Instructions V 1.

Tutorial Videos
Catalogue

1. Overview……………………………………………………………………………………… 1

2. Getting started… …………………………………………………………………………… 2

2.1 Charging……………………………………………………………………………………………………… 2

2.2 Adjust the gimbal to gimbal balancing position… …………………………………………………… 2

2.3 Using the tripod… ………………………………………………………………………………………… 3

3. Mounting the Smartphone… …………………………………………………………… 3

4. Gimbal Balancing…………………………………………………………………………… 4

5. Power ON/ OFF… …………………………………………………………………………… 5

6. Function/Modes introduction… ………………………………………………………… 5

6.1 Follow modes introduction… …………………………………………………………………………… 5

6.2 Other function introduction… …………………………………………………………………………… 6

7. App Connecting……………………………………………………………………………… 7
7.1 Connect with Feiyu ON App… …………………………………………………………………………… 7

7.2 Function introduction of App… ………………………………………………………………………… 7

8. Operation… ………………………………………………………………………………… 9
8.1 Button operation… ………………………………………………………………………………………… 9

8.2 Indicator…………………………………………………………………………………………………… 13

9. Specifications… ………………………………………………………………………… 14
Tutorial

·The tutorial videos can be watched at FeiyuTech official

website or scan the QR code.
https://www.feiyu-tech.com/play/

Download the App

Scan the QR code to download the App, or
search for "Feiyu ON"in the App Store or Google
Play.
* Requires iOS 9.0 or above, Android 6.0 or above.
iOS Android
1. Overview
* Not include smartphone.

[19]

[20]
[16]
[15]

[3] [21]
[17]
[14]
[22]
[4]
[23]
[10] [5]
[18] [6] [1]
[7]
[8] [2]
[9]
[11]
[12]

[13]

[1] Power button [12] FPV button

[2] Trigger button [13] Handle
[3] F2 button [14] Multifunction knob
[4] Shutter button [15] Smartphone holder
[5] Joystick [16] Cross arm
[6] Mode button [17] Roll axis
[7] R button [18] Roll lock
[8] Auto rotation button [19] Tilt axis
[9] L button [20] Tilt lock
[10] F1 button [21] Cross arm
[11] Knob function switching [22] Pan axis
button [23] Pan lock

-1-
2. Getting started
2.1 Charging
Please fully charge the battery before power on the gimbal for the first time.
Charging with USB-C cable, supports quick charge.

2.2 Adjust the gimbal to gimbal balancing position

The gimbal is folded by default, please unlock all the three axes and adjust the
gimbal to gimbal balancing position, and then lock the three axes.

Gimbal folded position Gimbal balancing position

-2-
2.3 Using the tripod
Install the tripod if needed, mount the tripod to the bottom of the gimbal, then
unfold the tripod and place the gimbal on a flat surface.

Unfold the tripod

3. Mounting the Smartphone

Make sure you have completed all the steps which mentioned in “chapter 2.
Getting started” and the gimbal is adjusted to gimbal balancing position. It is
recommended to remove the smartphone case before mounting the smartphone.

Horizontal mounting Vertical mounting

Steps:
Take horizontal mounting as an example:
(1) Power off the gimbal or enter sleep mode first, then rotate the smartphone holder
-3-
to make it vertical to prepare for landscape shooting.
(2) Extend the smartphone holder, and put your smartphone in, keep the
smartphone holder in center.
Note: before switching the mounting direction, the gimbal required to be off or in
sleep mode.

4. Gimbal Balancing
Please balance the gimbal before powering it on. Before balance
the gimbal, please power off it or enter sleep mode.
Tutorial Videos

(1) Unlock the three axis locks ① , observe the tilt direction of the mobile phone.
(2) If the phone is tilted to one end, it means that the center of gravity is toward this
end, and the fixing knob needs to be loosened ② , and then move the cross arm in
the opposite direction ③ , until the cross arm maintains a horizontal balance.
(3) tighten the fixing knob ② .

3
2
1

-4-
5. Power ON/ OFF
Before power on the gimbal, make sure you have balanced gimbal, and unlocked all
the three axes. If you haven't unlocked all the 3 axes, gimbal will enter sleep mode
to protect itself. Please single tap power button to wake up gimbal after unlocked all
the 3 axes.
Long press the power button and release it when you hear the beep sound to power
on/ off.

Quickly power off: Single tap the knob function switching button and power button
at the same time

6. Function/Modes introduction
6.1 Follow modes introduction

① PF
Pan follow, only the pan axis follows the movement of user's hand.
② PTF (Default mode)
Pan and tilt follow, where both the pan and tilt axes follow the movement of user's
hand, but roll axis does not.
③ FPV
Pan, tilt and roll follow, where all 3 axes follow the movement of user's hand.
④ Lock
All 3 axes do not follow the movement of user's hand, gimbal keeps the direction of
the camera fixed.

