOME (60, 65, 73, 75, 83, 89, 98, 107)
TV INPUT (101)
Switches the TV’s input source between the Enters or exits the system’s home menu.
TV and other input sources. RETURN (83, 101, 117)
FAVORITES (101)
Displays the favorite channel list. Returns to the previous display.
CC (101) C/X/x/c (60, 65, 73, 75, 83, 89, 98, 107)
Changes the subtitle of the TV.
WIDE (101)
Moves the highlight to select a displayed
item.
Changes the aspect ratio of the connected
TV. (ENTER) (60, 65, 73, 75, 83, 89, 98,
107)
E SCENE SEARCH (70)
Enters the selected item.
Switches to Scene Search mode that lets
you move quickly between scenes within GUIDE (101)
the title currently being played back. Displays the Digital Electronic Programme
Guide (EPG).
TONE (105)
Adjusts the sound by changing the TOOLS (101)
frequency envelope of a sound. Displays the operation menu for the current
display.
NIGHT (105)
Activates the night mode function. H FUNCTION (64, 65, 73, 75, 83, 88)
DISPLAY (71)
Selects the playback source.
Displays the playback information on the
TV screen. SOUND MODE (80)
Selects a suitable sound mode for movies or
F Color buttons (RED/GREEN/BLUE/
music.
YELLOW) (85, 117)
Short cut keys for selecting items on some
BD’s menus (can also be used for BD’s
Java interactive operations).
8US

[4-109-708-14(1)]
specdef v20070110
I ./> (previous/next) (65, 73, 75) K SLEEP (106)

Sets the sleep timer.
Skips to the previous/next chapter, track, or TUNER MENU (86)
file. To go to the beginning of the previous Enters the menu for the tuner settings.
track, press . twice.
DIRECT TUNING (86)
PRESET +/– (83)
Selects the radio frequencies.
Selects the preset radio station.
A/V SYNC (73)
REPLAY/ADVANCE (65)
Adjusts the delay between the picture and
sound.
Replays the scene/briefly fast forwards the
scene. DECODING MODE (77)
Selects the system’s pre-programmed
m/M (fast reverse/fast forward) (65,
decoding modes that bring exciting and
73)
powerful sound of movie theaters into your
Fast reverses/fast forwards the disc when
home.
pressed during playback.
Each time you press the button, search DVD RECORDER (101)
speed changes. Changes the operation mode for Sony DVD
To resume normal speed, press H. recorders.
HDD: HDD mode
TUNING +/– (83)
DVD: DVD mode
Searches the radio station.
DISPLAY (83)
H (play) (65, 73, 75)
Changes the radio information in the front
panel display between radio frequency and
Starts or re-starts playback.
station name.
Plays a slideshow when a disc containing
JPEG image files is inserted.
S-AIR MODE (89)
Selects playback mode for the S-AIR
receiver.
X (pause) (65, 73, 75)
Pauses or re-starts playback.

x (stop) (65, 73, 75)
Stops playback and remembers the stop

point (resume point).
The resume point for a title/track is the last
point you played or the last photo for a
photo folder.
J MUTING (65, 73, 101)
Turn off the sound temporarily.
VOLUME +/– (65, 101)
Adjusts the volume.
CH +/– (101)
Selects the channels up and down.
9US

[4-109-708-14(1)]
specdef v20070110
Front panel
FUNCTION VOLUME
HDMI S-AIR
A "/1 (on/standby) (65) C S-AIR indicator

Turns on the unit, or sets to standby mode. Lights up when the S-AIR transceiver is
B Soft-touch buttons (65) inserted in the unit and the system transmits
the sound.
These buttons work by touching lightly
around the printed area or projecting part. D HDMI indicator
Do not press them strongly. Lights up when the HDMI OUT jack is
H (play) correctly connected to HDCP (High-
bandwidth Digital Content Protection)
Starts or re-starts playback.
compliant device with HDMI or DVI
Plays a slideshow when a disc containing
(Digital Visual Interface) input.
JPEG image files is inserted.
E DISC indicator
x (stop)
Flashing: The system is loading a disc.
Stops playback and remembers the stop
Lighting up: A disc is loaded. (When no
point (resume point).
disc is loaded, the DISC indicator is not lit.)
The resume point for a title/track is the last
point you played or the last photo for a F Front panel display
photo folder. G Disc tray (65)
FUNCTION H (remote sensor) (16)
Selects the playback source.
VOLUME +/–
Adjusts the system’s volume.
A (open/close)
Opens or closes the disc tray.
10US

[4-109-708-14(1)]
specdef v20070110
Front panel display
About the indications in the front panel display
D + EX TrueHD TUNED MONO ST EXT HD SLEEP 24P NIGHT

DTS – HD MSTR HI RES PL x
–
DTS ES 96 / 24 LBR NEO:6
MATRIX L – PCM DCS
DISCRETE AAC HDMI 1 2
A Playing status H Lights up when the system is

B Lights up when a station is received. accessing the network.
(Radio only) (83) I Lights up when outputting 1920 ×
C Monaural/Stereo effect (Radio only) 1080p/24Hz video signals.
(83) J Lights up when the night mode is on.
D Lights up when the external memory is (105)
recognized. (55) K Lights up when the HDMI IN1 or 2 jack
E Lights up when outputting 720p/1080i/ is correctly connected to HDCP (High-
1080p video signals from the HDMI bandwidth Digital Content Protection)
OUT jack or 720p/1080i video signals compliant device with HDMI or DVI
from the COMPONENT VIDEO OUT (Digital Visual Interface) output.
jacks. L Current sound format
F Flashes when the sleep timer is set.
(106)
G Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, decoding mode, etc.
11US

[4-109-708-14(1)]
specdef v20070110
Rear panel
BDV-IT1000ES
COMPONENT VIDEO OUT VIDEO OUT IR REMOTE TV OPTICAL SAT/CABLE DIGITAL

Y PB/ PR/ IN
CB CR
VIDEO S-VIDEO OUT IN COAXIAL
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / CB PR / CR
SAT/CABLE
LAN(100)
COMPONENT VIDEO IN ANTENNA
DC5V 500mA MAX 75 COAXIAL
EXTERNAL
FM
SPEAKER TV R L A.CAL
FRONT FRONT CENTER WOOFER AUDIO IN MIC
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
BDV-IS1000
COMPONENT VIDEO OUT VIDEO OUT TV OPTICAL SAT/CABLE DIGITAL

Y PB/ PR/ IN
CB CR
VIDEO S-VIDEO COAXIAL
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / CB PR / CR
SAT/CABLE
LAN(100)
EXTERNAL
FM
FRONT FRONT CENTER WOOFER WOOFER AUDIO IN MIC
R L 1 2 DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
A LAN (100) terminal (56) J AM terminal (53)

B COMPONENT VIDEO IN (SAT/CABLE) K FM 75Ω COAXIAL jack (53)
jacks (50) L HDMI OUT jack (48)
C COMPONENT VIDEO OUT jacks (48) M DMPORT (DIGITAL MEDIA PORT) jack
D VIDEO OUT (VIDEO, S VIDEO) jacks (50)
(48) N A.CAL MIC jack (60, 98)
E HDMI IN1/2 jacks (50) O SAT/CABLE IN (VIDEO, AUDIO R/L)
F IR REMOTE (IN, OUT) (16) (BDV- jacks (50)
IT1000ES only) P TV (AUDIO IN R/L) jacks (48)
G DIGITAL IN (TV OPTICAL) jack (48) Q EXTERNAL slot (55)
H DIGITAL IN (SAT/CABLE OPTICAL, R SPEAKER jacks (45)
COAXIAL) jacks (50)
I EZW-RT10 slot (54)
12US

[4-109-708-14(1)]
specdef v20070110
Surround amplifier
Front panel Rear panel
EZW-RT10
POWER
S-AIR ID SPEAKER
A
POWER/ON LINE B
C
L
PAIRING
PHONES SURROUND SELECTOR R

SURROUND
SURROUND
BACK
A PHONES jack (58) F Wireless transceiver (EZW-RT10) slot

B POWER (ON/OFF) (58, 92) (54)
C POWER / ON LINE indicator (58, 89) G S-AIR ID switch (58, 89)
D PAIRING indicator (92) H SPEAKER L jack (45)
E PAIRING (92) I SPEAKER R jack (45)

J SURROUND SELECTOR switch (58, 92)
13US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb04gst.fm] masterpage:Left
specdef v20080116
Getting Started
Getting Started
Unpacking
BDV-IT1000ES
• Front speakers (2) • Foot pads (thick 2, thin 2) • Video cord (1)
• Wall mounting brackets • Remote commander

(top) (5) (remote) (1)
• Surround speakers (2)
• R6 (size AA) batteries (2)

• Wall mounting brackets
(bottom) (5)
• Center speaker (1)
• Calibration mic (1)
• Bracket covers (10)

• Subwoofer (1)
• Surround amplifier (1)
• Screws (5)
• Desktop stands (4)
• AM loop antenna (aerial) (1) • Speaker cord cover (1)
• Baffle covers (short 3, long • FM wire antenna (aerial) (1)

• Speaker cord holder (1)
2)
or
• Wireless transceivers for the

• Grilles (5) • Speaker cords (6, white/red/ unit (2)
blue/gray/green/purple)
• Operating Instructions
• Basic connections (card)
14US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb04gst.fm] masterpage:Right
specdef v20080116
Note
• Unpack the speakers, being careful not to touch the speaker units.
• Keep speakers away from one another. Speakers are magnetically attracted, may hit each other, and cause damage.
Getting Started
• Keep magnetic objects such as watches, magnetic card, etc., away from the speakers.
BDV-IS1000
• Front speakers (2), center • FM wire antenna (aerial) (1) • Wrench (1)
speaker (1), and surround
speakers (2) or
• Video cord (1) • Surround amplifier (1)
• Remote commander
(remote) (1)
• Speaker cord cover (1)
• R6 (size AA) batteries (2)
• Subwoofer (1) • Speaker cord holder (1)
• Calibration mic (1)
• Wireless transceivers for the

unit (2)
• Brackets (5)
• AM loop antenna (aerial) (1)
• Operating Instructions
• Basic connections (card)
15US

[4-109-708-14(1)]
specdef v20080116
Using the remote

Getting Started
Inserting batteries into the remote

Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the
markings inside the compartment.
Note
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
About operation of the remote

You can operate this system, TV, and set-top box/digital satellite receiver using the supplied remote.
Change the operation mode by using OPERATION CHANGE.
1 2 3
ONE-TOUCH
THEATER PLAY AV 4
7
5
8
6
9
0
BRAVIA Sync
STB TV BD
OPERATION CHANGE
1 2 3
1 2 3
x System operation
Press BD (BD lights up for 1 second).
The remote enters system operation mode, and BD lights up when you press buttons for operation.
When operating the system, point the remote at the remote sensor on the unit.
x TV operation
Press TV (TV lights up for 1 second).
The remote enters TV operation mode, and TV lights up when you press buttons for operation (TV does
not light up when you press a button that is not available for the TV).
To operate the TV, set the remote signal to suit your TV. For details, see “Controlling the TV or Other
Components with the Supplied Remote” (page 101).
16US

[4-109-708-14(1)]
specdef v20080116
x Set-top box/digital satellite receiver/Sony component (such as VCR, DVD player/recorder,

etc.) operation
Press STB (STB lights up for 1 second).
Getting Started
The remote enters set-top box/digital satellite receiver operation mode, and STB lights up when you
press buttons for operation (STB does not light up when you press a button that is not available for the
set-top box/digital satellite receiver).
To operate the set-top box/digital satellite receiver/Sony Component, set the remote signal to suit your
set-top box/digital satellite receiver. For details, see “Controlling the TV or Other Components with
the Supplied Remote” (page 101).
Note
• Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.
To use the remote at a distance from the system

(BDV-IT1000ES only)
You can use the remote away from the system by connecting an IR repeater system (not supplied) to
the unit. Use this optional item when you install the unit in a place where the remote signal cannot be
received.
Rear panel of the unit
Y PB/ PR/ IN
CB CR
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / C B PR / CR
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
E
MOT
IR RE
IR repeater system
IN
OUT
17US

[4-109-708-14(1)]
specdef v20080116
Step 1: Assembling the Speakers

Getting Started
(BDV-IT1000ES only)
Before connecting the speakers, assemble the speakers.
Caution on using the speakers

When moving the speakers, keep one hand under the desktop stand and hold both sides of the speaker,
as in the illustration.
The following actions may damage the speaker.

– Toppling the speaker.
– Shaking the speaker.
– Swinging the speaker.
– Pushing on the speaker.
– Hitting the speaker
Speaker assembly
Use the parts as follows:
• Front speakers (2)
• Surround speakers (2)
• Center speaker (1)
• Speaker cords (5, white/red/blue/gray/green)
• Desktop stands (4)
• Baffle covers (short 3, long 2)
• Grilles (5)
Although the front part of the front speaker is slightly different from that of the surround speaker, the
assembly method is the same. (The illustrations in the following steps are for the front speakers.)
About how to connect the speaker cords, see page 45.
18US

[4-109-708-14(1)]
specdef v20080116
Note
• Spread a cloth on the floor to avoid damaging the floor when you assemble the speakers.
• When assembling, take care not to touch the speaker units.
Getting Started
Ex. Front speaker
Speaker unit
Tip
• You can install the front, center, and surround speakers on a wall by using the wall mounting bracket (supplied)
(page 33). In this case, you do not need to attach the desktop stand to the speaker.
• You can install the front and surround speakers directly on the floor by attaching speaker stands (WS-IT1000F
(optional)).
How to identify the speakers

Check the label on the speaker.
• Front left speaker (L): FRONT L (white)
• Front right speaker (R): FRONT R (red)
• Surround left speaker (L): SUR L (blue)
• Surround right speaker (R): SUR R (gray)
• Center speaker: CENTER (green)
Front and surround speakers

1 Thread the speaker cord through the hole in the bottom of the desktop stand.
Bottom of the desktop stand
Speaker cord
19US

[4-109-708-14(1)]
specdef v20080116
2 Remove the screw from the speaker.

The removed screw is used when attaching the desktop stand. Be sure not to lose the screw.
Getting Started
Front speaker
Screw
Surround speaker
Note
• When assembling, take care not to touch the speaker unit.
20US

[4-109-708-14(1)]
specdef v20080116
3 Connect the speaker cords to the speaker.

The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Getting Started
Use the speaker cords as follows:
• Front left speaker (L): White
• Front right speaker (R): Red
• Surround left speaker (L): Blue
• Surround right speaker (R): Gray
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord
with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the
speaker cord insulation in the speaker terminals.
Front speaker
Connector Color tube

3
Check the polarity on the label.
Surround speaker
Insert the speaker cords into the speaker terminal of the speaker as far as they will go. Ensure that
the cords are secure by gently pulling on them one at a time.
Note
Tip
• When removing the speaker cords from the speaker terminals, pull out the speaker cords while pressing the
white button on the speaker terminal with a tool such as a flathead screwdriver.
21US

[4-109-708-14(1)]
specdef v20080116
4 Attach the speaker to the desktop stand.

Be careful with the orientation of the desktop stand and speaker.
Secure the speaker with the screw removed in Step 2.
Getting Started
Ex. Front speaker
Adjust the length of the cord.

Screw
Note
5 Take up slack in the speaker cord by pulling from the bottom of the desktop stand and
secure the speaker cord by running it through the slot.
Speaker cord
Bottom of the
desktop stand
Slot
Note
22US

[4-109-708-14(1)]
specdef v20080116
6 Attach the baffle cover to the speaker.

Use the baffle cover (short) for the front speaker, baffle cover (long) for the surround speaker.
Press the ends of the baffle cover over the pin(s), then press down to flush fit the speaker front.
Getting Started
Front speaker Surround speaker
“J” mark
Baffle cover (short) Baffle cover (long)
Note
7 Attach the grille to the speaker.
Be careful with the orientation of the grille.
Grille Grille
“SONY” mark “SONY” mark
Note
• Be sure to use the speakers with their grilles attached.
• Do not push on the attached grille. It may cause damage to the speaker unit.
23US

[4-109-708-14(1)]
specdef v20080116
Center speaker
1 Remove the cover from the speaker.
Getting Started
Pry up the cover by inserting a thin, flat object into the slit in the cover. To replace the cover, see
Step 3. Be sure not to lose the cover.
Center speaker
Cover
Slit
Note
Use the speaker cords (green). Be sure to match the speaker cords to the appropriate terminals on
the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube
to #. Do not catch the speaker cord insulation in the speaker terminals.
Center speaker
Connector (green) Color tube (green)

3
Note
24US

[4-109-708-14(1)]
specdef v20080116
3 Secure the speaker cord by running it through the slot, then attach the cover to the
speaker.
Getting Started
Center speaker
Slot Cover
Speaker cords

Use the baffle cover (short). Press the ends of the baffle cover over the pin, then press down to
flush fit the speaker front.
Baffle cover (short)
25US

[4-109-708-14(1)]
specdef v20080116

Getting Started
“SONY” mark Grille
Note
• Be sure to use the speakers with their grilles attached.
6 Attach the foot pads to the bottom of the speaker.
Attach the foot pads (thick) to the front of the speaker and the foot pads (thin) to the rear so that
the speaker tilts up when installed on a TV stand, etc.
Foot pads (thick)
Bottom of the center speaker
Foot pads (thin)
Side view
Foot pads (thin)

Foot pads (thick)
26US

[4-109-708-14(1)]
specdef v20080116
Fully-assembled illustration
Front left speaker (L): Front right speaker (R): Surround left speaker (L): Surround right speaker (R):
Getting Started
White label Red label Blue label Gray label
White Red Blue Gray
Center speaker:
Green label
Green
Note
• When moving the front or surround speaker, hold the desktop stand part (1), not the speaker part (2).
Ex. Front speaker
27US

[4-109-708-14(1)]
specdef v20080116
Step 2: Positioning the System

Getting Started
For the best possible surround sound, all the speakers other than the subwoofer should be placed at the
same distance from the listening position (A).
Place the system as illustrated below.
BDV-IT1000ES
B A Front left speaker (L)

B Front right speaker (R)
C Center speaker
D Surround left speaker (L)
E Surround right speaker (R)
A F Subwoofer
G Unit
C H Surround amplifier
G * Speaker stands are not supplied.
E
F
A A A
A
H
D A
A
A
For surround back speakers
(optional)
J K I Surround back left speaker (L)
J Surround back right speaker (R)
I K Surround amplifier
BDV-IS1000
A Front left speaker (L)

B Front right speaker (R)
B C Center speaker
D Surround left speaker (L)
E Surround right speaker (R)
C F Subwoofer
A G Unit
G
F H Surround amplifier
A A
A
H
A E
A
A
A For surround back speakers
D (optional)
J K I Surround back left speaker (L)
J Surround back right speaker (R)
I K Surround amplifier
28US

[4-109-708-14(1)]
specdef v20080116
About the surround back speaker

You can enjoy 7.1 surround sound with the surround back speakers by purchasing the additional
surround amplifier (optional). Use the commercially available speakers for the surround back speakers.
Getting Started
To use the surround amplifier for the surround back speakers, connect the surround back speakers (not
supplied) to the surround amplifier, see “Using an S-AIR Product” (page 89).
Note
• Avoid placing obstructions around the speaker.
• After installing the speakers, arrange the speaker cords so as not to topple the speakers by catching the speaker cords
with your foot.
• Avoid placing the center speaker on the TV.
• Do not set the speakers in an inclined position.
• Avoid placing the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or discoloration may result.
• Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine.
• Do not lean or hang on the speaker, as the speaker may fall down.
• Do not bend, twist, or fold the speaker grille. (BDV-IT1000ES only)
• Do not insert an object (especially metal) into a hole on the front part of the speaker. (BDV-IT1000ES only)
• Avoid placing the speakers close to a CRT-based TV. It may cause color irregularity. (BDV-IT1000ES only)
• When using the optional stand, we recommend that the speakers are installed on a flat and firm floor (not on a thick
pile carpet, for example). The speakers may topple over if installed on an inclined or soft floor.
Tip
• When you change the positions of the speakers, Sony recommends that you change the settings. For details, see
“Calibrating the Appropriate Settings Automatically” (page 98) and “Setting the Speakers” (page 100).
29US

[4-109-708-14(1)]
specdef v20080116
Using the subwoofer efficiently

Getting Started
To reinforce the bass sound, place the subwoofer as close as possible to a wall.
Close to a wall
Note
• If the subwoofer is to be placed ahead of the front speaker, the distance should be less than 0.5 m (1.6 ft).*
*
• You may not get the bass sound efficiently when the subwoofer is placed outside (3). You need to adjust the setting
of the distance from the listening position.
3 3
30US

[4-109-708-14(1)]
specdef v20080116
• Do not place objects on the top of the subwoofer where the speaker unit is installed.
Getting Started
• Do not place the subwoofer under a desk or in a cabinet, etc.
• Do not place the subwoofer behind an obstruction, such as a TV, etc. Middle range sound will fall.
TV etc.
31US

[4-109-708-14(1)]
specdef v20080116
Note on handling the subwoofer

• Do not place your hand into the slit of the subwoofer when lifting it. The speaker driver may be damaged. When
lifting, hold the bottom of the subwoofer.
Getting Started
Subwoofer
Slits
• Do not push the top of the subwoofer where the speaker unit is installed.
Speaker unit
32US

[4-109-708-14(1)]
specdef v20080116
Installing the speakers on a wall
Getting Started
Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
BDV-IT1000ES
1 Decide the installation of the speakers.
Recommended example:
Front View
Center speaker
Front left speaker (L) Front right speaker (R)
TV
Position the front speakers so that their centers align with the TV. Position the center speaker so
that the center of the speaker and the TV are aligned.
Top View
Front left speaker (L) TV Front right speaker (R)
The surround speakers should be placed as high (or a little higher) than the front speakers.
Tip
• For details about positioning the speakers, see “Step 2: Positioning the System” (page 28).
33US

[4-109-708-14(1)]
specdef v20080116
2 Decide the speaker position and mark the screw positions.

You need two screws (not supplied) for each bracket. The following indicates the narrower
positions of the two screws.
Getting Started
For the front/surround speakers For the center speaker

565 mm (22 1/4 inches)
565 mm (22 1/4 inches)
3 Remove the cover(s) from the speaker.

Pry up the cover by inserting a thin, flat object into the slit in the cover.
Cover
Slit
Center speaker
Note
34US

[4-109-708-14(1)]
specdef v20080116

Thread the speaker cord through the holes in the bracket (bottom).
Getting Started
Use the speaker cords as follows:
• Front left speaker (L): White
• Front right speaker (R): Red
• Surround left speaker (L): Blue
• Surround right speaker (R): Gray
• Center speaker: Green
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected. Be sure to match the speaker cords to the appropriate terminals on the speakers: the
speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not
catch the speaker cord insulation in the speaker terminals.
Ex. Front speaker
Connector Color tube
Center speaker
Left side
Insert the speaker cords into the speaker terminal of the speaker as far as they will go. Ensure that
the cords are secure by gently pulling on them one at a time.
Note
Tip
• When removing the speaker cords from the speaker terminals, pull out the speaker cords while pressing the
white button on the speaker terminal with a tool such as a flathead screwdriver.
35US

[4-109-708-14(1)]
specdef v20080116

Use the baffle cover (short) for the front speaker and center speaker, baffle cover (long) for the
surround speaker. Press the ends of the baffle cover over the pin(s), then press down to flush fit
Getting Started
the speaker front.

“J” mark
Baffle cover (long)
Center speaker
36US

[4-109-708-14(1)]
specdef v20080116
6 Attach the bracket (bottom) to the speaker.

Insert the bracket (bottom) into the speaker tightly.
Getting Started
Ex. Front speaker
Bracket (bottom)
Speaker cord
Note
• When attaching the bracket, take care not to catch the speaker cord between the speaker and bracket.
7 Attach the bracket (top) to the speaker.
Insert the bracket (top) into the speaker and secure it with the screw (supplied).
Screw
Bracket (top)
Right side
Center speaker
Note
37US

[4-109-708-14(1)]
specdef v20080116
8 Secure the speaker to the wall.

Check the horizontal and vertical position and tightly attach the speaker to the wall (making sure
the wall is sufficiently thick) using two suitable screws for each bracket (not supplied) in order 1
Getting Started
and 2.
2
Center speaker
1
2
1
Front/Surround speaker
Note
• When attaching the speaker, take care not to catch the speaker cord between the speaker and the wall.
9 Attach the bracket cover to the speaker.

Slide the bracket cover from the front of the speaker.
Bracket cover
Center speaker
38US

[4-109-708-14(1)]
specdef v20080116
Getting Started
Center speaker
Grille
Grille
“SONY” mark
“SONY” mark
Note
39US

[4-109-708-14(1)]
specdef v20080116
BDV-IS1000
1 Prepare screws (not supplied) that are suitable for the holes of the bracket.
2
Getting Started
Secure the bracket to the wall using hole 1.
3 4
Tip
• To prevent the speaker from rotating, use the hole 2, too.
3 Remove the rear cap using the wrench (supplied), and remove the speaker pedestal
using a screwdriver (+) (not supplied).
Wrench (supplied)
Rear cap
Screw
Note
• The removed screw is used in a later Step. Be sure not to lose the screw.
40US

[4-109-708-14(1)]
specdef v20080116
4 Push A with the supplied wrench (1), and then remove the speaker cords (2).
Getting Started
(2)
(1) A
When the lever is down, the When the lever is up, the
speaker cords are locked. speaker cords can be removed.
5 Thread the speaker cords through hole 3.
6 Reconnect the detached speaker cords, matching 3/# to the appropriate speaker
terminals (1), and then push the lever down completely (2).
(2)
(1)
Tip
• If it is difficult to push the lever down, use the wrench (supplied).
41US

[4-109-708-14(1)]
specdef v20080116
7 Reattach the rear cap using the wrench (supplied).

Getting Started
8 Secure the speaker to the bracket with the screw in Step 3 using hole 4.
42US

[4-109-708-14(1)]
specdef v20080116
Step 3: Connecting the System
Getting Started
See the connection diagram below, and read the additional information from 1 to 8 on the following
pages.
Note
• Be sure to make connections securely to avoid hum and noise.
• When you connect another component with a volume control, turn up the volume of the other components to a level
where sound is not distorted.
BDV-IT1000ES
3 DIGITAL MEDIA 3 Set-top box/digital satellite
2 TV PORT adapter receiver, VCR, or PlayStation,
etc.
4 AM loop antenna (aerial)

6 External 5 Wireless
memory transceiver
4 FM wire antenna (aerial)
8 AC power cord (mains lead)

7 Network HDMI S-AIR
1 Center speaker
1 Subwoofer
1 Front left speaker (L) 1 Front right speaker (R)
5 Wireless
transceiver
Surround amplifier
8 AC power cord
(mains lead)
1 Surround left speaker (L) 1 Surround right speaker (R)

:Signal flow
43US

[4-109-708-14(1)]
specdef v20080116
BDV-IS1000
3 DIGITAL MEDIA 3 Set-top box/digital satellite
2 TV PORT adapter receiver, VCR, or PlayStation,
Getting Started
etc.
4 AM loop antenna (aerial)

6 External 5 Wireless
memory transceiver
4 FM wire antenna (aerial)
8 AC power cord (mains lead)

7 Network HDMI S-AIR
1 Front left speaker (L) 1 Center speaker 1 Front right speaker (R)
1 Subwoofer
5 Wireless
transceiver
Surround amplifier
8 AC power cord
(mains lead)
1 Surround left speaker (L) 1 Surround right speaker (R)

:Signal flow
44US

[4-109-708-14(1)]
specdef v20080116
1 Connecting the Speakers
Getting Started
Front/center speakers and subwoofer for BDV-IT1000ES
When connecting speaker cords to the unit, insert the connector until it clicks.

Y PB/ PR/ IN
CB CR
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / CB PR / C R
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
To the subwoofer (purple)
To the center speaker (green)
ER
R WOOF
KE
EA E N T E R
SP C
NT
FROL
NT
FRO
R
To the front right speaker (R) (red)
To the front left speaker (L) (white)
When connecting the speaker cords to the subwoofer, use the speaker cords (purple). Be sure to match
the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to
3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation in the
speaker terminals.
Rear of the subwoofer
Connector (purple)
#
3
Color tube (purple)
45US

[4-109-708-14(1)]
specdef v20080116
Front/center speakers and subwoofer for BDV-IS1000

When connecting to the unit, insert the connector until it clicks.
Getting Started

COMPONENT VIDEO OUT VIDEO OUT TV OPTICAL SAT/CABLE DIGITAL
Y PB/ PR/ IN
CB CR
VIDEO S-VIDEO COAXIAL
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / C B PR / CR
SAT/CABLE
LAN(100)
EXTERNAL
FM
FRONT FRONT CENTER WOOFER WOOFER AUDIO IN MIC
R L 1 2 DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
To the subwoofer (yellow)
To the subwoofer (purple)
R
OFE
WO 2
OF ER
ER WO 1
AK N T E R
S PE CE
NT
FROL
NT
FRO
R
To the front right speaker (R) (red) To the center speaker (green)
To the front left speaker (L) (white)
The speaker cords (yellow and purple) are connected to the subwoofer beforehand as follows. When
re-connecting, be sure to match the speaker cords to the appropriate terminals on the speakers: the
speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch
the speaker cord insulation in the speaker terminals.
Connector (yellow)
#
3
Color tube
(yellow)
Connector (purple) 3
Color tube
(purple)
Rear of the subwoofer
46US

[4-109-708-14(1)]
specdef v20080116
Surround speakers
Rear panel of the surround amplifier
Getting Started
EZW-RT10
SP
EA
KE
R
S-AIR ID SPEAKER
A
B
C
L
To the surround left speaker (L) L
PAIRING
SURROUND SELECTOR R
(blue)
SURROUND
SURROUND
BACK
R
To the surround right speaker (R) (gray)
About the speaker cords of the front/center speakers and subwoofer

You can remove the speaker cords from the connector. With the catch facing down, press and hold the
connector down against a flat surface (1) and remove the speaker cords from the connector (2).
(1)
(2)
Catch
When attaching the speaker cords to the connector, be sure to match the polarity of the speaker cords
and the connector.
3
Connector
Note
• Short-circuiting of the speakers may damage the system. To prevent this, make sure the bare wire of each speaker
cord does not touch another speaker terminal or the bare wire of another speaker cord.
• Be sure to match the speaker cords to the appropriate speaker terminals: 3 to +, and # to –. If the cords are
reversed, the sound will lack bass and may be distorted.
47US

[4-109-708-14(1)]
specdef v20080116
2 Connecting the TV
Getting Started
Use the parts as follows:

• Video cord (1)
To listen to TV sound from the six speakers of the system, connect the TV and the system with the
audio cord (not supplied) (A).
For video output to your TV, check the video input jacks of the TV, and select connection method A,
B, C, or D. Picture quality improves in order from A (standard) to D (HDMI).
When the TV has the digital optical output jack, you can improve sound quality by connecting with the
digital optical cord (not supplied) (B).
Component video cord S video cord Digital optical cord

(not supplied)* (not supplied) (not supplied)
Green
Blue
Red
DIGITAL
OUT BLE IN
VIDEO SAT/CA
T VIDE O OUT TV OPTICAL
CO MPONEN
PB /
PR/
CR S-VIDE
O
COAXIAL
Y CB VIDEO
To the S video input jack To the digital optical output

To the component video input jacks of of the TV jack of the TV
the TV
COMPONENT VIDEO OUT VIDEO OUT IR REMOTE

TV SAT/CABLE DIGITAL
(Ex. BDV-IT1000ES)
OPTICAL
Y PB/ PR / IN
CB CR
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / C B PR / CR
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
Video cord Audio cord HDMI** cable

(supplied) (not supplied) (not supplied)
White
OUT
VIDEO Red
O
S-VIDE
VIDEO
L OUT
R
TV
IN
AUDIO
To the video input jack of

the TV
To the HDMI IN jack of the TV
To the audio output jacks of the TV
* If your TV accepts progressive format signals, make this connection.

