HP Zbook G6 Manual

User Guide
© Copyright 2019 HP Development Company, Product notice Software terms

L.P.
This user guide describes features that are By installing, copying, downloading, or
AMD is a trademark of Advanced Micro Devices, common to most models. Some features may otherwise using any software product
Inc. Bluetooth is a trademark owned by its not be available on your computer. preinstalled on this computer, you agree to be
proprietor and used by HP Inc. under license. bound by the terms of the HP End User License
Intel, Celeron, Pentium, and Thunderbolt are Not all features are available in all editions or Agreement (EULA). If you do not accept these
trademarks of Intel Corporation or its versions of Windows. Systems may require license terms, your sole remedy is to return the
subsidiaries in the U.S. and/or other countries. upgraded and/or separately purchased entire unused product (hardware and software)
Lync, Office 365, Skype, and Windows are hardware, drivers, software or BIOS update to within 14 days for a full refund subject to the
either registered trademarks or trademarks of take full advantage of Windows functionality. refund policy of your seller.
Microsoft Corporation in the United States Windows 10 is automatically updated, which is
and/or other countries. always enabled. ISP fees may apply and For any further information or to request a full
additional requirements may apply over time refund of the price of the computer, please
The information contained herein is subject to for updates. See http://www.microsoft.com. contact your seller.
change without notice. The only warranties for
HP products and services are set forth in the To access the latest user guides, go to
express warranty statements accompanying http://www.hp.com/support, and follow the
such products and services. Nothing herein instructions to find your product. Then select
should be construed as constituting an User Guides.
additional warranty. HP shall not be liable for
technical or editorial errors or omissions
contained herein.
First Edition: July 2019
Document Part Number: L58962-001

Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the
computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat
surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as
pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to come into contact with the
skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter
comply with the user-accessible surface temperature limits defined by applicable safety standards.
iii
iv Safety warning notice
Processor configuration setting (select products only)
IMPORTANT: Select computer products are configured with an Intel® Pentium® N35xx/N37xx series or a
Celeron® N28xx/N29xx/N30xx/N31xx series processor and a Windows® operating system. If your computer
is configured as described, do not change the processor configuration setting in msconfig.exe from 4 or 2
processors to 1 processor. If you do so, your computer will not restart. You will have to perform a factory
reset to restore the original settings.
v
vi Processor configuration setting (select products only)
Table of contents
1 Getting started ............................................................................................................................................. 1

Finding information ............................................................................................................................................... 2
2 Components .................................................................................................................................................. 3
Locating hardware ................................................................................................................................................. 3
Locating software .................................................................................................................................................. 3
Right ....................................................................................................................................................................... 3
Left ......................................................................................................................................................................... 5
Display .................................................................................................................................................................... 6
Keyboard area ........................................................................................................................................................ 7
Touchpad ............................................................................................................................................. 7
Lights ................................................................................................................................................... 8
Button, speakers, and fingerprint reader ......................................................................................... 10
Shortcut keys ..................................................................................................................................... 11
Hot keys (select products only) ......................................................................................................... 12
Icon keys ............................................................................................................................................ 12
Bottom ................................................................................................................................................................. 14
Cover .................................................................................................................................................................... 15
Labels ................................................................................................................................................................... 16
3 Network connections ................................................................................................................................... 18

Connecting to a wireless network ....................................................................................................................... 18
Using the wireless controls ............................................................................................................... 18
Wireless button ............................................................................................................... 18
Operating system controls ............................................................................................. 18
Connecting to a WLAN ....................................................................................................................... 19
Using HP Mobile Broadband (select products only) .......................................................................... 19
Using GPS (select products only) ...................................................................................................... 20
Using Bluetooth wireless devices (select products only) ................................................................. 20
Connecting Bluetooth devices ........................................................................................ 20
Using NFC to share information (select products only) .................................................................... 20
Sharing ............................................................................................................................ 21
Connecting to a wired network ............................................................................................................................ 21
Connecting to a local area network (LAN) (select products only) .................................................... 21
Using HP LAN-Wireless Protection (select products only) ................................................................ 22
Turning on and customizing HP LAN-Wireless Protection ............................................. 22
vii
Using HP MAC Address Pass Through to identify your computer on a network (select products only) ............. 23
Customizing MAC Address Pass Through .......................................................................................... 23
4 Navigating the screen .................................................................................................................................. 24

Using Touchpad and touch screen gestures ........................................................................................................ 24
Tap ..................................................................................................................................................... 24
Two-finger pinch zoom ..................................................................................................................... 25
Two-finger slide (Touchpad and precision touchpad) ...................................................................... 25
Two-finger tap (Touchpad and precision touchpad) ......................................................................... 25
Three-finger tap (Touchpad and precision touchpad) ...................................................................... 26
Four-finger tap (Touchpad and precision touchpad) ........................................................................ 26
Three-finger swipe (Touchpad and precision touchpad) .................................................................. 27
Four-finger swipe (precision touchpad) ............................................................................................ 27
One-finger slide (touch screen) ......................................................................................................... 28
Using an optional keyboard or mouse ................................................................................................................. 28
Using an on-screen keyboard (select products only) .......................................................................................... 28
5 Entertainment features ............................................................................................................................... 29

Using a camera (select products only) ................................................................................................................ 29
Using audio .......................................................................................................................................................... 29
Connecting speakers ......................................................................................................................... 29
Connecting headphones .................................................................................................................... 29
Connecting headsets ......................................................................................................................... 30
Using sound settings ......................................................................................................................... 30
Using video .......................................................................................................................................................... 30
Connecting a Thunderbolt device using a USB Type-C cable (select products only) ....................... 31
Connecting video devices using an HDMI cable (select products only) ............................................ 32
Setting up HDMI audio .................................................................................................... 32
Discovering and connecting wired displays using MultiStream Transport ...................................... 33
Connect displays to computers with AMD or Nvidia graphics (with an optional hub) ... 33
Connect displays to computers with Intel graphics (with an optional hub) ................... 33
Discovering and connecting to Miracast-compatible wireless displays (select products only) ...... 34
Discovering and connecting to Intel WiDi certified displays (select Intel products only) ................ 34
Using data transfer .............................................................................................................................................. 34
Connecting devices to a USB Type-C port (select products only) ..................................................... 35
6 Managing power .......................................................................................................................................... 36

Using Sleep and Hibernation ............................................................................................................................... 36
Initiating and exiting Sleep ............................................................................................................... 36
Initiating and exiting Hibernation (select products only) ................................................................. 37
viii
Shutting down (turning off) the computer .......................................................................................................... 37
Using the Power icon and Power Options ............................................................................................................ 38
Running on battery power ................................................................................................................................... 38
Using HP Fast Charge (select products only) .................................................................................... 38
Displaying battery charge ................................................................................................................. 39
Finding battery information in HP Support Assistant (select products only) .................................. 39
Conserving battery power ................................................................................................................. 39
Identifying low battery levels ........................................................................................................... 39
Resolving a low battery level ............................................................................................................ 40
Resolving a low battery level when external power is available ................................... 40
Resolving a low battery level when no power source is available ................................. 40
Resolving a low battery level when the computer cannot exit Hibernation .................. 40
Factory-sealed battery ...................................................................................................................... 40
Running on external power ................................................................................................................................. 40
7 Security ...................................................................................................................................................... 42
Protecting the computer ..................................................................................................................................... 42
Using passwords .................................................................................................................................................. 42
Setting passwords in Windows ......................................................................................................... 43
Setting passwords in Computer Setup ............................................................................................. 43
Managing a BIOS administrator password ........................................................................................ 44
Entering a BIOS administrator password ....................................................................... 45
Using DriveLock Security Options ..................................................................................................... 45
Selecting Automatic DriveLock (select products only) ................................................... 46
Enabling Automatic DriveLock ..................................................................... 46
Disabling Automatic DriveLock .................................................................... 46
Entering an Automatic DriveLock password ................................................ 47
Selecting manual DriveLock ........................................................................................... 47
Setting a DriveLock master password ......................................................... 47
Enabling DriveLock and setting a DriveLock user password ......................................... 48
Disabling DriveLock ........................................................................................................ 49
Entering a DriveLock password ...................................................................................... 49
Changing a DriveLock password ..................................................................................... 49
Windows Hello (select products only) ................................................................................................................. 50
Using antivirus software ...................................................................................................................................... 50
Using firewall software ........................................................................................................................................ 50
Installing software updates ................................................................................................................................. 51
Using HP Client Security (select products only) .................................................................................................. 51
Using HP Device as a Service (select products only) ........................................................................................... 51
Using an optional security cable (select products only) ..................................................................................... 51
Using a fingerprint reader (select products only) ............................................................................................... 51
ix
Locating the fingerprint reader ......................................................................................................... 52
8 Maintenance ............................................................................................................................................... 53
Improving performance ....................................................................................................................................... 53
Using Disk Defragmenter .................................................................................................................. 53
Using Disk Cleanup ............................................................................................................................ 53
Using HP 3D DriveGuard (select products only) ................................................................................ 54
Identifying HP 3D DriveGuard status .............................................................................. 54
Updating programs and drivers .......................................................................................................................... 54
Cleaning your computer ...................................................................................................................................... 54
Cleaning procedures .......................................................................................................................... 55
Cleaning the display ........................................................................................................ 55
Cleaning the sides or cover ............................................................................................. 55
Cleaning the TouchPad, keyboard, or mouse (select products only) ............................. 55
Traveling with or shipping your computer .......................................................................................................... 55
9 Backing up, restoring, and recovering ........................................................................................................... 57

Backing up information and creating recovery media ........................................................................................ 57
Using Windows tools ......................................................................................................................... 57
Using the HP Cloud Recovery Download Tool to create recovery media (select products only) ..... 57
Restoring and recovery ........................................................................................................................................ 58
Restoring, resetting, and refreshing using Windows tools .............................................................. 58
Recovering using HP Recovery media ............................................................................................... 58
Changing the computer boot order ................................................................................................... 58
10 Computer Setup (BIOS), TPM, and HP Sure Start ............................................................................................ 59

Using Computer Setup ......................................................................................................................................... 59
Starting Computer Setup .................................................................................................................. 59
Navigating and selecting in Computer Setup ................................................................................... 59
Restoring factory settings in Computer Setup ................................................................................. 59
Updating the BIOS ............................................................................................................................. 60
Determining the BIOS version ......................................................................................... 60
Downloading a BIOS update ........................................................................................... 60
Changing the boot order using the f9 prompt .................................................................................. 61
TPM BIOS settings (select products only) ........................................................................................................... 61
Using HP Sure Start (select products only) ......................................................................................................... 62
11 Using HP PC Hardware Diagnostics .............................................................................................................. 63

Using HP PC Hardware Diagnostics Windows (select products only) ................................................................. 63
Downloading HP PC Hardware Diagnostics Windows ....................................................................... 63
x
Downloading the latest HP PC Hardware Diagnostics Windows version ....................... 64
Downloading HP Hardware Diagnostics Windows by product name or number
(select products only) ..................................................................................................... 64
Installing HP PC Hardware Diagnostics Windows ............................................................................. 64
Using HP PC Hardware Diagnostics UEFI ............................................................................................................. 64
Starting HP PC Hardware Diagnostics UEFI ....................................................................................... 65
Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive .............................................. 65
Downloading the latest HP PC Hardware Diagnostics UEFI version .............................. 65
Downloading HP PC Hardware Diagnostics UEFI by product name or number
(select products only) ..................................................................................................... 65
Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) ............................................. 66
Downloading Remote HP PC Hardware Diagnostics UEFI ................................................................. 66
Downloading the latest Remote HP PC Hardware Diagnostics UEFI version ................. 66
Downloading Remote HP PC Hardware Diagnostics UEFI by product name or
number ............................................................................................................................ 66
Customizing Remote HP PC Hardware Diagnostics UEFI settings .................................................... 66
12 Specifications ............................................................................................................................................ 68
Input power .......................................................................................................................................................... 68
Operating environment ....................................................................................................................................... 69
13 Electrostatic discharge ............................................................................................................................... 70
14 Accessibility .............................................................................................................................................. 71
Accessibility ......................................................................................................................................................... 71
Finding the technology tools you need ............................................................................................ 71
Our commitment ............................................................................................................................... 71
International Association of Accessibility Professionals (IAAP) ....................................................... 71
Finding the best assistive technology .............................................................................................. 72
Assessing your needs ..................................................................................................... 72
Accessibility for HP products .......................................................................................... 72
Standards and legislation .................................................................................................................................... 73
Standards .......................................................................................................................................... 73
Mandate 376 – EN 301 549 ............................................................................................ 73
Web Content Accessibility Guidelines (WCAG) ................................................................ 73
Legislation and regulations .............................................................................................................. 73
United States ................................................................................................................... 74
21st Century Communications and Video Accessibility Act (CVAA) ............................... 74
Canada ............................................................................................................................. 74
Europe ............................................................................................................................. 75
United Kingdom .............................................................................................................. 75
xi
Australia .......................................................................................................................... 75
Worldwide ....................................................................................................................... 75
Useful accessibility resources and links .............................................................................................................. 76
Organizations .................................................................................................................................... 76
Educational institutions .................................................................................................................... 76
Other disability resources ................................................................................................................. 76
HP links .............................................................................................................................................. 76
Contacting support .............................................................................................................................................. 77
Index ............................................................................................................................................................. 78
xii
1 Getting started
After you set up and register the computer, we recommend the following steps to get the most out of your
smart investment:
TIP: To quickly return to the computer Start screen from an open app or the Windows desktop, press the
Windows key on your keyboard. Pressing the Windows key again will return you to the previous screen.
● Connect to the Internet—Set up your wired or wireless network so that you can connect to the Internet.
For more information, see Network connections on page 18.
● Update your antivirus software—Protect your computer from damage caused by viruses. The software
is preinstalled on the computer. For more information, see Using antivirus software on page 50.
● Get to know your computer—Learn about your computer features. See Components on page 3 and
Navigating the screen on page 24 for additional information.
● Find installed software—Access a list of the software preinstalled on the computer:
Select the Start button.
‒ or –
Right-click the Start button, and then select Apps and Features.
● Back up your hard drive—Create recovery discs or a recovery USB flash drive to back up your hard drive.
See Backing up, restoring, and recovering on page 57.
1
Finding information
To locate resources that provide product details, how-to information, and more, use this table.
Table 1-1 Additional information
Resource Contents
Setup Instructions ● Overview of computer setup and features
HP support ● Online chat with an HP technician
For HP support, go to http://www.hp.com/support, and ● Support telephone numbers

follow the instructions to find your product.
● Replacement parts videos (select products only)
● Maintenance and service guides
● HP service center locations
Safety & Comfort Guide ● Proper workstation setup
To access this guide: ● Guidelines for posture and work habits that increase your comfort
and decrease your risk of injury
▲ Select the Start button, select HP Help and Support,
and then select HP Documentation. ● Electrical and mechanical safety information
‒ or –
▲ Go to http://www.hp.com/ergo.
IMPORTANT: You must be connected to the Internet

to access the latest version of the user guide.
Regulatory, Safety and Environmental Notices ● Important regulatory notices, including information about proper
battery disposal, if needed.
To access this document:

and then select HP Documentation.
Limited Warranty* ● Specific warranty information about this computer
To access this document:

and then select HP Documentation.
‒ or –
▲ Go to http://www.hp.com/go/orderdocuments.
IMPORTANT: You must be connected to the Internet

to access the latest version of the user guide.
*You can find your HP Limited Warranty located with the user guides on your product and/or on the CD or DVD provided in the box. In
some countries or regions, HP may provide a printed warranty in the box. For countries or regions where the warranty is not provided
in printed format, you can request a copy from http://www.hp.com/go/orderdocuments. For products purchased in Asia Pacific, you
can write to HP at POD, PO Box 161, Kitchener Road Post Office, Singapore 912006. Include your product name, and your name, phone
number, and postal address.
2 Chapter 1 Getting started

2 Components
Your computer features top-rated components. This chapter provides details about your components, where
they are located, and how they work.
Locating hardware
To find out what hardware is installed on your computer:
▲ Type device manager in the taskbar search box, and then select the Device Manager app.
A list displays all the devices installed on your computer.