-5-
⑤ FFW
Flash follow, where all 3 axes follow the movement of user's hand in high follow
speed.

① PF ② PTF ③ FPV

Follow

④ Lock ⑤ FFW Not follow

6.2 Other function introduction

Auto rotation
Camera will auto rotate to shoot according to the rotation speed and direction that
set by users. It can be used to achieve the image rotating scene which been used
frequently in movie Inception.

Manual lock
Manually move camera to desired position, and hold for half a second. New tilt
/pan positions are automatically saved.

-6-
7. App Connecting
7.1 Connect with Feiyu ON App
(1) Turn on the smartphone Bluetooth, run Feiyu ON App, and App wil search gimbal
automatically, follow the prompts to connect gimbal.
(2) After the connection succeed, it's easy to control gimbal via App including control
the pan and tilt axis angle with the virtual joystick, switch modes, set motor power/
camera parameters/ follow speed, set other functions, parameters, and update
firmware.

7.2 Function introduction of App

Shooting Interface Control Interface

[3]

[1] [4] XXXXXX

FY_XXXXXXXX_xx
[2]

[10]

[11]

[12]

[5] [6] [7] [8] [9] [13] [14] [15] [16]

[1] Gimbal control access

Display the product name and device battery of current connecting gimbal, tap to
enter gimbal operation interface, which allows user to use virtual joystick to control

-7-
gimbal, switch follow modes, recenter gimbal, adjust horizontal angle manually.
When not connected to gimbal, prompt user to connect with gimbal.

[1] Back
Tap to return to home page.

[2] Album
Tap to enter album.

[3] Gimbal control

Tap to enter gimbal remote control interface, which allows user to use virtual joystick
to control gimbal and switch follow modes.

[4] Gimbal information

Tap to check current connecting gimbal and it’s battery, user can also update
firmwares for gimbal.

[5] Switch between photo/video mode

Tap to switch between switch between photo/video mode.

[6] Switch usage scenarios

In photo mode: Free panorama /Ultra-wide angle / 180° panorama / 360° panorama /
Normal photo / Overlapping image / Light rail mode / Quick panorama.
In video mode: Static timelapse / Track timelapse / Dolly zoom / Normal video / Light
rail video / Kuaishou Live.

[7] Shutter
Tap to take photo in photo mode.
Tap to start/stop recording in video mode.

[8] Switch between front and back cameras

Tap to switch between front and back cameras.

[9] More
Support photo timer, beauty, flash, auxiliary line, peak assist, overexposure tips,

-8-
filter, AI and gesture settings.

[10] Horizontal angle

Slide the slider to control roll axis to adjust the horizontal angle.

[11] Recenter
Tap to recenter the gimbal.

[12] Virtual joystick

Use virtual joystick to control pan and tilt axis.

[13] Lock Mode

Tap to enter lock mode.

[14] Pan follow (PF)

Tap to enter pan follow (PF) mode.

[15] Pan and tilt follow (PTF)

Tap to enter pan and tilt follow (PTF) mode.

[16] FPV
Tap to enter FPV (All follow) mode.

8. Operation

8.1 Button operation

8.1.1 Power button

Long press: Power on/off
Single tap: Wake up
Double tap: Enter sleep mode

-9-
8.1.2 Mode button
Single tap: Switch among Lock/PF/PTF(Default)/
FPV/ FFW mode (Switch in turn)
Tap five times: Horizon calibration(Single tap to
wake up after calibration completed)

8.1.3 Trigger button

Single tap: Face tracking (Feiyu ON App)
Double tap: Recenter
Triple tap: Enter/Exit selfie mode (Pan axis turn
180° )
Press and hold: Enter Lock mode (Release to exit)
You can custom the function via App

8.1.4 Joystick
Push: Control the movement of the tilt and pan
axes.

Control the album in Feiyu ON App:

Move to left: choose previous photo/ video
Move to right: choose next photo/video
Move upward: volume up
Move downward: volume down

8.1.5 Shutter button*

Press half way: Focus (Feiyu ON App)
Single tap (Fully): Start/stop recording/ Take
photo
Long press (Fully): Switch among video/ photo
mode (Feiyu ON App)
*Need to connect with smartphone

- 10 -
8.1.6 Auto rotation button
Single tap: Enter auto rotation mode
Single tap again:
(1) Exit auto rotation mode (When gimbal is not
rotating)
(2) Pause the rotation (When gimbal is rotating)