** HDMI (High-Definition Multimedia Interface)
If your TV has the HDMI jack, make this connection.
48US

[4-109-708-14(1)]
specdef v20080116
About the HDMI connection

If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.
If you connect a Sony TV that is compatible with the Control for HDMI function (page 95), operation
Getting Started
is simplified (ex. ONE-TOUCH PLAY: With one touch of the button, the connected TV turns on and
the input selector on the TV is switched to the system automatically). For details, see “Using the
Control for HDMI Function for “BRAVIA” Sync” (page 95).
Note
• Be sure to use only an HDMI cable that bears the HDMI logo.
• When connecting the HDMI cable, make sure that the direction of jacks are the same.
.
To connect to a TV with DVI input

Use an HDMI-DVI converter cable (not supplied). The DVI jack does not accept audio signals;
therefore, the sound is not output from a TV.
Furthermore, you cannot connect the HDMI OUT jack to DVI jacks that are not HDCP compliant (e.g.,
DVI jacks on PC displays).
49US

[4-109-708-14(1)]
specdef v20080116
3 Connecting the other components

Getting Started
You can enjoy the connected component(s) using the six speakers of the system.
• Set-top box/digital satellite receiver, VCR, or PlayStation, etc. (without HDMI OUT jack): 1
• Set-top box/digital satellite receiver or PLAYSTATION®3, etc. (with HDMI OUT jack): 2
• DIGITAL MEDIA PORT adapter: 3
1 Audio connection
A Audio cord B Digital optical cord
(not supplied) (not supplied)
White
Red
2 HDMI cable B Digital coaxial cord
(not supplied) R
L
(not supplied)
AUDIO IN
ABLE
VIDEO SAT/C
IN 2 E DIGITAL
IN 1 BL IN
SAT/CA
TV OPTICAL
HDMI COAXIAL
To the audio output jacks of the

component or
To the digital optical output jack of the component

To the HDMI OUT jack
of the component To the digital coaxial output jack of the component

P B/ PR/ IN
(Ex. BDV-IT1000ES)
Y CB CR
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / CB PR / C R
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
1 Video connection 3
ORT
B Component video cord A Video cord DMP
DC5V A
700m
(not supplied) (not supplied) MAX
Green
Blue
Red R
L
IN AUDIO
ABLE
VIDEO SAT/C
PR / CR
PB / C B
Y
BLE DIGITAL MEDIA PORT
SAT/CA DEO IN
ENT VI
COMPON adapter
To the video output

jack of the component
To the component video output jacks of
the component
50US

[4-109-708-14(1)]
specdef v20080116
Connection 1 (SAT/CABLE jacks)

You need to make both video and audio connections.
For video connection, check the video output jacks of the component, and select a connection method.
Getting Started
B (component) offers the better picture quality than A (standard).
For audio connection, connect the audio cords (A). If the component has a digital optical or coaxial
output jack, you can improve sound quality by connecting with the digital cord (B).
Note
• The system can accept both digital and analog signals. Digital signals have priority over analog signals. (COAXIAL
has priority over OPTICAL.) If the digital signal ceases, the analog signal will be processed after 2 seconds.
Connection 2 (HDMI IN1/2 jacks)

When connecting the system and the component using an HDMI cable, you can enjoy high quality
digital pictures and sound through the HDMI IN1 or 2 jack. You can connect up to two components.
Note
• When connecting the HDMI cable, make sure that the direction of jacks are the same.
.
Connection 3 (DMPORT jack)

Connect a DIGITAL MEDIA PORT adapter (not supplied) to the DMPORT jack. For details, see
“Using the DIGITAL MEDIA PORT Adapter” (page 88).
Note
• Connect the DIGITAL MEDIA PORT adapter so that the V marks are aligned. When disconnecting, pull out while
pressing A.
51US

[4-109-708-14(1)]
specdef v20080116
Relationship between input and output video signal

The relationship between input and output video signal for each function is as follows.
Getting Started
Jack(s) that accept Jack(s) where video signal is output

Function video signal input
VIDEO OUT VIDEO OUT COMPONENT
HDMI OUT
(VIDEO) (S VIDEO) VIDEO OUT
“BD/DVD” None (only video signal a* a* a* a
“TUNER FM” output)
“TUNER AM”
“SAT/CABLE” SAT/CABLE IN a – – a
(VIDEO)
COMPONENT VIDEO – – a a
IN (SAT/CABLE)
“DMPORT” DMPORT a – – a
“HDMI1” HDMI1, HDMI2 – – – a
”HDMI2”
a: Video signals are output.

–: Video signals are not output.
* Depending on the setting of the video output resolution, video signals may be not output. For details, see “Video
Output Resolution” (page 134).
Relationship between input and output audio signal

The relationship between input and output audio signal for each function is as follows.
Jack(s) that accept Jack(s) where audio signal is output

Function audio signal input
SPEAKER and
SPEAKER
HDMI OUT
“BD/DVD” None (only audio signal a *
output)
“TUNER FM” None (only audio signal a –
“TUNER AM” output)
“TV’ DIGITAL IN (TV a –
OPTICAL)
TV (AUDIO IN R/L) a –
“SAT/CABLE” DIGITAL IN (SAT/ a –
CABLE OPTICAL,
COAXIAL)
SAT/CABLE IN a –
(AUDIO R/L)
“DMPORT” DMPORT a –
“HDMI1” HDMI1, HDMI2 a *
”HDMI2”
a: Audio signals are output.

–: Audio signals are not output.
* You can output sound from both the system’s speakers and TV speaker if you connect the system and TV with an
HDMI cable (not supplied). To output sound from the HDMI OUT jack, set [Audio (HDMI)] in [HDMI Settings]
to [TV+AMP]. If the TV has stereo speakers, the sound output from the system’s speakers will also be stereo, even
if you play a multi-channel source. For details on [Audio (HDMI)], see page 115.
52US

[4-109-708-14(1)]
specdef v20080116
4 Connecting the antenna (aerial)
Getting Started
NNA
ANTE
75
L
COAX
IA
FM wire antenna (aerial)
(supplied)
FM
or

COMPONENT VIDEO OUT VIDEO OUT IR REMOTE
Y PB/
CB
PR /
CR
TV OPTICAL SAT/CABLE DIGITAL
IN
COAXIAL
(Ex. BDV-IT1000ES)
VIDEO S-VIDEO OUT IN
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / C B PR / C R
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
AM loop antenna (aerial)

(supplied)
A
AM
B
Note
• Cord (A) or cord (B) can be connected to either
terminal.
Note
• Keep the AM loop antenna (aerial) and cord away from the system or other AV components, as noise may result.
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial) as shown below.
Outdoor FM antenna (aerial) Unit

ANTENNA
75 COAXIAL
FM
53US

[4-109-708-14(1)]
specdef v20080116
5 Inserting the wireless transceiver

Getting Started
You can transmit sound from the unit to an S-AIR product, such as a surround amplifier or S-AIR
receiver.
An S-AIR product is a component that is compatible with the S-AIR function.
To use the S-AIR function, you need to insert the wireless transceivers into the unit, surround amplifier,
and S-AIR receiver.
For details of the S-AIR function, see “Using an S-AIR Product” (page 89).
Rear panel of the unit (Ex. BDV-IT1000ES) Rear panel of the

surround amplifier
Y PB/ PR/ IN
CB CR
VIDEO S-VIDEO OUT IN COAXIAL EZW-RT10

IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / C B PR / CR
SAT/CABLE
LAN(100)
75 COAXIAL
DC5V 500mA MAX S-AIR ID SPEAKER
EXTERNAL A
B
C
FM L
SPEAKER TV R L A.CAL PAIRING
R L DMPORT
ECM-AC2
DC5V SURROUND SELECTOR
700mA R
R L SURROUND
MAX SURROUND
AUDIO
AM BACK
VIDEO SAT/CABLE IN
T10
EZW-R
T10
EZW-R
Wireless Wireless
transceiver transceiver
Note
• When you insert the wireless transceiver, make sure that the AC power cord (mains lead) is not connected to a wall
outlet (mains).
• Do not touch the terminals of the wireless transceiver.
• Insert the wireless transceiver with the S-AIR logo facing up.
• Insert the wireless transceiver so that the V marks are aligned.
• Do not insert other than the wireless transceiver into the EZW-RT10 slot.
54US

[4-109-708-14(1)]
specdef v20080116
6 Inserting the external memory
Getting Started
Insert the external memory (local storage) (not supplied: USM1GH (as of April 2008)) into the
EXTERNAL slot. By connecting an external memory, you can enjoy additional contents (BonusView/
BD-Live) depending on the disc.
Rear panel of the unit (Ex. BDV-IT1000ES)

Y PB/ PR/ IN
CB CR
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / C B PR / CR
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
USM1GH
(as of April 2008) DC5V
EXT 500mA MA
ERN X
AL
With the terminal

side up
Note
• Insert the external memory in the V direction into the EXTERNAL slot as far as it will go.
• Check that “EXT” lights up in the front panel display when turning the system on.
To enjoy BonusView/BD-Live
See “Enjoying BonusView/BD-Live” (page 69).
To remove the external memory

1 Press "/1 to turn the system off.
2 Pull out the external memory from the EXTERNAL slot.
Note
• Insert the external memory straight. If you force the external memory into the slot, this will cause damage to both
the external memory and the unit.
• Keep the external memory away from small children to prevent them from accidentally swallowing the external
memory.
• Do not apply too much pressure to the external memory in the slot, as it may cause a malfunction.
• Use the USM1GH (as of April 2008) external memory only.
• To avoid data corruption or damage to the external memory, turn the system off when inserting or removing the
external memory.
• Do not insert the external memory that contains photo or music files to avoid corrupting the external memory data.
55US

[4-109-708-14(1)]
specdef v20080116
7 Connecting to the network

Getting Started
Connect the LAN (100) terminal of the unit to your Internet source using a network cable to update the
system’s software using the network. You can also enjoy BD-Live (page 69).
Make the appropriate settings in [Internet Settings] under [Network Settings] (page 117).
COMPONENT VIDEO OUT VIDEO OUT IR REMOTE TV SAT/CABLE DIGITAL

OPTICAL
(Ex. BDV-IT1000ES)
Y P B/ PR/ IN
CB CR
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / CB PR / CR
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
When connecting to a When connecting via a wireless

broadband router directly LAN router
Network cable
(not supplied) Wireless LAN router
Network cable LAN(100)
(access point)
Broadband router
(not supplied)
Ethernet/wireless
To PC LAN media converter
(not supplied)
Network cable Network cable
To PC
ADSL modem/ ADSL modem/

Cable modem Cable modem
Internet Internet
To update the system’s software using the network

See [Network Update] (page 108) and [Software Update Notification] (page 116).
To enjoy BD-Live
See “Enjoying BonusView/BD-Live” (page 69).
Note
• Do not connect a phone line to the LAN (100) terminal, as it may cause a malfunction.
• Depending on the modem or router, the type of network (LAN) cable, straight or crossing, differs. For details on
the network (LAN) cables, refer to the operating instructions supplied with the modem or router.
• Do not connect the LAN terminal of the unit to the LAN terminal of the PC.
• For optimal performance of BD-Live functions, we recommend using an Internet connection with an effective
speed of 1 Mbps or greater.
56US

[4-109-708-14(1)]
specdef v20080116
8 Connecting the AC power cords (mains leads)
Getting Started
Before connecting the AC power cords (mains leads) of the unit and the surround amplifier to a wall
outlet (mains), connect the front, center speakers and subwoofer to the unit and surround speakers to
the surround amplifier.
Rear panel of the unit (Ex. BDV-IT1000ES)

Rear panel of the
COMPONENT VIDEO OUT VIDEO OUT IR REMOTE TV SAT/CABLE DIGITAL
surround amplifier
OPTICAL
Y PB/ PR/ IN
CB CR
VIDEO S-VIDEO OUT IN COAXIAL EZW-RT10

IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / C B PR / CR
SAT/CABLE
LAN(100)
75 COAXIAL
DC5V 500mA MAX S-AIR ID SPEAKER
EXTERNAL A
B
C
FM L
SPEAKER TV R L A.CAL PAIRING
R L DMPORT
ECM-AC2
DC5V SURROUND SELECTOR
700mA R
R L SURROUND
MAX SURROUND
AUDIO
AM BACK
VIDEO SAT/CABLE IN
To the wall outlet (mains) To the wall outlet (mains)
57US

[4-109-708-14(1)]
specdef v20080116
To check the transmission status

Step 4: Setting up the You can check the status of sound transmission
between the unit and surround amplifier by
Wireless System
Getting Started
checking the POWER / ON LINE indicator of

To use the wireless system, you need to set up
the surround amplifier. Before setting, make
POWER / ON LINE Status
sure that the wireless transceivers are inserted indicator
into the unit and the surround amplifier correctly Turns green. Sound transmission is
(page 54). established.
This wireless system is called “S-AIR.” For Flashes green. Sound transmission is not
details of the S-AIR function, see “Using an established.
S-AIR Product” (page 89). For details, see “Surround
"/1 amplifier operation”
(page 128).
Turns red. The surround amplifier does
HDMI S-AIR
not output sound.

For details, see “Surround
amplifier operation”
(page 128).
POWER / ON LINE Turns off. The surround amplifier turns
Indicator off or its protection is active.
POWER S-AIR ID switch For details, see “Surround
amplifier operation”
POWER
EZW-RT10
(page 128).
S-AIR ID SPEAKER
POWER/ON LINE A
B
C
L
To enjoy the sound by using

PAIRING
PHONES SURROUND SELECTOR R

SURROUND
SURROUND
BACK
headphones
PHONES jack SURROUND
You can enjoy the system’s sound in a place
SELECTOR switch apart from the unit by connecting the
headphones to the PHONES jack on the
The unit transmits sound to the surround
surround amplifier.
amplifier that is connected to the surround
speakers. To establish sound transmission, Note
perform the following Steps. • When you connect headphones to the surround
amplifier, neither the unit nor the surround amplifier
1 Press "/1 on the unit. outputs sound from the system’s speakers.
The system turns on. • The volume of the unit may become minimum if you
2 Make sure that the SURROUND
turn off the surround amplifier while the headphones
are connected to the surround amplifier, or radio
SELECTOR switch of the surround
reception is poor. In this case, “HP NO LINK” and
amplifier is set to SURROUND. “VOLUME MIN” appear alternately in the front
3 Set the S-AIR ID switch of the surround panel display. Check radio reception, and set the
amplifier to A. volume again.
4 Press POWER on the surround When you use multiple S-AIR

amplifier. products
The POWER / ON LINE indicator turns You can prevent miss transmission between the
green. If not, check the transmission status S-AIR products by setting a different ID for each
as follows. S-AIR product. For details, see “Establishing
sound transmission between the unit and S-AIR
sub unit (ID setting)” (page 89).
58US

[4-109-708-14(1)]
specdef v20080116
To prevent transmission from 2 Insert the tabs of the speaker cord

your neighbors holder in the slots of the speaker cord
To prevent the transmission from neighbors, you cover, and press it into place.
Getting Started
can identify the unit and the surround amplifier Speaker cord holder
by performing the pairing operation. For details,
see “Identifying the unit with a specific S-AIR
sub unit (Pairing operation)” (page 92).
To use the surround amplifier for

the surround back speakers
You can enjoy 7.1 surround sound with the
surround back speakers by purchasing the Surround amplifier
additional surround amplifier.
To use the surround amplifier for the surround
back speakers, connect the surround back m
speakers (not supplied) to the surround
amplifier, set the SURROUND SELECTOR
switch to SURROUND BACK, and make the
S-AIR setting for the surround amplifier. For
details, see “Using an S-AIR Product”
(page 89).
To attach the cover to the

surround amplifier
After connecting and setting, you can attach the
Note
cover to the surround amplifier for organizing
• When detaching, remove the speaker cord holder,
and storing excess speaker cords. then remove the speaker cord cover. To remove the
1 Attach the speaker cord cover by speaker cord holder, slightly press the catch of the
sliding it down along the grooves along holder and lift off. To remove the speaker cord cover,
the edges of the surround amplifier. slightly splay open the edges of the cover and slide
down.
Speaker cord cover • Do not use excessive force to store the cords.
Surround amplifier
Grooves
Push the speaker cord cover down until you

hear a click. Turn the surround amplifier
upside down, then store the cords in the
speaker cord cover.
59US

[4-109-708-14(1)]
specdef v20080116
4 Press X/x to select a language.

Step 5: Performing the The system displays the menu and subtitles
in the selected language.
Easy Setup
Getting Started
5 Press or c.
Follow the Steps below to make the basic The setting message appears.
adjustments for using the system.
Displayed items vary depending on the country
model.
"/1
1 2 3
4 5 6
7 8 9
0
This message appears only for the fist initial

setting. It does not appear in the [Easy
Setup] in [Setup] setting.
C/X/x/c,
6 Press or c.
HOME The Setup Display for video cable selection
appears.
Easy Setup - TV connection Method
Select the video cable connecting this unit and the TV.
Component Video
1
Video or S Video
Turn on the TV.
2 Press [/1 on the unit, and POWER on
3 Switch the input selector on your TV so
7 Press X/x to select the cable used to
that the signal from the system
appears on the TV screen. connect the unit and TV.
The Easy Setup Display for OSD language Check the connection of the unit and TV
selection appears. (page 48).
• When you connect the unit and TV with
Easy Setup - OSD
the HDMI cable, select [HDMI], go to
Step 8 and set the video output resolution
Select the language to be displayed by this unit.
for matching your TV.
English
Français • When you connect the unit and TV with
Español
Português the component video cord, select
[Component Video], go to Step 8 and set
the video output resolution for matching
your TV.
If the Easy Setup Display does not • When you connect the unit and TV with
appear the video or S video cord, select [Video or
Recall the Easy Setup Display. See “To S Video] and go to Step 9.
recall the Easy Setup Display” (page 63).
60US

[4-109-708-14(1)]
specdef v20080116
Note Note
• When you do not connect the unit and TV with • If the picture is distorted or no picture appears,
the HDMI cable, you cannot select [HDMI]. wait for about 30 seconds without pressing any
Getting Started
• When connecting the HDMI OUT jack and buttons. [Is this resolution OK?] appears. Select
other video output jacks at the same time, select [Cancel]. The display returns to the resolution
[Component Video]. setting screen.
• For details about video output resolution, see • If the selected video output resolution is
“Video Output Resolution” (page 134). incorrect, no picture appears on the screen. In
this case, press and hold H and A on the unit
8 Press or c. for more than 5 seconds to reset the video output
The Setup Display for video output resolution to the lowest resolution. To change
resolution selection appears. For details, see the video output resolution, set [Output Video
[Output Video Format] (page 110). Format] in [Video Settings] (page 109).
When you select [HDMI] in Step 7 9 Press or c.

The Setup Display for selecting the aspect
Easy Setup - HDMI Resolution ratio of the TV to be connected appears.
Select the resolution to output to the TV. "Auto" is the standard selection.
The video switches for 30 seconds when this setting is changed.
Check that there are no problems with the video.
Nothing is displayed on the screen if the resolution is incorrect. Easy Setup - TV Type
Auto
Select the screen aspect ratio to match your TV.
Select from [Auto], [480i], [480p], [720p],

[1080i], or [1080p].
When connecting the HDMI OUT jack and
other video output jacks at the same time,
10 Press X/x to select the setting that
matches your TV type.
video signals may not output from the jacks,
• [16:9]: If you have a wide-screen TV or a
other than from the HDMI OUT jack, when
4:3 standard TV with a wide-screen mode.
[Auto] or [1080p] is selected.
(page 109)
When you select [Component Video] in • [4:3]: If you have a 4:3 standard TV.
Step 7
(page 109)
Easy Setup - Component Resolution
Select the resolution to output to the TV.
11 Press or c.
The video switches for 30 seconds when this setting is changed.
Check that there are no problems with the video.
When you connect the unit and TV with
Nothing is displayed on the screen if the resolution is incorrect. the HDMI cable
The Setup Display for the [Control for
HDMI] function appears. Go to Step 12.
When you do not connect the unit and
TV with the HDMI cable
Select from [480i], [480p], [720p], or The Setup Display for [BD Internet
[1080i]. Connection] appears. Go to Step 14.
When you change the video

output resolution
A picture is displayed in the selected
resolution for about 30 seconds, then the
display asks for confirmation.
Follow the on-screen instructions and go to
the next step.
61US

[4-109-708-14(1)]
specdef v20080116
12 Press X/x to select the setting for the You can operate the player quickly after
Control for HDMI function. turning on this function.
Select [Quick Start] if you want to shorten
Getting Started
Easy Setup - Control for HDMI the startup time from the standby mode. The
You can operate this unit in conjunction with a TV connected by HDMI. default setting is [Normal].
Check your TV settings when using this function. Note
• Quick Start mode will increase electricity
On
consumption and activate the fan in the standby
mode.
17 Press or c.
Select [On] to use the [Control for HDMI] The Setup Display for [Auto Calibration]
function (page 95) when connecting Sony appears.
components that are compatible with the
Control for HDMI function. 18 Connect the calibration mic to the
If you do not use the [Control for HDMI] A.CAL MIC jack on the rear panel.
function, select [Off]. Set up the calibration mic at the ear level
using a tripod, etc. (not supplied). The front
13 Press or c.
of each speaker should face the calibration
The Setup Display for [BD Internet mic, and there should be no obstruction
Connection] appears. between the speakers and the calibration
14 Press X/x to select the setting for the mic.
BD Internet connections.
Y P B/ PR/ IN
CB CR
IN 1 IN 2 OUT
Y HDMI EZW-RT10
PB / CB PR / C R
SAT/CABLE
LAN(100)
EXTERNAL
FM
R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
L
A.CA
MIC
C2
ECM-A
Select [Allow] to allow Internet

connections.
If you do not allow the connections, select Calibration mic
[Do not allow].
15 Press or c.
The Setup Display for [Standby Mode]
appears.
16 Press X/x to select the standby mode. Ex. BDV-IT1000ES
62US

[4-109-708-14(1)]
specdef v20080116
19 Press X/x to select [OK]. To quit the Easy Setup

To cancel, select [Cancel]. Press HOME in any Step.
Getting Started
Note Tip
• Make sure that the headphones are not • If you change the position of the speakers, reset the
connected to the surround amplifier. You cannot speaker settings. See “Calibrating the Appropriate
operate the following steps with the headphones Settings Automatically” (page 98) and “Setting the
connected. Speakers” (page 100).
20 Press .
• If you want to change any of the settings, see
“Settings and Adjustments” (page 107).
[Auto Calibration] starts.
The system adjusts the speaker setting To recall the Easy Setup Display
automatically.
Be quiet during the measurement.
1 Press HOME.
The home menu appears on the TV screen.
Note
• Loud test sound is output when [Auto 2 Press C/c to select [Setup].
Calibration] starts. You cannot turn the volume
down. Give consideration to children and
3 Press X/x to select [Easy Setup], then
press .
neighbors.
• Before [Auto Calibration], install the surround 4 Press C/c to select [Start], then press
amplifier in the appropriate location. If you .
install the surround amplifier in an improper The Easy Setup display appears.
location, such as another room, proper
measurement will not be obtained.
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 1 minute), as it may interfere with
measurement.
• When you use the surround back speakers with
the optional surround amplifier, install the
speakers in appropriate location and turn the
surround amplifier on.
21 Confirm the conclusions of [Auto
Calibration].
The conclusions appear on the TV screen.
Press C/c to change the page. The first page
shows the distance of speakers. The second
page shows the level of speakers. If the
conclusions are ok, unplug the calibration
mic and press X/x to select [OK].
Note
• The environment of the room in which the
system is installed may affect measurements.
• If measurement fails, follow the message then
retry [Auto Calibration].
22 Press .
Easy Setup is finished. All connections and
setup operations are complete.
63US

[4-109-708-14(1)]
specdef v20080116
Function Source
Step 6: Enjoying Sound “HDMI1”/“HDMI2” Component that is
connected to the HDMI1
by Each Function
Getting Started
or 2 jack on the rear panel

(page 50)
You can enjoy BD/DVD, TV, Set-top box/ “DMPORT” DIGITAL MEDIA
digital satellite receiver, or VCR sound from all PORT adapter (page 88)
the speakers in this system.
Note
• When you use both the TV (AUDIO IN) jacks
(analog connection) and DIGITAL IN (TV) jack
1 2 3
(digital connection), or SAT/CABLE IN
4 5 6
7 8 9 (AUDIO) jacks (analog connection) and
0 DIGITAL IN (SAT/CABLE) jacks (digital
connection) at the same time, the digital
connection takes priority.
2 Press DECODING MODE repeatedly
until the decoding mode you want
appears in the front panel display.
FUNCTION When you want to output the TV sound or
stereo sound of a 2 channel source from the
six speakers, select the “PRO LOGIC,”
“PLII MOVIE,” or “PLII MUSIC”
decoding mode.
DECODING For details, see page 77.
MODE
Note
With the cover opened. • Depending on your TV, you may need to turn off your
TV’s speaker to enjoy surround sound of the system.
1 Press FUNCTION repeatedly until the
Tip
desired function appears in the front
• When listening to MP3 files or other compressed
panel display.
music using the DIGITAL MEDIA PORT adapter,
Each time you press FUNCTION, the you can enhance the sound.
function changes as follows. Press DECODING MODE repeatedly until “A.F.D.
STD” appears in the front panel display (page 77) and
“BD/DVD” t “TUNER FM” t set the sound mode (page 80) to “MOVIE,”
“TUNER AM” t “TV” t “SAT/ “MUSIC,” or “NEWS.”
To cancel, select other than “A.F.D. STD.”
CABLE” t “HDMI1” t “HDMI2” t
• When using the additional surround amplifier
“DMPORT” t …
(optional) with the surround back speakers (optional),
you can select “PLIIx MOVIE” and “PLIIx MUSIC”
Function Source for the decoding mode (page 77).
“BD/DVD” Disc that is played by the
system If distortion occurs in the sound
“TUNER FM”/ FM/AM radio (page 83)
of a connected component
“TUNER AM” You can reduce the input level for the connected
“TV” TV component. For details, see [Attenuate - TV]
(page 111) and [Attenuate - SAT/CABLE]
“SAT/CABLE” Component that is
connected to the SAT/
(page 111).
CABLE jacks on the rear
panel (page 50)
64US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb05ply.fm] masterpage:Right
specdef v20070110
4 Press FUNCTION repeatedly until “BD/

DVD” appears in the front panel
Playback display.
5 Press A.
Playing a BD/DVD 6 Load a disc.
Playback
Place one disc on the disc tray, and then
press A.
Depending on the disc, some operations may be

different or restricted.
Refer to the operating instructions supplied with
your disc.
"/1 H x FUNCTION A
FUNCTION VOLUME Z
HDMI S-AIR
When you insert a commercially available
BD-ROM or DVD VIDEO, playback
automatically starts depending on the disc.
Note
Disc tray VOLUME +/– • When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
ONE-TOUCH
PLAY not skewed on the inner circle of the tray.
"/1 • Do not forcibly press the disc tray closed with
A
1 2 3
your finger, as this may cause malfunction.
4 5 6
Number • Do not place more than one disc on the tray.
7 8 9
buttons
SUBTITLE
0 TIME 7 Press C/c to select [Video].
ANGLE
SCENE
SEARCH
8 Press X/x to select , then press H
DISPLAY or .
TOP MENU POP UP/
C/X/x/c, MENU
OPTIONS BD Data
HOME
FUNCTION ./> Video
/ H
m/M
X
MUTING
VOLUME x
+/–
A/V SYNC For commercially available BD-ROM or
DVD VIDEO, playback starts.
For a BD or DVD recorded on other
1 Turn on your TV.
equipment, the title list appears. Press X/x
2 Switch the input selector on the TV to to select , then press H or .
this system. Playback starts.
3 Press "/1. 9 Adjust the volume by using VOLUME
The system turns on. +/–.
The volume level appears on the TV screen
and in the front panel display.
65US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb05ply.fm] masterpage:Left
specdef v20070110
Note To Press
• Depending on the system status, the volume level Stop play and remove A
may not appear on the TV screen. the disc
• When you set the [Control for HDMI] function to
Locate a point quickly M or m while playing a
[On], the TV that is connected to the system with an
by playing a disc in fast disc. Each time you press
HDMI cable (not supplied) can be sync-operated with
forward or fast reverse M or m during scan,
the system. For details, see “Using the Control for
(Scan)1) the playback speed changes
HDMI Function for “BRAVIA” Sync” (page 95).
as follows:
Tip
• You can change the speed at which the volume is Playback direction
turned up and down. M1 (×10) t M2 (×30)
To turn the volume up/down quickly, press and hold t M3 (×120)
the VOLUME +/–. Reverse direction
To set the volume up/down precisely, press the n (×1) t m1 (×10) t
VOLUME +/– briefly. m2 (×30) t m3
(×120)
To turn the system off
Press "/1 while the system is on. The system When you press and hold
enters standby mode. the button, fast forward/fast
reverse continues at the
To save power in standby mode selected speed until you
Press "/1 while the system is on. release the button.
To enter power saving mode, make sure that the To return to normal speed,
system is in the following status. press H. Actual speeds
may differ with some discs.
– [Control for HDMI] is set to [Off] (page 95).
Replay the previous (instant replay) during
– [S-AIR Standby] is set to [Off] (page 92). scene2) playback.
– [Standby Mode] is set to [Normal] Briefly fast forward the (instant advance)
(page 116). current scene3) during playback.
To use the headphones 1)Scan speeds may differ with some discs.
Connect the headphones to PHONES jack on the 2)
BD/DVD VIDEO/DVD-RW/DVD-R only.
surround amplifier. The sound of the system is 3)
BD/DVD VIDEO/DVD-RW/DVD-R/DVD+RW/
muted. For details, see page “To enjoy the sound DVD+R only.
by using headphones” (page 58).
Note
Other operations • You may not be able to use the instant replay or
instant advance function with some scenes.
To Press
To play a restricted BD or DVD
Stop x
(Parental Control)
Pause X
When you play a restricted BD
Resume play after pause X or H
Change [BD Parental Control] in [BD/DVD
Go to the next chapter >
Viewing Settings] (page 112).
Go back to the . twice in a second.
preceding chapter When you play a restricted DVD
When you press . once,
you can go to the beginning Change [DVD Parental Control] in [BD/DVD
of the current chapter. Viewing Settings] (page 112).
Turn off the sound MUTING
temporarily To cancel, press it again or When you play a restricted BD or DVD, the
VOLUME + to adjust the display for entering your password appears on
sound volume. the screen.
66US

[4-109-708-14(1)]
specdef v20070110
Enter your four-digit password using the Available OPTIONS

number buttons, and press .
Playback starts.
1 Press OPTIONS.
To register or change the password, see The options menu appears.
[Password] (page 113). 2 Press X/x to select an item, then press
.
Playback
To play a restricted BD-RE or BD- The available items differ depending on the
R (Disc Lock) disc type or system situation.
When you play a BD-RE or BD-R restricted by
the Disc Lock function, the display for entering Items Details
your password appears on the screen. [Video Settings] Adjusts settings for picture
1 Enter the four-digit password that has (page 72).
been registered when creating the disc [Title List] Displays the title list.
using the number buttons, and press [Play] Plays the title from the
. point where you pressed x.
2 Select a title, and press H or . [Play from Beginning] Plays the title from the
beginning.
Playback starts.
[Top Menu] Displays the disc’s Top
One-Touch Play (for HDMI Menu (page 69).
connection only) [Menu/Popup Menu] Displays the BD-ROM’s
Pop-up Menu or DVD’s
Press ONE-TOUCH PLAY.
menu (page 69).
The system and the connected TV turn on and
the input selector on the TV is switched to the [Stop] Stops playback.
system, then you can enjoy the contents of a [Title Search] Searches for a title and
disc. starts playback from the
beginning (page 70).
Note
[Chapter Search] Searches for a chapter and
• When using the HDMI connection, there may be a
starts playback from the
delay before the playback picture appears on the
screen, and the beginning portion of the playback beginning (page 70).
picture may not be displayed.
• To use the this function, set [Control for HDMI] to
[On] in [HDMI Settings] (page 114).
67US

[4-109-708-14(1)]
specdef v20070110
Changing the angles Resuming playback from the

point where you stopped the
disc
If various angles (multi-angles) for a scene are
recorded on a disc, you can change the viewing (Resume Play)
angle.
Press ANGLE during playback to select the When you stop the disc, the system remembers
desired angle. the point where you pressed x. As long as you
Note do not remove the disc, Resume Play will work
• Depending on the disc, you may not be able to change even if the system is set to standby mode by
the angle even if multi-angles are recorded on the pressing "/1.
disc.
1 While playing a disc, press x to stop
playback.
Displaying the subtitles 2 Press X/x to select , then press H
or .
The system starts playback from the point
where you stopped the disc in Step 1.
If subtitles are recorded on a disc, you can turn
the subtitles on/off during playback. If Note
multilingual subtitles are recorded on the disc, • Depending on where you stop the disc, the system
may not resume playback from exactly the same
you can change the subtitle language during
point.
playback, or turn the subtitles on/off whenever
• The point where you stopped playing may be cleared
you want.
when:
Press SUBTITLE during playback to select – you open the disc tray.
the desired subtitle language. – you play another title.
– you change the settings on the system.
Note
• Depending on the disc, you may not be able to change – you disconnect the AC power cord (mains lead).
the subtitles even if multilingual subtitles are – you remove the external memory (for BD-ROMs).
recorded on the disc. You also may not be able to turn • This function may not work properly with some
them off. discs.
To play from the beginning of the

title
Press OPTIONS to select [Play from beginning],
then press . Playback starts from the
beginning of the title.
68US

[4-109-708-14(1)]
specdef v20070110
Using the BD’s or DVD’s menu Enjoying BonusView/BD-Live
To display Top Menu Some BD-ROMs have bonus contents and other
Playback
A BD/DVD is divided into a lot of sections, data that can be downloaded to the external
which make up a picture or music feature. These memory (local storage) for enjoyment.
sections are called “titles.” When you play a BD/ 1 Press "/1 to turn the system off.
DVD which contains several titles, you can
select the title you want using Top Menu. 2 Insert the external memory (not
You can also select items such as the language supplied) into the EXTERNAL slot on
for the subtitles and the language for the sound the rear of the unit.
using Top Menu. The external memory is used as the local
storage.
1 Press TOP MENU.
Make sure that the external memory is
The disc’s menu appears on the TV screen. properly inserted into the unit (page 55).
The contents of the menu vary depending
on the disc. 3 Press "/1 to turn the system on.
2 Press C/X/x/c or the number buttons to 4 Insert a BD-ROM with BonusView/BD-

Live.
select the item you want to play or
change. The operation method differs depending on
the disc. Refer to the operating instructions
3 Press .
supplied with the disc.
To display Pop-up Menus
Some BD-ROMs contain Pop-up Menus that To delete data in the external
appear without interrupting playback. memory
1 Press POP UP/MENU during playback.
You can delete unnecessary data.
The Pop-up Menu appears. 1 Press HOME.
2 Press C/X/x/c, the color buttons, or 2 Press C/c to select [Video].

number buttons to select the item, and
follow the on-screen instructions.
3 Press X/x to select [BD Data], then
press .
4 Select the disc name, then press
OPTIONS.
5 Select [Erase], then press .
6 Select [OK], then press .
The data of the selected disc will be deleted.
Note
• Depending on the BD-ROM, the disc name may not
be displayed.
Tip
• To delete all data in the external memory at once,
select [Erase All] in Step 5.
• Press instead of OPTIONS in Step 4 to skip Step
5.
69US

[4-109-708-14(1)]
specdef v20070110
Searching for a scene quickly Searching for a Title/Chapter

(Scene Search)
You can search for a chapter if the title contains

You can move quickly between scenes within chapter marks.
the title currently being played back.
1 Press OPTIONS during playback or in
1 Press SCENE SEARCH during pause mode.
playback or in pause mode.
The options menu appears.
Playback pauses and a bar with a scene
indicator (square-shaped – indicates the 2 Press X/x to select a search method,
current point) appears at the bottom of the then press .
screen. • [Title Search] (for a BD-ROM/DVD
VIDEO): Searches the desired title.
2 Press and hold C/c or m/M to move
• [Chapter Search]: Searches the desired
the scene indicator to the scene you
are searching for. chapter.
The display for entering the number
Scene indicator appears.
Example: Chapter Search
Chapter :
Scene Search
The current point
The scene indicator on the bar is displayed

around the playing point.
3 Press the number buttons to enter the
number of the title or chapter.
3 Release the button at the point you If you make a mistake, press CLEAR, and
want to watch. re-enter another number.
The scene at which you released the button
is displayed in pause mode.
4 Press .
After a while, the system starts playback
To search for a scene again, move the scene
from the selected number.
indicator using C/c or m/M.
4 Press SCENE SEARCH, , H, or X. To cancel [Title Search]/[Chapter
Playback starts. Search]
Press RETURN.
To cancel Scene Search mode
Press SCENE SEARCH, , H, or X.
Playback starts from the point you pressed the
button.
Note
• The Scene Search function is available for titles
longer than 100 seconds and shorter than 100 hours.
• Depending on the disc, this function may not work.
70US

[4-109-708-14(1)]
specdef v20070110
To view the playing time and

Displaying the playing time remaining time in the front panel
and play information display
Press TIME repeatedly.
Each time you press TIME while playing the
Playback
disc, the display changes:
You can check the title information, including
1y2
the video transmission rate, etc.
Press DISPLAY during playback. 1 Playing time of the current title
The displayed information differs depending on 2 Remaining time of the current title
the disc type and system status.
Some displayed items may disappear after a few
Example: When playing a BD-ROM seconds.
Angle English Dolby Digital Plus
Mbps
A The current selected angle

B Title number or name
C The currently selected audio or subtitle setting
D Available functions ( angle/ audio/
subtitle)
E Playback information
Displays Disc type/Play mode/Video codec/
Bit rate/Playing status bar/Playing time
(Remaining time*)
F Output resolution/Video frequency
* Displayed when you press TIME repeatedly.
Tip
• You can also check the playback information in the
front panel display.
• Press SUBTITLE, AUDIO, or ANGLE, and you can
check each type of information.
71US

[4-109-708-14(1)]
specdef v20070110
Note
Adjusting pictures for videos • Set the picture setting of your TV to [Standard] before
changing [Picture Quality Mode].
• [Video Settings] is not available when the connected
TV is set to Theater Mode (page 96).
1 Press OPTIONS during playback. • Depending on the disc or the scene being played,
The options menu appears. [FNR], [BNR], or [MNR] effects may be hard to
discern.
2 Press X/x to select [Video Settings],
then press .
The [Video Settings] screen appears.
Video Settings
Select the item you want to change.