For information about system hardware components and the system BIOS version number, press fn+esc
(select products only).
Locating software
To find out what software is installed on your computer:
▲ Right-click the Start button, and then select Apps and Features.
Right
Table 2-1 Right-side components and their descriptions

Component Description
(1) Smart card reader Supports optional smart cards.
(2) Audio-out (headphone)/Audio-in (microphone) Connects optional powered stereo speakers, headphones,
combo jack earbuds, a headset, or a television audio cable. Also connects an
optional headset microphone. This jack does not support
optional standalone microphones.
Locating hardware 3
Table 2-1 Right-side components and their descriptions (continued)
WARNING! To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.
For additional safety information, see the Regulatory, Safety,
and Environmental Notices.
To access this guide:
● Select the Start button, select HP Help and Support, and

then select HP Documentation.
NOTE: When a device is connected to the jack, the computer
speakers are disabled.
(3) USB SuperSpeed port Connects a USB device, such as a cell phone, camera, activity
tracker, or smartwatch, and provides high-speed data transfer.
(4) HDMI port Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio
component, or a high-speed High Definition Multimedia
Interface (HDMI) device.
(5) USB Type-C power connector and Connect an AC adapter that has a USB Type-C connector,
Thunderbolt™ ports with HP Sleep and Charge supplying power to the computer and, if needed, charging the
(2) computer battery.
– and –
Even when the computer is off, connect and charge most USB
devices that have a Type-C connector, such as a cell phone,
camera, activity tracker, or smartwatch, and provide high-speed
data transfer.
– and –
Connect a display device that has a USB Type-C connector,

providing DisplayPort output.
NOTE: Your computer may also support a Thunderbolt

docking station.
NOTE: Cables and/or adapters (purchased separately) may be

required.
(6) Power connector Connects an AC adapter.
(7) Battery light When AC power is connected:
● White: The battery charge is greater than 90 percent.
● Amber: The battery charge is from 0 to 90 percent.
● Off: The battery is not charging.
When AC power is disconnected (battery not charging):
● Blinking amber: The battery has reached a low battery

level. When the battery has reached a critical battery level,
the battery light begins blinking rapidly.
● Off: The battery is not charging.
4 Chapter 2 Components
Left
Table 2-2 Left-side components and their descriptions
(1) Security cable slot Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent, but

it may not prevent the computer from being mishandled or
stolen.
(2) RJ-45 (network) jack/status lights Connects a network cable.
● Green (left): The network is connected.
● Amber (right): Activity is occurring on the network.
(3) USB SuperSpeed port with HP Sleep and Charge Connects a USB device, provides high-speed data transfer, and
even when the computer is off, charges most products such as a
cell phone, camera, activity tracker, or smartwatch.
(4) USB SuperSpeed port Connects a USB device, such as a cell phone, camera, activity
tracker, or smartwatch, and provides high-speed data transfer.
(5) Memory card reader Reads optional memory cards that store, manage, share, or
access information.
To insert a card:
1. Hold the card label-side up, with the connectors facing the
computer.
2. Insert the card into the memory card reader, and then
press in on the card until it is firmly seated.
To remove a card:
▲ Press in on the card, and then remove it from the memory

card reader.
Left 5
Display
NOTE: Refer to the illustration that most closely resembles your computer.
Table 2-3 Display components and their descriptions
(1) WLAN antennas* Send and receive wireless signals to communicate with wireless local
area networks (WLANs).
(2) WWAN antennas* Send and receive wireless signals to communicate with wireless wide
area networks (WWANs).
(3) Camera(s) (select products only) Allow(s) you to video chat, record video, and record still images. To
use your camera, see Using a camera (select products only)
on page 29. Some cameras also allow a facial recognition logon to
Windows, instead of a password logon. For more information, see
Windows Hello (select products only) on page 50.
NOTE: Camera functions vary depending on the camera hardware

and software installed on your product.
(4) Internal microphones (2) Record sound.
(5) Camera light (select products only) On: The camera is in use.
(6) Camera privacy shutter (select products only) When closed, the camera privacy shutter blocks the camera.
● To unblock the camera, slide the shutter to the right.
● To block the camera, slide the shutter to the left.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.
▲ Select the Start button, select HP Help and Support, and then select HP Documentation.
Keyboard area
Touchpad
Touchpad settings
To adjust Touchpad settings and gestures, or to turn off the Touchpad:

1. Type Touchpad settings in the taskbar search box, and press enter.
2. Choose a setting.
To turn on the Touchpad:
1. Type Touchpad settings in the taskbar search box, and press enter.
2. Using an external mouse, click the Touchpad button.

– or –
Press the Tab key repeatedly until the pointer rests on the Touchpad button. Then press the spacebar to
select the button.
Table 2-4 Touchpad components and their descriptions

(1) Pointing stick Moves the pointer on the screen.
(2) Left pointing stick button Functions like the left button on an external mouse.
(3) Center pointing stick button Functions like the center button on an external mouse.
(4) Touchpad zone Reads your finger gestures to move the pointer or activate items
on the screen.
(5) Center Touchpad button Functions like the center button on an external mouse.
(6) Left Touchpad button Functions like the left button on an external mouse.
Keyboard area 7
Table 2-4 Touchpad components and their descriptions (continued)
(7) Right pointing stick button Functions like the right button on an external mouse.
(8) HP DreamColor sensor (select products only) A colorimeter that brings integrated color calibration to your
display. This built-in measurement instrument provides the ability
to recalibrate a DreamColor color preset without the use of an
external measurement instrument. To select a color preset or
launch the calibration tool, select the HP DreamColor icon in the
Windows taskbar. Make a selection from the menu and follow the
on-screen instructions.
NOTE: For accurate calibration, keep the sensor window clean

and free from obstructions.
(9) Near Field Communications (NFC) tapping area and Allows you to wirelessly share information when you tap it with an
antenna* NFC-enabled device.
(10) Right Touchpad button Functions like the right button on an external mouse.
*The antenna is not visible from the outside of the computer. For optimal transmission, keep the area immediately around the antenna
free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.
Lights
Table 2-5 Lights and their descriptions
(1) Power light ● On: The computer is on.
● Blinking: The computer is in the Sleep state, a power-saving

state. The computer shuts off power to the display and
other unneeded components.
● Off: The computer is off.
(2) Caps lock light On: Caps lock is on, which switches the key input to all capital
letters.
(3) Fn lock light On: The fn key is locked. For more information, see Hot keys
(select products only) on page 12.
(4) Mute light ● On: Computer sound is off.
● Off: Computer sound is on.
(5) Microphone mute light ● On: Microphone is off.
● Off: Microphone is on.
(6) Wireless light On: An integrated wireless device, such as a wireless local area
network (WLAN) device and/or a Bluetooth® device, is on.
NOTE: On some models, the wireless light is amber when all

wireless devices are off.
(7) Sharing or presenting light On: Sharing is on.
(8) Call answer light On: Call answer is on.
(9) Call end light On: Call end is on.
(10) Num lk light On: Num lock is on.
Keyboard area 9
Button, speakers, and fingerprint reader
Table 2-6 Button, speakers, and fingerprint reader and their descriptions
(1) Power button ● When the computer is off, press the button to turn on the
computer.
● When the computer is on, press the button briefly to initiate

Sleep.
● When the computer is in the Sleep state, press the button

briefly to exit Sleep (select products only).
CAUTION: Pressing and holding down the power button results

in the loss of unsaved information.
If the computer has stopped responding and shutdown

procedures are ineffective, press and hold the power button for at
least 5 seconds to turn off the computer.
To learn more about your power settings, see your power

options.
▲ Right-click the Power meter icon and then select
Power Options.
(2) Speakers (2) Produce sound.
(3) Fingerprint reader (select products only) Allows a fingerprint logon to Windows, instead of a password
logon.
▲ Touch your finger to the fingerprint reader. See Windows

Hello (select products only) on page 50 for details.
IMPORTANT: To prevent fingerprint logon issues, make

sure when you register your fingerprint that all sides of your
finger are registered by the fingerprint reader.
Table 2-6 Button, speakers, and fingerprint reader and their descriptions (continued)
IMPORTANT: To verify that your computer has a fingerprint

reader, type Sign-in options in the taskbar search box and
follow the on-screen instructions. If Fingerprint reader is listed as
an option, then your computer includes a fingerprint reader.
Shortcut keys
Table 2-7 Shortcut keys and their descriptions
(1) esc key Displays system information when pressed in combination with
the fn key.
(2) fn key Executes frequently used system functions when pressed in

combination with another key. Such key combinations are called
hot keys.
See Hot keys (select products only) on page 12.
(3) Windows key Opens the Start menu.
NOTE: Pressing the Windows key again closes the Start menu.
(4) Icon keys Execute frequently used system functions.
See Icon keys on page 12.
(5) num lk key Alternates between the navigational and numeric functions on
the integrated numeric keypad.
(6) Integrated numeric keypad A separate keypad to the right of the alphabet keyboard. When
num lk is pressed, the integrated keypad can be used like an
external numeric keypad.
NOTE: If the keypad function is active when the computer is

turned off, that function is reinstated when the computer is
turned back on.
Keyboard area 11
Hot keys (select products only)
A hot key is the combination of the fn key and another key.
To use a hot key:
▲ Press the fn key, and then press one of the keys listed in the following table.
Table 2-8 Hot keys and their descriptions
Key Description
C Turns on scroll lock.
E Turns on the insert function.
R Breaks the operation.
S Sends a programing query.
W Pauses the operation.
Icon keys
The icon keys on your keyboard perform functions and vary by computer. To determine the function of an icon
key, match the icon to the description in this table.
▲ To use an icon key, press and hold the key.
NOTE: Some products require that you press the icon key in combination with the fn key to perform
the described function.
Table 2-9 Icon keys and their descriptions

Icon Description
Helps prevent side-angle viewing from onlookers. If needed, decrease or increase brightness for well-
lit or darker environments. Press the key again to turn off the privacy screen.
NOTE: To quickly turn on the highest privacy setting, press fn+p.
Decreases the screen brightness incrementally as long as you hold down the key.
Increases the screen brightness incrementally as long as you hold down the key.
Turns the keyboard backlight off or on. On select products, you can adjust the brightness of the
keyboard backlight. Press the key repeatedly to adjust the brightness from high (when you first start
up the computer), to low, to off. After you adjust the keyboard backlight setting, the backlight will
revert to your previous setting each time you turn on the computer. The keyboard backlight will turn
off after 30 seconds of inactivity. To turn the keyboard backlight back on, press any key or tap the
Touchpad (select products only). To conserve battery power, turn off this feature.
Table 2-9 Icon keys and their descriptions (continued)
Icon Description
Plays the previous track of an audio CD or the previous section of a DVD or a Blu-ray Disc (BD).
Starts, pauses, or resumes playback of an audio CD, a DVD, or a BD.
Plays the next track of an audio CD or the next section of a DVD or a BD.
Stops audio or video playback of a CD, a DVD, or a BD.
Decreases speaker volume incrementally while you hold down the key.
Increases speaker volume incrementally while you hold down the key.
Mutes the microphone.
Mutes or restores speaker sound.
Turns the wireless feature on or off.
NOTE: A wireless network must be set up before a wireless connection is possible.
Turns the Touchpad and Touchpad light on and off.
Switches the screen image among display devices connected to the system. For example, if a monitor
is connected to the computer, repeatedly pressing the key alternates the screen image from computer
display to monitor display to simultaneous display on both the computer and the monitor.
Initiates Sleep, which saves your information in system memory. The display and other system
components turn off and power is conserved. To exit Sleep, briefly press the power button.
CAUTION: To reduce the risk of information loss, save your work before initiating Sleep.
Provides quick access to your Skype for Business calendar.
NOTE: This feature requires Skype® for Business or Lync® 2013 running on Microsoft Exchange or
Office 365® servers.
Turns the screen sharing function on or off.
NOTE: This feature requires Skype® for Business or Lync® 2013 running on Microsoft Exchange or
Office 365® servers.
● Answers a call.
● Starts a call during a 1-on-1 chat.
● Places a call on hold.
Keyboard area 13
Table 2-9 Icon keys and their descriptions (continued)
Icon Description
NOTE: This feature requires Skype for Business or Lync 2013 running on Microsoft Exchange or
Office 365 servers.
● Ends a call.
● Declines incoming calls.
● Ends screen sharing.
NOTE: This feature requires Skype for Business or Lync 2013 running on Microsoft Exchange or
Office 365 servers.
NOTE: The icon key feature is enabled at the factory. You can disable this feature by pressing and holding
the fn key and the left shift key. The fn lock light will turn on. After you have disabled the icon key feature, you
can still perform each function by pressing the fn key in combination with the appropriate icon key.
Bottom
Table 2-10 Bottom components and their descriptions

(1) Vent Enables airflow to cool internal components.
Table 2-10 Bottom components and their descriptions (continued)
NOTE: The computer fan starts up automatically to

cool internal components and prevent overheating. It
is normal for the internal fan to cycle on and off during
routine operation.
(2) Service door release latch and security Releases the service door after you remove the
screw security screw.
Cover
Table 2-11 Cover components and their descriptions
Internal Microphones (2) Record sound.
Cover 15
Labels
The labels affixed to the computer provide information you may need when you troubleshoot system
problems or travel internationally with the computer. Labels may be in paper form or imprinted on the
product.
IMPORTANT: Check the following locations for the labels described in this section: the bottom of the
computer, inside the battery bay, under the service door, on the back of the display, or on the bottom of a
tablet kickstand.
● Service label—Provides important information to identify your computer. When contacting support, you
may be asked for the serial number, the product number, or the model number. Locate this information
before you contact support.
Your service label will resemble one of the examples shown below. Refer to the illustration that most
closely matches the service label on your computer.
Table 2-12 Service label components
Component
(1) HP product name
(2) Model number
(3) Product ID
(4) Serial number
(5) Warranty period
Table 2-13 Service label components

Component
(1) HP product name
(2) Product ID
Table 2-13 Service label components (continued)
Component
(3) Serial number
(4) Warranty period
● Regulatory label(s)—Provide(s) regulatory information about the computer.

● Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval
markings for the countries or regions in which the devices have been approved for use.
Labels 17
3 Network connections
Your computer can travel with you wherever you go. But even at home, you can explore the globe and access
information from millions of websites by using your computer and a wired or wireless network connection.
This chapter will help you get connected to that world.
Connecting to a wireless network

Your computer may be equipped with one or more of the following wireless devices:
● WLAN device—Connects the computer to wireless local area networks (commonly referred to as Wi-Fi
networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports,
restaurants, coffee shops, hotels, and universities. In a WLAN, the mobile wireless device in your
computer communicates with a wireless router or a wireless access point.
● HP Mobile Broadband Module (select products only)—A wireless wide area network (WWAN) device that
gives you wireless connectivity over a much larger area. Mobile network operators install base stations
(similar to cell phone towers) throughout large geographic areas, effectively providing coverage across
entire states, regions, or even countries.
● Bluetooth® device—Creates a personal area network (PAN) to connect to other Bluetooth-enabled
devices such as computers, phones, printers, headsets, speakers, and cameras. In a PAN, each device
communicates directly with other devices, and devices must be relatively close together—typically
within 10 meters (approximately 33 feet) of each other.
Using the wireless controls

You can control the wireless devices in your computer using one or more of these features:
● Wireless button (also called airplane mode key or wireless key) (referred to in this chapter as wireless
button)
● Operating system controls
Wireless button
The computer may have a wireless button, one or more wireless devices, and one or two wireless lights. All
the wireless devices on your computer are enabled at the factory.
The wireless light indicates the overall power state of your wireless devices, not the status of individual
devices.
Operating system controls

The Network and Sharing Center allows you to set up a connection or network, connect to a network, and
diagnose and repair network problems.
To use operating system controls:
1. Type control panel in the taskbar search box, and then select Control Panel.
2. Select Network and Internet, and then select Network and Sharing Center.
‒ or –
18 Chapter 3 Network connections

▲ On the taskbar, select the network status icon, and then select Network & Internet settings.
Connecting to a WLAN
NOTE: When you are setting up Internet access in your home, you must establish an account with an
Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The ISP will
help set up the modem, install a network cable to connect your wireless router to the modem, and test the
Internet service.
To connect to a WLAN, follow these steps:

1. Be sure that the WLAN device is on.
2. On the taskbar, select the network status icon, and then connect to one of the available networks.
If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Enter the code, and
then select Next to complete the connection.
NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.
NOTE: If you do not see the WLAN you want to connect to:
1. On the taskbar, right-click the network status icon, and then select Open Network & Internet
settings.
‒ or –
On the taskbar, select the network status icon, and then select Network & Internet settings.
2. Under the Change your network settings section, select Network and Sharing Center.
3. Select Set up a new connection or network.
A list of options is displayed, allowing you to manually search for and connect to a network or to
create a new network connection.
3. Follow the on-screen instructions to complete the connection.

After the connection is made, select the network status icon at the far right of the taskbar, to verify the name
and status of the connection.
NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router
manufacturer, and interference from other electronic devices or structural barriers such as walls and floors.
Using HP Mobile Broadband (select products only)

Your HP Mobile Broadband computer has built-in support for mobile broadband service. Your new computer,
when used with a mobile operator’s network, gives you the freedom to connect to the Internet, send e-mail,
or connect to your corporate network without the need for Wi-Fi hotspots.
You might need the HP Mobile Broadband Module IMEI and/or MEID number to activate mobile broadband
service. The number may be printed on a label located on the bottom of your computer, inside the battery bay,
under the service door, or on the back of the display.
‒ or –
1. On the taskbar, select the network status icon.
2. Select Network & Internet settings.
3. Under the Network & Internet section, select Cellular, and then select Advanced Options.
Connecting to a wireless network 19

Some mobile network operators require the use of a SIM card. A SIM card contains basic information about
you, such as a personal identification number (PIN), as well as network information. Some computers include
a SIM card that is preinstalled. If the SIM card is not preinstalled, it may be provided in the HP Mobile
Broadband information provided with your computer or the mobile network operator may provide it
separately from the computer.
For information about HP Mobile Broadband and how to activate service with a preferred mobile network
operator, see the HP Mobile Broadband information included with your computer.
Using GPS (select products only)

Your computer may be equipped with a Global Positioning System (GPS) device. GPS satellites deliver location,
speed, and direction information to GPS-equipped systems.
To enable GPS, make sure location is enabled under the Windows privacy setting.
1. Type location in the taskbar search box, and then select Location privacy settings.
2. Follow the on-screen instructions for using location settings.
Using Bluetooth wireless devices (select products only)

A Bluetooth device provides short-range wireless communications that replace the physical cable connections
that traditionally link electronic devices such as the following:
● Computers (desktop, notebook)
● Phones (cellular, cordless, smartphone)
● Imaging devices (printer, camera)
● Audio devices (headset, speakers)
● Mouse
● External keyboard
Connecting Bluetooth devices

Before you can use a Bluetooth device, you must establish a Bluetooth connection.
1. Type bluetooth in the taskbar search box, and then select Bluetooth and other devices settings.
2. Turn on Bluetooth, if it is not already turned on.

3. Select Add Bluetooth or other device, and then in the Add a device dialog box, select Bluetooth.
4. Select your device from the list, and then follow the on-screen instructions.
NOTE: If the device requires verification, a pairing code is displayed. On the device you are adding, follow the
on-screen instructions to verify that the code on your device matches the pairing code. For more information,
refer to the documentation provided with the device.
NOTE: If your device does not appear in the list, be sure that Bluetooth on that device is turned on. Some
devices may have additional requirements; refer to the documentation provided with the device.
Using NFC to share information (select products only)

Your computer supports Near Field Communication (NFC), which allows you to wirelessly share information
between two NFC-enabled devices. Information is transferred by tapping the tapping area (antenna) of the

computer with the antenna of your phone or other device. With NFC and supported apps, you can share
websites, transfer contact information, transfer payments, and print on NFC-enabled printers.
NOTE: To locate the tapping area on your computer, see Components on page 3.
Sharing
1. Confirm that the NFC function is enabled.
a. Type wireless in the taskbar search box, and then select Turn wireless devices on or off.
b. Confirm that the selection for NFC is On.

2. Tap the NFC tapping area with an NFC-enabled device. You may hear a sound when the devices connect.
NOTE: To find the location of the antenna on the other NFC device, refer to your device instructions.
3. Follow any on-screen instructions to continue.
Connecting to a wired network

Select products may allow wired connections: local area network (LAN) and modem connection. A LAN
connection uses a network cable and is much faster than a modem, which uses a telephone cable. Both cables
are sold separately.
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem
cable or telephone cable into an RJ-45 (network) jack.
Connecting to a local area network (LAN) (select products only)

Use a LAN connection if you want to connect the computer directly to a router in your home (instead of
working wirelessly), or if you want to connect to an existing network at your office.
NOTE: A feature called HP LAN-Wireless Protection may be enabled on your computer. It closes your
wireless (Wi-Fi) or WWAN connection when you connect directly to a LAN. For more information about HP LAN-
Wireless Protection, see Using HP LAN-Wireless Protection (select products only) on page 22.
If there is no RJ-45 port on the computer, connecting to a LAN requires an 8-pin, RJ-45 network cable or an
optional docking device or expansion product.
To connect the network cable, follow these steps:
1. Plug the network cable into the network jack (1) on the computer or on an optional docking device or
expansion product.
Connecting to a wired network 21

2. Plug the other end of the network cable into a network wall jack (2) or router.
NOTE: If the network cable contains noise suppression circuitry (3), which prevents interference from
TV and radio reception, orient the circuitry end of the cable toward the computer.
Using HP LAN-Wireless Protection (select products only)

In a LAN environment, you can set HP LAN-Wireless Protection to safeguard your LAN network from
unauthorized wireless access. When HP LAN-Wireless Protection is enabled, the WLAN (Wi-Fi) or WWAN
connection is turned off when the computer is connected directly to a LAN.
Turning on and customizing HP LAN-Wireless Protection

1. Connect a network cable to the network jack on the computer, or on an optional docking device or
expansion product.
2. Start Computer Setup (BIOS).
● Computers or tablets with keyboards:
▲ Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer
Setup.
● Tablets without keyboards:
▲ Turn on or restart the tablet, and then quickly hold down the volume down button until the
Startup menu is displayed. Tap f10 to enter Computer Setup.
3. Select Advanced, and then select Built-in Device Options.
4. Select the check box for LAN/WLAN Auto Switching and/or LAN/WWAN Auto Switching to turn off WLAN
and/or WWAN connections when connected to a LAN network.
5. To save your changes and exit Computer Setup, select Main, select Save Changes and Exit, and then
select Yes.
NOTE: If you are using arrow keys to highlight your choice, you must then press enter.
Your changes go into effect when the computer restarts.

Using HP MAC Address Pass Through to identify your computer
on a network (select products only)
MAC Address Pass Through provides a customizable way of identifying your computer and its communications
on networks. This system MAC address provides unique identification even when your computer is connected
through an Ethernet adapter. This address is enabled by default.
Customizing MAC Address Pass Through

1. Start Computer Setup (BIOS).
Setup.
▲ Turn on or restart the tablet, and then quickly hold down the volume down button until the
Startup menu is displayed. Tap f10 to enter Computer Setup.
2. Select Advanced, and then select MAC Address Pass Through.
3. In the box to the right of Host Based MAC Address, select either System Address to enable MAC address
Pass Through or Custom Address to customize the address.
4. If you selected Custom, select MAC ADDRESS, enter your customized system MAC address, and then
press enter to save the address.
5. If the computer has an embedded LAN and you would like to use the embedded MAC address as the
system MAC address, select Reuse Embedded LAN Address.
‒ or –
Select Main, select Save Changes and Exit, and then select Yes.
Using HP MAC Address Pass Through to identify your computer on a network (select products only) 23
4 Navigating the screen
You can navigate the computer screen using one or more of the following methods:
● Use touch gestures directly on the computer screen.
● Use touch gestures on the Touchpad.
● Use an optional mouse or keyboard (purchased separately).
● Use an on-screen keyboard.
● Use a pointing stick.
Using Touchpad and touch screen gestures

The Touchpad helps you navigate the computer screen and control the pointer using simple touch gestures.
You can also use the left and right Touchpad buttons as you would use the corresponding buttons on an
external mouse. To navigate a touch screen (select products only), touch the screen directly using gestures
described in this chapter.
To customize gestures and see videos of how they work, type control panel in the taskbar search box,
select Control Panel, and then select Hardware and Sound. Under Devices and Printers, select Mouse.
Some products include a precision touchpad, which provides enhanced gesture functionality. To determine if
you have a precision touchpad and find additional information, select Start, select Settings, select Devices,
and then select Touchpad.
NOTE: Unless noted, gestures can be used on both the Touchpad and a touch screen.
Tap
Point to an item on the screen, and then tap one finger on the Touchpad zone or touch screen to select the
item. Double-tap an item to open it.
24 Chapter 4 Navigating the screen

Two-finger pinch zoom
Use the two-finger pinch zoom to zoom out or in on images or text.
● Zoom out by placing two fingers apart on the Touchpad zone or touch screen and then moving your
fingers together.
● Zoom in by placing two fingers together on the Touchpad zone or touch screen and then moving your
fingers apart.
Two-finger slide (Touchpad and precision touchpad)

Place two fingers slightly apart on the Touchpad zone and then drag them up, down, left, or right to move up,
down, or sideways on a page or image.
Two-finger tap (Touchpad and precision touchpad)

Tap two fingers on the Touchpad zone to open the options menu for the selected object.
NOTE: The two-finger tap performs the same function as right-clicking with a mouse.
Using Touchpad and touch screen gestures 25

Three-finger tap (Touchpad and precision touchpad)
By default, the three-finger tap opens Cortana, a voice-activated virtual assistant. Tap three fingers on the
Touchpad zone to perform the gesture.
To change the function of this gesture on a precision touchpad, select Start, select Settings, select Devices,
and then select Touchpad. Under Three-finger gestures, in the Taps box, select a gesture setting.
Four-finger tap (Touchpad and precision touchpad)

By default, the four-finger tap opens the Action Center. Tap four fingers on the Touchpad zone to perform the
gesture.
and then select Touchpad. Under Four-finger gestures, in the Taps box, select a gesture setting.

Three-finger swipe (Touchpad and precision touchpad)
By default, the three-finger swipe switches between open apps and the desktop.
● Swipe 3 fingers away from you to see all open windows.
● Swipe 3 fingers toward you to show the desktop.
● Swipe 3 fingers left or right to switch between open windows.
and then select Touchpad. Under Three-finger gestures, in the Swipes box, select a gesture setting.
Four-finger swipe (precision touchpad)

By default, the four-finger swipe switches between open desktops.
● Swipe 4 fingers away from you to see all open windows.
● Swipe 4 fingers toward you to show the desktop.
● Swipe 4 fingers left or right to switch between desktops.
To change the function of this gesture, select Start, select Settings, select Devices, and then select
Touchpad. Under Four-finger gestures, in the Swipes box, select a gesture setting.
Using Touchpad and touch screen gestures 27

One-finger slide (touch screen)
Use the one-finger slide to pan or scroll through lists and pages, or to move an object.
● To scroll across the screen, lightly slide one finger across the screen in the direction you want to move.
● To move an object, press and hold your finger on an object, and then drag your finger to move the object.
Using an optional keyboard or mouse

An optional keyboard or mouse allows you to type, select items, scroll, and perform the same functions as
you do using touch gestures. The keyboard also allows you to use Icon keys and hot keys to perform specific
functions.
Using an on-screen keyboard (select products only)

1. To display an on-screen keyboard, tap the keyboard icon in the notification area, at the far right of the
taskbar.
2. Begin typing.
NOTE: Suggested words may be displayed above the on-screen keyboard. Tap a word to select it.
NOTE: Icon keys and hot keys do not display or function on the on-screen keyboard.

5 Entertainment features
Use your HP computer for business or pleasure to meet with others via the camera, mix audio and video, or
connect external devices like a projector, monitor, TV, or speakers. See Components on page 3 to locate the
audio, video and camera features on your computer.
Using a camera (select products only)

Your computer has a camera (integrated camera) that records video and captures photographs. Some models
allow you to video conference and chat online using streaming video.
▲ To access the camera, type camera in the taskbar search box, and then select Camera from the list of
applications.
Using audio
You can download and listen to music, stream audio content (including radio) from the web, record audio, or
mix audio and video to create multimedia. You can also play music CDs on the computer (on select products)
or attach an external optical drive to play CDs. To enhance your listening enjoyment, attach headphones or
speakers.
Connecting speakers
You can attach wired speakers to your computer by connecting them to a USB port or to the audio-out
(headphone)/audio-in (microphone) combo jack on your computer or on a docking station.
To connect wireless speakers to your computer, follow the device manufacturer's instructions. To connect
high-definition speakers to the computer, see Setting up HDMI audio on page 32. Before connecting
speakers, lower the volume setting.
Connecting headphones
WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones,
earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental
Notices.
You can connect wired headphones to the headphone jack or to the audio-out (headphone)/audio-in
(microphone) combo jack on your computer.
To connect wireless headphones to your computer, follow the device manufacturer's instructions.
Using a camera (select products only) 29

Connecting headsets
WARNING! To reduce the risk of personal injury, lower the volume setting before putting on headphones,
earbuds, or a headset. For additional safety information, see the Regulatory, Safety and Environmental
Notices.
Headphones combined with a microphone are called headsets. You can connect wired headsets to the audio-
out (headphone)/audio-in (microphone) combo jack on your computer.
To connect wireless headsets to your computer, follow the device manufacturer's instructions.
Using sound settings

Use sound settings to adjust system volume, change system sounds, or manage audio devices.
To view or change sound settings:
▲ Type control panel in the taskbar search box, select Control Panel, select Hardware and Sound,
and then select Sound.
Your computer may include an enhanced sound system by Bang & Olufsen, DTS, Beats audio, or another
provider. As a result, your computer may include advanced audio features that can be controlled through an
audio control panel specific to your audio system.
Use the audio control panel to view and control audio settings.
▲ Type control panel in the taskbar search box, select Control Panel, select Hardware and Sound,
and then select the audio control panel specific to your system.
Using video
Your computer is a powerful video device that enables you to watch streaming video from your favorite
websites and download video and movies to watch on your computer when you are not connected to a
network.
To enhance your viewing enjoyment, use one of the video ports on the computer to connect an external
monitor, projector, or TV.
IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the
correct cable. Follow the device manufacturer's instructions.
For information about using your video features, refer to HP Support Assistant.
30 Chapter 5 Entertainment features

Connecting a Thunderbolt device using a USB Type-C cable (select products only)
NOTE: To connect a USB Type-C Thunderbolt™ device to your computer, you need a USB Type-C cable,
purchased separately.
To see video or high-resolution display output on an external Thunderbolt device, connect the Thunderbolt
device according to the following instructions:
1. Connect one end of the USB Type-C cable to the USB Type-C Thunderbolt port on the computer.
2. Connect the other end of the cable to the external Thunderbolt device.
3. Press f4 to cycle through four display states:
● PC screen only: View the screen image on the computer only.
● Duplicate: View the screen image simultaneously on both the computer and external device.
● Extend: View the screen image extended across both the computer and external device.
● Second screen only: View the screen image on the external device only.
Each time you press f4 the display state changes.
NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of
the external device, as follows. Select the Start button, select Settings, and then select System. Under
Display, select the appropriate resolution, and then select Keep changes.
Using video 31
Connecting video devices using an HDMI cable (select products only)
NOTE: To connect an HDMI device to your computer, you need an HDMI cable, purchased separately.
To see the computer screen image on a high-definition TV or monitor, connect the high-definition device
according to the following instructions:
1. Connect one end of the HDMI cable to the HDMI port on the computer.
2. Connect the other end of the cable to the high-definition TV or monitor.

