» CP6012 «

6U Intel® Core™ Duo Processor PICMG 2.16 Blade

» Highest Performance / Watt
Intel® T2500 Duo processor 2.0 GHz
» Highest Memory Density
Up to 4 GByte dual-channel, DDR2, 400 MHz memory
» Highest Versatility
Comprehensive I/O capabilities: GigEthernet, PMC/XMC, USB, VGA,
SATA, CompactFlash …

If it’s embedded, it ’s Kontron.

 CP6012

The Power of Intel® Core™ Duo

Nearly double your processing power...
Explore the power and the potential of two cores in » Unique Versatility
one processor with Kontron's CP6012 based on the The highly integrated CP6012 features a XMC site
Intel® Core™ Duo processor. according to XMC.3 supporting x8 PCI Express
(alternatively a 64/66 PCI PMC site), an onboard 2.5-inch
The CP6012, a 6U CompactPCI CPU board with Intel® SATA hard disk and CompactFlash - all usable at the same
Core™ Duo processor meets the highest performance time in a single slot.
demands. Combined with the E7520 and 6300ESB The Intel 6300ESB I/O Controller Hub provides advanced
chipset, it handles server-like data throughput and I/O technology including USB 2.0 and Serial ATA150. Four
provides next generation bandwidth capabilities. Gigabit Ethernet ports (2x ports at the front and 2x for
full PICMG 2.16 support) provide comprehensive
» Greater Performance / Watt connectivity capabilities, enabling innovative applications
Compared to previous processor designs the dual-core today by offering enough headroom for the emerging next
technology allows approximately twice the performance generation requirements. Highly versatile, the CP6012 can
at similar power consumption. be used in a system or peripheral slot. A rich set of LEDs
The PICMG 2.16-compliant Kontron CP6012 offers up to at the front panel for debug and diagnose, as well as full
4 GB dual-channel 400 MHz DDR2 registered ECC SDRAM rear I/O connectivity completes the CP6012.
(via two 200-pin SODIMM sockets), providing up to
6.4 GB/sec data throughput. The CP6012 is designed » Longterm Availability
for bandwidthintensive applications and thanks to Delivering a stable product based on Intel’s embedded
hotswap support and IPMI (PICMG 2.9 - compliant product line, the CP6012 ensures long term availability.
Intelligent Platform Management Interface) the CPU This eliminates the risk of unplanned design changes and
board meets the highest demands for the management unexpected expensive application modification.
of high-availability applications. Many of these are While minimizing deployment risks, the CP6012 provides
data and tele-communications applications, but also a broad range of software support to ease the process of
include highly sensitive, securityrelated solutions as product integration and maximize the competitive
well as image processing systems in medical technology advantage of meeting the time-to-market window.
and other vertical industries.

2 www.kontron.com
 CP6012

Technical Information

Processor Intel® Core™ Duo processor in micro-FCBGA package (65nm manufacturing process)
» T2500: 2.00 GHz, 667 MHz FSB, 2 MB L2, FCBGA
» L2400: LV 1.66 GHz, 667 MHz FSB, 2 MB L2, FCBGA
All board versions are provided with a passive heatsink within 4HP height. Forced air cooling at a specific flow rate is
required.

Memory Controller Intel® E7520 supporting various RASUM features

Memory » Up to 4 GB DDR2 400 MHz dual channel registered SDRAM w/ ECC via two 200-pin SODIMM sockets for
max. 6.4 GB/sec data throughput
» 2 redundant 1 MB Firmware Hubs (FWH) for BIOS
» 8 kB for storing CMOS data when operating without battery

I/O » Four 10/100/1000 MB/s Gigabit Ethernet ports based on two Intel® 82571EB dual Gigabit Ethernet PCI Express bus
controllers (two copper ports are routed to the front and two copper ports are routed to PICMG 2.16 rear pins)
» Four USB 2.0 interfaces with up to 480 Mbit/sec, two front, two rear
» VGA Video Controller ATI ES1000 2D-engine, PCI 32-bit / 33 MHz, external memory 64MB
» Two 16C550 compatible UARTs (COM1/2)
» Keyboard on rear and onboard connector
» Mouse interface on rear
» Floppy disk controller on rear

Front Panel Functions

COM1 9-pin D-Sub (RS232)
VGA 15-pin D-Sub SVGA connector
Ethernet 2x RJ-45
USB 2x 4-pin connectors
PMC/XMC opening for PMC/XMC front panel
LEDs 2x LAN activity (yellow) and speed (green), one blue control LED for hot swap, 2x for IPMI, 1x watchdog, 1x thermal
control, 8-LED-field for BIOS POST code or general purpose
Reset reset button, guarded
Micro switch for hot swap

Onboard Interfaces » One SATA connection for an onboard 2.5” SATA HDD
» CompactFlash type II socket
» 22-pin connector with all LPC signals
» PS/2 keyboard connector
» 2x 200-pin SODIMM connectors
» 4x 64-pin PMC interface
» 1x 114-pin XMC connector

I/O Table Summary

Front I/O Rear I/O Onboard Connector Total
Video 1 1 - 1
USB 2 2 - 4
Serial 1 2 - 2
PS/2 Mouse - 1 - 1
PS/2 Keyboard - 1 1 1
Ethernet 2 2 - 4
ATA100 - 1 - 1
SATA150 - 2 1 2
CompactFlash - - 1 1
PMC or XMC 1 via J4 4/1 1
Floppy - 1 - 1