Close
Picture Quality Mode Standard
FNR
BNR Standard
MNR
3 Press X/x to select an item, then press

.
[Picture Quality Mode]
Optimizes the picture settings for different
lighting environments.
• [Standard]
• [Brighter Room]
• [Theater Room]
[FNR]
Reduces random noise appearing in the
picture.
• [Off]
• [Auto]
[BNR]
Reduces mosaic-like block noise in the
picture.
• [Off]
• [Auto]
[MNR]
Reduces minor noise around the picture
outlines (mosquito noise).
• [Off]
• [Auto]
4 Press C/X/x/c to select or adjust the
settings, then press .
To adjust any other items, repeat steps 3 and
4.
72US

[4-109-708-14(1)]
specdef v20070110
Adjusting the delay between Playing a CD

the picture and sound
(A/V SYNC)
Playback
When the sound does not match the pictures on
the TV screen, you can adjust the delay between A
1 2 3
the picture and sound. 4 5 6
1 Press A/V SYNC. 7 8

0
9
TIME
“A/V SYNC” appears in the front panel
display.
2 Press X/x to adjust the delay between
the picture and sound. C/X/x/c,
OPTIONS
You can adjust from 0 ms to 300 ms in 25 HOME
ms increments. FUNCTION ./>
Note
H
m/M
• Depending on the input stream, A/V SYNC may not X
be effective.
MUTING
x
VOLUME
+/–
1 Press FUNCTION repeatedly until “BD/

DVD” appears in the front panel
display.
2 Load a CD.
The Music Player screen appears.
3 Press H.
Playback starts.
Music CD
Stereo
Current track number and elapsed time
4 Adjust the volume by using VOLUME

+/–.
The volume level appears on the TV screen
and in the front panel display.
73US

[4-109-708-14(1)]
specdef v20070110
To select a track Available OPTIONS

1 Press HOME. 1 Press OPTIONS.
2 Press C/c to select [Music]. The options menu appears.
.
The available items differ depending on the
Music disc type or system situation.
Music CD
Items Details
[Play] Plays the selected track.
[Play from beginning] Plays the current track from
(during playback) the beginning.
3 Press . [Play from beginning] Plays the selected track
The music list appears. (in stop mode) from the beginning.
4 Press X/x to select a track, then press [Stop] Stops playback.
H or .
The system plays the selected track. Note
• The point where you stopped playing (resume point)
Other operations is cleared from memory when:
– You open the disc tray.
To Press – You turn the system off.
Stop x
To view the playing time and
Pause X
remaining time in the front panel
Resume play after pause X or H
display
Start playback from the H
point where you pressed Press TIME repeatedly.
x. Each time you press TIME while playing the
Go to the next track > disc, the display changes:
Go back to the . twice in a second. 1 t 2 t 3 t 4 t 1 t ...
preceding track When you press . once,
you can go to the beginning 1 Playing time of the current track
of the current track. 2 Remaining time of the current track
Turn off the sound MUTING. 3 Playing time of the disc
temporarily To cancel, press it again or 4 Remaining time of the disc
VOLUME + to adjust the
sound volume.
Stop play and remove A
the disc
Fast reverse/fast m or M during
forwards playback.
74US

[4-109-708-14(1)]
specdef v20070110
5 Press X/x to select , then press .

Playing Photo Files The file list or folder list appears.
1) 2) 3)
Playback
Photo
1)
BD-REs/BD-Rs containing JPEG image files
2)DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs
containing JPEG image files

3)CD-RWs/CD-Rs containing JPEG image files
Thumbnails of files*
* Appears only when the file has thumbnail

1 2 3
information.
4 5 6
7 8
0
9
6 Press X/x to select a file or folder, then
press .
DISPLAY When you select a folder, press X/x to
select a file in the folder, then press .
C/X/x/c, The selected photo file is displayed.
OPTIONS
HOME Other operations
FUNCTION ./>
H To Press
X Play a slideshow H
x
Stop a slideshow x
Pause a slideshow X
1 Press FUNCTION repeatedly until “BD/ Go to the next photo >
DVD” appears in the front panel Go back to the .
display. preceding photo
2 Load a disc that contains photo files. Display the file DISPLAY
information
3 Press HOME.
4 Press C/c to select [Photo]. Available OPTIONS for photo files
1 Press OPTIONS.
Photo 2 Press X/x to select an item, then press
Data CD .
The available items differ depending on the
situation.
Items Details
[Slideshow Speed]1)2) Changes the slideshow
speed.
• [Fast]
• [Normal]
• [Slow]
[Stop]1) Stops a slideshow.
75US

[4-109-708-14(1)]
specdef v20070110
Items Details To view best quality images

[Rotate Left]1) Rotates the photo If you have a Sony TV compatible with
counterclockwise by 90 “PhotoTV HD,” you can enjoy best quality
degrees. images by the following connection and setting.
[Rotate Right]1) Rotates the photo 1 Connect the unit to the TV using an
clockwise by 90 degrees. HDMI cable (not supplied).
[ViewImage]2) Displays the selected
picture.
2 Set the TV’s video setting to [VIDEO-A]
mode.
[Slideshow]2) Starts a slideshow.
For details on [VIDEO-A], refer to the
1)Appears when you press OPTIONS during playback operating instructions supplied with the
of photo files. TV.
2)
Appears when you press OPTIONS while the file/
folder list is displayed.
Note
• When you attempt to play the following photo files,
the mark appears on the screen and they cannot
be played.
– Photo files larger than 8,192 pixels (width or
height)
– Photo files smaller than 15 pixels (width or height)
– Photo files exceeding 32 MB
– Photo files with extreme aspect ratios (greater than
50:1 or 1:50)
– Photo files in Progressive JPEG format
– Photo files that have a “.jpeg” or “.jpg” extension,
but not in JPEG format
– Photo files that have an extremely long name
• The following photo files cannot be played.
– Photo files recorded on BD-Rs in any format other
than UDF (Universal Disk Format) 2.6
– Photo files recorded on BD-REs in any format
other than UDF (Universal Disk Format) 2.5
• The following photo files or folders cannot be
displayed in the file list or folder list.
– Photo files that have an extension other than
“.jpeg” or “.jpg”
– Photo files in the 5th tree or lower
– 501th or more folders when the total number of
folders and files in a single tree exceeds 500
• Photo files edited on a PC may not be played.
• Thumbnail images of some photo files may not be
displayed.
• Large photo files may take some time to display or to
start a slideshow.
76US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb06sou.fm] masterpage:Right
specdef v20070110
Sound Adjustment
Enjoying Surround Sound

You can enjoy surround sound simply by selecting one of the system’s pre-programmed decoding
modes. They bring exciting and powerful sound of movie theaters into your home.
Sound Adjustment
1 2 3
4 5 6
7 8 9
0
DECODING
MODE With the cover opened.
Press DECODING MODE repeatedly until the desired decoding mode appears in the front
panel display.
Display Decoding mode Effect

“A.F.D. STD” AUTO FORMAT Presents sound as it was recorded/encoded.
DIRECT Depending on the source, the speakers that output sound will vary.
STANDARD
“A.F.D. MULTI” AUTO FORMAT 2 channel source: Sound that is recorded in 2 channel (front left and
DIRECT MULTI right channel) is also assigned to the surround left and right channel.
This mode outputs sound from the front left and right speakers,
surround left and right speakers, and subwoofer. The center speaker
does not output any sound.
Multi channel source: Depending on the source, speakers that output
the sound will vary.
“PRO LOGIC” Dolby Pro Logic Performs Pro Logic decoding to the input signal and simulates
surround sound from 2 channel sources.
This mode outputs sound from all the speakers and subwoofer. Sound
may not be output from all speakers depending on the source.
“PLII MOVIE” Dolby Pro Logic II Performs Pro Logic II movie mode decoding to the input signal and
MOVIE produces five full-bandwidth output channels from 2 channel sources.
This setting is ideal for watching videos of overdubbed or old movies.
77US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb06sou.fm] masterpage:Left
specdef v20070110
Display Decoding mode Effect

“PLII MUSIC” Dolby Pro Logic II Performs Pro Logic II music mode decoding to the input signal and
MUSIC produces five full-bandwidth output channels from 2 channel sources.
This setting is ideal for normal stereo sources such as a CD.
“PLIIx MOVIE”1) Dolby Pro Logic IIx Performs Pro Logic IIx movie mode decoding to the input signal and
MOVIE produces 7.1 output channels. This setting is ideal for watching videos
of overdubbed or old movies.
Sound may not be output from all speakers depending on the source.
“PLIIx MUSIC”1) Dolby Pro Logic IIx Performs Pro Logic IIx music mode decoding to the input signal and
MUSIC produces 7.1 output channels. This setting is ideal for normal stereo
sources such as a CD.
Sound may not be output from all speakers depending on the source.
“NEO:6 CINEMA” dts NEO:6 Cinema Performs the DTS Neo:6 Cinema mode decoding to the input signal
and produces 6.1 output channels. This setting is ideal for watching
videos of overdubbed or old movies.
“NEO:6 MUSIC” dts NEO:6 Music Performs the DTS Neo:6 Music mode decoding to the input signal and
produces 6.1 output channels. This setting is ideal for normal stereo
sources such as a CD.
“2CH STEREO” 2 CHANNEL Outputs the sound from the front left and right speakers and
STEREO subwoofer. Multi channel surround formats are downmixed to 2
channels.
“HP THEATER”2)3) HEADPHONE Outputs the sound as surround from headphone left and right.
THEATER
“HP 2CH”2) HEADPHONE 2 Outputs the sound from headphone left and right. Multi channel
CHANNEL STEREO surround formats are downmixed to 2 channels.
1)
Appears only when you use the additional surround amplifier (optional) with the surround back speakers (optional)
(page 58).
2)Appears only when you connect headphones to the surround amplifier (page 58).
3)
BDV-IT1000ES only. DCS technology (page 80) is used.
To turn the surround effect off

Press DECODING MODE repeatedly until “A.F.D. STD” or “2CH STEREO” appears in the front
panel display and set the sound mode (page 80) to “MOVIE” or “MUSIC.”
Note
• When you select “A.F.D. MULTI,” depending on the disc or source, the beginning of the sound may be cut off as
the optimum mode is automatically selected. To avoid cutting the sound, select “A.F.D. STD.”
• When the input signal is multi channel source, “PRO LOGIC,” “PLII MOVIE,” “PLII MUSIC,” “NEO:6
CINEMA,” and “NEO:6 MUSIC” are canceled and the multi channel source is output directly.
• When the bilingual broadcast sound is input, “PRO LOGIC,” “PLII MOVIE,” and “PLII MUSIC” are not effective.
78US

[4-109-708-14(1)]
specdef v20070110
• “PRO LOGIC,” “PLII MOVIE,” “PLII MUSIC,” “PLIIx MOVIE,” “PLIIx MUSIC,” “NEO:6 CINEMA,” and
“NEO:6 MUSIC” are canceled when you set the sound mode (page 80) to the following setting.
– “SPORTS”
– “OMNI-DIR”
– “MOVIE-D.C.S.-” (BDV-IT1000ES only)
• Depending on the input stream, the decoding mode may not be effective. To activate the decoding mode, set [Fs
Limit] in [Audio Settings] (page 111) to [On].
• When changing the decoding mode while using the S-AIR receiver, sound from the S-AIR receiver may skip.
Sound Adjustment
Tip
• The system memorizes the last decoding mode selected for each function mode.
Whenever you select a function such as “BD/DVD” or “TUNER FM,” the decoding mode that was last applied to
the function is automatically applied again when it is returned to. For example, if you listen to “BD/DVD” with
“PRO LOGIC” as the decoding mode, then change to another function, and then return to “BD/DVD,” “PRO
LOGIC” will be applied again.
79US

[4-109-708-14(1)]
specdef v20070110
Note
Selecting the Sound • When you connect headphones to the surround

amplifier, SOUND MODE does not work.
Mode • Depending on the disc or source, when you select
“AUTO,” the beginning of the sound may be cut off
You can select a suitable sound mode for movies as the system selects the optimum mode
or music. automatically. To avoid cutting the sound, select
other than “AUTO.”
• Depending on the input stream, the sound mode may
not be effective.
1 2 3 • When changing the sound mode while using the
4 5 6
S-AIR receiver, sound from the S-AIR receiver may
7 8 9
0
skip.
Enjoying Digital Cinema Sound

(BDV-IT1000ES only)
SOUND About DCS (Digital Cinema

MODE
Sound)
In collaboration with Sony Pictures
Entertainment, Sony measured the sound
environment of their studios and integrated the
data of the measurement and the Sony DSP
Press SOUND MODE repeatedly during (Digital Signal Processor) technology to
playback until the desired mode appears in develop “Digital Cinema Sound.” “Digital
the front panel display.
Cinema Sound” simulates in a home theater an
• “AUTO”: The system selects “MOVIE” or ideal movie theater sound environment based on
“MUSIC” automatically to produce the sound the preference of the movie director.
effect depending on the disc or sound stream.
• “MOVIE”: The system provides the sound for About “MOVIE-D.C.S.-”
movies. “MOVIE-D.C.S.-” is ideal for enjoying movie
• “MUSIC”: The system provides the sound for software encoded with multi channel format,
music. such as the Dolby Digital DVD. This mode
• “SPORTS”: The system adds reverberation for reproduces the sound characteristics of Sony
the sports program. Pictures Entertainment’s studios.
• “NEWS”: The system provides the sound for “MOVIE-D.C.S.-” consists of the following
the voice program, such as news. three elements.
• “OMNI-DIR”: The system outputs the same • Virtual Multi Dimension
sound from all speakers; the same sound is The system creates five sets of virtual speakers
audible anywhere in the room. Multi channel surrounding the listener from a single pair of
surround formats are downmixed to two actual surround speakers.
channels. • Screen Depth Matching
• “MOVIE-D.C.S.-”*: The system reproduces In a movie theater, sound seems to come from
the sound characteristics of the Sony Pictures inside the image reflected on the movie screen.
Entertainment “Cary Grant Theater” cinema This element creates the same sensation in
production studio. your listening room by shifting the sound of
* BDV-IT1000ES only. DCS technology is used. the front speakers “into” the screen.
• Cinema Studio Reverberation
The system reproduces the reverberations
80US

[4-109-708-14(1)]
specdef v20070110
peculiar to a movie theater.
“MOVIE-D.C.S.-” is the integrated mode which

Changing the Sound
operates these elements simultaneously.
Note
• The virtual speaker effect may cause increased noise
1 2 3
in the playback signal. 4 5 6
• With decoding modes that use virtual speakers, you 7 8 9
Sound Adjustment
0
will not be able to hear any sound coming directly
from the surround speakers. AUDIO
Selecting the audio format,

multilingual tracks, or channel
When the system is playing a BD/DVD VIDEO
recorded in multiple audio formats (PCM,
Dolby Digital, MPEG audio, or DTS), you can
change the audio format. If the BD/DVD
VIDEO is recorded with multilingual tracks,
you can also change the language.
With a CD, you can select the sound from the
right or left channel and listen to the sound of the
selected channel through both the right and left
speakers.
Press AUDIO repeatedly during playback to
select the desired audio signal.
The audio information appears on the TV
screen.
x BD/DVD VIDEO
Depending on the BD/DVD VIDEO, the choice
of language varies.
When 4 digits are displayed, they indicate a
language code. See “Language Code List”
(page 139) to confirm which language the code
represents. When the same language is
displayed two or more times, the BD/DVD
VIDEO is recorded in multiple audio formats.
81US

[4-109-708-14(1)]
specdef v20070110
x DVD-VR
The types of sound tracks recorded on a disc are Enjoying multiplex broadcast
displayed.
Example:
Sound
• [ Stereo] (DUAL MONO)
• [ Stereo (Audio1)]
• [ Stereo (Audio2)] You can enjoy multiplex broadcast sound when
• [ Main] the system receives or plays the Dolby Digital
• [ Sub] multiplex broadcast signal.
• [ Main/Sub] Note
Note
• To receive the Dolby Digital signal, you need to
• [ Stereo (Audio1)] and [ Stereo (Audio2)] do not connect a TV or other component to the unit with an
appear when one audio stream is recorded on the disc. optical or coaxial digital cord (page 48) and set the
digital output mode of the TV or other component to
x CD Dolby Digital.
• [ Stereo]: The standard stereo sound. Press AUDIO repeatedly until the desired
• [ 1/L]: The sound of the left channel signal appears in the front panel display.
(monaural).
• “MAIN”: Sound of the main language will be
• [ 2/R]: The sound of the right channel output.
(monaural).
• “SUB”: Sound of the sub language will be
output.
• “MAIN/SUB”: Mixed sound of both the main
and sub languages will be output.
82US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb07rad.fm] masterpage:Right
specdef v20070110
1 Press FUNCTION repeatedly until

“TUNER FM” or “TUNER AM” appears
Tuner in the front panel display.
2 Select the radio station.
Listening to the Radio Automatic tuning
You can enjoy radio sound with the system’s Press and hold TUNING +/– until the auto
speakers. scanning starts.
[Auto Tuning] appears on the TV screen.
"/1 Scanning stops when the system tunes in a
Number station.
Tuner
1 2 3
4 5 6 buttons To stop the automatic tuning manually,
7 8 9
CLEAR 0 Color
press TUNING +/– or x.
buttons “TUNED” and “ST” (for stereo program)
(RED/ light up in the front panel display.
C/X/x/c, GREEN/
BLUE/ Manual tuning
YELLOW)
RETURN
OPTIONS Press TUNING +/– repeatedly.
HOME
FUNCTION
PRESET +/–
3 Adjust the volume by pressing
VOLUME +/–.
TUNING +/–
To turn off the radio
VOLUME x
+/– Press "/1.
TUNER DIRECT
MENU TUNING To change the AM tuning interval
DISPLAY (except for CIS and Middle
With the cover opened. Eastern models)
You can operate the tuner function by observing 1 Press FUNCTION repeatedly until
the following display on the TV screen. “TUNER AM” appears in the front panel
display.
Current station
Current band and preset number 2 Press and hold H and FUNCTION on
the unit until “AM 9k STEP” or “AM 10k
FM 7 STEP” appears in the front panel
display.
Tip
88.00 MHz • To improve reception, reorient the connected
SONY RADIO
antennas (aerials).
Station name
Tip
• You can operate the tuner function using the tuner
menu on the front panel display. See “Operating the
tuner function using the tuner menu” (page 86)
83US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb07rad.fm] masterpage:Left
specdef v20070110
Presetting radio stations Selecting the radio station by

You can preset 20 FM stations, and 10 AM
inputting the frequencies
stations. Before tuning, make sure to turn down directly
the volume to minimum.
When you know the frequencies, you can select
the radio station by inputting the frequencies
directly.
in the front panel display.
2 Press and hold TUNING +/– until the
auto scanning starts.
[Auto Tuning] appears on the TV screen.
Scanning stops when the system tunes in a 2 Press OPTIONS.
station. The options menu appears.
“TUNED” and “ST” (for stereo program) 3 Press X/x to select [Direct Tuning],
light up in the front panel display. then press .
3 Press OPTIONS. 4 Press the number buttons to select the
The options menu appears. frequencies.
4 Press X/x to select [Preset Memory], 5 Press .

then press . The setting is made.
5 Press X/x to select the preset number
you want.
If an FM program is noisy
6 Press .
The setting is made. If an FM program is noisy, you can select
monaural reception. There will be no stereo
To change the preset number
effect, but reception will improve.
Select the desired preset number by pressing
PRESET +/–, then perform the procedure from 1 Press OPTIONS.
Step 3. The options menu appears.
2 Press X/x to select [FM Mode], then
press .
Selecting the preset station
3 Press X/x to select [Monaural].
1 Press FUNCTION repeatedly until • [Stereo]: Stereo reception.
“TUNER FM” or “TUNER AM” appears • [Monaural]: Monaural reception.
The last received station is tuned in.
4 Press .
The setting is made.
2 Press PRESET +/– repeatedly to select
the preset station.
The preset number and frequency appear on
the TV screen and front panel display.
Each time you press the button, the system
tunes in one preset station.
Tip
• You can select the preset station number directly
by pressing the number buttons.
84US

[4-109-708-14(1)]
specdef v20070110
Buttons Details
Naming preset stations RED Switches the keyboard between
[Letter Type] alphabet and numbers.
You can enter a name for preset stations. These
GREEN Switches the keyboard between
names (for example, “XYZ”) appear in the front
[A/a] upper case and lower case.
panel display when a station is selected.
Only one name can be entered for each preset BLUE Displays the keyboard for
[Symbol] symbols.
station.
YELLOW The input is entered, and the
1 Press FUNCTION repeatedly until [Finish] system returns to the previous
“TUNER FM” or “TUNER AM” appears display.
in the front panel display. CLEAR Erases the character to the right
Tuner
The last received station is tuned in. [Clear]/[Clear All] of the cursor.

To erase all displayed characters,
press and hold CLEAR for 2
the preset station you want to create an
seconds or more.
index name for.
RETURN Returns to the previous display,
3 Press OPTIONS. [Cancel] canceling the input.
The options menu appears. C/X/x/c, • Select an input function using
4 Press X/x to select [Preset Name
C/X/x/c, and press .
• Enter characters as follows:
Input], then press .
1Select a character selection
The display for entering characters appears. panel using C/X/x/c, and press
To enter characters, see the following Steps. . 2Select a character using
C/c, and press .
To enter characters
Input FM preset name.
Clear Available OPTIONS for the

Clear All
Radio
Space 0 Cancel 1 Press OPTIONS.
Letter Type Symbol Finish
1 Press the number button repeatedly to .
select a character. The available items differ depending on the
Example: situation.
Press the number 3 button once to enter [D].
Items Details
Press the number 3 button three times to
enter [F]. [Preset Memory] Preset 20 FM stations, 10 AM
stations.
2 Press c, and enter the next character. [Direct Tuning] Input station frequency directly.
3 Press YELLOW ([Finish]) to finish. [Preset Name Enter a name for a preset station.
You can use the following buttons to enter Input]
characters. [FM Mode] Select monaural or stereo
reception of FM programs.
85US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb07rad.fm] masterpage:Left
specdef v20070110
6 Press X/x to select the preset number

Viewing the station name or you want.
frequency in the front panel TUNED ST
display
When the system is set to “TUNER FM” or Tip
“TUNER AM,” you can check the frequency • You can select the preset number directly by
pressing the number buttons.
using the front panel display.
Press DISPLAY.
7 Press .
“COMPLETE!” appears in the front panel
Each time you press DISPLAY on the remote,
display, and the station is stored.
the display changes as shown.
1 Station name* 8 Repeat Steps 2 to 7 to store other
2 Frequency** stations.
* This is displayed if you have entered a name for a
preset station.
9 Press TUNER MENU.
** Returns to the original display when several seconds The system menu turns off.
has elapsed.
To change the preset number
Select the desired preset number by pressing
Operating the tuner function PRESET +/–, then perform the procedure from
Step 3.
using the tuner menu
To listen to radio stations when
You can operate the tuner function using the you know the frequencies
tuner menu on the front panel display.
To preset radio stations “TUNER FM” or “TUNER AM” appears
2 Press DIRECT TUNING.
in the front panel display. 3 Press the number buttons to select the
2 Press and hold TUNING +/– until the frequencies.
auto scanning starts. 4 Press .
Scanning stops when the system tunes in a
Tip
station. “TUNED” and “ST” (for stereo • To improve reception, reorient the connected
program) light up in the front panel display. antennas (aerials).
3 Press TUNER MENU. If an FM program is noisy
4 Press X/x repeatedly until If an FM program is noisy, you can select
“MEMORY?” appears in the front panel monaural reception. There will be no stereo
display. effect, but reception will improve.
5 Press or c. 1 Press TUNER MENU.
A preset number appears in the front panel
display.
2 Press X/x repeatedly until “FM
MODE?” appears in the front panel
TUNED ST display.
TUNED ST
3 Press or c.
86US

[4-109-708-14(1)]
specdef v20070110
4 Press X/x to select “MONO.” 7 Press .

• “STEREO”: Stereo reception. “COMPLETE!” appears in the front panel
• “MONO”: Monaural reception. display, and the station name is stored.
5 Press . 8 Press TUNER MENU.
The setting is made. The system menu turns off.
6 Press TUNER MENU.
The system menu turns off.
To name preset stations

You can enter a name for preset stations. These
Tuner
names (for example, “ABC”) appear in the front
panel display when a station is selected.
Only one name can be entered for each preset
station.
The last received station is tuned in.
the preset station you want to create an
index name for.
3 Press TUNER MENU.
4 Press X/x repeatedly until “NAME IN?”
appears in the front panel display.
TUNED ST
5 Press or c.
6 Create a name by using C/X/x/c.
Press X/x to select a character, then press c
to move the cursor to the next position.
TUNED ST
You can input letters, numbers, and other

symbols for a radio station.
If you make a mistake

Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
87US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb08ext.fm] masterpage:Left
specdef v20070110
Playing the connected

External Audio Device
component on the system
Using the DIGITAL MEDIA 1 Press FUNCTION repeatedly until
PORT Adapter “DMPORT” appears in the front panel
display.
The DIGITAL MEDIA PORT (DMPORT) 2 Start playback of the connected
adapter (not supplied) is for enjoying sound component.
from a portable audio source or computer. By The sound and images from the connected
connecting a DIGITAL MEDIA PORT adapter, component are played on the system or
you can enjoy sound from the connected connected TV.
component on the system.
For operation details, refer to the operating
Available DIGITAL MEDIA PORT adapters
instructions of the DIGITAL MEDIA
vary in each area.
PORT adapter.
For details on connecting the DIGITAL MEDIA
PORT adapter, see “3 Connecting the other Tip
components” (page 50). • When listening to MP3 files or other compressed
music using a portable audio source, you can enhance
Note the sound. Select “A.F.D. STD” for the decoding
• Do not connect an adapter other than the DIGITAL mode (page 77) and set the sound mode (page 80) to
MEDIA PORT adapter. “MOVIE,” “MUSIC,” or “NEWS.” To cancel, select
• Do not connect or disconnect the DIGITAL MEDIA other than “A.F.D. STD.”
PORT adapter to/from the unit while the system is • Depending on the type of DIGITAL MEDIA PORT
turned on. adapter, you may be able to operate a connected
• Depending on the type of DIGITAL MEDIA PORT component using either the buttons on the remote or
adapter, the images are also output (page 52). the unit. The following illustration shows an example
• When you use the system and the Bluetooth Wireless of buttons that can be used in this case.
Audio Adapter (such as TDM-BT1, not supplied) at
the same time, transmission distance between the
Bluetooth transmitter and Bluetooth Wireless Audio
Adapter may be reduced. In this case, place the 1 2 3
4 5 6
Bluetooth transmitter as far as possible from the
7 8 9
system, or move the Bluetooth Wireless Audio 0
Adapter closer to the Bluetooth transmitter.
• When you use the system and the Wireless Network
Audio Adapter (such as TDM-NC1, not supplied) at
the same time, place the Wireless Network Audio
Adapter as far as possible from the system.
FUNCTION
./>
H
X
x
88US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb08ext.fm] masterpage:Right
specdef v20070110
Using an S-AIR Product Establishing sound

transmission between the unit
The unit is compatible with the S-AIR function
(page 153), which allows sound transmission
and S-AIR sub unit
between S-AIR products. (ID setting)
About S-AIR products For the surround amplifier
There are two types of S-AIR product. For the S-AIR receiver
• S-AIR main unit (this unit): This is for
Simply by matching the ID of the unit and the
transmitting sound. You can use up to three
S-AIR sub unit, you can establish sound
S-AIR main unit. (The number of usable
transmission.
S-AIR main unit depends on the use
environment.)

To set the ID of the unit
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier: You can enjoy
1 Press "/1.
surround speaker sound wirelessly. The system turns on.
– S-AIR receiver: You can enjoy system 2 Press HOME.
sound in another room. The home menu appears on the TV screen.
Room A 3 Press C/c to select [Setup].

S-AIR main unit
HDMI S-AIR
4 Press X/x to select [System Settings],
then press .
5 Press X/x to select [S-AIR ID], then
press .
6 Press X/x to select the desired ID, then
press .
S-AIR sub unit You can select any ID (A, B, or C).
(surround amplifier) The confirmation display appears, then
disappears automatically.
Room B
7 Set the S-AIR sub unit to the same ID.
Sound transmission is established as
S-AIR sub unit follows (example):
(S-AIR receiver)
(not supplied) S-AIR main unit
(This unit)
Note HDMI S-AIR
ID A
• You cannot operate this function if you do not insert
the wireless transceiver in the unit correctly
(page 54).
ID A ID A
S-AIR sub unit S-AIR sub unit
89US

[4-109-708-14(1)]
specdef v20070110
Tip To use multiple S-AIR main units

• To confirm the current ID, perform Steps 1 to 6 You can use multiple S-AIR main units by
above. When you pair the unit with the S-AIR sub setting a different ID for each component.
unit (page 92), [(Pairing)] appears beside ID on the
display for selecting ID.
S-AIR main unit
To set the ID of the surround (This unit) Other S-AIR
main unit
amplifier HDMI S-AIR
1 Make sure that the SURROUND ID A ID B

SELECTOR switch of the surround
amplifier is set to SURROUND.
2 Set the S-AIR ID switch of the surround
amplifier to match the ID (A, B, or C) of
the unit.
3 Press POWER on the surround
amplifier. ID A ID A ID B
When sound transmission is established, S-AIR sub unit S-AIR S-AIR sub unit
sub unit
the POWER / ON LINE indicator of the
surround amplifier turns green.
For details of the POWER / ON LINE
indicator, see “To check the transmission
status” (page 58).
Tip
• When you use the additional surround amplifier
(optional) with the surround back speakers
(optional), set the SURROUND SELECTOR
switch to SURROUND BACK.
To set the ID of the S-AIR

receiver
Refer to the operating instructions of the S-AIR
receiver.
90US

[4-109-708-14(1)]
specdef v20070110
3 Select the desired function on the

Enjoying the system’s sound in S-AIR receiver.
another room x When “PARTY” is set
The S-AIR receiver’s function changes
For the S-AIR receiver sequentially as you press FUNCTION of
the main unit (page 64).
You can enjoy the system’s sound by using the
x When “SEPARATE” is set
S-AIR receiver. The S-AIR receiver can be
The S-AIR receiver’s function changes as
installed anywhere, regardless of the location of
follows.
the unit, for enjoying the system’s sound in
another room.
“MAIN UNIT” t “TUNER FM” t
For details of the S-AIR receiver, refer to the “TUNER AM” t “DMPORT” t …
operating instructions of the S-AIR receiver.

