Micro inverter Use Manual ( Life )

Green Energy
Expert
Micro Inverter Smart Inverter

IoT Monitoring Platform

Smart mobile "core" life
● CO-2 induced environmental analysis

● Daily and total energy generation in kWh

● Actual DC input voltage, current and power

● Actual AC output voltage, current and power

● Inverter temperature

● Historical (daily, weekly, monthly) power curve

● Power losses due to weather induced effects

● Optional limitation of power output

● Online switch for the inverter start stop

Communication mode

Router Ali Could Ser ver

Wi-Fi Wi-Fi Wi-Fi Wi-Fi Wi-Fi

APP
WVC-800(Life) CO-2 induced environmental analysis Inverter temperature

Daily and total energy generation in kWh Optional limitation of power output

Actual DC input voltage, current and power Online switch for the inverter start stop

Actual AC output voltage, current and power Historical (daily, weekly, monthly) power curve

Micro inverter Use Manual ( Life )

Micro inverter Use Manual ( Life )

model WVC-800 Detailed
Recommend use panels 2*475Watt
Output voltage mode 120/230V Auto switch Micro Inverter

PV Open circuit voltage 33 - 60VDC

Operating voltage range 22-60V
Starting voltage range 22-60V
antenna Screw Kit AC Plug
short-circuit current 2*18A
Maximum working current 2*16A Exterior Accessories

Output parameters @120V @230V System diagram

Output peak power 800Watt 800Watt
Rated output power 780Watt 780Watt Wi-Fi Data exchange App Control

Output current 6.7A 3.5A

Wi-Fi Router Ali Could Server Monitor System
AC voltage range 85-160VAC 180-265VAC
AC frequency range 48-51Hz/58-61Hz 48-51Hz/58-61Hz
Power factor >95% >95% L/L1 95684.18Kw
N/L2
Number of branch connections. 6PCS（Single） 12PCS（Single） Micro Inverter Array

Output efficiency @120V @230V Ground Switch Meter Power Grid

Static MPPT efficiency 99.5% 99.5%

Max output efficiency 95% 95% With N wire connection (Single phase 120/230V) No N wire connection(Single phase 120V)

Loss of power at night <0.5W <0.5W 3-N-Neutral 1-L-Live wire 3-L2-Live wire 1-L1-Live wire
3 1 3 1

Total current harmonics <5% <5% 2 2

Appearance and technical features 2-G-Ground 2-G-Ground

Temperature range -20°C to +50°C 4mm2 4mm2
G -Yellow & Green G -Yellow & Green
Size（L×W×H） 283mm×200mm×41.6mm 4mm2 4mm2

N -Blue N -Blue
Net amount 1.56kg 4mm2 4mm2

L -Red L -Red
Waterproof grade Ip65 NEMA3R
Heat dissipation mode Self-cooling Note: You can purchase a professionally customized AC bus with a T-type connector.
Use this AC bus as the AC bus for each branch. Connect it hand in hand to form
Communication mode Wi-Fi
a modular micro-inverter branch wiring system.
Power transmission mode Reverse transmission,Load priority
monitoring system APP When the inverter is not started/shutdown and has been connected to the grid,
the status of the LED indicators is as follows
Electromagnetic Detection EN61000-6-1:2007 EN6100-6-3:2007+A1:2011+AC:2012
EN50549-1、EN 50549-2、NBR 16149:2013、UL1741
1) When the inverter is not working ----------------- Red light is always on
Power Grid standard
2) When the inverter is in working state ------------ Blue light flashes
Power grid detection IEC/EN 62109-1、 IEC/EN 62109-2、 IEC 62116、IEEE 1547 (MPPT is locked to a long light state)
Certificate CE，CEC, ETL , INMETRO
When the inverter is not started/shutdown and is not connected to the grid, the
Packing weight LED indicator status is as follows
Specifications Each（Packing） Box（5PCS） 1) When the inverter is not working ----------------- Red light flashes
2) When the inverter is in working state ------------ Blue light flashes
weight 2.8ＫG 14ＫG
(MPPT is locked in a long light state), and the red light flashes once every three seconds
Size 342×240×115mm 440×380×260mm

Micro inverter Use Manual ( Life )

Micro inverter Use Manual ( Life )

