Features

■ Single Turn / Cermet / Industrial / Sealed ■ RoHS compliant* version available

■ Available on tape and reel ■ For trimmer applications/processing
■ Available with a knob for finger adjust guidelines, click here
■ Available with extended shaft
■ Available with cross-slot rotor
■ Top and side adjust types (F, P, H, W, X
most popular)

3386 – 3/8 ˝ Square Trimpot® Trimming Potentiometer

Additional Information Product Dimensions

Click these links for more information: Common Dimensions Common Dimensions
Side Adjust Models B,C,J,X Side Adjust Models H,S,W
ADJ. SLOT ADJ. SLOT
.76 .76
WIDE WIDE
(.030) (.030)
9.53
X .76 DEEP X .76 DEEP 9.53
PRODUCT TECHNICAL INVENTORY SAMPLES CONTACT (.030) (.375) (.030) (.375)
SELECTOR LIBRARY X 3.15 X 3.15
LONG LONG
(.124) (.124)
.38 9.53 .38 9.53
MIN. (.375) MIN. (.375)
Electrical Characteristics (.015) (.015)

Standard Resistance Range 5.33 5.64

....................... 10 ohms to 2 megohms (.210) (.222)
5.97 ± .89 .51 ± .05 DIA. PINS 5.97 ± .89 .51 ± .05 DIA. PINS
(see standard resistance table) (.235 ± .035) (.020 ± .002) (.235 ± .035) (.020 ± .002)
Resistance Tolerance .............±10 % std. 2.54
3386B 4.83 3386H
(tighter tolerance available) (.190) (.100) 2

Absolute Minimum Resistance 3 2 1 1 3

........................................ 2 ohms max. 3.56 ± .25 1.40 ± .25 2.54

Contact Resistance Variation (.140 ± .010) 3.81 (.055 ± .010) (.100)
(.150) 2.54
.............................2 % or 3 ohms max. 3.81 (.100)
(whichever is greater) (.150)
1 2 3
3386S
Adjustability 3386C
Voltage Divider ........................±0.05 % 3 2 1

2.44 3.81
Rheostat ..................................±0.15 % 3.56 ± .25
(.096) (.150)
(.140 ± .010) 2.54
Resolution..................................... Infinite 2.54 (.100) 3.81
Insulation Resistance ................ 500 vdc. (.100) (.150)
1,000 megohms min. 3 2 1 3386W 1 2 3

Dielectric Strength 3386J

Sea Level ................................ 900 vac 2.44 2.54
2.44 3.81
70,000 Feet ............................. 350 vac (.096) (.150)
(.096) (.100)
Adjustment Angle................... 280 ° nom. 3.81 2.54
(.150) (.100)
Environmental Characteristics 3386X 2.54
(.100) 2
Physical Characteristics
Power Rating (300 volts max.)
3 1
85 °C ....................................... 0.5 watt Mechanical Angle .................. 310 ° nom.
1.40 ± .25 2.54 Torque.............................. 5.0 oz-in. max.
125 °C ........................................ 0 watt (.100)
(.055 ± .010) 2.54 Stop Strength................. 15.0 oz -in. min.
Temperature Range .... -55 °C to +125 °C
(.100)
Temperature Coefficient .....±100 ppm/°C Terminals ........................ Solderable pins
Seal Test .......................85 °C Fluorinert† Weight ........................................ 0.03 oz.
Standard Resistance Table
Humidity......... MIL-STD-202 Method 103 Marking ............................Manufacturer’s
96 hours Resistance Resistance trademark, resistance code,
(2 % ΔTR, 10 Megohms min.) (Ohms) Code wiring diagram, date code,
Vibration ....... 30 G (1 % ΔTR; 1 % ΔVR) 10 100 manufacturer’s model
20 200 number and style
Shock.......... 100 G (1 % ΔTR; 1 % ΔVR) 50 500
Load Life .. 1,000 hours 0.5 watt @ 70 °C 100 101 Flammability ...........................U.L. 94V-0
200 201 Standard Packaging ...... 50 pcs. per tube
(3 % ΔTR; 3 % or 3 ohms, 500 501
Wiper ................ 50 % (Actual TR) ±10 %
1,000 102
whichever is greater, CRV) 2,000 202 Adjustment Tool ............................... H-90
Rotational Life.........................200 cycles 5,000 502
10,000 103
(4 % ΔTR; 3 % or 3 ohms, 20,000 203
whichever is greater, CRV) 25,000 253
50,000 503
100,000 104
200,000 204
250,000 254
500,000 504
1,000,000 105
WARNING Cancer and 2,000,000 205
Reproductive Harm Popular distribution resistance values listed in
www.P65Warnings.ca.gov boldface. Special resistances available.

Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 3386 – 3/8 ˝ Square Trimpot® Trimming Potentiometer

Product Dimensions
Common Dimensions 3386H-EY5
Top Adjust Models F,G,K,P,R,U,V,Y 3386U 2.54 3386X-EY5 – SHOWN
(.100) 2.54
ADJ. SLOT ADJ. SLOT
(.100)
.76 .81
WIDE WIDE
(.030) (.032)
9.53 5.97 ± .89
X .76 DEEP (.375) (.235 ± .035) X 2.54 DEEP
(.030) 3 2 1 4.78 ± .38 (.100)
X 3.15 LONG 4.83 (.188 ± .015) X 3.56 LONG
(.124) (.190) (.140)

9.53 3386V 2.54

(.375) .51 ± .05 (.100) 1 2 3
(.020 ± .002) 3.56
5.64 .38 2.54 (.140)
MIN. 2.54
(.222) (.015) 1.40 (.100)
(.055) (.100) 2

2.54 3 1
5.64 (.100) 7.87
3386F (.222) 1.40
2.54 3.56 ± .25 2.54 (.310)
2.54 (.100) (.140 ± .010) (.055) (.100)
2.54
(.100)
(.100)

3 1 3386Y
2.54 3386P-EY5
2 3.56
5.08 (.100) 2.54 (.140)
(.200) 2.34 ± .38 (.100)
(.092 ± .015)
2
3386G 7.87
3 1 5.08 (.310)
ADJ. SLOT (.200)
3.05 ± .38
.76 3.56 ± 0.25 2.54
WIDE 2 (.120 ± .015)
(.030) (.140 ± .010) (.100)
X .97 DEEP 4.78 2.54
(.038) Common Dimensions (.188) (.100)
X 3.05 LONG 1 3 Top Adjust Models M,T
(.120) 10.16 3 1
2.54
COMMON TO (.100) (0.40) ADJ. SLOT 2
3386V 2.54 .76 2.54
WIDE
(.100) (.030) (.100)
9.53 5.97 ± .89
X .76 DEEP (.375) (.235 ± .035)
(.030)
X 3.15 LONG 4.83 The Model 3386 is available with a knob for finger
3386K (.124) adjustment. Add suffix letter "T" to order code for
(.190)
2.54 ± .25 2 PLCS. F, P and X terminal styles.
(.100 ± .010) ADJ. SLOT
9.53
3.05 ± .38 5.59 LONG
(.375) .51 ± .05
(.120 ± .015) (.220)
(.020 ± .002)
2 .38 1.02
5.33 5.59 8.38 X WIDE
MIN. (.040)
(.210) (.015) (.220) (.330)
1.40
3 1 4.83 X DEEP
(.055)
(.190)
3386M
90° ± 3°

3386P 2.54
(.100) 1 2 3 10.41 ± .51 6.60
(.410 ± .020) (.260)
4.78 ± .38 2.54
(.188 ± .015) (.100) 3.81
(.150) 3.81
3 1 (.150) 2 WIPER
2
2.54
(.100)
3386T CCW 1 3 CW
CLOCKWISE

.76 ± .38
3.81 1 2 3 (.030 ± .015)
3386R (.150) MM
3.81 2.54 DIMENSIONS:
(INCHES)
(.150) (.100) 2.54
0.25
(.100) TOLERANCES: ± EXCEPT WHERE NOTED
1.22 ± .25 (.010)
(.048 ± .010) 3 2 1

Specifications are subject to change without notice. Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 3386 – 3/8 ˝ Square Trimpot® Trimming Potentiometer