1 Set the ID of the S-AIR receiver to that To enjoy the same function as the unit,
of the main unit. select “MAIN UNIT.”
• To set the ID of the unit, see “To set the ID When “TUNER FM” or “TUNER AM” is
of the unit” (page 89). selected on the unit, you can only select the
• To set the ID of the S-AIR receiver, refer same band for the tuner on the S-AIR
to the operating instructions of the S-AIR receiver. In this case, when you select other
receiver. than “TUNER FM” or “TUNER AM” on
the unit, you can select any band for the
2 Press S-AIR MODE on the remote of the tuner on the S-AIR receiver.
main unit.
The S-AIR mode appears in the front panel
4 Adjust the volume on the S-AIR
receiver.
display. Each time you press S-AIR
MODE, the S-AIR mode changes. Note
• “PARTY”: The S-AIR receiver outputs • When the sound is other than 2 channel stereo, multi
channel sound is downmixed to 2 channel.
sound according to function set on the
• The sound of the S-AIR receiver may be cut off by
unit.
operation of the unit.
• “SEPARATE”: You can set the desired
function for the S-AIR receiver while unit To control the system from the
functions do not change. S-AIR receiver
You can control the system from the S-AIR
receiver by using the following buttons.
Press Operation
H, X, x, Share the same operations on the
./> remote and unit.
S-AIR CH Change the function of the system.
For details, refer to the operating instructions of

the S-AIR receiver.
91US

[4-109-708-14(1)]
specdef v20070110
Enjoying the S-AIR receiver Using the surround amplifier

while the unit is in standby for the surround back speakers
mode For the surround amplifier
For the S-AIR receiver
When you use the additional surround amplifier
(optional) with surround back speakers
You can enjoy the S-AIR receiver while the unit
(optional), set the SURROUND SELECTOR
is in standby mode by setting [S-AIR Standby]
switch to SURROUND BACK. For details
to [On].
about the surround back speakers, see “About
1 Press "/1. the surround back speaker” (page 29).
The system turns on.
2 Press HOME.
Identifying the unit with a
specific S-AIR sub unit
3 Press C/c to select [Setup].
(Pairing operation)
then press . For the surround amplifier
For the S-AIR receiver
5 Press X/x to select [S-AIR Standby],
then press .
It is easy to set the same ID for the unit and an
6 Press X/x to select the desired setting. S-AIR sub unit, such as a surround amplifier or
• [On]: You can enjoy the S-AIR receiver S-AIR receiver, to establish sound transmission.
while the unit is in standby mode or turned However, neighbors may also receive your
on. system’s sound if IDs are the same, or you may
• [Off]: You cannot enjoy the S-AIR receive the sound from neighbors. To prevent
receiver while the unit is in standby mode. this, you can identify the unit with a specific
S-AIR sub unit by performing the pairing
7 Press . operation.
x Before pairing
Note Sound transmission is established by the ID
• When you set [S-AIR Standby] to [On], the power (example).
consumption during the standby mode increases.
• When you turn the system off while [S-AIR Standby] Your room Neighbor
is set to [On], “S-AIR” flashes (when sound This unit
transmission between the unit and S-AIR receiver is
not established), or lights up (when sound
HDMI S-AIR
transmission between the unit and S-AIR receiver is

ID A
established) in the front panel display.
• If you turn the system off with the disc tray opened
while [S-AIR Standby] is set to [On], the disc tray
may not close automatically.
• When the wireless transceiver is not inserted in the
unit, you cannot set the [S-AIR Standby].
• [S-AIR Standby] is set to [Off] automatically when
ID A ID A
the wireless transceiver is removed from the unit.
S-AIR sub unit S-AIR sub unit
92US

[4-109-708-14(1)]
specdef v20070110
x After pairing 7 Press C/c to select [OK], then press

Sound transmission is established between the .
paired unit and S-AIR sub unit(s) only. The unit starts pairing.
Your room Neighbor
To not perform pairing, select [Cancel].
This unit 8 Start pairing of the S-AIR sub unit.

HDMI S-AIR
x For the surround amplifier

ID A
Press POWER on the surround amplifier to
No transmission
turn on the surround amplifier and press
PAIRING on the rear panel of the surround
amplifier.
The PAIRING indicator of the surround
amplifier flashes red when pairing starts.
When sound transmission is established,

ID A ID A the PAIRING indicator of the surround
S-AIR sub unit S-AIR sub unit amplifier turns red and the confirmation
display appears.
Pairing
Tip
• To press PAIRING on the rear panel of the
To perform pairing surround amplifier, a slim instrument, such as a
1 Place the S-AIR sub unit that you want paper clip, can be used.
to pair near the unit. x For the S-AIR receiver
Note
Refer to the operating instructions of the
• Remove headphones from the surround S-AIR receiver.
amplifier (if connected). When sound transmission is established,
the confirmation display appears.
2 Match the IDs of the unit and the S-AIR
sub unit. Note
• To set the ID of the unit, see “To set the ID • Perform the pairing within several minutes after
of the unit” (page 89). Step 8. If you do not, the pairing is canceled
automatically and the confirmation display
• To set the ID of the surround amplifier, appears. To perform pairing, select [OK]. To
see “To set the ID of the surround return to the previous display, select [Cancel].
amplifier” (page 90).
• To set the ID of the S-AIR receiver, refer
9 Press C/c to select the next operation.
to the operating instructions of the S-AIR x To finish pairing
receiver. Select [Finish], then press .
3 Press HOME. x To perform pairing of another S-AIR
The home menu appears on the TV screen. sub unit
Select [Continue], then press .
Note
5 Press X/x to select [System Settings], • If you perform the pairing operation between the unit
then press . and another S-AIR sub unit (page 92), sound
6 Press X/x to select [S-AIR Pairing], transmission established by ID is canceled.
then press . • When you perform pairing, [(Pairing)] appears beside
ID on the display for selecting ID.
The confirmation display appears.
93US

[4-109-708-14(1)]
specdef v20070110
To cancel pairing Note

Perform the ID setting of the unit according to • In most cases, you will not need to change this
the procedure of “To set the ID of the unit” setting.
(page 89). If you select a new ID (you can select • If [S-AIR RF Change] is set to [Off], transmission
the same ID as before), pairing is canceled. between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for Wi-Fi
channel 1
If sound transmission is
– S-AIR ID B: equivalent channel for Wi-Fi
unstable channel 6
– S-AIR ID C: equivalent channel for Wi-Fi
For the surround amplifier
channel 11
For the S-AIR receiver • The transmission may be improved by changing the
transmission channel (frequency) of the other
If you use multiple wireless systems which wireless system(s). For details, refer to the operating
sharing the 2.4 GHz band, such as wireless LAN instructions of the other wireless system(s).
or Bluetooth, the transmission of S-AIR
products or other wireless systems may be
unstable. In this case, the transmission may be
improved by changing the following [S-AIR RF
Change] setting.
1 Press HOME.
then press .
4 Press X/x to select [S-AIR RF Change],
then press .
5 Press X/x to select the desired setting.
• [Auto]: Normally select this. The system
changes the setting to [On] or [Off]
automatically.
• [On]: The system transmits sound by
searching the better channel for
transmitting.
• [Off]: The system transmits sound by
fixing the channel for transmitting.
6 Press .
7 When you set to [Off], select the ID so
that sound transmission is most stable
(page 89).
94US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb09oth.fm] masterpage:Right
specdef v20070110
Note
• Depending on the connected component, the Control
Other Operations for HDMI function may not work. Refer to the
operating instructions supplied with the component.
Using the Control for • The Control for HDMI function may not work if you
connect a component other than Sony, even if the
HDMI Function for component is compatible with the Control for HDMI
function.
“BRAVIA” Sync
Preparing for the Control for
This function is available on TVs with the HDMI function
“BRAVIA” Sync function only.
By connecting Sony components that are (Control for HDMI - Easy Setting)
compatible with the Control for HDMI function
The system is compatible with the Control for
with an HDMI cable (not supplied), operation is
HDMI - Easy Setting function. If the TV is
simplified as below:
compatible with the Control for HDMI - Easy
– Theater Mode (page 96)
Other Operations
Setting function, you can set the system’s
– One-Touch Play (page 96) [Control for HDMI] function automatically by
– System Power Off (page 97) setting the TV. For details, refer to the operating
– Volume Limit (page 97) instructions of the TV.
– System Audio Control (page 97)
If the TV is not compatible with the Control for
– Language Follow (page 97) HDMI - Easy Setting function, set the Control
for HDMI function of the system and TV
Control for HDMI is a mutual control function manually.
standard used by CEC (Consumer Electronics
Control) for HDMI (High-Definition Note
Multimedia Interface). • Displayed items vary depending on the country model.

1 Make sure that the system is
The Control for HDMI function will not work in connected to the TV and the connected
the following cases: components (which should be
– When you connect this system to a compatible with the Control for HDMI
component which is not compatible with the function) using HDMI cables.
Control for HDMI function. 2 Turn on the TV and press [/1 to turn on
– A component does not have an HDMI jack. the system.
3 Switch the input selector on your TV so
There are convenient buttons on the system’s that the signal from the system through
remote for operating the TV, such as the HDMI input appears on the TV
THEATER, ONE-TOUCH PLAY, AV "/1. For screen.
details, see “Controlling the TV or Other
Components with the Supplied Remote” 4 Set the Control for HDMI function of the
system and TV.
(page 101) and refer to the operating
instructions of the TV. The Control for HDMI function for the
system and the connected component is
THEATER
ONE-TOUCH
PLAY AV
simultaneously set to on.
BRAVIA Sync
During the setting, “SCANNING” appears
STB TV BD in the front panel display. After you finish
OPERATION CHANGE
1
1
2
2
3
3
the setting, “COMPLETE” appears in the
front panel display. Wait until the setting is
complete.
95US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb09oth.fm] masterpage:Left
specdef v20070110
Note Tip
• For details on setting the TV and the connected • The default setting of the Control for HDMI function
components, refer to their operating of the system is [Off].
instructions.
If “SCANNING” or “COMPLETE” Using the Theater Mode

does not appear after performing
in Control for HDMI – Easy Setting (Theater Mode)
Set the Control for HDMI function to on for the When you press THEATER, the system
system and the connected components automatically switches to the optimum video
individually. mode for watching movies and the speaker
1 Press HOME. output also switches automatically. When
connected with a Theater Mode-compatible TV
using the HDMI cable, the TV's video mode
2 Press C/c to select [Setup]. switches to Theater Mode.
3 Press X/x to select [HDMI Settings],
Watching BD/DVD by a single
then press .
The options for [HDMI Settings] appear. button press
4 Press X/x to select [Control for HDMI],
(One-Touch Play)
then press .
By only pressing ONE-TOUCH PLAY, the TV
5 Press X/x to select [On], then press turns on, the TV is set for BD/DVD input
. selector, and the system starts playing a disc
The Control for HDMI function is set to on. automatically.
6 Set the Control for HDMI function of the
The system and TV work as follows (e.g.):
connected component to on.
For details on setting the connected
component, refer to its operating This system TV
instructions. Turns on. (If not already Turns on. (If not already
turned on.) turned on.)
7 Select the input of the system r r
connected to the component you want
Switches to “BD/DVD” Switches to HDMI input.
to use the Control for HDMI function for function. r
(HDMI1, HDMI2), and repeat Step 6.
r Minimizes sound level.
Starts playing the disc and (System Audio Control)
If you add or reconnect the
outputs the sound.
component
Perform steps of “Preparing for the Control for When playing back a connected component, the
HDMI function” again. system and the TV turn on automatically and
Note switch to the appropriate HDMI input.
• During the setting of the Control for HDMI function
Note
for the system, the System Audio Control function
• Make sure the HDMI connection is correct, and set
does not work.
the [Control for HDMI] to [On].
• If the Control for HDMI function for the connected
• Depending on the TV, the beginning of the content
component cannot be set simultaneously by setting
may not be played back.
“CONTROL FOR HDMI” of the TV, set the Control
• Depending on the disc, playback may take a while to
for HDMI function using the menu of the connected
start.
component.
• One-Touch Play does not work when you press H.
• For details on setting the TV and the connected
components, refer to their operating instructions.
96US

[4-109-708-14(1)]
specdef v20070110
• When the system is turned on, the TV sound

Turning the system off in sync will be output from the speakers of the system.
with the TV • When the TV sound is output form the
speakers of the system, you can adjust the
(System Power Off) volume and turn off the sound of the system
When you turn the TV off by using the POWER using the TV remote.
button on the TV’s remote or AV "/1 on the Note
system’s remote, the system turns off • If the TV is turned on before turning on the system,
automatically. TV sound will not be output for a moment.
• While the TV is in PAP (picture and picture) mode,
Note
the System Audio Control function will not work.
• Before using the System Power Off function, set the When the TV exits PAP mode, the output method of
function for TV power. For details, refer to the the TV returns to the one before PAP mode.
operating instructions of the TV.
• When you switch the TV input selector, or depending
• Depending on the status, the system or the connected on the status of the connected components, the
components may not turn off automatically. For system may switch the input automatically.
details, see the operating instructions supplied with
Other Operations
the connected components. Tip
• You can connect the system and the TV audio
digitally. For details, see page 48.
Setting the Maximum Volume
Level of the System Changing the language for the
(Volume Limit) on-screen display of the TV
If you change the output method of the TV to the
system speaker on the TV menu or by pressing (Language Follow)
THEATER, loud sound may be output When you change the language for the on-screen
depending on the volume level of the system. display of the TV, the system's on-screen
You can prevent this by limiting the maximum display language is also changed after turning
level of the volume. For details, see [Volume the system off and on.
Limit] (page 114).
Enjoying TV sound from the

speakers in this system
(System Audio Control)
You can enjoy TV sound in this system by easy
operation.
To use this function, connect the system and the
TV with an audio cord (not supplied) and an
HDMI cable (not supplied) (page 48).
You can use the System Audio Control function

as follows:
• You can enjoy TV sound from the speakers of
the system by means of a simple operation. For
details, see the operating instructions of the
TV.
97US

[4-109-708-14(1)]
specdef v20070110
5 Connect the calibration mic to the

Calibrating the A.CAL MIC jack on the rear panel.
Set up the calibration mic at the ear level
Appropriate Settings using a tripod, etc. (not supplied). The front
of each speaker should face the calibration
Automatically mic, and there should be no obstruction
between the speakers and the calibration
[Auto Calibration] mic.
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound COMPONENT VIDEO OUT
Y P B/
CB
PR/
CR
VIDEO OUT IR REMOTE TV OPTICAL SAT/CABLE DIGITAL
IN
automatically. LAN(100)
Y
SAT/CABLE
PB / CB
COMPONENT VIDEO IN
PR / C R HDMI
IN 1 IN 2 OUT
EZW-RT10
ANTENNA
EXTERNAL
FM
Note R L DMPORT
ECM-AC2
DC5V
R L 700mA
MAX
AUDIO
AM
VIDEO SAT/CABLE IN
• The system outputs a loud test sound when [Auto

Calibration] starts. You cannot turn the volume A.CA
L
MIC
down. Give consideration to children and neighbors. ECM-A
C2
• Make sure that the headphones are not connected to

the surround amplifier. You cannot operate the
following Steps with the headphones connected.
1 Press HOME.
Calibration mic
3 Press X/x to select [Audio Settings],

then press .
4 Press X/x to select [Auto Calibration],
then press .
The confirmation display for [Auto
Calibration] appears.
Ex. BDV-IT1000ES
6 Press X/x to select [OK].

To cancel, select [Cancel].
98US

[4-109-708-14(1)]
specdef v20070110
7 Press . 9 Press X/x to select [OK] or [Cancel],

[Auto Calibration] starts. then press .
The system adjust the speaker setting x The measurement is OK.
automatically. Disconnect the calibration mic, then select
Be quiet during the measurement. [OK]. The result is implemented.
Note x The measurement is not OK.
• Before [Auto Calibration], make sure that the Follow the message, then select [OK] to
surround amplifier turns on and you install the retry.
surround amplifier in the appropriate location. If
you install the surround amplifier in an improper Note
location, such as another room, proper • While the Auto Calibration function works:
measurement will not be obtained. – do not turn off the power.
• When you use the additional surround amplifier – do not press any button.
for the surround back speakers (optional), make – do not change the volume.
sure that the additional surround amplifier turns – do not change the function.
on and you install the additional surround – do not change the disc.
amplifier in the appropriate location.
Other Operations
– do not insert or eject a disc.
• Avoid being in the measurement area and – do not connect the headphones to the surround
making noise during the measurement (about 1 amplifier.
minute), to avoid measurement failure. During
– do not disconnect the calibration mic.
the measurement, test signals are output from
the speakers. Tip
• The environment of the room in which the • You can check the distance between the listening
system is installed may affect measurements. position and each speaker. See page 100.
• Loud test sound is output when [Auto
Calibration] starts. You cannot turn the volume
down. Give consideration to children and
neighbors.
• If an error message appears, follow the message,
then select [OK].
An error message appears when:
– the headphones are connected to the surround
amplifier.
– the calibration mic is not connected.
– front speakers are not correctly connected.
– surround speakers are not correctly
connected.
– surround back speakers (optional) are not
correctly connected.
– subwoofer is not connected.
8 Confirm the conclusions of [Auto
Calibration].
The conclusions appear on the TV screen.
Press C/c to change the page. The first page
shows the distance of speakers. The second
page shows the level of speakers.
Note
• If measurement fails, follow the message then
retry [Auto Calibration].
99US

[4-109-708-14(1)]
specdef v20070110
[None]: Select this if no surround back speaker

Setting the Speakers is used.
[Subwoofer]
[Speaker Settings] [Yes]
To obtain the best possible surround sound, set
connection of the speakers and their distance x [Distance]
from your listening position. Then use the test When you move the speakers, be sure to set the
tone to adjust the level and the balance of the parameters of the distance (A) from the
speakers to the same level. listening position to the speakers.
Note
You can set the parameters from 0.0 to 7.0
• You cannot operate [Speaker Settings] when you meters (0 to 23 ft).
connect headphones to the surround amplifier.
The speakers in the illustration correspond to the
1 Press HOME.
following:
The home menu appears on the TV screen. 1Center speaker
2 Press C/c to select [Setup]. 2Front left speakers (L)
3Front right speakers (R)
3 Press X/x to select [Audio Settings], 4Subwoofer
then press . 5Surround left speakers (L)
4 Press X/x to select [Speaker Settings],
6Surround right speakers (R)
7Surround back left speakers (L)
then press . 8Surround back right speakers (R)
The [Speaker Settings] display appears.
5 Press X/x to select the item, press .
2 1 3
Setup the following settings.
x [Connection] 4
If you do not connect center or surround
speakers, set the parameters for [Center] and A
[Surround]. Since the front speaker and 5 6
subwoofer setting is fixed, you cannot change
them.
When you use the additional surround amplifier
for the surround back speakers (optional)
(page 28), set [Surround Back] also. A
7 8
[Front]
[Yes] [Front L/R] 3.0 m/10 ft: Set the front speaker
[Center] distance.
[Yes]: Normally select this. [Center] 3.0 m/10 ft*: Set the center speaker
[None]: Select this if no center speaker is used. distance.
[Surround L/R] 3.0 m/10 ft*: Set the surround
[Surround]
speaker distance.
[Yes]: Normally select this. [Surround Back L/R] 3.0 m/10 ft*: Set the
[None]: Select this if no surround speaker is surround back speaker distance.
used. [Subwoofer] 3.0 m/10 ft: Set the subwoofer
[Surround Back] distance.
[Yes]: Select this if surround back speaker is * This item appears when you set to [Yes] in the
used. [Connection] setting.
100US

[4-109-708-14(1)]
specdef v20070110
Note
• When you perform [Auto Calibration] in the Easy
Setup (page 60), the default settings are changed.
Controlling the TV or
• Depending on the input stream, [Distance] may not
be effective.
Other Components with
the Supplied Remote
x [Level]
You can adjust the sound level of the speakers, By adjusting the remote signal, you can control
center speaker, and subwoofer. You can set the your TV, a Sony component (such as a VCR,
parameters from –6.0 dB to +6.0 dB. Be sure to DVD player/recorder, etc.), CATV, or set-top
set [Test Tone] to [On] for easy adjustment. box/digital satellite receiver with the supplied
remote.
[Front L/R] 0.0 dB: Set the front speaker level. Note
[Center] 0.0 dB*: Set the center speaker level. • When you replace the batteries of the remote, the
[Surround L/R] 0.0 dB*: Set the surround code number may reset itself to the default (SONY)
speaker level. setting. Reset the appropriate code number.
[Surround Back L/R] 0.0 dB*: Set the surround
Other Operations
Back speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer level. Preparing the remote for
* This item appears when you set to [Yes] in the
[Connection] setting.
controlling the components
1 Press POP UP/MENU while pressing
x [Test Tone] TV (for TV) or STB (for a Sony
The speakers will emit a test tone to adjust component, CATV, set-top box/digital
[Level]. satellite receiver, etc.).
TV or STB (pressed button) flashes.
[Off]: The test tone is not emitted from the
speakers. 2 While TV or STB is flashing, enter the
[On]: The test tone is emitted from each speaker manufacturer’s code (see the table)
in sequence while adjusting level. When you using the number buttons, then press
select one of the [Speaker Settings] items, the TIME.
test tone is emitted from each speaker in If you successfully set the manufacturer’s
sequence. code, TV or STB will flash twice slowly. If
Adjust the sound level as follows. the setting is unsuccessful, TV or STB will
flash five times quickly.
1 Set the [Test Tone] to [On].
Code numbers of controllable
2 Press C/X/x/c repeatedly to select the
desired speaker and the level. components
3 Press .
If more than one code number is listed, try
entering them one at a time until you find the
4 Repeat Steps 1 to 3. code that works with your TV.
5 Press C/X/x/c repeatedly to set [Test TV
Tone] to [Off] after adjusting the
speaker level. Manufacturer Code number
SONY 5001 (default), 5002
Note
• The test tone signals are not output from the HDMI AIWA 5001
OUT jack. AKAI 5003
DAEWOO 5003, 5015, 5044
Tip
• To adjust the volume of all the speakers at one time, GE 5003, 5009, 5010, 5044
press VOLUME +/–. GOLDSTAR/LG 5003, 5015, 5017, 5044, 5068
101US

[4-109-708-14(1)]
specdef v20070110
Manufacturer Code number Manufacturer Code number

HITACHI 5003, 5014, 5015, 5017, 5044, GENERAL 8018, 8032, 8503, 8512, 8513,
5057, 5071 INSTRUMENT 8514, 8515, 8516, 8517, 8518,
JVC 5016 8519, 8532, 8553, 8554, 8557
KMC 5017 GNC 8505
MAGNAVOX 5003, 5015, 5017, 5018, 5044, GOLDSTAR 5825
5066 HAMLIN 8023, 8024, 8025, 8026, 8532,
MARANTZ 5027 8533, 8534, 8535, 8536
MITSUBISHI/MGA 5003, 5027, 5044, 5066, 5068 ILLICO 8507
NEC 5003, 5017, 5044, 5066 JERROLD 8001, 8002, 8003, 8004, 8005,
8006, 8007, 8008, 8018, 8022,
PANASONIC 5009, 5053, 5072
8032, 8503, 8512, 8513, 8514,
PHILIPS 5015, 5018, 5057, 5070, 5071 8515, 8516, 8517, 8518, 8519,
PIONEER 5009, 5025, 5051 8532, 8553, 8554, 8557
RCA/PROSCAN 5003, 5010, 5044 MACOM 8033, 8034, 8035, 8540, 8541,
SAMPO 5066 8542
SAMSUNG 5003, 5015, 5017, 5044, 5057, MAGNAVOX 8037

5066, 5069, 5074 MEMOREX 8506, 8523, 8544
SHARP 5017, 5035, 5065 MOTOROLA 8503, 8510, 8511
TOSHIBA 5035, 5041, 5051 NET 8030, 8552
OAK 8027, 8028, 8029, 8537, 8538,
Sony component 8539
VCR 7001, 7002, 7003 PACE 8507
DVD player/recorder 4001, 4002, 4003, 4004 PANASONIC 8019, 8020, 8021, 8523, 8529,
8530, 8531
CATV PARAGON 8506, 8523
Manufacturer Code number PHILIPS 8039, 8040, 8041, 8043, 8044,
8504, 8546, 8547, 8548, 8549,
SONY 8501
8550, 8551
ABC 8513, 8555
PIONEER 8014, 8015, 8507, 8525, 8526
ADELPHIA 8507, 8510
PULSAR 8506, 8523
ADVANCED 8507
QUASAR 8523
NEWHOUSE
REGAL 8532, 8533, 8534, 8535, 8536
ALTRIO 8507
RODGERS 8507
AMERICAST 8505
RUNCO 8506, 8523
ATLANTIC 8507
BROADBAND SAMSUNG 8038, 8525, 8545
BELL & HOWELL 8513 SCIENTIFIC 8009, 8010, 8011, 8502, 8507,
ATLANTA 8508, 8509, 8520, 8521, 8522,
BELL SOUTH 8505
8555, 8556
BLUE RIDGE 8507
SEREN 8507
BRIGTH HOUSE 8507
SIGECOM 8507
CABLEVISION 8507
SUSQUEHANNA 8507
CHARTER 8507
TIME WARNER 8507
COMCAST 8507
TOCOM 8016, 8017, 8031, 8527, 8528,
COX 8507 8553
DIRECTOR 8503 TOSHIBA 8506, 8523
GEMINI 8036, 8543 VIDEOTRON 8507
102US

[4-109-708-14(1)]
specdef v20070110
Manufacturer Code number Manufacturer Code number

WIDEOPENWEST 8505, 8507 PAYSAT 8716
ZENITH 8012, 8013, 8505, 8506, 8523, PHILIPS 8255, 8278, 8715, 8716, 8718
8524 PROSCAN 8704, 8709, 8719
RADIX 8213, 8226, 8231, 8253
Set-top box/digital satellite
RCA 8704, 8709, 8719, 8721
receiver
SABA 8210, 8211, 8230, 8234, 8235,
Manufacturer Code number 8248, 8270, 8286
SONY 8201, 8202, 8203, SAMSUNG 8287, 8288, 8717, 8722
8701 (default), 8702, 8703
Sky 8243
ADB 8262
SKY MASTER 8205, 8207, 8285
ALPHASTAR 8710
Sky+ 8295
AMSTRAD 8204, 8225, 8226, 8247, 8259
STAR SIGHT 8716
B sky B 8243
STRONG 8289, 8290, 8291
CANAL + 8208
TECHNISAT 8220, 8221, 8236, 8241, 8246,
Other Operations
CROSSDIGITAL 8717 8252, 8266, 8268, 8279, 7280
DGTEC 8292, 8293, 8294 Thomson 8234, 8271, 8274, 8275
DIRECTV 8713, 8717, 8718, 8719, 8723, TOMSON 8283, 8284
8714
TOSHIBA 8708
DISH NETWORK 8712, 8714, 8725
TPS 8256
ECHOSTAR 8712, 8720
UNIDEN 8715, 8716
GALAXIS 8212, 8214, 8216, 8232, 8233,
8254, 8272 WATSON 8206
GE 8719 Zehnder 8209, 8215, 8249, 8251, 8264,

8268, 8269, 8281, 8282
GENERAL 8711
INSTRUMENT
Gold Box 8238
Grundig 8228, 8229, 8237, 8265
HIRSCHMANN 8263
HITACHI 8707
HUGHES 8706
Hyundai 8245
Jerrold 8240
JVC 8712, 8714, 8720
KATHREIN 8224, 8244, 8250
MAGNAVOX 8715, 8716, 8718
MATSUI 8227
MEMOREX 8716
NIKKO 8223
NOKIA 8219, 8239, 8257, 8276, 7277
NTV PLUS 2000 8242
On digital 8273
PACE 8217, 8218, 8222, 8243, 8260,
8261
PANASONIC 8267, 8705
103US

[4-109-708-14(1)]
specdef v20070110
By pressing You can

Controlling the TV with the ./>* Skips to the previous/next chapter,
remote track, or file.
* Replay the scene/briefly fast
You can control the TV using the following forward the scene.
buttons. To use these buttons, set the remote to m/M* Fast reverse/fast forward during
the TV mode by pressing TV (TV lights up for 1 playback.
second).
* Only available for the component that is connected
Note to the TV with the HDMI or iLINK connection. For
• During the TV mode, if you press any of the details, see the operating instructions of the TV.
following buttons, TV lights up. (Depending on the
manufacturer setting, some buttons may not work, Tip
and TV does not light up.) • The function of these buttons are same as the remote
buttons of the Sony TV. For details, refer to the
• When you press other than the following buttons
operating instructions of the TV.
during the remote is in the TV mode, TV does not
light up.
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons.
By pressing You can

AV "/1 Turn the TV on or off.
THEATER Enjoy optimal image suited for
movies.
TV INPUT Switch the TV’s input source
between the TV and other input
sources.
VOLUME +/– Adjust the TV volume.
CH +/– Select the TV channel.
MUTING Turn off the TV sound
temporarily.
Number buttons, Select the TV channel.
, ENTER
HOME Display the menu of the TV.
FAVORITES Display the favorite channel list.
CC Change the subtitle of the TV.
GUIDE Display the Digital Electronic
Programme Guide (EPG).
TOOLS Display the operation menu for the
current display.
RETURN Return to the previous channel or
layer on the menu of the TV.
Input “.” (dot) when inputting
numerics.
WIDE Change the aspect ratio of the
connected TV.
C/X/x/c, Select the item on the menu.
H* Start playback.
X* Pause playback.
x* Stop playback.
104US

[4-109-708-14(1)]
specdef v20070110
Controlling the Sony Using the Sound Effect

component, CATV, or set-top
box/digital satellite receiver Enjoying the sound at low
You can control the Sony component such as a volume
VCR or DVD player/recorder, CATV, or set-top
box/digital satellite receiver using the following You can enjoy sound effects or dialog, as you
buttons. To use these buttons, set the remote to would in a movie theater, even at low volume. It
the STB mode by pressing STB (STB lights up is useful for watching movies at night.
for 1 second). Press NIGHT.
Note “NIGHT ON” appears in the front panel display
• During the STB mode, if you press any of the and the sound effect is activated.
following buttons, STB lights up. (Depending on the During the night mode is on, “NIGHT” lights up
manufacturer setting, some buttons may not work, in the front panel display.
and STB does not light up.)
Other Operations
• When you press other than the following buttons Note
during the remote is in the STB mode, STB does not • When sound is output from the center speaker, this
light up. effect is more pronounced, as speech (movie dialog,
• Depending on the component, you may not be able to etc.) is easy to hear. When sound is not output from
control the component or to use some of the buttons. the center speaker, or you are using the headphones,
the system optimally adjusts the volume.
By pressing You can
To turn off the sound effect
AV "/1 Turn the set-top box/digital
satellite receiver on or off. Press NIGHT so that “NIGHT” disappears from
CH +/– Select the set-top box/digital
satellite receiver channel.
Number buttons, Select the set-top box/digital
, ENTER satellite receiver channel.
Adjusting the sound
HOME Display the menu of the set-top
You can adjust the sound by changing the tonal
box/digital satellite receiver.
balance of the sound.
OPTIONS Display the options menu that can be
selected appears on the TV screen. 1 Press TONE repeatedly until the
RETURN Return to the previous channel or desired setting appears in the front
layer on the menu of the set-top panel display.
box/digital satellite receiver. • “BASS”: You can adjust the bass
CLEAR Clear the entry field. frequencies.
C/X/x/c, Select the item on the menu. • “MIDDLE” (BDV-IS1000 only): You
DVD Change the operation mode for can adjust the middle frequencies.
RECORDER Sony DVD recorders. • “TREBLE”: You can adjust the treble
(HDD, DVD)* frequencies.
H* Start playback. 2 Press X/x to adjust the sound.
X* Pause playback. The adjusted value appears in the front
x* Stop playback. panel display. You can set the value from
* Briefly fast forward the scene. –6.0 to +6.0.
m/M* Fast reverse/fast forward during
playback.
* Only available for Sony component such as a VCR,

DVD player/recorder, etc.
105US

[4-109-708-14(1)]
specdef v20070110
Using the Sleep Timer Deactivating the Buttons

You can set the system to turn off at a preset on the Unit
time, so you can fall asleep listening to music.
You can preset the time in 10-minutes (Child Lock)
increments. You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
Press SLEEP.
such as child mischief (child lock function).
Each time you press SLEEP, the minutes display
(the remaining time) changes by 10-minutes. Press x on the unit for more than 5
When you set the sleep timer, “SLEEP” flashes seconds.
in the front panel display. “CHILD LOCK” and “ON” appear in the front
panel display.
To check the remaining time The child lock function is activated and the
Press SLEEP once. buttons on the unit are locked. (You can operate
the system by using the remote.)
To change the remaining time To cancel, press x for more than 5 seconds so
Press SLEEP repeatedly to select the desired that “CHILD LOCK” and “OFF” appear in the
time. front panel display.
Note
• When you operate the buttons on the unit while the
child lock function is on, “CHILD LOCK” appears in
106US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb10set.fm] masterpage:Right
specdef v20070110
You can setup the following options.
Settings and Adjustments Icon Explanation

