Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Agitador de Tubos (Vortex) - Daigger - Genie 2 USUARIO

    Uploaded by

    Nathaniel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Agitador de Tubos (Vortex) - Daigger - Genie 2 USUARIO

    Uploaded by

    Nathaniel
    9 views4 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views4 pages

    Agitador de Tubos (Vortex) - Daigger - Genie 2 USUARIO

    Uploaded by

    Nathaniel

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    w,&wwwKw A. Daigger & Company, lnc.

    620 Lake View Parkway, Vernon Hills, lL 60061


    Phone: 800-621-7 193 . Fax: 800-320-7200
    www.daigger.com

    *Vortex-Genieo 2 is a registered trademark of Scientific lndustries, lnc-


    U.S.Pat. 4.781.487 : 5.7 07 .861
    The VORTEX-GENIE@ 2 Mixer with Pop-off Cup and 3-inch Platform, is an enhanced
    version of the ORIGINAL VORTEX-GENIE@ Mixer produced by Scientific lndustries.
    VORTEX-GENIE mixers are the "Gold Standard" for laboratory mixers. The quality
    and reliability, that you have come to know so well, are characteristics that are, by
    design, an integral part of all GENIETM products.

    APPLICATIONS
    The 3-inch Platform accepts single or multiple test tubes,
    beakers and various flasks. The removable cover, made of
    thermoplastic rubber, is highly impervious to chemicals. lt
    is, however recommended that spills are blotted quickly. Do
    not attempt to use the 3-inch Platform without the rubber
    cover.

    The Pop-off Cup can accommodate tubes of virtually any


    size or shape from micro tubes to those up to 40mm in
    diameter and 200mm in length. ln most instances, tubes
    without caps may be mixed with proper speed control.
    Tubes must be capped when potential aerosols may be haz-
    ardous.

    Catalog numbers:
    0K-0500-902 3-inch Platform with Rubber Cover
    0K-0500-901 3-inch Platform without Rubber Cover
    580-20'1 3-00 Rubber Cover for 3-inch Platform

    OPERATI NG I NSTRUGTIONS
    We recommend you retain the original packaging for 90
    days in case you need to return the product for any reason
    to Daigger or Scientific lndustries.

    1.0 - Plug the cord into a properly grounded, three


    pronged outlel (120 VAC for the G560 model and
    230 VAC for the G560E model).

    2.0 - The VORTEX-GENIE 2 Mixer has the following modes of operation:

    2.1 - TOUCH MODE:


    Place the toggle switch in the TOUCH position and set the speed control to any
    position between 3 and 10. A setting of 3 is least vigorous mixing and 10 is the
    most vigorous mixing. When you touch a vessel to the 3-inch Platform or Pop-
    off Cup, the mixer will start automatically. Releasing the pressure on the
    Platform or Cup will stop the mixer.

    2.2 - HANDS FREE MODE:


    Place the toggle switch in the ON position and set the speed control to any
    position between 3 and 10. Hands Free mode allows for unattended operation
    that will continue indefinitely until you stop the mixer by placing the toggle
    switch into the OFF position. ln this mode, you may use any of the accessory
    attachments available for the VORTEX-GENIE@ 2 Mixer. Review instruction
    No. 3.0 before attempting to change attachments.

    Note: The speed control switch should be set between positions 3 and 10 to
    enable the mixing action to start. After the action has started, you may, if
    desired, reduce the speed below position 3 for the duration of the run.
    Before re-starting the mixer, re-set the speed control to a setting higher than
    position 3.

    3.0 - To change accessory mixing attachments, the following sequence is to be


    followed explicitly.

    3.1 - Turn the power OFF by placing the toggle switch into the OFF position.
    3.2 - Grasp the installed attachment and pull straight up until it releases from the
    shaft. A technique of lifting the attachment with your finger tips while using
    your knuckles as a fulcrum will give you the leverage to remove the installed
    attachment component smoothly.

