Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #1

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 01 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #2

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 02 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #3

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 03 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #4

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 04 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #5

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 05 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #6

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 06 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #7

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 07 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #8

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 08 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #9

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 09 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #10

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 10 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #11

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 11 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #12

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 12 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #13

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 13 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Faculty of Engineering, Science and Technology (FEST), Indus University, Karachi

ASSESSMENT OF LAB TASK #14

Course Teacher: (COURSE CODE) & TITLE: Activity Marks: 02 Student ID:
Engr. Ali Zain Ul Abdeen ET 323(A) Switch Gear and Protective Weightage Marks:4%
Device LAB
Semester: 5th Lab Number: 14 Student Name:
Knowledge Area / Sub Area (WK): SK-6 Offered In: Fall 2023 Lab Venue: Switchgear Protection Lab
For the Batch: Fall 2021 Schedule: Thursday (19:15 to 21:30)
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
Domain: Psychomotor Program Learning Outcome:
Course Learning Outcomes (CLO): CLO-1 Level: P7 (Acting Pure) PLO-3 (Design/Development of
Solutions)
RUBRICS FOR LAB TASK PERFROMANCE
Performance Unsatisfactory Partially Satisfactory Satisfactory Obtained
Remarks As Per Rubric
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks
Incapable of selecting relevant Needs guidance to select relevant
1. Lab Task/ Selects relevant equipment to the
equipment to conduct the equipment to the experiment and to
Procedure experiment, develops setup diagrams of
experiment, equipment connection develop equipment connection or wiring
Realization equipment connections or wiring.
or wiring diagrams. diagrams.
Does not know how to use related Uses related hardware/software tools
2. Utilization of Uses related hardware/software tools to
hardware/software tools to collect to collect and analyse data with minor
Lab Tools collect and analyse data effectively.
and analyse data. error.
3. Lab Task Unable to calibrate appropriate Calibrates equipment, examines Does proper calibration of equipment,
Performed equipment and equipment equipment moving parts, and operates carefully examines equipment moving parts,
operation is substantially wrong. the equipment with minor error. and ensures smoothoperation& process.

4. Lab Safety Disregards safety rules and Observes safety rules and procedures Respectfully and carefully observes safety
Precautions procedures. with minor deviation. rules and
Does not know how to plan data
Plans data collection to achieve Plans data collection to achieve
5. Experimental collection to achieve experimental
experimental objectives, and collects experimental objectives, and conducts an
Data Collection goals; data collected is
complete data with minor error. orderlyand a complete data collection.
incomplete and contain errors.
Unable to conductsimple
Conducts simple computations and
statistical analysis on collected Accurately conducts simple computations
statistical analysis using collected data
data; noattempt to correlate and statistical analysis using collected
6. Experimental with minor error; reasonably
experimental results with known data; correlates experimental results to
Data Analysis correlates experimental results to
theoretical values; incapable of known theoreticalvalues; accounts for
known theoretical values; attempts to
explaining measurement errors or measurement errors and parameters that
measure errors and parameters that
parameters that affect the affect experimental results.
affect experimental results.
experimental results.
Weightage Marks Obtained Total Marks Obtained

Lab Instructor Name: Engr. Ali Zain Ul Abdeen Signature & Date: __________________________
 Department of Electrical Engineering, FEST, Indus University, Karachi

Course Teacher: ASSESSMENT ACTIVITY Activity Marks: 3 Student ID:

Engr. Ali Zain Ul Abdeen OPEN ENDED LAB (OEL-1) %age out of 50 Marks: 6%
COURSE CODE) & TITLE: Semester: 5th Student Name:
Knowledge Area / Sub Area (WK): SK-6 ET 323(A) Switch Gear and Offered In: Fall 2023
For the Batch: Fall 2021
Protective Device LAB
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
CLO/COs (Course Outcomes): CLO-1 Domain: Psychomotor Program Outcome:
Level: P7 (Acting Pure) PLO-3 (Design/Development of Solutions)

RUBRICS FOR OEL 1

Performance Unsatisfactory Partially Satisfactory Satisfactory
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks Obtained
Incapable of selecting relevant method to solve Needs guidance to select relevant method to solve Selects relevant method to solve an open-ended
1. Method of an
an open-ended problem related to an open-ended engineering problem related to engineering problem related to communication
Open-Ended Lab
communication system design communication system design system design

2. Working of Open- OEL hardware/simulation is incomplete and is OEL hardware/Simulation is partially complete and OEL hardware/Simulation is complete and is
Ended Lab not producing desired results is producing partially satisfactory results producing desired results

Answers less the 25% the questions and has no Answers 50% of the questions and has little Answers 90% of the questions and has complete
3. Discussion of
understanding about the mechanism and understanding about the mechanism and procedure understanding about the mechanism and
Results
procedure of project of project procedure of project

Lab Instructor Name: Engr. Ali Zain Ul Abdeen

Signature & Date: _____________________________

 Department of Electrical Engineering, FEST, Indus University, Karachi

Course Teacher: ASSESSMENT ACTIVITY Activity Marks: 3 Student ID:

Engr. Ali Zain Ul Abdeen OPEN ENDED LAB (OEL-2) %age out of 50 Marks: 6%
COURSE CODE) & TITLE: Semester: 5th Student Name:
Knowledge Area / Sub Area (WK): SK-6 ET 323(A) Switch Gear and Offered In: Fall 2023
For the Batch: Fall 2021
Protective Device LAB
OBE ATTAINMENT (Course): OBE ATTAINMENT(Taxonomy): OBE ATTAINMENT (PLO) Section:
CLO/COs (Course Outcomes): CLO-2 Domain: Psychomotor Program Outcome:
Level: P4 (Mechanism) PLO-3 (Design/Development of Solutions)

RUBRICS FOR OEL 2

Performance Unsatisfactory Partially Satisfactory Satisfactory
Parameter (0-1) Marks (2-3) Marks (4-5) Marks Marks Obtained
Incapable of selecting relevant method to solve Needs guidance to select relevant method to solve Selects relevant method to solve an open-ended
1. Method of an
an open-ended problem related to an open-ended engineering problem related to engineering problem related to communication
Open-Ended Lab
communication system design communication system design system design

2. Working of Open- OEL hardware/simulation is incomplete and is OEL hardware/Simulation is partially complete and OEL hardware/Simulation is complete and is
Ended Lab not producing desired results is producing partially satisfactory results producing desired results

Answers less the 25% the questions and has no Answers 50% of the questions and has little Answers 90% of the questions and has complete
3. Discussion of
understanding about the mechanism and understanding about the mechanism and procedure understanding about the mechanism and
Results
procedure of project of project procedure of project

Lab Instructor Name: Engr. Ali Zain Ul Abdeen

Signature & Date: _____________________________