[Network Update] (page 108)
Using the Setup Display Updates the software of the
system.
[Video Settings] (page 109)
You can make various adjustments of items such
Makes the video settings
as picture and sound. according to the type of
Select (Setup) on the home menu when you connecting jacks.
need to change the settings of the system. [Audio Settings] (page 111)
Note
Makes the audio settings
• Playback settings stored in the disc take priority over according to the type of
the Setup Display settings and not all the functions connecting jacks.
described may work. [BD/DVD Viewing Settings]
(page 112)
1 Press HOME. Makes detailed settings for BD/
The home menu appears on the TV screen. DVD playback.
[Photo Settings] (page 114)
2 Press C/c to select [Setup]. Makes the photo-related
settings.
Settings and Adjustments

Network Update [HDMI Settings] (page 114)
Makes the HDMI settings.
Setup
Video Settings [System Settings] (page 116)

Makes the system-related
Audio Settings
settings.
BD/DVD Viewing Settings
Photo Settings
[Network Settings] (page 117)
Makes detailed settings for
Internet and network.
3 Press X/x to select the setup category [Easy Setup] (page 118)
icon to change, then press . Re-runs the Easy Setup to make
Example: [Video Settings] the basic settings.
[Resetting] (page 119)
Resets the system to the factory
settings.
4
Setup
TV Type
Set the screen aspect ratio of your TV.
Press X/x to select an item, then press
Screen Format Original .
DVD Aspect Ratio Letter Box
The options for the selected item appear.
Cinema Conversion Mode Auto
Example: [TV Type]
Setup
TV Type 16:9
4:3
Screen Format
DVD Aspect Ratio
Cinema Conversion Mode
Options
107US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb10set.fm] masterpage:Left
specdef v20070110
5 Press X/x to select a setting, then

press .
[Network Update]
The setting is selected and setup is
complete. You can update and improve the functions of the
The options for the selected item appear. system.
Example: [4:3] For information about update functions, refer to
the following website;
http://www.sony.net/
Setup
1 Press X/x to select [Network Update],
TV Type 4:3 then press .
Set the screen aspect ratio of your TV.
Screen Format Original The unit connects to the network, and the
DVD Aspect Ratio Letter Box
display asks for confirmation.
2
Cinema Conversion Mode Auto
Press C/c to select [OK], then press

.
Selected setting
The unit starts downloading, then updating
the software automatically.
When updating finishes, “COMPLETE!”
appears for 5 seconds in the front panel
display, then the system automatically turns
off.
3 Press "/1 to turn the system on.
The system starts up with the updated
software.
Note
• Do not disconnect the AC power cord (mains lead) or
network cable while downloading or updating
software.
• Any operations, including opening the disc tray, are
not available while updating.
• Downloading times may differ depending on the
server provider or line status.
• When error messages on network connections
appear, check the network connections using
[Network Diagnostic] of [Internet Settings] in
[Network Settings] (page 117).
Tip
• The “UPDATE */9” counter (“*” indicates update
step) in the front panel display also shows progress of
the update.
• You can check the current software version by
selecting [System Information] in [System Settings]
(page 116).
• The [Setup] settings remain after updating.
• The system informs you of newer software version
information when [Software Update Notification] is
set to [On] (default) (page 116).
108US

[4-109-708-14(1)]
specdef v20070110
To update the software using an

update disc [Video Settings]
You can update and improve the functions of the
system using an update disc provided by Sony You can make the video settings according to
dealer or local authorized Sony service facility. the type of connecting jacks.
1 Insert the update disc.
The display asks for confirmation. x [TV Type]
You can select the aspect ratio of the connected
2 Select [OK], and press . TV.
Software update starts.
When updating finishes, “COMPLETE!” [16:9]: Select this when connecting to a wide-
appears for 5 seconds in the front panel screen TV or a TV with a wide mode function.
display, then the disc tray automatically [4:3]: Select this when connecting to a 4:3
opens. screen TV without a wide mode function.
3 Remove the disc.
x [Screen Format]
The system automatically turns off.
You can select the display configuration for a
4 Press "/1 to turn the system on. 4:3 screen picture on a 16:9 wide screen TV.
The system starts up with the updated

software. [Original]: Select this when connecting to a TV
with a wide mode function. Displays a 4:3
Note
screen picture in 16:9 aspect ratio even on a
• Do not disconnect the AC power cord (mains lead)
while updating. wide-screen TV.
• Any operations, including opening the disc tray, are [Fixed Aspect Ratio]: Changes the picture size
not available while updating. to fit the screen size with the original picture
aspect ratio.
Tip
• The “UPDATE */9” counter (“*” indicates update
step) in the front panel display also shows progress of x [DVD Aspect Ratio]
the update. You can select the display configuration for
• You can check the current software version by playback of 16:9 screen pictures on a 4:3 screen
selecting [System Information] in [System Settings] TV (selectable when [TV Type] is set to [4:3]
(page 116). and [Screen Format] is set to [Fixed Aspect
• The [Setup] settings remain after updating. Ratio]).
• For information about other software update
methods, refer to the following website or consult [Letter Box]: Displays a wide picture with black
your nearest Sony dealer or local authorized Sony bands on the top and bottom.
Service facility;
http://www.sony.net/
[Pan & Scan]: Displays a full-height picture on

the entire screen, with trimmed sides.
109US

[4-109-708-14(1)]
specdef v20070110
“HD” lights up in the front panel display

x [Cinema Conversion Mode] when outputting 720p/1080i/1080p video
You can set the video conversion method for signals.
480p, 720p, 1080i, or 1080p* signals from the
Note
HDMI OUT jack or the COMPONENT VIDEO
• If the picture is distorted or no picture appears,
OUT jacks.
wait for about 30 seconds without pressing any
* HDMI only
buttons. The display returns to the resolution
setting screen.
[Auto]: Normally select this. The unit • If the selected video output resolution is
automatically detects whether the material is incorrect, no picture appears on the screen when
video-based or film-based, and switches to the you press any button in 30 seconds. In this case,
appropriate conversion method. press and hold H and A on the unit for more
[Video]: The conversion method suited for than 5 seconds to reset the video output
video-based material will always be selected resolution to the lowest resolution.
regardless of the material. • When connecting the HDMI OUT jack and
other video output jacks at the same time, video
signals may not output from the jacks, other than
x [Output Video Format] from the HDMI OUT jack, when [Auto] or
Select the jack type to output video signals ([TV [1080p] is selected.
Connection Method]), then select output
[HDMI Resolution]/[Component
resolution for the HDMI/component connection Resolution]
([HDMI Resolution]/[Component Resolution]).
[Auto] (HDMI only): Normally select this.
1 Press X/x to select the jack type to The unit outputs signals starting from the
output video signals, then press . highest resolution acceptable to the TV:
Note 1080p > 1080i > 720p > 480p > 480i
• When connecting the HDMI OUT jack and If the resulting image format is undesirable,
other video output jacks at the same time, select try another setting that suits your TV.
[Component Video]. [480i]: Outputs 480i video signals.
[TV Connection Method] [480p]: Outputs 480p video signals.
[HDMI]: Outputs signals from the HDMI [720p]: Outputs 720p video signals.
OUT jack according to the [HDMI [1080i]: Outputs 1080i video signals.
Resolution] setting below. [1080p] (HDMI only): Outputs 1080p
[Component Video]: Outputs signals from video signals.
the COMPONENT VIDEO OUT jacks
according to the [Component Resolution] x [Pause Mode] (BD/DVD VIDEO/DVD-R/
setting below. DVD-RW only)
[Video or S Video]: Outputs signals from You can select the picture in pause mode.
the VIDEO OUT (VIDEO) or VIDEO OUT
(S VIDEO) jack. [Auto]: The picture, including subjects that
2 (When you select [HDMI] or move dynamically, is output with no jitter.
[Component Video]) Normally select this position.
Press X/x to select the signal type for [Frame]: The picture, including subjects that do
the HDMI OUT jack or COMPONENT not move dynamically, is output in high
VIDEO OUT jacks, then press . resolution.
When you change the video output
resolution, a picture is displayed in the
selected resolution for about 30 seconds,
then the display asks for confirmation.
Follow the on-screen instructions.
110US

[4-109-708-14(1)]
specdef v20070110
[Audio Settings] x [Attenuate - TV]

Distortion may occur when you listen to a
component connected to the TV jacks.
You can make the audio settings.
Distortion is not a malfunction and will depend
on the component connected.
x [BD Audio Setting] To prevent distortion, reduce the input level on
Selects whether to mix or not mix interactive the unit.
audio and secondary audio (commentary) when
playing a BD that contains such audio. [On]: Attenuates the input level. The output
level is changed.
[Mix]: Outputs the audio obtained by mixing the [Off]: Normal input level.
interactive audio and secondary audio to the
primary audio.
x [Attenuate - SAT/CABLE]
[Direct]: Outputs the primary audio only.
Distortion may occur when you listen to a
component connected to the SAT/CABLE IN
x [Audio DRC] (BD/DVD VIDEO only) jacks. Distortion is not a malfunction and will
You can compress the dynamic range of the depend on the component connected.
sound track. [Audio DRC] is useful for watching To prevent distortion, reduce the input level on
movies at low volume late at night.

the unit.
[Auto]: Performs playback at the dynamic range [On]: Attenuates the input level. The output
specified by the disc (BD-ROM only). Other level is changed.
discs are played back at the “Standard” level. [Off]: Normal input level.
[Off]: No compression of dynamic range.
[Standard]: The system reproduces the sound
x [Speaker Settings]
track with the kind of dynamic range that the
To obtain the best possible surround sound, set
recording engineer intended.
the speakers. For details, see “Setting the
[Max]: The system compresses dynamic range
Speakers” (page 100).
fully.
x [Auto Calibration]
x [Fs Limit]
You can calibrate the appropriate settings
You can select the upper limit of sampling
automatically. For details, see “Calibrating the
frequency in the audio signal for full sound
Appropriate Settings Automatically” (page 98).
adjustment.
[On]: Sets to 48kHz. You can operate all of the

sound control functions of the system.
[Off]: Sets to 192kHz.
Note
• [Fs Limit] works only for the “BD/DVD,” “HDMI1,”
or “HDMI2” function.
• In DTS96/24 format, some sound control functions
do not work even if you set to [On].
111US

[4-109-708-14(1)]
specdef v20070110
If you select [Select Age Restriction], you

[BD/DVD Viewing can enter the age from [0] to [255] using C/
X/x/c and the number buttons.
Settings] To cancel the Parental Control setting
Select [No Restrictions].
You can make detailed settings for BD/DVD
playback. Note
• If you forget the password, reset the system
(page 119) and set a new password (see [Password]
x [BD/DVD Menu] (page 113)).
You can select the default menu language for • When you play discs which do not have the Parental
BD-ROMs or DVD VIDEOs. Control function, playback cannot be limited on this
When you select [Select Language Code], the unit.
display for entering the language code appears. • Depending on the disc, you may be asked to change
Enter the code for your language by referring to the Parental Control level while playing the disc. In
“Language Code List” (page 139). this case, enter your password, then change the level.
• When [255] is selected in [Select Age Restriction],
the Parental Control setting is canceled.
x [Audio]
You can select the default track language for Tip
BD-ROMs or DVD VIDEOs. • You can change the password. See [Password]
When you select [Original], the language given (page 113).
priority in the disc is selected.
When you select [Select Language Code], the x [DVD Parental Control]
display for entering the language code appears. Playback of some DVD VIDEOs can be limited
Enter the code for your language by referring to according to a predetermined level such as the
“Language Code List” (page 139). age of the users. Scenes may be blocked or
replaced with different scenes.
x [Subtitle] 1 Enter your four-digit password using
You can select the default subtitle language for the number buttons.
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the 2 Press X/x to select [OK], then press
display for entering the language code appears. .
Enter the code for your language by referring to 3 Press X/x to select a level, then press
“Language Code List” (page 139). .
The lower the value, the stricter the
x [BD Parental Control] limitation.
Playback of some BD-ROMs can be limited To cancel the Parental Control setting
according to the age of the users. Scenes may be
Select [No Restrictions].
blocked or replaced with different scenes.
1 Enter your four-digit password using
Note
• If you forget the password, reset the system
the number buttons. (page 119) and set a new password (see [Password]
2 Press X/x to select [OK], then press (page 113)).
. • When you play discs which do not have the Parental
Control function, playback cannot be limited on this
3 Press X/x to select the age restriction, unit.
then press . • Depending on the disc, you may be asked to change
The lower the value, the stricter the the Parental Control level while playing the disc. In
limitation. this case, enter your password, then change the level.
112US

[4-109-708-14(1)]
specdef v20070110
Tip
• You can change the password. See [Password] x [Password]
(page 113). You can set or change the password for the
Parental Control function. A password allows
you to set a restriction on BD-ROM or DVD
x [Parental Control Region Code]
VIDEO playback. If necessary, you can
Playback of some BD-ROMs or DVD VIDEOs
differentiate the restriction levels for BD-ROMs
can be limited according to the geographic area.
and DVD VIDEOs.
Scenes may be blocked or replaced with
different scenes. 1 Enter your four-digit password using
the number buttons.
1 Enter your four-digit password using
the number buttons. 2 Press X/x to select [OK], then press
.
2 Press X/x to select [OK], then press
.
To change the password
3 Press X/x to select the area restriction,
1 After Step 1, enter your four-digit
then press .
password using the number buttons.
When you select [Select Region Code], the
display for entering the region code 2 Press X/x to select [OK], then press
appears. Enter the code for the area .

restriction by referring to “Parental Control/ 3 Enter a new password using the
Area Code List” (page 139). number buttons.
Note 4 Press X/x to select [OK], then press
• If you forget the password, reset the system .
(page 119) and set a new password (see [Password]
(page 113)).
x [Hybrid Disc Playback Layer]
• When you play discs which do not have the Parental
You can select the layer priority when playing a
Control function, playback cannot be limited on this
unit.
Hybrid Disc. To change the setting, turn the
• Depending on the disc, you may be asked to change
system off and on again.
the Parental Control level while playing the disc. In
this case, enter your password, then change the level. [BD]: Plays BD layer.
[DVD/CD]: Plays DVD or CD layer.
Tip
• You can change the password. See [Password]
(page 113). x [BD Internet Connection]
You can set whether to allow Internet
connections from the contents of a BD (in
BDMV mode) being played. Network
connections and settings are required when
using this function (page 117).
113US

[4-109-708-14(1)]
specdef v20070110
[Photo Settings] [HDMI Settings]

You can make the photo-related settings. You can make the HDMI settings.
x [Slideshow Speed] x [Control for HDMI]

You can change the slideshow speed. You can set the [Control for HDMI] function to
on/off. This function is available when you
[Fast]: Photos change rapidly. connect the system and TV with an HDMI cable.
[Normal]: Photos change at normal speed. For details, see “Using the Control for HDMI
[Slow]: Photos change slowly. Function for “BRAVIA” Sync” (page 95).
[On]: On. You can operate mutually between

components that are connected with an HDMI
cable.
[Off]: Off.
Note
• This function is available only when you connect the
unit and TV with the HDMI cable.
x [Volume Limit]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATER, the System Audio Control
(page 97) is activated and loud sound may be
output depending on the volume level of the
system. You can prevent this by limiting the
maximum level of the volume.
[Level3]: Maximum volume level is set to 15.

[Off]: Off.
Note
• This function is available only when you connect the
unit and TV with the HDMI cable and [Control for
HDMI] is set to [On].
114US

[4-109-708-14(1)]
specdef v20070110
x [BD-ROM 1080/24p Output] x [x.v.Color Output]

You can set to output 1920 × 1080p/24 Hz video Sets whether to send xvYCC information to the
signals when playing film-based materials on connected TV.
BD-ROMs (720p/24 Hz or 1080p/24 Hz). Combining xvYCC-compatible video with a TV
1920 × 1080p/24 Hz video signals can be output that supports x.v.Color display makes it possible
when all of the following conditions are met. to more accurately reproduce object colors
– You connect a 1080/24p-compatible TV present in the natural world.
using the HDMI OUT jack,
– [Output Video Format] is set to [HDMI], and [Auto]: Normally select this.
[Off]: Select this when the picture is unstable or
– [HDMI Resolution] is set to [Auto] or
colors appear unnatural.
[1080p].
The 24P indicator lights up when outputting
1920 × 1080p/24 Hz video signals. x [Audio (HDMI)]
You can set the output type for the audio signal
[Auto]: Outputs 1920 × 1080p/24 Hz video from the HDMI OUT jack.
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack. [AMP]: HDMI audio signals are output to the
[On]: Outputs 1920 × 1080p/24 Hz video system speakers only. The multi-channel sound

signals regardless of the connected TV type. can be played back as it is.
[Off]: Select this when your TV is not [TV+AMP]: HDMI audio signals are output
compatible with 1080/24p video signals. from the TV’s speaker and the system’s
speakers.
Note
Note
• Video signals may not be output when [BD-ROM
1080/24p Output] is set to [On]. • If you set to [TV+AMP], the sound quality of the
system depends on the TV's sound quality, such as the
number of channels, the sampling frequency, etc.
x [YCbCr/RGB] When the TV has stereo speakers, the sound output
You can set the color setting for video signals from the system’s speakers is also stereo as that of the
output from the HDMI OUT jack. Select the TV, even if you play multi-channel source.
setting that matches the connected TV type. • When you connect the system to a video component
(projector, etc.), sound may not be output from the
[Auto]: Automatically detects the type of system. In this case, select [AMP].
external device, and switches to the matching • When the System Audio Control function (page 97)
color setting. is activated, this setting may change automatically.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB (16-235)]: Select this when connecting to
a device with an HDCP-compliant DVI jack.
[RGB (0-255)]: Select this when connecting to
an RGB (0-255) device.
115US

[4-109-708-14(1)]
specdef v20070110
[On]: Turns on the screen saver function.

[System Settings] [Off]: Off.
You can make the system-related settings. x [S-AIR ID]

You can set the S-AIR ID of the system. For
x [OSD] details, see “Establishing sound transmission
You can select your language for the system on- between the unit and S-AIR sub unit (ID
screen displays. setting)” (page 89).
x [Dimmer] x [S-AIR Pairing]

You can adjust the lighting of the front panel You can pair the system and S-AIR sub unit,
display. such as surround amplifier or S-AIR receiver.
For details, see “Identifying the unit with a
[Bright]: Bright lighting. specific S-AIR sub unit (Pairing operation)”
[Dark]: Low lighting. (page 92).
x [Standby Mode] x [S-AIR Standby]

You can shorten the startup time when turning You can enjoy the S-AIR receiver while the unit
the system on. is in standby mode. For details, see “Enjoying
the S-AIR receiver while the unit is in standby
[Quick Start]: Shortens the startup time from mode” (page 92).
standby mode. You can operate the system
quickly after turning it on. x [S-AIR RF Change]
[Normal]: The default setting. You can improve the S-AIR transmission by
Note
changing the setting. For details, see “If sound
• When [Standby Mode] is set to [Quick Start], transmission is unstable” (page 94).
– power consumption will be higher than when
[Standby Mode] is set to [Normal]. x [Software Update Notification]
– the ventilation fan may turn on depending on the You can get information of newer software
surrounding temperature. version. The information appears on the TV
screen when you turn the system on. Network
x [Auto Display] connections and settings are required when
You can display information when switching using this function (page 117).
audio modes or during playback.
[On]: Sets the system to inform you of newer
[On]: Automatically displays information on the software version information (page 108).
screen when changing the viewing titles, picture [Off]: Off.
modes, audio signals, etc.
[Off]: Displays information only when you x [System Information]
press DISPLAY. You can display the system’s software version
information and the MAC address.
x [Screen Saver]
The screen saver image appears when you do not
use the system for more than 15 minutes while
an on-screen display, such as the home menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).
116US

[4-109-708-14(1)]
specdef v20070110
3 If your ISP has a specific proxy server

[Network Settings] setting, press X/x to select [Proxy
Settings], then press .
You can make detailed settings for Internet and The [Proxy Settings] display appears.
network. If the proxy server does not have a specific
setting, go to step 8.
x [Internet Settings] 4 Press X/x to select [Use of Proxy
These items are necessary when you connect to Server], then press .
the Internet via a network cable. Enter the
respective (alphanumeric) values for your
5 Press X/x to select [On], then press
.
broadband router or Wireless LAN router. The
items that need to be set may differ, depending 6 Select [Proxy Server] and [Port], and
on the Internet service provider or the router. For enter the settings.
details, refer to the instruction manuals that have To enter the proxy server, see “To enter
been provided by your Internet service provider characters” (page 117).
or supplied with the router. 7 Press RETURN.
1 Press X/x to select [IP Address 8 Press X/x to select [Network
Acquisition], then press . Diagnostic], then press .

2 Press X/x to select an item, then press 9 Press C/c to select [Start], then press
. .
[Use DHCP]: Select this when DHCP
(Dynamic Host Configuration Protocol) 10 Check that the message [Network
connections are correct.] appears.
server settings are available from your
Internet service provider. The network The setup is finished. If the message does
settings necessary for the system will be not appear, follow the on-screen messages.
assigned automatically.
To enter characters
If you set [DNS Server Auto Acquisition] to
[Off], set the following item: The display for entering characters appears
when you select [Proxy Server] in [Proxy
– [DNS Server (Primary)]
Settings].
– [DNS Server (Secondary)]
Proxy Server Entry
[Use Static IP Address]: Set the IP address Clear
manually according to your network Clear All
environment.
Set the following items: Space 0 Cancel
– [IP Address] Letter Type Symbol Finish
– [Subnet Mask]
– [Default Gateway]
– [DNS Server (Primary)]
1 Press the number button repeatedly to
select a character.
– [DNS Server (Secondary)] Example:
Note Press the number 3 button once to enter [D].
• When you set the [DNS Server (Primary)]/ Press the number 3 button three times to
[DNS Server (Secondary)] addresses manually, enter [F].
enter the [DNS Server (Secondary)] address.
Otherwise, the [Internet Settings] will be set 2 Press c, and enter the next character.
incorrectly.
3 Press YELLOW ([Finish]) to finish.
117US

[4-109-708-14(1)]
specdef v20070110
You can use the following buttons to enter

characters. [Easy Setup]
Buttons Details
You can recall the Easy Setup to make the basic
RED Switches the keyboard between settings.
[Letter Type] alphabet and numbers.
GREEN Switches the keyboard between 1 Press C/c to select [Start], then press
[A/a] upper case and lower case. .
BLUE Displays the keyboard for 2 Follow the instructions for “Step 5:
[Symbol] symbols. Performing the Easy Setup” (page 60)
YELLOW The input is entered, and the from step 4.
[Finish] system returns to the previous
display.
CLEAR Erases the character to the right
[Clear]/[Clear All] of the cursor.
To erase all displayed characters,
press and hold CLEAR for 2
seconds or more.
RETURN Returns to the previous display,
[Cancel] canceling the input.
C/X/x/c, • Select an input function using
C/X/x/c, and press .
• Enter characters as follows:
1Select a character selection
panel using C/X/x/c, and press
. 2Select a character using
C/c, and press .
118US

[4-109-708-14(1)]
specdef v20070110
[Resetting]
You can reset the system settings to the factory
default by selecting the group of settings. All the
settings within the group will be reset.
1 Press to select [Reset to Factory
Default Settings], then press .
2 Press X/x to select the settings you
want to reset to default, then press .
You can reset the following settings:
– [Video Settings]
– [Audio Settings]
– [BD/DVD Viewing Settings]
– [Photo Settings]
– [HDMI Settings]
– [System Settings]

– [Network Settings]
– [All Settings]
The display asks for confirmation.
3 Press C/c to select [Start], then press
.
To cancel, select [Cancel].
Note
• When [All Settings] is selected in Step 2, all system
settings are reset, and the system turns off.
119US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb11add.fm] masterpage:Left
specdef v20070110
• Do not place heavy objects on the unit.
Additional Information On operation

• If the system is brought directly from a cold to a warm
Precautions location, or is placed in a very damp room, moisture

may condense on the lenses inside the control unit.
Should this occur, the system may not operate
On safety properly. In this case, remove the disc and leave the
• To prevent fire or shock hazard, do not place objects system turned on for about half an hour until the
filled with liquids, such as vases, on the unit, or place moisture evaporates.
the unit near water, such as near a bathtub or shower • When you move the system, take out any disc. If you
room. Should any solid object or liquid fall into the don’t, the disc may be damaged.
cabinet, unplug the unit and have it checked by • If anything falls into the cabinet, unplug the unit and
qualified personnel before operating it any further. have it checked by qualified personnel before
• Do not touch the AC power cord (mains lead) with operating it any further.
wet hands. Doing so may cause an electric shock.
On adjusting volume
WARNING • Do not turn up the volume while listening to a section
To prevent injury, this apparatus must be securely with very low level inputs or no audio signals. If you
attached to the floor/wall in accordance with the do, the speakers may be damaged when a peak level
installation instructions. section is suddenly played.
On power sources On cleaning

• Unplug the unit from the wall outlet (mains) if you do • Clean the cabinet, panel, and controls with a soft cloth
not intend to use it for an extended period of time. To slightly moistened with a mild detergent solution. Do
disconnect the cord, pull it out by the plug, never by not use any type of abrasive pad, scouring powder or
the cord. solvent such as alcohol or benzine.
If you have any questions or problems concerning
On placement your system, please consult your nearest Sony dealer.
• Place the system in a location with adequate On cleaning discs, disc/lens
ventilation to prevent heat build-up in the system.
cleaners
• At high volume, over long periods of time, the cabinet
becomes hot to touch. This is not a malfunction. • Do not use cleaning discs or disc/lens cleaners
However, touching the cabinet should be avoided. Do (including wet or spray types). These may cause
not place the unit in a confined space where the apparatus to malfunction.
ventilation is poor as this may cause overheating.
• Do not block the ventilation slots by putting anything On replacement of parts
on the system. The system is equipped with a high • In the events that this unit is repaired, repaired parts
power amplifier. If the ventilation slots are blocked, may be collected for reuse or recycling purposes.
the unit can overheat and malfunction.
On your TV’s color
• Do not place the unit on surfaces (rugs, blankets, etc.)
or near materials (curtains, draperies) that may block • If the speakers should cause the TV screen to have
the ventilation slots. color irregularity, turn off the TV then turn it on after
• Do not install the unit in a confined space, such as a 15 to 30 minutes. If color irregularity should persist,
bookshelf or similar unit. place the speakers further away from the TV set.
• Do not install the unit near heat sources such as
radiators, air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
• Do not install the unit in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the unit and discs away from components with
strong magnets, such as microwave ovens, or large
loudspeakers.
120US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb11add.fm] masterpage:Right
specdef v20070110
IMPORTANT NOTICE
Caution: This system is capable of holding a still Notes about the Discs
video image or on-screen display image on your
television screen indefinitely. If you leave the still On handling discs
video image or on-screen display image displayed • To keep the disc clean, handle the disc by its
on your TV for an extended period of time you risk
edge. Do not touch the surface.
permanent damage to your television screen.
Projection televisions are especially susceptible to
• Do not stick paper or tape on the disc.
this.
On moving the system

Before moving the system, make sure that there is no
disc inserted, and remove the AC power cord (mains
lead) from the wall outlet (mains).
• Do not expose the disc to direct sunlight or
About S-AIR function heat sources such as hot air ducts, or leave it in
• As the S-AIR function transmits sound by radio
a car parked in direct sunlight as the
waves, sound may skip when radio waves are temperature may rise considerably inside the
obstructed. This is a characteristic of radio waves and car.
is not malfunction. • After playing, store the disc in its case.
• As the S-AIR function transmits sound by radio
waves, equipment that generates electromagnetic On cleaning
energy, such as a microwave oven, may interfere with • Before playing, clean the disc with a cleaning
Additional Information
sound transmission. cloth.
• As the S-AIR function uses the radio waves that share Wipe the disc from the center out.
the same frequency as other wireless systems, such as
wireless LAN or Bluetooth, interference or poor
transmission may result. In this case, take the
following steps:
– Do not install the system near other wireless
systems.
– Do not use the system and the other wireless
systems at the same time. • Do not use solvents such as benzine, thinner,
• The transmission distance differs depending on the commercially available cleaners, or anti-static
usage environment. Find a location where spray intended for vinyl LPs.
transmission between the S-AIR main unit and sub
unit is most effective, and install the S-AIR main unit This system can only play back a standard
and sub unit there. circular disc. Using neither standard nor circular
discs (e.g., card, heart, or star shape) may cause
About the surround amplifier a malfunction.
• The nameplate is located on the side exterior.
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
121US

[4-109-708-14(1)]
specdef v20070110
Troubleshooting
If you experience any of the following difficulties while using the system, use this troubleshooting
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your
nearest Sony dealer.
Note that if service personnel changes some parts during repair, these parts may be retained.
In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together
(S-AIR main unit and sub unit).
Power
Symptom Remedy
The power is not turned on. • Check that the AC power cord (mains lead) is connected securely.
• Press "/1 after “STANDBY” disappears from the front panel display.
If “PROTECTOR” and “PUSH Press "/1 to turn off the system, and check the following items after
POWER” appear alternately in “STANDBY” disappears.
the front panel display. • Are the + and – speaker cords short-circuited?
• Are you using only the specified speakers?
• Is anything blocking the ventilation holes of the system?
• After checking the above items and fixing any problems, turn on the system. If
the cause of the problem cannot be found even after checking all the above
items, consult your nearest Sony dealer.
122US

[4-109-708-14(1)]
specdef v20070110
Picture
Symptom Remedy
There is no picture. • The video connecting cords are not connected securely.
• The video connecting cords are damaged.
• The unit is not connected to the correct TV input jack (page 48).
• The video input on the TV is not set so that you can view pictures from the
system.
• Check the output method on your system (page 48).
• Re-connect the connecting cord securely.
• The unit is connected to an input device that is not HDCP (High-bandwidth
Digital Content Protection) compliant (“HDMI” on the front panel does not
light up) (page 48).
• When playing a double-layer DVD, the video and audio may be momentarily
interrupted at the point where the layers switch.
No picture appears when the • Press and hold H and A on the unit for more than 5 seconds to reset the video
video output resolution selected output resolution to the lowest resolution.
in [Output Video Format] is
incorrect.
Video signals are not output • Set [Output Video Format] to [Component Video] in [Video Settings]
from the jacks, other than from (page 109).
the HDMI OUT jack, when
connecting the HDMI OUT jack
and other video output jacks at
the same time.
The dark area of the picture is too • Set [Picture Quality Mode] to [Standard] (default) (page 72).
dark/the bright area is too bright
or unnatural.
The picture is not output • Check the [Output Video Format] settings in [Video Settings] (page 109).
correctly.
Picture noise appears. • The disc is dirty or flawed.
• If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some BD/DVD programs could affect
picture quality. If you still experience problems even when you connect your
unit directly to your TV, try connecting your unit to the other input jacks
(page 48).
Even though you set the aspect • The aspect ratio on the disc is fixed.
ratio in [TV Type] of [Video
Settings], the picture does not fill
the TV screen.
Color irregularity occurs on the • If the speakers are used with a CRT-based TV or projector, install the speakers
TV screen. at least 0.3 meters (1.0 ft) from the TV set.
• If the color irregularity persists, turn off the TV set once, then turn it on after 15
to 30 minutes.
• If howling occurs, reposition the speakers farther away from the TV set.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
123US

[4-109-708-14(1)]
specdef v20070110
Sound
Symptom Remedy
There is no sound. • The speaker cord is not connected securely.
• Press MUTING on the remote if “MUTING ON” is displayed in the front panel
display.
• The system is in pause mode. Press H to return to normal play mode.
• Fast forward or fast reverse is performed. Press H to return to normal play
mode.
• Check the speaker settings (page 100).
No sound is output from the • The HDMI OUT jack is connected to a DVI (Digital Visual Interface) device
HDMI OUT jack. (DVI (Digital Visual Interface) jacks do not accept audio signals).
• Try the following: 1 Turn the system off and on again. 2 Turn the connected
component off and on again. 3 Disconnect and then connect the HDMI cable
again.
• Set [Audio (HDMI)] in [HDMI Settings] to [TV+AMP] (page 115).
The Super Audio CD sound of a • HDMI1 and HDMI2 does not accept an audio format that contains copy
component that is connected to protection (page 133). Connect the analog audio output of the component to the
the HDMI1 or HDMI2 jack is SAT/CABLE IN (AUDIO R/L) or TV (AUDIO IN R/L) jacks of the unit.
not output.
The left and right sounds are • Check that the speakers and components are connected correctly and securely.
unbalanced or reversed.
There is no sound from the • Check the speaker connections and settings (pages 45, 100).
subwoofer. • Select “A.F.D. STD” for the decoding mode (page 77).
Severe hum or noise is heard. • Check that the speakers and components are connected securely.
• Check that the connecting cords are away from a transformer or motor, and at
least 3 meters (10 ft) away from your TV set or a fluorescent light.
• Move your TV away from the audio components.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with
alcohol.
• Clean the disc.
The sound loses stereo effect • Select stereo sound by pressing AUDIO (page 81).
when you play a CD. • Make sure the unit is connected properly.
The surround effect is difficult to • Make sure the decoding mode setting (page 77).
hear when you are playing a • Check the speaker connections and settings (pages 45, 100).
sound track of Dolby Digital, • Depending on the BD/DVD, the output signal may not be the entire 5.1 channel.
DTS, or MPEG audio. It may be monaural or stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
The sound comes from the center • Depending on the disc, the sound may come from the center speaker only.
speaker only.
No sound is heard from the • Check the speaker connections and settings (pages 45, 100).
center speaker. • Make sure the decoding mode setting (page 77).
• Depending on the source, the effect of the center speaker may be less
noticeable.
• A 2 channel source is being played.
No sound or only a very low- • Check the speaker connections and settings (pages 45, 100).
level sound is heard from the • Make sure the decoding mode setting (page 77).
surround speakers. • Depending on the source, the effect of the surround speakers may be less
noticeable.
• Check the wireless setting (page 58).
• A 2 channel source is being played.
124US