    3.3 - Hold the part you wish to install so the "flat" part of the shaft is aligned with
    the "flat" of the receptacle in the attachment. Alternatively, you may place the
    attachment on the shaft and turn it until you feel the "flats" aligning.

    3.4 - Press attachment firmly downward until it "snaps" into place. The VORTEX-
    GENIE 2 Mixer is now ready to use with the newly installed accessory
    attachment.

    4.Q: With prolonged use, your VORTEX-GENIE 2 Mixer may become warm to the
    touch; lt should not get HOT to the touch. The motor will radiate a certain
    amount of heat that will dissipate by the cast zinc housing.

    CAUTION! Do not lift your VORTEX-GENIE 2 Mixer by its attachment. All


    attachments, including the Pop-off Cup and the 3-inch Platform are removable.
    They will pop off easily if you lift them, and snap back on again just as easily
    by aligning the flats and pressing down firmly.

    ,/!\ ceurroN! Failure to follow operating instructions can compromise the


    user's safety.
    CARE AND HANDLING
    Your VORTEX-GENIE 2 Mixer should be given the care normally required for any
    electrical appliance. Avoid wetting or unnecessary exposure to fumes. The finish
    can be washed with water (after unplugging) and soap or detergents, using a cloth
    or sponge. Keep the unit clean by immediately blotting any spills. Replacement
    parts are available through Daigger. Refer to "Parts Assembly List" and enclosed
    multi-fold brochure.

    A aorfloN! Unplug from power before cleaning. Do not immerse.


    SPECIFIGATIONS
    The VORTEX-GENIE'2 Mixer is classified as "lnstallation Category 2"
    Environmental:0'C - 38'C (32"F - 100'F),95% Humidity max.

    MODEL POWER REQUIRED AMPS r%


    xitiltciv
    MADE IN THE
    qE€BR
    =3-n
    G560E 230Yl50Hz 0.5
    "G0," iil*g".,"xt*^.,:r, c
    (
    Weight: a Kg (8.8 lb) - Zinc casting with shock absorbing feet
    Base Dimensions: (DxWxH ) 1 65x1 22x1 65m m (6. 5x4. 8x6. 5i n )

    PARTS ASSEMBLY LIST


    To order parts for the VORTEX-GENIE 2 Mixer:
    Contact Daigger. Please specify Part No., quantity and electric voltage

    6 (A-c)

    No.
    lndicator Part No. Description lndicator No. Part No. Description

    1 0K-0236-902 Bearing Retainer Kit 6C EB-0286-500 Speed Control 100V

    2 0K-0236-903 Eccentric Clamp 7 0K-0236-904 Eccentric with Clamp Assembly

    3A 31B-0510-02 '120V Line Cord I PP-0236-408 Bottom closure with Feet

    38 0K-0246-901 230V Line Cord, No Plug 9A 0K-0236-905 lvlotor 120V Assembly

    3C 0K-0256-901 230V Line Cord, Euro Plug SB 0K-0246-915 Motor 230V Assemblv

    3D 0K-0266-901 230V Line Cord, British Plug 9C oK-0286-915 Motor 100V Assembly

    3E 0K-0276-901 230V Line Cord, Swiss Plug 10 566-0028-00 Spring, Extension, Eccentric

    3F 0K-0286'901 '100V Line Cord '11 SCPO059 Screws, Bottom closure (4)

    3G ECP0021 Australian Plug (only) 12 0M-0236-209 Knob, Push-on

    4 ESP0004 Switch, On/Otf/On '13 0K-0500-901 3-inch Platform

    5 ESP0005 Micro Switch 14 580-2013-00 Rubber Cover for 3-inch Platform

    6A EPPOOOs Speed Control 120V 15 146-3011-00 Pop-off CUP

    68 EB-0246-500 speed control 230v

    U.S. Patent No. 4,7U,447


    Vortex-Genie'is a registered trademark of Scientific lndustries
    LTP0036 Rev. B
    O Scientific lndustries lnc. 2009

    You might also like