SecureSync M-Code
SecureSync M-Code
Mission Partner
SecureSync® M-Code
Resilient Time and Frequency Synchronization Platform
• Military M-code and P(Y)-code SecureSync® M-Code combines Orolia’s precision time and frequency technology with
receiver, with direct acquisition and an ultra-secure M-code GPS receiver. SecureSync M-code includes the latest generation
continuous tracking of both L1 and of modernized security architecture, modernized anti-spoofing and anti-jamming for
L2 GPS satellite frequencies. GPS-degraded environments, operations in mixed P(Y)-code and M-code constellations,
• Multi-GNSS synchronization (GPS, accelerated Direct-Y and Direct-M code acquisitions, and Over-The-Air-Rekeying (OTAR).
Galileo, GLONASS, BeiDou, QZSS) SecureSync M-code provides better than 41 dB J/S while tracking (state 5) and better than
• Alternate signal options 54 dB J/S (state 3) while providing cryptographic key retention without battery backup.
• BroadShield GPS jamming and Mission-critical military applications will benefit from SecureSync M-Code’s extreme reliability,
spoofing detection option security, and flexibility. An important advantage of SecureSync M-Code is its ruggedized
• Internal precision timekeeping via shock and vibration-tested chassis, designed to meet MIL-STD-810F for environmental
TCXO, OCXO or Rb oscillator performance. The base unit provides an extremely accurate 1PPS timing signal aligned to a
10 MHz frequency signal without any 10 MHz phase discontinuity. An assortment of internal
• Supports a wide variety of available
input/output signals oscillator options is available to fulfill a broad range of requirements for holdover and phase
noise.
• Modular (configure-to-order)
ruggedized shock and vibration In addition to 1PPS and 10Mhz signals, the base unit provides two Gigabit Ethernet ports
tested chassis (one RH45, one SFP) enabling flexible network synchronization, along with configurable
• Exceptional operating temperature Input/Output interfaces (DCLS, RS232/RS485, IRIG AM). Up to 5 additional input/output
range of -20°C to +65°C modules can be added to each SecureSync M-Code to cater it to your specific needs. Choose
from a vast selection of option cards to add to your configuration of timing signals, including
• High bandwidth NTP
additional 1PPS or time code (IRIG, ASCII, HaveQuick), frequency outputs (10 MHz, 5 MHz,
• PTP v2 Master/Slave
2.048 MHz, or 1.544 MHz), telecom T1/E1 data rates, multi-port NTP, and PTP. Modules can
• Dual Gb Ethernet also be custom designed to meet the exact specifications of any military program.
• Secure network management:
SecureSync M-Code is a security-hardened network appliance designed to meet rigorous
Enable or disable protocols
network security standards and best practices, including VLAN support. It ensures accurate
for encryption, authentication,
timing through multiple references, tamper-proof management, and extensive logging.
authorization and accounting
Robust network protocols are used to allow for easy but secure configuration. Features can
• REST API management be enabled or disabled based on your network policies. Installation is aided by DHCP (IPv4),
• Alert notifications via SNMP traps AUTOCONF (IPv6), and a front-panel keypad and display. The 1 RU chassis is powered by AC
and email alert on an IEC60320 connector. DC power is also available as a primary source or as a back-up
• Industry-leading five year limited to standard AC power. Additionally, SecureSync includes an optional, dual (redundant), hot
warranty swappable power supply for both AC and DC configurations.
SecureSync® M-Code
Your Resilient PNT
Mission Partner