Packaging Specifications How To Order

SIDE ADJUST TOP ADJUST 3386 P - 1 - 103 T __ LF
3386W-1 3386U-1 Model
Style
22.98 ± .076 8.89 ± 0.7 12.70 REF. Standard or Modified
27.56 ± .76 (.350 ± .028)
12.70 (.905 ± .030) (.500) 18.03 ± 0.7 Product Indicator
(1.085 ± .030) REF.
(.500) -1 = Standard Product
(.710 ± .030) -EY5 = Extended Shaft
18 ± .76
(.709 ± .030) 10.16 MIN. Resistance Code
(.400) 3 1
3.81 ± .71 Optional Suffix Letter
1 2 T = Knob**
(.15 ± .028) 3
Packaging Designator
Blank = Tube (Standard)
R = Tape & Reel (W and U Pin Styles Only)
8.89 + .76 /- .50 A = Ammo Pack (W and U Pin Styles Only)
(.350 + .030/ - .020) 18.03 ± 1.5 3.99 ± 0.3
DIA. Tape and reel material meets Antistatic ANSI/
(.710 ± .060) (.157 ± .012)
4.0 ± 0.3
18 + 1.0/ - 0.5 (.157 ± .012) 3.81 ± 0.3 ESD 5541-2003 packaging standards.
(.709 + .040/ - .020) DIA. (.150 ±.028) Terminations
LF = 100 % Tin-plated (RoHS compliant)
12.70 + .30/ - 0.25 12.7 ± 0.3
Blank = 90 % Tin / 10 % Lead-plated
(.500 + .012/ - .010) (.500 ± .012)
(Standard)
4.83 ± .25 **Knob option is available only in standard tube
(.190 ± .010) packaging. Not recommended for side load
9.53 applications.
(.375) Consult factory for other available options.
2.44 ± .25 4.78
(.096 ± .010)
†“Fluorinert” is a registered trademark of 3M Co.
2.54 (.188)
ALL PINS IN-LINE ON
(.100)
CENTER “Trimpot” is a trademark of Bourns, Inc.
2.54
MM .51 ± .05 ALL PINS IN-LINE ON CENTER
DIMENSIONS: (.100)
(INCHES) (.020 ± .002)
MM
DIA. TYP. DIMENSIONS:
1000/REEL/BOX (INCHES)
1000/REEL/BOX

Meets EIA Specification 468.

MM
DIMENSIONS:
(INCHES)

Asia-Pacific: Tel: +886-2 2562-4117 • Email: [email protected]

Europe: Tel: +36 88 885 877 • Email: [email protected]
The Americas: Tel: +1-951 781-5500 • Email: [email protected]
www.bourns.com

REV. 08/19
“Trimpot” is a registered trademark of Bourns, Inc.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
 Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[UV[PJL<ZLYZZOV\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM`[OH[Z\JOPUMVYTH[PVUPZJ\YYLU[
and complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®WYVK\J[PUH\ZLYHWWSPJH[PVUTH`]HY`
MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\L[VP[OLJVTIPUH[PVUVM[OL)V\YUZ® product with other components
PU[OL\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\YUZ®
WYVK\J[HSZVJHUHUKKV]HY`PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\HSWLYMVYTHUJLTH`]HY`V]LY[PTL<ZLYZZOV\SKHS^H`Z]LYPM`
the actual performance of the Bourns®WYVK\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[
Q\KNTLU[ZYLNHYKPUN[OLHTV\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY
KPɈLYLUJLZIL[^LLUSHIVYH[VY`HUKYLHS^VYSKJVUKP[PVUZ

<USLZZ)V\YUZOHZL_WSPJP[S`KLZPNUH[LKHUPUKP]PK\HS)V\YUZ® product as meeting the requirements of a particular industry

Z[HUKHYKLN0:6;:  VYHWHY[PJ\SHYX\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\YUZPZUV[YLZWVUZPISLMVYHU`
MHPS\YLVMHUPUKP]PK\HS)V\YUZ®WYVK\J[[VTLL[[OLYLX\PYLTLU[ZVMZ\JOPUK\Z[Y`Z[HUKHYKVYWHY[PJ\SHYX\HSPÄJH[PVU<ZLYZ
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
[OLPYKL]PJLZVYHWWSPJH[PVUZ

