FFHD Series

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

cat. no.

FFHD SERIES

Heavy Duty Flush Floor Duct Standard Size


■■ Fully accessible system suitable for heavy commercial
AT A GLANCE… and industrial applications.
■■ Folded metal body with aluminium trim. ■■ Galvanised steel duct body with aluminium edge trims.
■■ Finishes flush with floor. ■■ Removable screw fixed 5 mm thick mild steel covers.
■■ Suitable for heavy commercial & industrial Covers are pre-punched and countersunk.
applications. ■■ Supplied with leveling / joining brackets prefitted to duct
■■ Flush floor cross and tee junction boxes body.
available. ■■ Leveling / joining brackets provide facility to adjust duct
■■ Leveling plate aids duct height adjustment. height during installation.
■■ Suits ECD® floor boxes.
■■ A full range of flush floor cross-over and tee junction
boxes are available.
■■ This product has been examined in accordance with
“Easy as ECD®” AS 3000 and A.C.M.A. requirements.

SECTION VIEW – FFHD SERIES


W

5mm Thick Lid

POWER VOICE/DATA
D

STANDARD SIZE RANGE


CAT. NO DUCT SIZE RECESS SIZE
(W X D)
FFHD11535 115 x 35 mm 190 x 45 mm
FFHD22535 225 x 35 mm 300 x 45 mm
FFHD22550 225 x 50 mm 300 x 60 mm
FFHD35065 350 x 65 mm 420 x 75 mm
*Other sizes available to order

ECD
® Electric Cable Duct Systems P/L
Phone: 1300 123 ECD (323) Fax: 1300 372 825
Email: [email protected] website: www.ecd.net.au
ESTABLISHED 1979 ABN 80005544105

JUNE2018
© COPYRIGHT 2015
Electric Cable Duct Systems P/L

RECESS IN CONCRETE FLOOR


5mm Thick Lid

SHEATHED POWER
VOICE/DATA
CABLES

LEVELING SCREW
LEVELING PLATE
SECTION VIEW GROUT TO BE FILLED BY BUILDER
SLAB/FLOOR BASE

INSTALLATION FFHD SERIES


■■ Installed into a preformed recess provided by the builder (see front page). Once duct is installed and levelled to floor
level, the builder is required to grout the location.

SUGGESTED SPECIFICATION
■■ The contractor shall allow to supply and install Electric Cable Duct Systems P/L Cat No. FFHD (see front page), Flush
Floor Duct System, generally in accordance with the manufacturers technical publication and as identified on the plans
and specifications of the project.
■■ The body shall be folded steel with aluminium trim with removable pre-punched and countersunk, galvanised steel
covers.
■■ The system shall be a complete and workable system including levelling bracket, stop ends, access inspection ports,
and floor outlet boxes.

PARTS LIST
DESCRIPTION PART NO. PART NO. PART NO. PART NO.
Duct body – 2.4m lengths FFHD11535 FFHD22535 FFHD22550 FFHD35065
Duct cover – 1.2m lengths FFHD11535C FFHD22535C FFHD22550C FFHD35065C
Cross-over junction box FFHD11535X FFHD22535X FFHD22550X FFHD35065X
Tee junction box FFHD11535T FFHD22535T FFHD22550T FFHD35065T
90 degree bend junction FFHD11535B FFHD22535B FFHD22550B FFHD35065B
Access inspection ports FFHD11535AP FFHD22535AP FFHD22550AP FFHD35065AP
Stop End FFHD11535SE FFHD22535SE FFHD22550SE FFHD35065SE
Above Floor Box (Low) AFB70 AFB70 AFB70 AFB70
Above Floor Box (High) AFB20 AFB20 AFB20 AFB20

You might also like