8.1.7 L button
Single tap: Turn left continuously
Single tap again: Switch rotating speed (Switch
cyclically among Slow/Med/Fast orderly, the preset speed
is Med)

Active in auto rotation mode

8.1.8 R button
Single tap: Turn right continuously
Single tap again: Switch rotating speed (Switch
cyclically among Slow/Med/Fast orderly, the preset speed
is Med)

Active in auto rotation mode

8.1.9 F1 button
Double tap: Enter/Exit album (Feiyu ON App)

8.1.10 F2 button
Double tap: Enter FFW mode

- 11 -
8.1.11 FPV button
Single tap: Enter/Exit FPV mode

8.1.12 Knob function switching button

Single tap:
(1) Switch the control object while controlling
the movement of the 3 axes (Tilt/Pan/Roll)
(2) When in electronic focus/zoom control state,
single tap to switch between electronic focus
and electronic zoom (Feiyu ON App)
Long press: Switch the control options of
Multifunction knob in turn (The movement of
the 3 axes, electronic focus/zoom)

8.1.13 Multifunction knob

Turn:
(1) Control the movement of the roll, tilt and pan
axes.
(2) Control electronic focus/zoom (Feiyu ON App)
Set current control option as option (1) or (2) through
knob function switching button

- 12 -
8.2 Indicator

[1] Battery indicator A/ [1]

ABC Bluetooth indicator instruction
B/C [2]
Bluetooth status Indicator
[2] Camera/Bluetooth
indicator Bluetooth connected
Bluetooth disconnected
[3] Follow status
indicator Unpairing Bluetooth*
[3]
TILT = Tilt axis *Clear Bluetooth connection: push the
ROLL= Roll aixs joystick down and hold it, then triple tap
PAN = Pan axis the power button
The indicator is on which means the corresponding
axis follows the movement of user's hand.

Follow status indicator instruction Battery indicator instruction

Follow status indicator Battery indicator

Mode Battery level
TILT ROLL PAN A B C
Lock Fully charged
PF High level of
battery
PTF
Medium level of
FPV battery
FFW Low power
Auto rotation Low power, will
auto power off

Other status indicator instruction Icon:

Battery indicator Light of corresponding color

Status
/ / /
A B C is on
Sleep mode Blue light keeps flashing twice
Initializing Blue light flashes quickly
Initialization Yellow light flashes quickly
failed Red light flashes quickly
The green light flashes Green light flashes quickly
Upgrading
cyclically
Green light breathing
The yellow light flashes
Upgrade failed Light is off
cyclically

- 13 -
9. Specifications
Product name Feiyu SCORP-Mini P 3-Axis Handheld Gimbal for Smartphone
Product model FeiyuMP01
Max. Tilt Range +143° ~-147°（±3°）
Max. Roll Range +90.4° ~-199.7°（±3°）
Max. Pan Range 360°
Weight About 683g (not including tripod)
Payload capability About 520g (Well-balanced)
Battery life About 11 Hours (Well-balanced)
Charging time About 1.5 Hours (18W quick charge)
Battery 2200mAh
Operating voltage 6.8V-8.4V
Compatible smartphones iPhone and Android phones (the width of the phone 55~ 88mm )

Packing List
SCORP-Mini P ×1, Tripod ×1, USB-C cable ×1, Manual ×1

Notice

1. Make sure motor spinning is not blocked by external force when the product is power on.
2. The product DO NOT contact water or other liquid if the product is not mark waterproof or splash-
proof. Waterproof and splash-proof product DO NOT contact sea water or other corrosive liquid.
3. DO NOT disassembly the product except marked detachable. It need send to FeiyuTech after-sales or
authorized service center to fix it if you accidently disassembly and cause abnormal work. The relevant
costs are borne by user.
4. Prolonged continuous operation may cause the product surface temperature to rise, please operate
carefully.
5. DO NOT drop or strike the product. If the product is abnormal, contact Feiyu After-sales support.

Storage and Maintenance

1. Keep the product out of the reach of children and pets.

2. DO NOT leave the product near heat sources such as a furnace or heater. DO NOT leave the product
inside of a vehicle on hot days.
3. Please storage the product in dry environment.
4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to the battery core. If
does not use the product for a long time, please charge it at least once within one month.
5. Never use the product when the temperature is too high or too low.

- 14 -
FCC regulatory conformance:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

NOTE
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Website Facebook Youtube Twitter lnstagram

- 15 -
This document is subject to change without notice. If you have
any questions about this document, please contact us by the
following ways.

Manufactured by: Guilin Feiyu Technology Incorporated Company

Website: www.feiyu-tech.com
E-mail: [email protected]
Tel: +86 773-2320865