[4-109-708-14(1)]
specdef v20070110
Symptom Remedy
The beginning of the sound is cut • Set the sound mode to “MOVIE” or “MUSIC” (page 80).
off. • Select “A.F.D. STD” for the decoding mode (page 77).
Operation
Symptom Remedy
Radio stations cannot be tuned • Check that the antenna (aerial) is connected securely. Adjust the antenna
in. (aerial) or connect an external antenna (aerial) if necessary.
• The signal strength of the stations is too weak (when tuning in with automatic
tuning). Use direct tuning.
• No stations have been preset or the preset stations have been cleared (when
tuning by scanning preset stations). Preset the stations (page 83).
• Press DISPLAY so that the frequency appears in the front panel display.
Noise is heard on AM radio. • Check the location of the AM loop antenna (aerial) and cord (page 53).
The remote does not function. • There are obstacles between the remote and the unit.
• The distance between the remote and the unit is too far.
• The remote is not pointed at the remote sensor on the unit.
• The batteries in the remote are weak.
The disc does not play. • The disc is dirty.
• There is no disc inserted.
• The disc is upside down.
Insert the disc with the playback side facing down.
• The disc is skewed on the disc tray.
• You are attempting to play a disc with a format that cannot be played back by
this system (page 130).
• The region code on the BD/DVD does not match the system.
• Moisture has condensed inside the unit and may cause damage to the lenses.
Remove the disc and leave the unit turned on for about half an hour.
• The system cannot play a recorded disc that is not correctly finalized
(page 130).
The JPEG image file cannot be • The following photo files cannot be played.
played. – Photo files larger than 8,192 pixels (width or height)
– Photo files smaller than 15 pixels (width or height)
– Photo files exceeding 32 MB
– Photo files with extreme aspect ratios (greater than 50:1 or 1:50)
– Photo files in Progressive JPEG format
– Photo files that have a “.jpeg” or “.jpg” extension, but not in JPEG format
– Photo files recorded on BD-Rs in any format other than UDF (Universal
Disk Format) 2.6
– Photo files recorded on BD-REs in any format other than UDF (Universal
Disk Format) 2.5
• Photo files edited on a PC may not be played.
• It does not fit the TV screen.
The file name are not displayed • The system can only display ISO 8859-1-compliant character formats. Other
correctly. character formats may be displayed differently.
• Depending on the writing software used, the input characters may be displayed
differently.
125US

[4-109-708-14(1)]
specdef v20070110
Symptom Remedy
A disc does not start playing • Resume Play has been selected.
from the beginning. Press OPTIONS and select [Play from Beginning], then press .
• The title or BD/DVD menu automatically appears on the TV screen.
The system starts playing the • The BD/DVD features an auto playback function.
disc automatically.
Playback stops automatically. • Some discs may contain an auto pause signal. While playing such a disc, the
system stops playback at the auto pause signal.
You cannot perform some • Depending on the disc, you may not be able to perform some of the operations
functions such as stop or search. above. Refer to the operating instructions supplied with the disc.
Messages do not appear on the • In the Setup Display, select the desired language for the on-screen display in
TV screen in the language you [OSD] in [System Settings] (page 116).
want.
The language for the soundtrack/ • Try using the BD’s or DVD’s menu instead of the direct selection button on the
subtitle or angles cannot be remote (page 69).
changed. • Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or
DVD being played.
• The BD or DVD prohibits the changing of the language for the sound track/
subtitle or angles.
The disc tray does not open and • Try the following: 1 Press and hold VOLUME – and A on the unit for more
you cannot remove the disc even than 5 seconds to open the disc tray. 2 Remove the disc. 3 Disconnect the AC
after you press A. power cord (mains lead) from the wall outlet (mains), then reconnect after
several minutes.
A disc cannot be ejected and • Contact your Sony dealer or local authorized Sony service facility.
“LOCKED” appears in the front
panel display.
The system does not work • Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
normally. reconnect after several minutes.
The Control for HDMI function • When “HDMI” does not light up in the front panel display, check the HDMI
does not work. connection (page 48).
• Set [Control for HDMI] in [HDMI Settings] to [On] (page 114).
• Make sure that the connected component is compatible with the [Control for
HDMI] function.
• Check that the AC power cord (mains lead) of the connected component is
connected securely.
• Check the connected component’s setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set [Control for HDMI] in [HDMI
Settings] to [Off], then set [Control for HDMI] in [HDMI Settings] to [On]
(page 114).
• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
(page 95).
No sound is output from the • Make sure that the connected TV is compatible with the System Audio Control
system and TV while using the function.
System Audio Control function. • For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
(page 95).
The external memory is not • Try the following: 1 Turn the system off. 2 Align the V mark of the
recognized. EXTERNAL slot with the V mark on the external memory, and insert the
external memory (page 55). 3 Turn the system on. 4 Check that the
EXTERNAL indicator lights up in the front panel display.
126US

[4-109-708-14(1)]
specdef v20070110
Symptom Remedy
Bonus contents or other data that • Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
are contained in a BD-ROM re-insert the external memory (page 55). 4 Turn the system on. 5 Check that
cannot be played. the EXTERNAL indicator lights up in the front panel display. 6 Insert the BD-
ROM with BonusView/BD-Live.
A message indicating that the • Delete unnecessary data in the external memory (page 69).
local storage does not have
enough space appears on the
screen.
The unit does not work and • Set the child lock function to off (page 106).
“CHILD LOCK” appears in the
front panel display when you
press any button on the unit.
The S-AIR function

Symptom Remedy
S-AIR connection is not • If you use another S-AIR main unit, place it more than 8 m (26 1/4 feet) away
established (sound transmission from the unit.
is not established), e.g., the • Confirm the ID of the unit and S-AIR sub unit (page 89).
indicator of the S-AIR sub unit • You performed pairing the unit and another S-AIR sub unit. Perform pairing of
does the following: the desired S-AIR sub unit (page 92).
• Turns off. • The unit is paired to another S-AIR sub unit. To cancel pairing, reset the ID of
• Flashes. the unit and S-AIR sub unit (page 89).
• Turns red. • Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Stop using another wireless product.
• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
connected and turn on the S-AIR sub unit.
No sound is heard from the • If you use another S-AIR main unit, place it more than 8 m (26 1/4 feet) away
S-AIR sub unit. from the unit.
• Confirm the ID of the unit and S-AIR sub unit (page 89).
• Confirm the pairing setting (page 92).
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Change the [S-AIR RF Change] setting (page 94).
• Change the ID settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn on them.
There is noise or the sound skips. • If you use another S-AIR main unit, place it more than 8 m (26 1/4 feet) away
from the unit.
• Install the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Install the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Change the [S-AIR RF Change] setting (page 94).
• Change the ID settings of the S-AIR main unit and S-AIR sub unit.
127US

[4-109-708-14(1)]
specdef v20070110
Surround amplifier operation

If no sound is output from the surround speakers, check the status of the POWER / ON LINE indicator
on the surround amplifier. For details of the POWER / ON LINE indicator, see “Step 4: Setting up the
Wireless System” (page 58).
Symptom Remedy
The power is not turned on. • Check that the AC power cord (mains lead) is connected securely.
The POWER / ON LINE Turn off the surround amplifier and remove the AC power cord (mains lead) of
indicator does not turn on. the surround amplifier, then check the following items.
• Are the + and – speaker cords short-circuited?
• Is anything blocking the ventilation holes of the surround amplifier?
• After checking the above items and fixing any problems, connect the AC power
cord (mains lead) of the surround amplifier and turn on the surround amplifier.
If the cause of the problem cannot be found even after checking all the above
items, consult your nearest Sony dealer.
There is no sound. • turns green
Check the status of the – Check the speaker connections and settings.
POWER / ON LINE indicator on – The volume of the unit is set to minimum.
the surround amplifier. – The unit is in muting status.
– Depending on the source or the settings of the unit, the effect of the speakers
may be less noticeable.
– Headphones are connected.
• flashes green
– The unit is not turned on.
– You performed pairing the unit and another S-AIR sub unit.
– The surround amplifier is paired to another S-AIR main unit.
– Confirm the IDs of the unit and surround amplifier (page 89).
– Pairing operation is not completed.
– Sound transmission is poor.
Move the surround amplifier so that the POWER / ON LINE indicator turns
green.
– Install the unit and surround amplifier apart from another wireless product.
– Stop using another wireless product.
– The wireless transceiver(s) is/are not inserted correctly.
• turns red
– Change the SURROUND SELECTOR switch (SURROUND or
SURROUND BACK) of the surround amplifier to match the unit.
“HP NO LINK” and “VOLUME • Volume becomes the minimum when you turn off the surround amplifier with
MIN” appear alternately in the headphones connected before you turn off the unit or if radio reception is poor.
front panel display, and the In these cases, check radio reception, and set the volume again.
volume of the unit becomes
minimum.
128US

[4-109-708-14(1)]
specdef v20070110
Self-diagnosis Function
When the self-diagnosis function is activated to
prevent the system from malfunctioning, an
error code appears in the front panel display, or
just appears without any messages on the
entire screen. In these cases, check the
following.
When an error code appears in

the front panel display
Error code Corrective action

Exxxx Contact your nearest Sony dealer or
local authorized Sony service
facility and give the error code.
SYSTEM Turn off the system, then turn it on.
ERROR If the system does not work
normally, consult your nearest Sony
dealer or local authorized Sony
service facility.
When just appears without
any messages on the entire
screen
Contact your nearest Sony dealer or local
authorized Sony service facility.
129US

[4-109-708-14(1)]
specdef v20070110
Playable Discs
Type Disc logo Characteristics Icon
Blu-ray Disc BD-ROMs and BD-REs/BD-Rs in
BDMV and BDAV mode, including
8 cm discs (single layer) and DL
discs
DVD VIDEO
Discs such as movies that can be
purchased or rented
DVD/DATA DVD DVD+RWs/DVD+Rs in +VR mode

or DVD-RWs/DVD-Rs in video and
VR mode, including 8 cm discs
(single layer) and DVD+R DL/
DVD-R DL discs
DVD+RWs/DVD+Rs/DVD-RWs/
DVD-Rs containing JPEG* image
files
CD
Music CDs or CD-Rs/CD-RWs in
music CD format
DATA CD – CD-Rs/CD-RWs containing JPEG

image files
* JPEG format conforming to UDF (Universal Disk Format).
Notes about BD-ROM compatibility

Since the Blu-ray Disc specifications are new and evolving, some discs may not be playable depending
on the disc type and the version.
The audio output differs depending on the source, connected output jack, and selected audio settings.
Discs that cannot be played

• BDs with cartridge
• DVD-RAMs
• HD DVDs
• DVD Audio discs
• PHOTO CDs
• Data part of CD-Extras
• VCDs/Super VCDs
• HD layer on Super Audio CDs
• BD-ROMs/DVD VIDEOs with a different region code (page 131).
• A disc recorded in a color system other than NTSC, such as PAL (this system conforms to the NTSC
color system).
130US

[4-109-708-14(1)]
specdef v20070110
Note on playback operations of a BD/DVD

Some playback operations of a BD/DVD may be intentionally set by software producers. Since this
system plays a BD/DVD according to the disc contents the software producers designed, some
playback features may not be available. Refer to the instructions supplied with the BD/DVD.
Region code (BD-ROM/DVD VIDEO only)

Your system has a region code printed on the rear of the unit and will only play a BD-ROM/DVD
VIDEO (playback only) labeled with identical region codes. This system is used to protect copyrights.
DVD VIDEO labeled ALL will also play on this system.
If you try to play any other DVD VIDEO, the message [Playback prohibited by region code.] will
appear on the TV screen. Depending on the BD-ROM/DVD VIDEO, no region code may be indicated
even though playing the BD-ROM/DVD VIDEO is prohibited by area restrictions.
Notes about BD-REs/BD-Rs, DVD+RWs/DVD+Rs, DVD-RWs/DVD-Rs, or

CD-Rs/CD-RWs
Some BD-REs/BD-Rs, DVD+RWs/DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/CD-RWs cannot be
played on this system due to the recording quality or physical condition of the disc, or the
characteristics of the recording device and authoring software.
A DVD disc will not play if it has not been correctly finalized. For more information, refer to the
operating instructions supplied with the recording device. Note that some playback functions may not
work with some DVD+RWs/DVD+Rs, even if they have been correctly finalized. In this case, view
the disc using normal playback.
Music discs encoded with copyright protection technologies
This product is designed to play back discs that conform to the Compact Disc (CD) standard. Various
music discs encoded with copyright protection technologies are being marketed by some record
companies. Please be aware that among those discs, there are some that do not conform to the CD
standard and may not be playable by this product.
Note on DualDiscs
A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital
audio material on the other side. However, since the audio material side does not conform to the
Compact Disc (CD) standard, playback on this product is not guaranteed.
Note about double-layer DVDs

The playback pictures and sound may be momentarily interrupted when the layers switch.
Note about 8 cm BD-REs/8 cm BD-Rs

Some 8 cm BD-REs/8 cm BD-Rs cannot be played on this system.
Note about BD-REs/BD-Rs

This system supports Ver. 2.1 BD-RE and Ver. 1.1 and 1.2 BD-R including organic pigment type BD-
R (LTH type).
131US

[4-109-708-14(1)]
specdef v20070110
About playback of discs recorded in AVCHD format

This system can play AVCHD format discs.
TM
What is the AVCHD format?

The AVCHD format is a high-definition digital video camera format used to record SD (standard
definition) or HD (high definition) signals of either the 1080i specification* or the 720p specification**
on DVDs, using efficient data compression coding technology. The MPEG-4 AVC/H.264 format is
adopted to compress video data, and the Dolby Digital or Linear PCM system is used to compress audio
data. The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than that
of the conventional image compressing format. The MPEG-4 AVC/H.264 format enables a high
definition (HD) video signal shot on a digital video camera recorder to be recorded on DVD discs, in
the same way as it would be for a standard definition (SD) television signal.
* A high-definition specification which utilizes 1080 effective scanning lines and the interlace system.
** A high-definition specification which utilizes 720 effective scanning lines and the progressive system.
Note
• Some AVCHD format discs may not play, depending on the recording condition.
• The AVCHD format disc will not play if it has not been correctly finalized.
132US

[4-109-708-14(1)]
specdef v20070110
Supported Audio Formats

Audio formats supported by this system are as follows.
Format
LPCM 2ch LPCM 5.1ch, Dolby Dolby Digital Dolby DTS, DTS-HD DTS-HD
LPCM 7.1ch Digital, Plus TrueHD DTS-ES High Master
Function Dolby Digital Discrete 6.1, Resolution Audio
EX DTS-ES Audio
Matrix 6.1,
DTS96/24
“BD/DVD” a a a a a a a a*
“HDMI1” a a a a a a a a
“HDMI2”
“SAT/CABLE” a – a – – a – –
“TV”
(DIGITAL IN)
a: Supported format.
–: Unsupported format.
* When [Output Video Format] is set to [Video or S Video] (page 110), or [HDMI Resolution]/[Component
Resolution] is set to [480i] or [480p] (page 110), the sound is DTS decoded.
Note
• The table above is valid only when you set [BD Audio Setting] to [Direct] (page 111) and [Fs Limit] to [Off]
(page 111). If another setting is used, depending on the audio format, sound may be decoded to a suitable format
automatically.
• HDMI1 and HDMI2 do not input sound in the case of an audio format that contains copy protections such as Super
Audio CD or DVD-Audio.
133US

[4-109-708-14(1)]
specdef v20070110
Video Output Resolution

Output resolution differs depending on the [Output Video Format] setting in [Video Settings]
(page 109).
When [Output Video Format] is set to When [Output Video Format] is set to
[HDMI] [Component Video]
Resolution VIDEO OUT VIDEO OUT
setting COMPONENT COMPONENT
(VIDEO, HDMI OUT (VIDEO, HDMI OUT
VIDEO OUT VIDEO OUT
S VIDEO) jack S VIDEO) jack
jack jacks
jack jack
480i 480i 480i 480i 480i 480i 480i
480p 480i 480i 480p 480i 480p 480p
720p 480i 480i 720p 480i 720p* 720p*
1080i 480i 480i 1080i 480i 1080i* 1080i*
1080p no picture no picture 1080p unselectable unselectable unselectable
* Protected contents on DVDs are output at 480p resolution.
When [Output Video Format] is set to [Video or S Video]

480i video signals are output from the VIDEO OUT (VIDEO, S VIDEO) or COMPONENT VIDEO
OUT jack, and 480p video signals are output from the HDMI OUT jack.
Note
• The video input signal from the SAT/CABLE IN (VIDEO) jack or COMPONENT VIDEO IN (SAT/CABLE) jacks
is not output from the VIDEO OUT (S VIDEO) jack.
About the video output resolution of a connected component
Resolution of the output video signal

Resolution
Function Input jack of the input VIDEO OUT VIDEO OUT COMPONENT
HDMI OUT
video signal (VIDEO) (S VIDEO) VIDEO OUT
jack
jack jack jacks
VIDEO IN 480i 480i no picture no picture 480p
jack
480i no picture no picture 480i 480p
“SAT/CABLE” COMPONENT 480p no picture no picture 480p 480p
VIDEO IN
jacks 720p no picture no picture 720p 720p
1080i no picture no picture 1080i 1080i
“DMPORT”* DMPORT 480i 480i no picture no picture 480p
jack
* Available only when connecting a DIGITAL MEDIA PORT adapter that can output video signal.
Note
• You cannot change the video output resolution of a connected component.
134US

[4-109-708-14(1)]
specdef v20070110
distortion from 250 milli

Specifications Subwoofer:
watts to rated output.
With 4 ohms loads, both
channels driven, from 30 -
Amplifier Section 800 Hz; rated 75 watts per
(HCD-IT1000ES) channel minimum RMS
POWER OUTPUT AND TOTAL HARMONIC power, with no more than
DISTORTION: 0.7% total harmonic
(FTC Output Power) distortion from 250 milli
for the US model watts to rated output.
Front L/Front R: With 3.5 ohms loads, both
channels driven, from 200 Power output (rated) for the Canadian model
- 20,000 Hz; rated 50 watts Front L/ Front R 35 W + 35 W
per channel minimum (at 10 ohms, 1 kHz, 1 %
RMS power, with no more THD)
than 0.7% total harmonic RMS output power (reference)
distortion from 250 milli Front L / Front R*: 50 W + 50 W
watts to rated output. (at 10 ohms, 1 kHz, 10 %
Subwoofer: With 2 ohms loads, from THD)
30 - 200 Hz; rated 75 watts Center*: 50 W
per channel minimum (at 10 ohms, 1 kHz, 10 %
RMS power, with no more THD)
than 0.7% total harmonic Subwoofer*: 100 W
distortion from 250 milli (at 4 ohms, 70 Hz, 10 %
watts to rated output.
THD) + 100 W (at 4 ohms,
500 Hz, 10 % THD)
Power output (rated) for the Canadian model
* Depending on the decoding mode settings and the
Front L/ Front R 80 W + 80 W
(at 3.5 ohms, 1 kHz, 1 % source, there may be no sound output.
THD) Inputs (Analog)
RMS output power (reference) TV, SAT/CABLE Sensitivity: 450 mV (ATT
Front L / Front R*: 100 W + 100 W ON), 250 mV (ATT OFF)
(at 3.5 ohms, 1 kHz, 10 % Impedance: 50 kilohms
THD) Inputs (Digital/COAXIAL)
Center*: 100 W SAT/CABLE Impedance: 75 ohms
(at 3.5 ohms, 1 kHz, 10 %
THD) Video Section
Subwoofer*: 200 W Outputs VIDEO: 1 Vp-p 75 ohms
(at 2 ohms, 100 Hz, 10 % S VIDEO:
THD) Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
* Depending on the decoding mode settings and the
COMPONENT:
source, there may be no sound output. Y: 1 Vp-p 75 ohms
Amplifier Section PB/CB, PR/CR: 0.7 Vp-p
(HCD-IS1000) 75 ohms
Inputs VIDEO: 1 Vp-p 75 ohms
POWER OUTPUT AND TOTAL HARMONIC
COMPONENT:
DISTORTION:
Y: 1 Vp-p 75 ohms
(FTC Output Power)
PB/CB, PR/CR: 0.7 Vp-p
for the US model
75 ohms
Front L/Front R: With 10 ohms loads, both
channels driven, from 800 HDMI section
- 20,000 Hz; rated 35 watts Connector HDMI 19pin-standard
per channel minimum connector
RMS power, with no more Video inputs HDMI1, HDMI2:
than 0.7% total harmonic 640 × 480p@60 Hz
720 × [email protected]/60 Hz
135US

[4-109-708-14(1)]
specdef v20070110
720 × [email protected]/60 Hz Mass (approx.) 0.5 kg (1 lb 1 3/4 oz)

1280 × [email protected]/60 Hz 0.5 kg (1 lb 1 3/4 oz) with
1920 × [email protected]/ the wall mounting brackets
60 Hz 1.0 kg (2 lbs 3 1/2 oz) with
1920 × [email protected]/ the desktop stand
60 Hz
Center (SS-ITC1)
720 × 576i@50 Hz
Speaker system 2-way speaker system,
720 × 576p@50 Hz
Bass reflex
1280 × 720p@50 Hz
Speaker unit 16 mm × 120 mm (21/32 in
1920 × 1080i@50 Hz
× 4 3/4 in), cone type × 3
1920 × 1080p@50 Hz
Rated impedance 3.5 ohms
1920 × 1080p@24 Hz
Dimensions (approx.) 540 mm × 19.5 mm × 30.5
BD/DVD/CD System mm (21 3/8 in × 25/32 in ×
Laser Semiconductor laser 1 1/4 in) (w/h/d)
(BD: λ = 405 nm) 597 mm × 19.5 mm × 35
(DVD: λ = 650 nm) mm (23 5/8 in × 25/32 in ×
(CD: λ = 790 nm) 1 7/16 in) (w/h/d) with the
Emission duration: wall mounting brackets
continuous Mass (approx.) 0.5 kg (1 lb 1 3/4 oz)
Signal format system NTSC 0.5 kg (1 lb 1 3/4 oz) with
Tuner Section the wall mounting brackets
System PLL quartz-locked digital Surround (SS-ITR1)
synthesizer Speaker system Full range speaker system,
FM tuner section Bass reflex
Tuning range 87.5 MHz - 108.0 MHz Speaker unit 16 mm ×120 mm (21/32 in ×
(100 kHz step) 4 3/4 in), cone type × 2
Antenna (aerial) FM wire antenna (aerial) Rated impedance 3.5 ohms
Antenna (aerial) terminals 75 ohms, unbalanced Dimensions (approx.) 19.5 mm × 546 mm × 30.5
Intermediate frequency 10.7 MHz mm (25/32 in × 21 1/2 in ×
AM tuner section 1 1/4 in) (w/h/d)
Tuning range 530 kHz - 1,710 kHz (with 19.5 mm × 602 mm × 35
the interval set at 10 kHz) mm (25/32 in × 23 3/4 in ×
531 kHz - 1,710 kHz (with 1 7/16 in) (w/h/d) with the
the interval set at 9 kHz) wall mounting brackets
Antenna (aerial) AM loop antenna (aerial) 121 mm × 560 mm × 121
Intermediate frequency 450 kHz mm (4 7/8 in × 22 1/8 in ×
Speakers (BDV-IT1000ES) 4 7/8 in) (w/h/d) with the
desktop stand
Front (SS-ITF1) Mass (approx.) 0.4 kg (14 1/4 oz)
Speaker system 2-way speaker system, 0.4 kg (14 1/4 oz) with the
Bass reflex wall mounting brackets
Speaker unit 16 mm ×120 mm (21/32 in × 0.9 kg (1 lb 15 7/8 oz) with
4 3/4 in), cone type × 3 the desktop stand
Rated impedance 3.5 ohms
Dimensions (approx.) 19.5 mm × 546 mm × 30.5 Subwoofer (SS-ITW1)
mm (25/32 in × 21 1/2 in ×
Speaker system Subwoofer system, Bass
1 1/4 in) (w/h/d)
reflex
19.5 mm × 602 mm × 35
Speaker unit 150 mm (6 in), cone type ×
mm (25/32 in × 23 3/4 in ×
2
1 7/16 in) (w/h/d) with the
Rated impedance 2 ohms
wall mounting brackets
Dimensions (approx.) 196 mm × 410 mm × 372
121 mm × 560 mm × 121
mm (7 3/4 in × 16 1/4 in ×
mm (4 7/8 in × 22 1/8 in ×
14 3/4 in) (w/h/d)
4 7/8 in) (w/h/d) with the
Mass (approx.) 10.5 kg (22 lbs 18 1/2 oz)
desktop stand
136US

[4-109-708-14(1)]
specdef v20070110
Speakers (BDV-IS1000) Surround amplifier (TA-SA100WR)

Front/Center/Surround (SS-IS15) Amplifier Section (BDV-IT1000ES)
Speaker system Full range speaker system AUDIO POWER SPECIFICATIONS
Speaker unit 35 mm (1 7/16 in), cone for the US model
type POWER OUTPUT AND TOTAL HARMONIC
Rated impedance 10 ohms DISTORTION:
Dimensions (approx.) 45 mm × 55 mm × 40 mm With 3.5 ohms loads, both
(1 13/16 in × 2 1/4 in × channels driven, from 200
1 5/8 in) (w/h/d) - 20,000 Hz; rated 50 watts
Mass (approx.) 0.07 kg (3 oz) per channel minimum
RMS power, with no more
Subwoofer (SS-ISW1) than 0.7% total harmonic
Speaker system 2-way subwoofer system, distortion from 250 milli
Bass reflex watts to rated output.
Speaker unit 120 mm (4 3/4 in), cone Power output (rated) for Canadian model
type + 160 mm (6 3/8 in), 80 W + 80 W
cone type (at 3.5 ohms, 1 kHz, 1 %
Rated impedance 4 ohms THD)
Dimensions (approx.) 196 mm × 360 mm × 372 RMS output power (reference)
mm (7 3/4 in × 14 1/4 in × 100 W + 100 W
14 3/4 in) (w/h/d) (at 3.5 ohms, 1 kHz, 10 %
Mass (approx.) 9.0 kg (19 lbs 13 3/4 oz) THD)
Amplifier Section (BDV-IS1000)
General AUDIO POWER SPECIFICATIONS
Power requirements 120 V AC, 60 Hz for the US model
Power consumption On: 140 W POWER OUTPUT AND TOTAL HARMONIC
(BDV-IT1000ES) Standby: 0.3 W (at the DISTORTION:
Power Saving mode) With 10 ohms loads, both
Power consumption On: 100 W channels driven, from 800
(BDV-IS1000) Standby: 0.3 W (at the - 20,000 Hz; rated 35 watts
Power Saving mode) per channel minimum
Output voltage/current RMS power, with no more
(DIGITAL MEDIA PORT) than 0.7% total harmonic
DC 5 V/700 mA distortion from 250 milli
LAN (100) 100BASE-TX Terminal watts to rated output.
EXTERNAL External memory slot (For Power output (rated) for Canadian model
connecting the external 35 W + 35 W
memory) (at 10 ohms, 1 kHz, 1 %
DC output: 5 V 500 mA THD)
Max RMS output power (reference)
Dimensions (approx.) 430 mm × 125 mm × 355 50 W + 50 W
mm (17 in × 5 in × 14 in) (at 10 ohms, 1 kHz, 10 %
(w/h/d) incl. projecting THD)
parts
430 mm × 125 mm × 385 Rated impedance 3 - 16 Ω
mm (17 in × 5 in × 15 1/4
in) (w/h/d) with the General
wireless transceiver Power requirements 120 V AC, 60 Hz
inserted Power consumption On: 50 W
Mass (approx.) 10 kg (22 lbs 1 oz) Dimensions (approx.) 85 mm × 100 mm × 330
mm (3 3/8 in × 4 in × 13 in)
(w/h/d) (incl. EZW-RT10)
85 mm × 100 mm × 345
mm (3 3/8 in × 4 in × 13 5/8
in) (w/h/d) incl. speaker
137US

[4-109-708-14(1)]
specdef v20070110
cord cover and speaker

cord holder
Mass (approx.) 1.7 kg (3 lb 12 oz) incl.
speaker cord cover and
speaker cord holder
Wireless transceiver (EZW-RT10)
Communication system S-AIR Specification
version 1.0
Output 12.0 mW
Frequency band 2.4000 GHz - 2.4835 GHz
Modulation method DSSS
Power requirements DC 3.3 V, 350 mA
Dimensions (approx.) 50 mm × 13 mm × 60 mm
(2 in × 17/32 in × 2 3/8 in) (w/
h/d)
Mass (approx.) 24 g (1 oz)
Design and specifications are subject to change

without notice.
• Standby power consumption 0.3 W.