Bourns®WYVK\J[ZHYLUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKMVY\ZLPUU\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\Z[HPUPUN
HWWSPJH[PVUZUVYPUHU`V[OLYHWWSPJH[PVUZ^OLYLMHPS\YLVYTHSM\UJ[PVUTH`YLZ\S[PUWLYZVUHSPUQ\Y`KLH[OVYZL]LYLWYVWLY[`
VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZ
on a case-by-case basis, use of any Bourns®WYVK\J[ZPUZ\JO\UH\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\ZPZH[
[OL\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\KLKL]PJLZPKLU[PÄLKI`[OL<:-VVKHUK+Y\N(KTPUPZ[YH[PVUHZ*SHZZ000
KL]PJLZHUKNLULYHSS`LX\P]HSLU[JSHZZPÄJH[PVUZV\[ZPKLVM[OL<UP[LK:[H[LZ

)V\YUZL_WYLZZS`PKLU[PÄLZ[OVZL)V\YUZ®Z[HUKHYKWYVK\J[Z[OH[HYLZ\P[HISLMVY\ZLPUH\[VTV[P]LHWWSPJH[PVUZVUZ\JO
WYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^V
H\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ®Z[HUKHYKWYVK\J[ZPUHUH\[VTV[P]L
HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\ZLY»ZZVSLYPZR0M)V\YUZ
L_WYLZZS`PKLU[PÄLZHZ\IJH[LNVY`VMH\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\J[ZZ\JOHZPUMV[HPUTLU[
VYSPNO[PUNZ\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\J[HUKOHZKL[LYTPULK[OH[PMZ\JO)V\YUZ®
Z[HUKHYKWYVK\J[PZJVUZPKLYLKMVYWV[LU[PHS\ZLPUH\[VTV[P]LHWWSPJH[PVUZP[ZOV\SKVUS`IL\ZLKPUZ\JOZ\IJH[LNVY`VM
H\[VTV[P]LHWWSPJH[PVUZ(U`YLMLYLUJL[V)V\YUZ®Z[HUKHYKWYVK\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK
VY¸H\[VTV[P]LNYHKL¹KVLZUV[I`P[ZLSMTLHU[OH[)V\YUZOHZHWWYV]LKZ\JOWYVK\J[MVY\ZLPUHUH\[VTV[P]LHWWSPJH[PVU

Bourns®Z[HUKHYKWYVK\J[ZHYLUV[[LZ[LK[VJVTWS`^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS`
VYHU`V[OLYNLULYHSS`LX\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\J[ZKLZPNULKVYTHU\MHJ[\YLKMVY
\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\YUZL_WYLZZS`PKLU[PÄLZ)V\YUZ® standard products that are suitable for use in aircraft
VYZWHJLHWWSPJH[PVUZVUZ\JOWYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`
HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ® standard
WYVK\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[
the user’s sole risk.

;OL\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\YUZ® custom products shall be negotiated on a case-by-case basis by Bourns

and the user for which such Bourns®J\Z[VTWYVK\J[ZHYLZWLJPHSS`KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\YUZ
HUK[OL\ZLYYLNHYKPUN[OL\ZLHUKSL]LSVMZ\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\YUZ® standard products shall
also apply to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns®WYVK\J[ZVY[LJOUVSVN`MVY\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL

KLZPNUKL]LSVWTLU[WYVK\J[PVU\ZLVYZ[VJRWPSPUNVMU\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL`\ZL
Bourns®WYVK\J[ZVY[LJOUVSVN`PUHU`MHJPSP[`^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ
HWWS`[VHSS\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\KPUNLTIHYNVZVYPU[LYUH[PVUHS
YLN\SH[PVUZ-\Y[OLY)V\YUZ® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
WYPVYH\[OVYPaH[PVUMYVT)V\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU`WHY[`UV[LSPNPISL
[VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H

;V[OLTH_PT\TL_[LU[WLYTP[[LKI`HWWSPJHISLSH^)V\YUZKPZJSHPTZPHU`HUKHSSSPHIPSP[`MVYZWLJPHSW\UP[P]LJVUZLX\LU[PHS
PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\LZVYSVZ[WYVÄ[ZHUKPPHU`HUKHSSPTWSPLK^HYYHU[PLZPUJS\KPUNPTWSPLK^HYYHU[PLZ
VMÄ[ULZZMVYWHY[PJ\SHYW\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[`
)RU\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
*9