2nd year UG Engg & Tech. Jharkhand University Of Technology 2nd year UG Engg & Tech.

Technology 2nd year UG Engg & Tech. Jharkhand University Of Technology

MEASUREMENTAND INSTRUMENTATION Electronic Display Device, Digital Voltmeters, Digital Energy meter, CRO, measurement of
voltage and frequency, Lissajous Patterns, Plotting B-H curve of a magnetic material, Wave
Course Code- EE402 Analyzers, Harmonic Distortion Analyzer. Digital Energy Meter. Measurements of R, L and
C.Digital Multi-meter, True RMS meters, Clamp-on meters, Meggers.Digital Storage
Oscilloscope.
Module I: Measuring System Fundamentals:

Absolute standards (International, Primary, Secondary, and Working standards),True Value, Text Books:
Errors(Gross, Systematic and Random); Static Characteristic of instruments( Accuracy, Precision,
Sensitivity, Resolution and threshold).Classification of Instruments (based upon mode of 1. W.D. Coopers and Helfrick, Modern Electronic instrumentation and Measurements Techniques,
measurement- Indicating , Recording and Integrating Instruments), Generalized Instrument ( block Prentice Hall of India Pvt. Ltd,
diagram and description of various blocks ), the three forces in an electromechanical indicating 2. E.W. Gowlding and F.C.Widdis, Electrical Measurements and Measuring Instruments 5/e, Wheeler
instrument ( deflecting controlling and damping forces and the interplay between them), Publications.
Comparison between gravity and spring(Qualitative Study) . Errors in Measurements. Basic 3. U. A. Bakshi, A. V. Bakshi: Electrical Measurements and Instrumentation, Technical Publications.
statistical analysis applied to measurements: Mean, Standard Deviation, Six-sigma estimation, Cp,
Cpk
Reference Books
Module II: Analog Ammeters, Voltmeters and Watt meters:
1. A. K. Sawhney: A course in Electrical Measurements Electronic Measurements Instrumentation, Edition
11, Dhanpat Rai and Sons,
PMMC and MI Instruments, Construction, Torque Equation, Range Extension, Effect of
2. J. B. Gupta: A course in Electrical and Electronic Measurements and Instrumentation, 13/E, Kataria
temperature, Classification, Errors, Advantages and Disadvantages. Analog Wattmeters Power
and Sons.
Factor Meters and Energy Meter Power and Power Factor, Electrodynamometer type wattmeter,
power factor meter, Construction, theory, Shape of scale, torque equation, Advantages and
disadvantages, active and reactive power measurement in single phase, Measurement in three
phase. Single phase induction type energy meters, construction, theory, Operation, lag adjustments, --------------------------------------------------------------------------------------------------------------------------------
Max Demand meters/indicators, Measurement of VAH and VARh. ------------------------------------------------------------------------------------------------------

Module III: DC and AC Bridges:

Measurement of resistance, Wheatstone Bridge, Kelvin’s Bridge, Kelvin’s Double Bridge, ANALOG ELECTRONICS AND CIRCUITS
Measurement of inductance, Capacitance, Maxwell’s Bridge, Desauty Bridge, Anderson Bridge, Course Code- EC401
Schering Bridge, Wien Bridge, Applications and Limitations.