• Halogenated flame retardants are not
used in the printed wiring boards.
• Over 85% power efficiency of
amplifier block is achieved with the
full digital amplifier, S-Master.
138US

[4-109-708-14(1)]
specdef v20070110
Language Code List

The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language Code Language Code Language Code Language

1027 Afar 1183 Irish 1347 Maori 1507 Samoan
1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona
1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali
1039 Amharic 1196 Guarani 1352 Mongolian 1511 Albanian
1044 Arabic 1203 Gujarati 1353 Moldavian 1512 Serbian
1045 Assamese 1209 Hausa 1356 Marathi 1513 Siswati
1051 Aymara 1217 Hindi 1357 Malay 1514 Sesotho
1052 Azerbaijani 1226 Croatian 1358 Maltese 1515 Sundanese
1053 Bashkir 1229 Hungarian 1363 Burmese 1516 Swedish
1057 Byelorussian 1233 Armenian 1365 Nauru 1517 Swahili
1059 Bulgarian 1235 Interlingua 1369 Nepali 1521 Tamil
1060 Bihari 1239 Interlingue 1376 Dutch 1525 Telugu
1061 Bislama 1245 Inupiak 1379 Norwegian 1527 Tajik
1066 Bengali; 1248 Indonesian 1393 Occitan 1528 Thai
Bangla 1253 Icelandic 1403 (Afan)Oromo 1529 Tigrinya
1067 Tibetan 1254 Italian 1408 Oriya 1531 Turkmen
1070 Breton 1257 Hebrew 1417 Punjabi 1532 Tagalog
1079 Catalan 1261 Japanese 1428 Polish 1534 Setswana
1093 Corsican 1269 Yiddish 1435 Pashto; 1535 Tonga
1097 Czech 1283 Javanese Pushto 1538 Turkish
1103 Welsh 1287 Georgian 1436 Portuguese 1539 Tsonga
1105 Danish 1297 Kazakh 1463 Quechua 1540 Tatar
1109 German 1298 Greenlandic 1481 Rhaeto- 1543 Twi
1130 Bhutani 1299 Cambodian Romance 1557 Ukrainian
1142 Greek 1300 Kannada 1482 Kirundi 1564 Urdu
1144 English 1301 Korean 1483 Romanian 1572 Uzbek
1145 Esperanto 1305 Kashmiri 1489 Russian 1581 Vietnamese
1149 Spanish 1307 Kurdish 1491 Kinyarwanda 1587 Volapük
1150 Estonian 1311 Kirghiz 1495 Sanskrit 1613 Wolof
1151 Basque 1313 Latin 1498 Sindhi 1632 Xhosa
1157 Persian 1326 Lingala 1501 Sangho 1665 Yoruba
1165 Finnish 1327 Laothian 1502 Serbo- 1684 Chinese
1166 Fiji 1332 Lithuanian Croatian 1697 Zulu
1171 Faroese 1334 Latvian; 1503 Singhalese
1174 French Lettish 1505 Slovak
1181 Frisian 1345 Malagasy 1506 Slovenian 1703 Not specified
Parental Control/Area Code List

Code Area Code Area Code Area Code Area
2044 Argentina 2165 Finland 2362 Mexico 2149 Spain
2047 Australia 2174 France 2376 Netherlands 2499 Sweden
2046 Austria 2109 Germany 2390 New Zealand 2086 Switzerland
2057 Belgium 2248 India 2379 Norway 2528 Thailand
2070 Brazil 2238 Indonesia 2427 Pakistan 2184 United
2079 Canada 2254 Italy 2424 Philippines Kingdom
2090 Chile 2276 Japan 2436 Portugal
2092 China 2304 Korea 2489 Russia
2115 Denmark 2363 Malaysia 2501 Singapore
139US

[4-109-708-14(1)]
specdef v20070110
password or any other breach of security related to the Service, Site,

and/or Software.
Terms and Conditions of Sony’s Privacy Policy is posted on the Site and at
http://products.sel.sony.com/SEL/legal/privacy.html, the
Use and End User terms of which are incorporated herein, and applies to your use of the
Account, Product, Service, Site, and Software.
License Agreement 4. Automatic Update

The Software contains a functionality by which it is updated
automatically when the Product is connected to a server belonging to
Sony or to a third party designated by Sony. When you specify your
The Sony Blu-ray Disc player (“Product”) and associated software
intention not to use this automatic update functionality, or when the
(“Software”) are provided and maintained by Sony Electronics Inc.
and its affiliates (“Sony”). Sony also provides and maintains setting asking whether you wish to update automatically is activated
and you decline to execute updates, it is assumed that you agree that
associated service (the “Service”), including any subsite accessible
the security functionality improvements, error corrections, other
through the Service’s Internet homepage (the “Site”). The Software
functional updates or any other changes offered by Sony through
includes software embedded in the Product; stored on any media,
such updates would not be made to the Software and that your
bundled with the Product or otherwise provided by Sony;
current and further use of the Software may be affected thereby.
downloaded from the Site or otherwise made accessible or provided
by Sony; any such media and any printed or “on-line” or electronic When the automatic update functionality described in the previous
documentation associated with the Product and all updates and paragraph is activated, it is assumed that you agree (a) that the
upgrades thereto. Software will be automatically updated as necessary to improve
WHEN YOU ACCESS, BROWSE, OR USE THE SERVICE, security functionality, to correct errors, to improve update
functionality, or for other purposes, and (b) that this updating of the
PRODUCT, SOFTWARE, AND/OR SITE, YOU ACCEPT,
Software may be accompanied by the augmenting, modifying, or
WITHOUT LIMITATION OR QUALIFICATION, THE TERMS
AND CONDITIONS SET FORTH HEREIN, SONY’S PRIVACY removing of functionality of the Software.
POLICY POSTED ON THE SITE, AND ANY ADDITIONAL 5. Additional Terms Governing Product Software
TERMS AND CONDITIONS OF USE SET FORTH IN ANY You may use the Software solely in conjunction with the Product that
PORTION OF THE SERVICE AND SITE (COLLECTIVELY THE accompanied the Software. The Software is licensed, not sold. In
“AGREEMENT”). IF YOU DO NOT AGREE WITH THE TERMS addition to the terms set forth in other portions of this Agreement, the
AND CONDITIONS OF THIS AGREEMENT, SONY DOES NOT Software is subject to the following:
GRANT THE LIMITED RIGHTS HEREIN, AND PLEASE DO Use of Software. You may use the Software in conjunction with the
NOT USE THE SERVICE, PRODUCT, SOFTWARE, AND/OR Product for personal use.
SITE. Limitation on Reverse Engineering, Decompilation and
1. Ownership Disassembly. You may not modify, reverse engineer, decompile, or
The Software and all materials on the Service and/or Site, including disassemble the Software in whole or in part.
but not limited to images, software and text (the “Content”) are Separation of Components.The Software is licensed as a single
protected by copyright under U.S. copyright law, international product. Its component parts may not be separated for use on more
conventions, and other copyright laws. You cannot use the Software, than one device unless expressly authorized by Sony.
Service, Product, Content, and Site except as specified herein. There Data Files. The Software may create data files automatically for use
may be proprietary logos, service marks, and trademarks found on with the Software. Any such data files will be deemed as part of the
this Service or Site. By making them available on the Service and/or Software.
Site, Sony is not granting you any license to utilize those proprietary Rental. You may not rent or lease the Software.
logos, service marks, or trademarks. Any unauthorized use of the Software Transfer. You may permanently transfer all of your rights
Service, Site, Content or Software may violate copyright laws, under this Agreement only as part of a sale or transfer of Software
trademark laws, the laws of privacy and publicity, and civil and accompanying the sale or transfer of your Product, provided you
criminal statutes. All title and copyright in and to the Software or retain no copies, transfer all of the Software (including all copies,
materials on the Service/Site and any copies of the Software, are component parts, the media and printed materials, all versions and
owned by Sony, its licensors, or suppliers. All rights not specifically any upgrades of the Software and this Agreement), and the recipient
granted under this Agreement are reserved by Sony, its licensors, and agrees to the terms of this Agreement.
suppliers. Dependent Software. The software, network services or other
2. Your Rights & Limited License products other than Software upon which the Software’s
The Service, Site, Software, Content, and Product are only for your performance depends on might be interrupted or discontinued at the
personal use. You are responsible for all your activities hereunder, discretion of the suppliers (software suppliers, service providers or
including all legal liability incurred from your use of the Service or Sony).
others who use the Service via your Product or Account (as defined High Risk Activities. The Software is not fault-tolerant and is not
designed, manufactured or intended for use or resale as on-line
below). You may use the Service, Site, Software, Content and
control equipment in hazardous environments requiring fail-safe
Product for lawful purposes only. You may not distribute, exchange,
performance, such as in the operation of nuclear facilities, aircraft
modify, sell, or transmit anything you may copy from the Service or
navigation or communication systems, air traffic control, direct life
Site, including but not limited to any text, images, audio, and video,
support machines, or weapons systems, in which the failure of the
for any business, commercial, or public purpose. As long as you
Software could lead to death, personal injury, or severe physical or
comply with the terms of this Agreement, Sony grants you a non-
environmental damage (“High Risk Activities”). Sony and its
exclusive, non-transferable, limited right to enter, display, and use
suppliers specifically disclaim any express or implied warranty of
the Service, Site, and Software as set forth in this Agreement. You
fitness for High Risk Activities.
agree not to interrupt/disrupt or attempt to interrupt/disrupt the
U.S. Government Restricted Rights. The Software is provided with
operation of this Service, Site or Software in any way.
RESTRICTED RIGHTS. Use, duplication, or disclosure by the
3. User Account & Privacy United States Government is subject to restriction as set forth in
As part of your usage of the Product, Service, Site, and/or Software, subparagraph (c) (1) and (2) of the Commercial Computer Software-
Sony may require that you establish a user account (“Account”) for Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer
which you must provide Sony true, accurate, current, and complete is Sony Electronics Inc., 16530 Via Esprillo, San Diego, CA 92127.
information about yourself and maintain/promptly update such
information. You are responsible for maintaining the confidentiality
of any and all of your passwords associated with the Account. You
agree to notify Sony immediately of any unauthorized use of your
140US

[4-109-708-14(1)]
specdef v20070110
GNU General Public, Lesser General Public, & Other Licenses. 9. Indemnification
Notwithstanding terms in this Agreement, certain portions of the You agree to indemnify, defend, and hold Sony and all of its agents,
Software are governed by the GNU Lesser General Public License, directors, employees, information providers, licensors and licensees,
Version 2.1 (LGPL), GNU General Public License Version 2 (GPL), affiliates, content providers, officers, and parent (collectively,
and other open source code licenses (“Open Source Licenses”), “Indemnified Parties”), harmless from and against any and all
copies of which are attached hereto and incorporated herein. For liability and costs (including, without limitation, attorneys’ fees and
such portions of the Software, to the extent there is any conflict costs), incurred by the Indemnified Parties in connection with any
between this Agreement and the Open Source Licenses, the Open claim arising out of (i) any breach or alleged breach by you of this
Source Licenses shall govern as applicable. Agreement in any manner, (ii) any information you submit to Sony
Certain Source Code Availability. Sony is making available the hereunder, (iii) any breach or alleged breach by you of a third party’s
source code of certain portions of the SOFTWARE per the GPL/ rights or (iv) any damage caused by or alleged to have been caused
LGPL LICENSES. Please see http://www.sony.com/linux for by you to the Service. You will cooperate as fully as reasonably
access to and instructions on obtaining such source code. required in Indemnified Party(s) defense of any claim. Sony and/or
6. Changes to Service Indemnified Parties reserve the right, at its own expense, to assume
Sony reserves the right to discontinue one, some, or all of the the exclusive defense and control of any matter otherwise subject to
features of the Service you receive at any time at its discretion. Sony indemnification by you and you shall not in any event settle any
may, at its discretion and from time to time change, add or remove matter without the written consent of Sony and/or Indemnified
features and functionality, upgrade or modify the Service, Site and/ Parties.
or Software without notice. You may, at Sony’s discretion, receive 10. DISCLAIMER OF WARRANTIES AND DAMAGES;
messages regarding these changes and new features/functionality. LIMITATION OF LIABILITY
Any new text, content, file, data, product, services, information, YOU UNDERSTAND THAT USAGE OF THE PRODUCT AND
software, software tool or other feature provided by Sony (through SERVICE REQUIRES INTERNET SERVICE PROVIDED BY
the network or by CD-ROM or other means) (including, but not YOU, FOR WHICH YOU ARE SOLELY RESPONSIBLE.
limited to, any update to Software provided to you automatically OPERATION OF THE PRODUCT AND/OR SERVICE MAY BE
pursuant to Section 4 of this Agreement) will be subject to this LIMITED OR RESTRICTED DEPENDING UPON THE
Agreement; provided that, if separate terms and conditions CAPABILITIES OR TECHNICAL LIMITATIONS OF YOUR
applicable to such feature are provided to you, such terms and INTERNET SERVICE.
conditions shall apply to such feature in priority to this Agreement.
YOUR USE OF THE SOFTWARE, SERVICE, PRODUCT,
7. Confidentiality CONTENT AND/OR SITE IS AT YOUR OWN RISK. THE
You shall maintain the confidentiality of any information with SOFTWARE, SERVICE, CONTENT AND SITE ARE PROVIDED
regard to the Product and Documentation that is provided under this “AS IS” AND, TO THE FULLEST EXTENT PERMISSIBLE BY
Agreement and is not publicly known. You agree not to disclose LAW, SONY MAKES NO REPRESENTATIONS OR
such information to any third party without the prior written consent. WARRANTIES OF ANY KIND WHATSOEVER (1) FOR THE
8. Sony’s Right to Terminate or Modify Terms or ACCURACY, MERCHANTABILITY, FITNESS FOR A
Conditions of this Agreement PARTICULAR PURPOSE, OR NON-INFRINGEMENT
Sony may add to, change, or remove any part, term, or condition of ASSOCIATED WITH THE SERVICE, SITE, AND/OR
this Agreement at any time, without prior notice. Any changes to this SOFTWARE; (2) THAT THE SERVER(S) THAT MAKES THE
Agreement or any terms posted on the Service and/or Site apply as SERVICE, SOFTWARE, AND/OR SITE AVAILABLE ARE
soon as they are posted. By continuing to use the Service, Product, FREE OF VIRUSES OR OTHER COMPONENTS THAT MAY
Software and/or Site after any changes are posted, you are indicating INFECT, HARM, OR CAUSE DAMAGE TO YOUR
your acceptance of those changes. SONY MAY ADD, CHANGE, COMPUTER, TELEVISION, OTHER EQUIPMENT, OR ANY
DISCONTINUE, REMOVE, OR SUSPEND ANY OTHER OTHER PROPERTY. FURTHERMORE, SONY DOES NOT
CONTENT POSTED ON THE SERVICE AND/OR SITE, WARRANT OR MAKE ANY REPRESENTATIONS
INCLUDING FEATURES AND SPECIFICATIONS OF REGARDING THE USE OR THE RESULTS OF THE USE OF
PRODUCTS DESCRIBED OR DEPICTED ON THE SERVICE THE SOFTWARE, SERVICE, AND/OR SITE IN TERMS OF ITS
AND/OR SITE, TEMPORARILY OR PERMANENTLY, AT ANY CORRECTNESS, ACCURACY, RELIABILITY, OR
TIME, WITHOUT NOTICE AND WITHOUT LIABILITY. OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR
WITHOUT PREJUDICE TO ANY OTHER RIGHTS, SONY MAY ADVICE GIVEN BY SONY OR A SONY AUTHORIZED
SUSPEND OR TERMINATE THIS AGREEMENT REPRESENTATIVE SHALL CREATE A WARRANTY OR IN
IMMEDIATELY UPON NOTICE IF YOU FAIL TO COMPLY ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
WITH THE TERMS AND CONDITIONS OF THIS SHOULD THE SOFTWARE, SERVICE, AND/OR SITE PROVE
AGREEMENT. Upon termination, you shall destroy the Software DEFECTIVE YOU (AND NOT SONY OR A SONY
within fourteen (14) days after the date of such termination, and upon AUTHORIZED REPRESENTATIVE) ASSUME THE ENTIRE
Sony’s request, provide Sony with the certification of such COST OF ALL NECESSARY SERVICING, REPAIR OR
destruction. Sony may take any legal and technical remedies to CORRECTION.
prevent the violation of and/or to enforce this Agreement, including UNDER NO CIRCUMSTANCES, INCLUDING BUT NOT
without limitation, immediate termination of your access to the LIMITED TO SONY’S NEGLIGENCE OR ISSUES RELATED
Service if we believe in our discretion you are violating this TO THIRD PARTY CONTENT PROVIDERS, SHALL SONY BE
Agreement. LIABLE FOR ANY CONSEQUENTIAL, DIRECT,
INCIDENTAL, INDIRECT, PUNITIVE, OR SPECIAL
DAMAGES RELATED TO (A) THE USE OF, (B) THE
INABILITY TO USE, OR (C) ERRORS OR OMISSIONS IN THE
SOFTWARE, SERVICE, PRODUCT, AND/OR SITE, EVEN IF
SONY OR AN AUTHORIZED REPRESENTATIVE THEREOF
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR
INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT
SHALL SONY’S TOTAL LIABILITY TO YOU FOR ALL
DAMAGES, LOSSES, AND CAUSES OF ACTION (WHETHER
IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED
TO, NEGLIGENCE OR OTHERWISE) EXCEED $100.00.
141US

[4-109-708-14(1)]
specdef v20070110
11. General Provisions

This Agreement, the limited warranty accompanying the Product,
plus any additional terms posted on the Service or Site, together
constitute the entire agreement between Sony and you with respect
Software License
to your use of the Product, Service, Site, Content, and Software. Any
notice by Sony hereunder may be made by letter, email, or posting Information
on the Service or Site. Any cause of action you may have with
respect to your use of this Site must be commenced within one (1)
year after the claim or cause of action arises. If for any reason a court Required public statement & License for
of competent jurisdiction finds any provision of this Agreement, or GPL/LGPL licensed software used in this
portion thereof, to be unenforceable, that provision shall be enforced
to the maximum extent permissible so as to affect the intent of this product
Agreement, and the remaining terms and conditions of the This product contains software that is subject to the following GNU
Agreement shall continue in full force and effect. This Agreement General Public License (“GPL”) or GNU Lesser General Public
shall be governed by and construed in accordance with the laws of License (“LGPL”). These establish that customers have the right to
the State of Delaware, United States of America, without reference acquire, modify, and redistribute the source code of said software in
to its conflicts of law rules. You agree to submit to the personal and accordance with the terms of the GPL or the LGPL.
exclusive jurisdiction of federal or state courts in Delaware. Package List
linux-kernel.tar.gz
pump
lrzsz
busybox
gcc
glibc
netbase
dosfstools
lzo
mkcramfs
hostname
scfs
The source code for the above-listed software is available on the
Web.
To download, please access the following URL:
http://www.sony.net/Products/Linux
Please note that Sony cannot answer or respond to any inquiries
regarding the content of this source code.
GNU GENERAL PUBLIC LICENSE

Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
Preamble
The Licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation’s software and to any other program whose authors
commit to using it. (Some other Free Software Foundation software
is covered by the GNU Lesser General Public License instead.) You
can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code or
can get it if you want it, that you can change the software or use
pieces of it in new free programs; and that you know you can do these
things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that you
have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know
their rights.
142US

[4-109-708-14(1)]
specdef v20070110
We protect your rights with two steps: (1) copyright the software, These requirements apply to the modified work as a whole. If
and (2) offer you this license which gives you legal permission to identifiable sections of that work are not derived from the Program,
copy, distribute and/or modify the software. and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
Also, for each author’s protection and ours, we want to make certain
sections when you distribute them as separate works. But when you
that everyone understands that there is no warranty for this free
distribute the same sections as part of a whole which is a work based
software. If the software is modified by someone else and passed on,
on the Program, the distribution of the whole must be on the terms of
we want its recipients to know that what they have is not the original,
this License, whose permissions for other licensees extend to the
so that any problems introduced by others will not reflect on the
entire whole, and thus to each and every part regardless of who wrote
original authors’ reputations.
it.
Finally, any free program is threatened constantly by software
Thus, it is not the intent of this section to claim rights or contest your
patents. We wish to avoid the danger that redistributors of a free
rights to work written entirely by you; rather, the intent is to exercise
program will individually obtain patent licenses, in effect making the
the right to control the distribution of derivative or collective works
program proprietary. To prevent this, we have made it clear that any
based on the Program.
patent must be licensed for everyone’s free use or not licensed at all.
In addition, mere aggregation of another work not based on the
The precise terms and conditions for copying, distribution and
Program with the Program (or with a work based on the Program) on
modification follow.
a volume of a storage or distribution medium does not bring the other
GNU GENERAL PUBLIC LICENSE TERMS AND work under the scope of this License.
CONDITIONS FOR COPYING, DISTRIBUTION AND 3. You may copy and distribute the Program (or a work based on it,
MODIFICATION under Section 2) in object code or executable form under the
0. This License applies to any program or other work which terms of Sections 1 and 2 above provided that you also do one of
contains a notice placed by the copyright holder saying it may be the following:
distributed under the terms of this General Public License. The
“Program”, below, refers to any such program or work, and a a) Accompany it with the complete corresponding machine-
“work based on the Program” means either the Program or any readable source code, which must be distributed under the
derivative work under copyright law: that is to say, a work terms of Sections 1 and 2 above on a medium customarily
containing the Program or a portion of it, either verbatim or with used for software interchange; or,
modifications and/or translated into another language. b) Accompany it with a written offer, valid for at least three
(Hereinafter, translation is included without limitation in the term years, to give any third party, for a charge no more than your
“modification”.) Each licensee is addressed as “you”. cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to
Activities other than copying, distribution and modification are not be distributed under the terms of Sections 1 and 2 above on a
covered by this License; they are outside its scope. The act of medium customarily used for software interchange; or,
running the Program is not restricted, and the output from the c) Accompany it with the information you received as to the
Program is covered only if its contents constitute a work based on the offer to distribute corresponding source code. (This
Program (independent of having been made by running the alternative is allowed only for noncommercial distribution
Program). Whether that is true depends on what the Program does. and only if you received the program in object code or
1. You may copy and distribute verbatim copies of the Program’s executable form with such an offer, in accord with Subsection
source code as you receive it, in any medium, provided that you b above.)
conspicuously and appropriately publish on each copy an The source code for a work means the preferred form of the work for
appropriate copyright notice and disclaimer of warranty; keep making modifications to it. For an executable work, complete source
intact all the notices that refer to this License and to the absence code means all the source code for all modules it contains, plus any
of any warranty; and give any other recipients of the Program a associated interface definition files, plus the scripts used to control
copy of this License along with the Program. compilation and installation of the executable. However, as a special
You may charge a fee for the physical act of transferring a copy, and exception, the source code distributed need not include anything that
you may at your option offer warranty protection in exchange for a is normally distributed (in either source or binary form) with the
fee. major components (compiler, kernel, and so on) of the operating
system on which the executable runs, unless that component itself
2. You may modify your copy or copies of the Program or any accompanies the executable.
portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of If distribution of executable or object code is made by offering
Section 1 above, provided that you also meet all of these access to copy from a designated place, then offering equivalent
conditions: access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
a) You must cause the modified files to carry prominent notices compelled to copy the source along with the object code.
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that 4. You may not copy, modify, sublicense, or distribute the Program
in whole or in part contains or is derived from the Program or except as expressly provided under this License. Any attempt
any part thereof, to be licensed as a whole at no charge to all otherwise to copy, modify, sublicense or distribute the Program
third parties under the terms of this License. is void, and will automatically terminate your rights under this
c) If the modified program normally reads commands License. However, parties who have received copies, or rights,
interactively when run, you must cause it, when started from you under this License will not have their licenses
running for such interactive use in the most ordinary way, to terminated so long as such parties remain in full compliance.
print or display an announcement including an appropriate 5. You are not required to accept this License, since you have not
copyright notice and a notice that there is no warranty (or signed it. However, nothing else grants you permission to modify
else, saying that you provide a warranty) and that users may or distribute the Program or its derivative works. These actions
redistribute the program under these conditions, and telling are prohibited by law if you do not accept this License.
the user how to view a copy of this License. (Exception: if the Therefore, by modifying or distributing the Program (or any
Program itself is interactive but does not normally print such work based on the Program), you indicate your acceptance of this
an announcement, your work based on the Program is not License to do so, and all its terms and conditions for copying,
required to print an announcement.) distributing or modifying the Program or works based on it.
143US

[4-109-708-14(1)]
specdef v20070110
6. Each time you redistribute the Program (or any work based on the NO WARRANTY
Program), the recipient automatically receives a license from the
11. BECAUSE THE PROGRAM IS LICENSED FREE OF
original licensor to copy, distribute or modify the Program
CHARGE, THERE IS NO WARRANTY FOR THE
subject to these terms and conditions. You may not impose any
PROGRAM, TO THE EXTENT PERMITTED BY
further restrictions on the recipients’ exercise of the rights
APPLICABLE LAW. EXCEPT WHEN OTHERWISE
granted herein. You are not responsible for enforcing compliance
STATED IN WRITING THE COPYRIGHT HOLDERS AND/
by third parties to this License.
OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS”
7. If, as a consequence of a court judgment or allegation of patent WITHOUT WARRANTY OF ANY KIND, EITHER
infringement or for any other reason (not limited to patent EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
issues), conditions are imposed on you (whether by court order, LIMITED TO, THE IMPLIED WARRANTIES OF
agreement or otherwise) that contradict the conditions of this MERCHANTABILITY AND FITNESS FOR A PARTICULAR
License, they do not excuse you from the conditions of this PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
License. If you cannot distribute so as to satisfy simultaneously PERFORMANCE OF THE PROGRAM IS WITH YOU.
your obligations under this License and any other pertinent SHOULD THE PROGRAM PROVE DEFECTIVE, YOU
obligations, then as a consequence you may not distribute the ASSUME THE COST OF ALL NECESSARY SERVICING,
Program at all. For example, if a patent license would not permit REPAIR OR CORRECTION.
royalty-free redistribution of the Program by all those who
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
receive copies directly or indirectly through you, then the only
OR AGREED TO IN WRITING WILL ANY COPYRIGHT
way you could satisfy both it and this License would be to refrain
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
entirely from distribution of the Program.
AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
If any portion of this section is held invalid or unenforceable under ABOVE, BE LIABLE TO YOU FOR DAMAGES,
any particular circumstance, the balance of the section is intended to INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
apply and the section as a whole is intended to apply in other CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
circumstances. OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
It is not the purpose of this section to induce you to infringe any NOT LIMITED TO LOSS OF DATA OR DATA BEING
patents or other property right claims or to contest validity of any RENDERED INACCURATE OR LOSSES SUSTAINED BY
such claims; this section has the sole purpose of protecting the YOU OR THIRD PARTIES OR A FAILURE OF THE
integrity of the free software distribution system, which is PROGRAM TO OPERATE WITH ANY OTHER
implemented by public license practices. Many people have made PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
generous contributions to the wide range of software distributed HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
through that system in reliance on consistent application of that DAMAGES.
system; it is up to the author/donor to decide if he or she is willing to
distribute software through any other system and a licensee cannot END OF TERMS AND CONDITIONS
impose that choice.
How to Apply These Terms to Your New Programs
This section is intended to make thoroughly clear what is believed to If you develop a new program, and you want it to be of the greatest
be a consequence of the rest of this License. possible use to the public, the best way to achieve this is to make it
8. If the distribution and/or use of the Program is restricted in free software which everyone can redistribute and change under
certain countries either by patents or by copyrighted interfaces, these terms.
the original copyright holder who places the Program under this To do so, attach the following notices to the program. It is safest to
License may add an explicit geographical distribution limitation attach them to the start of each source file to most effectively convey
excluding those countries, so that distribution is permitted only in the exclusion of warranty; and each file should have at least the
or among countries not thus excluded. In such case, this License “copyright” line and a pointer to where the full notice is found.
incorporates the limitation as if written in the body of this
License. <one line to give the program’s name and an idea of what it does.>
Copyright (C) <year> <name of author>
9. The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such This program is free software; you can redistribute it and/or modify
new versions will be similar in spirit to the present version, but it under the terms of the GNU General Public License as published
may differ in detail to address new problems or concerns. by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies to This program is distributed in the hope that it will be useful, but
it and “any later version”, you have the option of following the terms WITHOUT ANY WARRANTY; without even the implied warranty
and conditions either of that version or of any later version published of MERCHANTABILITY or FITNESS FOR A PARTICULAR
by the Free Software Foundation. If the Program does not specify a PURPOSE. See the GNU General Public License for more details.
version number of this License, you may choose any version ever You should have received a copy of the GNU General Public License
published by the Free Software Foundation. along with this program; if not, write to the Free Software
10. If you wish to incorporate parts of the Program into other free Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-
programs whose distribution conditions are different, write to the 1307, USA.
author to ask for permission. For software which is copyrighted Also add information on how to contact you by electronic and paper
by the Free Software Foundation, write to the Free Software mail.
Foundation; we sometimes make exceptions for this. Our
If the program is interactive, make it output a short notice like this
decision will be guided by the two goals of preserving the free
when it starts in an interactive mode:
status of all derivatives of our free software and of promoting the
sharing and reuse of software generally. Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for
details type ‘show w’. This is free software, and you are welcome to
redistribute it under certain conditions; type ‘show c’ for details.
144US

[4-109-708-14(1)]
specdef v20070110
The hypothetical commands ‘show w’ and ‘show c’ should show the We protect your rights with a two-step method: (1) we copyright the
appropriate parts of the General Public License. Of course, the library, and (2) we offer you this license, which gives you legal
commands you use may be called something other than ‘show w’ and permission to copy, distribute and/or modify the library.
‘show c’; they could even be mouse-clicks or menu items--whatever To protect each distributor, we want to make it very clear that there
suits your program. is no warranty for the free library. Also, if the library is modified by
You should also get your employer (if you work as a programmer) or someone else and passed on, the recipients should know that what
your school, if any, to sign a “copyright disclaimer” for the program, they have is not the original version, so that the original author’s
if necessary. Here is a sample; alter the names: reputation will not be affected by problems that might be introduced
by others.
Yoyodyne, Inc., hereby disclaims all copyright interest in the
program ‘Gnomovision’ (which makes passes at compilers) written Finally, software patents pose a constant threat to the existence of
by James Hacker. any free program. We wish to make sure that a company cannot
effectively restrict the users of a free program by obtaining a
<signature of Ty Coon>, 1 April 1989 restrictive license from a patent holder. Therefore, we insist that any
Ty Coon, President of Vice patent license obtained for a version of the library must be consistent
This General Public License does not permit incorporating your with the full freedom of use specified in this license.
program into proprietary programs. If your program is a subroutine Most GNU software, including some libraries, is covered by the
library, you may consider it more useful to permit linking proprietary ordinary GNU General Public License. This license, the GNU Lesser
applications with the library. If this is what you want to do, use the General Public License, applies to certain designated libraries, and is
GNU Lesser General Public License instead of this License. quite different from the ordinary General Public License. We use this
license for certain libraries in order to permit linking those libraries
GNU LESSER GENERAL PUBLIC LICENSE into non-free programs.
Version 2.1, February 1999 When a program is linked with a library, whether statically or using
Copyright (C) 1991, 1999 Free Software Foundation, Inc. a shared library, the combination of the two is legally speaking a
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA combined work, a derivative of the original library. The ordinary
Everyone is permitted to copy and distribute verbatim copies of this General Public License therefore permits such linking only if the
license document, but changing it is not allowed. entire combination fits its criteria of freedom. The Lesser General
[This is the first released version of the Lesser GPL. It also counts Public License permits more lax criteria for linking other code with
as the successor of the GNU Library Public License, version 2, hence the library.
the version number 2.1.] We call this license the “Lesser” General Public License because it
Preamble does Less to protect the user’s freedom than the ordinary General
The licenses for most software are designed to take away your Public License. It also provides other free software developers Less
freedom to share and change it. By contrast, the GNU General Public of an advantage over competing non-free programs. These
Licenses are intended to guarantee your freedom to share and change disadvantages are the reason we use the ordinary General Public
free software--to make sure the software is free for all its users. License for many libraries. However, the Lesser license provides
advantages in certain special circumstances.
This license, the Lesser General Public License, applies to some
specially designated software packages--typically libraries--of the For example, on rare occasions, there may be a special need to
Free Software Foundation and other authors who decide to use it. encourage the widest possible use of a certain library, so that it
You can use it too, but we suggest you first think carefully about becomes a de-facto standard. To achieve this, non-free programs
whether this license or the ordinary General Public License is the must be allowed to use the library. A more frequent case is that a free
better strategy to use in any particular case, based on the library does the same job as widely used non-free libraries. In this
explanations below. case, there is little to gain by limiting the free library to free software
only, so we use the Lesser General Public License.
When we speak of free software, we are referring to freedom of use,
not price. Our General Public Licenses are designed to make sure In other cases, permission to use a particular library in non-free
that you have the freedom to distribute copies of free software (and programs enables a greater number of people to use a large body of
charge for this service if you wish); that you receive source code or free software. For example, permission to use the GNU C Library in
can get it if you want it; that you can change the software and use non-free programs enables many more people to use the whole GNU
pieces of it in new free programs; and that you are informed that you operating system, as well as its variant, the GNU/Linux operating
can do these things. system.
To protect your rights, we need to make restrictions that forbid Although the Lesser General Public License is Less protective of the
users’ freedom, it does ensure that the user of a program that is linked
distributors to deny you these rights or to ask you to surrender these
rights. These restrictions translate to certain responsibilities for you with the Library has the freedom and the wherewithal to run that
if you distribute copies of the library or if you modify it. program using a modified version of the Library.
The precise terms and conditions for copying, distribution and
For example, if you distribute copies of the library, whether gratis or
for a fee, you must give the recipients all the rights that we gave you. modification follow. Pay close attention to the difference between a
You must make sure that they, too, receive or can get the source “work based on the library” and a “work that uses the library”. The
former contains code derived from the library, whereas the latter
code. If you link other code with the library, you must provide
must be combined with the library in order to run.
complete object files to the recipients, so that they can relink them
with the library after making changes to the library and recompiling GNU GENERAL PUBLIC LICENSE TERMS AND
it. And you must show them these terms so they know their rights. CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License Agreement applies to any software library or other
program which contains a notice placed by the copyright holder
or other authorized party saying it may be distributed under the
terms of this Lesser General Public License (also called “this
License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data
prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work
which has been distributed under these terms. A “work based on the
Library” means either the Library or any derivative work under
145US

[4-109-708-14(1)]
specdef v20070110
copyright law: that is to say, a work containing the Library or a In addition, mere aggregation of another work not based on the
portion of it, either verbatim or with modifications and/or translated Library with the Library (or with a work based on the Library) on a
straightforwardly into another language. (Hereinafter, translation is volume of a storage or distribution medium does not bring the other
included without limitation in the term “modification”.) work under the scope of this License.
“Source code” for a work means the preferred form of the work for 3. You may opt to apply the terms of the ordinary GNU General
making modifications to it. For a library, complete source code Public License instead of this License to a given copy of the
means all the source code for all modules it contains, plus any Library. To do this, you must alter all the notices that refer to this
associated interface definition files, plus the scripts used to control License, so that they refer to the ordinary GNU General Public
compilation and installation of the library. License, version 2, instead of to this License. (If a newer version
than version 2 of the ordinary GNU General Public License has
Activities other than copying, distribution and modification are not
appeared, then you can specify that version instead if you wish.)
covered by this License; they are outside its scope. The act of
Do not make any other change in these notices.
running a program using the Library is not restricted, and output
from such a program is covered only if its contents constitute a work Once this change is made in a given copy, it is irreversible for that
based on the Library (independent of the use of the Library in a tool copy, so the ordinary GNU General Public License applies to all
for writing it). Whether that is true depends on what the Library does subsequent copies and derivative works made from that copy.
and what the program that uses the Library does. This option is useful when you wish to copy part of the code of the
1. You may copy and distribute verbatim copies of the Library’s Library into a program that is not a library.
complete source code as you receive it, in any medium, provided 4. You may copy and distribute the Library (or a portion or
that you conspicuously and appropriately publish on each copy derivative of it, under Section 2) in object code or executable
an appropriate copyright notice and disclaimer of warranty; keep form under the terms of Sections 1 and 2 above provided that you
intact all the notices that refer to this License and to the absence accompany it with the complete corresponding machine-readable
of any warranty; and distribute a copy of this License along with source code, which must be distributed under the terms of
the Library. Sections 1 and 2 above on a medium customarily used for
You may charge a fee for the physical act of transferring a copy, and software interchange.
you may at your option offer warranty protection in exchange for a If distribution of object code is made by offering access to copy from
fee. a designated place, then offering equivalent access to copy the source
2. You may modify your copy or copies of the Library or any code from the same place satisfies the requirement to distribute the
portion of it, thus forming a work based on the Library, and copy source code, even though third parties are not compelled to copy the
and distribute such modifications or work under the terms of source along with the object code.
Section 1 above, provided that you also meet all of these 5. A program that contains no derivative of any portion of the
conditions: Library, but is designed to work with the Library by being
a) The modified work must itself be a software library. compiled or linked with it, is called a “work that uses the
b) You must cause the files modified to carry prominent notices Library”. Such a work, in isolation, is not a derivative work of the
stating that you changed the files and the date of any change. Library, and therefore falls outside the scope of this License.
c) You must cause the whole of the work to be licensed at no However, linking a “work that uses the Library” with the Library
charge to all third parties under the terms of this License. creates an executable that is a derivative of the Library (because it
d) If a facility in the modified Library refers to a function or a contains portions of the Library), rather than a “work that uses the
table of data to be supplied by an application program that library”. The executable is therefore covered by this License. Section
uses the facility, other than as an argument passed when the 6 states terms for distribution of such executables.
facility is invoked, then you must make a good faith effort to
ensure that, in the event an application does not supply such When a “work that uses the Library” uses material from a header file
function or table, the facility still operates, and performs that is part of the Library, the object code for the work may be a
whatever part of its purpose remains meaningful. derivative work of the Library even though the source code is not.
(For example, a function in a library to compute square roots has Whether this is true is especially significant if the work can be linked
a purpose that is entirely well-defined independent of the without the Library, or if the work is itself a library. The threshold
application. Therefore, Subsection 2d requires that any for this to be true is not precisely defined by law.
application-supplied function or table used by this function must If such an object file uses only numerical parameters, data structure
be optional: if the application does not supply it, the square root layouts and assessors, and small macros and small inline functions
function must still compute square roots.) (ten lines or less in length), then the use of the object file is
These requirements apply to the modified work as a whole. If unrestricted, regardless of whether it is legally a derivative work.
identifiable sections of that work are not derived from the (Executables containing this object code plus portions of the Library
Library, and can be reasonably considered independent and will still fall under Section 6.)
separate works in themselves, then this License, and its terms, do Otherwise, if the work is a derivative of the Library, you may
not apply to those sections when you distribute them as separate distribute the object code for the work under the terms of Section 6.
works. But when you distribute the same sections as part of a Any executables containing that work also fall under Section 6,
whole which is a work based on the Library, the distribution of whether or not they are linked directly with the Library itself.
the whole must be on the terms of this License, whose
permissions for other licensees extend to the entire whole, and 6. As an exception to the Sections above, you may also combine or
thus to each and every part regardless of who wrote it. link a “work that uses the Library” with the Library to produce a
work containing portions of the Library, and distribute that work
Thus, it is not the intent of this section to claim rights or contest your under terms of your choice, provided that the terms permit
rights to work written entirely by you; rather, the intent is to exercise modification of the work for the customer’s own use and reverse
the right to control the distribution of derivative or collective works engineering for debugging such modifications.
based on the Library.
146US