3. Press f4 to cycle through four display states:
● PC screen only: View the screen image on the computer only.
● Duplicate: View the screen image simultaneously on both the computer and the external device.
● Extend: View the screen image extended across both the computer and the external device.
● Second screen only: View the screen image on the external device only.
Each time you press f4 the display state changes.
NOTE: For best results, especially if you choose the "Extend" option, increase the screen resolution of
the external device, as follows. Select the Start button, select Settings, and then select System. Under
Display, select the appropriate resolution, and then select Keep changes.
Setting up HDMI audio

HDMI is the only video interface that supports high-definition video and audio. After you connect an HDMI TV
to the computer, you can then turn on HDMI audio by following these steps:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select
Playback devices.
2. On the Playback tab, select the name of the digital output device.
3. Select Set Default, and then select OK.

To return the audio stream to the computer speakers:
1. Right-click the Speakers icon in the notification area, at the far right of the taskbar, and then select
Playback devices.
2. On the Playback tab, select Speakers.
3. Select Set Default, and then select OK.
Discovering and connecting wired displays using MultiStream Transport

MultiStream Transport (MST) allows you to connect multiple wired display devices to your computer by
connecting to the VGA port or DisplayPort connectors on your computer and also to the VGA port or
DisplayPort connectors on a hub or an external docking station. You can connect in several ways, depending
on the type of graphics controller installed on your computer and whether or not your computer includes a
built-in hub. Go to Device Manager to find out what hardware is installed on your computer.
▲ Type device manager in the taskbar search box, and then select the Device Manager app. A list
displays all the devices installed on your computer.
Connect displays to computers with AMD or Nvidia graphics (with an optional hub)
NOTE: With an AMD graphics controller and optional hub, you can connect up to 6 external display devices.
NOTE: With an Nvidia graphics controller and optional hub, you can connect up to 4 external display devices.
To set up multiple display devices, follow these steps:

1. Connect an external hub (purchased separately) to the DisplayPort (DP) connector on your computer,
using a DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC
power.
2. Connect your external display devices to the VGA port or DisplayPort connectors on the hub.
3. To see all of your connected display devices, type device manager in the taskbar search box, and
then select the Device Manager app. If you don't see all of your connected displays, be sure that each is
connected to the correct port on the hub.
NOTE: Multiple display choices include Duplicate, which mirrors your computer screen on all enabled
display devices, or Extend, which spans your computer screen across all enabled display devices.
Connect displays to computers with Intel graphics (with an optional hub)

NOTE: With an Intel graphics controller and optional hub, you can connect up to 3 display devices.
To set up multiple display devices, follow these steps:

1. Connect an external hub (purchased separately) to the DisplayPort connector on your computer, using a
DP-to-DP cable (purchased separately). Be sure that the hub power adapter is connected to AC power.
2. Connect your external display devices to the VGA port or DisplayPort connectors on the hub.
3. When Windows detects a monitor connected to the DisplayPort hub, the DisplayPort Topology
Notification dialog box is displayed. Select the appropriate options to configure your displays. Multiple
display choices include Duplicate, which mirrors your computer screen on all enabled display devices, or
Extend, which extends the screen image across all enabled display devices.
NOTE: If this dialog box does not appear, be sure that each external display device is connected to the
correct port on the hub. Select the Start button, select Settings, and then select System. Under Display,
select the appropriate resolution, and then select Keep changes.
Using video 33
Discovering and connecting to Miracast-compatible wireless displays (select
products only)
NOTE: To learn what type of display you have (Miracast-compatible or Intel WiDi), refer to the
documentation that came with your TV or secondary display.
To discover and connect to Miracast-compatible wireless displays without leaving your current apps, follow
the steps below.
To open Miracast:
▲ Type project in the taskbar search box, and then select Project to a second screen. Select Connect to
a wireless display, and then follow the on-screen instructions.
Discovering and connecting to Intel WiDi certified displays (select Intel products
only)
Use Intel WiDi to wirelessly project individual files such as photos, music, or videos, or to duplicate your entire
computer screen to a TV or a secondary display device.
Intel WiDi, a premium Miracast solution, makes it easy and seamless to pair your secondary display device;
provides for full-screen duplication; and improves speed, quality, and scaling.
To connect to Intel WiDi certified displays:
▲ Type project in the taskbar search box, and then select Project to a second screen. Select Connect to
a wireless display, and then follow the on-screen instructions.
To open Intel WiDi:
▲ Type Intel WiDi in the taskbar search box, and then select Intel WiDi.
Using data transfer

Your computer is a powerful entertainment device that enables you to transfer photos, videos, and movies
from your USB devices to view on your computer.
To enhance your viewing enjoyment, use one of the USB Type-C ports on the computer to connect a USB
device, such as a cell phone, camera, activity tracker, or smartwatch, and transfer the files to your computer.
IMPORTANT: Be sure that the external device is connected to the correct port on the computer, using the
correct cable. Follow the device manufacturer's instructions.
For information about using your USB Type-C features, refer to HP Support Assistant.

Connecting devices to a USB Type-C port (select products only)
NOTE: To connect a USB Type-C device to your computer, you need a USB Type-C cable, purchased
separately.
1. Connect one end of the USB Type-C cable to the USB Type-C port on the computer.
2. Connect the other end of the cable to the external device.
Using data transfer 35

6 Managing power
Your computer can operate on either battery power or external power. When the computer is running on
battery power and an external power source is not available to charge the battery, it is important to monitor
and conserve the battery charge.
Some power management features described in this chapter may not be available on your computer.
Using Sleep and Hibernation

CAUTION: Several well-known vulnerabilities exist when a computer is in the Sleep state. To prevent an
unauthorized user from accessing data on your computer, even encrypted data, HP recommends that you
always initiate Hibernation instead of Sleep anytime the computer will be out of your physical possession.
This practice is particularly important when you travel with your computer.
CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video playback
functionality, or loss of information, do not initiate Sleep while reading from or writing to a disc or an external
media card.
Windows has two power-saving states, Sleep and Hibernation.

● Sleep—The Sleep state is automatically initiated after a period of inactivity. Your work is saved to
memory, allowing you to resume your work very quickly. You can also initiate Sleep manually. For more
information, see Initiating and exiting Sleep on page 36.
● Hibernation—The Hibernation state is automatically initiated if the battery reaches a critical level or the
computer has been in the Sleep state for an extended period of time. In the Hibernation state, your work
is saved to a hibernation file and the computer powers down. You can also initiate Hibernation manually.
For more information, see Initiating and exiting Hibernation (select products only) on page 37.
Initiating and exiting Sleep

You can initiate Sleep in any of the following ways:
● Select the Start button, select the Power icon, and then select Sleep.
● Close the display (select products only).
● Press the Sleep hot key (select products only); for example, fn+f1 or fn+f12.
● Briefly press the power button (select products only).
You can exit Sleep in any of the following ways:
● Briefly press the power button.
● If the computer is closed, raise the display (select products only).
● Press a key on the keyboard (select products only).
● Tap the Touchpad (select products only).
When the computer exits Sleep, your work returns to the screen.
NOTE: If you have set a password to be required on exiting Sleep, you must enter your Windows password
before your work returns to the screen.
36 Chapter 6 Managing power

Initiating and exiting Hibernation (select products only)
You can enable user-initiated Hibernation and change other power settings and timeouts using Power
Options.
1. Right-click the Power icon , and then select Power Options.
2. In the left pane, select Choose what the power buttons do (wording may vary by product).
3. Depending on your product, you can enable Hibernation for battery power or external power in any of
the following ways:
● Power button—Under Power and sleep buttons and lid settings (wording may vary by product),
select When I press the power button, and then select Hibernate.
● Sleep button (select products only)—Under Power and sleep buttons and lid settings (wording
may vary by product), select When I press the sleep button, and then select Hibernate.
● Lid (select products only)—Under Power and sleep buttons and lid settings (wording may vary by
product), select When I close the lid, and then select Hibernate.
● Power menu—Select Change Settings that are currently unavailable, and then, under Shutdown
settings, select the Hibernate check box.
The Power menu can be accessed by selecting the Start button.
4. Select Save changes.
▲ To initiate Hibernation, use the method that you enabled in step 3.
▲ To exit Hibernation, briefly press the power button.
NOTE: If you have set a password to be required on exiting Hibernation, you must enter your Windows
password before your work returns to the screen.
Shutting down (turning off) the computer

CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before
shutting down the computer.
The Shut down command closes all open programs, including the operating system, and then turns off the
display and the computer.
Shut down the computer when it will be unused and disconnected from external power for an extended
period.
The recommended procedure is to use the Windows Shut down command.
NOTE: If the computer is in the Sleep state or in Hibernation, first exit Sleep or Hibernation by briefly
pressing the power button.
1. Save your work and close all open programs.

2. Select the Start button, select the Power icon, and then select Shut down.
Shutting down (turning off) the computer 37

If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the
following emergency procedures in the sequence provided:
● Press ctrl+alt+delete, select the Power icon, and then select Shut down.
● Press and hold the power button for at least 10 seconds.
● If your computer has a user-replaceable battery (select products only), disconnect the computer from
external power, and then remove the battery.
Using the Power icon and Power Options

The Power icon is located on the Windows taskbar. The Power icon allows you to quickly access power
settings and view the remaining battery charge.

● To view the percentage of remaining battery charge, place the mouse pointer over the Power icon
.
● To use Power Options, right–click the Power icon , and then select Power Options.
Different Power icons indicate whether the computer is running on battery or external power. Placing the
mouse pointer over the icon reveals a message if the battery has reached a low or critical battery level.
Running on battery power

WARNING! To reduce potential safety issues, use only the battery provided with the computer, a
replacement battery provided by HP, or a compatible battery purchased from HP.
When a charged battery is in the computer and the computer is not plugged into external power, the computer
runs on battery power. When the computer is off and unplugged from external power, the battery in the
computer slowly discharges. The computer displays a message when the battery reaches a low or critical
battery level.
Computer battery life varies, depending on power management settings, programs running on the computer,
screen brightness, external devices connected to the computer, and other factors.
NOTE: When you disconnect external power, the display brightness is automatically decreased to conserve
battery charge. Select computer products can switch between graphic controllers to conserve battery charge.
Using HP Fast Charge (select products only)

The HP Fast Charge feature allows you to quickly charge your computer battery. Charging time may vary by
+/- 10%. Depending on your computer model and the HP AC adapter provided with your computer, HP Fast
Charge operates in one or more of the following ways:
● When the remaining battery charge is between zero and 50%, the battery will charge to 50% of full
capacity in no more than 30 to 45 minutes, depending on your computer model.
● When the remaining battery charge is between zero and 90%, the battery will charge to 90% of full
capacity in no more than 90 minutes.
To use HP Fast Charge, shut down your computer, and then connect the AC adapter to your computer and to
external power.

Displaying battery charge
To view the percentage of remaining battery charge, place the mouse pointer over the Power icon .
Finding battery information in HP Support Assistant (select products only)

To access battery information:
1. Type support in the taskbar search box, and then select the HP Support Assistant app.
‒ or –
Select the question mark icon in the taskbar.
2. Select Troubleshooting and fixes, and then in the Diagnostics section, select HP Battery Check. If HP
Battery Check indicates that your battery should be replaced, contact support.
HP Support Assistant provides the following tools and information about the battery:
● HP Battery Check
● Information about battery types, specifications, life cycles, and capacity
Conserving battery power

To conserve battery power and maximize battery life:
● Lower the brightness of the display.
● Turn off wireless devices when you are not using them.
● Disconnect unused external devices that are not plugged into an external power source, such as an
external hard drive connected to a USB port.
● Stop, disable, or remove any external media cards that you are not using.
● Before you leave your work, initiate Sleep or shut down the computer.
Identifying low battery levels

When a battery that is the sole power source for the computer reaches a low or critical battery level, the
following behavior occurs:
● The battery light (select products only) indicates a low or critical battery level.
– or –
● The Power icon shows a low or critical battery notification.
NOTE: For additional information about the Power icon, see Using the Power icon and Power Options
on page 38.
The computer takes the following actions for a critical battery level:
● If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in
the Sleep state and then shuts down and loses any unsaved information.
● If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates
Hibernation.
Running on battery power 39

Resolving a low battery level
Resolving a low battery level when external power is available
Connect one of the following to the computer and to external power:
● AC adapter
● Optional docking device or expansion product
● Optional power adapter purchased as an accessory from HP
Resolving a low battery level when no power source is available

Save your work and shut down the computer.
Resolving a low battery level when the computer cannot exit Hibernation
1. Connect the AC adapter to the computer and to external power.
2. Exit Hibernation by pressing the power button.
Factory-sealed battery
To monitor the status of the battery, or if the battery is no longer holding a charge, run HP Battery Check in
the HP Support Assistant app (select products only).
‒ or –
2. Select Troubleshooting and fixes, and then in the Diagnostics section, select HP Battery Check. If HP
Battery Check indicates that your battery should be replaced, contact support.
The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the
battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support.
Running on external power

For information about connecting to external power, see the Setup Instructions poster provided in the
computer box.
The computer does not use battery power when the computer is connected to external power with an
approved AC adapter or an optional docking device or expansion product.
WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a
replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
WARNING! Do not charge the computer battery while you are aboard aircraft.
Connect the computer to external power under any of the following conditions:
● When charging or calibrating a battery
● When installing or updating system software
● When updating the system BIOS
● When writing information to a disc (select products only)

● When running Disk Defragmenter on computers with internal hard drives
● When performing a backup or recovery
When you connect the computer to external power:
● The battery begins to charge.
● The screen brightness increases.
● The Power icon changes appearance.
When you disconnect external power:

● The computer switches to battery power.
● The screen brightness automatically decreases to conserve battery charge.
● The Power icon changes appearance.
Running on external power 41