Module IV: Instrument Transformers and Transducers

Module I: Diode & Transistor Circuits:
Current Transformer and Potential Transformer - construction, theory, phasor diagram, errors,
testing and applications. Measurement of Temperature, RTD, Thermistors, LVDT, Strain Gauge, P-N junction diode, I-V characteristics of a diode, review of half-wave and full-wave rectifiers,
Piezoelectric Transducers, Digital Shaft Encoders, Tachometer, Hall effect sensors. Sensors and Zener diodes, clamping and clipping circuits. Amplifier models, Voltage amplifier, current
Transducers for physical parameters: temperature, pressure, torque, flow. Speed and Position amplifier, transconductance amplifier and trans-resistance amplifier. Biasing schemes for BJT and
Sensors. FET amplifiers, bias stability, various configurations (such as CE/CS, CB/CG, CC/CD) and their
features, small signal analysis, low frequency transistor models, estimation of voltage gain, input
Module V: Electronic Instruments:
2nd year UG Engg & Tech. Jharkhand University Of Technology 2nd year UG Engg & Tech. Jharkhand University Of Technology
resistance, output resistance etc., design procedure for particular specifications, low frequency Reference Books:
analysis of multistage amplifiers, high-frequency equivalent circuits.
Module II: Oscillators, DAC & ADC: 1. P. Horowitz and W. Hill, “The Art of Electronics”, Cambridge University Press, 1989.
2. P. R. Gray, R. G. Meyer and S. Lewis, “Analysis and Design of Analog Integrated Circuits”,
Review of the basic concept, Barkhausen criterion, RC oscillators (phase shift, Wien bridge etc.),
John Wiley & Sons, 2001
LC oscillators (Hartley, Colpitt, Clapp etc.), non-sinusoidal oscillators. Digital-to-analog
converters (DAC) Weighted resistor, R-2R ladder, resistor string etc., Analog to-digital converters 3. Op-Amps and Linear Integrated Circuits by A. Gayakwad, Pearson Publication -------------------
(ADC): Single slope, dual slope, successive approximation, flash etc. --------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------
Module III: MOSFET circuits:

MOSFET structure and I-V characteristics, MOSFET as a switch, MOSFET as an amplifier: small
signal model and biasing circuits, common-source, common-gate and common-drain amplifiers; DIGITAL ELECTRONICS AND LOGIC DESIGN
small signal equivalent circuits - gain, input and output impedances, transconductance, high
Course code -EC 302
frequency equivalent circuit.

Module IV: Differential, multi-stage and operational amplifiers:

Module I: Binary Codes and Boolean algebra
Differential amplifier; power amplifier; direct coupled multi-stage amplifier; internal structure of
an operational amplifier, ideal op-amp, non-idealities in an op-amp (Output offset voltage, input Analog and Digital, Binary Number System. Addition, Subtraction, Multiplication, Division of
bias current, input offset current, slew rate, gain bandwidth product) binary numbers, Subtraction using 2’s complement method. Binary codes: weighted and non-
Module V: Linear & Nonlinear applications of op-amp: weighted codes, self-complementary codes, BCD, Excess-3, Gray codes, Alphanumeric codes,
ASCII Codes. Boolean algebra: Boolean Laws and Expression using Logic
Idealized analysis of op-amp circuits, Inverting and non-inverting amplifier, Differential amplifier,
Gates, Realization of different gates using Universal gates, DeMorgan’s Theorem, Duality
Instrumentation amplifier, Integrator, Active filter, P, PI and PID controllers and lead/lag
Theorems.
compensator using an op-amp, Voltage regulator, Oscillators (Wein bridge and phase shift).Analog
to Digital Conversion. Hysteretic Comparator, Zero Crossing Detector, Square wave and Module II : Boolean function minimization Techniques
triangular-wave generators, Precision rectifier, peak detector, Monoshot. Standard forms: SOP, POS, Simplification of Switching function & representation (Maxterm &
Minterm), Boolean expression & representation using logic gates, Propagation delay in logic
gate. Karnaugh map: K-map(up to 5 variables), mapping and minimization of SOP and POS
Text Books:
expression, Don’t care condition, conversion from SOP to POS and POS to SOP form using
1. A. S. Sedra and K. C. Smith, “Microelectronic Circuits”, New York, Oxford University Press, Kmap, Minimization of multiple output circuits, Quine Mc-cluskey method minimization
1998. technique, prime implicant table, Don’t care condition.
2. J. V. Wait, L. P. Huelsman and G. A. Korn, “Introduction to Operational Amplifier theory and
Module III: Combinational Circuits Design
applications”, McGraw Hill U. S., 1992.
3. J. Millman and A. Grabel, “Microelectronics”, McGraw Hill Education, 1988. Adder & Subtractor (Half and Full), Parallel Binary adder, BCD Adder, Binary multipliers, Code
Converters, parity bit generator, Comparators, Decoder, BCD to 7-segment Decoder, Encoders,
Priority Encoders, Multiplexers, De Multiplexers.
2nd year UG Engg & Tech. Jharkhand University Of Technology 2nd year UG Engg & Tech. Jharkhand University Of Technology
Module IV: Sequential Circuits Elements --------------------------------------------------------------------------------------------------------------------
Introduction to sequential circuit, Flip-flop & Timing Circuits: SR latch, Gated latch, Tri state
logic, Edge triggered flip-plop: - D, JK, T Flip-flop, flip-flop asynchronous inputs ,characteristic
table of Flip-flop, excitation table of Flip-flop, master slave JK flip flop, inter conversion of DATA STRUCTURES AND ALGORITHMS
Flipflop. Study of timing parameters of flip-flop. Shift registers: buffer register, controlled buffer
register. Data transmission in shift resistor SISO, SIPO, PISO, PIPO, Bidirectional shift register, Course code -CS 301
universal shift registers. Counter: Classification, Ripple or asynchronous counter, Effect of
propagation delay in ripple counters, up-down counter,
Design of Mod-n counter, synchronous counter, Ring counter, Johnson counter. Introduction to Module I
FSM. Design of synchronous FSM, Algorithmic State Machines charts. Designing synchronous
circuits like Pulse train generator. Basic concepts and notations: Data structures and data structure operations, Complexity
Module V: Logic Families and VLSI Design flow Analysis: Mathematical notation and functions, algorithmic complexity and time space trade off,
Big O Notation, The best, average & worst cases analysis of various algorithms. Arrays: Linear
Logic Families and Semiconductor Memories: TTL NAND gate, Specifications, Noise margin, & Multidimensional Arrays, Representation & traversal. Sorting algorithms: Bubble sort, Selection
Propagation delay, fan-in, fan-out, Tristate TTL, ECL, CMOS families and their interfacing, sort, Insertion sort, Merge sort and Quick sort, Counting Sort. Linear search and Binary search on
Memory elements, Concept of Programmable logic devices like FPGA, Logic implementation sorted arrays.
using Programmable Devices VLSI Design flow: Design entry, Schematic, FSM & HDL,
different modelling styles in VHDL, Data types and objects, Dataflow, Behavioural and Module II
Structural Modelling, Synthesis and Simulation VHDL constructs and codes for combinational
Abstract Data Types (ADTs) Stack: Push; Pop, stack representation using array and linked list,
and sequential circuits
Applications of Stack, Recursion. Queue: Representation using array and linked list, Insertion and
deletion operations, circular queue, Dequeue, priority queue. Linked Lists & their types.

Text Books : (Single, Double, Circular linked lists), Operations on Varieties of Linked Lists (Search and
Update) with applications
1. Kharate “Digital Electronics” OXFORD Publication
2. A. Anand Kumar ‘Fundamentals of Digital Circuits’. PHI Publications Module III
3. R.P. Jain-‘Modern Digital Electronics’ IIIrd Edition- Tata Mc Graw Hill, Publication
Introduction to Trees, Binary tree - definitions and properties; binary tree traversal algorithms with
4. Douglas Perry, “VHDL”, Tata McGraw Hill, 4th edition, 2002.
and without recursion., Binary Search Tree - creation, insertion and deletion operations, Threaded
5. Charles Roth, “Digital System Design using VHDL”, Tata McGraw Hill 2nd edition tree (One way and Two way). AVL tree balancing; B-tree
6. Bhaskar VHDL BASED DESIGN ,PEARSON EDUCATION
Module IV
Reference Books:
Graph Algorithms: Graphs and their Representations, Graph Traversal Techniques: Breadth First
1. Rajkamal ‘Digital Systems Principals and Design’ Pearson Education Search (BFS) and Depth First Search (DFS), Applications of BFS and DFS, Minimum Spanning
2. A.P. Malvino, D.P. Leach ‘Digital Principles & Applications’ -VIth Edition-TMH Trees (MST), Prim’s and Kruskal’s algorithms for MST, Connected Components, Dijkstra’s
publication.
Algorithm for Single Source Shortest Paths,, Floydd’s Algorithm for All-Pairs Shortest Paths
3. M. Morris Mano ‘Digital Design’ (Third Edition). PHI Publications Problem
---------------------------------------------------------------------------------------------------------------------
2nd year UG Engg & Tech. Jharkhand University Of Technology 2nd year UG Engg & Tech. Jharkhand University Of Technology
Module V ENGINEERING ECONOMICS
Hashing techniques, Hash function, Address calculation techniques- common hashing functions Course code –EN 401
Collision resolution, Linear probing, quadratic probing, double hashing, Bucket addressing.
COURSE OUTLINE:
Rehashing
The basic purpose of this course is to provide a sound understanding of concepts and principles of
engineering economy and to develop proficiency with methods for making rational decisions
Course Outcomes: At the end of the course the student will be able to: regarding problems likely to be encountered in professional practice.

