Rawlplug Leaflets R-LX EN 03 2018 PRINT Compressed

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Highlights 2018

R-LX

PRODUCT INFORMATION SUBSTRATE MATERIAL


Cracked concrete,
Anchor non-cracked concrete, reinforced concrete
Coating Drill
Rawlplug code Lenght
ZP ZF 5.0 6.0 8.0 10 14 35-160

R-LX-HF        
R-LX
R-LX-CS         „ DOUBLE THREAD, DOUBLE POWER.
R-LX-I         ETA OPTION 1 APPROVED
New line of R-LX screw-in
R-LX-E         anchors from Rawlplug

R-LX-P        

R-LX-H        
The thread on the R-LX screws bite into the concrete enabling secure transfer of high loads.
This allows you to use it without constraints where you were once forced to replace a mechanical
anchor with a bonded one.

INSTALLATION GUIDE
You can adjust the screw positioning after fixing.
As confirmed by the European Technical Assessment (ETA) conforming with
EAD 330232-00-0601 and 330011-00-0601, the screw position can be adjusted twice
TOOLS FOR DESIGNERS within a range of up to 1 cm without compromising its load capacity.

Our original application dedicated to engi-


neers and designers. This simple, yet multi-

HIGHLIGHTS
functional tool enables you to run calcula-
tions and develop designs using Rawlplug
fixings. EasyFix is a guarantee of reliability
and safety, since both the program itself 1. Drill a hole to the required diameter and depth.
and the calculations it delivers conform to 2. Clean the hole of drilling dust using a brush and a blowpump.
the standards defined in European Technical 3. Insert a screw into the hole through the fixture and use a torque wrench to tighten
Approval Guidelines (ETAG). it to the required tightening torque.
4. If necessary ease the screw to place a washer, and then tighten it for optimum fixing effect.
Available to DOWNLOAD at
Rawlplug Ltd Tel: +44 (0) 141 6387 961
easyfix.rawlplug.com Skibo Drive Fax: +44 (0) 141 6387 397 www.rawlplug.co.uk

RM-L-R-LX-EN
Thornliebank Industrial Estate [email protected]
Glasgow G46 8JR www.rawlplug.co.uk
Highlights 2018

„DOUBLE THREAD, DOUBLE POWER.


R-LX

Quick, efficient STRENGTH OF A SINGLE SCREW


The ring-like structure and the special high-low type thread is a perfect

ETA OPTION 1 APPROVED and secure anchoring combination of features that enables the thread to bite into the material
and develop a reliable and lasting joint. The functioning of our concrete
screws is not based on the expansion principle, but they undercut
the substrate in order to be able to transfer increased loads.
There is more to that, since the design of the screws enables them
Wide range to efficiently and evenly distribute the forces affecting them over
of applications the entire thread. In practice, this means that force distribution
in the substrate is analogical to that of elements embedded in concrete.
And the effect? Rawlplug’s R-LX anchors attain the highest available load
The product is fully supported capacity compared to other anchors in the class. STRONG JOINT.
APPROVALS: CERTIFICATES: DECLARATIONS: COATINGS: CONDITIONS: FILE:
by Easy Fix design software
CORROSION PROBLEM – SOLVED
Our solution is so powerful owing to the innovative forging and heat
PROVALS: CERTIFICATES: DECLARATIONS: COATINGS: CONDITIONS:
Scan the QR code FILE: treatment process. Not only does it ensure high steel class in the final
APPROVALS: CERTIFICATES: DECLARATIONS: COATINGS: CONDITIONS:
for more information FILE:
6 screw head product, it also enables multiple use in installation. The process has
variants for allowed us to eliminate the risk of what is referred to as hydrogen
APPROVALS: CERTIFICATES: DECLARATIONS: COATINGS: CONDITIONS: FILE: easy adaptation embrittlement which haunts contractors when they decide to use
to fixing into substrate products made of high hardness carbon steel. Moreover, the R-LX
screws have been designed in two variants, and come with high-
quality zinc electroplated finish or zinc-flake finish of even higher
Removal and corrosion resistance. The anticorrosive characteristics of the brand’s
multi-functional products have been confirmed in a salt spray chamber test with the
use result being 1,500 hours! It has ascertained us that the R-LX screws
are suitable for certain applications in environments as corrosive
as class C4. 100% CERTAINTY OF CORROSION PROTECTION.

SELF-TAPPING ASTONISHING INSTALLATION


CONCRETE SCREW SIMPLICITY
Main thread’s Just drill a hole to a diameter slightly smaller than the screw itself
The R-LX is an innovative mechanical anchor. The impressive speed and simplicity of installation
distinctive outline by following the clear drill size guidelines provided in the screw
as well as small edge distance requirements make it unrivalled in many applications. It is exactly
to maximise product code. A hole therefore prepared ensures appropriate screw
what you need to install a large number of fixings in a short time.
the undercut guiding while its main thread will create precise undercutting of the
substrate material as you screw it in. Since this is a one-piece fixing
Unique solution, you don’t need to use any washers or nuts. Additionally,
Hexagonal head screw Externally threaded and patented the screws require no special tools for installation,
with washer head screw thread profile and even more importantly – they can be completely removed
R-LX-HF R-LX-E when needed without making any damage. IT’S SIMPLE.
Design facilitating
transfer of tightening EVERY CONTRACTOR’S
Button head screw
Countersunk head screw
R-LX-P
torque to thread
NEEDS SATISFIED
R-LX-CS There is another reason why this product is truly worth your while.
The R-LX line is very extensive, encompassing even highly specific
requirements and satisfying the needs of professionals from all
construction segments. Rawlplug’s screws come with as many as 6
Internally threaded Hexagonal head screw Perfect tip profile Double thread that ensures different head variations: hexagonal version with integrated washer,
head screw for temporary installation making application easy optimum load capacity countersunk version for flush installation, internally threaded socket
version, threaded rod version, cylinder head version and hexagonal
R-LX-I R-LX-H* version without integrated washer for temporary fixing. Additionally,
each variant covers diameters from 5 to 14 mm and lengths
of up to 200 mm. AS YOU NEED IT.
www.rawlplug.co.uk *Not included in ETA assessment.

You might also like