7 Security
Protecting the computer

Standard security features provided by the Windows operating system and the Windows Computer Setup
utility (BIOS, which runs under any operating system) can protect your personal settings and data from a
variety of risks.
NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product
from being mishandled or stolen.
NOTE: Before you send your computer for service, back up and delete confidential files, and remove all
password settings.
NOTE: Some features listed in this chapter may not be available on your computer.
NOTE: Your computer supports Computrace, which is an online security-based tracking and recovery service
available in select regions. If the computer is stolen, Computrace can track the computer if the unauthorized
user accesses the Internet. You must purchase the software and subscribe to the service in order to use
Computrace. For information about ordering the Computrace software, go to http://www.hp.com.
Table 7-1 Security solutions
Computer risk Security feature
Unauthorized use of the computer ● HP Client Security software, in combination with a password,
smart card, contactless card, registered fingerprints, or
other authentication credential
● BIOS power-on password
Unauthorized access to Computer Setup (BIOS) BIOS administrator password in Computer Setup*
Unauthorized access to the contents of a hard drive DriveLock password (select products only) in Computer Setup*
Unauthorized startup from an optional external optical drive Boot options feature in Computer Setup*
(select products only), optional external hard drive (select
products only), or internal network adapter
Unauthorized access to a Windows user account Windows user password
Unauthorized access to data Windows BitLocker
Unauthorized removal of the computer Security cable slot (used with an optional security cable on select
products only)
*Computer Setup is an embedded, ROM-based utility that can be used even when the operating system is not working or will not load.
You can use a pointing device (TouchPad, pointing stick, or USB mouse) or the keyboard to navigate and make selections in Computer
Setup.
NOTE: On tablets without keyboards, you can use the touch screen.
Using passwords
A password is a group of characters that you choose to secure your computer information. Several types of
passwords can be set, depending on how you want to control access to your information. Passwords can be
set in Windows or in Computer Setup, which is preinstalled on the computer.
42 Chapter 7 Security
● BIOS administrator, power-on, and DriveLock passwords are set in Computer Setup and are managed by
the system BIOS.
● Windows passwords are set only in the Windows operating system.
● If you forget both the DriveLock user password and the DriveLock master password set in Computer
Setup, the hard drive that is protected by the passwords is permanently locked and can no longer be
used.
You can use the same password for a Computer Setup feature and for a Windows security feature.
Use the following tips for creating and saving passwords:
● When creating passwords, follow requirements set by the program.
● Do not use the same password for multiple applications or websites, and do not reuse your Windows
password for any other application or website.
● Use the Password Manager feature of HP Client Security to store your user names and passwords for
your websites and applications. You can securely read them in the future if they cannot be remembered.
● Do not store passwords in a file on the computer.
The following tables list commonly used Windows and BIOS administrator passwords and describe their
functions.
Setting passwords in Windows

Table 7-2 Types of Windows passwords and their functions
Password Function
Administrator password* Protects access to a Windows administrator-level account.
NOTE: Setting the Windows administrator password does not

set the BIOS administrator password.
User password* Protects access to a Windows user account.
*For information about setting a Windows administrator password or a Windows user password, type support in the taskbar search
box, and then select the HP Support Assistant app.
Setting passwords in Computer Setup

Table 7-3 Types of Computer Setup passwords and their functions
Password Function
BIOS administrator password* Protects access to Computer Setup.
NOTE: If features have been enabled to prevent removing the

BIOS administrator password, you may not be able to remove it
until those features have been disabled.
Power-on password ● Must be entered each time you turn on or restart the
computer.
● If you forget your power-on password, you cannot turn on or

restart the computer.
DriveLock master password* Protects access to the internal hard drive that is protected by
DriveLock, and is set under DriveLock Passwords during the
Using passwords 43
Table 7-3 Types of Computer Setup passwords and their functions (continued)
Password Function
enable process. This password is also used to remove DriveLock

protection.
DriveLock user password* Protects access to the internal hard drive that is protected by
DriveLock, and is set under DriveLock Passwords during the
enable process.
*For details about each of these passwords, see the following topics.
Managing a BIOS administrator password

To set, change, or delete this password, follow these steps:
Setting a new BIOS administrator password
1. Start Computer Setup.
Setup.
▲ Turn off the tablet. Press the power button in combination with the volume down button until
the Startup menu is displayed, and then tap f10 to enter Computer Setup.
2. Select Security, select Create BIOS administrator password or Set Up BIOS administrator Password
(select products only), and then press enter.
3. When prompted, type a password.
4. When prompted, type the new password again to confirm.
select Yes.

Changing a BIOS administrator password
Setup.
2. Enter your current BIOS administrator password.
3. Select Security, select Change BIOS administrator Password or Change Password (select products
only), and then press enter.
4. When prompted, type your current password.
5. When prompted, type your new password.
6. When prompted, type your new password again to confirm.
select Yes.

Deleting a BIOS administrator password
Setup.
2. Enter your current BIOS administrator password.
3. Select Security, select Change BIOS administrator Password or Change Password (select products
only), and then press enter.
4. When prompted, type your current password.
5. When prompted for the new password, leave the field empty, and then press enter.
6. When prompted to type your new password again, leave the field empty, and then press enter.
select Yes.
Entering a BIOS administrator password

At the BIOS administrator password prompt, type your password (using the same kind of keys you used to
set the password), and then press enter. After two unsuccessful attempts to enter the BIOS administrator
password, you must restart the computer and try again.
Using DriveLock Security Options

DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be applied
only to the internal hard drive(s) of the computer. After DriveLock protection is applied to a drive, the
appropriate password must be entered to access the drive. The drive must be inserted into the computer or an
advanced port replicator in order for it to be unlocked.
DriveLock Security Options offers the following features:
Using passwords 45
● Automatic DriveLock—See Selecting Automatic DriveLock (select products only) on page 46.
● Set DriveLock Master Password—See Selecting manual DriveLock on page 47.
● Enable DriveLock—See Enabling DriveLock and setting a DriveLock user password on page 48.
Selecting Automatic DriveLock (select products only)

A BIOS administrator password must be set before you can enable Automatic DriveLock. When Automatic
DriveLock is enabled, a random DriveLock user password and a DriveLock master password derived from the
BIOS administrator password are created. When the computer is turned on, the random user password
automatically unlocks the drive. If the drive is moved to another computer, you must enter the BIOS
administrator password for the original computer at the DriveLock password prompt to unlock the drive.
Enabling Automatic DriveLock
To enable Automatic DriveLock, follow these steps:

1. Turn off the computer.
2. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup.
1. Turn off the tablet.
2. Press the power button in combination with the volume down button until the Startup menu
is displayed, and then tap f10 to enter Computer Setup.
2. At the BIOS administrator password prompt, enter the BIOS administrator password, and then press
enter.
3. Select Security, select Hard Drive Utilities, select DriveLock/Automatic DriveLock, and then press
enter.
4. Use the enter key, left mouse click, or touch screen to select the Automatic DriveLock check box.
select Yes.
Disabling Automatic DriveLock
To disable Automatic DriveLock, follow these steps:

2. At the BIOS administrator password prompt, enter the BIOS administrator password, and then press
enter.
enter.
4. Select an internal hard drive, and then press enter.
5. Use the enter key, left mouse click, or touch screen to clear the Automatic DriveLock check box.
select Yes.
Entering an Automatic DriveLock password
While Automatic DriveLock is enabled and the drive remains attached to the original computer, you will not be
prompted to enter a DriveLock password to unlock the drive. However, if the drive is moved to another
computer, or the system board is replaced on the original computer, you will be prompted to provide the
DriveLock password.
If this happens, at the DriveLock Password prompt, type the BIOS administrator password for the original
computer (using the same kind of keys you used to set the password), and then press enter to unlock the
drive.
After three incorrect attempts to enter the password, you must shut down the computer and try again.
Selecting manual DriveLock

IMPORTANT: To prevent a DriveLock-protected hard drive from becoming permanently unusable, record the
DriveLock user password and the DriveLock master password in a safe place away from your computer. If you
forget both DriveLock passwords, the hard drive will be permanently locked and can no longer be used.
To manually apply DriveLock protection to an internal hard drive, a master password must be set, and
DriveLock must be enabled in Computer Setup. Note the following considerations about using DriveLock
protection:
● After DriveLock protection is applied to a hard drive, the hard drive can be accessed only by entering
either the DriveLock user password or the master password.
● The owner of the DriveLock user password should be the day-to-day user of the protected hard drive.
The owner of the DriveLock master password may be either a system administrator or the day-to-day
user.
● The DriveLock user password and the DriveLock master password can be identical.
Setting a DriveLock master password
To set a DriveLock master password, follow these steps:

Using passwords 47
2. Select Security, make the selection for Hard Drive Utilities, select DriveLock/Automatic DriveLock,
and then press enter.
3. Select the hard drive you want to protect, and then press enter.
4. Select Set DriveLock Master Password, and then press enter.
5. Carefully read the warning.
6. Follow the on-screen instructions to set a DriveLock master password.
NOTE: You can enable DriveLock and set a DriveLock user password before exiting from Computer
Setup. For more information, see Enabling DriveLock and setting a DriveLock user password
on page 48.
select Yes.
Enabling DriveLock and setting a DriveLock user password

To enable DriveLock, and set a DriveLock user password, follow these steps:
enter.
3. Select the hard drive you want to protect, and then press enter.
4. Select Enable DriveLock and then press enter.
5. Carefully read the warning.
6. Follow the on-screen instructions to set a DriveLock user password and enable DriveLock.
select Yes.
Disabling DriveLock
enter.
3. Select the hard drive you want to manage, and then press enter.
4. Select Disable DriveLock, and then press enter.
5. Follow the on-screen instructions to disable DriveLock.
select Yes.
Entering a DriveLock password

Be sure that the hard drive is inserted into the computer (not into an optional docking device or external
MultiBay).
At the DriveLock Password prompt, type your DriveLock user or master password (using the same kind of
keys you used to set the password), and then press enter.
After three incorrect attempts to enter the password, you must shut down the computer and try again.
Changing a DriveLock password

To change a DriveLock password in Computer Setup, follow these steps:
2. Press the power button.
3. At the DriveLock Password prompt, type the current DriveLock user password or master password that
you are changing, press enter, and then press or tap f10 to enter Computer Setup.
enter.
5. Select the hard drive you want to manage, and then press enter.
6. Make the selection for the DriveLock password that you want to change, and then follow the on-screen
instructions to enter passwords.
Using passwords 49
NOTE: The Change DriveLock Master Password option is visible only if the DriveLock master password
was provided at the DriveLock Password prompt in step 3.
select Yes.
Windows Hello (select products only)

On products equipped with a fingerprint reader or an infrared camera, you can use Windows Hello to sign in by
swiping your finger or looking at the camera.
To set up Windows Hello:
1. Select the Start button, select Settings, select Accounts, and then select Sign-in options.
2. To add a password, select Add.
3. Select Get Started, and then follow the on-screen instructions enroll your fingerprint or facial ID and set
up a PIN.
IMPORTANT: To prevent fingerprint logon issues, make sure when you register your fingerprint that all
sides of your finger are registered by the fingerprint reader.
NOTE: The PIN is not limited in length. The default setting is for numbers only. To include alphabetic or
special characters, select the include letters and symbols check box.
Using antivirus software

When you use the computer to access e-mail, a network, or the Internet, you potentially expose it to
computer viruses. Computer viruses can disable the operating system, programs, or utilities, or cause them to
function abnormally.
Antivirus software can detect most viruses, destroy them, and, in most cases, repair any damage they have
caused. To provide ongoing protection against newly discovered viruses, antivirus software must be kept up
to date.
Windows Defender is preinstalled on your computer. It is strongly recommended that you continue to use an
antivirus program in order to fully protect your computer.
For more information about computer viruses, access the HP Support Assistant.
Using firewall software

Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be a software
program you install on your computer and/or network, or it can be a solution made up of both hardware and
software.
There are two types of firewalls to consider:
● Host-based firewalls—Software that protects only the computer it is installed on.
● Network-based firewalls—Installed between your DSL or cable modem and your home network to
protect all the computers on the network.
When a firewall is installed on a system, all data sent to and from the system is monitored and compared with
a set of user-defined security criteria. Any data that does not meet those criteria is blocked.
Your computer or networking equipment may already have a firewall installed. If not, firewall software
solutions are available.
NOTE: Under some circumstances a firewall can block access to Internet games, interfere with printer or file
sharing on a network, or block authorized e-mail attachments. To temporarily resolve the problem, disable
the firewall, perform the task that you want to perform, and then reenable the firewall. To permanently
resolve the problem, reconfigure the firewall.
Installing software updates

HP, Windows, and third-party software installed on your computer should be regularly updated to correct
security problems and improve software performance.
IMPORTANT: Microsoft sends out alerts regarding Windows updates, which may include security updates.
To protect the computer from security breaches and computer viruses, install all updates from Microsoft as
soon as you receive an alert.
You can install these updates automatically.

To view or change the settings:
1. Select the Start button, select Settings, and then select Update & Security.
2. Select Windows Update, and then follow the on-screen instructions.
3. To schedule a time for installing updates, select Advanced Options, and then follow the on-screen
instructions.
Using HP Client Security (select products only)

HP Client Security software is preinstalled on your computer. This software can be accessed through the HP
Client Security icon at the far right of the taskbar or Windows Control Panel. It provides security features that
help protect against unauthorized access to the computer, networks, and critical data. For more information,
see the HP Client Security software Help.
Using HP Device as a Service (select products only)

HP DaaS is a cloud-based IT solution that enables businesses to effectively manage and secure their company
assets. HP DaaS helps protect devices against malware and other attacks, monitors device health, and helps
reduce time spent solving device and security issues. You can quickly download and install the software,
which is highly cost effective relative to traditional in-house solutions. For more information, go to
https://www.hptouchpointmanager.com/.
Using an optional security cable (select products only)

A security cable (purchased separately) is designed to act as a deterrent, but it may not prevent the computer
from being mishandled or stolen. To connect a security cable to your computer, follow the device
manufacturer's instructions.
Using a fingerprint reader (select products only)

Integrated fingerprint readers are available on select products. In order to use the fingerprint reader, you
must enroll your fingerprints in HP Client Security's Credential Manager. For more information, see the HP
Client Security software Help.
Installing software updates 51

After you enroll your fingerprints in Credential Manager, you can use HP Client Security's Password Manager to
store and fill in your user names and passwords in supported websites and applications.
Locating the fingerprint reader

The fingerprint reader is a small metallic sensor that is located in one of the following areas of your computer:
● Near the bottom of the TouchPad
● On the right side of the keyboard
● On the upper-right side of the display
● On the left side of the display
● On the back of the display
Depending on your product, the reader may be oriented horizontally or vertically.
8 Maintenance
It is important to perform regular maintenance to keep your computer in optimal condition. This chapter
explains how to use tools like Disk Defragmenter and Disk Cleanup. It also provides instructions for updating
programs and drivers, steps to clean the computer, and tips for traveling with (or shipping) the computer.
Improving performance
You can improve the performance of your computer by performing regular maintenance tasks with tools such
as Disk Defragmenter and Disk Cleanup.
Using Disk Defragmenter

HP recommends using Disk Defragmenter to defragment your hard drive at least once a month.
NOTE: It is not necessary to run Disk Defragmenter on solid-state drives.
To run Disk Defragmenter:

1. Connect the computer to AC power.
2. Type defragment in the taskbar search box, and then select Defragment and optimize your drives.
3. Follow the on-screen instructions.