[4-109-708-14(1)]
specdef v20070110
You must give prominent notice with each copy of the work that the or distribute the Library or its derivative works. These actions are
Library is used in it and that the Library and its use are covered by prohibited by law if you do not accept this License. Therefore, by
this License. You must supply a copy of this License. If the work modifying or distributing the Library (or any work based on the
during execution displays copyright notices, you must include the Library), you indicate your acceptance of this License to do so,
copyright notice for the Library among them, as well as a reference and all its terms and conditions for copying, distributing or
directing the user to the copy of this License. Also, you must do one modifying the Library or works based on it.
of these things:
10. Each time you redistribute the Library (or any work based on the
a) Accompany the work with the complete corresponding Library), the recipient automatically receives a license from the
machine-readable source code for the Library including original licensor to copy, distribute, link with or modify the
whatever changes were used in the work (which must be Library subject to these terms and conditions. You may not
distributed under Sections 1 and 2 above); and, if the work is impose any further restrictions on the recipients’ exercise of the
an executable linked with the Library, with the complete rights granted herein. You are not responsible for enforcing
machine-readable “work that uses the Library”, as object compliance by third parties with this License.
code and/or source code, so that the user can modify the
11. If, as a consequence of a court judgment or allegation of patent
Library and then relink to produce a modified executable
infringement or for any other reason (not limited to patent
containing the modified Library. (It is understood that the
issues), conditions are imposed on you (whether by court order,
user who changes the contents of definitions files in the
agreement or otherwise) that contradict the conditions of this
Library will not necessarily be able to recompile the
License, they do not excuse you from the conditions of this
application to use the modified definitions.)
License. If you cannot distribute so as to satisfy simultaneously
b) Use a suitable shared library mechanism for linking with the
your obligations under this License and any other pertinent
Library. A suitable mechanism is one that (1) uses at run time
obligations, then as a consequence you may not distribute the
a copy of the library already present on the user’s computer
Library at all. For example, if a patent license would not permit
system, rather than copying library functions into the
royalty-free redistribution of the Library by all those who receive
executable, and (2) will operate properly with a modified
copies directly or indirectly through you, then the only way you
version of the library, if the user installs one, as long as the
could satisfy both it and this License would be to refrain entirely
modified version is interface-compatible with the version that
from distribution of the Library.
the work was made with.
c) Accompany the work with a written offer, valid for at least If any portion of this section is held invalid or unenforceable under
three years, to give the same user the materials specified in any particular circumstance, the balance of the section is intended to
Subsection 6a, above, for a charge no more than the cost of apply, and the section as a whole is intended to apply in other
performing this distribution. circumstances.
d) If distribution of the work is made by offering access to copy It is not the purpose of this section to induce you to infringe any
from a designated place, offer equivalent access to copy the patents or other property right claims or to contest validity of any
above specified materials from the same place. such claims; this section has the sole purpose of protecting the
e) Verify that the user has already received a copy of these integrity of the free software distribution system which is
materials or that you have already sent this user a copy. implemented by public license practices. Many people have made
For an executable, the required form of the “work that uses the generous contributions to the wide range of software distributed
Library” must include any data and utility programs needed for through that system in reliance on consistent application of that
reproducing the executable from it. However, as a special exception, system; it is up to the author/donor to decide if he or she is willing to
the materials to be distributed need not include anything that is distribute software through any other system and a licensee cannot
normally distributed (in either source or binary form) with the major impose that choice.
components (compiler, kernel, and so on) of the operating system on This section is intended to make thoroughly clear what is believed to
which the executable runs, unless that component itself accompanies be a consequence of the rest of this License.
the executable.
12. If the distribution and/or use of the Library is restricted in certain
It may happen that this requirement contradicts the license countries either by patents or by copyrighted interfaces, the
restrictions of other proprietary libraries that do not normally original copyright holder who places the Library under this
accompany the operating system. Such a contradiction means you License may add an explicit geographical distribution limitation
cannot use both them and the Library together in an executable that excluding those countries, so that distribution is permitted only in
you distribute. or among countries not thus excluded. In such case, this License
7. You may place library facilities that are a work based on the incorporates the limitation as if written in the body of this
Library side-by-side in a single library together with other library License.
facilities not covered by this License, and distribute such a 13. The Free Software Foundation may publish revised and/or new
combined library, provided that the separate distribution of the versions of the Lesser General Public License from time to time.
work based on the Library and of the other library facilities is Such new versions will be similar in spirit to the present version,
otherwise permitted, and provided that you do these two things: but may differ in detail to address new problems or concerns.
a) Accompany the combined library with a copy of the same Each version is given a distinguishing version number. If the Library
work based on the Library, uncombined with any other specifies a version number of this License which applies to it and
library facilities. This must be distributed under the terms of “any later version”, you have the option of following the terms and
the Sections above. conditions either of that version or of any later version published by
b) Give prominent notice with the combined library of the fact the Free Software Foundation. If the Library does not specify a
that part of it is a work based on the Library, and explaining license version number, you may choose any version ever published
where to find the accompanying uncombined form of the by the Free Software Foundation.
same work.
8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate
your rights under this License. However, parties who have
received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in
full compliance.
9. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify
147US

[4-109-708-14(1)]
specdef v20070110
14. If you wish to incorporate parts of the Library into other free Yoyodyne, Inc., hereby disclaims all copyright interest in the library
programs whose distribution conditions are incompatible with ‘Frob’ (a library for tweaking knobs) written by James Random
these, write to the author to ask for permission. For software Hacker.
which is copyrighted by the Free Software Foundation, write to
signature of Ty Coon, 1 April 1990
the Free Software Foundation; we sometimes make exceptions
Ty Coon, President of Vice
for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software That’s all there is to it!
and of promoting the sharing and reuse of software generally.
NO WARRANTY Required statements for OpenSSL project
15. BECAUSE THE LIBRARY IS LICENSED FREE OF used in this product
CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, This product contains OpenSSL (including the library Original
TO THE EXTENT PERMITTED BY APPLICABLE LAW.
SSLeay), which Sony uses under license with the copyright holder.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE
In compliance with a request by the copyright holder of said
COPYRIGHT HOLDERS AND/OR OTHER PARTIES software, Sony conveys the following notice and asks that you read
PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY it.
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, Package name: sony-target-grel-openssl-0.9.8g-020201.src.rpm
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS OpenSSL
FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved.
THE QUALITY AND PERFORMANCE OF THE LIBRARY IS Redistribution and use in source and binary forms, with or without
WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, modification, are permitted provided that the following conditions
YOU ASSUME THE COST OF ALL NECESSARY are met:
SERVICING, REPAIR OR CORRECTION.
1. Redistributions of source code must retain the above copyright
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW notice, this list of conditions and the following disclaimer.
OR AGREED TO IN WRITING WILL ANY COPYRIGHT
HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY 2. Redistributions in binary form must reproduce the above
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED copyright notice, this list of conditions and the following
ABOVE, BE LIABLE TO YOU FOR DAMAGES, disclaimer in the documentation and/or other materials provided
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR with the distribution.
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE 3. All advertising materials mentioning features or use of this
OR INABILITY TO USE THE LIBRARY (INCLUDING BUT software must display the following acknowledgment:
NOT LIMITED TO LOSS OF DATA OR DATA BEING “This product includes software developed by the OpenSSL
RENDERED INACCURATE OR LOSSES SUSTAINED BY Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
YOU OR THIRD PARTIES OR A FAILURE OF THE
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not
LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE),
be used to endorse or promote products derived from this
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
software without prior written permission. For written
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
permission, please contact [email protected].
END OF TERMS AND CONDITIONS 5. Products derived from this software may not be called
“OpenSSL” nor may “OpenSSL” appear in their names without
How to Apply These Terms to Your New Libraries prior written permission of the OpenSSL Project.
If you develop a new library, and you want it to be of the greatest 6. Redistributions of any form whatsoever must retain the following
possible use to the public, we recommend making it free software acknowledgment:
that everyone can redistribute and change. You can do so by “This product includes software developed by the OpenSSL
permitting redistribution under these terms (or, alternatively, under Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”
the terms of the ordinary General Public License).
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT
To apply these terms, attach the following notices to the library. It is “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES,
safest to attach them to the start of each source file to most INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
effectively convey the exclusion of warranty; and each file should WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
have at least the “copyright” line and a pointer to where the full A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
notice is found. SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE
<one line to give the library’s name and an idea of what it does.> LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
Copyright (C) <year> <name of author> SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
This library is free software; you can redistribute it and/or modify it
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
under the terms of the GNU Lesser General Public License as
OR PROFITS; OR BUSINESS INTERRUPTION)
published by the Free Software Foundation; either version 2.1 of the
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
License, or (at your option) any later version.
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
This library is distributed in the hope that it will be useful, but (INCLUDING NEGLIGENCE OR OTHERWISE)
WITHOUT ANY WARRANTY; without even the implied warranty ARISING IN ANY WAY OUT OF THE USE OF THIS
of MERCHANTABILITY or FITNESS FOR A PARTICULAR SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
PURPOSE. See the GNU Lesser General Public License for more SUCH DAMAGE.
details.
This product includes cryptographic software written by Eric Young
You should have received a copy of the GNU Lesser General Public ([email protected]). This product includes software written by
License along with this library; if not, write to the Free Software Tim Hudson ([email protected]).
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-
1307 USA
Original SSLeay License
Also add information on how to contact you by electronic and paper
mail. Original SSLeay
Copyright (C) 1995-1998 Eric Young ([email protected])
You should also get your employer (if you work as a programmer) or All rights reserved.
your school, if any, to sign a “copyright disclaimer” for the library,
if necessary. Here is a sample; alter the names: This package is an SSL implementation written by Eric Young
([email protected]).
148US

[4-109-708-14(1)]
specdef v20070110
The implementation was written so as to conform with Netscapes FreeType

SSL. The FreeType Project is copyright (C) 1996-2000 by David Turner,
This library is free for commercial and non-commercial use as long Robert Wilhelm, and Werner Lemberg. All rights reserved except as
as the following conditions are aheared to. The following conditions specified below.
apply to all code found in this distribution, be it the RC4, RSA, lhash, THE FREETYPE PROJECT IS PROVIDED ‘AS IS’ WITHOUT
DES, etc., code; not just the SSL code. The SSL documentation
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
included with this distribution is covered by the same copyright
INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF
terms except that the holder is Tim Hudson ([email protected]). MERCHANTABILITY AND FITNESS FOR A PARTICULAR
Copyright remains Eric Young’s, and as such any Copyright notices PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR
in the code are not to be removed. COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES
If this package is used in a product, Eric Young should be given CAUSED BY THE USE OR THE INABILITY TO USE, OF THE
attribution as the author of the parts of the library used. FREETYPE PROJECT.
This can be in the form of a textual message at program startup or in
documentation (online or textual) provided with the package. Notice about NetBSD Software
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
BSD License
Copyright (c) 1994-2004 The NetBSD Foundation, Inc. All rights
are met:
reserved.
1. Redistributions of source code must retain the copyright notice,
Redistribution and use in source and binary forms, with or without
this list of conditions and the following disclaimer.
modification, are permitted provided that the following conditions
2. Redistributions in binary form must reproduce the above are met:
copyright notice, this list of conditions and the following
1. Redistributions of source code must retain the above copyright
disclaimer in the documentation and/or other materials provided
notice, this list of conditions and the following disclaimer.
with the distribution.
2. Redistributions in binary form must reproduce the above
3. All advertising materials mentioning features or use of this
copyright notice, this list of conditions and the following
software must display the following acknowledgement:
disclaimer in the documentation and/or other materials provided
“This product includes cryptographic software written by Eric
with the distribution.
Young ([email protected])”
The word ‘cryptographic’ can be left out if the rouines from the 3. All advertising materials mentioning features or use of this
library being used are not cryptographic related :-). software must display the following acknowledgement:
This product includes software developed by the NetBSD
4. If you include any Windows specific code (or a derivative
Foundation, Inc. and its contributors.
thereof) from the apps directory (application code) you must
include an acknowledgement: 4. Neither the name of The NetBSD Foundation nor the names of its
“This product includes software written by Tim Hudson contributors may be used to endorse or promote products derived
([email protected])” from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” THIS SOFTWARE IS PROVIDED BY THE REGENTS AND
AND ANY EXPRESS OR IMPLIED WARRANTIES, CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR IMPLIED WARRANTIES OF MERCHANTABILITY AND
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER OR PROFITS; OR BUSINESS INTERRUPTION)
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
THE POSSIBILITY OF SUCH DAMAGE. ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available The following notices are required to satisfy the license terms of the
version or derivative of this code cannot be changed. i.e. this code software that we have mentioned in this document:
cannot simply be copied and put under another distribution licence This product includes software developed by Adam Glass.
[including the GNU Public Licence.] This product includes software developed by Bill Paul.
This product includes software developed by Charles M. Hannum.
This product includes software developed by Christian E. Hopps.
This product includes software developed by Christopher G.
Demetriou.
This product includes software developed by Christopher G.
Demetriou for the NetBSD Project.
This product includes software developed by Christos Zoulas.
This product includes software developed by Gardner Buchanan.
This product includes software developed by Gordon W. Ross
149US

[4-109-708-14(1)]
specdef v20070110
This product includes software developed by Jonathan Stone for the Portions copyright Robert de Bath, Joris van Rantwijk, Delian
NetBSD Project. Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas
This product includes software developed by Manuel Bouyer. Barry, Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa,
This product includes software developed by Rolf Grossmann. Markus Kuhn, and CORE SDI S.A.
This product includes software developed by TooLs GmbH. Permission is hereby granted, free of charge, to any person obtaining
This product includes software developed by the NetBSD
a copy of this software and associated documentation files (the
Foundation, Inc. and its contributors. “Software”), to deal in the Software without restriction, including
This product includes software developed by the University of without limitation the rights to use, copy, modify, merge, publish,
California, Berkeley and its contributors.
distribute, sublicense, and/or sell copies of the Software, and to
This product includes software developed by the University of permit persons to whom the Software is furnished to do so, subject
California, Lawrence Berkeley Laboratory and its contributors. to the following conditions:
This product includes software developed by the University of
The above copyright notice and this permission notice shall be
California, Lawrence Berkeley Laboratory. included in all copies or substantial portions of the Software.
This product includes software developed for the NetBSD Project by
Wasabi Systems, Inc. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT
This product includes software developed for the NetBSD Project by WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
Matthias Drochner.. INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
Notice about JPEG SIMON TATHAM BE LIABLE FOR ANY CLAIM, DAMAGES
Parts of this product utilize the research results of the Independent OR OTHER LIABILITY, WHETHER IN AN ACTION OF
JPEG Group. CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
Package name sony-target-grel-libjpeg-6b-020201.src.rpm. OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE
In plain English: OR OTHER DEALINGS IN THE SOFTWARE.
1. We don’t promise that this software works. (But if you find any
bugs, please let us know!) Notice about fdlibm Software
@(#)fdlibm.h 1.5 95/01/18
2. You can use this software for whatever you want. You don’t
Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
have to pay us.
Developed at SunSoft, a Sun Microsystems, Inc. business.
3. You may not pretend that you wrote this software. If you use it
Permission to use, copy, modify, and distribute this software is freely
in a program, you must acknowledge somewhere in your
granted,provided that this notice is preserved.
documentation that you’ve used the IJG code.
In legalese:
The authors make NO WARRANTY or representation, either
Notice about Root Certificates
express or implied, with respect to this software, its quality, In addition, the Runtimes and Runtime Components may contain one
accuracy, merchantability, or fitness for a particular purpose. This or more root certificates (herein referred to as “Root Certificates”).
software is provided “AS IS”, and you, its user assume the entire risk You may not modify the Root Certificates.
as to its quality and accuracy.
This software is copyright (c) 1991-1998, Thomas G. Lane. Notice about Nano-XML
All Rights Reserved except as specified below. Copyright (C) 2000-2002 Marc De Scheemaecker, All Rights
Reserved.
Permission is hereby granted to use, copy, modify, and distribute this This software is provided ‘as-is’, without any express or implied
software (or portions thereof) for any purpose, without fee, subject warranty. In no event will the authors be held liable for any damages
to these conditions: arising from the use of this software.
(1) If any part of the source code for this software is distributed, then
this README file must be included, with this copyright and no- Permission is granted to anyone to use this software for any purpose,
warranty notice unaltered; and any additions, deletions, or changes including commercial applications, and to alter it and redistribute it
to the original files must be clearly indicated in accompanying freely, subject to the following restrictions:
documentation. 1. The origin of this software must not be misrepresented; you must
(2) If only executable code is distributed, then the accompanying not claim that you wrote the original software. If you use this
documentation must state that “this software is based in part on the software in a product, an acknowledgment in the product
work of the Independent JPEG Group”. documentation would be appreciated but is not required.
(3) Permission for use of this software is granted only if the user
accepts full responsibility for any undesirable consequences; the 2. Altered source versions must be plainly marked as such, and
authors accept NO LIABILITY for damages of any kind. must not be misrepresented as being the original software.
These conditions apply to any software derived from or based on the 3. This notice may not be removed or altered from any source
IJG code, not just to the unmodified library. If you use our work, you distribution.
ought to acknowledge us.
Permission is NOT granted for the use of any IJG author’s name or
company name in advertising or publicity relating to this software or
products derived from it. This software may be referred to only as
“the Independent JPEG Group’s software”.
We specifically permit and encourage the use of this software as the
basis of commercial products, provided that all warranty or liability
claims are assumed by the product vendor.
Notice about PuTTY Software

This product contains some code of the application PuTTY.
Source package: putty-0.58.tar.gz
License text: http://www.chiark.greenend.org.uk/~sgtatham/putty/
licence.html
PuTTY is copyright 1997-2006 Simon Tatham.
150US

[4-109-708-14(1)]
specdef v20070110
BD-RE
Glossary BD-RE (Blu-ray Disc Rewritable) is a
recordable and rewritable Blu-ray Disc,
AACS available in the same capacities as the BD
“Advanced Access Content System” is a below. The re-recordable feature makes
specification for managing digital entertainment extensive editing and time-shifting applications
contents stored on the next generation of possible.
prerecorded and recorded optical media. The BD-ROM
specification enables consumers to enjoy digital BD-ROMs (Blu-ray Disc Read-Only Memory)
entertainment content, including high-definition are commercially produced discs and are
content. available in the same capacities as the BD
AVCHD below. Other than conventional movie and video
The AVCHD format is a high-definition digital contents, these discs have enhanced features
video camera format used to record SD such as interactive content, menu operations
(standard definition) or HD (high definition) using pop-up menus, selection of subtitle
signals of either the 1080i specification* or the display, and slideshow. Although a BD-ROM
720p specification** on DVDs, using efficient may contain any form of data, most BD-ROM
data compression coding technology. The discs will contain movies in High Definition
MPEG-4 AVC/H.264 format is adopted to format, for playback on Blu-ray Disc/DVD
compress video data, and the Dolby Digital or players.
Linear PCM system is used to compress audio Blu-ray Disc (BD)
data. The MPEG-4 AVC/H.264 format is A disc format developed for recording/playing
capable of compressing images at higher high-definition (HD) video (for HDTV, etc.),
efficiency than that of the conventional image and for storing large amounts of data. A single
compression format. The MPEG-4 AVC/H.264 layer Blu-ray Disc holds up to 25 GB, and a
format enables a high definition (HD) video dual-layer Blu-ray Disc holds up to 50 GB of
signal shot on a digital video camera recorder to data.
be recorded on DVD discs in the same way as it
would be for a standard definition (SD) Digital Cinema Auto Calibration
television signal. Digital Cinema Auto Calibration was developed
* A high definition specification that utilizes 1080 by Sony to automatically measure and adjusts
effective scanning lines and the interlace format. the speaker settings to your listening
** A high definition specification that utilizes 720 environment in a short period of time.
effective scanning lines and the progressive format.
Dolby Digital
BD-J application This movie theater sound format is more
The BD-ROM format supports Java for advanced than Dolby Surround Pro Logic. In
interactive functions. this format, the surround speakers output stereo
“BD-J” offers content providers almost sound with an expanded frequency range, and a
unlimited functionality when creating subwoofer channel for deep bass is
interactive BD-ROM titles. independently provided. This format is also
BD-R called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
BD-R (Blu-ray Disc Recordable) is a
only when a deep bass effect is needed). All six
recordable, write-once Blu-ray Disc, available
channels in this format are recorded separately
in the same capacities as the BD below. Since
for superior channel separation. Furthermore,
contents can be recorded and cannot be
since all the signals are processed digitally, less
overwritten, a BD-R can be used to archive
signal degradation occurs.
valuable data or storing and distributing video
material.
151US

[4-109-708-14(1)]
specdef v20070110
Dolby Digital Plus being recorded discretely and processed in

Developed as an extension to Dolby Digital, the digitally.
audio coding technology supports 7.1 multi- DTS-HD High Resolution Audio
channel surround sound.
Developed as an extension to DTS Digital
Dolby Pro Logic II Surround format. It supports a maximum
Dolby Pro Logic II creates five full-bandwidth sampling frequency of 96 kHz, and 7.1 multi-
output channels from 2 channel sources. This is channel surround.
done using an advanced, high-purity matrix DTS-HD High Resolution Audio has a
surround decoder that extracts the spatial maximum transmission rate of 6 Mbps, with
properties of the original recording without lossy compression (Lossy).
adding any new sounds or tonal colorations. DTS-HD Master Audio
x Movie mode DTS-HD Master Audio has a maximum
The Movie mode is for use with stereo television transmission rate of 24.5 Mbps, and uses
shows and all programs encoded in Dolby lossless compression (Lossless), and DTS-HD
Surround. The result is enhanced sound field Master Audio corresponds to a maximum
directionality that approaches the quality of sampling frequency of 192 kHz, and maximum
discrete 5.1-channel sound. of 7.1ch.
x Music mode HDMI (High-Definition Multimedia
The Music mode is for use with any stereo music Interface)
recordings, and provides a wide and deep sound HDMI is an interface that supports both video
space. and audio on a single digital connection,
Dolby Surround Pro Logic allowing you to enjoy high quality digital
picture and sound. The HDMI specification
As one method of decoding Dolby Surround,
supports HDCP (High-bandwidth Digital
Dolby Surround Pro Logic produces four
Content Protection), a copy protection
channels from 2 channel sound. Compared with
technology that incorporates coding technology
the former Dolby Surround system, Dolby
for digital video signals.
Surround Pro Logic reproduces left-to-right
panning more naturally and localizes sounds Interlace format
more precisely. To take full advantage of Dolby (Interlaced scanning)
Surround Pro Logic, you should have one pair of The Interlace format is the NTSC standard
surround speakers and a center speaker. The method for displaying TV images at 30 frames
surround speakers output monaural sound. per second. Each frame is scanned twice -
Dolby TrueHD
alternately between the even numbered scanning
lines and then odd numbered scanning lines, at
Dolby TrueHD is a lossless coding technology
60 times per second.
that supports up to 8 channels of multi-channel
surround sound for the next generation optical LTH (Low to High)
discs. The reproduced sound is true to the LTH is a recording system that supports organic
original source bit-for-bit. pigment type BD-R.
DTS Parental Control
Digital audio compression technology A function of the BD/DVD to limit playback of
developed by DTS, Inc. This technology the disc by the age of the users according to the
conforms to 5.1-channel surround. This format limitation level in each country. The limitation
comprises of stereo rear channel and there is varies from disc to disc; when it is activated,
discrete subwoofer channel in this format. DTS playback is completely prohibited, violent
provides the same 5.1 discrete channels of high scenes are skipped or replaced with other scenes
quality digital audio. The good channel and so on.
separation is realized due to the all channel data
152US

[4-109-708-14(1)]
specdef v20070110
PhotoTV HD This standard can express a wider color range

“PhotoTV HD” allows for a highly-detailed than the currently used broadcast standard.
pictures, and photo-like expression of subtle 24p True Cinema
textures and colors. By connecting Sony
Movies shot with a film camera consist of 24
“PhotoTV HD” compatible devices using an
frames per second.
HDMI cable, whole new world of photos can be
Since conventional televisions (both CRT and
enjoyed in breathtaking Full HD quality. For
flat panels) display frames either at 1/60 or 1/50
instance, the delicate texture of the human skin,
second intervals, the 24 frames do not appear at
flowers, sand and waves can now be displayed
an even pace.
on a large screen in beautiful photo-like quality.
When connected to a TV with 24p capabilities,
Pop-up menu the player displays each frame at 1/24 second
An enhanced menu operation available on BD- intervals — the same interval originally shot
ROMs. The pop-up menu appears when POP with the film camera, thus faithfully reproducing
UP/MENU is pressed during playback, and can the original cinema image.
be operated while playback is in progress.
Progressive format
(sequential scanning)
In contrast to the Interlace format, the
progressive format can reproduce 50 - 60 frames
per second by reproducing all scanning lines
(525 lines for the NTSC system). The overall
picture quality increases and still images, text
and horizontal lines appear sharper. This format
is compatible with the 525 or 625 progressive
format.
S-AIR
(Sony Audio Interactive Radio
frequency)
Recent times have seen the rapid spread of DVD
media, Digital Broadcasting, and other high-
quality media.
To ensure that the subtle nuances of these high-
quality media are transmitted with no
deterioration, Sony has developed a technology
called “S-AIR” for the radio transmission of
digital audio signals with no compression, and
has incorporated this technology into the EZW-
RT10/EZW-T100.
This technology transfers digital audio signals
with no compression using the 2.4 GHz band
range of ISM band (Industrial, Scientific, and
Medical band), such as wireless LANs and
Bluetooth applications.
x.v.Color
x.v.Color is a familiar term for the xvYCC
standard proposed by Sony.
xvYCC is an international standard for Color
space in video.
153US

[4-109-708-14(1)]
motojima\Desktop\09_24\4109708141\4109708141_BDV-IT1000ES-IS1000\gb_IX.fm] masterpage:Left
specdef v20070110
Index
Numerics DVD Parental Control 112 Pause Mode 110
Photo Settings 114
24p True Cinema 153 E PhotoTV HD 76, 153
A Easy Setup 60, 118 Playable discs 130
POP UP/MENU 69
ANGLE 68 F Progressive format 153
Attenuate - SAT/CABLE 111
Attenuate - TV 111 Front panel 10
Front panel display 11 R
Audio 112
Fs Limit 111 Rear panel 12
Audio DRC 111
Region code 131
Audio Settings 111
Auto Calibration 98, 111
H Remote 16
HDMI Resetting 119
Auto Display 116
YCbCr/RGB 115 Resume Play 68
AVCHD 132, 151
HDMI (High-Definition
B Multimedia Interface) 152 S
HDMI Settings 114 S-AIR 5, 89, 153
BD Audio Setting 111
Hybrid Disc Playback Layer S-AIR ID 89, 116
BD Data 69, 127
113 S-AIR Pairing 92, 116
BD Internet Connection 113
S-AIR receiver 89
BD Parental Control 112
BD/DVD Menu 112
I S-AIR RF Change 94, 116
Instant Advance 66 S-AIR Standby 92, 116
BD/DVD Viewing Settings 112
Instant Replay 66 Screen Format 109
BDAV 130
Interlace format 152 Screen Saver 116
BD-Live 69
Internet Settings 117 Slideshow Speed 114
BDMV 130
Sound Mode 80
BD-R 151
BD-RE 151
L Speaker Settings 100, 111
Language Code List 139 Connection 100
Blu-ray Disc 151
LTH 152 Distance 100
C Level 101
CD 73, 130
M Standby Mode 116
MOVIE-D.C.S.- 80 Subtitle 112
Child Lock 106
Multiplex broadcast sound 82 Surround amplifier 13, 89
Cinema Conversion Mode 110
System Information 116
Control for HDMI 67, 95, 114
N
T
D Naming preset stations 85
Test Tone 101
D. C. A. C. (Digital Cinema Network Settings 117
TV Type 109
Auto Calibration) 98, 151 Network Update 108
Digital Cinema Sound 80 NIGHT 105 U
DIGITAL MEDIA PORT 88
Dimmer 116 O Update 108
Disc Lock 67 One-Touch Play 67
V
Dolby Digital 81, 151 OPTIONS 75
Dolby Digital Plus 152 OSD 116 Video Settings 109
Dolby Pro Logic II 152 Output Video Format 110
Dolby Surround Pro Logic 152
X
Dolby TrueHD 152 P x.v.Color 115, 153
DTS 81, 152 PARENTAL CONTROL 152
DTS-HD 152 Parental Control 66
DUAL MONO 82 Parental Control Region Code
DVD 65, 130 113
DVD Aspect Ratio 109 Password 113
154US

[4-109-708-14(1)]

BD/DVD Home Theatre System: BDV-IT1000ES/BDV-IS1000

Uploaded by

Copyright:

Available Formats

BD/DVD Home Theatre System: BDV-IT1000ES/BDV-IS1000

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

BD/DVD Home Theatre System: BDV-IT1000ES/BDV-IS1000

Uploaded by

Copyright:

Available Formats

4-109-708-14(1)

BD/DVD Home Theatre System

WARNING Date of Manufacture Marking is located on the rear

model name [BDV-IT1000ES/BDV-IS1000]

model name [BDV-IT1000ES/BDV-IS1000]

“Dolby”, “Pro Logic”, and the double-D

model name [BDV-IT1000ES/BDV-IS1000]

About the S-AIR function

• Surround amplifier (supplied): You can enjoy

The S-AIR product can be purchased as an

Notes or instructions for the surround amplifier

model name [BDV-IT1000ES/BDV-IS1000]

model name [BDV-IT1000ES/BDV-IS1000]

• : For system operations

Remote control A THEATER (96)

FAVORITES CC WIDE receiver, or set to standby mode.

Opens or closes the disc tray.

7 OPERATION CHANGE (16, 101)

Changes the source to be operated on the

: You can operate TV.

9 : You can operate the unit.

MUTING Enters the title/chapter numbers or radio

model name [BDV-IT1000ES/BDV-IS1000]

D AUDIO (81) G TOP MENU (69)

model name [BDV-IT1000ES/BDV-IS1000]

I ./> (previous/next) (65, 73, 75) K SLEEP (106)

Pauses or re-starts playback.

Stops playback and remembers the stop

model name [BDV-IT1000ES/BDV-IS1000]

A "/1 (on/standby) (65) C S-AIR indicator

model name [BDV-IT1000ES/BDV-IS1000]

Front panel display

About the indications in the front panel display

D + EX TrueHD TUNED MONO ST EXT HD SLEEP 24P NIGHT

A Playing status H Lights up when the system is

model name [BDV-IT1000ES/BDV-IS1000]

COMPONENT VIDEO OUT VIDEO OUT IR REMOTE TV OPTICAL SAT/CABLE DIGITAL

VIDEO S-VIDEO OUT IN COAXIAL

COMPONENT VIDEO OUT VIDEO OUT TV OPTICAL SAT/CABLE DIGITAL

VIDEO S-VIDEO COAXIAL

A LAN (100) terminal (56) J AM terminal (53)

model name [BDV-IT1000ES/BDV-IS1000]

Front panel Rear panel

PHONES SURROUND SELECTOR R

A PHONES jack (58) F Wireless transceiver (EZW-RT10) slot

C POWER / ON LINE indicator (58, 89) G S-AIR ID switch (58, 89)

D PAIRING indicator (92) H SPEAKER L jack (45)

E PAIRING (92) I SPEAKER R jack (45)

model name [BDV-IT1000ES/BDV-IS1000]

• Wall mounting brackets • Remote commander

• R6 (size AA) batteries (2)

• Bracket covers (10)

• Desktop stands (4)

• AM loop antenna (aerial) (1) • Speaker cord cover (1)

• Baffle covers (short 3, long • FM wire antenna (aerial) (1)

• Wireless transceivers for the

model name [BDV-IT1000ES/BDV-IS1000]

• Video cord (1) • Surround amplifier (1)

• R6 (size AA) batteries (2)