Features

Smart APP can realize real-time data transmission with the cooperation of
Alibaba Cloud IoTThrough graphs and graphic displays in time, users can
中国移动 10:20 68%
DOWNLOAD understand the operation of the power station. The user can monitor the
operation and adjust the output power function of the system.
云智能
Cloud Intelligence APP
Please use the QR code to scan and install the "Cloud Intelligence" 中国移动 10:20 68%
中国移动 10:20 68%
client application,System version: Android 5.0, IOS 9 and above WVC-MODEM-Collector … Inverter settings … Attributes
Setup > Setup
LocalTimer Energy Clear
Energy Clear
PV Voltage 36.5V w
PV Current 9.31A
345·4
PV Power
PV Input Power Adjustment

Output Voltage 231.6V

Output Current 2.36A 251·7 w AC Output 5% 25% 50% 75% 100% Power Output
Output Power

℃
146.08kW·h
Energy 39·8
Temperature
Temperature Power Switch
Remote switch

Power Curve
℃
39·8
1635.2 w 1635.2 w Temperature Data query
12:00

Note:The(energy Clear)function can clear the

power of the device and cannot be restored.
Please operate with caution!!!

Note

Please strictly observe the following installation conditions

Cloud Intelligence APP
a) Connect the communication antenna on the inverter; INTELLIGENT Iot MONITORING MODEM
b) Install the inverter in a place where the Wifi signal is well Number of data collectors per Modem
Built-in WiFi IoT data terminal
covered; Can be used on any smart device (Android/iOS)
c) The connected Wi-Fi network needs to be in 2.4G ● CO-2 induced environmental analysis
● Daily and total energy generation in kWh
communication mode; ● Actual DC input voltage, current and power
● Actual AC output voltage, current and power
d) If the WiFi signal cannot effectively cover the inverter, an
● Inverter temperature
additional WiFi signal booster can be installed; ● Historical (daily, weekly, monthly) power curve
● Power losses due to weather induced effects
e) Turn on the Bluetooth of the mobile phone; ● Optional limitation of power output
● Online switch for the inverter start stop

Micro inverter Use Manual ( Life )

Micro inverter Use Manual ( Life )

Bluetooth Mode Wi-Fi Mode

Setp 1 Setp 2 Setp 1 Setp 2

Turn on the Bluetooth of When the inverter appears on Bluetooth distribution network Scan the QR code on the
the mobile phone, click the the automatic discovery fails, you can click to scan the inverter to activate network
"+" icon to add the device; page, click the "+" sign QR code to operate operation

中国移动 10:20 68% 中国移动 10:20 68% 中国移动 10:20 68% Click to add
< Auto Discover < Auto Discover
My Home
+
>

Sunny 22℃ Outdoor Air Quality Moderate

Micro Inverter
Click to add
28:9C:6E:14:EB:88
+
Device Room Group

Click to add
+
WVC-300
Model:Life
SN:20210225
PK:20000513 Scan QR card
No device.Please add one.

Add Manually Add Manually

Setp 3 Setp 4 Setp 3 Setp 4

Select WiFi signal, enter the The system will enter the Select WiFi signal, enter the The system will enter the
Wi-Fi password; click Next network configuration state Wi-Fi password; click Next network configuration state

中国移动 10:20 68% 中国移动 10:20 68%

中国移动 10:20 68% 中国移动 10:20 68%
< < Device Networking
< < Device Networking
Establish Wi-Fi Connection Establish Wi-Fi Connection
Only 2.4G Wi-Fi network is supported Adding Devices Only 2.4G Wi-Fi network is supported Adding Devices
Bluetooth is connecting,please make sure: Bluetooth is connecting,please make sure:
The device is powered on; The device is connecting; Put The device is powered on; The device is connecting; Put
You Wi-Fi SSID
Enter Wifi Password mobile phone close to the device; You Wi-Fi SSID
Enter Wifi Password mobile phone close to the device;

You Wi-Fi Password You Wi-Fi Password

Save Password Save Password

Remember Me
Network progress Remember Me
Network progress
3 % 3 %
Next Step
Next
Next
Next Step
Device is found
Connect Device
Progress project Device is found
Connect Device
Progress project
Connect to the router Connect to the router

Connect to Cloud Connect to Cloud

Complete
Network completed Complete
Network completed

Micro inverter Use Manual ( Life )