For additional information, access the Disk Defragmenter software Help.
Using Disk Cleanup

Use Disk Cleanup to search the hard drive for unnecessary files that you can safely delete to free up disk space
and help the computer run more efficiently.
To run Disk Cleanup:
1. Type disk in the taskbar search box, and then select Disk Cleanup.
Improving performance 53
Using HP 3D DriveGuard (select products only)
HP 3D DriveGuard protects a hard drive by parking the drive and halting data requests under either of the
following conditions:
● You drop the computer.
● You move the computer with the display closed while the computer is running on battery power.
A short time after the end of one of these events, HP 3D DriveGuard returns the hard drive to normal
operation.
NOTE: Only internal hard drives are protected by HP 3D DriveGuard. A hard drive installed in an optional
docking device or connected to a USB port is not protected by HP 3D DriveGuard.
NOTE: Because solid-state drives (SSDs) lack moving parts, HP 3D DriveGuard is unnecessary for these
drives.
Identifying HP 3D DriveGuard status

The hard drive light on the computer changes color to show that the drive in a primary hard drive bay and/or
the drive in a secondary hard drive bay (select products only) is parked.
Updating programs and drivers

HP recommends that you update your programs and drivers on a regular basis. Updates can resolve issues
and bring new features and options to your computer. For example, older graphics components might not
work well with the most recent gaming software. Without the latest driver, you would not be getting the most
out of your equipment.
Go to http://www.hp.com/support to download the latest versions of HP programs and drivers. In addition,
register to receive automatic notifications when updates become available.
If you would like to update your programs and drivers, follow these instructions:
‒ or –
2. Select My notebook, select the Updates tab, and then select Check for updates and messages.
Cleaning your computer

Use the following products to safely clean your computer:
● Alcohol-free glass-cleaning fluid
● Solution of water and mild soap
● Dry microfiber cleaning cloth or a chamois (static-free cloth without oil)
● Static-free cloth wipes
54 Chapter 8 Maintenance
CAUTION: Avoid strong cleaning solvents or germicidal wipes that can permanently damage your computer.
If you are not sure that a cleaning product is safe for your computer, check the product contents to make sure
that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, hydrogen peroxide,
naphtha, and hydrocarbon solvents are not included in the product.
Fibrous materials, such as paper towels, can scratch the computer. Over time, dirt particles and cleaning
agents can get trapped in the scratches.
Cleaning procedures
Follow the procedures in this section to safely clean your computer.
WARNING! To prevent electric shock or damage to components, do not attempt to clean your computer
while it is on.
2. Disconnect AC power.
3. Disconnect all powered external devices.
CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids directly on
any computer surface. Liquids dripped on the surface can permanently damage internal components.
Cleaning the display

Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be sure that
a display is dry before you close the computer.
Cleaning the sides or cover

To clean the sides or cover, use a soft microfiber cloth or chamois moistened with one of the cleaning
solutions listed previously, or use an acceptable disposable wipe.
NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and debris.
Cleaning the TouchPad, keyboard, or mouse (select products only)

WARNING! To reduce the risk of electric shock or damage to internal components, do not use a vacuum
cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard
surface.
CAUTION: To prevent damage to internal components, do not allow liquids to drip between the keys.
● To clean the TouchPad, keyboard, or mouse, use a soft microfiber cloth or a chamois moistened with one
of the cleaning solutions listed previously.
● To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a can of
compressed air with a straw extension.
Traveling with or shipping your computer

If you have to travel with or ship your computer, follow these tips to keep your equipment safe.
● Prepare the computer for traveling or shipping:
– Back up your information to an external drive.
– Remove all discs and all external media cards, such as memory cards.
Traveling with or shipping your computer 55

– Turn off and then disconnect all external devices.
– Shut down the computer.
● Take along a backup of your information. Keep the backup separate from the computer.
● When traveling by air, carry the computer as hand luggage; do not check it in with the rest of your
luggage.
CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include
airport walk-through devices and security wands. Airport conveyer belts and similar security devices
that check carry-on baggage use X-rays instead of magnetism and do not damage drives.
● If you plan to use the computer during a flight, listen for the in-flight announcement that tells you when
you are allowed to use your computer. In-flight computer use is at the discretion of the airline.
● If you are shipping the computer or a drive, use suitable protective packaging and label the package
“FRAGILE.”
● The use of wireless devices may be restricted in some environments. Such restrictions may apply aboard
aircraft, in hospitals, near explosives, and in hazardous locations. If you are uncertain of the policy that
applies to the use of a wireless device in your computer, ask for authorization to use your computer
before you turn it on.
● If you are traveling internationally, follow these suggestions:
– Check the computer-related customs regulations for each country or region on your itinerary.
– Check the power cord and adapter requirements for each location in which you plan to use the
computer. Voltage, frequency, and plug configurations vary.
WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt
to power the computer with a voltage converter kit sold for appliances.
56 Chapter 8 Maintenance
9 Backing up, restoring, and recovering
This chapter provides information about the following processes, which are standard procedure for most
products:
● Backing up your personal information—You can use Windows tools to back up your personal
information (see Using Windows tools on page 57).
● Creating a restore point—You can use Windows tools to create a restore point (see Using Windows
tools on page 57).
● Creating recovery media (select products only)—You can use the HP Cloud Recovery Download Tool
(select products only) to create recovery media (see Using the HP Cloud Recovery Download Tool to
create recovery media (select products only) on page 57).
● Restoring and recovery—Windows offers several options for restoring from backup, refreshing the
computer, and resetting the computer to its original state (see Using Windows tools on page 57).
IMPORTANT: If you will be performing recovery procedures on a tablet, the tablet battery must be at least
70% charged before you start the recovery process.
IMPORTANT: For a tablet with a detachable keyboard, connect the tablet to the keyboard base before
beginning any recovery process.
Backing up information and creating recovery media

Using Windows tools
IMPORTANT: Windows is the only option that allows you to back up your personal information. Schedule
regular backups to avoid information loss.
You can use Windows tools to back up personal information and create system restore points and recovery
media.
NOTE: If computer storage is 32 GB or less, Microsoft System Restore is disabled by default.
For more information and steps, see the Get Help app.
1. Select the Start button, and then select the Get Help app.
2. Enter the task you want to perform.
NOTE: You must be connected to the Internet to access the Get Help app.
Using the HP Cloud Recovery Download Tool to create recovery media (select
products only)
You can use the HP Cloud Recovery Download Tool to create HP Recovery media on a bootable USB flash drive.
To download the tool:
▲ Go to the Microsoft Store and search for HP Cloud Recovery.
For details, go to http://www.hp.com/support, search for HP Cloud Recovery, and then select "HP PCs – Using
the Cloud Recovery Tool (Windows 10, 7)."
Backing up information and creating recovery media 57

NOTE: If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to
http://www.hp.com/support, select your country or region, and then follow the on-screen instructions.
Restoring and recovery

Restoring, resetting, and refreshing using Windows tools
Windows offers several options for restoring, resetting, and refreshing the computer. For details, see Using
Windows tools on page 57.
Recovering using HP Recovery media

HP Recovery media is used to recover the original operating system and software programs that were
installed at the factory. On select products, it can be created on a bootable USB flash drive using the HP Cloud
Recovery Download Tool. For details, see Using the HP Cloud Recovery Download Tool to create recovery
media (select products only) on page 57.
NOTE: If you cannot create recovery media yourself, contact support to obtain recovery discs. Go to
http://www.hp.com/support, select your country or region, and then follow the on-screen instructions.
To recover your system:

▲ Insert the HP Recovery media, and then restart the computer.
Changing the computer boot order

If your computer does not restart using the HP Recovery media, you can change the computer boot order. This
is the order of devices listed in BIOS where the computer looks for startup information. You can change the
selection to an optical drive or a USB flash drive, depending on the location of your HP Recovery media.
To change the boot order:
IMPORTANT: For a tablet with a detachable keyboard, connect the tablet to the keyboard base before
beginning these steps.
1. Insert the HP Recovery media.

2. Access the system Startup menu.
For computers or tablets with keyboards attached:
▲ Turn on or restart the computer or tablet, quickly press esc, and then press f9 for boot options.
For tablets without keyboards:
▲ Turn on or restart the tablet, quickly hold down the volume up button, and then select f9.
‒ or –
Turn on or restart the tablet, quickly hold down the volume down button, and then select f9.
3. Select the optical drive or USB flash drive from which you want to boot, and then follow the on-screen
instructions.
58 Chapter 9 Backing up, restoring, and recovering

10 Computer Setup (BIOS), TPM, and HP Sure
Start
Using Computer Setup

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup
includes settings for the types of devices installed, the startup sequence of the computer, and the amount of
system and extended memory.
NOTE: Use extreme care when making changes in Computer Setup. Errors can prevent the computer from
operating properly.
Starting Computer Setup

▲ Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup.
Navigating and selecting in Computer Setup

● To select a menu or a menu item, use the tab key and the keyboard arrow keys and then press enter, or
use a pointing device to select the item.
● To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or
use the up arrow key or the down arrow key on the keyboard.
● To close open dialog boxes and return to the main Computer Setup screen, press esc, and then follow
the on-screen instructions.
To exit Computer Setup, choose one of the following methods:
● To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and
Exit, and then select Yes.
● To save your changes and exit Computer Setup menus, select Main, select Save Changes and Exit, and
then select Yes.
Restoring factory settings in Computer Setup

NOTE: Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1. Start Computer Setup. See Starting Computer Setup on page 59.
2. Select Main, select Apply Factory Defaults and Exit, and then select Yes.
Using Computer Setup 59

NOTE: On select products, the selections may display Restore Defaults instead of Apply Factory
Defaults and Exit.
NOTE: Your password settings and security settings are not changed when you restore the factory settings.
Updating the BIOS

Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding installing
and troubleshooting the file.
Determining the BIOS version

To decide whether you need to update Computer Setup (BIOS), first determine the BIOS version on your
computer.
BIOS version information (also known as ROM date and System BIOS) can be accessed by pressing fn+esc (if
you are already in Windows) or by using Computer Setup.
2. Select Main, and then select System Information.
3. To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and
Exit, and then select Yes.
To check for later BIOS versions, see Downloading a BIOS update on page 60.
Downloading a BIOS update

CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download and
install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do
not download or install a BIOS update while the computer is running on battery power, docked in an optional
docking device, or connected to an optional power source. During the download and installation, follow these
instructions:
Do not disconnect power on the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.
– or –
2. Select Updates, and then select Check for updates and messages.
4. At the download area, follow these steps:
60 Chapter 10 Computer Setup (BIOS), TPM, and HP Sure Start

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed on your
computer. Make a note of the date, name, or other identifier. You may need this information to
locate the update later, after it has been downloaded to your hard drive.
b. Follow the on-screen instructions to download your selection to the hard drive.
Make a note of the path to the location on your hard drive where the BIOS update is downloaded.
You will need to access this path when you are ready to install the update.
NOTE: If you connect your computer to a network, consult the network administrator before installing
any software updates, especially system BIOS updates.
BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the download
is complete. If no instructions are displayed, follow these steps:
1. Type file in the taskbar search box, and then select File Explorer.
2. Select your hard drive designation. The hard drive designation is typically Local Disk (C:).
3. Using the hard drive path you recorded earlier, open the folder that contains the update.
4. Double-click the file that has an .exe extension (for example, filename.exe).
The BIOS installation begins.
5. Complete the installation by following the on-screen instructions.
NOTE: After a message on the screen reports a successful installation, you can delete the downloaded file
from your hard drive.
Changing the boot order using the f9 prompt

To dynamically choose a boot device for the current startup sequence, follow these steps:
1. Access the Boot Device Options menu:
● Turn on or restart the computer, and when the HP logo appears, press f9 to enter the Boot Device
Options menu.
2. Select a boot device, press enter, and then follow the on-screen instructions.
TPM BIOS settings (select products only)

IMPORTANT: Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure
that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or
licenses must be obtained if applicable. For any compliance issues arising from your operation/usage of TPM
which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will
not be responsible for any related liabilities.
TPM provides additional security for your computer. You can modify the TPM settings in Computer Setup
(BIOS).
NOTE: If you change the TPM setting to Hidden, TPM is not visible in the operating system.
To access TPM settings in Computer Setup:

2. Select Security, select TPM Embedded Security, and then follow the on-screen instructions.
TPM BIOS settings (select products only) 61

Using HP Sure Start (select products only)
Select computer models are configured with HP Sure Start, a technology that monitors the computer's BIOS
for attacks or corruption. If the BIOS becomes corrupted or is attacked, HP Sure Start automatically restores
the BIOS to its previously safe state, without user intervention.
HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default
configuration. The default configuration can be customized by advanced users.
To access the latest documentation on HP Sure Start, go to http://www.hp.com/support. Select Find your
product, and then follow the on-screen instructions.
62 Chapter 10 Computer Setup (BIOS), TPM, and HP Sure Start

11 Using HP PC Hardware Diagnostics
Using HP PC Hardware Diagnostics Windows (select products

only)
HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to
determine whether the computer hardware is functioning properly. The tool runs within the Windows
operating system in order to diagnose hardware failures.
If HP PC Hardware Diagnostics Windows is not installed on your computer, first you must download and install
it. To download HP PC Hardware Diagnostics Windows, see Downloading HP PC Hardware Diagnostics
Windows on page 63.
After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Help and
Support or HP Support Assistant.
1. To access HP PC Hardware Diagnostics Windows from HP Help and Support:
a. Select the Start button, and then select HP Help and Support.
b. Select HP PC Hardware Diagnostics Windows.
– or –
To access HP PC Hardware Diagnostics Windows from HP Support Assistant:
a. Type support in the taskbar search box, and then select the HP Support Assistant app.
– or –
b. Select Troubleshooting and fixes.
c. Select Diagnostics, and then select HP PC Hardware Diagnostics Windows.
2. When the tool opens, select the type of diagnostic test you want to run, and then follow the on-screen
instructions.
NOTE: If you need to stop a diagnostic test at any time, select Cancel.
When HP PC Hardware Diagnostics Windows detects a failure that requires hardware replacement, a 24-digit
Failure ID code is generated. The screen displays one of the following options:
● A Failure ID link is displayed. Select the link and follow the on-screen instructions.
● A Quick Response (QR) code is displayed. With a mobile device, scan the code and then follow the on-
screen instructions.
● Instructions for calling support are displayed. Follow those instructions.
Downloading HP PC Hardware Diagnostics Windows

● The HP PC Hardware Diagnostics Windows download instructions are provided in English only.
● You must use a Windows computer to download this tool because only .exe files are provided.
Using HP PC Hardware Diagnostics Windows (select products only) 63

Downloading the latest HP PC Hardware Diagnostics Windows version
To download HP PC Hardware Diagnostics Windows, follow these steps:
1. Go to http://www.hp.com/go/techcenter/pcdiags. The HP PC Diagnostics home page is displayed.
2. Select Download HP Diagnostics Windows, and then select a location on your computer or a USB flash
drive.
The tool is downloaded to the selected location.
Downloading HP Hardware Diagnostics Windows by product name or number (select products

only)
NOTE: For some products, it may be necessary to download the software to a USB flash drive by using the
product name or number.
To download HP PC Hardware Diagnostics Windows by product name or number, follow these steps:
1. Go to http://www.hp.com/support.
2. Select Get software and drivers, select your type of product, and then enter the product name or
number in the search box that is displayed.
3. In the Diagnostics section, select Download, and then follow the on-screen instructions to select the
specific Windows diagnostics version to be downloaded to your computer or USB flash drive.
The tool is downloaded to the selected location.
Installing HP PC Hardware Diagnostics Windows

To install HP PC Hardware Diagnostics Windows, follow these steps:
▲ Navigate to the folder on your computer or the USB flash drive where the .exe file was downloaded,
double-click the .exe file, and then follow the on-screen instructions.
Using HP PC Hardware Diagnostics UEFI

NOTE: For Windows 10 S computers, you must use a Windows computer and a USB flash drive to download
and create the HP UEFI support environment because only .exe files are provided. For more information, see
Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive on page 65.
HP PC Hardware Diagnostics UEFI (Unified Extensible Firmware Interface) allows you to run diagnostic tests to
determine whether the computer hardware is functioning properly. The tool runs outside the operating
system so that it can isolate hardware failures from issues that are caused by the operating system or other
software components.
If your PC will not boot into Windows, you can use HP PC Hardware Diagnostics UEFI to diagnose hardware
issues.
When HP PC Hardware Diagnostics Windows detects a failure that requires hardware replacement, a 24-digit
Failure ID code is generated. For assistance in solving the problem:
▲ Select Get Support, and then use a mobile device to scan the QR code that displays on the next screen.
The HP Customer Support - Service Center page displays, with your Failure ID and product number
automatically filled in. Follow the on-screen instructions.
– or –
Contact support, and provide the Failure ID code.
64 Chapter 11 Using HP PC Hardware Diagnostics