CompactPCI Bus Interface » PICMG 2.0 Rev. 3.0 compatible, 64-bit / 66 MHz
» 5V or 3.3V signalling, REQ/GNT for 7 slots
» Operating in system slot as system master and in peripheral slot in PCI passive mode (no communication to CPCI bus)
PMC/XMC Slot » One 64-bit / 66MHz PMC slot, Pn1-Pn4, rear I/O Pn3 to J4, 3.3 V PCIvoltage
» Alternatively one XMC slot via P15, supporting XMC.3 x8 PCIExpress
Supervisory Functions, » Watchdog, software configurable, 125 msec to 256 sec, generates IRQ, NMI or hardware reset
Clock/Calendar » Hardware monitor for thermal control, fan speed, and all onboard voltages
» RTC (integrated in 6300ESB) and CMOS RAM with backup, battery replaceable

Rear I/O via J3/J4/J5 » J3: PICMG 2.16, VGA, COM 1/2, keyboard, mouse, USB 3/4
» J4: PMC rear I/O
» J5: SATA 1/2, IDE (secondary)

IPMI IPMI 1.5-compliant for IPMI based management and CompactPCI System Management PICMG 2.9 R1.0

Compliancy » CompactPCI Core Specification PICMG 2.0 Rev. 3.0

» CompactPCI Hot Swap Specification PICMG 2.1 R2.0
» CompactPCI System Management PICMG 2.9 R1.0
» CompactPCI Packet Switching Backplane PICMG 2.16 R1.0
Designed to meet or exceed:
» Safety: UL 1950, UL 94, CSA 22.2 No 950, EN 60950, IEC 950
» EMI/EMC: EN 55022 / EN 55024, EN 50081-1 / EN 6100-6-2

General
Dimensions 233 x 160 x 20.5 mm, 6U, 4HP
Weight 400g
MTBF 157,696h @ 30°C / 86°F (Bellcore Issue 6)

3 www.kontron.com
 CP6012

Technical Information
Software Support » AMI BIOS with POST codes, setup console redirection to serial port (VT100 mode) with CMOS setup access, BIOS
parameters saved in EEPROM, diskless, keyboardless, videoless operation
» LAN boot support
» Board identification number accessible via EEPROM
» Support for Windows® XP, XP Embedded, Windows® Server 2003, Linux®, VxWorks
(other OSs may be possible, please contact us for information)
Power Consumption CP6012 equipped with 2GB memory:
» LV 1.66 GHz: max 34 W
» 2.0 GHz: max 52 W

Environmental
Operating temp. 0°C to +60°C standard with LV 1.66 GHz (with forced airflow)
Storage temp. - 55°C to + 85°C (without battery or HDD)
Climatic Humidity 93% RH at 40°C, non condensing (acc. to IEC 60068-2-78)
Altitude 50,000 ft (15,240 m)

Ordering Information

Article Order-No. Description

CP6012 34567 Intel® Core™ Duo L2400 LV 1.66 GHz, 2xGigEthernet on FP, 2xGigEthernet on PICMG2.16/RIO, 5V I/O
CP6012 35324 Intel® Core™ Duo L2400 LV 1.66 GHz, 2xGigEthernet on FP, 2xGigEthernet on PICMG2.16/RIO, 3.3V I/O
CP6012 1021-9624 Intel® Core™ Duo T2500 2.0 GHz, 2xGigEthernet on FP, 2xGigEthernet on PICMG2.16/RIO, 5V I/O

CP6012 1021-9625 Intel® Core™ Duo T2500 2.0 GHz, 2xGigEthernet on FP, 2xGigEthernet on PICMG2.16/RIO, 3.3V I/O
Memory Modules
SODIMM-DDR2-512-ECC 33473 512MB, SODIMM, DDR2 SDRAM, PC400, 200-pin, registered ECC
SODIMM-DDR2-1G-ECC 33474 1GB, SODIMM, DDR2 SDRAM, PC400, 200-pin, registered ECC
SODIMM-DDR2-2G-ECC 34847 2GB, SODIMM, DDR2 SDRAM, PC400, 200-pin, registered ECC

All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is
Services

believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners.
CP6-RIO-216 27829 Assembly of connectors J4/J5 and rear IO configuration for CP6012
CP6-RIO-216-NOJ4 27830 Assembly of connector J5 (no J4) and rear IO configuration for CP6012
CP6012-MK2.5SATA 1) 33477 Mounting kit for 2,5” SATA-HDD onboard, mounting within 4HP
Rear Transition Modules
CP-CTM80-3 Various 4HP versions available
Software Support
KIT-CP6012 2) 33475 Documentation and Windows driver kit on CD-ROM
LIN-BSP-CP6012 2) 33476 Linux BSP CP6012 for Suse and RedHat
VXW-BSP-CP6012 36157 VxWorks 6.4 BSP CP6012 with single core support
VXW-BSP-CP6012-SMP 1021-9791 VxWorks 6.6 BSP CP6012 with SMP support

1) HDD must be ordered separately

2) Free of charge, downloadable from the Internet
Please contact your local sales representative for other configuration options.

Corporate Offices
Europe, Middle East & Africa North America Asia Pacific
Oskar-von-Miller-Str. 1 14118 Stowe Drive 17 Building,Block #1,ABP.
85386 Eching/Munich Poway, CA 92064-7147 188 Southern West 4th Ring Road
Germany USA Beijing 100070, P.R.China
#CP6012# 02242009PAK

Tel.: +49 (0)8165/ 77 777 Tel.: +1 888 294 4558 Tel.: + 86 10 63751188
Fax: +49 (0)8165/ 77 279 Fax: +1 858 677 0898 Fax: + 86 10 83682438
[email protected] [email protected] [email protected]

4 www.kontron.com