Understand the concept of ADT Module -1

Identify data structures suitable to solve problems
Introduction of Engineering Economics and Demand Analysis: Meaning and nature of
Develop and analyse algorithms for stacks, queues
Economics, Relation between science, engineering, technology and economics; Nature of
Develop algorithms for binary trees and graphs Economic problem, Production possibility curve, Concepts and measurement of utility, Law of
Implement sorting and searching algorithms Diminishing Marginal Utility, Law of equi-marginal utility – its practical application and
Implement symbol table using hashing techniques importance.

Text Books: Meaning of Demand, Individual and Market demand schedule, Law of demand, shape of demand
1. Data Structures Using C – A.M. Tenenbaum (PHI) curve, Elasticity of demand, measurement of elasticity of demand, practical importance &
2. Introduction to Data Structures with Applications by J. Tremblay and P. G. Sorenson (TMH) applications of the concept of elasticity of demand.
3.Data Structures, Algorithms and Application in C, 2 nd Edition, Sartaj Sahni Module -II
4. Data Structures and Algorithms in C, M.T. Goodrich, R. Tamassia and D. Mount, Wiley
India. Meaning of production and factors of production; Law of variable proportions, Returns to scale,
REFERENCE BOOKS: Internal and External economics and diseconomies of scale.
1. Data Structure and Program Design in C by C.L. Tondo.
2. Data Structures with C++, J. Hubbard, Schaum’s Outlines, TMH. Various concepts of cost – Fixed cost, variable cost, average cost, marginal cost, money cost, real
3. Data Structures and Algorithms in C, M.T. Goodrich, R. Tamassia and D. Mount, Wiley cost, opportunity cost. Shape of average cost, marginal cost, total cost, Cost curves.
India.
Module III
4. Data Structures and Algorithm Analysis in C, 3 rd Edition, M.A. Weiss, Pearson.
5. Classic Data Structures, D. Samanta, 2nd Edition, PHI. Meaning of Market, Types of Market – Perfect Competition, Monopoly,
6. Data Structure Using C by Pankaj Kumar Pandey. Oligopoly, Monopolistic Competition (Main features of these markets)
7. Data Structure with C, Tata McGraw Hill Education Private Limited by Seymour
Pricing Policies- Entry Deterring policies, Predatory Pricing, Peak load Pricing. Product Life cycle
Lipschutz.
8. Data Structure through C in Depth, BPB Publication, by S.K. Srivastava. Firm as an organisation- Objective of the Firm, Type of the Firm, Vertical and Horizontal
9. Data Structure and algorithm Analysis in C 2nd Edition, PEARSON Publishing House, Mark Integration, Diversification, Mergers and Takeovers.
Allen Weiss
--------------------------------------------------------------------------------------------------------------------- Module -IV
------------------------------------------------------------------------------------------------------------------
Nature and characteristics of Indian economy (brief and elementary introduction), Privatization –
meaning, merits and demerits. Globalisation of Indian economy – merits and demerits. Elementary
Concepts of VAT, WTO, GATT & TRIPS agreement, Business cycle, Inflation