NOTE: To start diagnostics on a convertible computer, your computer must be in notebook mode, and you
must use the attached keyboard.
NOTE: If you need to stop a diagnostic test, press esc.
Starting HP PC Hardware Diagnostics UEFI

To start HP PC Hardware Diagnostics UEFI, follow these steps:
1. Turn on or restart the computer, and quickly press esc.
2. Press f2.
The BIOS searches three places for the diagnostic tools, in the following order:
a. Connected USB flash drive
NOTE: To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see
Downloading the latest HP PC Hardware Diagnostics UEFI version on page 65.
b. Hard drive
c. BIOS
3. When the diagnostic tool opens, select a language, select the type of diagnostic test you want to run,
and then follow the on-screen instructions.
Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in the following situations:
● HP PC Hardware Diagnostics UEFI is not included in the preinstall image.
● HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition.
● The hard drive is damaged.
NOTE: The HP PC Hardware Diagnostics UEFI download instructions are provided in English only, and you
must use a Windows computer to download and create the HP UEFI support environment because only .exe
files are provided.
Downloading the latest HP PC Hardware Diagnostics UEFI version

To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive:
2. Select Download HP Diagnostics UEFI, and then select Run.
Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products only)
NOTE: For some products, it may be necessary to download the software to a USB flash drive by using the
product name or number.
To download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a USB
flash drive:
Using HP PC Hardware Diagnostics UEFI 65

2. Enter the product name or number, select your computer, and then select your operating system.
3. In the Diagnostics section, follow the on-screen instructions to select and download the specific UEFI
Diagnostics version for your computer.
Using Remote HP PC Hardware Diagnostics UEFI settings (select

products only)
Remote HP PC Hardware Diagnostics UEFI is a firmware (BIOS) feature that downloads HP PC Hardware
Diagnostics UEFI to your computer. It can then execute the diagnostics on your computer, and it may upload
results to a preconfigured server. For more information about Remote HP PC Hardware Diagnostics UEFI, go
to http://www.hp.com/go/techcenter/pcdiags, and then select Find out more.
Downloading Remote HP PC Hardware Diagnostics UEFI

NOTE: HP Remote PC Hardware Diagnostics UEFI is also available as a Softpaq that can be downloaded to a
server.
Downloading the latest Remote HP PC Hardware Diagnostics UEFI version

To download the latest Remote HP PC Hardware Diagnostics UEFI version, follow these steps:
2. Select Download Remote Diagnostics, and then select Run.
Downloading Remote HP PC Hardware Diagnostics UEFI by product name or number

NOTE: For some products, it may be necessary to download the software by using the product name or
number.
To download HP Remote PC Hardware Diagnostics UEFI by product name or number, follow these steps:
2. Select Get software and drivers, select your type of product, enter the product name or number in the
search box that is displayed, select your computer, and then select your operating system.
3. In the Diagnostics section, follow the on-screen instructions to select and download the Remote UEFI
version for the product.
Customizing Remote HP PC Hardware Diagnostics UEFI settings

Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), you can perform the
following customizations:
● Set a schedule for running diagnostics unattended. You can also start diagnostics immediately in
interactive mode by selecting Execute Remote HP PC Hardware Diagnostics.
● Set the location for downloading the diagnostic tools. This feature provides access to the tools from the
HP website or from a server that has been preconfigured for use. Your computer does not require the
traditional local storage (such as a disk drive or USB flash drive) to run remote diagnostics.
66 Chapter 11 Using HP PC Hardware Diagnostics

● Set a location for storing the test results. You can also set the user name and password settings used for
uploads.
● Display status information about the diagnostics run previously.
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press f10 to enter Computer Setup.
2. Select Advanced, and then select Settings.
3. Make your customization selections.
4. Select Main, and then Save Changes and Exit to save your settings.
Your changes take effect when the computer restarts.
Using Remote HP PC Hardware Diagnostics UEFI settings (select products only) 67

12 Specifications
Input power
The power information in this section may be helpful if you plan to travel internationally with the computer.
The computer operates on DC power, which can be supplied by an AC or a DC power source. The AC power
source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered from a standalone DC
power source, it should be powered only with an AC adapter or a DC power source supplied and approved by
HP for use with this computer.
The computer can operate on DC power within the following specifications. The voltage and current for your
computer is located on the regulatory label.
Table 12-1 DC power specifications
Input Power Rating
Operating voltage and current 5 V dc @ 2 A / 12 V dc @ 3 A / 15 V dc @ 3 A – 45 W USB-C
5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 3.75 A / 15 V dc @ 3 A – 45
W USB-C
5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 3.75 A / 12 V dc @ 3.75 A /
15 V dc @ 3 A / 20 V dc @ 2.25 A – 45 W USB-C
5 V dc @ 3 A / 9 V dc @ 3 A / 12 V dc @ 5 A / 15 V dc @ 4.33 A / 20
V dc @ 3.25 A – 65 W USB-C
5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc
@ 4.33 A / 20 V dc @ 3.25 A – 65 W USB-C
5 V dc @ 3 A / 9 V dc @ 3 A / 10 V dc @ 5 A / 12 V dc @ 5 A / 15 V dc
@ 5 A / 20 V dc @ 4.5 A – 90 W USB-C
19.5 V dc @ 2.31 A – 45 W
19.5 V dc @ 3.33 A – 65 W
19.5 V dc @ 4.62 A – 90 W
19.5 V dc @ 6.15 A – 120 W
19.5 V dc @ 6.9 A – 135 W
19.5 V dc @ 7.70 A – 150 W
19.5 V dc @ 10.3 A – 200 W
19.5 V dc @ 11.8 A – 230 W
19.5 V dc @ 16.92 A – 330 W
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding
240 V rms.
68 Chapter 12 Specifications
Operating environment
Table 12-2 Operating environment specifications
Factor Metric U.S.
Temperature
Operating (writing to optical disc) 5°C to 35°C 41°F to 95°F
Nonoperating -20°C to 60°C -4°F to 140°F
Relative humidity (noncondensing)
Operating 10% to 90% 10% to 90%
Nonoperating 5% to 95% 5% to 95%
Maximum altitude (unpressurized)
Operating -15 m to 3,048 m -50 ft to 10,000 ft
Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft
Operating environment 69
13 Electrostatic discharge
Electrostatic discharge is the release of static electricity when two objects come into contact—for example,
the shock you receive when you walk across the carpet and touch a metal door knob.
A discharge of static electricity from fingers or other electrostatic conductors may damage electronic
components.
IMPORTANT: To prevent damage to the computer, damage to a drive, or loss of information, observe these
precautions:
● If removal or installation instructions direct you to unplug the computer, first be sure that it is properly
grounded.
● Keep components in their electrostatic-safe containers until you are ready to install them.
● Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
● Use nonmagnetic tools.
● Before handling components, discharge static electricity by touching an unpainted metal surface.
● If you remove a component, place it in an electrostatic-safe container.
70 Chapter 13 Electrostatic discharge

14 Accessibility
Accessibility
HP is working to weave diversity, inclusion and work/life into the fabric of our company, so it is reflected in
everything we do. Here are some examples of how we are putting differences to work to create an inclusive
environment focused on connecting people to the power of technology throughout the world.
Finding the technology tools you need

Technology can unleash your human potential. Assistive technology removes barriers and helps you create
independence at home, at work, and in the community. Assistive technology helps increase, maintain, and
improve the functional capabilities of electronic and information technology. For more information, see
Finding the best assistive technology on page 72.
Our commitment
HP is committed to providing products and services that are accessible for people with disabilities. This
commitment supports our company's diversity objectives and helps us ensure that the benefits of technology
are available to all.
Our accessibility goal is to design, produce, and market products and services that can be effectively used by
everyone, including people with disabilities, either on a stand-alone basis or with appropriate assistive
devices.
To achieve our goal, this Accessibility Policy establishes seven key objectives to guide our actions as a
company. All HP managers and employees are expected to support these objectives and their implementation
in accordance with their roles and responsibilities:
● Raise the level of awareness of accessibility issues within our company, and provide our employees with
the training they need to design, produce, market, and deliver accessible products and services.
● Develop accessibility guidelines for products and services, and hold product development groups
accountable for implementing these guidelines where competitively, technically, and economically
feasible.
● Involve people with disabilities in the development of accessibility guidelines, and in the design and
testing of products and services.
● Document accessibility features and make information about our products and services publicly
available in an accessible form.
● Establish relationships with leading assistive technology and solution providers.
● Support internal and external research and development that will improve assistive technology relevant
to our products and services.
● Support and contribute to industry standards and guidelines for accessibility.
International Association of Accessibility Professionals (IAAP)

IAAP is a not-for-profit association focused on advancing the accessibility profession through networking,
education, and certification. The objective is to help accessibility professionals develop and advance their
careers and to better enable organizations to integrate accessibility into their products and infrastructure.
Accessibility 71
HP is a founding member, and we joined to participate with other organizations to advance the field of
accessibility. This commitment supports our company’s accessibility goal of designing, producing, and
marketing products and services that can be effectively used by people with disabilities.
IAAP will make our profession strong by globally connecting individuals, students, and organizations to learn
from one another. If you are interested in learning more, go to http://www.accessibilityassociation.org to join
the online community, sign up for newsletters, and learn about membership options.
Finding the best assistive technology

Everyone, including people with disabilities or age-related limitations, should be able to communicate,
express themselves, and connect with the world using technology. HP is committed to increasing accessibility
awareness within HP and with our customers and partners. Whether it’s large fonts that are easy on the eyes,
voice recognition that lets you give your hands a rest, or any other assistive technology to help with your
specific situation—a variety of assistive technologies make HP products easier to use. How do you choose?
Assessing your needs

Technology can unleash your potential. Assistive technology removes barriers and helps you create
independence at home, at work, and in the community. Assistive technology (AT) helps increase, maintain,
and improve the functional capabilities of electronic and information technology.
You may choose from many AT products. Your AT assessment should allow you to evaluate several products,
answer your questions, and facilitate your selection of the best solution for your situation. You will find that
professionals qualified to do AT assessments come from many fields, including those licensed or certified in
physical therapy, occupational therapy, speech/language pathology, and other areas of expertise. Others,
while not certified or licensed, may also provide evaluation information. You will want to ask about the
individual's experience, expertise, and fees to determine if they are appropriate for your needs.
Accessibility for HP products

The following links provide information about accessibility features and assistive technology, if applicable,
included in various HP products. These resources will help you select the specific assistive technology
features and product(s) most appropriate for your situation.
● HP Elite x3–Accessibility Options (Windows 10 Mobile)
● HP PCs–Windows 7 Accessibility Options
● HP PCs–Windows 8 Accessibility Options
● HP PC’s–Windows 10 Accessibility Options
● HP Slate 7 Tablets–Enabling Accessibility Features on Your HP Tablet (Android 4.1/Jelly Bean)
● HP SlateBook PCs–Enabling Accessibility Features (Android 4.3, 4.2/Jelly Bean)
● HP Chromebook PCs–Enabling Accessibility Features on Your HP Chromebook or Chromebox (Chrome
OS)
● HP Shopping–peripherals for HP products
If you need additional support with the accessibility features on your HP product, see Contacting support
on page 77.
Additional links to external partners and suppliers that may provide additional assistance:
● Microsoft Accessibility information (Windows 7, Windows 8, Windows 10, Microsoft Office)
● Google Products accessibility information (Android, Chrome, Google Apps)
72 Chapter 14 Accessibility
● Assistive Technologies sorted by impairment type
● Assistive Technologies sorted by product type
● Assistive Technology vendors with product descriptions
● Assistive Technology Industry Association (ATIA)
Standards and legislation

Standards
Section 508 of the Federal Acquisition Regulation (FAR) standards was created by the US Access Board to
address access to information and communication technology (ICT) for people with physical, sensory, or
cognitive disabilities. The standards contain technical criteria specific to various types of technologies, as well
as performance-based requirements which focus on functional capabilities of covered products. Specific
criteria cover software applications and operating systems, web-based information and applications,
computers, telecommunications products, video and multi-media, and self-contained closed products.
Mandate 376 – EN 301 549

The EN 301 549 standard was created by the European Union within Mandate 376 as the basis for an online
toolkit for public procurement of ICT products. The standard specifies the functional accessibility
requirements applicable to ICT products and services, together with a description of the test procedures and
evaluation methodology for each accessibility requirement.
Web Content Accessibility Guidelines (WCAG)

Web Content Accessibility Guidelines (WCAG) from the W3C's Web Accessibility Initiative (WAI) helps web
designers and developers create sites that better meet the needs of people with disabilities or age-related
limitations. WCAG advances accessibility across the full range of web content (text, images, audio, and video)
and web applications. WCAG can be precisely tested, is easy to understand and use, and allows web
developers flexibility for innovation. WCAG 2.0 has also been approved as ISO/IEC 40500:2012.
WCAG specifically addresses barriers to accessing the web experienced by people with visual, auditory,
physical, cognitive, and neurological disabilities, and by older web users with accessibility needs. WCAG 2.0
provides characteristics of accessible content:
● Perceivable (for instance, by addressing text alternatives for images, captions for audio, adaptability of
presentation, and color contrast)
● Operable (by addressing keyboard access, color contrast, timing of input, seizure avoidance, and
navigability)
● Understandable (by addressing readability, predictability, and input assistance)
● Robust (for instance, by addressing compatibility with assistive technologies)
Legislation and regulations

Accessibility of IT and information has become an area of increasing legislative importance. This section
provides links to information about key legislation, regulations, and standards.
● United States
● Canada
● Europe
Standards and legislation 73

● United Kingdom
● Australia
● Worldwide
United States
Section 508 of the Rehabilitation Act specifies that agencies must identify which standards apply to the
procurement of ICT, perform market research to determine the availability of accessible products and
services, and document the results of their market research. The following resources provide assistance in
meeting Section 508 requirements:
● www.section508.gov
● Buy Accessible
The U.S. Access Board is currently updating the Section 508 standards. This effort will address new
technologies and other areas where the standards need to be modified. For more information, go to Section
508 Refresh.
Section 255 of the Telecommunications Act requires telecommunications products and services to be
accessible to people with disabilities. FCC rules cover all hardware and software telephone network
equipment and telecommunications equipment used in the home or office. Such equipment includes
telephones, wireless handsets, fax machines, answering machines, and pagers. FCC rules also cover basic and
special telecommunications services, including regular telephone calls, call waiting, speed dialing, call
forwarding, computer-provided directory assistance, call monitoring, caller identification, call tracing, and
repeat dialing, as well as voice mail and interactive voice response systems that provide callers with menus of
choices. For more information, go to Federal Communication Commission Section 255 information.
21st Century Communications and Video Accessibility Act (CVAA)

The CVAA updates federal communications law to increase the access of persons with disabilities to modern
communications, updating accessibility laws enacted in the 1980s and 1990s to include new digital,
broadband, and mobile innovations. Regulations are enforced by the FCC and documented as 47 CFR Part 14
and Part 79.
● FCC Guide on the CVAA
Other U.S. legislation and initiatives
● Americans with Disabilities Act (ADA), Telecommunications Act, the Rehabilitation Act and others
Canada
The Accessibility for Ontarians with Disabilities Act was established to develop and implement accessibility
standards to make goods, services, and facilities accessible to Ontarians with disabilities and to provide for
the involvement of persons with disabilities in the development of the accessibility standards. The first
standard of the AODA is the customer service standard; however, standards for transportation, employment,
and information and communication are also being developed. The AODA applies to the Government of
Ontario, the Legislative Assembly, every designated public sector organization, and to every other person or
organization that provides goods, services, or facilities to the public or other third parties and that has at
least one employee in Ontario; and accessibility measures must be implemented on or before January 1,
2025. For more information, go to Accessibility for Ontarians with Disability Act (AODA) .
Europe
EU Mandate 376 ETSI Technical Report ETSI DTR 102 612: "Human Factors (HF); European accessibility
requirements for public procurement of products and services in the ICT domain (European Commission
Mandate M 376, Phase 1)" has been released.
Background: The three European Standardization Organizations have set up two parallel project teams to
carry out the work specified in the European Commission "Mandate 376 to CEN, CENELEC and ETSI, in Support
of Accessibility Requirements for Public Procurement of Products and Services in the ICT Domain."
ETSI TC Human Factors Specialist Task Force 333 has developed ETSI DTR 102 612. Further details about the
work performed by STF333 (e.g., Terms of Reference, specification of the detailed work tasks, time plan for
the work, previous drafts, listing of comments received and means to contact the task force) can be found at
the Special Task Force 333.
The parts relating to the assessment of suitable testing and conformity schemes were carried out by a
parallel project, detailed in CEN BT/WG185/PT. For further information, go to the CEN project team website.
The two projects are closely coordinated.
● CEN project team
● European Commission mandate for e-accessibility (PDF 46KB)
United Kingdom
The Disability Discrimination Act of 1995 (DDA) was enacted to ensure that websites are accessible to blind
and disabled users in the United Kingdom.
● W3C UK Policies
Australia
The Australian government has announced their plan to implement Web Content Accessibility Guidelines 2.0.
All Australian government websites will require Level A compliance by 2012, and Double A by 2015. The new
standard replaces WCAG 1.0, which was introduced as a mandated requirement for agencies in 2000.
Worldwide
● JTC1 Special Working Group on Accessibility (SWG-A)
● G3ict: The Global Initiative for Inclusive ICT
● Italian accessibility legislation
● W3C Web Accessibility Initiative (WAI)
Standards and legislation 75

Useful accessibility resources and links
The following organizations may be good resources for information about disabilities and age-related
limitations.
NOTE: This is not an exhaustive list. These organizations are provided for informational purposes only. HP
assumes no responsibility for information or contacts you may encounter on the Internet. Listing on this page
does not imply endorsement by HP.
Organizations
● American Association of People with Disabilities (AAPD)
● The Association of Assistive Technology Act Programs (ATAP)
● Hearing Loss Association of America (HLAA)
● Information Technology Technical Assistance and Training Center (ITTATC)
● Lighthouse International
● National Association of the Deaf
● National Federation of the Blind
● Rehabilitation Engineering & Assistive Technology Society of North America (RESNA)
● Telecommunications for the Deaf and Hard of Hearing, Inc. (TDI)
● W3C Web Accessibility Initiative (WAI)
Educational institutions
● California State University, Northridge, Center on Disabilities (CSUN)
● University of Wisconsin - Madison, Trace Center
● University of Minnesota computer accommodations program
Other disability resources

● ADA (Americans with Disabilities Act) Technical Assistance Program
● Business & Disability network
● EnableMart
● European Disability Forum
● Job Accommodation Network
● Microsoft Enable
● U.S. Department of Justice - A Guide to disability rights Laws
HP links
Our contact webform
HP comfort and safety guide
HP public sector sales
Contacting support
NOTE: Support is in English only.
● Customers who are deaf or hard of hearing that have questions about technical support or accessibility
of HP products:
– Use TRS/VRS/WebCapTel to call (877) 656-7058 Monday through Friday, 6 a.m. to 9 p.m. Mountain
Time.
● Customers with other disabilities or age-related limitations who have questions about technical support
or accessibility of HP products, choose one of the following options:
– Call (888) 259-5707 Monday through Friday, 6 a.m. to 9 p.m. Mountain Time.
– Complete the Contact form for people with disabilities or age-related limitations.
Contacting support 77
Index
A downloading an update 60 corporate WLAN connection 19

accessibility 71 updating 60 critical battery level 39
accessibility needs assessment 72 Bluetooth device 18, 20 customer support, accessibility 77
administrator password 43 Bluetooth label 17
airplane mode key 18 boot order D
antivirus software 50 changing using the f9 prompt data transfer 34
assistive technology (AT) 61 Disk Cleanup software 53
finding 72 boot order, changing 58 Disk Defragmenter software 53
purpose 71 bottom 17 display components 6
AT (assistive technology) buttons DreamColor sensor, identifying 8
finding 72 center pointing stick 7 DriveLock
purpose 71 left Touchpad 7 description 47
audio 29 power 10 disabling 49
adjusting volume 13 right Touchpad 8 enabling 48
HDMI 32 DriveLock master password
headphones 29 C changing 49
headsets 30 call answer light 9 DriveLock password
sound settings 30 call end light 9 changing 49
speakers 29 camera 6 entering 49
audio-out (headphone)/audio-in using 29 setting 47
(microphone) combo jack, camera light, identifying 6
identifying 3 camera privacy shutter, identifying E
Automatic DriveLock 6 electrostatic discharge 70
disabling 46 camera(s) esc key, identifying 11
enabling 46 identifying 6 external power, using 40
Automatic Drivelock 46 caps lock light, identifying 9
Automatic DriveLock password caring for your computer 54 F
entering 47 Center Touchpad button, factory-sealed battery 40
identifying 7 fingerprint reader 51
B cleaning your computer 54 fingerprint reader, identifying 10
backup, creating 57 components fingerprints, registering 50
backups 57 bottom 14 firewall software 50
battery display 6 fn key, identifying 11
conserving power 39 keyboard area 7 fn lock light, identifying 9
discharging 39 left side 5 four-finger tap Touchpad gesture
factory-sealed 40 right side 3 26
finding information 39 components, cover 15
low battery levels 39 Computer Setup G
resolving low battery level 40 BIOS administrator password 44 GPS 20
battery charge 39 navigating and selecting 59
battery information, finding 39 restoring factory settings 59 H
battery light 4 starting 59 hardware, locating 3
battery power 38 computer setup 59 HDMI audio, configuring 32
BIOS connecting to a WLAN 19 HDMI port
determining version 60 connector, power 4 connecting 32
78 Index
HDMI port, identifying 4 using 12 num lock 9
headphones, connecting 29 wireless 13 power 9
headsets, connecting 30 icon keys RJ-45 (network) 5
Hibernation identifying 12 sharing or presenting 9
exiting 37 initiating Sleep and Hibernation 36 wireless 9
initiated during critical battery input power 68 low battery level 39
level 39 integrated numeric keypad,
initiating 37 identifying 11 M
high-definition devices, connecting internal microphones, identifying 6 maintenance
32, 34 International Association of Disk Cleanup 53
hot keys Accessibility Professionals 71 Disk Defragmenter 53
break 12 updating programs and drivers
insert 12 J 54
microphone mute 13 jacks managing power 36
pause 12 audio-out (headphone)/audio-in memory card reader, identifying 5
programming query 12 (microphone) combo 3 microphone mute key, identifying
scroll lock 12 network 5 13
using 12 RJ-45 (network) 5 microphone mute light, identifying
HP 3D DriveGuard 54 9
HP Assistive Policy 71 K Miracast 34
HP Client Security 51 keyboard and optional mouse mute volume icon key 13
HP Device as a Service (HP DaaS) 51 using 28
HP Fast Charge 38 keyboard backlight N
HP LAN-Wireless Protection 22 icon key 12 network jack, identifying 5
HP MAC Address Pass Through 23 keypad next track icon key 13
HP PC Hardware Diagnostics UEFI integrated numeric 11 NFC 20
downloading 65 keys NFC tapping area, identifying 8
starting 65 esc 11 num lock light 9
using 64 fn 11
HP PC Hardware Diagnostics Windows icon 12 O
downloading 63 num lock 11 one-finger slide touch screen
installing 64 Windows 11 gesture 28
using 63 operating environment 69
HP Recovery media L
recovery 58 labels P
HP resources 2 Bluetooth 17 passwords
HP Touchpoint Manager 51 regulatory 17 administrator 43
serial number 16 BIOS administrator 44
I service 16 user 43
Icon keys wireless certification 17 pause icon key 13
keyboard backlight 12 WLAN 17 play icon key 13
mute 13 left side components 5 pointing stick, identifying 7
next 13 lights ports
pause 13 AC adapter and battery 4 HDMI 4, 32
play 13 battery 4 USB SuperSpeed 4, 5
privacy screen 12 call answer 9 USB SuperSpeed port with HP
screen brightness 12 call end 9 Sleep and Charge 5
speaker volume 13 camera 6 USB Type-C 35
stop 13 caps lock 9
switch screen image 13 fn lock 9
microphone mute 9
Index 79
USB Type-C power connector and RJ-45 (network) lights, identifying three-finger swipe Touchpad
Thunderbolt ports with HP Sleep 5 gesture 27
and Charge 4 three-finger tap Touchpad gesture
USB Type-C Thunderbolt 31 S 26
power screen brightness Icon keys 12 Thunderbolt ports with HP Sleep and
battery 38 Section 508 accessibility standards Charge
external 40 73, 74 identifying USB Type-C 4
power button, identifying 10 security cable slot, identifying 5 Thunderbolt, connecting USB Type-
power connector serial number, computer 16 C 31
identifying 4 service labels, locating 16 touch screen gestures
identifying USB Type-C 4 setup utility one-finger slide 28
power icon, using 38 navigating and selecting 59 Touchpad
power lights 9 restoring factory settings 59 buttons 7
power settings, using 38 sharing or presenting light, using 24
precision touchpad identifying 9 Touchpad and touch screen gestures
using 24 shipping the computer 55 tap 24
precision touchpad gestures shortcut keys, using 11 two-finger pinch zoom 25
four-finger tap 26 shutdown 37 Touchpad buttons
three-finger swipe 27 Sleep identifying 7, 8
three-finger tap 26 exiting 36 Touchpad gestures
two-finger slide 25 initiating 36 four-finger tap 26
two-finger tap 25 Sleep and Hibernation, initiating 36 three-finger swipe 27
privacy screen icon key, identifying slots three-finger tap 26
12 security cable 5 two-finger slide 25
privacy shutter, camera 6 smart card 3 two-finger tap 25
product name and number, smart card slot, identifying 3 Touchpad zone, identifying 7
computer 16 software TPM settings 61
public WLAN connection 19 antivirus 50 transfer data 34
Disk Cleanup 53 traveling with the computer 17, 55
R Disk Defragmenter 53 turning off the computer 37
recovery 57 firewall 50 two-finger pinch zoom Touchpad and
discs 58 software installed, locating 3 touch screen gesture 25
HP Recovery partition 58 software updates, installing 51 two-finger slide Touchpad gesture
media 58 sound. See audio 25
USB flash drive 58 sound settings, using 30 two-finger tap Touchpad gesture 25
recovery media speaker volume Icon keys 13
creating using HP Cloud Recovery speakers U
Download Tool 57 connecting 29 unresponsive system 37
creating using Windows tools 57 speakers, identifying 10 updating programs and drivers 54
regulatory information standards and legislation, USB SuperSpeed port with HP Sleep
regulatory label 17 accessibility 73 and Charge, identifying 5
wireless certification labels 17 stop icon key 13 USB SuperSpeed port, identifying 4,
Remote HP PC Hardware Diagnostics Sure Start 5
UEFI settings using 62 USB Type-C port, connecting 31, 35
customizing 66 switch screen image icon key 13 USB Type-C power connector and
using 66 system restore point, creating 57 Thunderbolt ports with HP Sleep
resources, accessibility 76 and Charge, identifying 4
restoring 57 T user password 43
right side components 3 tap Touchpad and touch screen using the keyboard and optional
RJ-45 (network) jack, identifying 5 gesture 24 mouse 28
80 Index
using the Touchpad 24
V
vent, identifying 14
video 30
HDMI port 32
Thunderbolt Port device 31
USB Type-C 31
wireless displays 34
volume
adjusting 13
mute 13
W
Windows
backup 57
recovery media 57
system restore point 57
Windows Hello
using 50
Windows key, identifying 11
Windows tools, using 57
wireless antennas, identifying 6
wireless button 18
wireless certification label 17
wireless controls
button 18
operating system 18
wireless icon key 13
wireless key 18
wireless light 18
wireless light, identifying 9
wireless network (WLAN)
connecting 19
corporate WLAN connection 19
functional range 19
public WLAN connection 19
WLAN antennas, identifying 6
WLAN device 17
WLAN label 17
WWAN antennas, identifying 6
WWAN device 18, 19
Index 81

HP Zbook G6 Manual

Uploaded by

Document Informationclick to expand document informationHP G6 User Guide

Document Informationclick to expand document information

Copyright:

Available Formats

HP Zbook G6 Manual

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HP Zbook G6 Manual

Uploaded by

Copyright:

Available Formats

User Guide

© Copyright 2019 HP Development Company, Product notice Software terms

First Edition: July 2019

Document Part Number: L58962-001

1 Getting started ............................................................................................................................................. 1

3 Network connections ................................................................................................................................... 18

4 Navigating the screen .................................................................................................................................. 24

5 Entertainment features ............................................................................................................................... 29

6 Managing power .......................................................................................................................................... 36

9 Backing up, restoring, and recovering ........................................................................................................... 57

10 Computer Setup (BIOS), TPM, and HP Sure Start ............................................................................................ 59

11 Using HP PC Hardware Diagnostics .............................................................................................................. 63

13 Electrostatic discharge ............................................................................................................................... 70

Setup Instructions ● Overview of computer setup and features

HP support ● Online chat with an HP technician

For HP support, go to http://www.hp.com/support, and ● Support telephone numbers

● Maintenance and service guides

● HP service center locations

Safety & Comfort Guide ● Proper workstation setup

IMPORTANT: You must be connected to the Internet

▲ Select the Start button, select HP Help and Support,

Limited Warranty* ● Specific warranty information about this computer

To access this document:

▲ Select the Start button, select HP Help and Support,

IMPORTANT: You must be connected to the Internet

2 Chapter 1 Getting started

A list displays all the devices installed on your computer.

Table 2-1 Right-side components and their descriptions

(1) Smart card reader Supports optional smart cards.

WARNING! To reduce the risk of personal injury, adjust the

● Select the Start button, select HP Help and Support, and

Connect a display device that has a USB Type-C connector,

NOTE: Your computer may also support a Thunderbolt

NOTE: Cables and/or adapters (purchased separately) may be

(6) Power connector Connects an AC adapter.

(7) Battery light When AC power is connected:

● White: The battery charge is greater than 90 percent.

● Amber: The battery charge is from 0 to 90 percent.

● Off: The battery is not charging.

When AC power is disconnected (battery not charging):

● Blinking amber: The battery has reached a low battery

● Off: The battery is not charging.

Table 2-2 Left-side components and their descriptions

NOTE: The security cable is designed to act as a deterrent, but

(2) RJ-45 (network) jack/status lights Connects a network cable.

● Green (left): The network is connected.

● Amber (right): Activity is occurring on the network.

▲ Press in on the card, and then remove it from the memory

Table 2-3 Display components and their descriptions

NOTE: Camera functions vary depending on the camera hardware

(4) Internal microphones (2) Record sound.

● To unblock the camera, slide the shutter to the right.

● To block the camera, slide the shutter to the left.

To access this guide:

To adjust Touchpad settings and gestures, or to turn off the Touchpad:

2. Using an external mouse, click the Touchpad button.

Table 2-4 Touchpad components and their descriptions

(1) Pointing stick Moves the pointer on the screen.